Drop support for CONFIG_SKIP_RELOCATE_UBOOT

For ARM systems, before ELF relocation was introduced,
CONFIG_SKIP_RELOCATE_UBOOT coul be used to prevent *COPYING* the
U-Boot image from whereever it was loaded to it's link address
(CONFIG_SYS_TEXT_BASE).  The name was badly chosen, as no relocation
was performed at all, it was just a memcpy().

With ELF relocation, this does not work like that any more, and
related boards need to be fixed anyway.  So don't keep this relict any
longer.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>

diff --git a/Makefile b/Makefile
index b187611..ae36ea5 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1067,7 +1067,6 @@ mx31pdk_nand_config       : unconfig
                echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
        else                                                                            \
                echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
-               echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
        fi
        @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
 

diff --git a/README b/README
index f559811..1acf9a3 100644 (file)
--- a/README
+++ b/README
@@ -2836,19 +2836,17 @@ Low Level (hardware related) configuration options:
                globally (CONFIG_CMD_MEM).
 
 - CONFIG_SKIP_LOWLEVEL_INIT
-- CONFIG_SKIP_RELOCATE_UBOOT
+                [ARM only] If this variable is defined, then certain
+                low level initializations (like setting up the memory
+                controller) are omitted and/or U-Boot does not
+                relocate itself into RAM.
 
-               [ARM only] If these variables are defined, then
-               certain low level initializations (like setting up
-               the memory controller) are omitted and/or U-Boot does
-               not relocate itself into RAM.
-               Normally these variables MUST NOT be defined. The
-               only exception is when U-Boot is loaded (to RAM) by
-               some other boot loader or by a debugger which
-               performs these initializations itself.
+                Normally this variable MUST NOT be defined. The only
+                exception is when U-Boot is loaded (to RAM) by some
+                other boot loader or by a debugger which performs
+                these initializations itself.
 
 - CONFIG_PRELOADER
-
                Modifies the behaviour of start.S when compiling a loader
                that is executed before the actual U-Boot. E.g. when
                compiling a NAND SPL.

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 9f172b6..aecc943 100644 (file)
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -215,7 +215,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -262,7 +261,6 @@ fixnext:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -295,9 +293,7 @@ jump_2_ram:
        ldr     r0, _board_init_r_ofs
        adr     r1, _start
        add     lr, r0, r1
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        add     lr, lr, r9
-#endif
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
        mov     r1, r7          /* dest_addr */

diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 1a2e5aa..f04d268 100644 (file)
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -281,7 +281,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -328,7 +327,6 @@ fixnext:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 #ifdef CONFIG_ENABLE_MMU
 enable_mmu:
@@ -399,9 +397,7 @@ _nand_boot: .word nand_boot
        ldr     r0, _board_init_r_ofs
        adr     r1, _start
        add     lr, r0, r1
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        add     lr, lr, r9
-#endif
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
        mov     r1, r7          /* dest_addr */

diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index b94ecb4..8cd267b 100644 (file)
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -190,7 +190,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -217,7 +216,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 08d4e7b..d4edde7 100644 (file)
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -236,7 +236,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -263,7 +262,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index 6792a22..51229c6 100644 (file)
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -227,7 +227,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -254,7 +253,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 4f689c1..6dcc9b4 100644 (file)
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -204,7 +204,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -251,7 +250,6 @@ fixnext:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -286,9 +284,7 @@ _nand_boot_ofs:
        ldr     r0, _board_init_r_ofs
        adr     r1, _start
        add     lr, r0, r1
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        add     lr, lr, r9
-#endif
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
        mov     r1, r7          /* dest_addr */

diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 7378edc..cad43ba 100644 (file)
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -196,7 +196,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -223,7 +222,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 2240f3a..957ca34 100644 (file)
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -194,7 +194,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -221,7 +220,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 4a0710c..bb3948d 100644 (file)
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -189,7 +189,6 @@ relocate_code:
 stack_setup:
        mov     sp, r4
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        adr     r0, _start
        ldr     r2, _TEXT_BASE
        ldr     r3, _bss_start_ofs
@@ -259,7 +258,6 @@ clbss_l:str r2, [r0]                /* clear loop...                    */
        cmp     r0, r1
        bne     clbss_l
 #endif /* #ifndef CONFIG_PRELOADER */
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -269,9 +267,7 @@ jump_2_ram:
        ldr     r0, _board_init_r_ofs
        adr     r1, _start
        add     lr, r0, r1
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        add     lr, lr, r9
-#endif
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
        mov     r1, r7          /* dest_addr */

diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 0269207..8d1aebc 100644 (file)
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -320,7 +320,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -347,7 +346,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index 080d29d..fd8a40b 100644 (file)
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -207,7 +207,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -234,7 +233,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 03cf4de..a136ed8 100644 (file)
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -251,7 +251,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        stmfd sp!, {r0-r12}
 copy_loop:
        ldmia   r0!, {r3-r5, r7-r11}    /* copy from source address [r0]    */
@@ -300,7 +299,6 @@ fixnext:
        cmp     r2, r3
        blo     fixloop
 #endif /* #ifndef CONFIG_PRELOADER */
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER
@@ -332,9 +330,7 @@ _start_oneboot_ofs
        ldr     r0, _board_init_r_ofs
        adr     r1, _start
        add     lr, r0, r1
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
        add     lr, lr, r9
-#endif
        /* setup parameters for board_init_r */
        mov     r0, r5          /* gd_t */
        mov     r1, r7          /* dest_addr */

diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index ca95dea..67b2c6a 100644 (file)
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -179,7 +179,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -218,7 +217,6 @@ vector_copy_loop:
        stmia   r1!, {r3-r10}
        cmp     r0, r2
        blo     vector_copy_loop
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index ab6e2f2..ace0c07 100644 (file)
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -183,7 +183,6 @@ stack_setup:
        cmp     r0, r6
        beq     clear_bss
 
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
 copy_loop:
        ldmia   r0!, {r9-r10}           /* copy from source address [r0]    */
        stmia   r6!, {r9-r10}           /* copy to   target address [r1]    */
@@ -210,7 +209,6 @@ fixloop:
        cmp     r2, r3
        blo     fixloop
 #endif
-#endif /* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
 #ifndef CONFIG_PRELOADER

diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index 6d8780a..4a8acab 100644 (file)
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -31,7 +31,6 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * High Level Configuration Options

diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 9cd0bc6..36a2a46 100644 (file)
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -42,7 +42,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index cde5aed..49c923f 100644 (file)
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -44,7 +44,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index fb9d0a5..15de310 100644 (file)
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -69,8 +69,6 @@
 #define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#else
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 /*
  * Size of malloc() pool

diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 02401b8..5e7dee5 100644 (file)
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -49,7 +49,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 05e12dd..401478b 100644 (file)
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -47,7 +47,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 0905638..f6cb406 100644 (file)
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -43,7 +43,6 @@
 
 #ifndef CONFIG_SYS_USE_BOOT_NORFLASH
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 
 /*

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 67288d0..de74dcf 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -47,7 +47,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 22054cf..8dbd082 100644 (file)
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -44,7 +44,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index ff4f306..a197635 100644 (file)
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -68,8 +68,6 @@
 #define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#else
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*

diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index a523189..23bfbeb 100644 (file)
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -29,7 +29,6 @@
 #define        CONFIG_VPAC270          1       /* Toradex Colibri PXA270 board */
 
 #undef BOARD_LATE_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #undef CONFIG_USE_IRQ
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 

diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index 5f40908..f31081d 100644 (file)
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -28,7 +28,6 @@
 
 #ifdef CONFIG_CPUAT91_RAM
 #define CONFIG_SKIP_LOWLEVEL_INIT      1
-#define CONFIG_SKIP_RELOCATE_UBOOT     1
 #else
 #define CONFIG_BOOTDELAY               1
 #endif

diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index f92f3c7..7a85d65 100644 (file)
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -69,8 +69,6 @@
 #define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#else
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 /*
  * Size of malloc() pool

diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 906b8e7..1feada9 100644 (file)
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -41,7 +41,6 @@
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ                  1000
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_TEXT_BASE           0xc1080000
 
