pinctrl: axp209: add support for AXP813 GPIOs

The AXP813 has only two GPIOs. GPIO0 can either be used as a GPIO, an
LDO regulator or an ADC. GPIO1 can be used either as a GPIO or an LDO
regulator.

Moreover, the status bit of the GPIOs when in input mode is not offset
by 4 unlike the AXP209.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
index 0d77597..fc42b2c 100644 (file)
--- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
@@ -9,7 +9,9 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 This driver employs the per-pin muxing pattern.
 
 Required properties:
-- compatible: Should be "x-powers,axp209-gpio"
+- compatible: Should be one of:
+       - "x-powers,axp209-gpio"
+       - "x-powers,axp813-gpio"
 - #gpio-cells: Should be two. The first cell is the pin number and the
   second is the GPIO flags.
 - gpio-controller: Marks the device node as a GPIO controller.
@@ -57,8 +59,17 @@ GPIOs and their functions
 Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does
 not force GPIO1 and GPIO2 to be in gpio_in function as well).
 
+axp209
+------
 GPIO   |       Functions
 ------------------------
 GPIO0  |       gpio_in, gpio_out, ldo, adc
 GPIO1  |       gpio_in, gpio_out, ldo, adc
 GPIO2  |       gpio_in, gpio_out
+
+axp813
+------
+GPIO   |       Functions
+------------------------
+GPIO0  |       gpio_in, gpio_out, ldo, adc
+GPIO1  |       gpio_in, gpio_out, ldo

diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c
index 9bb8722..22d3bb0 100644 (file)
--- a/drivers/pinctrl/pinctrl-axp209.c
+++ b/drivers/pinctrl/pinctrl-axp209.c
@@ -19,6 +19,7 @@
 #include <linux/mfd/axp20x.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
@@ -41,6 +42,8 @@
 #define AXP20X_MUX_GPIO_IN             BIT(1)
 #define AXP20X_MUX_ADC                 BIT(2)
 
+#define AXP813_MUX_ADC                 (BIT(2) | BIT(0))
+
 struct axp20x_pctrl_desc {
        const struct pinctrl_pin_desc   *pins;
        unsigned int                    npins;
@@ -74,6 +77,11 @@ static const struct pinctrl_pin_desc axp209_pins[] = {
        PINCTRL_PIN(2, "GPIO2"),
 };
 
+static const struct pinctrl_pin_desc axp813_pins[] = {
+       PINCTRL_PIN(0, "GPIO0"),
+       PINCTRL_PIN(1, "GPIO1"),
+};
+
 static const struct axp20x_pctrl_desc axp20x_data = {
        .pins   = axp209_pins,
        .npins  = ARRAY_SIZE(axp209_pins),
@@ -83,6 +91,15 @@ static const struct axp20x_pctrl_desc axp20x_data = {
        .adc_mux = AXP20X_MUX_ADC,
 };
 
+static const struct axp20x_pctrl_desc axp813_data = {
+       .pins   = axp813_pins,
+       .npins  = ARRAY_SIZE(axp813_pins),
+       .ldo_mask = BIT(0) | BIT(1),
+       .adc_mask = BIT(0),
+       .gpio_status_offset = 0,
+       .adc_mux = AXP813_MUX_ADC,
+};
+
 static int axp20x_gpio_get_reg(unsigned int offset)
 {
        switch (offset) {
@@ -357,10 +374,18 @@ static void axp20x_build_funcs_groups(struct platform_device *pdev)
                                      pctl->desc->pins);
 }
 
+static const struct of_device_id axp20x_pctl_match[] = {
+       { .compatible = "x-powers,axp209-gpio", .data = &axp20x_data, },
+       { .compatible = "x-powers,axp813-gpio", .data = &axp813_data, },
+       { }
+};
+MODULE_DEVICE_TABLE(of, axp20x_pctl_match);
+
 static int axp20x_pctl_probe(struct platform_device *pdev)
 {
        struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
        struct axp20x_pctl *pctl;
+       struct device *dev = &pdev->dev;
        struct pinctrl_desc *pctrl_desc;
        int ret;
 
@@ -388,9 +413,9 @@ static int axp20x_pctl_probe(struct platform_device *pdev)
        pctl->chip.set                  = axp20x_gpio_set;
        pctl->chip.direction_input      = axp20x_gpio_input;
        pctl->chip.direction_output     = axp20x_gpio_output;
-       pctl->chip.ngpio                = 3;
+       pctl->chip.ngpio                = pctl->desc->npins;
 
-       pctl->desc = &axp20x_data;
+       pctl->desc = (struct axp20x_pctrl_desc *)of_device_get_match_data(dev);
        pctl->regmap = axp20x->regmap;
        pctl->dev = &pdev->dev;
 
@@ -435,12 +460,6 @@ static int axp20x_pctl_probe(struct platform_device *pdev)
        return 0;
 }
 
-static const struct of_device_id axp20x_pctl_match[] = {
-       { .compatible = "x-powers,axp209-gpio" },
-       { }
-};
-MODULE_DEVICE_TABLE(of, axp20x_pctl_match);
-
 static struct platform_driver axp20x_pctl_driver = {
        .probe          = axp20x_pctl_probe,
        .driver = {