* breakpoint.c: Eliminate ARGSUSED.
* buildsym.c, cli/cli-cmds.c, cli/cli-script.c: Ditto.
* coffread.c, corelow.c, dwarf2read.c, event-top.c: Ditto.
* exec.c, gcore.c, hpux-thread.c, infcmd.c, inflow.c: Ditto.
* infrun.c, inftarg.c, maint.c, ocd.c, printcmd.c: Ditto.
* procfs.c, regcache.c, remote-rdi.c, remote-sds.c: Ditto.
* remote.c, sol-thread.c, source.c, stabsread.c: Ditto.
* stack.c, symfile.c, target.c, top.c, typeprint.c: Ditto.
* utils.c, v850ice.c, valprint.c, values.c, win32-nat.c: Ditto.
* wince.c, remote-vx.c: Ditto.
2003-09-20 Andrew Cagney <cagney@redhat.com>
+ * breakpoint.c: Eliminate ARGSUSED.
+ * buildsym.c, cli/cli-cmds.c, cli/cli-script.c: Ditto.
+ * coffread.c, corelow.c, dwarf2read.c, event-top.c: Ditto.
+ * exec.c, gcore.c, hpux-thread.c, infcmd.c, inflow.c: Ditto.
+ * infrun.c, inftarg.c, maint.c, ocd.c, printcmd.c: Ditto.
+ * procfs.c, regcache.c, remote-rdi.c, remote-sds.c: Ditto.
+ * remote.c, sol-thread.c, source.c, stabsread.c: Ditto.
+ * stack.c, symfile.c, target.c, top.c, typeprint.c: Ditto.
+ * utils.c, v850ice.c, valprint.c, values.c, win32-nat.c: Ditto.
+ * wince.c, remote-vx.c: Ditto.
+
* cli/cli-script.c: Remove "register" attributes.
* config/pa/tm-hppa.h: Ditto.
* cli/cli-decode.c: Ditto.
error ("No breakpoint number %d.", bnum);
}
-/* ARGSUSED */
static void
commands_command (char *arg, int from_tty)
{
}
/* Stub for cleaning up our state if we error-out of a breakpoint command */
-/* ARGSUSED */
static void
cleanup_executing_breakpoints (void *ignore)
{
annotate_breakpoints_table_end ();
}
-/* ARGSUSED */
static void
breakpoints_info (char *bnum_exp, int from_tty)
{
breakpoint_1 (bnum, 0);
}
-/* ARGSUSED */
static void
maintenance_info_breakpoints (char *bnum_exp, int from_tty)
{
break_command_1 (arg, 0, from_tty);
}
-/* ARGSUSED */
/* accessflag: hw_write: watch write,
hw_read: watch read,
hw_access: watch access (read or write) */
do_exec_cleanups (cleanups);
}
-/* ARGSUSED */
void
until_break_command (char *arg, int from_tty, int anywhere)
{
breakpoint_modify_event (bpt->number);
}
-/* ARGSUSED */
static void
disable_command (char *args, int from_tty)
{
breakpoints) so they once again become (or continue to be) effective
in stopping the inferior. */
-/* ARGSUSED */
static void
enable_command (char *args, int from_tty)
{
do_enable_breakpoint (bpt, disp_disable);
}
-/* ARGSUSED */
static void
enable_once_command (char *args, int from_tty)
{
do_enable_breakpoint (bpt, disp_del);
}
-/* ARGSUSED */
static void
enable_delete_command (char *args, int from_tty)
{
/* At end of reading syms, or in case of quit, really free as many
`struct pending's as we can easily find. */
-/* ARGSUSED */
void
really_free_pendings (void *dummy)
{
/* The "info" command is defined as a prefix, with allow_unknown = 0.
