clk: rockchip: rk3399: Fix check patch warnings and checks

- CHECK: spaces preferred around that '*'
- CHECK: spaces preferred around that '/'
- CHECK: space preferred before that '|'
- WARNING: macros should not use a trailing semicolon
- CHECK: Unnecessary parentheses around 'fbdiv <= min_fbdiv'
- CHECK: Unnecessary parentheses around 'parent->id == SCLK_MAC'
- CHECK: Unnecessary parentheses around 'parent->dev == clk->dev'
- WARNING: line over 80 characters
- CHECK: Prefer kernel type 'u8' over 'uint8_t'
- Add proper macro definitions arrangements

Note: there are still line over 80 characters and other warnings but
fixing those making code look unreadable, so I kept it as it is.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>

diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 6c73fc9..69a887f 100644 (file)
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -38,8 +38,8 @@ struct pll_div {
 };
 
 #define RATE_TO_DIV(input_rate, output_rate) \
-       ((input_rate) / (output_rate) - 1);
-#define DIV_TO_RATE(input_rate, div)    ((input_rate) / ((div) + 1))
+       ((input_rate) / (output_rate) - 1)
+#define DIV_TO_RATE(input_rate, div)           ((input_rate) / ((div) + 1))
 
 #define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
        .refdiv = _refdiv,\
@@ -53,15 +53,15 @@ static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2);
 static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1);
 #endif
 
-static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600*MHz, 3, 1, 1);
-static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1);
+static const struct pll_div apll_l_1600_cfg = PLL_DIVISORS(1600 * MHz, 3, 1, 1);
+static const struct pll_div apll_l_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1);
 
 static const struct pll_div *apll_l_cfgs[] = {
        [APLL_L_1600_MHZ] = &apll_l_1600_cfg,
        [APLL_L_600_MHZ] = &apll_l_600_cfg,
 };
 
-static const struct pll_div apll_b_600_cfg = PLL_DIVISORS(600*MHz, 1, 2, 1);
+static const struct pll_div apll_b_600_cfg = PLL_DIVISORS(600 * MHz, 1, 2, 1);
 static const struct pll_div *apll_b_cfgs[] = {
        [APLL_B_600_MHZ] = &apll_b_600_cfg,
 };
@@ -393,7 +393,7 @@ static int pll_para_config(u32 freq_hz, struct pll_div *div)
                fref_khz = ref_khz / refdiv;
 
                fbdiv = vco_khz / fref_khz;
-               if ((fbdiv >= max_fbdiv) || (fbdiv <= min_fbdiv))
+               if (fbdiv >= max_fbdiv || fbdiv <= min_fbdiv)
                        continue;
                diff_khz = vco_khz - fbdiv * fref_khz;
                if (fbdiv + 1 < max_fbdiv && diff_khz > fref_khz / 2) {
@@ -409,7 +409,7 @@ static int pll_para_config(u32 freq_hz, struct pll_div *div)
                div->fbdiv = fbdiv;
        }
 
-       if (best_diff_khz > 4 * (MHz/KHz)) {
+       if (best_diff_khz > 4 * (MHz / KHz)) {
                printf("%s: Failed to match output frequency %u, "
                       "difference is %u Hz,exceed 4MHZ\n", __func__, freq_hz,
                       best_diff_khz * KHz);
@@ -489,28 +489,21 @@ void rk3399_configure_cpu_b(struct rk3399_cru *cru,
 }
 
 #define I2C_CLK_REG_MASK(bus) \
-                       (I2C_DIV_CON_MASK << \
-                       CLK_I2C ##bus## _DIV_CON_SHIFT | \
-                       CLK_I2C_PLL_SEL_MASK << \
-                       CLK_I2C ##bus## _PLL_SEL_SHIFT)
+       (I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT | \
+        CLK_I2C_PLL_SEL_MASK << CLK_I2C ##bus## _PLL_SEL_SHIFT)
 
 #define I2C_CLK_REG_VALUE(bus, clk_div) \
-                             ((clk_div - 1) << \
-                                       CLK_I2C ##bus## _DIV_CON_SHIFT | \
-                             CLK_I2C_PLL_SEL_GPLL << \
-                                       CLK_I2C ##bus## _PLL_SEL_SHIFT)
+       ((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT | \
+        CLK_I2C_PLL_SEL_GPLL << CLK_I2C ##bus## _PLL_SEL_SHIFT)
 
 #define I2C_CLK_DIV_VALUE(con, bus) \
-                       (con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & \
-                               I2C_DIV_CON_MASK;
+       ((con >> CLK_I2C ##bus## _DIV_CON_SHIFT) & I2C_DIV_CON_MASK)
 
 #define I2C_PMUCLK_REG_MASK(bus) \
-                       (I2C_DIV_CON_MASK << \
-                        CLK_I2C ##bus## _DIV_CON_SHIFT)
+       (I2C_DIV_CON_MASK << CLK_I2C ##bus## _DIV_CON_SHIFT)
 
