int amdgpu_noretry = -1;
int amdgpu_force_asic_type = -1;
int amdgpu_tmz = -1; /* auto */
-uint amdgpu_freesync_vid_mode;
int amdgpu_reset_method = -1; /* auto */
int amdgpu_num_kcq = -1;
int amdgpu_smartshift_bias;
MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)");
module_param_named(tmz, amdgpu_tmz, int, 0444);
-/**
- * DOC: freesync_video (uint)
- * Enable the optimization to adjust front porch timing to achieve seamless
- * mode change experience when setting a freesync supported mode for which full
- * modeset is not needed.
- *
- * The Display Core will add a set of modes derived from the base FreeSync
- * video mode into the corresponding connector's mode list based on commonly
- * used refresh rates and VRR range of the connected display, when users enable
- * this feature. From the userspace perspective, they can see a seamless mode
- * change experience when the change between different refresh rates under the
- * same resolution. Additionally, userspace applications such as Video playback
- * can read this modeset list and change the refresh rate based on the video
- * frame rate. Finally, the userspace can also derive an appropriate mode for a
- * particular refresh rate based on the FreeSync Mode and add it to the
- * connector's mode list.
- *
- * Note: This is an experimental feature.
- *
- * The default value: 0 (off).
- */
-MODULE_PARM_DESC(
- freesync_video,
- "Enable freesync modesetting optimization feature (0 = off (default), 1 = on)");
-module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
-
/**
* DOC: reset_method (int)
* GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco, 5 = pci)
*/
DRM_DEBUG_DRIVER("No preferred mode found\n");
} else {
- recalculate_timing = amdgpu_freesync_vid_mode &&
- is_freesync_video_mode(&mode, aconnector);
+ recalculate_timing = is_freesync_video_mode(&mode, aconnector);
if (recalculate_timing) {
freesync_mode = get_highest_refresh_rate_mode(aconnector, false);
saved_mode = mode;
struct amdgpu_dm_connector *amdgpu_dm_connector =
to_amdgpu_dm_connector(connector);
- if (!(amdgpu_freesync_vid_mode && edid))
+ if (!edid)
return;
if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10)
* TODO: Refactor this function to allow this check to work
* in all conditions.
*/
- if (amdgpu_freesync_vid_mode &&
- dm_new_crtc_state->stream &&
+ if (dm_new_crtc_state->stream &&
is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state))
goto skip_modeset;
if (!dm_old_crtc_state->stream)
goto skip_modeset;
- if (amdgpu_freesync_vid_mode && dm_new_crtc_state->stream &&
+ if (dm_new_crtc_state->stream &&
is_timing_unchanged_for_freesync(new_crtc_state,
old_crtc_state)) {
new_crtc_state->mode_changed = false;
set_freesync_fixed_config(dm_new_crtc_state);
goto skip_modeset;
- } else if (amdgpu_freesync_vid_mode && aconnector &&
+ } else if (aconnector &&
is_freesync_video_mode(&new_crtc_state->mode,
aconnector)) {
struct drm_display_mode *high_mode;