Therefore, its own definition is called only for "info" with no args. */
-/* ARGSUSED */
static void
info_command (char *arg, int from_tty)
{
/* The "show" command with no arguments shows all the settings. */
-/* ARGSUSED */
static void
show_command (char *arg, int from_tty)
{
/* Provide documentation on command or list given by COMMAND. FROM_TTY
is ignored. */
-/* ARGSUSED */
static void
help_command (char *command, int from_tty)
{
/* The "complete" command is used by Emacs to implement completion. */
-/* ARGSUSED */
static void
complete_command (char *arg, int from_tty)
{
return cmd_cfunc_eq (c, complete_command);
}
-/* ARGSUSED */
static void
show_version (char *args, int from_tty)
{
quit_force (args, from_tty);
}
-/* ARGSUSED */
static void
pwd_command (char *args, int from_tty)
{
do_cleanups (old_cleanups);
}
-/* ARGSUSED */
static void
echo_command (char *text, int from_tty)
{
gdb_flush (gdb_stdout);
}
-/* ARGSUSED */
static void
shell_escape (char *arg, int from_tty)
{
Two arguments are interpeted as bounds within which to dump
assembly. */
-/* ARGSUSED */
static void
disassemble_command (char *arg, int from_tty)
{
shell_escape (p, from_tty);
}
-/* ARGSUSED */
static void
show_user (char *args, int from_tty)
{
error_pre_print = p->old_error_pre_print;
}
-/* ARGSUSED */
static void
do_fclose_cleanup (void *stream)
{
of the line table (minimum and maximum file offset) so that the
mainline code can read the whole thing for efficiency. */
-/* ARGSUSED */
static void
find_linenos (bfd *abfd, sec_ptr asect, void *vpinfo)
{
/* Read a symbol file, after initialization by coff_symfile_init. */
-/* ARGSUSED */
static void
coff_symfile_read (struct objfile *objfile, int mainline)
{
and create and return a suitable type object.
Also defines the symbols that represent the values of the type. */
-/* ARGSUSED */
static struct type *
coff_read_enum_type (int index, int length, int lastsym)
{
/* Discard all vestiges of any previous core file and mark data and stack
spaces as empty. */
-/* ARGSUSED */
static void
core_close (int quitting)
{
/* We just get all the registers, so we don't use regno. */
-/* ARGSUSED */
static void
get_core_registers (int regno)
{
/* Empty the abbrev table for a new compilation unit. */
-/* ARGSUSED */
static void
dwarf2_empty_abbrev_table (void *ptr_to_abbrevs_table)
{
/* memory allocation interface */
-/* ARGSUSED */
static void
dwarf2_free_tmp_obstack (void *ignore)
{
\f
/* Called by do_setshow_command. */
-/* ARGSUSED */
void
set_async_editing_command (char *args, int from_tty, struct cmd_list_element *c)
{
}
/* Called by do_setshow_command. */
-/* ARGSUSED */
void
set_async_annotation_level (char *args, int from_tty, struct cmd_list_element *c)
{
}
/* Called by do_setshow_command. */
-/* ARGSUSED */
void
set_async_prompt (char *args, int from_tty, struct cmd_list_element *c)
{
exec_file_attach (args, from_tty);
}
-/* ARGSUSED */
static void
exec_close (int quitting)
{
return 0;
}
-/* ARGSUSED */
static void
make_output_phdrs (bfd *obfd, asection *osec, void *ignored)
{
/* Most target vector functions from here on actually just pass through to
inftarg.c, as they don't need to do anything specific for threads. */
-/* ARGSUSED */
static void
hpux_thread_open (char *arg, int from_tty)
{
\f
/* Compute command-line string given argument vector. This does the
same shell processing as fork_inferior. */
-/* ARGSUSED */
char *
construct_inferior_arguments (struct gdbarch *gdbarch, int argc, char **argv)
{
return 0;
}
-/* ARGSUSED */
void
tty_command (char *file, int from_tty)
{
\f
/* Step until outside of current statement. */
-/* ARGSUSED */
static void
step_command (char *count_string, int from_tty)
{
