pcmcia: use dev_printk and dev_dbg in yenta_socket

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h
index a234ce1..5554015 100644 (file)
--- a/drivers/pcmcia/o2micro.h
+++ b/drivers/pcmcia/o2micro.h
@@ -140,7 +140,8 @@ static int o2micro_override(struct yenta_socket *socket)
                a = config_readb(socket, O2_RESERVED1);
                b = config_readb(socket, O2_RESERVED2);
 
-               printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "O2: res at 0x94/0xD4: %02x/%02x\n", a, b);
 
                switch (socket->dev->device) {
                /*
@@ -153,7 +154,9 @@ static int o2micro_override(struct yenta_socket *socket)
                case PCI_DEVICE_ID_O2_6812:
                case PCI_DEVICE_ID_O2_6832:
                case PCI_DEVICE_ID_O2_6836:
-                       printk(KERN_INFO "Yenta O2: old bridge, disabling read prefetch/write burst\n");
+                       dev_printk(KERN_INFO, &socket->dev->dev,
+                                  "Yenta O2: old bridge, disabling read "
+                                  "prefetch/write burst\n");
                        config_writeb(socket, O2_RESERVED1,
                                      a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST));
                        config_writeb(socket, O2_RESERVED2,
@@ -161,7 +164,8 @@ static int o2micro_override(struct yenta_socket *socket)
                        break;
 
                default:
-                       printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n");
+                       dev_printk(KERN_INFO , &socket->dev->dev,
+                                  "O2: enabling read prefetch/write burst\n");
                        config_writeb(socket, O2_RESERVED1,
                                      a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST);
                        config_writeb(socket, O2_RESERVED2,

diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 129db7b..aaa7022 100644 (file)
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -339,8 +339,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 
        mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
        devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
-       printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
-              pci_name(socket->dev), mfunc, devctl);
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
 
        /* make sure PCI interrupts are enabled before probing */
        ti_init(socket);
@@ -354,8 +354,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
         * We're here which means PCI interrupts are _not_ delivered. try to
         * find the right setting (all serial or parallel)
         */
-       printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
-              pci_name(socket->dev));
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "TI: probing PCI interrupt failed, trying to fix\n");
 
        /* for serial PCI make sure MFUNC3 is set to IRQSER */
        if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -379,8 +379,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 
                                pci_irq_status = yenta_probe_cb_irq(socket);
                                if (pci_irq_status == 1) {
-                                       printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts ok\n",
-                                              pci_name(socket->dev));
+                                       dev_printk(KERN_INFO, &socket->dev->dev,
+                                           "TI: all-serial interrupts ok\n");
                                        mfunc_old = mfunc;
                                        goto out;
                                }
@@ -395,8 +395,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
                }
 
                /* serial PCI interrupts not working fall back to parallel */
-               printk(KERN_INFO "Yenta TI: socket %s falling back to parallel PCI interrupts\n",
-                      pci_name(socket->dev));
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "TI: falling back to parallel PCI interrupts\n");
                devctl &= ~TI113X_DCR_IMODE_MASK;
                devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
                config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
@@ -427,8 +427,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
        pci_irq_status = yenta_probe_cb_irq(socket);
        if (pci_irq_status == 1) {
                mfunc_old = mfunc;
-               printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
-                      pci_name(socket->dev));
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "TI: parallel PCI interrupts ok\n");
        } else {
                /* not working, back to old value */
                mfunc = mfunc_old;
@@ -440,8 +440,9 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
 out:
        if (pci_irq_status < 1) {
                socket->cb_irq = 0;
-               printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
-                      pci_name(socket->dev));
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "Yenta TI: no PCI interrupts. Fish. "
+                          "Please report.\n");
        }
 }
 
@@ -513,8 +514,9 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 
        mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
        devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
-       printk(KERN_INFO "Yenta TI: socket %s, mfunc 0x%08x, devctl 0x%02x\n",
-              pci_name(socket->dev), mfunc, devctl);
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "TI: mfunc 0x%08x, devctl 0x%02x\n",
+                  mfunc, devctl);
 
        /* if IRQs are configured as tied, align irq of func1 with func0 */
        sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
@@ -533,9 +535,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
         * We're here which means PCI interrupts are _not_ delivered. try to
         * find the right setting
         */
-       printk(KERN_INFO "Yenta TI: socket %s probing PCI interrupt failed, trying to fix\n",
-              pci_name(socket->dev));
-
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "TI: probing PCI interrupt failed, trying to fix\n");
 
        /* if all serial: set INTRTIE, probe again */
        if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
@@ -544,8 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
                if (ti12xx_tie_interrupts(socket, &old_irq)) {
                        pci_irq_status = yenta_probe_cb_irq(socket);
                        if (pci_irq_status == 1) {
-                               printk(KERN_INFO "Yenta TI: socket %s all-serial interrupts, tied ok\n",
-                                      pci_name(socket->dev));
+                               dev_printk(KERN_INFO, &socket->dev->dev,
+                                       "TI: all-serial interrupts, tied ok\n");
                                goto out;
                        }
 
@@ -582,8 +583,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 
                        pci_irq_status = yenta_probe_cb_irq(socket);
                        if (pci_irq_status == 1) {
-                               printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts ok\n",
-                                      pci_name(socket->dev));
+                               dev_printk(KERN_INFO, &socket->dev->dev,
+                                          "TI: parallel PCI interrupts ok\n");
                                goto out;
                        }
 
@@ -593,13 +594,13 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
                        if (pci_irq_status == -1)
                                goto out;
                }
-               
+
                /* still nothing: set INTRTIE */
                if (ti12xx_tie_interrupts(socket, &old_irq)) {
                        pci_irq_status = yenta_probe_cb_irq(socket);
                        if (pci_irq_status == 1) {
-                               printk(KERN_INFO "Yenta TI: socket %s parallel PCI interrupts, tied ok\n",
-                                      pci_name(socket->dev));
+                               dev_printk(KERN_INFO, &socket->dev->dev,
+                                   "TI: parallel PCI interrupts, tied ok\n");
                                goto out;
                        }
 
@@ -610,8 +611,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
 out:
        if (pci_irq_status < 1) {
                socket->cb_irq = 0;
-               printk(KERN_INFO "Yenta TI: socket %s no PCI interrupts. Fish. Please report.\n",
-                      pci_name(socket->dev));
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "TI: no PCI interrupts. Fish. Please report.\n");
        }
 }
 
@@ -815,11 +816,13 @@ static int ti12xx_override(struct yenta_socket *socket)
        /* make sure that memory burst is active */
        val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
        if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
-               printk(KERN_INFO "Yenta: Disabling CLKRUN feature\n");
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "Disabling CLKRUN feature\n");
                val |= TI113X_SCR_KEEPCLK;
        }
        if (!(val & TI122X_SCR_MRBURSTUP)) {
-               printk(KERN_INFO "Yenta: Enabling burst memory read transactions\n");
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "Enabling burst memory read transactions\n");
                val |= TI122X_SCR_MRBURSTUP;
        }
        if (val_orig != val)
@@ -830,10 +833,12 @@ static int ti12xx_override(struct yenta_socket *socket)
         * CSC interrupts to PCI rather than INTVAL.
         */
        val = config_readb(socket, TI1250_DIAGNOSTIC);
-       printk(KERN_INFO "Yenta: Using %s to route CSC interrupts to PCI\n",
-               (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
-       printk(KERN_INFO "Yenta: Routing CardBus interrupts to %s\n",
-               (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "Using %s to route CSC interrupts to PCI\n",
+                  (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "Routing CardBus interrupts to %s\n",
+                  (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
 
        /* do irqrouting, depending on function */
        if (PCI_FUNC(socket->dev->devfn) == 0)
@@ -858,8 +863,9 @@ static int ti1250_override(struct yenta_socket *socket)
                diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
 
        if (diag != old) {
-               printk(KERN_INFO "Yenta: adjusting diagnostic: %02x -> %02x\n",
-                       old, diag);
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "adjusting diagnostic: %02x -> %02x\n",
+                          old, diag);
                config_writeb(socket, TI1250_DIAGNOSTIC, diag);
        }
 
@@ -924,7 +930,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
                /* default to clear TLTEnable bit, old behaviour */
                test_c9 &= ~ENE_TEST_C9_TLTENABLE;
 
-       printk(KERN_INFO "yenta EnE: chaning testregister 0xC9, %02x -> %02x\n", old_c9, test_c9);
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+                  old_c9, test_c9);
        config_writeb(socket, ENE_TEST_C9, test_c9);
 }
 

diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 0ab1fb6..3ecd7c9 100644 (file)
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -38,11 +38,7 @@ static int pwr_irqs_off;
 module_param(pwr_irqs_off, bool, 0644);
 MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
 
