ide-pmac: use __ide_wait_stat()
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 13 Oct 2007 15:47:49 +0000 (17:47 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 13 Oct 2007 15:47:49 +0000 (17:47 +0200)
* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature().

While at it do following changes to match __ide_wait_stat() call in
ide_config_drive_speed():

* Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT.

* Check DRQ_STAT bit (shouldn't be set for good device status).

Also remove no longer needed wait_for_ready() from ide-iops.c.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-iops.c
drivers/ide/ppc/pmac.c
include/linux/ide.h

index fb524cf..f7e976c 100644 (file)
@@ -473,35 +473,6 @@ int drive_is_ready (ide_drive_t *drive)
 EXPORT_SYMBOL(drive_is_ready);
 
 /*
- * Global for All, and taken from ide-pmac.c. Can be called
- * with spinlock held & IRQs disabled, so don't schedule !
- */
-int wait_for_ready (ide_drive_t *drive, int timeout)
-{
-       ide_hwif_t *hwif        = HWIF(drive);
-       u8 stat                 = 0;
-
-       while(--timeout) {
-               stat = hwif->INB(IDE_STATUS_REG);
-               if (!(stat & BUSY_STAT)) {
-                       if (drive->ready_stat == 0)
-                               break;
-                       else if ((stat & drive->ready_stat)||(stat & ERR_STAT))
-                               break;
-               }
-               mdelay(1);
-       }
-       if ((stat & ERR_STAT) || timeout <= 0) {
-               if (stat & ERR_STAT) {
-                       printk(KERN_ERR "%s: wait_for_ready, "
-                               "error status: %x\n", drive->name, stat);
-               }
-               return 1;
-       }
-       return 0;
-}
-
-/*
  * This routine busy-waits for the drive status to be not "busy".
  * It then checks the status for all of the "good" bits and none
  * of the "bad" bits, and if all is okay it returns 0.  All other
@@ -512,7 +483,7 @@ int wait_for_ready (ide_drive_t *drive, int timeout)
  * setting a timer to wake up at half second intervals thereafter,
  * until timeout is achieved, before timing out.
  */
-static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
+int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
 {
        ide_hwif_t *hwif = drive->hwif;
        unsigned long flags;
index 512452b..13e2664 100644 (file)
@@ -541,7 +541,8 @@ static int
 pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
 {
        ide_hwif_t *hwif = HWIF(drive);
-       int result = 1;
+       int result;
+       u8 stat;
        
        disable_irq_nosync(hwif->irq);
        udelay(1);
@@ -552,9 +553,9 @@ pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
        hwif->OUTB(command, IDE_NSECTOR_REG);
        hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
        hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
-       udelay(1);
-       /* Timeout bumped for some powerbooks */
-       result = wait_for_ready(drive, 2000);
+       result = __ide_wait_stat(drive, drive->ready_stat,
+                                BUSY_STAT|DRQ_STAT|ERR_STAT,
+                                WAIT_CMD, &stat);
        hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
        if (result)
                printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
index 3a8cb81..d86115e 100644 (file)
@@ -1153,7 +1153,7 @@ extern void SELECT_MASK(ide_drive_t *, int);
 extern void QUIRK_LIST(ide_drive_t *);
 
 extern int drive_is_ready(ide_drive_t *);
-extern int wait_for_ready(ide_drive_t *, int /* timeout */);
+int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long);
 
 /*
  * taskfile io for disks for now...and builds request from ide_ioctl