/* Likewise, but skip over subroutine calls as if single instructions. */
-/* ARGSUSED */
static void
next_command (char *count_string, int from_tty)
{
/* Likewise, but step only one instruction. */
-/* ARGSUSED */
void
stepi_command (char *count_string, int from_tty)
{
step_1 (0, 1, count_string);
}
-/* ARGSUSED */
void
nexti_command (char *count_string, int from_tty)
{
we set. This may involve changes to wait_for_inferior and the
proceed status code. */
-/* ARGSUSED */
static void
until_next_command (int from_tty)
{
}
}
\f
-/* ARGSUSED */
static void
program_info (char *args, int from_tty)
{
static const char path_var_name[] = "PATH";
-/* ARGSUSED */
static void
path_info (char *args, int from_tty)
{
}
}
-/* ARGSUSED */
static void
print_float_info (struct gdbarch *gdbarch, struct ui_file *file,
struct frame_info *frame, const char *args)
print_float_info (current_gdbarch, gdb_stdout, deprecated_selected_frame, args);
}
\f
-/* ARGSUSED */
static void
unset_command (char *args, int from_tty)
{
}
}
-/* ARGSUSED */
void
term_info (char *arg, int from_tty)
{
target_terminal_info (arg, from_tty);
}
-/* ARGSUSED */
void
child_terminal_info (char *args, int from_tty)
{
\f
/* Kill the inferior process. Make us have no inferior. */
-/* ARGSUSED */
static void
kill_command (char *arg, int from_tty)
{
/* Call set_sigint_trap when you need to pass a signal on to an attached
process when handling SIGINT */
-/* ARGSUSED */
static void
pass_signal (int signo)
{
\f
/* Things to clean up if we QUIT out of resume (). */
-/* ARGSUSED */
static void
resume_cleanups (void *ignore)
{
attach_flag ? "attached" : "child", target_pid_to_str (inferior_ptid));
}
-/* ARGSUSED */
static void
child_open (char *arg, int from_tty)
{
}
#ifndef _WIN32
-/* ARGSUSED */
static void
maintenance_dump_me (char *args, int from_tty)
{
allow_unknown 0. Therefore, its own definition is called only for
"maintenance info" with no args. */
-/* ARGSUSED */
static void
maintenance_info_command (char *arg, int from_tty)
{
}
}
-/* ARGSUSED */
static void
maintenance_info_sections (char *arg, int from_tty)
{
}
}
-/* ARGSUSED */
void
maintenance_print_statistics (char *args, int from_tty)
{
allow_unknown 0. Therefore, its own definition is called only for
"maintenance print" with no args. */
-/* ARGSUSED */
static void
maintenance_print_command (char *arg, int from_tty)
{
\f
/* Clean up connection to a remote debugger. */
-/* ARGSUSED */
void
ocd_close (int quitting)
{
nonzero. Returns length of data written or read; 0 for error. TARGET
is ignored. */
-/* ARGSUSED */
int
ocd_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write,
struct mem_attrib *attrib, struct target_ops *target)
inspect_it = 0; /* Reset print routines to normal */
}
-/* ARGSUSED */
static void
print_command (char *exp, int from_tty)
{
}
/* Same as print, except in epoch, it gets its own window */
-/* ARGSUSED */
static void
inspect_command (char *exp, int from_tty)
{
}
/* Same as print, except it doesn't print void results. */
-/* ARGSUSED */
static void
call_command (char *exp, int from_tty)
{
print_command_1 (exp, 0, 0);
}
-/* ARGSUSED */
void
output_command (char *exp, int from_tty)
{
do_cleanups (old_chain);
}
-/* ARGSUSED */
static void
set_command (char *exp, int from_tty)
{
do_cleanups (old_chain);
}
-/* ARGSUSED */
static void
sym_info (char *arg, int from_tty)
{
printf_filtered ("No symbol matches %s.\n", arg);
}
-/* ARGSUSED */
static void
address_info (char *exp, int from_tty)
{
}
}
-/* ARGSUSED */
static void
disable_display_command (char *args, int from_tty)
{
value_print (val, stream, 0, Val_pretty_default);
}
-/* ARGSUSED */
static void
printf_command (char *arg, int from_tty)
{
* Callback function, does the actual work for 'info proc mappings'.
