--- /dev/null
+/* Test GDB's character set support
+ Jim Blandy <jimb@cygnus.com> --- December 2001 */
+
+#include <stdio.h>
+
+
+/* X_string is a null-terminated string in the X charset whose
+ elements are as follows. X should be the name the `set charset'
+ command uses for the character set, in lower-case, with any
+ non-identifier characters replaced with underscores. Where a
+ character set doesn't have the given character, the string should
+ contain the character 'x'.
+
+ [0] --- the `alert' character, '\a'
+ [1] --- the `backspace' character, '\b'
+ [2] --- the `escape' character, '\e'
+ [3] --- the `form feed' character, '\f'
+ [4] --- the `line feed' character, '\n'
+ [5] --- the `carriage return' character, '\r'
+ [6] --- the `horizontal tab' character, '\t'
+ [7] --- the `vertical tab' character, '\v'
+ [8 .. 33] --- the uppercase letters A-Z
+ [34 .. 59] --- the lowercase letters a-z
+ [60 .. 69] --- the digits 0-9
+ [70] --- the `cent' character
+ [71] --- a control character with no defined backslash escape
+
+ Feel free to extend these as you like. */
+
+#define NUM_CHARS (72)
+
+char ascii_string[NUM_CHARS];
+char iso_8859_1_string[NUM_CHARS];
+char ebcdic_us_string[NUM_CHARS];
+char ibm1047_string[NUM_CHARS];
+
+
+void
+init_string (char string[],
+ char x,
+ char alert, char backspace, char escape, char form_feed,
+ char line_feed, char carriage_return, char horizontal_tab,
+ char vertical_tab, char cent, char misc_ctrl)
+{
+ memset (string, x, NUM_CHARS);
+ string[0] = alert;
+ string[1] = backspace;
+ string[2] = escape;
+ string[3] = form_feed;
+ string[4] = line_feed;
+ string[5] = carriage_return;
+ string[6] = horizontal_tab;
+ string[7] = vertical_tab;
+ string[70] = cent;
+ string[71] = misc_ctrl;
+}
+
+
+void
+fill_run (char string[], int start, int len, int first)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ string[start + i] = first + i;
+}
+
+
+int main ()
+{
+#ifdef usestubs
+ set_debug_traps();
+ breakpoint();
+#endif
+ (void) malloc (1);
+ /* Initialize ascii_string. */
+ init_string (ascii_string,
+ 120,
+ 7, 8, 27, 12,
+ 10, 13, 9,
+ 11, 120, 17);
+ fill_run (ascii_string, 8, 26, 65);
+ fill_run (ascii_string, 34, 26, 97);
+ fill_run (ascii_string, 60, 10, 48);
+
+ /* Initialize iso_8859_1_string. */
+ init_string (iso_8859_1_string,
+ 120,
+ 7, 8, 27, 12,
+ 10, 13, 9,
+ 11, 162, 17);
+ fill_run (iso_8859_1_string, 8, 26, 65);
+ fill_run (iso_8859_1_string, 34, 26, 97);
+ fill_run (iso_8859_1_string, 60, 10, 48);
+
+ /* Initialize ebcdic_us_string. */
+ init_string (ebcdic_us_string,
+ 167,
+ 47, 22, 39, 12,
+ 37, 13, 5,
+ 11, 74, 17);
+ /* In EBCDIC, the upper-case letters are broken into three separate runs. */
+ fill_run (ebcdic_us_string, 8, 9, 193);
+ fill_run (ebcdic_us_string, 17, 9, 209);
+ fill_run (ebcdic_us_string, 26, 8, 226);
+ /* The lower-case letters are, too. */
+ fill_run (ebcdic_us_string, 34, 9, 129);
+ fill_run (ebcdic_us_string, 43, 9, 145);
+ fill_run (ebcdic_us_string, 52, 8, 162);
+ /* The digits, at least, are contiguous. */
+ fill_run (ebcdic_us_string, 60, 10, 240);
+
+ /* Initialize ibm1047_string. */
+ init_string (ibm1047_string,
+ 167,
+ 47, 22, 39, 12,
+ 37, 13, 5,
+ 11, 74, 17);
+ /* In EBCDIC, the upper-case letters are broken into three separate runs. */
+ fill_run (ibm1047_string, 8, 9, 193);
+ fill_run (ibm1047_string, 17, 9, 209);
+ fill_run (ibm1047_string, 26, 8, 226);
+ /* The lower-case letters are, too. */
+ fill_run (ibm1047_string, 34, 9, 129);
+ fill_run (ibm1047_string, 43, 9, 145);
+ fill_run (ibm1047_string, 52, 8, 162);
+ /* The digits, at least, are contiguous. */
+ fill_run (ibm1047_string, 60, 10, 240);
+
+ puts ("All set!"); /* all strings initialized */
+}
--- /dev/null
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Test GDB's character set support.
