# Makefile for Display Core (dc) component.
#
-DC_LIBS = basics bios calcs dce \
-gpio gpu i2caux irq virtual
+DC_LIBS = basics bios calcs dce gpio i2caux irq virtual
DC_LIBS += dce112
DC_LIBS += dce110
include $(AMD_DC)
-DISPLAY_CORE = dc.o dc_link.o dc_resource.o dc_hw_sequencer.o dc_target.o dc_sink.o dc_stream.o \
-dc_surface.o dc_link_hwss.o dc_link_dp.o dc_link_ddc.o dc_debug.o
+DISPLAY_CORE = dc.o dc_link.o dc_resource.o dc_hw_sequencer.o dc_target.o dc_sink.o \
+dc_surface.o dc_link_hwss.o dc_link_dp.o dc_link_ddc.o dc_debug.o dc_stream.o
AMD_DISPLAY_CORE = $(addprefix $(AMDDALPATH)/dc/core/,$(DISPLAY_CORE))
#include "bios_parser_interface.h"
#include "dc.h"
+#define TO_DCE_CLOCKS(clocks)\
+ container_of(clocks, struct dce_disp_clk, base)
#define REG(reg) \
(clk_dce->regs->reg)
#define CTX \
clk_dce->base.ctx
+/* Max clock values for each state indexed by "enum clocks_state": */
+static struct state_dependent_clocks dce80_max_clks_by_state[] = {
+/* ClocksStateInvalid - should not be used */
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/* ClocksStateUltraLow - not expected to be used for DCE 8.0 */
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/* ClocksStateLow */
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000},
+/* ClocksStateNominal */
+{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 },
+/* ClocksStatePerformance */
+{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 } };
+
+static struct state_dependent_clocks dce110_max_clks_by_state[] = {
+/*ClocksStateInvalid - should not be used*/
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000 },
+/*ClocksStateLow*/
+{ .display_clk_khz = 352000, .pixel_clk_khz = 330000 },
+/*ClocksStateNominal*/
+{ .display_clk_khz = 467000, .pixel_clk_khz = 400000 },
+/*ClocksStatePerformance*/
+{ .display_clk_khz = 643000, .pixel_clk_khz = 400000 } };
+
+static struct state_dependent_clocks dce112_max_clks_by_state[] = {
+/*ClocksStateInvalid - should not be used*/
+{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
+/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
+{ .display_clk_khz = 389189, .pixel_clk_khz = 346672 },
+/*ClocksStateLow*/
+{ .display_clk_khz = 459000, .pixel_clk_khz = 400000 },
+/*ClocksStateNominal*/
+{ .display_clk_khz = 667000, .pixel_clk_khz = 600000 },
+/*ClocksStatePerformance*/
+{ .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } };
+
/* Starting point for each divider range.*/
-enum divider_range_start {
+enum dce_divider_range_start {
DIVIDER_RANGE_01_START = 200, /* 2.00*/
DIVIDER_RANGE_02_START = 1600, /* 16.00*/
DIVIDER_RANGE_03_START = 3200, /* 32.00*/
/* Ranges for divider identifiers (Divider ID or DID)
mmDENTIST_DISPCLK_CNTL.DENTIST_DISPCLK_WDIVIDER*/
-enum divider_id_register_setting {
+enum dce_divider_id_register_setting {
DIVIDER_RANGE_01_BASE_DIVIDER_ID = 0X08,
DIVIDER_RANGE_02_BASE_DIVIDER_ID = 0X40,
DIVIDER_RANGE_03_BASE_DIVIDER_ID = 0X60,
/* Step size between each divider within a range.