 /*

diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h
index d4c3697..8a69052 100644 (file)
--- a/include/configs/davinci_dm355evm.h
+++ b/include/configs/davinci_dm355evm.h
@@ -24,7 +24,6 @@
 #define DAVINCI_DM355EVM
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 3rd stage loader */
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_SYS_NO_FLASH            /* that is, no *NOR* flash */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_DISPLAY_CPUINFO

diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h
index 4b1f029..c953032 100644 (file)
--- a/include/configs/davinci_dm355leopard.h
+++ b/include/configs/davinci_dm355leopard.h
@@ -23,7 +23,6 @@
 #define DAVINCI_DM355LEOPARD
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 3rd stage loader */
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_SYS_NO_FLASH            /* that is, no *NOR* flash */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_DISPLAY_CPUINFO

diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 04b6044..b78fe83 100644 (file)
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -24,7 +24,6 @@
 #define DAVINCI_DM365EVM
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 3rd stage loader */
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_SYS_NO_FLASH            /* that is, no *NOR* flash */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 

diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index 6b5d865..f0a8e98 100644 (file)
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -24,7 +24,6 @@
 #define DAVINCI_DM6467EVM
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /* SoC Configuration */
 #define CONFIG_ARM926EJS                               /* arm926ejs CPU */

diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index ec05aba..186726d 100644 (file)
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -133,7 +133,6 @@
 #define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #endif
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_HW_ECC
@@ -143,10 +142,8 @@
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #else
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CONFIG_ENV_IS_IN_FLASH
 #undef CONFIG_SYS_NO_FLASH

diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index 409c5a4..967ebcc 100644 (file)
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -88,7 +88,6 @@
 #define CONFIG_ENV_SECT_SIZE   2048    /* Env sector Size */
 #define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */

diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
index c7e0e56..4d866d0 100644 (file)
--- a/include/configs/davinci_sffsdr.h
+++ b/include/configs/davinci_sffsdr.h
@@ -83,7 +83,6 @@
 #define CONFIG_ENV_SECT_SIZE   2048    /* Env sector Size */
 #define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */

diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
index 3035f79..0dc89ef 100644 (file)
--- a/include/configs/davinci_sonata.h
+++ b/include/configs/davinci_sonata.h
@@ -122,7 +122,6 @@
 #define CONFIG_ENV_SECT_SIZE   512     /* Env sector Size */
 #define CONFIG_ENV_SIZE                (16 << 10)      /* 16 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
@@ -131,10 +130,8 @@
 #elif defined(CONFIG_SYS_USE_NOR)
 #ifdef CONFIG_NOR_UART_BOOT
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #else
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 #define CONFIG_ENV_IS_IN_FLASH
 #undef CONFIG_SYS_NO_FLASH

diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index 5c05e4d..69c6420 100644 (file)
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -32,7 +32,6 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #define CONFIG_SKIP_LOWLEVEL_INIT      1
-#undef  CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * High Level Configuration Options

diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index 82e70f7..fd39ab4 100644 (file)
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -39,7 +39,6 @@
  * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem.
  */
 #undef  CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT     1
 
 /*
  * High Level Configuration Options

diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
index a2edaf9..cfb7cea 100644 (file)
--- a/include/configs/kb9202.h
+++ b/include/configs/kb9202.h
@@ -53,8 +53,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define        CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* undef this for direct boot from */
-                                                                       /* NOR flash without preloader */
 
 #define        CONFIG_SYS_LONGHELP
 

diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index a0fe32e..17972d7 100644 (file)
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -31,7 +31,6 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * High Level Configuration Options

diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 41a953e..a27b36b 100644 (file)
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -48,7 +48,6 @@
 #undef CONFIG_USE_IRQ                          /* don't need IRQ/FIQ stuff */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_MISC_INIT_R                     /* Call misc_init_r */
 
 #define CONFIG_ARCH_CPU_INIT

diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 956603a..8e398d7 100644 (file)
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -73,8 +73,6 @@
 #define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
 #define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#else
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 47e7c86..3b90a01 100644 (file)
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -47,7 +47,6 @@
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #endif
 
