--- /dev/null
+/*
+ * arch/arm/boot/dts/amlogic/mesontl1.dtsi
+ *
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-tl1-gpio.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/meson_rc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pwm/meson.h>
+#include <dt-bindings/clock/amlogic,tl1-clkc.h>
+#include <dt-bindings/clock/amlogic,tl1-audio-clk.h>
+#include "mesong12a-bifrost.dtsi"
+#include <dt-bindings/iio/adc/amlogic-saradc.h>
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus:cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #cooling-cells = <2>;/* min followed by max */
+ CPU0:cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ //timer=<&timer_a>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+
+ CPU1:cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x1>;
+ //timer=<&timer_b>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+
+ CPU2:cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x2>;
+ //timer=<&timer_c>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+
+ CPU3:cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x3>;
+ //timer=<&timer_d>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 0xff01>,
+ <GIC_PPI 14 0xff01>,
+ <GIC_PPI 11 0xff01>,
+ <GIC_PPI 10 0xff01>;
+ };
+
+ timer_bc {
+ compatible = "arm, meson-bc-timer";
+ reg = <0xffd0f190 0x4 0xffd0f194 0x4>;
+ timer_name = "Meson TimerF";
+ clockevent-rating =<300>;
+ clockevent-shift =<20>;
+ clockevent-features =<0x23>;
+ interrupts = <0 60 1>;
+ bit_enable =<16>;
+ bit_mode =<12>;
+ bit_resolution =<0>;
+ };
+
+ arm_pmu {
+ compatible = "arm,cortex-a15-pmu";
+ /* clusterb-enabled; */
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff634680 0x4>;
+ cpumasks = <0xf>;
+ /* default 10ms */
+ relax-timer-ns = <10000000>;
+ /* default 10000us */
+ max-wait-cnt = <10000>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xffc01000 0x1000>,
+ <0xffc02000 0x0100>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ scpi_clocks {
+ compatible = "arm, scpi-clks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm, scpi-clk-indexed";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+ };
+
+ secmon {
+ compatible = "amlogic, secmon";
+ memory-region = <&secmon_reserved>;
+ in_base_func = <0x82000020>;
+ out_base_func = <0x82000021>;
+ reserve_mem_size = <0x00300000>;
+ };
+
+ securitykey {
+ compatible = "amlogic, securitykey";
+ status = "okay";
+ storage_query = <0x82000060>;
+ storage_read = <0x82000061>;
+ storage_write = <0x82000062>;
+ storage_tell = <0x82000063>;
+ storage_verify = <0x82000064>;
+ storage_status = <0x82000065>;
+ storage_list = <0x82000067>;
+ storage_remove = <0x82000068>;
+ storage_in_func = <0x82000023>;
+ storage_out_func = <0x82000024>;
+ storage_block_func = <0x82000025>;
+ storage_size_func = <0x82000027>;
+ storage_set_enctype = <0x8200006A>;
+ storage_get_enctype = <0x8200006B>;
+ storage_version = <0x8200006C>;
+ };
+
+ mailbox: mhu@ff63c400 {
+ status = "disabled";
+ compatible = "amlogic, meson_mhu";
+ reg = <0xff63c400 0x4c>, /* MHU registers */
+ <0xfffd7000 0x800>; /* Payload area */
+ interrupts = <0 209 1>, /* low priority interrupt */
+ <0 210 1>; /* high priority interrupt */
+ #mbox-cells = <1>;
+ mbox-names = "cpu_to_scp_low", "cpu_to_scp_high";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ };
+
+ cpu_iomap {
+ compatible = "amlogic, iomap";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ io_cbus_base {
+ reg = <0xffd00000 0x101000>;
+ };
+ io_apb_base {
+ reg = <0xffe01000 0x19f000>;
+ };
+ io_aobus_base {
+ reg = <0xff800000 0x100000>;
+ };
+ io_vapb_base {
+ reg = <0xff900000 0x200000>;
+ };
+ io_hiu_base {
+ reg = <0xff63c000 0x2000>;
+ };
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ meson_suspend: pm {
+ compatible = "amlogic, pm";
+ /*gxbaby-suspend;*/
+ status = "okay";
+ reg = <0xff8000a8 0x4>,
+ <0xff80023c 0x4>;
+ };
+
+ cpuinfo {
+ compatible = "amlogic, cpuinfo";
+ status = "okay";
+ cpuinfo_cmd = <0x82000044>;
+ };
+
+ rtc{
+ compatible = "amlogic, aml_vrtc";
+ alarm_reg_addr = <0xff8000a8>;
+ timer_e_addr = <0xffd0f188>;
+ init_date = "2018/01/01";
+ status = "disabled";
+ };
+
+ reboot {
+ compatible = "amlogic,reboot";
+ sys_reset = <0x84000009>;
+ sys_poweroff = <0x84000008>;
+ };
+
+ ram-dump {
+ compatible = "amlogic, ram_dump";
+ status = "okay";
+ reg = <0xFF6345E0 4>;
+ reg-names = "PREG_STICKY_REG8";
+ };
+
+ securitykey {
+ compatible = "amlogic, securitykey";
+ status = "disabled";
+ storage_query = <0x82000060>;
+ storage_read = <0x82000061>;
+ storage_write = <0x82000062>;
+ storage_tell = <0x82000063>;
+ storage_verify = <0x82000064>;
+ storage_status = <0x82000065>;
+ storage_list = <0x82000067>;
+ storage_remove = <0x82000068>;
+ storage_in_func = <0x82000023>;
+ storage_out_func = <0x82000024>;
+ storage_block_func = <0x82000025>;
+ storage_size_func = <0x82000027>;
+ storage_set_enctype = <0x8200006A>;
+ storage_get_enctype = <0x8200006B>;
+ storage_version = <0x8200006C>;
+ };
+
+ vpu {
+ compatible = "amlogic, vpu-tl1";
+ status = "okay";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_VPU_INTR>,
+ <&clkc CLKID_VPU_P0_COMP>,
+ <&clkc CLKID_VPU_P1_COMP>,
+ <&clkc CLKID_VPU_MUX>;
+ clock-names = "vapb_clk",
+ "vpu_intr_gate",
+ "vpu_clk0",
+ "vpu_clk1",
+ "vpu_clk";
+ clk_level = <7>;
+ /* 0: 100.0M 1: 166.7M 2: 200.0M 3: 250.0M */
+ /* 4: 333.3M 5: 400.0M 6: 500.0M 7: 666.7M */
+ };
+
+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic, g12a-eth-dwmac","snps,dwmac";
+ reg = <0xff3f0000 0x10000
+ 0xff634540 0x8
+ 0xff64c000 0xa0>;
+ reg-names = "eth_base", "eth_cfg", "eth_pll";
+ interrupts = <0 8 1>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ clocks = <&clkc CLKID_ETH_CORE>;
+ clock-names = "ethclk81";
+ pll_val = <0x9c0040a 0x927e0000 0xac5f49e5>;
+ analog_val = <0x20200000 0x0000c000 0x00000023>;
+ };
+
+ pinctrl_aobus: pinctrl@ff800014 {
+ compatible = "amlogic,meson-tl1-aobus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio_ao: ao-bank@ff800014 {
+ reg = <0xff800014 0x8>,
+ <0xff800024 0x14>,
+ <0xff80001c 0x8>;
+ reg-names = "mux", "gpio", "drive-strength";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ aoceca_mux:aoceca_mux {
+ mux {
+ groups = "cec_ao_a";
+ function = "cec_ao";
+ };
+ };
+
+ aocecb_mux:aocecb_mux {
+ mux {
+ groups = "cec_ao_b";
+ function = "cec_ao";
+ };
+ };
+ };
+
+ pinctrl_periphs: pinctrl@ff6346c0 {
+ compatible = "amlogic,meson-tl1-periphs-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@ff6346c0 {
+ reg = <0xff6346c0 0x40>,
+ <0xff6344e8 0x18>,
+ <0xff634520 0x18>,
+ <0xff634440 0x4c>,
+ <0xff634740 0x1c>;
+ reg-names = "mux",
+ "pull",
+ "pull-enable",
+ "gpio",
+ "drive-strength";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+
+ hdmirx_a_mux:hdmirx_a_mux {
+ mux {
+ groups = "hdmirx_a_hpd", "hdmirx_a_det",
+ "hdmirx_a_sda", "hdmirx_a_sck";
+ function = "hdmirx_a";
+ };
+ };
+
+ hdmirx_b_mux:hdmirx_b_mux {
+ mux {
+ groups = "hdmirx_b_hpd", "hdmirx_b_det",
+ "hdmirx_b_sda", "hdmirx_b_sck";
+ function = "hdmirx_b";
+ };
+ };
+
+ hdmirx_c_mux:hdmirx_c_mux {
+ mux {
+ groups = "hdmirx_c_hpd", "hdmirx_c_det",
+ "hdmirx_c_sda", "hdmirx_c_sck";
+ function = "hdmirx_c";
+ };
+ };
+
+ };
+
+ dwc3: dwc3@ff500000 {
+ compatible = "synopsys, dwc3";
+ status = "disabled";
+ reg = <0xff500000 0x100000>;
+ interrupts = <0 30 4>;
+ usb-phy = <&usb2_phy_v2>, <&usb3_phy_v2>;
+ cpu-type = "gxl";
+ clock-src = "usb3.0";
+ clocks = <&clkc CLKID_USB_GENERAL>;
+ clock-names = "dwc_general";
+ };
+
+ usb2_phy_v2: usb2phy@ffe09000 {
+ compatible = "amlogic, amlogic-new-usb2-v2";
+ status = "disabled";
+ reg = <0xffe09000 0x80
+ 0xffd01008 0x100
+ 0xff636000 0x2000
+ 0xff63a000 0x2000
+ 0xff658000 0x2000>;
+ pll-setting-1 = <0x09400414>;
+ pll-setting-2 = <0x927E0000>;
+ pll-setting-3 = <0xac5f69e5>;
+ pll-setting-4 = <0xfe18>;
+ pll-setting-5 = <0x8000fff>;
+ pll-setting-6 = <0x78000>;
+ pll-setting-7 = <0xe0004>;
+ pll-setting-8 = <0xe000c>;
+ version = <1>;
+ };
+
+ usb3_phy_v2: usb3phy@ffe09080 {
+ compatible = "amlogic, amlogic-new-usb3-v2";
+ status = "disabled";
+ reg = <0xffe09080 0x20>;
+ phy-reg = <0xff646000>;
+ phy-reg-size = <0x2000>;
+ usb2-phy-reg = <0xffe09000>;
+ usb2-phy-reg-size = <0x80>;
+ interrupts = <0 16 4>;
+ };
+
+ dwc2_a: dwc2_a@ff400000 {
+ compatible = "amlogic, dwc2";
+ status = "disabled";
+ device_name = "dwc2_a";
+ reg = <0xff400000 0x40000>;
+ interrupts = <0 31 4>;
+ pl-periph-id = <0>; /** lm name */
+ clock-src = "usb0"; /** clock src */
+ port-id = <0>; /** ref to mach/usb.h */
+ port-type = <2>; /** 0: otg, 1: host, 2: slave */
+ port-speed = <0>; /** 0: default, high, 1: full */
+ port-config = <0>; /** 0: default */
+ /*0:default,1:single,2:incr,3:incr4,4:incr8,5:incr16,6:disable*/
+ port-dma = <0>;
+ port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
+ usb-fifo = <728>;
+ cpu-type = "v2";
+ phy-reg = <0xffe09000>;
+ phy-reg-size = <0xa0>;
+ /** phy-interface: 0x0: amlogic-v1 phy, 0x1: synopsys phy **/
+ /** 0x2: amlogic-v2 phy **/
+ phy-interface = <0x2>;
+ clocks = <&clkc CLKID_USB_GENERAL
+ &clkc CLKID_USB1_TO_DDR>;
+ clock-names = "usb_general",
+ "usb1";
+ };
+
+ wdt: watchdog@0xffd0f0d0 {
+ compatible = "amlogic, meson-wdt";
+ status = "disabled";
+ default_timeout=<10>;
+ reset_watchdog_method=<1>; /* 0:sysfs,1:kernel */
+ reset_watchdog_time=<2>;
+ shutdown_timeout=<10>;
+ firmware_timeout=<6>;
+ suspend_timeout=<6>;
+ reg = <0xffd0f0d0 0x10>;
+ clock-names = "xtal";
+ clocks = <&xtal>;
+ };
+
+ jtag {
+ compatible = "amlogic, jtag";
+ status = "okay";
+ select = "disable"; /* disable/apao */
+ pinctrl-names="jtag_apao_pins";
+ pinctrl-0=<&jtag_apao_pins>;
+ };
+
+ saradc:saradc {
+ compatible = "amlogic,meson-g12a-saradc";
+ status = "disabled";
+ #io-channel-cells = <1>;
+ clocks = <&xtal>, <&clkc CLKID_SARADC_GATE>;
+ clock-names = "xtal", "saradc_clk";
+ interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+ reg = <0xff809000 0x48>;
+ };
+
+ vddcpu0: pwmao_d-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm_AO_cd MESON_PWM_1 1500 0>;
+ regulator-name = "vddcpu0";
+ regulator-min-microvolt = <689000>;
+ regulator-max-microvolt = <1049000>;
+ regulator-always-on;
+ max-duty-cycle = <1500>;
+ /* Voltage Duty-Cycle */
+ voltage-table = <1049000 0>,
+ <1039000 3>,
+ <1029000 6>,
+ <1019000 8>,
+ <1009000 11>,
+ <999000 14>,
+ <989000 17>,
+ <979000 20>,
+ <969000 23>,
+ <959000 26>,
+ <949000 29>,
+ <939000 31>,
+ <929000 34>,
+ <919000 37>,
+ <909000 40>,
+ <899000 43>,
+ <889000 45>,
+ <879000 48>,
+ <869000 51>,
+ <859000 54>,
+ <849000 56>,
+ <839000 59>,
+ <829000 62>,
+ <819000 65>,
+ <809000 68>,
+ <799000 70>,
+ <789000 73>,
+ <779000 76>,
+ <769000 79>,
+ <759000 81>,
+ <749000 84>,
+ <739000 87>,
+ <729000 89>,
+ <719000 92>,
+ <709000 95>,
+ <699000 98>,
+ <689000 100>;
+ status = "disabled";
+ };
+
+ aml_dma {
+ compatible = "amlogic,aml_txlx_dma";
+ reg = <0xff63e000 0x48>;
+ interrupts = <0 180 1>;
+
+ aml_aes {
+ compatible = "amlogic,aes_g12a_dma";
+ dev_name = "aml_aes_dma";
+ status = "okay";
+ };
+
+ aml_sha {
+ compatible = "amlogic,sha_dma";
+ dev_name = "aml_sha_dma";
+ status = "okay";
+ };
+ };
+
+ rng {
+ compatible = "amlogic,meson-rng";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xff630218 0x4>;
+ quality = /bits/ 16 <1000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ hiubus: hiubus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0xff63c000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xff63c000 0x2000>;
+
+ clkc: clock-controller@0 {
+ compatible = "amlogic,tl1-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x3fc>;
+ };
+ };/* end of hiubus*/
+
+ audiobus: audiobus@0xff600000 {
+ compatible = "amlogic, audio-controller", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xff600000 0x10000>;
+ ranges = <0x0 0xff600000 0x10000>;
+
+ clkaudio:audio_clocks {
+ compatible = "amlogic, tl1-audio-clocks";
+ #clock-cells = <1>;
+ reg = <0x0 0xb0>;
+ };
+
+ ddr_manager {
+ compatible = "amlogic, tl1-audio-ddr-manager";
+ interrupts = <
+ GIC_SPI 148 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 149 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 150 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 48 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 152 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 153 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 154 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 49 IRQ_TYPE_EDGE_RISING
+ >;
+ interrupt-names =
+ "toddr_a", "toddr_b", "toddr_c",
+ "toddr_d",
+ "frddr_a", "frddr_b", "frddr_c",
+ "frddr_d";
+ };
+ };/* end of audiobus*/
+
+ /* Sound iomap */
+ aml_snd_iomap {
+ compatible = "amlogic, snd-iomap";
+ status = "okay";
+ #address-cells=<1>;
+ #size-cells=<1>;
+ ranges;
+ pdm_bus {
+ reg = <0xFF601000 0x400>;
+ };
+ audiobus_base {