 #define I2C_PMUCLK_REG_VALUE(bus, clk_div) \
-                               ((clk_div - 1) << \
-                               CLK_I2C ##bus## _DIV_CON_SHIFT)
+       ((clk_div - 1) << CLK_I2C ##bus## _DIV_CON_SHIFT)
 
 static ulong rk3399_i2c_get_clk(struct rk3399_cru *cru, ulong clk_id)
 {
@@ -597,9 +590,9 @@ static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
  */
 
 struct spi_clkreg {
-       uint8_t reg;  /* CLKSEL_CON[reg] register in CRU */
-       uint8_t div_shift;
-       uint8_t sel_shift;
+       u8 reg;  /* CLKSEL_CON[reg] register in CRU */
+       u8 div_shift;
+       u8 sel_shift;
 };
 
 /*
@@ -678,7 +671,7 @@ static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz)
 static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
 {
        struct pll_div vpll_config = {0};
-       int aclk_vop = 198*MHz;
+       int aclk_vop = 198 * MHz;
        void *aclkreg_addr, *dclkreg_addr;
        u32 div;
 
@@ -710,7 +703,7 @@ static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz)
        rkclk_set_pll(&cru->vpll_con[0], &vpll_config);
 
        rk_clrsetreg(dclkreg_addr,
-                    DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK|
+                    DCLK_VOP_DCLK_SEL_MASK | DCLK_VOP_PLL_SEL_MASK |
                     DCLK_VOP_DIV_CON_MASK,
                     DCLK_VOP_DCLK_SEL_DIVOUT << DCLK_VOP_DCLK_SEL_SHIFT |
                     DCLK_VOP_PLL_SEL_VPLL << DCLK_VOP_PLL_SEL_SHIFT |
@@ -750,7 +743,7 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,
                                ulong clk_id, ulong set_rate)
 {
        int src_clk_div;
-       int aclk_emmc = 198*MHz;
+       int aclk_emmc = 198 * MHz;
 
        switch (clk_id) {
        case HCLK_SDMMC:
@@ -776,7 +769,7 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,
                break;
        case SCLK_EMMC:
                /* Select aclk_emmc source from GPLL */
-               src_clk_div = DIV_ROUND_UP(GPLL_HZ , aclk_emmc);
+               src_clk_div = DIV_ROUND_UP(GPLL_HZ, aclk_emmc);
                assert(src_clk_div - 1 < 32);
 
                rk_clrsetreg(&cru->clksel_con[21],
@@ -834,23 +827,23 @@ static ulong rk3399_ddr_set_clk(struct rk3399_cru *cru,
 
        /*  clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
        switch (set_rate) {
-       case 200*MHz:
+       case 200 * MHz:
                dpll_cfg = (struct pll_div)
                {.refdiv = 1, .fbdiv = 50, .postdiv1 = 6, .postdiv2 = 1};
                break;
-       case 300*MHz:
+       case 300 * MHz:
                dpll_cfg = (struct pll_div)
                {.refdiv = 2, .fbdiv = 100, .postdiv1 = 4, .postdiv2 = 1};
                break;
-       case 666*MHz:
+       case 666 * MHz:
                dpll_cfg = (struct pll_div)
                {.refdiv = 2, .fbdiv = 111, .postdiv1 = 2, .postdiv2 = 1};
                break;
-       case 800*MHz:
+       case 800 * MHz:
                dpll_cfg = (struct pll_div)
                {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
                break;
-       case 933*MHz:
+       case 933 * MHz:
                dpll_cfg = (struct pll_div)
                {.refdiv = 1, .fbdiv = 116, .postdiv1 = 3, .postdiv2 = 1};
                break;
@@ -916,7 +909,6 @@ static ulong rk3399_clk_get_rate(struct clk *clk)
        case SCLK_UART2:
        case SCLK_UART3:
                return 24000000;
-               break;
        case PCLK_HDMI_CTRL:
                break;
        case DCLK_VOP0:
@@ -1014,7 +1006,8 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
        return ret;
 }
 
-static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *parent)
+static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk,
+                                                struct clk *parent)
 {
        struct rk3399_clk_priv *priv = dev_get_priv(clk->dev);
        const char *clock_output_name;
@@ -1024,7 +1017,7 @@ static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *pa
         * If the requested parent is in the same clock-controller and
         * the id is SCLK_MAC ("clk_gmac"), switch to the internal clock.
         */
-       if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC)) {
+       if (parent->dev == clk->dev && parent->id == SCLK_MAC) {
                debug("%s: switching RGMII to SCLK_MAC\n", __func__);
                rk_clrreg(&priv->cru->clksel_con[19], BIT(4));
                return 0;
@@ -1049,7 +1042,8 @@ static int __maybe_unused rk3399_gmac_set_parent(struct clk *clk, struct clk *pa
        return -EINVAL;
 }
 
-static int __maybe_unused rk3399_clk_set_parent(struct clk *clk, struct clk *parent)
+static int __maybe_unused rk3399_clk_set_parent(struct clk *clk,
+                                               struct clk *parent)
 {
        switch (clk->id) {
        case SCLK_RMII_SRC: