/* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
temp = TRANS_DDI_FUNC_ENABLE;
- temp |= TRANS_DDI_SELECT_PORT(port);
+ if (INTEL_GEN(dev_priv) >= 12)
+ temp |= TGL_TRANS_DDI_SELECT_PORT(port);
+ else
+ temp |= TRANS_DDI_SELECT_PORT(port);
switch (crtc_state->pipe_bpp) {
case 18:
i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
u32 val = I915_READ(reg);
- val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
- val |= TRANS_DDI_PORT_NONE;
+ if (INTEL_GEN(dev_priv) >= 12) {
+ val &= ~(TRANS_DDI_FUNC_ENABLE | TGL_TRANS_DDI_PORT_MASK |
+ TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
+ } else {
+ val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK |
+ TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
+ }
I915_WRITE(reg, val);
if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
mst_pipe_mask = 0;
for_each_pipe(dev_priv, p) {
enum transcoder cpu_transcoder = (enum transcoder)p;
+ unsigned int port_mask, ddi_select;
+
+ if (INTEL_GEN(dev_priv) >= 12) {
+ port_mask = TGL_TRANS_DDI_PORT_MASK;
+ ddi_select = TGL_TRANS_DDI_SELECT_PORT(port);
+ } else {
+ port_mask = TRANS_DDI_PORT_MASK;
+ ddi_select = TRANS_DDI_SELECT_PORT(port);
+ }
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
- if ((tmp & TRANS_DDI_PORT_MASK) != TRANS_DDI_SELECT_PORT(port))
+ if ((tmp & port_mask) != ddi_select)
continue;
if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
enum port port = encoder->port;
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
- if (cpu_transcoder != TRANSCODER_EDP)
- I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
- TRANS_CLK_SEL_PORT(port));
+ if (cpu_transcoder != TRANSCODER_EDP) {
+ if (INTEL_GEN(dev_priv) >= 12)
+ I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+ TGL_TRANS_CLK_SEL_PORT(port));
+ else
+ I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+ TRANS_CLK_SEL_PORT(port));
+ }
}
void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state)
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
- if (cpu_transcoder != TRANSCODER_EDP)
- I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
- TRANS_CLK_SEL_DISABLED);
+ if (cpu_transcoder != TRANSCODER_EDP) {
+ if (INTEL_GEN(dev_priv) >= 12)
+ I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+ TGL_TRANS_CLK_SEL_DISABLED);
+ else
+ I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
+ TRANS_CLK_SEL_DISABLED);
+ }
}
static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv,
#define TRANS_DDI_FUNC_ENABLE (1 << 31)
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
-#define TRANS_DDI_PORT_MASK (7 << 28)
#define TRANS_DDI_PORT_SHIFT 28
-#define TRANS_DDI_SELECT_PORT(x) ((x) << 28)
-#define TRANS_DDI_PORT_NONE (0 << 28)
+#define TGL_TRANS_DDI_PORT_SHIFT 27
+#define TRANS_DDI_PORT_MASK (7 << TRANS_DDI_PORT_SHIFT)
+#define TGL_TRANS_DDI_PORT_MASK (0xf << TGL_TRANS_DDI_PORT_SHIFT)
+#define TRANS_DDI_SELECT_PORT(x) ((x) << TRANS_DDI_PORT_SHIFT)
+#define TGL_TRANS_DDI_SELECT_PORT(x) (((x) + 1) << TGL_TRANS_DDI_PORT_SHIFT)
#define TRANS_DDI_MODE_SELECT_MASK (7 << 24)
#define TRANS_DDI_MODE_SELECT_HDMI (0 << 24)
#define TRANS_DDI_MODE_SELECT_DVI (1 << 24)
/* For each transcoder, we need to select the corresponding port clock */
#define TRANS_CLK_SEL_DISABLED (0x0 << 29)
#define TRANS_CLK_SEL_PORT(x) (((x) + 1) << 29)
+#define TGL_TRANS_CLK_SEL_DISABLED (0x0 << 28)
+#define TGL_TRANS_CLK_SEL_PORT(x) (((x) + 1) << 28)
+
#define CDCLK_FREQ _MMIO(0x46200)