+
+if $tracelevel then {
+ strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "charset"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+ gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb.
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Parse the output from a `show charset' command. Return the host
+# and target charset as a two-element list.
+proc parse_show_charset_output {testname} {
+ global gdb_prompt
+
+ gdb_expect {
+ -re "The current host and target character set is `(.*)'\\.\[\r\n\]+$gdb_prompt $" {
+ set host_charset $expect_out(1,string)
+ set target_charset $expect_out(1,string)
+ pass $testname
+ }
+ -re "The current host character set is `(.*)'\\.\[\r\n\]+The current target character set is `(.*)'\\.\[\r\n\]+$gdb_prompt $" {
+ set host_charset $expect_out(1,string)
+ set target_charset $expect_out(2,string)
+ pass $testname
+ }
+ -re ".*$gdb_prompt $" {
+ fail $testname
+ }
+ timeout {
+ fail "$testname (timeout)"
+ }
+ }
+
+ return [list $host_charset $target_charset]
+}
+
+
+# Try the various `show charset' commands. These are all aliases of each
+# other; `show target-charset' and `show host-charset' actually print
+# both the host and target charsets.
+
+send_gdb "show charset\n"
+set show_charset [parse_show_charset_output "show charset"]
+
+send_gdb "show target-charset\n"
+set show_target_charset [parse_show_charset_output "show target-charset"]
+
+if {! [string compare $show_charset $show_target_charset]} {
+ pass "check `show target-charset' against `show charset'"
+} else {
+ fail "check `show target-charset' against `show charset'"
+}
+
+send_gdb "show host-charset\n"
+set show_host_charset [parse_show_charset_output "show host-charset"]
+
+if {! [string compare $show_charset $show_host_charset]} {
+ pass "check `show host-charset' against `show charset'"
+} else {
+ fail "check `show host-charset' against `show charset'"
+}
+
+
+# Get the list of supported charsets.
+send_gdb "set charset\n"
+
+# True iff we've seen the "Valid character sets are:" message.
+set seen_valid 0
+
+# True iff we've seen the "can be used as a host character set" message.
+set seen_can_host 0
+
+# A Tcl array mapping the names of all the character sets we've seen
+# to "1" if the character set can be used as a host character set, or
+# "0" otherwise. We can use `array names charsets' just to get a list
+# of all character sets.
+array set charsets {}
+
+proc all_charset_names {} {
+ global charsets
+ return [array names charsets]
+}
+
+proc charset_exists {charset} {
+ global charsets
+ return [info exists charsets($charset)]
+}
+
+proc valid_host_charset {charset} {
+ global charsets
+ return $charsets($charset)
+}
+
+gdb_expect {
+ -re "Valid character sets are:\[\r\n\]+" {
+ # There's no ^ at the beginning of the pattern above, so that
+ # expect can skip the echoed `set charset' command.
+ set seen_valid 1
+ exp_continue
+ }
+ -re "^ (\[^ \t\n\]*) \\*\[\r\n\]+" {
+ set charsets($expect_out(1,string)) 1
+ exp_continue
+ }
+ -re "^ (\[^ \t\n\]*)\[ \t\]*\[\r\n\]+" {
+ set charsets($expect_out(1,string)) 0
+ exp_continue
+ }
+ -re "^\\* - can be used as a host character set\[\r\n\]+" {
+ set seen_can_host 1
+ exp_continue
+ }
+ -re ".*${gdb_prompt} $" {
+ # We don't do an exp_continue here.
+ }
+ timeout {
+ fail "get valid character sets (timeout)"
+ }
+}
+
+
+# Check that we've seen all the right pieces of the output, and that
+# we can at least use ASCII as a host character set.
+if {$seen_valid && $seen_can_host && [charset_exists ascii]} {
+ # We can't do the below as part of the test above, since all the
+ # [] substitution takes place before any expression evaluation
+ # takes place; && doesn't really short circuit things the way
+ # you'd like. We'd get an "can't read $charsets(ascii)" error
+ # even when `info exists' had returned zero.
+ if {[valid_host_charset ascii]} {
+ pass "get valid character sets"
+ } else {
+ fail "get valid character sets"
+ }
+} else {
+ fail "get valid character sets (no ascii charset)"
+}
+
+
+# Try using `set host-charset' on an invalid character set.
+gdb_test "set host-charset my_grandma_bonnie" \
+ "GDB doesn't know of any character set named `my_grandma_bonnie'." \
+ "try `set host-charset' with invalid charset"
+
+
+# Try using `set target-charset' on an invalid character set.
+gdb_test "set target-charset my_grandma_bonnie" \
+ "GDB doesn't know of any character set named `my_grandma_bonnie'." \
+ "try `set target-charset' with invalid charset"
+
+
+# Make sure that GDB supports every host/target charset combination.
+foreach host_charset [all_charset_names] {
+ if {[valid_host_charset $host_charset]} {
+
+ set testname "try `set host-charset $host_charset'"
+ send_gdb "set host-charset $host_charset\n"
+ gdb_expect {
+ -re "GDB doesn't know of any character set named.*\[\r\n]+${gdb_prompt} $" {
+ # How did it get into `charsets' then?
+ fail "$testname (didn't recognize name)"
+ }
+ -re "GDB can't use `.*' as its host character set\\.\[\r\n]+${gdb_prompt} $" {
+ # Well, then why does its `charsets' entry say it can?
+ fail $testname
+ }
+ -re "${gdb_prompt} $" {
+ pass $testname
+ }
+ timeout {
+ fail "$testname (timeout)"
+ }
+ }
+
+ # Check that the command actually had its intended effect:
+ # $host_charset should now be the host character set.
+ send_gdb "show charset\n"
+ set result [parse_show_charset_output "parse `show charset' after `set host-charset $host_charset'"]
+ if {! [string compare [lindex $result 0] $host_charset]} {
+ pass "check effect of `set host-charset $host_charset'"
+ } else {
+ fail "check effect of `set host-charset $host_charset'"
+ }
+
+ # Now try setting every possible target character set,
+ # given that host charset.
+ foreach target_charset [all_charset_names] {
+ set testname "try `set target-charset $target_charset'"
+ send_gdb "set target-charset $target_charset\n"
+ gdb_expect {
+ -re "GDB doesn't know of any character set named.*\[\r\n]+${gdb_prompt} $" {
+ fail "$testname (didn't recognize name)"
+ }
+ -re "GDB can't convert from the .* character set to .*\\.\[\r\n\]+${gdb_prompt} $" {
+ # This is a serious problem. GDB should be able to convert
+ # between any arbitrary pair of character sets.
+ fail "$testname (can't convert)"
+ }
+ -re "${gdb_prompt} $" {
+ pass $testname
+ }
+ timeout {
+ fail "$testname (timeout)"
+ }
+ }
+
+ # Check that the command actually had its intended effect:
+ # $target_charset should now be the target charset.
+ send_gdb "show charset\n"
+ set result [parse_show_charset_output "parse `show charset' after `set target-charset $target_charset'"]
+ if {! [string compare $result [list $host_charset $target_charset]]} {
+ pass "check effect of `set target-charset $target_charset'"
+ } else {
+ fail "check effect of `set target-charset $target_charset'"
+ }
+
+ # Test handling of characters in the host charset which
+ # can't be translated into the target charset. \xA2 is
+ # `cent' in ISO-8859-1, which has no equivalent in ASCII.
+ #
+ # On some systems, the pseudo-tty through which we
+ # communicate with GDB insists on stripping the high bit
+ # from input characters, meaning that `cent' turns into
+ # `"'. Since ISO-8859-1 and ASCII are identical in the
+ # lower 128 characters, it's tough to see how we can test
+ # this behavior on such systems, so we just xfail it.
+ #
+ # Note: the \x16 (Control-V) is an escape to allow \xA2 to
+ # get past readline.
+ if {! [string compare $host_charset iso-8859-1] && ! [string compare $target_charset ascii]} {
+
+ set testname "untranslatable character in character literal"
+ send_gdb "print '\x16\xA2'\n"
+ gdb_expect {
+ -re "There is no character corresponding to .* in the target character set .*\\.\[\r\n\]+$gdb_prompt $" {
+ pass $testname
+ }
+ -re " = 34 '\"'\[\r\n\]+$gdb_prompt $" {
+ xfail "$testname (DejaGNU's pseudo-tty strips eighth bit)"
+ }
+ -re "$gdb_prompt $" {
+ fail $testname
+ }
+ timeout {
+ fail "$testname (timeout)"
+ }
+ }
+
+ set testname "untranslatable character in string literal"
+ # If the PTTY zeros bit seven, then this turns into
+ # print """
+ # which gets us a syntax error. We don't care.
+ send_gdb "print \"\x16\xA2\"\n"
+ gdb_expect {
+ -re "There is no character corresponding to .* in the target character set .*\\.\[\r\n\]+$gdb_prompt $" {
+ pass $testname
+ }
+ -re "Unterminated string in expression.\[\r\n\]+$gdb_prompt $" {
+ xfail "$testname (DejaGNU's pseudo-tty strips eighth bit)"
+ }
+ -re "$gdb_prompt $" {
+ fail $testname
+ }
+ timeout {
+ fail "$testname (timeout)"
+ }
+ }
+
+ set testname "untranslatable characters in backslash escape"
+ send_gdb "print '\\\x16\xA2'\n"
+ gdb_expect {
+ -re "The escape sequence .* is equivalent to plain .*, which has no equivalent\[\r\n\]+in the .* character set\\.\[\r\n\]+$gdb_prompt $" {
+ pass $testname
+ }
+ -re " = 34 '\"'\[\r\n\]+$gdb_prompt $" {
+ xfail "$testname (DejaGNU's pseudo-tty strips eighth bit)"
+ }
+ -re "$gdb_prompt $" {
+ fail $testname
+ }
+ timeout {
+ fail "$testname (timeout)"
+ }
+ }
+ }
+ }
+ }
+}
+
+
+# Set the host character set to plain ASCII, and try actually printing
+# some strings in various target character sets. We need to run the
+# test program to the point at which the strings have been
+# initialized.
+gdb_test "break [gdb_get_line_number "all strings initialized"]" \
+ ".*Breakpoint.* at .*" \
+ "set breakpoint after all strings have been initialized"
+gdb_run_cmd
+gdb_expect {
+ -re "Breakpoint.*all strings initialized.*$gdb_prompt $" {
+ pass "run until all strings have been initialized"
+ }
+ -re "$gdb_prompt $" {
+ fail "run until all strings have been initialized"
+ }
+ timeout {
+ fail "run until all strings have been initialized (timeout)"
+ }
+}
+
+
+gdb_test "set host-charset ascii" ""
+foreach target_charset [all_charset_names] {
+ send_gdb "set target-charset $target_charset\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {
+ pass "set target-charset $target_charset"
+ }
+ timeout {
+ fail "set target-charset $target_charset (timeout)"
+ }
+ }
+
+ # Try printing the null character. There seems to be a bug in
+ # gdb_test that requires us to use gdb_expect here.
+ send_gdb "print '\\0'\n"
+ gdb_expect {
+ -re "\\\$${decimal} = 0 '\\\\0'\[\r\n\]+$gdb_prompt $" {
+ pass "print the null character in ${target_charset}"
+ }
+ -re "$gdb_prompt $" {
+ fail "print the null character in ${target_charset}"
+ }
+ timeout {
+ fail "print the null character in ${target_charset} (timeout)"
+ }
+ }
+
+ # Compute the name of the variable in the test program that holds
+ # a string in $target_charset. The variable's name is the
+ # character set's name, in lower-case, with all non-identifier
+ # characters replaced with '_', with "_string" stuck on the end.
+ set var_name [string tolower "${target_charset}_string"]
+ regsub -all -- "\[^a-z0-9_\]" $var_name "_" var_name
+
+ # Compute a regexp matching the results we expect. This is static,
+ # but it's easier than writing it out.
