arch: arm64: dts: lx2160a-clearfog-itx: rename the sfp GPIO properties

Rename the 'mod-def0-gpio' property to 'mod-def0-gpios' so that we use
the preferred -gpios suffix. Also, with this change the dtb_check will
not complain when trying to verify the DTS against the sff,sfp.yaml
binding.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index 41702e7..a7dcbec 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -34,28 +34,28 @@
        sfp0: sfp-0 {
                compatible = "sff,sfp";
                i2c-bus = <&sfp0_i2c>;
-               mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+               mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
                maximum-power-milliwatt = <2000>;
        };
 
        sfp1: sfp-1 {
                compatible = "sff,sfp";
                i2c-bus = <&sfp1_i2c>;
-               mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>;
+               mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
                maximum-power-milliwatt = <2000>;
        };
 
        sfp2: sfp-2 {
                compatible = "sff,sfp";
                i2c-bus = <&sfp2_i2c>;
-               mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
+               mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
                maximum-power-milliwatt = <2000>;
        };
 
        sfp3: sfp-3 {
                compatible = "sff,sfp";
                i2c-bus = <&sfp3_i2c>;
-               mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+               mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
                maximum-power-milliwatt = <2000>;
        };
 };