+ reg = <0xFF600000 0x1000>;
+ };
+ audiolocker_base {
+ reg = <0xFF601400 0x400>;
+ };
+ eqdrc_base {
+ reg = <0xFF602000 0x2000>;
+ };
+ reset_base {
+ reg = <0xFFD01000 0x1000>;
+ };
+ vad_base {
+ reg = <0xFF601800 0x800>;
+ };
+ };
+
+ cbus: cbus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0xffd00000 0x27000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xffd00000 0x27000>;
+
+ clk-measure@18004 {
+ compatible = "amlogic,tl1-measure";
+ reg = <0x18004 0x4 0x1800c 0x4>;
+ };
+
+ i2c0: i2c@1f000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x1f000 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 91 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@1e000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x1e000 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@1d000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x1d000 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 94 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@1c000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x1c000 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 95 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-gpio-intc",
+ "amlogic,meson-tl1-gpio-intc";
+ reg = <0xf080 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <64 65 66 67 68 69 70 71>;
+ status = "okay";
+ };
+
+ pwm_ab: pwm@1b000 {
+ compatible = "amlogic,tl1-ee-pwm";
+ reg = <0x1b000 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ /* default xtal 24m clkin0-clkin2 and
+ * clkin1-clkin3 should be set the same
+ */
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@1a000 {
+ compatible = "amlogic,tl1-ee-pwm";
+ reg = <0x1a000 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ pwm_ef: pwm@19000 {
+ compatible = "amlogic,tl1-ee-pwm";
+ reg = <0x19000 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-tl1-spicc",
+ "amlogic,meson-g12a-spicc";
+ reg = <0x13000 0x44>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>,
+ <&clkc CLKID_SPICC0_COMP>;
+ clock-names = "core", "comp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-tl1-spicc",
+ "amlogic,meson-g12a-spicc";
+ reg = <0x15000 0x44>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>,
+ <&clkc CLKID_SPICC1_COMP>;
+ clock-names = "core", "comp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ aobus: aobus@ff800000 {
+ compatible = "simple-bus";
+ reg = <0xff800000 0xb000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xff800000 0xb000>;
+
+ cpu_version {
+ reg = <0x220 0x4>;
+ };
+
+ aoclkc: clock-controller@0 {
+ compatible = "amlogic,tl1-aoclkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x1000>;
+ };
+
+ pwm_AO_ab: pwm@7000 {
+ compatible = "amlogic,tl1-ao-pwm";
+ reg = <0x7000 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ pwm_AO_cd: pwm@2000 {
+ compatible = "amlogic,tl1-ao-pwm";
+ reg = <0x2000 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ uart_AO: serial@3000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x3000 0x18>;
+ interrupts = <0 193 1>;
+ status = "okay";
+ clocks = <&xtal>;
+ clock-names = "clk_uart";
+ xtal_tick_en = <2>;
+ fifosize = < 64 >;
+ //pinctrl-names = "default";
+ //pinctrl-0 = <&ao_a_uart_pins>;
+ /* 0 not support; 1 support */
+ support-sysrq = <0>;
+ };
+
+ uart_AO_B: serial@4000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x4000 0x18>;
+ interrupts = <0 197 1>;
+ status = "disabled";
+ clocks = <&xtal>;
+ clock-names = "clk_uart";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ao_b_uart_pins1>;
+ };
+
+ remote: rc@8040 {
+ compatible = "amlogic, aml_remote";
+ reg = <0x8040 0x44>,
+ <0x8000 0x20>;
+ status = "okay";
+ protocol = <REMOTE_TYPE_NEC>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&remote_pins>;
+ map = <&custom_maps>;
+ max_frame_time = <200>;
+ };
+
+ irblaster: meson-irblaster@14c {
+ compatible = "amlogic, meson_irblaster";
+ reg = <0x14c 0x10>,
+ <0x40 0x4>;
+ #irblaster-cells = <2>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ i2c_AO: i2c@5000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x05000 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c_AO_slave:i2c_slave@6000 {
+ compatible = "amlogic, meson-i2c-slave";
+ status = "disabled";
+ reg = <0x6000 0x20>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names="default";
+ pinctrl-0=<&i2c_ao_slave_pins>;
+ };
+ };/* end of aobus */
+
+ ion_dev {
+ compatible = "amlogic, ion_dev";
+ status = "disabled";
+ memory-region = <&ion_cma_reserved>;
+ };/* end of ion_dev*/
+ }; /* end of soc*/
+
+ custom_maps: custom_maps {
+ mapnum = <3>;
+ map0 = <&map_0>;
+ map1 = <&map_1>;
+ map2 = <&map_2>;
+ map_0: map_0{
+ mapname = "amlogic-remote-1";
+ customcode = <0xfb04>;
+ release_delay = <80>;
+ size = <44>; /*keymap size*/
+ keymap = <REMOTE_KEY(0x01, KEY_1)
+ REMOTE_KEY(0x02, KEY_2)
+ REMOTE_KEY(0x03, KEY_3)
+ REMOTE_KEY(0x04, KEY_4)
+ REMOTE_KEY(0x05, KEY_5)
+ REMOTE_KEY(0x06, KEY_6)
+ REMOTE_KEY(0x07, KEY_7)
+ REMOTE_KEY(0x08, KEY_8)
+ REMOTE_KEY(0x09, KEY_9)
+ REMOTE_KEY(0x0a, KEY_0)
+ REMOTE_KEY(0x1F, KEY_FN_F1)
+ REMOTE_KEY(0x15, KEY_MENU)
+ REMOTE_KEY(0x16, KEY_TAB)
+ REMOTE_KEY(0x0c, KEY_CHANNELUP)
+ REMOTE_KEY(0x0d, KEY_CHANNELDOWN)
+ REMOTE_KEY(0x0e, KEY_VOLUMEUP)
+ REMOTE_KEY(0x0f, KEY_VOLUMEDOWN)
+ REMOTE_KEY(0x11, KEY_HOME)
+ REMOTE_KEY(0x1c, KEY_RIGHT)
+ REMOTE_KEY(0x1b, KEY_LEFT)
+ REMOTE_KEY(0x19, KEY_UP)
+ REMOTE_KEY(0x1a, KEY_DOWN)
+ REMOTE_KEY(0x1d, KEY_ENTER)
+ REMOTE_KEY(0x17, KEY_MUTE)
+ REMOTE_KEY(0x49, KEY_FINANCE)
+ REMOTE_KEY(0x43, KEY_BACK)
+ REMOTE_KEY(0x12, KEY_FN_F4)
+ REMOTE_KEY(0x14, KEY_FN_F5)
+ REMOTE_KEY(0x18, KEY_FN_F6)
+ REMOTE_KEY(0x59, KEY_INFO)
+ REMOTE_KEY(0x5a, KEY_STOPCD)
+ REMOTE_KEY(0x10, KEY_POWER)
+ REMOTE_KEY(0x42, KEY_PREVIOUSSONG)
+ REMOTE_KEY(0x44, KEY_NEXTSONG)
+ REMOTE_KEY(0x1e, KEY_REWIND)
+ REMOTE_KEY(0x4b, KEY_FASTFORWARD)
+ REMOTE_KEY(0x58, KEY_PLAYPAUSE)
+ REMOTE_KEY(0x46, KEY_PROPS)
+ REMOTE_KEY(0x40, KEY_UNDO)
+ REMOTE_KEY(0x38, KEY_SCROLLLOCK)
+ REMOTE_KEY(0x57, KEY_FN)
+ REMOTE_KEY(0x5b, KEY_FN_ESC)
+ REMOTE_KEY(0x13, 195)
+ REMOTE_KEY(0x54, KEY_RED)
+ REMOTE_KEY(0x4c, KEY_GREEN)
+ REMOTE_KEY(0x4e, KEY_YELLOW)
+ REMOTE_KEY(0x55, KEY_BLUE)
+ REMOTE_KEY(0x53, KEY_BLUETOOTH)
+ REMOTE_KEY(0x52, KEY_WLAN)
+ REMOTE_KEY(0x39, KEY_CAMERA)
+ REMOTE_KEY(0x41, KEY_SOUND)
+ REMOTE_KEY(0x0b, KEY_QUESTION)
+ REMOTE_KEY(0x00, KEY_CHAT)
+ REMOTE_KEY(0x13, KEY_SEARCH)>;
+ };
+
+ map_1: map_1{
+ mapname = "amlogic-remote-2";
+ customcode = <0xfe01>;
+ release_delay = <80>;
+ size = <53>;
+ keymap = <REMOTE_KEY(0x01, KEY_1)
+ REMOTE_KEY(0x02, KEY_2)
+ REMOTE_KEY(0x03, KEY_3)
+ REMOTE_KEY(0x04, KEY_4)
+ REMOTE_KEY(0x05, KEY_5)
+ REMOTE_KEY(0x06, KEY_6)
+ REMOTE_KEY(0x07, KEY_7)
+ REMOTE_KEY(0x08, KEY_8)
+ REMOTE_KEY(0x09, KEY_9)
+ REMOTE_KEY(0x0a, KEY_0)
+ REMOTE_KEY(0x1F, KEY_FN_F1)
+ REMOTE_KEY(0x15, KEY_MENU)
+ REMOTE_KEY(0x16, KEY_TAB)
+ REMOTE_KEY(0x0c, KEY_CHANNELUP)
+ REMOTE_KEY(0x0d, KEY_CHANNELDOWN)
+ REMOTE_KEY(0x0e, KEY_VOLUMEUP)
+ REMOTE_KEY(0x0f, KEY_VOLUMEDOWN)
+ REMOTE_KEY(0x11, KEY_HOME)
+ REMOTE_KEY(0x1c, KEY_RIGHT)
+ REMOTE_KEY(0x1b, KEY_LEFT)
+ REMOTE_KEY(0x19, KEY_UP)
+ REMOTE_KEY(0x1a, KEY_DOWN)
+ REMOTE_KEY(0x1d, KEY_ENTER)
+ REMOTE_KEY(0x17, KEY_MUTE)
+ REMOTE_KEY(0x49, KEY_FINANCE)
+ REMOTE_KEY(0x43, KEY_BACK)
+ REMOTE_KEY(0x12, KEY_FN_F4)
+ REMOTE_KEY(0x14, KEY_FN_F5)
+ REMOTE_KEY(0x18, KEY_FN_F6)
+ REMOTE_KEY(0x59, KEY_INFO)
+ REMOTE_KEY(0x5a, KEY_STOPCD)
+ REMOTE_KEY(0x10, KEY_POWER)
+ REMOTE_KEY(0x42, KEY_PREVIOUSSONG)
+ REMOTE_KEY(0x44, KEY_NEXTSONG)
+ REMOTE_KEY(0x1e, KEY_REWIND)
+ REMOTE_KEY(0x4b, KEY_FASTFORWARD)
+ REMOTE_KEY(0x58, KEY_PLAYPAUSE)
+ REMOTE_KEY(0x46, KEY_PROPS)
+ REMOTE_KEY(0x40, KEY_UNDO)
+ REMOTE_KEY(0x38, KEY_SCROLLLOCK)
+ REMOTE_KEY(0x57, KEY_FN)
+ REMOTE_KEY(0x5b, KEY_FN_ESC)
+ REMOTE_KEY(0x54, KEY_RED)
+ REMOTE_KEY(0x4c, KEY_GREEN)
+ REMOTE_KEY(0x4e, KEY_YELLOW)
+ REMOTE_KEY(0x55, KEY_BLUE)
+ REMOTE_KEY(0x53, KEY_BLUETOOTH)
+ REMOTE_KEY(0x52, KEY_WLAN)
+ REMOTE_KEY(0x39, KEY_CAMERA)
+ REMOTE_KEY(0x41, KEY_SOUND)
+ REMOTE_KEY(0x0b, KEY_QUESTION)
+ REMOTE_KEY(0x00, KEY_CHAT)
+ REMOTE_KEY(0x13, KEY_SEARCH)>;
+ };
+
+ map_2: map_2{
+ mapname = "amlogic-remote-3";
+ customcode = <0xbd02>;
+ release_delay = <80>;
+ size = <17>;
+ keymap = <REMOTE_KEY(0xca,KEY_UP)
+ REMOTE_KEY(0xd2,KEY_DOWN)
+ REMOTE_KEY(0x99,KEY_LEFT)
+ REMOTE_KEY(0xc1,KEY_RIGHT)
+ REMOTE_KEY(0xce,KEY_RIGHTCTRL)
+ REMOTE_KEY(0x45,KEY_POWER)
+ REMOTE_KEY(0xc5,KEY_COPY)
+ REMOTE_KEY(0x80,KEY_MUTE)
+ REMOTE_KEY(0xd0,KEY_TAB)
+ REMOTE_KEY(0xd6,KEY_LEFTMETA)
+ REMOTE_KEY(0x95,KEY_HOME)
+ REMOTE_KEY(0xdd,KEY_PAGEUP)
+ REMOTE_KEY(0x8c,KEY_PAGEDOWN)
+ REMOTE_KEY(0x89,KEY_UNDO)
+ REMOTE_KEY(0x9c,KEY_PROPS)
+ REMOTE_KEY(0x9a,KEY_SCALE)
+ REMOTE_KEY(0xcd,KEY_KPCOMMA)>;
+ };
+ };
+
+ uart_A: serial@ffd24000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0xffd24000 0x18>;
+ interrupts = <0 26 1>;
+ status = "disabled";
+ clocks = <&xtal
+ &clkc CLKID_UART0>;
+ clock-names = "clk_uart",
+ "clk_gate";
+ fifosize = < 128 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&a_uart_pins>;
+ };
+
+ uart_B: serial@ffd23000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0xffd23000 0x18>;
+ interrupts = <0 75 1>;
+ status = "disabled";
+ clocks = <&xtal
+ &clkc CLKID_UART1>;
+ clock-names = "clk_uart",
+ "clk_gate";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&b_uart_pins>;
+ };
+
+ uart_C: serial@ffd22000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0xffd22000 0x18>;
+ interrupts = <0 93 1>;
+ status = "disabled";
+ clocks = <&xtal
+ &clkc CLKID_UART1>;
+ clock-names = "clk_uart",
+ "clk_gate";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&c_uart_pins>;
+ };
+
+ sd_emmc_c: emmc@ffe07000 {
+ status = "disabled";
+ compatible = "amlogic, meson-mmc-tl1";
+ reg = <0xffe07000 0x800>;
+ interrupts = <0 191 1>;
+ pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
+ pinctrl-0 = <&emmc_clk_cmd_pins>;
+ pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_GP0_PLL>,
+ <&xtal>;
+ clock-names = "core","clkin0","clkin1","clkin2","clkin3","xtal";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ /* mmc-ddr-1_8v; */
+ /* mmc-hs200-1_8v; */
+
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ emmc {
+ pinname = "emmc";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ /*caps defined in dts*/
+ tx_delay = <0>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio BOOT_3 GPIO_ACTIVE_HIGH>;
+ hw_reset = <&gpio BOOT_12 GPIO_ACTIVE_HIGH>;
+ card_type = <1>;
+ /* 1:mmc card(include eMMC),
+ * 2:sd card(include tSD)
+ */
+ };
+ };
+
+
+ spifc: spifc@ffd14000 {
+ compatible = "amlogic,aml-spi-nor";
+ status = "disabled";
+
+ reg = <0xffd14000 0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifc_all_pins>;
+ clock-names = "core";
+ clocks = <&clkc CLKID_CLK81>;
+
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ spifc-frequency = <40000000>;
+ read-capability = <4>;/* dual read 1_1_2 */
+ spifc-io-width = <4>;
+ };
+ };
+
+ slc_nand: nand-controller@0xFFE07800 {
+ compatible = "amlogic, aml_mtd_nand";
+ status = "disabled";
+ reg = <0xFFE07800 0x200>;
+ interrupts = <0 34 1>;
+
+ pinctrl-names = "nand_rb_mod", "nand_norb_mod", "nand_cs_only";
+ pinctrl-0 = <&all_nand_pins>;
+ pinctrl-1 = <&all_nand_pins>;
+ pinctrl-2 = <&nand_cs_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>;
+ clock-names = "core", "clkin";
+
+ device_id = <0>;
+ /*fip/tpl configurations, must be same
+ *with uboot if bl_mode was set as 1
+ *bl_mode: 0 compact mode;1 descrete mode
+ *if bl_mode was set as 1,fip configuration will work
+ */
+ bl_mode = <1>;
+ /*copy count of fip*/
+ fip_copies = <4>;
+ /*size of each fip copy*/
+ fip_size = <0x200000>;
+ nand_clk_ctrl = <0xFFE07000>;
+ /*partions defined in dts*/
+ };
+
+ mesonstream {
+ compatible = "amlogic, codec, streambuf";
+ status = "okay";
+ clocks = <&clkc CLKID_U_PARSER
+ &clkc CLKID_DEMUX
+ &clkc CLKID_AHB_ARB0
+ &clkc CLKID_CLK81
+ &clkc CLKID_DOS
+ &clkc CLKID_VDEC_MUX
+ &clkc CLKID_HCODEC_MUX
+ &clkc CLKID_HEVC_MUX
+ &clkc CLKID_HEVCF_MUX>;
+ clock-names = "parser_top",
+ "demux",
+ "ahbarb0",
+ "clk_81",
+ "vdec",
+ "clk_vdec_mux",
+ "clk_hcodec_mux",
+ "clk_hevc_mux",
+ "clk_hevcb_mux";
+ };
+
+ vcodec-dec {
+ compatible = "amlogic, vcodec-dec";
+ status = "okay";
+ };
+
+ vdec {
+ compatible = "amlogic, vdec";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 23 1
+ 0 32 1
+ 0 43 1
+ 0 44 1
+ 0 45 1>;
+ interrupt-names = "vsync",
+ "demux",
+ "parser",
+ "mailbox_0",
+ "mailbox_1",
+ "mailbox_2";
+ };
+
+ canvas: canvas {
+ compatible = "amlogic, meson, canvas";
+ status = "okay";
+ reg = <0xff638000 0x2000>;
+ };
+
+ codec_io: codec_io {
+ compatible = "amlogic, codec_io";
+ status = "okay";
+ #address-cells=<1>;
+ #size-cells=<1>;
+ ranges;
+ io_cbus_base{
+ reg = <0xffd00000 0x100000>;
+ };
+ io_dos_base{
+ reg = <0xff620000 0x10000>;
+ };
+ io_hiubus_base{
+ reg = <0xff63c000 0x2000>;
+ };
+ io_aobus_base{
+ reg = <0xff800000 0x10000>;
+ };
+ io_vcbus_base{
+ reg = <0xff900000 0x40000>;
+ };
+ io_dmc_base{
+ reg = <0xff638000 0x2000>;
+ };
+ io_efuse_base{
+ reg = <0xff630000 0x2000>;
+ };
+ };
+
+ rdma {
+ compatible = "amlogic, meson-tl1, rdma";
+ status = "okay";
+ interrupts = <0 89 1>;
+ interrupt-names = "rdma";
+ };
+
+ meson_fb: fb {
+ compatible = "amlogic, meson-tl1";
+ memory-region = <&logo_reserved>;
+ status = "disabled";
+ interrupts = <0 3 1
+ 0 56 1
+ 0 89 1>;
+ interrupt-names = "viu-vsync", "viu2-vsync", "rdma";
+ /* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x01851000*/
+ display_mode_default = "1080p60hz";
+ scale_mode = <1>;
+ /** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
+ display_size_default = <1920 1080 1920 2160 32>;
+ /*1920*1080*4*3 = 0x17BB000*/
+ clocks = <&clkc CLKID_VPU_CLKC_MUX>;
+ clock-names = "vpu_clkc";
+ };
+
+ ge2d {
+ compatible = "amlogic, ge2d-g12a";
+ status = "okay";
+ interrupts = <0 146 1>;
+ interrupt-names = "ge2d";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_G2D>,
+ <&clkc CLKID_GE2D_GATE>;
+ clock-names = "clk_vapb_0",
+ "clk_ge2d",
+ "clk_ge2d_gate";
+ reg = <0xff940000 0x10000>;
+ };
+
+ meson-amvideom {
+ compatible = "amlogic, amvideom";
+ status = "okay";
+ interrupts = <0 3 1>;
+ interrupt-names = "vsync";
+ };
+
+ ionvideo {
+ compatible = "amlogic, ionvideo";
+ status = "okay";
+ };
+
+ amlvideo {
+ compatible = "amlogic, amlvideo";
+ status = "okay";
+ };
+
+ vdac {
+ compatible = "amlogic, vdac-tl1";
+ status = "okay";
+ };
+
+ ddr_bandwidth {
+ compatible = "amlogic, ddr-bandwidth";
+ status = "okay";
+ reg = <0xff638000 0x100
+ 0xff638c00 0x100>;
+ interrupts = <0 52 1>;
+ interrupt-names = "ddr_bandwidth";
+ };
+
+ dmc_monitor {
+ compatible = "amlogic, dmc_monitor";
+ status = "disabled";
+ reg_base = <0xff638800>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ efuse: efuse{
+ compatible = "amlogic, efuse";
+ read_cmd = <0x82000030>;
+ write_cmd = <0x82000031>;
+ get_max_cmd = <0x82000033>;
+ key = <&efusekey>;
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "efuse_clk";
+ status = "disabled";
+ };
+
+ efusekey:efusekey{
+ keynum = <4>;
+ key0 = <&key_0>;
+ key1 = <&key_1>;
+ key2 = <&key_2>;
+ key3 = <&key_3>;
+ key_0:key_0{
+ keyname = "mac";
+ offset = <0>;
+ size = <6>;
+ };
+ key_1:key_1{
+ keyname = "mac_bt";
+ offset = <6>;
+ size = <6>;
+ };
+ key_2:key_2{
+ keyname = "mac_wifi";
+ offset = <12>;
+ size = <6>;
+ };
+ key_3:key_3{
+ keyname = "usid";
+ offset = <18>;
+ size = <16>;
+ };
+ };
+
+ audio_data: audio_data {
+ compatible = "amlogic, audio_data";
+ query_licence_cmd = <0x82000050>;
+ status = "disabled";
+ };
+
+ defendkey: defendkey {
+ compatible = "amlogic, defendkey";
+ mem_size = <0 0x100000>;
+ status = "okay";
+ };
+ cpu_ver_name {
+ compatible = "amlogic, cpu-major-id-tm2";
+ };
+}; /* end of / */
+
+&pinctrl_aobus {
+ sd_to_ao_uart_clr_pins: sd_to_ao_uart_clr_pins {
+ mux {
+ groups = "GPIOAO_0",
+ "GPIOAO_1",
+ "GPIOAO_2",
+ "GPIOAO_3",
+ "GPIOAO_4",
+ "GPIOAO_5",
+ "GPIOAO_6",
+ "GPIOAO_7",
+ "GPIOAO_8",
+ "GPIOAO_9",
+ "GPIOAO_10",
+ "GPIOAO_11",
+ "GPIOE_0",
+ "GPIOE_1",
+ "GPIOE_2",
+ "GPIO_TEST_N";
+ function = "gpio_aobus";
+ };
+ };
+
+ sd_to_ao_uart_pins: sd_to_ao_uart_pins {
+ mux {
+ groups = "uart_ao_a_tx",
+ "uart_ao_a_rx",
+ "uart_ao_a_cts",
+ "uart_ao_a_rts";
+ function = "uart_ao_a";
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ remote_pins:remote_pin {
+ mux {
+ groups = "remote_input_ao";
+ function = "remote_input_ao";
+ };
+ };
+
+ pwm_ao_a_pins: pwm_ao_a {
+ mux {
+ groups = "pwm_ao_a";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_a_hiz_pins: pwm_ao_a_hiz {
+ mux {
+ groups = "pwm_ao_a_hiz";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_b_pins: pwm_ao_b {
+ mux {
+ groups = "pwm_ao_b";
+ function = "pwm_ao_b";
+ };
+ };
+
+ pwm_ao_c_pins1: pwm_ao_c_pins1 {
+ mux {
+ groups = "pwm_ao_c_4";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_c_pins2: pwm_ao_c_pins2 {
+ mux {
+ groups = "pwm_ao_c_6";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_c_hiz_pins1: pwm_ao_c_hiz1 {
+ mux {
+ groups = "pwm_ao_c_hiz_4";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_c_hiz_pins2: pwm_ao_c_hiz2 {
+ mux {
+ groups = "pwm_ao_c_hiz_7";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_d_pins1: pwm_ao_d_pins1 {
+ mux {
+ groups = "pwm_ao_d_5";
+ function = "pwm_ao_d";
+ };
+ };
+
+ pwm_ao_d_pins2: pwm_ao_d_pins2 {
+ mux {
+ groups = "pwm_ao_d_10";
+ function = "pwm_ao_d";
+ };
+ };
+
+ pwm_ao_d_pins3: pwm_ao_d_pins3 {
+ mux {
+ groups = "pwm_ao_d_e";
+ function = "pwm_ao_d";
+ };
+ };
+
+ pwm_a_e2: pwm_a_e2 {
+ mux {
+ groups = "pwm_a_e2";
+ function = "pwm_a_e2";
+ };
+ };
+
+ i2c_ao_2_pins:i2c_ao_2 {
+ mux {
+ groups = "i2c_ao_sck_2",
+ "i2c_ao_sda_3";
+ function = "i2c_ao";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c_ao_e_pins:i2c_ao_e {
+ mux {
+ groups = "i2c_ao_sck_e",
+ "i2c_ao_sda_e";
+ function = "i2c_ao";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c_ao_slave_pins:i2c_ao_slave {
+ mux {
+ groups = "i2c_ao_slave_sck",
+ "i2c_ao_slave_sda";
+ function = "i2c_ao_slave";
+ };
+ };
+
+ ao_uart_pins:ao_uart {
+ mux {
+ groups = "uart_ao_a_rx",
+ "uart_ao_a_tx";
+ function = "uart_ao_a";
+ };
+ };
+
+ ao_b_uart_pins1:ao_b_uart1 {
+ mux {
+ groups = "uart_ao_b_tx_2",
+ "uart_ao_b_rx_3";
+ function = "uart_ao_b";
+ };
+ };
+
+ ao_b_uart_pins2:ao_b_uart2 {
+ mux {
+ groups = "uart_ao_b_tx_8",
+ "uart_ao_b_rx_9";
+ function = "uart_ao_b";
+ };
+ };
+
+ irblaster_pins:irblaster_pin {
+ mux {
+ groups = "remote_out_ao";
+ function = "remote_out_ao";
+ };
+ };
+
+ irblaster_pins1:irblaster_pin1 {
+ mux {
+ groups = "remote_out_ao9";
+ function = "remote_out_ao";
+ };
+ };
+
+ jtag_apao_pins:jtag_apao_pin {
+ mux {
+ groups = "jtag_a_tdi",
+ "jtag_a_tdo",
+ "jtag_a_clk",
+ "jtag_a_tms";
+ function = "jtag_a";
+ };
+ };
+};
+
+&pinctrl_periphs {
+ /* sdemmc portC */
+ emmc_clk_cmd_pins: emmc_clk_cmd_pins {
+ mux {
+ groups = "emmc_clk",
+ "emmc_cmd";
+ function = "emmc";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ emmc_conf_pull_up: emmc_conf_pull_up {
+ mux {
+ groups = "emmc_nand_d7",
+ "emmc_nand_d6",
+ "emmc_nand_d5",
+ "emmc_nand_d4",
+ "emmc_nand_d3",
+ "emmc_nand_d2",
+ "emmc_nand_d1",
+ "emmc_nand_d0",
+ "emmc_clk",
+ "emmc_cmd";
