net: marvell10g: report firmware version
authorRussell King <rmk+kernel@armlinux.org.uk>
Tue, 14 Apr 2020 19:49:03 +0000 (20:49 +0100)
committerDavid S. Miller <davem@davemloft.net>
Tue, 14 Apr 2020 23:48:09 +0000 (16:48 -0700)
Report the firmware version when probing the PHY to allow issues
attributable to firmware to be diagnosed.

Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/marvell10g.c

index 7621bad..748532d 100644 (file)
@@ -33,6 +33,8 @@
 #define MV_PHY_ALASKA_NBT_QUIRK_REV    (MARVELL_PHY_ID_88X3310 | 0xa)
 
 enum {
+       MV_PMA_FW_VER0          = 0xc011,
+       MV_PMA_FW_VER1          = 0xc012,
        MV_PMA_BOOT             = 0xc050,
        MV_PMA_BOOT_FATAL       = BIT(0),
 
@@ -83,6 +85,8 @@ enum {
 };
 
 struct mv3310_priv {
+       u32 firmware_ver;
+
        struct device *hwmon_dev;
        char *hwmon_name;
 };
@@ -355,6 +359,22 @@ static int mv3310_probe(struct phy_device *phydev)
 
        dev_set_drvdata(&phydev->mdio.dev, priv);
 
+       ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
+       if (ret < 0)
+               return ret;
+
+       priv->firmware_ver = ret << 16;
+
+       ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER1);
+       if (ret < 0)
+               return ret;
+
+       priv->firmware_ver |= ret;
+
+       phydev_info(phydev, "Firmware version %u.%u.%u.%u\n",
+                   priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
+                   (priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
+
        /* Powering down the port when not in use saves about 600mW */
        ret = mv3310_power_down(phydev);
        if (ret)