Incrementing the DENTIST_DISPCLK_WDIVIDER by one
will increment the divider by this much.*/
-enum divider_range_step_size {
+enum dce_divider_range_step_size {
DIVIDER_RANGE_01_STEP_SIZE = 25, /* 0.25*/
DIVIDER_RANGE_02_STEP_SIZE = 50, /* 0.50*/
DIVIDER_RANGE_03_STEP_SIZE = 100 /* 1.00 */
};
+static bool dce_divider_range_construct(
+ struct dce_divider_range *div_range,
+ int range_start,
+ int range_step,
+ int did_min,
+ int did_max)
+{
+ div_range->div_range_start = range_start;
+ div_range->div_range_step = range_step;
+ div_range->did_min = did_min;
+ div_range->did_max = did_max;
+
+ if (div_range->div_range_step == 0) {
+ div_range->div_range_step = 1;
+ /*div_range_step cannot be zero*/
+ BREAK_TO_DEBUGGER();
+ }
+ /* Calculate this based on the other inputs.*/
+ /* See DividerRange.h for explanation of */
+ /* the relationship between divider id (DID) and a divider.*/
+ /* Number of Divider IDs = (Maximum Divider ID - Minimum Divider ID)*/
+ /* Maximum divider identified in this range =
+ * (Number of Divider IDs)*Step size between dividers
+ * + The start of this range.*/
+ div_range->div_range_end = (did_max - did_min) * range_step
+ + range_start;
+ return true;
+}
+
+static int dce_divider_range_calc_divider(
+ struct dce_divider_range *div_range,
+ int did)
+{
+ /* Is this DID within our range?*/
+ if ((did < div_range->did_min) || (did >= div_range->did_max))
+ return INVALID_DIVIDER;
+
+ return ((did - div_range->did_min) * div_range->div_range_step)
+ + div_range->div_range_start;
+
+}
+
+static int dce_divider_range_calc_did(
+ struct dce_divider_range *div_range,
+ int div)
+{
+ int did;
+ /* Check before dividing.*/
+ if (div_range->div_range_step == 0) {
+ div_range->div_range_step = 1;
+ /*div_range_step cannot be zero*/
+ BREAK_TO_DEBUGGER();
+ }
+ /* Is this divider within our range?*/
+ if ((div < div_range->div_range_start)
+ || (div >= div_range->div_range_end))
+ return INVALID_DID;
+/* did = (divider - range_start + (range_step-1)) / range_step) + did_min*/
+ did = div - div_range->div_range_start;
+ did += div_range->div_range_step - 1;
+ did /= div_range->div_range_step;
+ did += div_range->did_min;
+ return did;
+}
+
+static int dce_divider_range_get_divider(
+ struct dce_divider_range *div_range,
+ int ranges_num,
+ int did)
+{
+ int div = INVALID_DIVIDER;
+ int i;
-static uint32_t dce_clocks_get_dp_ref_freq(struct display_clock *clk)
+ for (i = 0; i < ranges_num; i++) {
+ /* Calculate divider with given divider ID*/
+ div = dce_divider_range_calc_divider(&div_range[i], did);
+ /* Found a valid return divider*/
+ if (div != INVALID_DIVIDER)
+ break;
+ }
+ return div;
+}
+
+static int dce_divider_range_get_did(
+ struct dce_divider_range *div_range,
+ int ranges_num,
+ int divider)
+{
+ int did = INVALID_DID;
+ int i;
+
+ for (i = 0; i < ranges_num; i++) {
+ /* CalcDid returns InvalidDid if a divider ID isn't found*/
+ did = dce_divider_range_calc_did(&div_range[i], divider);
+ /* Found a valid return did*/
+ if (did != INVALID_DID)
+ break;
+ }
+ return did;
+}
+
+static int dce_clocks_get_dp_ref_freq(struct display_clock *clk)
{
struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
int dprefclk_wdivider;
REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, &dprefclk_wdivider);
/* Convert DENTIST_DPREFCLK_WDIVIDERto actual divider*/
- target_div = dal_divider_range_get_divider(
+ target_div = dce_divider_range_get_divider(
clk_dce->divider_ranges,
DIVIDER_RANGE_MAX,
dprefclk_wdivider);
static void dce_set_clock(
struct display_clock *clk,
- uint32_t requested_clk_khz)
+ int requested_clk_khz)
{
struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
struct bp_pixel_clock_parameters pxl_clk_params = { 0 };
static void dce_psr_set_clock(
struct display_clock *clk,
- uint32_t requested_clk_khz)
+ int requested_clk_khz)
{
struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
dce_psr_wait_loop(clk_dce, requested_clk_khz);
}
-static void polaris_set_clock(
+static void dce112_set_clock(
struct display_clock *clk,
- uint32_t requested_clk_khz)
+ int requested_clk_khz)
{
struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
struct bp_set_dce_clock_parameters dce_clk_params;
/* Make sure requested clock isn't lower than minimum threshold*/
if (requested_clk_khz > 0)
requested_clk_khz = dm_max(requested_clk_khz,
- clk_dce->dentist_vco_freq_khz / 64);
+ clk_dce->dentist_vco_freq_khz / 62);
dce_clk_params.target_clock_frequency = requested_clk_khz;
dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
/*VBIOS will determine DPREFCLK frequency, so we don't set it*/
dce_clk_params.target_clock_frequency = 0;
dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK;
- dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = 0;
+ dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK =
+ (dce_clk_params.pll_id ==
+ CLOCK_SOURCE_COMBO_DISPLAY_PLL0);
bp->funcs->set_dce_clock(bp, &dce_clk_params);
}
.get_dp_ref_clk_frequency = dce_clocks_get_dp_ref_freq,
.get_required_clocks_state = dce_get_required_clocks_state,
.set_min_clocks_state = dce_clock_set_min_clocks_state,
- .set_clock = polaris_set_clock
+ .set_clock = dce112_set_clock
};
static const struct display_clock_funcs dce110_funcs = {
dce_clock_read_integrated_info(clk_dce);
dce_clock_read_ss_info(clk_dce);
- dal_divider_range_construct(
+ dce_divider_range_construct(
&clk_dce->divider_ranges[DIVIDER_RANGE_01],
DIVIDER_RANGE_01_START,
DIVIDER_RANGE_01_STEP_SIZE,
DIVIDER_RANGE_01_BASE_DIVIDER_ID,
DIVIDER_RANGE_02_BASE_DIVIDER_ID);
- dal_divider_range_construct(
+ dce_divider_range_construct(
&clk_dce->divider_ranges[DIVIDER_RANGE_02],
DIVIDER_RANGE_02_START,
DIVIDER_RANGE_02_STEP_SIZE,
DIVIDER_RANGE_02_BASE_DIVIDER_ID,
DIVIDER_RANGE_03_BASE_DIVIDER_ID);
- dal_divider_range_construct(
+ dce_divider_range_construct(
&clk_dce->divider_ranges[DIVIDER_RANGE_03],
DIVIDER_RANGE_03_START,
DIVIDER_RANGE_03_STEP_SIZE,
return NULL;
}
+ memcpy(clk_dce->max_clks_by_state,
+ dce80_max_clks_by_state,
+ sizeof(dce80_max_clks_by_state));
+
dce_disp_clk_construct(
clk_dce, ctx, regs, clk_shift, clk_mask);
return NULL;
}
+ memcpy(clk_dce->max_clks_by_state,
+ dce110_max_clks_by_state,
+ sizeof(dce110_max_clks_by_state));
+
dce_disp_clk_construct(
clk_dce, ctx, regs, clk_shift, clk_mask);
return NULL;
}
+ memcpy(clk_dce->max_clks_by_state,
+ dce112_max_clks_by_state,
+ sizeof(dce112_max_clks_by_state));
+
dce_disp_clk_construct(
clk_dce, ctx, regs, clk_shift, clk_mask);
#ifndef _DCE_CLOCKS_H_
#define _DCE_CLOCKS_H_
-#include "display_clock_interface.h"
-#include "../gpu/divider_range.h"
-
-
-#define TO_DCE_CLOCKS(clocks)\
- container_of(clocks, struct dce_disp_clk, base)
+#include "display_clock.h"
#define CLK_COMMON_REG_LIST_DCE_BASE() \
.DPREFCLK_CNTL = mmDPREFCLK_CNTL, \
};
/* Array identifiers and count for the divider ranges.*/
-enum divider_range_count {
+enum dce_divider_range_count {
DIVIDER_RANGE_01 = 0,
DIVIDER_RANGE_02,
DIVIDER_RANGE_03,
DIVIDER_RANGE_MAX /* == 3*/
};
+enum dce_divider_error_types {
+ INVALID_DID = 0,
+ INVALID_DIVIDER = 1
+};
+
+struct dce_divider_range {
+ int div_range_start;
+ /* The end of this range of dividers.*/
+ int div_range_end;
+ /* The distance between each divider in this range.*/
+ int div_range_step;
+ /* The divider id for the lowest divider.*/
+ int did_min;
+ /* The divider id for the highest divider.*/
+ int did_max;
+};
+
struct dce_disp_clk {
struct display_clock base;
const struct dce_disp_clk_registers *regs;
const struct dce_disp_clk_mask *clk_mask;
struct state_dependent_clocks max_clks_by_state[DM_PP_CLOCKS_MAX_STATES];
- struct divider_range divider_ranges[DIVIDER_RANGE_MAX];
+ struct dce_divider_range divider_ranges[DIVIDER_RANGE_MAX];
bool use_max_disp_clk;
- uint32_t dentist_vco_freq_khz;
+ int dentist_vco_freq_khz;
/* Cache the status of DFS-bypass feature*/
bool dfs_bypass_enabled;
/* Cache the display clock returned by VBIOS if DFS-bypass is enabled.