*/
-/* ARGSUSED */
static int
info_mappings_callback (struct prmap *map, int (*ignore) (), void *unused)
{
internal_error (__FILE__, __LINE__, "deprecated_read_fp");
}
-/* ARGSUSED */
static void
reg_flush_command (char *command, int from_tty)
{
/* Read the remote registers into the block REGS. */
-/* ARGSUSED */
static void
arm_rdi_fetch_registers (int regno)
{
if SHOULD_WRITE is nonzero. Returns length of data written or
read; 0 for error. TARGET is unused. */
-/* ARGSUSED */
static int
arm_rdi_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
int should_write, struct mem_attrib *attrib,
/* Clean up connection to a remote debugger. */
-/* ARGSUSED */
static void
sds_close (int quitting)
{
/* Read the remote registers into the block REGS. */
/* Currently we just read all the registers, so we don't use regno. */
-/* ARGSUSED */
static void
sds_fetch_registers (int regno)
{
if SHOULD_WRITE is nonzero. Returns length of data written or
read; 0 for error. TARGET is unused. */
-/* ARGSUSED */
static int
sds_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write,
struct mem_attrib *attrib, struct target_ops *target)
}
/* A vxprocess target should be started via "run" not "target". */
-/*ARGSUSED */
static void
vx_proc_open (char *name, int from_tty)
{
\f
/* Clean up connection to a remote debugger. */
-/* ARGSUSED */
static void
remote_close (int quitting)
{
/* Read the remote registers into the block REGS. */
/* Currently we just read all the registers, so we don't use regnum. */
-/* ARGSUSED */
static void
remote_fetch_registers (int regnum)
{
SHOULD_WRITE is nonzero. Returns length of data written or read; 0
for error. TARGET is unused. */
-/* ARGSUSED */
static int
remote_xfer_memory (CORE_ADDR mem_addr, char *buffer, int mem_len,
int should_write, struct mem_attrib *attrib,
/* Most target vector functions from here on actually just pass through to
procfs.c, as they don't need to do anything specific for threads. */
-
-/* ARGSUSED */
static void
sol_thread_open (char *arg, int from_tty)
{
\f
/* Commands to search the source file for a regexp. */
-/* ARGSUSED */
static void
forward_search_command (char *regex, int from_tty)
{
fclose (stream);
}
-/* ARGSUSED */
static void
reverse_search_command (char *regex, int from_tty)
{
}
}
-/* ARGSUSED */
struct symbol *
define_symbol (CORE_ADDR valu, char *string, int desc, int type,
struct objfile *objfile)
}
}
-/* ARGSUSED */
void
locals_info (char *args, int from_tty)
{
/* Select the frame up one or COUNT stack levels
from the previously selected frame, and print it briefly. */
-/* ARGSUSED */
static void
up_silently_base (char *count_exp)
{
/* Select the frame down one or COUNT stack levels
from the previously selected frame, and print it briefly. */
-/* ARGSUSED */
static void
down_silently_base (char *count_exp)
{
selected_frame_level_changed_event (frame_relative_level (deprecated_selected_frame));
}
-/* ARGSUSED */
static void
down_silently_command (char *count_exp, int from_tty)
{
instead a call to target_link() (in target.c) would supply the
value to use. We are now discontinuing this type of ad hoc syntax. */
-/* ARGSUSED */
static void
add_symbol_file_command (char *args, int from_tty)
{
/* The user just typed 'target' without the name of a target. */
-/* ARGSUSED */
static void
target_command (char *arg, int from_tty)
{
(*current_target.to_load) (arg, from_tty);
}
-/* ARGSUSED */
static int
nomemory (CORE_ADDR memaddr, char *myaddr, int len, int write,
struct target_ops *t)
error ("You can't do that without a process to debug.");
}
-/* ARGSUSED */
static int
nosymbol (char *name, CORE_ADDR *addrp)
{
return 1; /* Symbol does not exist in target env */
}
-/* ARGSUSED */
static void