+ function = "emmc";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ emmc_conf_pull_done: emmc_conf_pull_done {
+ mux {
+ groups = "emmc_nand_ds";
+ function = "emmc";
+ input-enable;
+ bias-pull-down;
+ drive-strength = <3>;
+ };
+ };
+
+ /* sdemmc portB */
+ sd_clk_cmd_pins: sd_clk_cmd_pins {
+ mux {
+ groups = "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ sd_all_pins: sd_all_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ sd_1bit_pins: sd_1bit_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ ao_to_sd_uart_pins: ao_to_sd_uart_pins {
+ mux {
+ groups ="uart_ao_a_rx_w3",
+ "uart_ao_a_tx_w2",
+ "uart_ao_a_rx_w7",
+ "uart_ao_a_tx_w6",
+ "uart_ao_a_rx_w11",
+ "uart_ao_a_tx_w10";
+ function = "uart_ao_a_ee";
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ all_nand_pins: all_nand_pins {
+ mux {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "nand_ce0",
+ "nand_ale",
+ "nand_cle",
+ "nand_wen_clk",
+ "nand_ren_wr";
+ function = "nand";
+ input-enable;
+ drive-strength = <3>;
+ };
+ };
+
+ nand_cs_pins:nand_cs {
+ mux {
+ groups = "nand_ce0";
+ function = "nand";
+ drive-strength = <3>;
+ };
+ };
+
+ /* sdemmc port */
+ sdio_clk_cmd_pins: sdio_clk_cmd_pins {
+ mux {
+ groups = "sdcard_clk",
+ "sdcard_cmd";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ sdio_all_pins: sdio_all_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_clk",
+ "sdcard_cmd";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ spifc_cs_pin:spifc_cs_pin {
+ mux {
+ groups = "nor_cs";
+ function = "nor";
+ bias-pull-up;
+ };
+ };
+
+ spifc_pulldown: spifc_pulldown {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c";
+ function = "nor";
+ bias-pull-down;
+ };
+ };
+
+ spifc_pullup: spifc_pullup {
+ mux {
+ groups = "nor_cs";
+ function = "nor";
+ bias-pull-up;
+ };
+ };
+
+ spifc_all_pins: spifc_all_pins {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_hold",
+ "nor_wp";
+ function = "nor";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ pwm_a_pins: pwm_a {
+ mux {
+ groups = "pwm_a";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_b_pins1: pwm_b_pins1 {
+ mux {
+ groups = "pwm_b_c";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_b_pins2: pwm_b_pins2 {
+ mux {
+ groups = "pwm_b_z";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_c_pins1: pwm_c_pins1 {
+ mux {
+ groups = "pwm_c_dv";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_c_pins2: pwm_c_pins2 {
+ mux {
+ groups = "pwm_c_h";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_c_pins3: pwm_c_pins3 {
+ mux {
+ groups = "pwm_c_z";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_d_pins1: pwm_d_pins1 {
+ mux {
+ groups = "pwm_d_dv";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_d_pins2: pwm_d_pins2 {
+ mux {
+ groups = "pwm_d_z";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_e_pins1: pwm_e1 {
+ mux {
+ groups = "pwm_e_dv";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_e_pins2: pwm_e2 {
+ mux {
+ groups = "pwm_e_z";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_f_pins1: pwm_f_pins1 {
+ mux {
+ groups = "pwm_f_dv";
+ function = "pwm_f";
+ };
+ };
+
+ pwm_f_pins2: pwm_f_pins2 {
+ mux {
+ groups = "pwm_f_z";
+ function = "pwm_f";
+ };
+ };
+
+ i2c0_c_pins:i2c0_c {
+ mux {
+ groups = "i2c0_sda_c",
+ "i2c0_sck_c";
+ function = "i2c0";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c0_dv_pins:i2c0_dv {
+ mux {
+ groups = "i2c0_sda_dv",
+ "i2c0_sck_dv";
+ function = "i2c0";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c1_z_pins:i2c1_z {
+ mux {
+ groups = "i2c1_sda_z",
+ "i2c1_sck_z";
+ function = "i2c1";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c1_h_pins:i2c1_h {
+ mux {
+ groups = "i2c1_sda_h",
+ "i2c1_sck_h";
+ function = "i2c1";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c2_h_pins:i2c2_h {
+ mux {
+ groups = "i2c2_sda_h",
+ "i2c2_sck_h";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c2_z_pins:i2c2_z {
+ mux {
+ groups = "i2c2_sda_z",
+ "i2c2_sck_z";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_h1_pins:i2c3_h1 {
+ mux {
+ groups = "i2c3_sda_h1",
+ "i2c3_sck_h0";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_h20_pins:i2c3_h3 {
+ mux {
+ groups = "i2c3_sda_h20",
+ "i2c3_sck_h19";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_dv_pins:i2c3_dv {
+ mux {
+ groups = "i2c3_sda_dv",
+ "i2c3_sck_dv";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_c_pins:i2c3_c {
+ mux {
+ groups = "i2c3_sda_c",
+ "i2c3_sck_c";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ spicc0_pins_h: spicc0_pins_h {
+ mux {
+ groups = "spi0_mosi_h",
+ "spi0_miso_h",
+ "spi0_clk_h";
+ function = "spi0";
+ drive-strength = <1>;
+ };
+ };
+
+ spicc1_pins_dv: spicc1_pins_dv {
+ mux {
+ groups = "spi1_mosi_dv",
+ "spi1_miso_dv",
+ "spi1_clk_dv";
+ function = "spi1";
+ drive-strength = <1>;
+ };
+ };
+
+ internal_eth_pins: internal_eth_pins {
+ mux {
+ groups = "eth_link_led",
+ "eth_act_led";
+ function = "eth";
+ };
+ };
+
+ internal_gpio_pins: internal_gpio_pins {
+ mux {
+ groups = "GPIOZ_14",
+ "GPIOZ_15";
+ function = "gpio_periphs";
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ external_eth_pins: external_eth_pins {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_rgmii_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen",
+ "eth_txd0",
+ "eth_txd1",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ drive-strength = <3>;
+ };
+ };
+
+ a_uart_pins:a_uart {
+ mux {
+ groups = "uart_a_tx",
+ "uart_a_rx",
+ "uart_a_cts",
+ "uart_a_rts";
+ function = "uart_a";
+ };
+ };
+
+ b_uart_pins:b_uart {
+ mux {
+ groups = "uart_b_tx",
+ "uart_b_rx";
+ function = "uart_b";
+ };
+ };
+
+ c_uart_pins:c_uart {
+ mux {
+ groups = "uart_c_tx",
+ "uart_c_rx";
+ function = "uart_c";
+ };
+ };
+
+ atvdemod_agc_pins: atvdemod_agc_pins {
+ mux {
+ groups = "atv_if_agc_dv";
+ function = "atv";
+ };
+ };
+
+ dtvdemod_agc_pins: dtvdemod_agc_pins {
+ mux {
+ groups = "dtv_if_agc_dv2";
+ function = "dtv";
+ };
+ };
+
+ lcd_vbyone_pins: lcd_vbyone_pin {
+ mux {
+ groups = "vx1_lockn","vx1_htpdn";
+ function = "vx1";
+ };
+ };
+
+ lcd_vbyone_off_pins: lcd_vbyone_off_pin {
+ mux {
+ groups = "GPIOH_15","GPIOH_16";
+ function = "gpio_periphs";
+ input-enable;
+ };
+ };
+
+ lcd_tcon_pins: lcd_tcon_pin {
+ mux {
+ groups = "tcon_0","tcon_1","tcon_2","tcon_3",
+ "tcon_4","tcon_5","tcon_6","tcon_7",
+ "tcon_8","tcon_9","tcon_10","tcon_11",
+ "tcon_12","tcon_13","tcon_14","tcon_15",