* This is basically "Crystal Frequency In KHz" (XTALIN) frequency */
- uint32_t dfs_bypass_disp_clk;
+ int dfs_bypass_disp_clk;
/* Flag for Enabled SS on GPU PLL */
bool ss_on_gpu_pll;
/* GPU PLL SS percentage (if down-spread enabled) */
- uint32_t gpu_pll_ss_percentage;
+ int gpu_pll_ss_percentage;
/* GPU PLL SS percentage Divider (100 or 1000) */
- uint32_t gpu_pll_ss_divider;
+ int gpu_pll_ss_divider;
};
+++ /dev/null
-#
-# Makefile for the 'gpu' sub-component of DAL.
-# It provides the control and status of HW adapter resources,
-# that are global for the ASIC and sharable between pipes.
-
-GPU = divider_range.o
-
-AMD_DAL_GPU = $(addprefix $(AMDDALPATH)/dc/gpu/,$(GPU))
-
-AMD_DISPLAY_FILES += $(AMD_DAL_GPU)
-
-###############################################################################
-# DCE 110 family
-###############################################################################
-
-GPU_DCE112 = display_clock_dce112.o
-
-AMD_DAL_GPU_DCE112 = $(addprefix $(AMDDALPATH)/dc/gpu/dce112/,$(GPU_DCE112))
-
-AMD_DISPLAY_FILES += $(AMD_DAL_GPU_DCE110) $(AMD_DAL_GPU_DCE112)
-
+++ /dev/null
-/*
- * Copyright 2012-15 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: AMD
- *
- */
-
-#include "dm_services.h"
-
-#include "dce/dce_11_2_d.h"
-#include "dce/dce_11_2_sh_mask.h"
-
-#include "include/bios_parser_interface.h"
-#include "include/fixed32_32.h"
-#include "include/logger_interface.h"
-
-#include "../divider_range.h"
-
-#include "display_clock_dce112.h"
-
-#define FROM_DISPLAY_CLOCK(base) \
- container_of(base, struct display_clock_dce112, disp_clk_base)
-
-static struct state_dependent_clocks max_clks_by_state[] = {
-/*ClocksStateInvalid - should not be used*/
-{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
-/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
-{ .display_clk_khz = 389189, .pixel_clk_khz = 346672 },
-/*ClocksStateLow*/
-{ .display_clk_khz = 459000, .pixel_clk_khz = 400000 },
-/*ClocksStateNominal*/
-{ .display_clk_khz = 667000, .pixel_clk_khz = 600000 },
-/*ClocksStatePerformance*/
-{ .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } };
-
-/* Ranges for divider identifiers (Divider ID or DID)
- mmDENTIST_DISPCLK_CNTL.DENTIST_DISPCLK_WDIVIDER*/
-enum divider_id_register_setting {
- DIVIDER_RANGE_01_BASE_DIVIDER_ID = 0X08,
- DIVIDER_RANGE_02_BASE_DIVIDER_ID = 0X40,
- DIVIDER_RANGE_03_BASE_DIVIDER_ID = 0X60,
- DIVIDER_RANGE_MAX_DIVIDER_ID = 0X80
-};
-
-/* Step size between each divider within a range.
