regulator: act8865: Add act8600 support

This patch adds act8600 support to the act8865 driver.

VBUS and USB charger supported by this chip can be added later

Tested on MIPS Creator CI20

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index dad6358..e170df2 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -2,7 +2,7 @@ ACT88xx regulators
 -------------------
 
 Required properties:
-- compatible: "active-semi,act8846" or "active-semi,act8865"
+- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
 - reg: I2C slave address
 
 Optional properties:
@@ -16,6 +16,9 @@ The valid names for regulators are:
        REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
        - for act8865:
        DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
+       - for act8600:
+       DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
+       LDO_REG8, LDO_REG9, LDO_REG10,
 
 Example:
 --------

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 9eec453..3781f6e 100644 (file)
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -29,6 +29,35 @@
 #include <linux/regmap.h>
 
 /*
+ * ACT8600 Global Register Map.
+ */
+#define ACT8600_SYS_MODE       0x00
+#define ACT8600_SYS_CTRL       0x01
+#define ACT8600_DCDC1_VSET     0x10
+#define ACT8600_DCDC1_CTRL     0x12
+#define ACT8600_DCDC2_VSET     0x20
+#define ACT8600_DCDC2_CTRL     0x22
+#define ACT8600_DCDC3_VSET     0x30
+#define ACT8600_DCDC3_CTRL     0x32
+#define ACT8600_SUDCDC4_VSET   0x40
+#define ACT8600_SUDCDC4_CTRL   0x41
+#define ACT8600_LDO5_VSET      0x50
+#define ACT8600_LDO5_CTRL      0x51
+#define ACT8600_LDO6_VSET      0x60
+#define ACT8600_LDO6_CTRL      0x61
+#define ACT8600_LDO7_VSET      0x70
+#define ACT8600_LDO7_CTRL      0x71
+#define ACT8600_LDO8_VSET      0x80
+#define ACT8600_LDO8_CTRL      0x81
+#define ACT8600_LDO910_CTRL    0x91
+#define ACT8600_APCH0          0xA1
+#define ACT8600_APCH1          0xA8
+#define ACT8600_APCH2          0xA9
+#define ACT8600_APCH_STAT      0xAA
+#define ACT8600_OTG0           0xB0
+#define ACT8600_OTG1           0xB2
+
+/*
  * ACT8846 Global Register Map.
  */
 #define        ACT8846_SYS0            0x00
@@ -94,10 +123,15 @@
 #define        ACT8865_ENA             0x80    /* ON - [7] */
 #define        ACT8865_VSEL_MASK       0x3F    /* VSET - [5:0] */
 
+
+#define ACT8600_LDO10_ENA              0x40    /* ON - [6] */
+#define ACT8600_SUDCDC_VSEL_MASK       0xFF    /* SUDCDC VSET - [7:0] */
+
 /*
  * ACT8865 voltage number
  */
 #define        ACT8865_VOLTAGE_NUM     64
+#define ACT8600_SUDCDC_VOLTAGE_NUM     255
 
 struct act8865 {
        struct regmap *regmap;
@@ -116,6 +150,13 @@ static const struct regulator_linear_range act8865_voltage_ranges[] = {
        REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
 };
 
+static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
+       REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
+       REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
+       REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
+       REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
+};
+
 static struct regulator_ops act8865_ops = {
        .list_voltage           = regulator_list_voltage_linear_range,
        .map_voltage            = regulator_map_voltage_linear_range,
@@ -126,6 +167,12 @@ static struct regulator_ops act8865_ops = {
        .is_enabled             = regulator_is_enabled_regmap,
 };
 
+static struct regulator_ops act8865_ldo_ops = {
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+};
+
 #define ACT88xx_REG(_name, _family, _id, _vsel_reg)                    \
        [_family##_ID_##_id] = {                                        \
                .name                   = _name,                        \
@@ -142,6 +189,52 @@ static struct regulator_ops act8865_ops = {
                .owner                  = THIS_MODULE,                  \
        }
 
+static const struct regulator_desc act8600_regulators[] = {
+       ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET),
+       ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET),
+       ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET),
+       {
+               .name = "SUDCDC_REG4",
+               .id = ACT8600_ID_SUDCDC4,
+               .ops = &act8865_ops,
+               .type = REGULATOR_VOLTAGE,
+               .n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM,
+               .linear_ranges = act8600_sudcdc_voltage_ranges,
+               .n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges),
+               .vsel_reg = ACT8600_SUDCDC4_VSET,
+               .vsel_mask = ACT8600_SUDCDC_VSEL_MASK,
+               .enable_reg = ACT8600_SUDCDC4_CTRL,
+               .enable_mask = ACT8865_ENA,
+               .owner = THIS_MODULE,
+       },
+       ACT88xx_REG("LDO5", ACT8600, LDO5, VSET),
+       ACT88xx_REG("LDO6", ACT8600, LDO6, VSET),
+       ACT88xx_REG("LDO7", ACT8600, LDO7, VSET),
+       ACT88xx_REG("LDO8", ACT8600, LDO8, VSET),
+       {
+               .name = "LDO_REG9",
+               .id = ACT8600_ID_LDO9,
+               .ops = &act8865_ldo_ops,
+               .type = REGULATOR_VOLTAGE,
+               .n_voltages = 1,
+               .fixed_uV = 1800000,
+               .enable_reg = ACT8600_LDO910_CTRL,
+               .enable_mask = ACT8865_ENA,
+               .owner = THIS_MODULE,
+       },
+       {
+               .name = "LDO_REG10",
+               .id = ACT8600_ID_LDO10,
+               .ops = &act8865_ldo_ops,
+               .type = REGULATOR_VOLTAGE,
+               .n_voltages = 1,
+               .fixed_uV = 1200000,
+               .enable_reg = ACT8600_LDO910_CTRL,
+               .enable_mask = ACT8600_LDO10_ENA,
+               .owner = THIS_MODULE,
+       },
+};
+
 static const struct regulator_desc act8846_regulators[] = {
        ACT88xx_REG("REG1", ACT8846, REG1, VSET),
        ACT88xx_REG("REG2", ACT8846, REG2, VSET0),
@@ -169,6 +262,7 @@ static const struct regulator_desc act8865_regulators[] = {
 