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
+#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
 
 /* Don't ask.. */
 #define to_cycles(ns)  ((ns)/120)
@@ -69,13 +65,13 @@ MODULE_PARM_DESC (override_bios, "yenta ignore bios resource allocation");
 static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg)
 {
        u32 val = readl(socket->base + reg);
-       debug("%p %04x %08x\n", socket, reg, val);
+       debug("%04x %08x\n", socket, reg, val);
        return val;
 }
 
 static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val)
 {
-       debug("%p %04x %08x\n", socket, reg, val);
+       debug("%04x %08x\n", socket, reg, val);
        writel(val, socket->base + reg);
        readl(socket->base + reg); /* avoid problems with PCI write posting */
 }
@@ -84,7 +80,7 @@ static inline u8 config_readb(struct yenta_socket *socket, unsigned offset)
 {
        u8 val;
        pci_read_config_byte(socket->dev, offset, &val);
-       debug("%p %04x %02x\n", socket, offset, val);
+       debug("%04x %02x\n", socket, offset, val);
        return val;
 }
 
@@ -92,7 +88,7 @@ static inline u16 config_readw(struct yenta_socket *socket, unsigned offset)
 {
        u16 val;
        pci_read_config_word(socket->dev, offset, &val);
-       debug("%p %04x %04x\n", socket, offset, val);
+       debug("%04x %04x\n", socket, offset, val);
        return val;
 }
 
@@ -100,32 +96,32 @@ static inline u32 config_readl(struct yenta_socket *socket, unsigned offset)
 {
        u32 val;
        pci_read_config_dword(socket->dev, offset, &val);
-       debug("%p %04x %08x\n", socket, offset, val);
+       debug("%04x %08x\n", socket, offset, val);
        return val;
 }
 
 static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val)
 {
-       debug("%p %04x %02x\n", socket, offset, val);
+       debug("%04x %02x\n", socket, offset, val);
        pci_write_config_byte(socket->dev, offset, val);
 }
 
 static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val)
 {
-       debug("%p %04x %04x\n", socket, offset, val);
+       debug("%04x %04x\n", socket, offset, val);
        pci_write_config_word(socket->dev, offset, val);
 }
 
 static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val)
 {
-       debug("%p %04x %08x\n", socket, offset, val);
+       debug("%04x %08x\n", socket, offset, val);
        pci_write_config_dword(socket->dev, offset, val);
 }
 
 static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg)
 {
        u8 val = readb(socket->base + 0x800 + reg);
-       debug("%p %04x %02x\n", socket, reg, val);
+       debug("%04x %02x\n", socket, reg, val);
        return val;
 }
 
@@ -134,20 +130,20 @@ static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg)
        u16 val;
        val = readb(socket->base + 0x800 + reg);
        val |= readb(socket->base + 0x800 + reg + 1) << 8;
-       debug("%p %04x %04x\n", socket, reg, val);
+       debug("%04x %04x\n", socket, reg, val);
        return val;
 }
 
 static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val)
 {
-       debug("%p %04x %02x\n", socket, reg, val);
+       debug("%04x %02x\n", socket, reg, val);
        writeb(val, socket->base + 0x800 + reg);
        readb(socket->base + 0x800 + reg); /* PCI write posting... */
 }
 
 static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val)
 {
-       debug("%p %04x %04x\n", socket, reg, val);
+       debug("%04x %04x\n", socket, reg, val);
        writeb(val, socket->base + 0x800 + reg);
        writeb(val >> 8, socket->base + 0x800 + reg + 1);
 
@@ -207,7 +203,7 @@ static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value)
 
 
        if (state & CB_CBCARD) {
-               val |= SS_CARDBUS;      
+               val |= SS_CARDBUS;
                val |= (state & CB_CARDSTS) ? SS_STSCHG : 0;
                val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT;
                val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0;
@@ -650,8 +646,10 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
                root = pci_find_parent_resource(socket->dev, res);
                if (root && (request_resource(root, res) == 0))
                        return 0;
-               printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n",
-                               pci_name(socket->dev), nr);
+               dev_printk(KERN_INFO, &socket->dev->dev,
+                          "Preassigned resource %d busy or not available, "
+                          "reconfiguring...\n",
+                          nr);
        }
 
        if (type & IORESOURCE_IO) {
@@ -674,8 +672,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
                        return 1;
        }
 