- Incrementing the DENTIST_DISPCLK_WDIVIDER by one
- will increment the divider by this much.*/
-enum divider_range_step_size {
- DIVIDER_RANGE_01_STEP_SIZE = 25, /* 0.25*/
- DIVIDER_RANGE_02_STEP_SIZE = 50, /* 0.50*/
- DIVIDER_RANGE_03_STEP_SIZE = 100 /* 1.00 */
-};
-
-static struct divider_range divider_ranges[DIVIDER_RANGE_MAX];
-
-
-void dispclk_dce112_destroy(struct display_clock **base)
-{
- struct display_clock_dce112 *dc112;
-
- dc112 = DCLCK112_FROM_BASE(*base);
-
- dm_free(dc112);
-
- *base = NULL;
-}
-
-static bool display_clock_integrated_info_construct(
- struct display_clock_dce112 *disp_clk)
-{
- struct integrated_info info;
- uint32_t i;
- struct display_clock *base = &disp_clk->disp_clk_base;
-
- memset(&info, 0, sizeof(struct integrated_info));
-
- disp_clk->dentist_vco_freq_khz = info.dentist_vco_freq;
- if (disp_clk->dentist_vco_freq_khz == 0)
- disp_clk->dentist_vco_freq_khz = 3600000;
-
- base->min_display_clk_threshold_khz =
- disp_clk->dentist_vco_freq_khz / 64;
-
- /*update the maximum display clock for each power state*/
- for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) {
- enum dm_pp_clocks_state clk_state = DM_PP_CLOCKS_STATE_INVALID;
-
- switch (i) {
- case 0:
- clk_state = DM_PP_CLOCKS_STATE_ULTRA_LOW;
- break;
-
- case 1:
- clk_state = DM_PP_CLOCKS_STATE_LOW;
- break;
-
- case 2:
- clk_state = DM_PP_CLOCKS_STATE_NOMINAL;
- break;
-
- case 3:
- clk_state = DM_PP_CLOCKS_STATE_PERFORMANCE;
- break;
-
- default:
- clk_state = DM_PP_CLOCKS_STATE_INVALID;
- break;
- }
-
- /*Do not allow bad VBIOS/SBIOS to override with invalid values,
- * check for > 100MHz*/
- if (info.disp_clk_voltage[i].max_supported_clk >= 100000) {
- (disp_clk->max_clks_by_state + clk_state)->
- display_clk_khz =
- info.disp_clk_voltage[i].max_supported_clk;
- }
- }
-
- return true;
-}
-
-void dce112_set_clock(
- struct display_clock *base,
- uint32_t requested_clk_khz)
-{
- struct bp_set_dce_clock_parameters dce_clk_params;
- struct dc_bios *bp = base->ctx->dc_bios;
-
- /* Prepare to program display clock*/
- memset(&dce_clk_params, 0, sizeof(dce_clk_params));
-
- /* Make sure requested clock isn't lower than minimum threshold*/
- if (requested_clk_khz > 0)
- requested_clk_khz = dm_max(requested_clk_khz,
- base->min_display_clk_threshold_khz);
-
- dce_clk_params.target_clock_frequency = requested_clk_khz;
- dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
- dce_clk_params.clock_type = DCECLOCK_TYPE_DISPLAY_CLOCK;
-
- bp->funcs->set_dce_clock(bp, &dce_clk_params);
-
- /* from power down, we need mark the clock state as ClocksStateNominal
- * from HWReset, so when resume we will call pplib voltage regulator.*/
- if (requested_clk_khz == 0)
- base->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
-
- /*Program DP ref Clock*/
- /*VBIOS will determine DPREFCLK frequency, so we don't set it*/
- dce_clk_params.target_clock_frequency = 0;
- dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK;
- dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK =
- (dce_clk_params.pll_id ==
- CLOCK_SOURCE_COMBO_DISPLAY_PLL0);
-
- bp->funcs->set_dce_clock(bp, &dce_clk_params);
-}
-
-static const struct display_clock_funcs funcs = {
- .destroy = dispclk_dce112_destroy,
- .set_clock = dce112_set_clock,
-};
-
-bool dal_display_clock_dce112_construct(
- struct display_clock_dce112 *dc112,