 /*

diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index f31fc4e..b6868b2 100644 (file)
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -28,7 +28,6 @@
  /* High Level Configuration Options */
 
 #define CONFIG_MX51    /* in a mx51 */
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 #define CONFIG_SYS_MX5_HCLK    24000000
 #define CONFIG_SYS_MX5_CLK32           32768

diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index ee5a995..f159013 100644 (file)
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -119,9 +119,6 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
-/*#define CONFIG_SKIP_RELOCATE_UBOOT*/
-/*#define CONFIG_SKIP_LOWLEVEL_INIT */
-
 /*
  * Partitions (mtdparts command line support)
  */

diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index af0202c..ca3bf26 100644 (file)
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -48,7 +48,6 @@
 #undef CONFIG_USE_IRQ                          /* don't need IRQ/FIQ stuff */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_MISC_INIT_R             1       /* Call misc_init_r */
 
 #define CONFIG_ARCH_CPU_INIT

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index aee842f..7fcc9ba 100644 (file)
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -152,7 +152,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 42ec855..619af2d 100644 (file)
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -161,7 +161,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #define CONFIG_USER_LOWLEVEL_INIT      1
 
 /*

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 2fbe5c6..3ed6b56 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -47,7 +47,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 1ff35e3..c1c7f80 100644 (file)
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -42,7 +42,6 @@
  * so we MUST NOT initialize critical regs like mem-timing ...
  */
 #undef CONFIG_SKIP_LOWLEVEL_INIT                       /* define for developing */
-#undef CONFIG_SKIP_RELOCATE_UBOOT                      /* define for developing */
 #define        CONFIG_SYS_TEXT_BASE    0x0
 
 /*

diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 47b8a55..541aec0 100644 (file)
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -40,8 +40,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /* input clock of PLL: has 24MHz input clock at S5PC110 */
 #define CONFIG_SYS_CLK_FREQ_C110       24000000
 

diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index cdbe710..00f4dc9 100644 (file)
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -54,7 +54,6 @@
 #define CONFIG_INITRD_TAG              1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index e02d5e7..c0e6643 100644 (file)
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -34,7 +34,6 @@
  */
 #define CONFIG_INFERNO                 /* we are using the inferno bootldr */
 #define CONFIG_SKIP_LOWLEVEL_INIT      1
-#undef  CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * High Level Configuration Options

diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index f89fc3e..671f2c7 100644 (file)
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -40,8 +40,6 @@
 #define CONFIG_S3C64XX         1       /* in a SAMSUNG S3C64XX Family  */
 #define CONFIG_SMDK6400                1       /* on a SAMSUNG SMDK6400 Board  */
 
-#define CONFIG_SKIP_RELOCATE_UBOOT
-
 #define CONFIG_PERIPORT_REMAP
 #define CONFIG_PERIPORT_BASE   0x70000000
 #define CONFIG_PERIPORT_SIZE   0x13

diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 6bea5b2..e36b262 100644 (file)
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -45,8 +45,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 /* input clock of PLL: SMDKC100 has 12MHz input clock */
 #define CONFIG_SYS_CLK_FREQ            12000000
 

diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 31a0bdf..7b18022 100644 (file)
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -63,7 +63,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SKIP_RELOCATE_UBOOT
 
 /*
  * Hardware drivers

diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 67dca27..a5c116b 100644 (file)
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -195,8 +195,6 @@
                                        GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
                                        CONFIG_SYS_GBL_DATA_OFFSET)
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /* 166 MHz DDR RAM */

diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index a8b88da..615d5c1 100644 (file)
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -30,7 +30,6 @@
 #define        CONFIG_SYS_TEXT_BASE    0x0
 
 #undef BOARD_LATE_INIT
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #undef CONFIG_USE_IRQ
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 

diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 4ecef94..1e03b01 100644 (file)
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -45,7 +45,6 @@
 #undef CONFIG_MMC
 #define BOARD_LATE_INIT                1
 
-#undef CONFIG_SKIP_RELOCATE_UBOOT
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
 
 /* we will never enable dcache, because we have to setup MMU first */