[media] saa7164: Adding support for HVR2200 card id 0x8953

Thanks to Greg Tangey for prompting me to merge this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index c713691..971591d 100644 (file)
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -447,6 +447,62 @@ struct saa7164_board saa7164_boards[] = {
                        .i2c_reg_len    = REGLEN_8bit,
                } },
        },
+       [SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
+               .name           = "Hauppauge WinTV-HVR2200",
+               .porta          = SAA7164_MPEG_DVB,
+               .portb          = SAA7164_MPEG_DVB,
+               .chiprev        = SAA7164_CHIP_REV3,
+               .unit           = {{
+                       .id             = 0x23,
+                       .type           = SAA7164_UNIT_EEPROM,
+                       .name           = "4K EEPROM",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_0,
+                       .i2c_bus_addr   = 0xa0 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               }, {
+                       .id             = 0x04,
+                       .type           = SAA7164_UNIT_TUNER,
+                       .name           = "TDA18271-1",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_1,
+                       .i2c_bus_addr   = 0xc0 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               }, {
+                       .id             = 0x05,
+                       .type           = SAA7164_UNIT_ANALOG_DEMODULATOR,
+                       .name           = "TDA8290-1",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_1,
+                       .i2c_bus_addr   = 0x84 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               }, {
+                       .id             = 0x21,
+                       .type           = SAA7164_UNIT_TUNER,
+                       .name           = "TDA18271-2",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_2,
+                       .i2c_bus_addr   = 0xc0 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               }, {
+                       .id             = 0x22,
+                       .type           = SAA7164_UNIT_ANALOG_DEMODULATOR,
+                       .name           = "TDA8290-2",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_2,
+                       .i2c_bus_addr   = 0x84 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               }, {
+                       .id             = 0x24,
+                       .type           = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+                       .name           = "TDA10048-1",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_1,
+                       .i2c_bus_addr   = 0x10 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               }, {
+                       .id             = 0x25,
+                       .type           = SAA7164_UNIT_DIGITAL_DEMODULATOR,
+                       .name           = "TDA10048-2",
+                       .i2c_bus_nr     = SAA7164_I2C_BUS_2,
+                       .i2c_bus_addr   = 0x12 >> 1,
+                       .i2c_reg_len    = REGLEN_8bit,
+               } },
+       },
 };
 const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
 
@@ -490,6 +546,10 @@ struct saa7164_subid saa7164_subids[] = {
                .subvendor = 0x0070,
                .subdevice = 0x8940,
                .card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
+       }, {
+               .subvendor = 0x0070,
+               .subdevice = 0x8953,
+               .card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
        },
 };
 const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -534,6 +594,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+       case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
        case SAA7164_BOARD_HAUPPAUGE_HVR2250:
        case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
        case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -615,6 +676,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+       case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
        case SAA7164_BOARD_HAUPPAUGE_HVR2250:
        case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
        case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:

diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index d377937..5c5cc3e 100644 (file)
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -476,6 +476,7 @@ int saa7164_dvb_register(struct saa7164_port *port)
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
        case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+       case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
                i2c_bus = &dev->i2c_bus[port->nr + 1];
                switch (port->nr) {
                case 0:

diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 35b6430..742b341 100644 (file)
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -83,6 +83,7 @@
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2      7
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3      8
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_4      9
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_5      10
 
 #define SAA7164_MAX_UNITS              8
 #define SAA7164_TS_NUMBER_OF_LINES     312