tegra: video: Clean up the old LCD/PWM driver code

Remove the old PWM code. Remove calls to CONFIG_LCD functions now that we
are using driver model for video.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

diff --git a/arch/arm/include/asm/arch-tegra/pwm.h b/arch/arm/include/asm/arch-tegra/pwm.h
index eb2e465..5a2d9f3 100644 (file)
--- a/arch/arm/include/asm/arch-tegra/pwm.h
+++ b/arch/arm/include/asm/arch-tegra/pwm.h
@@ -27,36 +27,4 @@ struct pwm_ctlr {
 #define PWM_DIVIDER_SHIFT      0
 #define PWM_DIVIDER_MASK       (0x1FFF << PWM_DIVIDER_SHIFT)
 
-#ifndef CONFIG_PWM
-/**
- * Program the PWM with the given parameters.
- *
- * @param channel      PWM channel to update
- * @param rate         Clock rate to use for PWM, or 0 to leave alone
- * @param pulse_width  high pulse width: 0=always low, 1=1/256 pulse high,
- *                     n = n/256 pulse high
- * @param freq_divider frequency divider value (1 to use rate as is)
- */
-void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider);
-
-/**
- * Request a pwm channel as referenced by a device tree node.
- *
- * This channel can then be passed to pwm_enable().
- *
- * @param blob         Device tree blob
- * @param node         Node containing reference to pwm
- * @param prop_name    Property name of pwm reference
- * @return channel number, if ok, else -1
- */
-int pwm_request(const void *blob, int node, const char *prop_name);
-
-/**
- * Set up the pwm controller, by looking it up in the fdt.
- *
- * @return 0 if ok, -1 if the device tree node was not found or invalid.
- */
-int pwm_init(const void *blob);
-#endif
-
 #endif /* __ASM_ARCH_TEGRA_PWM_H */

diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 2be6ef4..b2dbc69 100644 (file)
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -12,7 +12,6 @@ obj-y += spl.o
 obj-y += cpu.o
 else
 obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
-obj-$(CONFIG_PWM_TEGRA) += pwm.o
 endif
 
 obj-$(CONFIG_ARM64) += arm64-mmu.o

diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index c03f3e2..ac274e1 100644 (file)
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -13,15 +13,9 @@
 #include <linux/sizes.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
-#ifdef CONFIG_LCD
-#include <asm/arch/display.h>
-#endif
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/pmu.h>
-#ifdef CONFIG_PWM_TEGRA
-#include <asm/arch/pwm.h>
-#endif
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/ap.h>
 #include <asm/arch-tegra/board.h>
@@ -135,16 +129,9 @@ int board_init(void)
 #endif
 
        /* Init is handled automatically in the driver-model case */
-#if defined(CONFIG_PWM_TEGRA) && !defined(CONFIG_PWM)
-       if (pwm_init(gd->fdt_blob))
-               debug("%s: Failed to init pwm\n", __func__);
-#endif
-#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO)
+#if defined(CONFIG_DM_VIDEO)
        pin_mux_display();
 #endif
-#ifdef CONFIG_LCD
-       tegra_lcd_check_next_stage(gd->fdt_blob, 0);
-#endif
        /* boot param addr */
        gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
 
@@ -171,15 +158,12 @@ int board_init(void)
        pin_mux_usb();
 #endif
 
-#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO)
+#if defined(CONFIG_DM_VIDEO)
        board_id = tegra_board_id();
        err = tegra_lcd_pmic_init(board_id);
        if (err)
                return err;
 #endif
-#ifdef CONFIG_LCD
-       tegra_lcd_check_next_stage(gd->fdt_blob, 0);
-#endif
 
 #ifdef CONFIG_TEGRA_NAND
        pin_mux_nand();
@@ -226,9 +210,6 @@ int board_early_init_f(void)
        /* Initialize periph GPIOs */
        gpio_early_init();
        gpio_early_init_uart();
-#ifdef CONFIG_LCD
-       tegra_lcd_early_init(gd->fdt_blob);
-#endif
 
        return 0;
 }
@@ -236,10 +217,6 @@ int board_early_init_f(void)
 
 int board_late_init(void)
 {
-#ifdef CONFIG_LCD
-       /* Make sure we finish initing the LCD */
-       tegra_lcd_check_next_stage(gd->fdt_blob, 1);
-#endif
 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
        if (tegra_cpu_is_non_secure()) {
                printf("CPU is in NS mode\n");

diff --git a/arch/arm/mach-tegra/pwm.c b/arch/arm/mach-tegra/pwm.c
deleted file mode 100644 (file)
index 1c38fc1..0000000
--- a/arch/arm/mach-tegra/pwm.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Tegra pulse width frequency modulator definitions
- *
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/pwm.h>
-
-struct pwm_info {
-       struct pwm_ctlr *pwm;           /* Registers for our pwm controller */
-       int pwm_node;                   /* PWM device tree node */
-} local;
-
-void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider)
-{
-       u32 reg;
-
-       assert(channel < PWM_NUM_CHANNELS);
-
-       /* TODO: Can we use clock_adjust_periph_pll_div() here? */
-       if (rate) {
-               clock_start_periph_pll(PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ,
-                                      rate);
-       }
-
-       reg = PWM_ENABLE_MASK;
-       reg |= pulse_width << PWM_WIDTH_SHIFT;
-       reg |= freq_divider << PWM_DIVIDER_SHIFT;
-       writel(reg, &local.pwm[channel].control);
-       debug("%s: channel=%d, rate=%d\n", __func__, channel, rate);
-}
-
-int pwm_request(const void *blob, int node, const char *prop_name)
-{
-       int pwm_node;
-       u32 data[3];
-
-       if (fdtdec_get_int_array(blob, node, prop_name, data,
-                       ARRAY_SIZE(data))) {
-               debug("%s: Cannot decode PWM property '%s'\n", __func__,
-                     prop_name);
-               return -1;
-       }
-
-       pwm_node = fdt_node_offset_by_phandle(blob, data[0]);
-       if (pwm_node != local.pwm_node) {
-               debug("%s: PWM property '%s' phandle %d not recognised"
-                     "- expecting %d\n", __func__, prop_name, data[0],
-                     local.pwm_node);
-               return -1;
-       }
-       if (data[1] >= PWM_NUM_CHANNELS) {
-               debug("%s: PWM property '%s': invalid channel %u\n", __func__,
-                     prop_name, data[1]);
-               return -1;
-       }
-
-       /*
-        * TODO: We could maintain a list of requests, but it might not be
-        * worth it for U-Boot.
-        */
-       return data[1];
-}
-
-int pwm_init(const void *blob)
-{
-       local.pwm_node = fdtdec_next_compatible(blob, 0,
-                                               COMPAT_NVIDIA_TEGRA20_PWM);
-       if (local.pwm_node < 0) {
-               debug("%s: Cannot find device tree node\n", __func__);
-               return -1;
-       }
-
-       local.pwm = (struct pwm_ctlr *)fdtdec_get_addr(blob, local.pwm_node,
-                                                      "reg");
-       if (local.pwm == (struct pwm_ctlr *)FDT_ADDR_T_NONE) {
-               debug("%s: Cannot find pwm reg address\n", __func__);
-               return -1;
-       }
-       debug("Tegra PWM at %p, node %d\n", local.pwm, local.pwm_node);
-
-       return 0;
-}