nosupport_runtime (void)
{
}
-/* ARGSUSED */
static void
default_terminal_info (char *args, int from_tty)
{
return target_xfer_memory_partial (memaddr, buf, len, 1, err);
}
-/* ARGSUSED */
static void
target_info (char *args, int from_tty)
{
}
/* Error-catcher for target_find_memory_regions */
-/* ARGSUSED */
static int dummy_find_memory_regions (int (*ignore1) (), void *ignore2)
{
error ("No target.");
}
/* Error-catcher for target_make_corefile_notes */
-/* ARGSUSED */
static char * dummy_make_corefile_notes (bfd *ignore1, int *ignore2)
{
error ("No target.");
return gdb_has_a_terminal () && (instream == stdin) & caution;
}
\f
-/* ARGSUSED */
static void
dont_repeat_command (char *ignored, int from_tty)
{
}
/* Called by do_setshow_command. */
-/* ARGSUSED */
static void
set_history_size_command (char *args, int from_tty, struct cmd_list_element *c)
{
}
}
-/* ARGSUSED */
void
set_history (char *args, int from_tty)
{
help_list (sethistlist, "set history ", -1, gdb_stdout);
}
-/* ARGSUSED */
void
show_history (char *args, int from_tty)
{
int info_verbose = 0; /* Default verbose msgs off */
/* Called by do_setshow_command. An elaborate joke. */
-/* ARGSUSED */
void
set_verbose (char *args, int from_tty, struct cmd_list_element *c)
{
do_cleanups (old_chain);
}
-/* ARGSUSED */
static void
whatis_command (char *exp, int from_tty)
{
/* TYPENAME is either the name of a type, or an expression. */
-/* ARGSUSED */
static void
ptype_command (char *typename, int from_tty)
{
In such cases, we may not be certain where the first cleanup is, unless
we have a do-nothing one to always use as the base. */
-/* ARGSUSED */
void
null_cleanup (void *arg)
{
wrap_pointer = wrap_buffer; /* Start it at the beginning. */
}
-/* ARGSUSED */
static void
set_width_command (char *args, int from_tty, struct cmd_list_element *c)
{
set_width ();
}
-/* ARGSUSED */
static void
set_height_command (char *args, int from_tty, struct cmd_list_element *c)
{
/* Clean up connection to a remote debugger. */
-/* ARGSUSED */
static void
v850ice_close (int quitting)
{
We can only read/write MAX_BLOCK_SIZE bytes at a time, though, or the DLL
dies. */
-/* ARGSUSED */
static int
v850ice_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
int should_write, struct target_ops *target)
knows what they really did here. Radix setting is confusing, e.g.
setting the input radix to "10" never changes it! */
-/* ARGSUSED */
static void
set_input_radix (char *args, int from_tty, struct cmd_list_element *c)
{
set_input_radix_1 (from_tty, input_radix);
}
-/* ARGSUSED */
static void
set_input_radix_1 (int from_tty, unsigned radix)
{
}
}
-/* ARGSUSED */
static void
set_output_radix (char *args, int from_tty, struct cmd_list_element *c)
{
/* Show both the input and output radices. */
-/*ARGSUSED */
static void
show_radix (char *arg, int from_tty)
{
}
\f
-/*ARGSUSED */
static void
set_print (char *arg, int from_tty)
{
help_list (setprintlist, "set print ", -1, gdb_stdout);
}
-/*ARGSUSED */
static void
show_print (char *args, int from_tty)
{
0 when it is using the value returning conventions (this often
means returning pointer to where structure is vs. returning value). */
-/* ARGSUSED */
struct value *
value_being_returned (struct type *valtype, struct regcache *retbuf,
int struct_return)
attach_flag ? "attached" : "child", target_pid_to_str (inferior_ptid));
}
-/* ARGSUSED */
static void
child_open (char *arg, int from_tty)
{
target_pid_to_str (inferior_ptid));
}
-/* ARGSUSED */
static void
child_open (char *arg, int from_tty)
{
attach_flag ? "attached" : "child", target_pid_to_str (inferior_ptid));
}
-/* ARGSUSED */
static void
child_open (char *arg, int from_tty)
{
projects / external / binutils.git / commitdiff