+ regsub -all "." "abefnrtv" "(\\\\&|x)" escapes
+ set uppercase "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+ set lowercase "abcdefghijklmnopqrstuvwxyz"
+ set digits "0123456789"
+ set octal_escape "\\\\\[0-9\]\[0-9\]\[0-9\]"
+
+ send_gdb "print $var_name\n"
+ # ${escapes}${uppercase}${lowercase}${digits}${octal}${octal}
+ gdb_expect {
+ -re ".* = \"(\\\\a|x)(\\\\b|x)(\\\\e|x)(\\\\f|x)(\\\\n|x)(\\\\r|x)(\\\\t|x)(\\\\v|x)${uppercase}${lowercase}${digits}(\\\\\[0-9\]\[0-9\]\[0-9\]|x)(\\\\\[0-9\]\[0-9\]\[0-9\]|x).*\"\[\r\n\]+$gdb_prompt $" {
+ pass "print string in $target_charset"
+ }
+ -re "$gdb_prompt $" {
+ fail "print string in $target_charset"
+ }
+ timeout {
+ fail "print string in $target_charset (timeout)"
+ }
+ }
+
+ # Try entering a character literal, and see if it comes back unchanged.
+ gdb_test "print 'A'" \
+ " = \[0-9-\]+ 'A'" \
+ "parse character literal in ${target_charset}"
+
+ # Check that the character literal was encoded correctly.
+ gdb_test "print 'A' == $var_name\[8\]" \
+ " = 1" \
+ "check value of parsed character literal in ${target_charset}"
+
+ # Try entering a string literal, and see if it comes back unchanged.
+ gdb_test "print \"abcdefABCDEF012345\"" \
+ " = \"abcdefABCDEF012345\"" \
+ "parse string literal in ${target_charset}"
+
+ # Check that the string literal was encoded correctly.
+ gdb_test "print \"q\"\[0\] == $var_name\[50\]" \
+ " = 1" \
+ "check value of parsed string literal in ${target_charset}"
+
+ # Test handling of characters in the target charset which
+ # can't be translated into the host charset.
+ if {! [string compare $target_charset iso-8859-1]} {
+ gdb_test "print iso_8859_1_string\[70\]" \
+ " = \[0-9-\]+ '\\\\242'" \
+ "print character with no equivalent in host character set"
+ gdb_test "print iso_8859_1_string + 70" \
+ " = ${hex} \"\\\\242.*\"" \
+ "print string with no equivalent in host character set"
+ }
+
+ # Make sure that we don't apply the ISO-8859-1 `print_literally'
+ # function to ASCII.
+ if {! [string compare $target_charset ascii]} {
+ gdb_test "print iso_8859_1_string\[70\]" \
+ " = \[0-9-\]+ '\\\\242'" \
+ "print ASCII unprintable character"
+ gdb_test "print iso_8859_1_string + 70" \
+ " = ${hex} \"\\\\242.*\"" \
+ "print ASCII unprintable string"
+ }
+
+ # Try printing characters with backslash escape equivalents.
+ set escapees {a b e f n r t v}
+ for {set i 0} {$i < [llength $escapees]} {incr i} {
+ set escape [lindex $escapees $i]
+ send_gdb "print $var_name\[$i\]\n"
+ set have_escape 1
+ gdb_expect {
+ -re "= \[0-9-\]+ '\\\\${escape}'\[\r\n\]+$gdb_prompt $" {
+ pass "try printing '\\${escape}' in ${target_charset}"
+ }
+ -re "= \[0-9-\]+ 'x'\[\r\n\]+$gdb_prompt $" {
+ xfail "try printing '\\${escape}' in ${target_charset} (no such escape)"
+ set have_escape 0
+ }
+ -re "$gdb_prompt $" {
+ fail "try printing '\\${escape}' in ${target_charset}"
+ }
+ timeout {
+ fail "try printing '\\${escape}' in ${target_charset} (timeout)"
+ }
+ }
+
+ if {$have_escape} {
+
+ # Try parsing a backslash escape in a character literal.
+ gdb_test "print '\\${escape}' == $var_name\[$i\]" \
+ " = 1" \
+ "check value of '\\${escape}' in ${target_charset}"
+
+ # Try parsing a backslash escape in a string literal.
+ gdb_test "print \"\\${escape}\"\[0\] == $var_name\[$i\]" \
+ " = 1" \
+ "check value of \"\\${escape}\" in ${target_charset}"
+ }
+ }
+
+ # Try printing a character escape that doesn't exist. We should
+ # get the unescaped character, in the target character set.
+ gdb_test "print '\\q'" " = \[0-9-\]+ 'q'" \
+ "print escape that doesn't exist in $target_charset"
+ gdb_test "print '\\q' == $var_name\[50\]" " = 1" \
+ "check value of escape that doesn't exist in $target_charset"
+}
+
+gdb_exit
projects / external / binutils.git / commitdiff