-       printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n",
-              pci_name(socket->dev), type);
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "no resource of type %x available, trying to continue...\n",
+                  type);
        res->start = res->end = res->flags = 0;
        return 0;
 }
@@ -923,7 +922,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
        socket->probe_status = 0;
 
        if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
-               printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n");
+               dev_printk(KERN_WARNING, &socket->dev->dev,
+                          "request_irq() in yenta_probe_cb_irq() failed!\n");
                return -1;
        }
 
@@ -960,8 +960,9 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
        else
                socket->socket.irq_mask = 0;
 
-       printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n",
-              socket->socket.irq_mask, socket->cb_irq);
+       dev_printk(KERN_INFO, &socket->dev->dev,
+                  "ISA IRQ mask 0x%04x, PCI irq %d\n",
+                  socket->socket.irq_mask, socket->cb_irq);
 }
 
 /*
@@ -1051,8 +1052,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 
        /* Show that the wanted subordinate number is not possible: */
        if (cardbus_bridge->subordinate > upper_limit)
-               printk(KERN_WARNING "Yenta: Upper limit for fixing this "
-                       "bridge's parent bridge: #%02x\n", upper_limit);
+               dev_printk(KERN_WARNING, &cardbus_bridge->dev,
+                          "Upper limit for fixing this "
+                          "bridge's parent bridge: #%02x\n", upper_limit);
 
        /* If we have room to increase the bridge's subordinate number, */
        if (bridge_to_fix->subordinate < upper_limit) {
@@ -1061,10 +1063,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
                unsigned char subordinate_to_assign =
                        min(cardbus_bridge->subordinate, upper_limit);
 
-               printk(KERN_INFO "Yenta: Raising subordinate bus# of parent "
-                       "bus (#%02x) from #%02x to #%02x\n",
-                       bridge_to_fix->number,
-                       bridge_to_fix->subordinate, subordinate_to_assign);
+               dev_printk(KERN_INFO, &bridge_to_fix->dev,
+                          "Raising subordinate bus# of parent "
+                          "bus (#%02x) from #%02x to #%02x\n",
+                          bridge_to_fix->number,
+                          bridge_to_fix->subordinate, subordinate_to_assign);
 
                /* Save the new subordinate in the bus struct of the bridge */
                bridge_to_fix->subordinate = subordinate_to_assign;
@@ -1091,8 +1094,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
         * Bail out if so.
         */
        if (!dev->subordinate) {
-               printk(KERN_ERR "Yenta: no bus associated with %s! "
-                       "(try 'pci=assign-busses')\n", pci_name(dev));
+               dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
+                          "(try 'pci=assign-busses')\n");
                return -ENODEV;
        }
 
@@ -1127,7 +1130,7 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
                goto disable;
 
        if (!pci_resource_start(dev, 0)) {
-               printk(KERN_ERR "No cardbus resource!\n");
+               dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
                ret = -ENODEV;
                goto release;
        }
@@ -1146,8 +1149,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
         * report the subsystem vendor and device for help debugging
         * the irq stuff...
         */
-       printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n",
-               pci_name(dev), dev->subsystem_vendor, dev->subsystem_device);
+       dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
+                  dev->subsystem_vendor, dev->subsystem_device);
 
        yenta_config_init(socket);
 
@@ -1179,8 +1182,12 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
                socket->poll_timer.data = (unsigned long)socket;
                socket->poll_timer.expires = jiffies + HZ;
                add_timer(&socket->poll_timer);
-               printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n"
-                      KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
+               dev_printk(KERN_INFO, &dev->dev,
+                          "no PCI IRQ, CardBus support disabled for this "
+                          "socket.\n");
+               dev_printk(KERN_INFO, &dev->dev,
+                          "check your BIOS CardBus, BIOS IRQ or ACPI "
+                          "settings.\n");
        } else {
                socket->socket.features |= SS_CAP_CARDBUS;
        }
@@ -1188,7 +1195,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
        /* Figure out what the dang thing can do for the PCMCIA layer... */
        yenta_interrogate(socket);
        yenta_get_socket_capabilities(socket, isa_interrupts);
-       printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+       dev_printk(KERN_INFO, &dev->dev,
+                  "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
 
        yenta_fixup_parent_bridge(dev->subordinate);