+ "tcon_lock","tcon_spi_mo","tcon_spi_mi",
+ "tcon_spi_clk","tcon_spi_ss";
+ function = "tcon";
+ };
+ };
+ lcd_tcon_off_pins: lcd_tcon_off_pin {
+ mux {
+ groups = "GPIOH_0","GPIOH_1","GPIOH_2","GPIOH_3",
+ "GPIOH_4","GPIOH_5","GPIOH_6","GPIOH_7",
+ "GPIOH_8","GPIOH_9","GPIOH_10","GPIOH_11",
+ "GPIOH_12","GPIOH_13","GPIOH_14","GPIOH_15",
+ "GPIOH_16","GPIOH_17","GPIOH_18","GPIOH_19",
+ "GPIOH_20";
+ function = "gpio_periphs";
+ input-enable;
+ };
+ };
+};
+
+&gpu{
+ tbl = <&dvfs285_cfg
+ &dvfs400_cfg
+ &dvfs500_cfg
+ &dvfs666_cfg
+ &dvfs800_cfg
+ &dvfs800_cfg>;
+};
--- /dev/null
+/*
+ * arch/arm64/boot/dts/amlogic/mesontl1.dtsi
+ *
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-tl1-gpio.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/meson_rc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pwm/meson.h>
+#include <dt-bindings/clock/amlogic,tl1-clkc.h>
+#include <dt-bindings/clock/amlogic,tl1-audio-clk.h>
+#include "mesong12a-bifrost.dtsi"
+#include <dt-bindings/iio/adc/amlogic-saradc.h>
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus:cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ #cooling-cells = <2>;/* min followed by max */
+ CPU0:cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x0>;
+ //timer=<&timer_a>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+
+ CPU1:cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x1>;
+ //timer=<&timer_b>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+
+ CPU2:cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x2>;
+ //timer=<&timer_c>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+
+ CPU3:cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x3>;
+ //timer=<&timer_d>;
+ enable-method = "psci";
+ clocks = <&clkc CLKID_CPU_CLK>,
+ <&clkc CLKID_CPU_FCLK_P>,
+ <&clkc CLKID_SYS_PLL>;
+ clock-names = "core_clk",
+ "low_freq_clk_parent",
+ "high_freq_clk_parent";
+ operating-points-v2 = <&cpu_opp_table0>;
+ cpu-supply = <&vddcpu0>;
+ //cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 0xff01>,
+ <GIC_PPI 14 0xff01>,
+ <GIC_PPI 11 0xff01>,
+ <GIC_PPI 10 0xff01>;
+ };
+
+ timer_bc {
+ compatible = "arm, meson-bc-timer";
+ reg = <0x0 0xffd0f190 0x0 0x4 0x0 0xffd0f194 0x0 0x4>;
+ timer_name = "Meson TimerF";
+ clockevent-rating =<300>;
+ clockevent-shift =<20>;
+ clockevent-features =<0x23>;
+ interrupts = <0 60 1>;
+ bit_enable =<16>;
+ bit_mode =<12>;
+ bit_resolution =<0>;
+ };
+
+ arm_pmu {
+ compatible = "arm,armv8-pmuv3";
+ /* clusterb-enabled; */
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xff634680 0x0 0x4>;
+ cpumasks = <0xf>;
+ /* default 10ms */
+ relax-timer-ns = <10000000>;
+ /* default 10000us */
+ max-wait-cnt = <10000>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ interrupt-controller;
+ reg = <0x0 0xffc01000 0x0 0x1000>,
+ <0x0 0xffc02000 0x0 0x0100>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ secmon {
+ compatible = "amlogic, secmon";
+ memory-region = <&secmon_reserved>;
+ in_base_func = <0x82000020>;
+ out_base_func = <0x82000021>;
+ reserve_mem_size = <0x00300000>;
+ };
+
+ securitykey {
+ compatible = "amlogic, securitykey";
+ status = "okay";
+ storage_query = <0x82000060>;
+ storage_read = <0x82000061>;
+ storage_write = <0x82000062>;
+ storage_tell = <0x82000063>;
+ storage_verify = <0x82000064>;
+ storage_status = <0x82000065>;
+ storage_list = <0x82000067>;
+ storage_remove = <0x82000068>;
+ storage_in_func = <0x82000023>;
+ storage_out_func = <0x82000024>;
+ storage_block_func = <0x82000025>;
+ storage_size_func = <0x82000027>;
+ storage_set_enctype = <0x8200006A>;
+ storage_get_enctype = <0x8200006B>;
+ storage_version = <0x8200006C>;
+ };
+
+ mailbox: mhu@ff63c400 {
+ status = "disabled";
+ compatible = "amlogic, meson_mhu";
+ reg = <0x0 0xff63c400 0x0 0x4c>, /* MHU registers */
+ <0x0 0xfffd7000 0x0 0x800>; /* Payload area */
+ interrupts = <0 209 1>, /* low priority interrupt */
+ <0 210 1>; /* high priority interrupt */
+ #mbox-cells = <1>;
+ mbox-names = "cpu_to_scp_low", "cpu_to_scp_high";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ };
+
+ cpu_iomap {
+ compatible = "amlogic, iomap";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ io_cbus_base {
+ reg = <0x0 0xffd00000 0x0 0x101000>;
+ };
+ io_apb_base {
+ reg = <0x0 0xffe01000 0x0 0x19f000>;
+ };
+ io_aobus_base {
+ reg = <0x0 0xff800000 0x0 0x100000>;
+ };
+ io_vapb_base {
+ reg = <0x0 0xff900000 0x0 0x200000>;
+ };
+ io_hiu_base {
+ reg = <0x0 0xff63c000 0x0 0x2000>;
+ };
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ meson_suspend: pm {
+ compatible = "amlogic, pm";
+ /*gxbaby-suspend;*/
+ status = "okay";
+ reg = <0x0 0xff8000a8 0x0 0x4>,
+ <0x0 0xff80023c 0x0 0x4>;
+ };
+
+ cpuinfo {
+ compatible = "amlogic, cpuinfo";
+ status = "okay";
+ cpuinfo_cmd = <0x82000044>;
+ };
+
+ reboot {
+ compatible = "amlogic,reboot";
+ sys_reset = <0x84000009>;
+ sys_poweroff = <0x84000008>;
+ };
+
+ ram-dump {
+ compatible = "amlogic, ram_dump";
+ status = "okay";
+ reg = <0x0 0xFF6345E0 0x0 4>;
+ reg-names = "PREG_STICKY_REG8";
+ };
+
+ securitykey {
+ compatible = "amlogic, securitykey";
+ status = "disabled";
+ storage_query = <0x82000060>;
+ storage_read = <0x82000061>;
+ storage_write = <0x82000062>;
+ storage_tell = <0x82000063>;
+ storage_verify = <0x82000064>;
+ storage_status = <0x82000065>;
+ storage_list = <0x82000067>;
+ storage_remove = <0x82000068>;
+ storage_in_func = <0x82000023>;
+ storage_out_func = <0x82000024>;
+ storage_block_func = <0x82000025>;
+ storage_size_func = <0x82000027>;
+ storage_set_enctype = <0x8200006A>;
+ storage_get_enctype = <0x8200006B>;
+ storage_version = <0x8200006C>;
+ };
+
+ vpu {
+ compatible = "amlogic, vpu-tl1";
+ status = "okay";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_VPU_INTR>,
+ <&clkc CLKID_VPU_P0_COMP>,
+ <&clkc CLKID_VPU_P1_COMP>,
+ <&clkc CLKID_VPU_MUX>;
+ clock-names = "vapb_clk",
+ "vpu_intr_gate",
+ "vpu_clk0",
+ "vpu_clk1",
+ "vpu_clk";
+ clk_level = <7>;
+ /* 0: 100.0M 1: 166.7M 2: 200.0M 3: 250.0M */
+ /* 4: 333.3M 5: 400.0M 6: 500.0M 7: 666.7M */
+ };
+
+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic, g12a-eth-dwmac","snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8
+ 0x0 0xff64c000 0x0 0xa0>;
+ reg-names = "eth_base", "eth_cfg", "eth_pll";
+ interrupts = <0 8 1>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ clocks = <&clkc CLKID_ETH_CORE>;
+ clock-names = "ethclk81";