- struct dc_context *ctx)
-{
- struct display_clock *dc_base = &dc112->disp_clk_base;
-
- dc_base->ctx = ctx;
- dc_base->min_display_clk_threshold_khz = 0;
-
- dc_base->cur_min_clks_state = DM_PP_CLOCKS_STATE_INVALID;
-
- dc_base->funcs = &funcs;
-
- dc112->dfs_bypass_disp_clk = 0;
-
- if (!display_clock_integrated_info_construct(dc112))
- dm_logger_write(dc_base->ctx->logger, LOG_WARNING,
- "Cannot obtain VBIOS integrated info\n");
-
- dc112->gpu_pll_ss_percentage = 0;
- dc112->gpu_pll_ss_divider = 1000;
- dc112->ss_on_gpu_pll = false;
-
-/* Initially set max clocks state to nominal. This should be updated by
- * via a pplib call to DAL IRI eventually calling a
- * DisplayEngineClock_dce112::StoreMaxClocksState(). This call will come in
- * on PPLIB init. This is from DCE5x. in case HW wants to use mixed method.*/
- dc_base->max_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
-
- dc112->disp_clk_base.min_display_clk_threshold_khz =
- (dc112->dentist_vco_freq_khz / 62);
-
- dal_divider_range_construct(
- ÷r_ranges[DIVIDER_RANGE_01],
- DIVIDER_RANGE_01_START,
- DIVIDER_RANGE_01_STEP_SIZE,
- DIVIDER_RANGE_01_BASE_DIVIDER_ID,
- DIVIDER_RANGE_02_BASE_DIVIDER_ID);
- dal_divider_range_construct(
- ÷r_ranges[DIVIDER_RANGE_02],
- DIVIDER_RANGE_02_START,
- DIVIDER_RANGE_02_STEP_SIZE,
- DIVIDER_RANGE_02_BASE_DIVIDER_ID,
- DIVIDER_RANGE_03_BASE_DIVIDER_ID);
- dal_divider_range_construct(
- ÷r_ranges[DIVIDER_RANGE_03],
- DIVIDER_RANGE_03_START,
- DIVIDER_RANGE_03_STEP_SIZE,
- DIVIDER_RANGE_03_BASE_DIVIDER_ID,
- DIVIDER_RANGE_MAX_DIVIDER_ID);
-
- {
- uint32_t ss_info_num =
- ctx->dc_bios->funcs->
- get_ss_entry_number(ctx->dc_bios, AS_SIGNAL_TYPE_GPU_PLL);
-
- if (ss_info_num) {
- struct spread_spectrum_info info;
- bool result;
-
- memset(&info, 0, sizeof(info));
-
- result =
- (BP_RESULT_OK == ctx->dc_bios->funcs->
- get_spread_spectrum_info(ctx->dc_bios,
- AS_SIGNAL_TYPE_GPU_PLL, 0, &info)) ? true : false;
-
-
- /* Based on VBIOS, VBIOS will keep entry for GPU PLL SS
- * even if SS not enabled and in that case
- * SSInfo.spreadSpectrumPercentage !=0 would be sign
- * that SS is enabled
- */
- if (result && info.spread_spectrum_percentage != 0) {
- dc112->ss_on_gpu_pll = true;
- dc112->gpu_pll_ss_divider =
- info.spread_percentage_divider;
-
- if (info.type.CENTER_MODE == 0) {
- /* Currently for DP Reference clock we
- * need only SS percentage for
- * downspread */
- dc112->gpu_pll_ss_percentage =
- info.spread_spectrum_percentage;
- }
- }
-
- }
- }
-
- dc112->use_max_disp_clk = true;
- dc112->max_clks_by_state = max_clks_by_state;
-
- return true;
-}
-
+++ /dev/null
-/*
- * Copyright 2012-15 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: AMD
- *
- */
-#ifndef __DAL_DISPLAY_CLOCK_DCE112_H__
-#define __DAL_DISPLAY_CLOCK_DCE112_H__
-
-#include "display_clock_interface.h"
-
-struct display_clock_dce112 {
- struct display_clock disp_clk_base;
- bool use_max_disp_clk;
- uint32_t dentist_vco_freq_khz;
- /* Cache the status of DFS-bypass feature*/
- bool dfs_bypass_enabled;
- /* GPU PLL SS percentage (if down-spread enabled) */
- uint32_t gpu_pll_ss_percentage;
- /* GPU PLL SS percentage Divider (100 or 1000) */
- uint32_t gpu_pll_ss_divider;
- /* Flag for Enabled SS on GPU PLL */
- bool ss_on_gpu_pll;
- /* Cache the display clock returned by VBIOS if DFS-bypass is enabled.
