gpio: grgpio: Add device driver for GRGPIO cores

This driver supports GRGPIO gpio cores available in the GRLIB VHDL IP
core library from Aeroflex Gaisler.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt
new file mode 100644 (file)
index 0000000..1ec46fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt
@@ -0,0 +1,21 @@
+Aeroflex Gaisler GRGPIO General Purpose I/O cores.
+
+The GRGPIO GPIO core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the GRGPIO core, a Leon SPARC system,
+these properties are built from information in the AMBA plug&play.
+
+Required properties:
+
+- name : Should be "GAISLER_GPIO" or "01_01a"
+
+- reg : Address and length of the register set for the device
+
+- interrupts : Interrupt numbers for this device
+
+Optional properties:
+
+- nbits : The number of gpio lines. If not present driver assumes 32 lines.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 704d01d..345c667 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -309,6 +309,15 @@ config GPIO_LYNXPOINT
          driver for GPIO functionality on Intel Lynxpoint PCH chipset
          Requires ACPI device enumeration code to set up a platform device.
 
+config GPIO_GRGPIO
+       tristate "Aeroflex Gaisler GRGPIO support"
+       depends on OF
+       select GPIO_GENERIC
+       select IRQ_DOMAIN
+       help
+         Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
+         VHDL IP core library.
+
 comment "I2C GPIO expanders:"
 
 config GPIO_ARIZONA

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22e07bc..3e6be51 100644 (file)
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_DAVINCI)    += gpio-davinci.o
 obj-$(CONFIG_GPIO_EM)          += gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)      += gpio-ep93xx.o
 obj-$(CONFIG_GPIO_GE_FPGA)     += gpio-ge.o
+obj-$(CONFIG_GPIO_GRGPIO)      += gpio-grgpio.o
 obj-$(CONFIG_GPIO_ICH)         += gpio-ich.o
 obj-$(CONFIG_GPIO_IT8761E)     += gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)    += gpio-janz-ttl.o

diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c
new file mode 100644 (file)
index 0000000..466a1c7
--- /dev/null
+++ b/drivers/gpio/gpio-grgpio.c
@@ -0,0 +1,149 @@
+/*
+ * Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores.
+ *
+ * 2013 (c) Aeroflex Gaisler AB
+ *
+ * This driver supports the GRGPIO GPIO core available in the GRLIB VHDL
+ * IP core library.
+ *
+ * Full documentation of the GRGPIO core can be found here:
+ * http://www.gaisler.com/products/grlib/grip.pdf
+ *
+ * See "Documentation/devicetree/bindings/gpio/gpio-grgpio.txt" for
+ * information on open firmware properties.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Contributors: Andreas Larsson <andreas@gaisler.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/basic_mmio_gpio.h>
+
+#define GRGPIO_MAX_NGPIO 32
+
+#define GRGPIO_DATA            0x00
+#define GRGPIO_OUTPUT          0x04
+#define GRGPIO_DIR             0x08
+#define GRGPIO_IMASK           0x0c
+#define GRGPIO_IPOL            0x10
+#define GRGPIO_IEDGE           0x14
+#define GRGPIO_BYPASS          0x18
+#define GRGPIO_IMAP_BASE       0x20
+
+struct grgpio_priv {
+       struct bgpio_chip bgc;
+       void __iomem *regs;
+       struct device *dev;
+};
+
+static inline struct grgpio_priv *grgpio_gc_to_priv(struct gpio_chip *gc)
+{
+       struct bgpio_chip *bgc = to_bgpio_chip(gc);
+
+       return container_of(bgc, struct grgpio_priv, bgc);
+}
+
+static int grgpio_probe(struct platform_device *ofdev)
+{
+       struct device_node *np = ofdev->dev.of_node;
+       void  __iomem *regs;
+       struct gpio_chip *gc;
+       struct bgpio_chip *bgc;
+       struct grgpio_priv *priv;
+       struct resource *res;
+       int err;
+       u32 prop;
+
+       priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
+       regs = devm_ioremap_resource(&ofdev->dev, res);
+       if (IS_ERR(regs))
+               return PTR_ERR(regs);
+
+       bgc = &priv->bgc;
+       err = bgpio_init(bgc, &ofdev->dev, 4, regs + GRGPIO_DATA,
+                        regs + GRGPIO_OUTPUT, NULL, regs + GRGPIO_DIR, NULL,
+                        BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+       if (err) {
+               dev_err(&ofdev->dev, "bgpio_init() failed\n");
+               return err;
+       }
+
+       priv->regs = regs;
+       priv->dev = &ofdev->dev;
+
+       gc = &bgc->gc;
+       gc->of_node = np;
+       gc->owner = THIS_MODULE;
+       gc->label = np->full_name;
+       gc->base = -1;
+
+       err = of_property_read_u32(np, "nbits", &prop);
+       if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) {
+               gc->ngpio = GRGPIO_MAX_NGPIO;
+               dev_dbg(&ofdev->dev,
+                       "No or invalid nbits property: assume %d\n", gc->ngpio);
+       } else {
+               gc->ngpio = prop;
+       }
+
+       platform_set_drvdata(ofdev, priv);
+
+       err = gpiochip_add(gc);
+       if (err) {
+               dev_err(&ofdev->dev, "Could not add gpiochip\n");
+               return err;
+       }
+
+       dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d\n",
+                priv->regs, gc->base, gc->ngpio);
+
+       return 0;
+}
+
+static int grgpio_remove(struct platform_device *ofdev)
+{
+       struct grgpio_priv *priv = platform_get_drvdata(ofdev);
+
+       return gpiochip_remove(&priv->bgc.gc);
+}
+
+static struct of_device_id grgpio_match[] = {
+       {.name = "GAISLER_GPIO"},
+       {.name = "01_01a"},
+       {},
+};
+
+MODULE_DEVICE_TABLE(of, grgpio_match);
+
+static struct platform_driver grgpio_driver = {
+       .driver = {
+               .name = "grgpio",
+               .owner = THIS_MODULE,
+               .of_match_table = grgpio_match,
+       },
+       .probe = grgpio_probe,
+       .remove = grgpio_remove,
+};
+module_platform_driver(grgpio_driver);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB.");
+MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO");
+MODULE_LICENSE("GPL");