 #ifdef CONFIG_OF
 static const struct of_device_id act8865_dt_ids[] = {
+       { .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
        { .compatible = "active-semi,act8846", .data = (void *)ACT8846 },
        { .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
        { }
@@ -200,6 +294,19 @@ static struct of_regulator_match act8865_matches[] = {
        [ACT8865_ID_LDO4]       = { .name = "LDO_REG4"},
 };
 
+static struct of_regulator_match act8600_matches[] = {
+       [ACT8600_ID_DCDC1]      = { .name = "DCDC_REG1"},
+       [ACT8600_ID_DCDC2]      = { .name = "DCDC_REG2"},
+       [ACT8600_ID_DCDC3]      = { .name = "DCDC_REG3"},
+       [ACT8600_ID_SUDCDC4]    = { .name = "SUDCDC_REG4"},
+       [ACT8600_ID_LDO5]       = { .name = "LDO_REG5"},
+       [ACT8600_ID_LDO6]       = { .name = "LDO_REG6"},
+       [ACT8600_ID_LDO7]       = { .name = "LDO_REG7"},
+       [ACT8600_ID_LDO8]       = { .name = "LDO_REG8"},
+       [ACT8600_ID_LDO9]       = { .name = "LDO_REG9"},
+       [ACT8600_ID_LDO10]      = { .name = "LDO_REG10"},
+};
+
 static int act8865_pdata_from_dt(struct device *dev,
                                 struct device_node **of_node,
                                 struct act8865_platform_data *pdata,
@@ -217,6 +324,10 @@ static int act8865_pdata_from_dt(struct device *dev,
        }
 
        switch (type) {
+       case ACT8600:
+               matches = act8600_matches;
+               num_matches = ARRAY_SIZE(act8600_matches);
+               break;
        case ACT8846:
                matches = act8846_matches;
                num_matches = ARRAY_SIZE(act8846_matches);
@@ -317,6 +428,12 @@ static int act8865_pmic_probe(struct i2c_client *client,
        }
 
        switch (type) {
+       case ACT8600:
+               regulators = act8600_regulators;
+               num_regulators = ARRAY_SIZE(act8600_regulators);
+               off_reg = -1;
+               off_mask = -1;
+               break;
        case ACT8846:
                regulators = act8846_regulators;
                num_regulators = ARRAY_SIZE(act8846_regulators);
@@ -366,7 +483,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
        }
 
        if (of_device_is_system_power_controller(dev->of_node)) {
-               if (!pm_power_off) {
+               if (!pm_power_off && (off_reg > 0)) {
                        act8865_i2c_client = client;
                        act8865->off_reg = off_reg;
                        act8865->off_mask = off_mask;
@@ -402,6 +519,7 @@ static int act8865_pmic_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id act8865_ids[] = {
+       { .name = "act8600", .driver_data = ACT8600 },
        { .name = "act8846", .driver_data = ACT8846 },
        { .name = "act8865", .driver_data = ACT8865 },
        { },

diff --git a/include/linux/regulator/act8865.h b/include/linux/regulator/act8865.h
index b6c4909..15fa8f2 100644 (file)
--- a/include/linux/regulator/act8865.h
+++ b/include/linux/regulator/act8865.h
@@ -19,6 +19,19 @@
 #include <linux/regulator/machine.h>
 
 enum {
+       ACT8600_ID_DCDC1,
+       ACT8600_ID_DCDC2,
+       ACT8600_ID_DCDC3,
+       ACT8600_ID_SUDCDC4,
+       ACT8600_ID_LDO5,
+       ACT8600_ID_LDO6,
+       ACT8600_ID_LDO7,
+       ACT8600_ID_LDO8,
+       ACT8600_ID_LDO9,
+       ACT8600_ID_LDO10,
+};
+
+enum {
        ACT8865_ID_DCDC1,
        ACT8865_ID_DCDC2,
        ACT8865_ID_DCDC3,
@@ -46,6 +59,7 @@ enum {
 };
 
 enum {
+       ACT8600,
        ACT8865,
        ACT8846,
 };