- * This is basically "Crystal Frequency In KHz" (XTALIN) frequency */
- uint32_t dfs_bypass_disp_clk;
- struct state_dependent_clocks *max_clks_by_state;
-
-};
-
-#define DCLCK112_FROM_BASE(dc_base) \
- container_of(dc_base, struct display_clock_dce112, disp_clk_base)
-
-/* Array identifiers and count for the divider ranges.*/
-enum divider_range_count {
- DIVIDER_RANGE_01 = 0,
- DIVIDER_RANGE_02,
- DIVIDER_RANGE_03,
- DIVIDER_RANGE_MAX /* == 3*/
-};
-
-/* Starting point for each divider range.*/
-enum divider_range_start {
- DIVIDER_RANGE_01_START = 200, /* 2.00*/
- DIVIDER_RANGE_02_START = 1600, /* 16.00*/
- DIVIDER_RANGE_03_START = 3200, /* 32.00*/
- DIVIDER_RANGE_SCALE_FACTOR = 100 /* Results are scaled up by 100.*/
-};
-
-bool dal_display_clock_dce112_construct(
- struct display_clock_dce112 *dc112,
- struct dc_context *ctx);
-
-void dispclk_dce112_destroy(struct display_clock **base);
-
-void dce112_set_clock(
- struct display_clock *base,
- uint32_t requested_clk_khz);
-
-
-#endif /* __DAL_DISPLAY_CLOCK_DCE112_H__ */
+++ /dev/null
-/*
- * Copyright 2012-15 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: AMD
- *
- */
-#include "dm_services.h"
-#include "divider_range.h"
-
-bool dal_divider_range_construct(
- struct divider_range *div_range,
- uint32_t range_start,
- uint32_t range_step,
- uint32_t did_min,
- uint32_t did_max)
-{
- div_range->div_range_start = range_start;
- div_range->div_range_step = range_step;
- div_range->did_min = did_min;
- div_range->did_max = did_max;
-
- if (div_range->div_range_step == 0) {
- div_range->div_range_step = 1;
- /*div_range_step cannot be zero*/
- BREAK_TO_DEBUGGER();
- }
- /* Calculate this based on the other inputs.*/
- /* See DividerRange.h for explanation of */
- /* the relationship between divider id (DID) and a divider.*/
- /* Number of Divider IDs = (Maximum Divider ID - Minimum Divider ID)*/
- /* Maximum divider identified in this range =
- * (Number of Divider IDs)*Step size between dividers
- * + The start of this range.*/
- div_range->div_range_end = (did_max - did_min) * range_step
- + range_start;
- return true;
-}
-
-static uint32_t dal_divider_range_calc_divider(
- struct divider_range *div_range,
- uint32_t did)
-{
- /* Is this DID within our range?*/
- if ((did < div_range->did_min) || (did >= div_range->did_max))
- return INVALID_DIVIDER;
-
- return ((did - div_range->did_min) * div_range->div_range_step)
- + div_range->div_range_start;
-
-}
-
-static uint32_t dal_divider_range_calc_did(
- struct divider_range *div_range,
- uint32_t div)
-{
- uint32_t did;
- /* Check before dividing.*/
- if (div_range->div_range_step == 0) {
- div_range->div_range_step = 1;
- /*div_range_step cannot be zero*/
- BREAK_TO_DEBUGGER();
- }
- /* Is this divider within our range?*/
- if ((div < div_range->div_range_start)
- || (div >= div_range->div_range_end))
- return INVALID_DID;
-/* did = (divider - range_start + (range_step-1)) / range_step) + did_min*/
- did = div - div_range->div_range_start;
- did += div_range->div_range_step - 1;
- did /= div_range->div_range_step;
- did += div_range->did_min;
- return did;
-}
-
-uint32_t dal_divider_range_get_divider(
- struct divider_range *div_range,
- uint32_t ranges_num,
- uint32_t did)
-{
- uint32_t div = INVALID_DIVIDER;
- uint32_t i;
-
- for (i = 0; i < ranges_num; i++) {
- /* Calculate divider with given divider ID*/
