Syslog support for dracut

This module provides syslog functionality in the initrd.
This is especially interesting when complex configuration being
used to provide access to the device the rootfs resides on.

When this module is installed into the ramfs it is triggered by
the udev event from the nic being setup (online).

Then if syslog is configured it is started and will forward all
kernel messages to the given syslog server.

The syslog implementation is detected automatically by finding the
apropriate binary with the following order:
rsyslogd
syslogd
syslog-ng
Then if detected the syslog.conf is generated and syslog is started.

Bootparameters:
syslogserver=ip    Where to syslog to
sysloglevel=level  What level has to be logged
syslogtype=rsyslog|syslog|syslogng
                   Don't auto detect syslog but set it

diff --git a/modules.d/98syslog/README b/modules.d/98syslog/README
new file mode 100644 (file)
index 0000000..4a0e10b
--- /dev/null
+++ b/modules.d/98syslog/README
@@ -0,0 +1,24 @@
+Syslog support for dracut
+
+This module provides syslog functionality in the initrd.
+This is especially interesting when complex configuration being 
+used to provide access to the device the rootfs resides on.
+
+When this module is installed into the ramfs it is triggered by 
+the udev event from the nic being setup (online).
+
+Then if syslog is configured it is started and will forward all
+kernel messages to the given syslog server.
+
+The syslog implementation is detected automatically by finding the 
+apropriate binary with the following order:
+rsyslogd
+syslogd
+syslog-ng
+Then if detected the syslog.conf is generated and syslog is started.
+
+Bootparameters:
+syslogserver=ip    Where to syslog to
+sysloglevel=level  What level has to be logged
+syslogtype=rsyslog|syslog|syslogng  
+                   Don't auto detect syslog but set it 

diff --git a/modules.d/98syslog/check b/modules.d/98syslog/check
new file mode 100755 (executable)
index 0000000..3b0eb2c
--- /dev/null
+++ b/modules.d/98syslog/check
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+# do not add this module by default
+exit 255

diff --git a/modules.d/98syslog/install b/modules.d/98syslog/install
new file mode 100755 (executable)
index 0000000..bf678d9
--- /dev/null
+++ b/modules.d/98syslog/install
@@ -0,0 +1,21 @@
+#!/bin/sh
+if which rsyslogd >/dev/null; then
+       installs="rsyslogd /usr/lib/rsyslog/lmnet.so /usr/lib/rsyslog/imklog.so /usr/lib/rsyslog/imuxsock.so"
+elif which syslogd >/dev/null; then
+    installs="syslogd"
+elif which syslog-ng >/dev/null; then
+    installs="syslog-ng"
+else
+    dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
+fi
+if [ -n "$installs" ]; then
+   dracut_install cat
+   dracut_install $installs
+   inst_hook cmdline  90 "$moddir/parse-syslog-opts.sh"
+   inst_hook pre-udev 61 "$moddir/syslog-genrules.sh"
+   inst_hook pre-pivot 99 "$moddir/syslog-cleanup.sh"
+   inst_simple "$moddir/rsyslogd-start.sh" /sbin/rsyslogd-start
+   inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
+   mkdir -p ${initdir}/etc/templates
+   inst_simple "${moddir}/rsyslog.conf" /etc/templates
+fi
\ No newline at end of file

diff --git a/modules.d/98syslog/parse-syslog-opts.sh b/modules.d/98syslog/parse-syslog-opts.sh
new file mode 100755 (executable)
index 0000000..0ec3015
--- /dev/null
+++ b/modules.d/98syslog/parse-syslog-opts.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+# Parses the syslog commandline options
+#
+#Bootparameters:
+#syslogserver=ip    Where to syslog to
+#sysloglevel=level  What level has to be logged
+#syslogtype=rsyslog|syslog|syslogng  
+#                   Don't auto detect syslog but set it
+if getarg rdnetdebug ; then
+    exec >/tmp/syslog-parse-opts.$1.$$.out
+    exec 2>>/tmp/syslog-parse-opts.$1.$$.out
+    set -x
+fi
+
+syslogserver=$(getarg syslog)
+syslogfilters=$(getargs filter)
+syslogtype=$(getarg syslogtype)
+
+[ -n "$syslogserver" ] && echo $syslogserver > /tmp/syslog.server
+[ -n "$syslogfilters" ] && echo "$syslogfilters" > /tmp/syslog.filters
+[ -n "$syslogtype" ] && echo "$syslogtype" > /tmp/syslog.type

diff --git a/modules.d/98syslog/rsyslog.conf b/modules.d/98syslog/rsyslog.conf
new file mode 100644 (file)
index 0000000..218072b
--- /dev/null
+++ b/modules.d/98syslog/rsyslog.conf
@@ -0,0 +1,31 @@
+#rsyslog v3 config file
+
+# if you experience problems, check
+# http://www.rsyslog.com/troubleshoot for assistance
+
+#### MODULES ####
+
+$ModLoad imuxsock.so    # provides support for local system logging (e.g. via logger command)
+$ModLoad imklog.so      # provides kernel logging support (previously done by rklogd)
+#$ModLoad immark.so     # provides --MARK-- message capability
+
+# Provides UDP syslog reception
+#$ModLoad imudp.so
+#$UDPServerRun 514
+
+# Provides TCP syslog reception
+#$ModLoad imtcp.so
+#$InputTCPServerRun 514
+
+
+#### GLOBAL DIRECTIVES ####
+
+# Use default timestamp format
+$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+# File syncing capability is disabled by default. This feature is usually not required,
+# not useful and an extreme performance hit
+#$ActionFileEnableSync on
+
+
+#### RULES ####

diff --git a/modules.d/98syslog/rsyslogd-start.sh b/modules.d/98syslog/rsyslogd-start.sh
new file mode 100755 (executable)
index 0000000..f9e45fc
--- /dev/null
+++ b/modules.d/98syslog/rsyslogd-start.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+# Triggered by udev and starts rsyslogd with bootparameters
+. /lib/dracut-lib.sh
+
+if getarg rdnetdebug ; then
+    exec >/tmp/rsyslogd-start.$1.$$.out
+    exec 2>>/tmp/rsyslogd-start.$1.$$.out
+    set -x
+fi
+
+rsyslog_config() {
+       local server=$1
+       shift
+       local syslog_template=$1
+       shift
+    local filters=$*
+    local filter=
+    
+    cat $syslog_template
+
+       for filter in $filters; do
+          echo "${filter} @${server}"
+    done
+#      echo "*.* /tmp/syslog"
+}
+
+read server < /tmp/syslog.server
+read filters < /tmp/syslog.filter
+[ -z "$filters" ] && filters="kern.*"
+read conf < /tmp/syslog.conf
+[ -z "$conf" ] && conf="/etc/rsyslog.conf" && echo "$conf" > /tmp/syslog.conf
+
+template=/etc/templates/rsyslog.conf
+if [ -n "$server" ]; then
+   rsyslog_config "$server" "$template" "$filters" > $conf
+   /sbin/rsyslogd -c3
+fi 
\ No newline at end of file

diff --git a/modules.d/98syslog/rsyslogd-stop.sh b/modules.d/98syslog/rsyslogd-stop.sh
new file mode 100755 (executable)
index 0000000..a46240f
--- /dev/null
+++ b/modules.d/98syslog/rsyslogd-stop.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+# Kills rsyslogd
+
+if [ -f /var/run/syslogd.pid ]; then
+       read pid < /var/run/syslogd.pid
+       kill $pid
+       kill -0 $pid && kill -9 $pid
+else
+    warn "rsyslogd-stop: Could not find a pid for rsyslogd. Won't kill it."
+fi
\ No newline at end of file

diff --git a/modules.d/98syslog/syslog-cleanup.sh b/modules.d/98syslog/syslog-cleanup.sh
new file mode 100755 (executable)
index 0000000..8fdf21b
--- /dev/null
+++ b/modules.d/98syslog/syslog-cleanup.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+# Just cleans up a previously started syslogd
+. /lib/dracut-lib.sh
+
+
+if getarg rdnetdebug ; then
+    exec >/tmp/syslog-cleanup.$1.$$.out
+    exec 2>>/tmp/syslog-cleanup.$1.$$.out
+    set -x
+fi
+
+if [ -f /tmp/syslog.server ]; then
+       read syslogtype < /tmp/syslog.type
+       if [ -e "/sbin/${syslogtype}-stop" ]; then
+               ${syslogtype}-stop
+       else
+               warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped."
+       fi
+fi
\ No newline at end of file

diff --git a/modules.d/98syslog/syslog-genrules.sh b/modules.d/98syslog/syslog-genrules.sh
new file mode 100755 (executable)
index 0000000..740739b
--- /dev/null
+++ b/modules.d/98syslog/syslog-genrules.sh
@@ -0,0 +1,35 @@
+#!/bin/dash
+# Creates the syslog udev rules to be triggered when interface becomes online.
+. /lib/dracut-lib.sh
+
+detect_syslog() {
+    syslogtype=""
+    if [ -e /sbin/rsyslogd ]; then
+          syslogtype="rsyslogd"
+    elif [ -e /sbin/syslogd ]; then
+       syslogtype="syslogd"
+    elif [ /sbin/syslog-ng ]; then
+       syslogtype="syslog-ng"
+    else
+       dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
+    fi
+    echo "$syslogtype"
+    [ -n "$syslogtype" ]
+}      
+
+if getarg rdnetdebug ; then
+    exec >/tmp/syslog-genrules.$1.$$.out
+    exec 2>>/tmp/syslog-genrules.$1.$$.out
+    set -x
+fi
+
+read syslogtype < /tmp/syslog.type
+if [ -z "$syslogtype" ]; then
+       syslogtype=$(detect_syslog)
+       echo $syslogtype > /tmp/syslog.type
+fi
+if [ -e "/sbin/${syslogtype}-start" ]; then
+       printf 'ACTION=="online", SUBSYSTEM=="net", RUN+="/sbin/'${syslogtype}'-start $env{INTERFACE}"\n' > /etc/udev/rules.d/70-syslog.rules
+else
+       warn "syslog-genrules: Could not find binary to start syslog of type \"$syslogtype\". Syslog will not be started."
+fi