Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. Although it is for type C, HW engineers reported
that it can be applied to all external ports even if they are not going
to type C.
For CNL we apply the workaround every time Aux B, C and D are powering
up since they will lose the configuration when powered down.
v2: Use common tag for WA
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128220553.22435-1-lucas.demarchi@intel.com
#define SKL_PW_TO_PG(pw) ((pw) - SKL_DISP_PW_1 + SKL_PG1)
#define SKL_FUSE_PG_DIST_STATUS(pg) (1 << (27 - (pg)))
+#define _CNL_AUX_REG_IDX(pw) ((pw - 1) >> 4)
+#define _CNL_AUX_ANAOVRD1_B 0x162250
+#define _CNL_AUX_ANAOVRD1_C 0x162210
+#define _CNL_AUX_ANAOVRD1_D 0x1622D0
+#define CNL_AUX_ANAOVRD1(pw) _MMIO(_PICK(_CNL_AUX_REG_IDX(pw), \
+ _CNL_AUX_ANAOVRD1_B, \
+ _CNL_AUX_ANAOVRD1_C, \
+ _CNL_AUX_ANAOVRD1_D))
+#define CNL_AUX_ANAOVRD1_ENABLE (1<<16)
+#define CNL_AUX_ANAOVRD1_LDO_BYPASS (1<<23)
+
/* Per-pipe DDI Function Control */
#define _TRANS_DDI_FUNC_CTL_A 0x60400
#define _TRANS_DDI_FUNC_CTL_B 0x61400
I915_WRITE(HSW_PWR_WELL_CTL_DRIVER(id), val | HSW_PWR_WELL_CTL_REQ(id));
hsw_wait_for_power_well_enable(dev_priv, power_well);
+ /* Display WA #1178: cnl */
+ if (IS_CANNONLAKE(dev_priv) &&
+ (id == CNL_DISP_PW_AUX_B || id == CNL_DISP_PW_AUX_C ||
+ id == CNL_DISP_PW_AUX_D)) {
+ val = I915_READ(CNL_AUX_ANAOVRD1(id));
+ val |= CNL_AUX_ANAOVRD1_ENABLE | CNL_AUX_ANAOVRD1_LDO_BYPASS;
+ I915_WRITE(CNL_AUX_ANAOVRD1(id), val);
+ }
+
if (wait_fuses)
gen9_wait_for_power_well_fuses(dev_priv, pg);