[media] adv7604: Correct G/S_EDID behaviour

In order to have v4l2-compliance tool pass the G/S_EDID some modifications
where needed in the driver.
In particular, the edid.reserved zone must be blanked.

Based on a patch from Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>,
but reworked it a bit. It should use 'data' (which depends on edid.present)
instead of edid.blocks as the check whether edid data is present.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 47795ff..22e550a 100644 (file)
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -1997,19 +1997,7 @@ static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
        struct adv7604_state *state = to_state(sd);
        u8 *data = NULL;
 
-       if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
-               return -EINVAL;
-       if (edid->blocks == 0)
-               return -EINVAL;
-       if (edid->blocks > 2)
-               return -EINVAL;
-       if (edid->start_block > 1)
-               return -EINVAL;
-       if (edid->start_block == 1)
-               edid->blocks = 1;
-
-       if (edid->blocks > state->edid.blocks)
-               edid->blocks = state->edid.blocks;
+       memset(edid->reserved, 0, sizeof(edid->reserved));
 
        switch (edid->pad) {
        case ADV7604_PAD_HDMI_PORT_A:
@@ -2021,14 +2009,24 @@ static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
                break;
        default:
                return -EINVAL;
-               break;
        }
-       if (!data)
+
+       if (edid->start_block == 0 && edid->blocks == 0) {
+               edid->blocks = data ? state->edid.blocks : 0;
+               return 0;
+       }
+
+       if (data == NULL)
                return -ENODATA;
 
-       memcpy(edid->edid,
-              data + edid->start_block * 128,
-              edid->blocks * 128);
+       if (edid->start_block >= state->edid.blocks)
+               return -EINVAL;
+
+       if (edid->start_block + edid->blocks > state->edid.blocks)
+               edid->blocks = state->edid.blocks - edid->start_block;
+
+       memcpy(edid->edid, data + edid->start_block * 128, edid->blocks * 128);
+
        return 0;
 }
 
@@ -2068,6 +2066,8 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
        int err;
        int i;
 
+       memset(edid->reserved, 0, sizeof(edid->reserved));
+
        if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
                return -EINVAL;
        if (edid->start_block != 0)
@@ -2164,7 +2164,6 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
                return -EIO;
        }
 
-
        /* enable hotplug after 100 ms */
        queue_delayed_work(state->work_queues,
                        &state->delayed_work_enable_hotplug, HZ / 10);