ARM: rmobile: Enable I2C EEPROM support on R-Car Gen3

Enable support for I2C EEPROM driver on supported Renesas R-Car Gen3 boards.
This is useful for accessing the board ID EEPROM.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

diff --git a/configs/r8a77990_ebisu_defconfig b/configs/r8a77990_ebisu_defconfig
index 15743c1..13ca814 100644 (file)
--- a/configs/r8a77990_ebisu_defconfig
+++ b/configs/r8a77990_ebisu_defconfig
@@ -50,6 +50,13 @@ CONFIG_DFU_SF=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x70
+CONFIG_SYS_I2C_EEPROM_BUS=7
+CONFIG_SYS_EEPROM_SIZE=128
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=7
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y

diff --git a/configs/rcar3_salvator-x_defconfig b/configs/rcar3_salvator-x_defconfig
index efd6ca2..ef9775a 100644 (file)
--- a/configs/rcar3_salvator-x_defconfig
+++ b/configs/rcar3_salvator-x_defconfig
@@ -52,6 +52,13 @@ CONFIG_DFU_SF=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x70
+CONFIG_SYS_I2C_EEPROM_BUS=7
+CONFIG_SYS_EEPROM_SIZE=128
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=7
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y

diff --git a/configs/rcar3_ulcb_defconfig b/configs/rcar3_ulcb_defconfig
index a857e5b..cfec485 100644 (file)
--- a/configs/rcar3_ulcb_defconfig
+++ b/configs/rcar3_ulcb_defconfig
@@ -52,6 +52,13 @@ CONFIG_DFU_SF=y
 CONFIG_RCAR_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_RCAR_IIC=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x70
+CONFIG_SYS_I2C_EEPROM_BUS=7
+CONFIG_SYS_EEPROM_SIZE=128
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=7
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS400_SUPPORT=y