- div = dal_divider_range_calc_divider(&div_range[i], did);
- /* Found a valid return divider*/
- if (div != INVALID_DIVIDER)
- break;
- }
- return div;
-}
-uint32_t dal_divider_range_get_did(
- struct divider_range *div_range,
- uint32_t ranges_num,
- uint32_t divider)
-{
- uint32_t did = INVALID_DID;
- uint32_t i;
-
- for (i = 0; i < ranges_num; i++) {
- /* CalcDid returns InvalidDid if a divider ID isn't found*/
- did = dal_divider_range_calc_did(&div_range[i], divider);
- /* Found a valid return did*/
- if (did != INVALID_DID)
- break;
- }
- return did;
-}
-
+++ /dev/null
-/*
- * Copyright 2012-15 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: AMD
- *
- */
-
-#ifndef __DAL_DIVIDER_RANGE_H__
-#define __DAL_DIVIDER_RANGE_H__
-
-enum divider_error_types {
- INVALID_DID = 0,
- INVALID_DIVIDER = 1
-};
-
-struct divider_range {
- uint32_t div_range_start;
- /* The end of this range of dividers.*/
- uint32_t div_range_end;
- /* The distance between each divider in this range.*/
- uint32_t div_range_step;
- /* The divider id for the lowest divider.*/
- uint32_t did_min;
- /* The divider id for the highest divider.*/
- uint32_t did_max;
-};
-
-bool dal_divider_range_construct(
- struct divider_range *div_range,
- uint32_t range_start,
- uint32_t range_step,
- uint32_t did_min,
- uint32_t did_max);
-
-uint32_t dal_divider_range_get_divider(
- struct divider_range *div_range,
- uint32_t ranges_num,
- uint32_t did);
-uint32_t dal_divider_range_get_did(
- struct divider_range *div_range,
- uint32_t ranges_num,
- uint32_t divider);
-
-#endif /* __DAL_DIVIDER_RANGE_H__ */
void core_link_disable_stream(struct pipe_ctx *pipe_ctx);
/********** DAL Core*********************/
-#include "display_clock_interface.h"
+#include "display_clock.h"
#include "transform.h"
struct resource_pool;
/*
- * Copyright 2012-15 Advanced Micro Devices, Inc.
+ * Copyright 2012-16 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
*
*/
-#ifndef __DISPLAY_CLOCK_INTERFACE_H__
-#define __DISPLAY_CLOCK_INTERFACE_H__
+#ifndef __DISPLAY_CLOCK_H__
+#define __DISPLAY_CLOCK_H__
#include "dm_services_types.h"
-#include "hw_sequencer_types.h"
-#include "grph_object_defs.h"
-#include "signal_types.h"
/* Structure containing all state-dependent clocks
* (dependent on "enum clocks_state") */
struct state_dependent_clocks {
- uint32_t display_clk_khz;
- uint32_t pixel_clk_khz;
+ int display_clk_khz;
+ int pixel_clk_khz;
};
struct display_clock {
struct dc_context *ctx;
const struct display_clock_funcs *funcs;
- int min_display_clk_threshold_khz;
enum dm_pp_clocks_state max_clks_state;
enum dm_pp_clocks_state cur_min_clks_state;
};
struct display_clock_funcs {
- void (*destroy)(struct display_clock **to_destroy);
void (*set_clock)(struct display_clock *disp_clk,
- uint32_t requested_clock_khz);
+ int requested_clock_khz);
+
enum dm_pp_clocks_state (*get_required_clocks_state)(
struct display_clock *disp_clk,
struct state_dependent_clocks *req_clocks);
+
bool (*set_min_clocks_state)(struct display_clock *disp_clk,
enum dm_pp_clocks_state dm_pp_clocks_state);
- uint32_t (*get_dp_ref_clk_frequency)(struct display_clock *disp_clk);
-};
-
-void dal_display_clock_destroy(struct display_clock **to_destroy);
+ int (*get_dp_ref_clk_frequency)(struct display_clock *disp_clk);
+};
-#endif /* __DISPLAY_CLOCK_INTERFACE_H__ */
+#endif /* __DISPLAY_CLOCK_H__ */
projects / platform / kernel / linux-starfive.git / commitdiff