this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
+config USB_STORAGE_KARMA
+ bool "Support for Rio Karma music player"
+ depends on USB_STORAGE
+ help
+ Say Y here to include additional code to support the Rio Karma
+ USB interface.
+
+ This code places the Rio Karma into mass storage mode, enabling
+ it to be mounted as an ordinary filesystem. Performing an eject
+ on the resulting scsi device node returns the Karma to normal
+ operation.
+
config USB_LIBUSUAL
bool "The shared table of common (or usual) storage devices"
depends on USB
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
#include "debug.h"
#include "transport.h"
-#define RIO_MSC 0x08
-#define RIOP_INIT "RIOP\x00\x01\x08"
-#define RIOP_INIT_LEN 7
-#define RIO_SEND_LEN 40
-#define RIO_RECV_LEN 0x200
-
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
return (res ? -1 : 0);
}
-
-/* Place the Rio Karma into mass storage mode.
- *
- * The initialization begins by sending 40 bytes starting
- * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
- * packet with the high four bits set and everything else null.
- *
- * Next, we send RIOP\x80\x00\x08\x00. Each time, a 512 byte response
- * must be read, but we must loop until byte 5 in the response is 0x08,
- * indicating success. */
-int rio_karma_init(struct us_data *us)
-{
- int result, partial;
- char *recv;
- unsigned long timeout;
-
- // us->iobuf is big enough to hold cmd but not receive
- if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
- goto die_nomem;
-
- US_DEBUGP("Initializing Karma...\n");
-
- memset(us->iobuf, 0, RIO_SEND_LEN);
- memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
- us->iobuf, RIO_SEND_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
- recv, RIO_RECV_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- us->iobuf[4] = 0x80;
- us->iobuf[5] = 0;
- timeout = jiffies + msecs_to_jiffies(3000);
- for (;;) {
- US_DEBUGP("Sending init command\n");
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
- us->iobuf, RIO_SEND_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
- recv, RIO_RECV_LEN, &partial);
- if (result != USB_STOR_XFER_GOOD)
- goto die;
-
- if (recv[5] == RIO_MSC)
- break;
- if (time_after(jiffies, timeout))
- goto die;
- msleep(10);
- }
- US_DEBUGP("Karma initialized.\n");
- kfree(recv);
- return 0;
-
-die:
- kfree(recv);
-die_nomem:
- US_DEBUGP("Could not initialize karma.\n");
- return USB_STOR_TRANSPORT_FAILED;
-}
-
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-int rio_karma_init(struct us_data *us);
--- /dev/null
+/* Driver for Rio Karma
+ *
+ * (c) 2006 Bob Copeland <me@bobcopeland.com>
+ * (c) 2006 Keith Bennett <keith@mcs.st-and.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "debug.h"
+#include "karma.h"
+
+#define RIO_PREFIX "RIOP\x00"
+#define RIO_PREFIX_LEN 5
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
+#define RIO_ENTER_STORAGE 0x1
+#define RIO_LEAVE_STORAGE 0x2
+#define RIO_RESET 0xC
+
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
+
+struct karma_data {
+ int in_storage;
+ char *recv;
+};
+
+/*
+ * Send commands to Rio Karma.
+ *
+ * For each command we send 40 bytes starting 'RIOP\0' followed by
+ * the command number and a sequence number, which the device will ack
+ * with a 512-byte packet with the high four bits set and everything
+ * else null. Then we send 'RIOP\x80' followed by a zero and the
+ * sequence number, until byte 5 in the response repeats the sequence
+ * number.
+ */
+static int rio_karma_send_command(char cmd, struct us_data *us)
+{
+ int result, partial;
+ unsigned long timeout;
+ static unsigned char seq = 1;
+ struct karma_data *data = (struct karma_data *) us->extra;
+
+ US_DEBUGP("karma: sending command %04x\n", cmd);
+ memset(us->iobuf, 0, RIO_SEND_LEN);
+ memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN);
+ us->iobuf[5] = cmd;
+ us->iobuf[6] = seq;
+
+ timeout = jiffies + msecs_to_jiffies(6000);
+ for (;;) {
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ us->iobuf, RIO_SEND_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto err;
+
+ result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data->recv, RIO_RECV_LEN, &partial);
+ if (result != USB_STOR_XFER_GOOD)
+ goto err;
+
+ if (data->recv[5] == seq)
+ break;
+
+ if (time_after(jiffies, timeout))
+ goto err;
+
+ us->iobuf[4] = 0x80;
+ us->iobuf[5] = 0;
+ msleep(50);
+ }
+
+ seq++;
+ if (seq == 0)
+ seq = 1;
+
+ US_DEBUGP("karma: sent command %04x\n", cmd);
+ return 0;
+err:
+ US_DEBUGP("karma: command %04x failed\n", cmd);
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Trap START_STOP and READ_10 to leave/re-enter storage mode.
+ * Everything else is propagated to the normal bulk layer.
+ */
+int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int ret;
+ struct karma_data *data = (struct karma_data *) us->extra;
+
+ if (srb->cmnd[0] == READ_10 && !data->in_storage) {
+ ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+ if (ret)
+ return ret;
+
+ data->in_storage = 1;
+ return usb_stor_Bulk_transport(srb, us);
+ } else if (srb->cmnd[0] == START_STOP) {
+ ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us);
+ if (ret)
+ return ret;
+
+ data->in_storage = 0;
+ return rio_karma_send_command(RIO_RESET, us);
+ }
+ return usb_stor_Bulk_transport(srb, us);
+}
+
+static void rio_karma_destructor(void *extra)
+{
+ struct karma_data *data = (struct karma_data *) extra;
+ kfree(data->recv);
+}
+
+int rio_karma_init(struct us_data *us)
+{
+ int ret = 0;
+ struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
+ if (!data)
+ goto out;
+
+ data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO);
+ if (!data->recv) {
+ kfree(data);
+ goto out;
+ }
+
+ us->extra = data;
+ us->extra_destructor = rio_karma_destructor;
+ ret = rio_karma_send_command(RIO_ENTER_STORAGE, us);
+ data->in_storage = (ret == 0);
+out:
+ return ret;
+}
--- /dev/null
+#ifndef _KARMA_USB_H
+#define _KARMA_USB_H
+
+extern int rio_karma_init(struct us_data *us);
+extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+#endif
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio",
"Rio Karma",
- US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+ US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
#ifdef CONFIG_USB_STORAGE_ALAUDA
#include "alauda.h"
#endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+#include "karma.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
break;
#endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+ case US_PR_KARMA:
+ us->transport_name = "Rio Karma/Bulk";
+ us->transport = rio_karma_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ break;
+#endif
+
default:
return -EIO;
}
#ifdef CONFIG_USB_STORAGE_ALAUDA
#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
#endif
+#ifdef CONFIG_USB_STORAGE_KARMA
+#define US_PR_KARMA 0xf5 /* Rio Karma */
+#endif
#define US_PR_DEVICE 0xff /* Use device's value */