+ pll_val = <0x9c0040a 0x927e0000 0xac5f49e5>;
+ analog_val = <0x20200000 0x0000c000 0x00000023>;
+ };
+
+ pinctrl_aobus: pinctrl@ff800014 {
+ compatible = "amlogic,meson-tl1-aobus-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio_ao: ao-bank@ff800014 {
+ reg = <0x0 0xff800014 0x0 0x8>,
+ <0x0 0xff800024 0x0 0x14>,
+ <0x0 0xff80001c 0x0 0x8>;
+ reg-names = "mux", "gpio", "drive-strength";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ aoceca_mux:aoceca_mux {
+ mux {
+ groups = "cec_ao_a";
+ function = "cec_ao";
+ };
+ };
+
+ aocecb_mux:aocecb_mux {
+ mux {
+ groups = "cec_ao_b";
+ function = "cec_ao";
+ };
+ };
+ };
+
+ pinctrl_periphs: pinctrl@ff6346c0 {
+ compatible = "amlogic,meson-tl1-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: banks@ff6346c0 {
+ reg = <0x0 0xff6346c0 0x0 0x40>,
+ <0x0 0xff6344e8 0x0 0x18>,
+ <0x0 0xff634520 0x0 0x18>,
+ <0x0 0xff634440 0x0 0x4c>,
+ <0x0 0xff634740 0x0 0x1c>;
+ reg-names = "mux",
+ "pull",
+ "pull-enable",
+ "gpio",
+ "drive-strength";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+
+ hdmirx_a_mux:hdmirx_a_mux {
+ mux {
+ groups = "hdmirx_a_hpd", "hdmirx_a_det",
+ "hdmirx_a_sda", "hdmirx_a_sck";
+ function = "hdmirx_a";
+ };
+ };
+
+ hdmirx_b_mux:hdmirx_b_mux {
+ mux {
+ groups = "hdmirx_b_hpd", "hdmirx_b_det",
+ "hdmirx_b_sda", "hdmirx_b_sck";
+ function = "hdmirx_b";
+ };
+ };
+
+ hdmirx_c_mux:hdmirx_c_mux {
+ mux {
+ groups = "hdmirx_c_hpd", "hdmirx_c_det",
+ "hdmirx_c_sda", "hdmirx_c_sck";
+ function = "hdmirx_c";
+ };
+ };
+
+ };
+
+ dwc3: dwc3@ff500000 {
+ compatible = "synopsys, dwc3";
+ status = "disabled";
+ reg = <0x0 0xff500000 0x0 0x100000>;
+ interrupts = <0 30 4>;
+ usb-phy = <&usb2_phy_v2>, <&usb3_phy_v2>;
+ cpu-type = "gxl";
+ clock-src = "usb3.0";
+ clocks = <&clkc CLKID_USB_GENERAL>;
+ clock-names = "dwc_general";
+ };
+
+ usb2_phy_v2: usb2phy@ffe09000 {
+ compatible = "amlogic, amlogic-new-usb2-v2";
+ status = "disabled";
+ reg = <0x0 0xffe09000 0x0 0x80
+ 0x0 0xffd01008 0x0 0x100
+ 0x0 0xff636000 0x0 0x2000
+ 0x0 0xff63a000 0x0 0x2000
+ 0x0 0xff658000 0x0 0x2000>;
+ pll-setting-1 = <0x09400414>;
+ pll-setting-2 = <0x927E0000>;
+ pll-setting-3 = <0xac5f69e5>;
+ pll-setting-4 = <0xfe18>;
+ pll-setting-5 = <0x8000fff>;
+ pll-setting-6 = <0x78000>;
+ pll-setting-7 = <0xe0004>;
+ pll-setting-8 = <0xe000c>;
+ version = <1>;
+ };
+
+ usb3_phy_v2: usb3phy@ffe09080 {
+ compatible = "amlogic, amlogic-new-usb3-v2";
+ status = "disabled";
+ reg = <0x0 0xffe09080 0x0 0x20>;
+ phy-reg = <0xff646000>;
+ phy-reg-size = <0x2000>;
+ usb2-phy-reg = <0xffe09000>;
+ usb2-phy-reg-size = <0x80>;
+ interrupts = <0 16 4>;
+ };
+
+ dwc2_a: dwc2_a@ff400000 {
+ compatible = "amlogic, dwc2";
+ status = "disabled";
+ device_name = "dwc2_a";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ interrupts = <0 31 4>;
+ pl-periph-id = <0>; /** lm name */
+ clock-src = "usb0"; /** clock src */
+ port-id = <0>; /** ref to mach/usb.h */
+ port-type = <2>; /** 0: otg, 1: host, 2: slave */
+ port-speed = <0>; /** 0: default, high, 1: full */
+ port-config = <0>; /** 0: default */
+ /*0:default,1:single,2:incr,3:incr4,4:incr8,5:incr16,6:disable*/
+ port-dma = <0>;
+ port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
+ usb-fifo = <728>;
+ cpu-type = "v2";
+ phy-reg = <0xffe09000>;
+ phy-reg-size = <0xa0>;
+ /** phy-interface: 0x0: amlogic-v1 phy, 0x1: synopsys phy **/
+ /** 0x2: amlogic-v2 phy **/
+ phy-interface = <0x2>;
+ clocks = <&clkc CLKID_USB_GENERAL
+ &clkc CLKID_USB1_TO_DDR>;
+ clock-names = "usb_general",
+ "usb1";
+ };
+
+ wdt: watchdog@0xffd0f0d0 {
+ compatible = "amlogic, meson-wdt";
+ status = "disabled";
+ default_timeout=<10>;
+ reset_watchdog_method=<1>; /* 0:sysfs,1:kernel */
+ reset_watchdog_time=<2>;
+ shutdown_timeout=<10>;
+ firmware_timeout=<6>;
+ suspend_timeout=<6>;
+ reg = <0x0 0xffd0f0d0 0x0 0x10>;
+ clock-names = "xtal";
+ clocks = <&xtal>;
+ };
+
+ jtag {
+ compatible = "amlogic, jtag";
+ status = "okay";
+ select = "disable"; /* disable/apao */
+ pinctrl-names="jtag_apao_pins";
+ pinctrl-0=<&jtag_apao_pins>;
+ };
+
+ saradc:saradc {
+ compatible = "amlogic,meson-g12a-saradc";
+ status = "disabled";
+ #io-channel-cells = <1>;
+ clocks = <&xtal>, <&clkc CLKID_SARADC_GATE>;
+ clock-names = "xtal", "saradc_clk";
+ interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x0 0xff809000 0x0 0x48>;
+ };
+
+ vddcpu0: pwmao_d-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm_AO_cd MESON_PWM_1 1500 0>;
+ regulator-name = "vddcpu0";
+ regulator-min-microvolt = <689000>;
+ regulator-max-microvolt = <1049000>;
+ regulator-always-on;
+ max-duty-cycle = <1500>;
+ /* Voltage Duty-Cycle */
+ voltage-table = <1049000 0>,
+ <1039000 3>,
+ <1029000 6>,
+ <1019000 8>,
+ <1009000 11>,
+ <999000 14>,
+ <989000 17>,
+ <979000 20>,
+ <969000 23>,
+ <959000 26>,
+ <949000 29>,
+ <939000 31>,
+ <929000 34>,
+ <919000 37>,
+ <909000 40>,
+ <899000 43>,
+ <889000 45>,
+ <879000 48>,
+ <869000 51>,
+ <859000 54>,
+ <849000 56>,
+ <839000 59>,
+ <829000 62>,
+ <819000 65>,
+ <809000 68>,
+ <799000 70>,
+ <789000 73>,
+ <779000 76>,
+ <769000 79>,
+ <759000 81>,
+ <749000 84>,
+ <739000 87>,
+ <729000 89>,
+ <719000 92>,
+ <709000 95>,
+ <699000 98>,
+ <689000 100>;
+ status = "disabled";
+ };
+
+ aml_dma {
+ compatible = "amlogic,aml_txlx_dma";
+ reg = <0x0 0xff63e000 0x0 0x48>;
+ interrupts = <0 180 1>;
+
+ aml_aes {
+ compatible = "amlogic,aes_g12a_dma";
+ dev_name = "aml_aes_dma";
+ status = "okay";
+ };
+
+ aml_sha {
+ compatible = "amlogic,sha_dma";
+ dev_name = "aml_sha_dma";
+ status = "okay";
+ };
+ };
+
+ rng {
+ compatible = "amlogic,meson-rng";
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0xff630218 0x0 0x4>;
+ quality = /bits/ 16 <1000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ hiubus: hiubus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x2000>;
+
+ clkc: clock-controller@0 {
+ compatible = "amlogic,tl1-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3fc>;
+ };
+ };/* end of hiubus*/
+
+ audiobus: audiobus@0xff600000 {
+ compatible = "amlogic, audio-controller", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0xff600000 0x0 0x10000>;
+ ranges = <0x0 0x0 0x0 0xff600000 0x0 0x10000>;
+
+ clkaudio:audio_clocks {
+ compatible = "amlogic, tl1-audio-clocks";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0xb0>;
+ };
+
+ ddr_manager {
+ compatible = "amlogic, tl1-audio-ddr-manager";
+ interrupts = <
+ GIC_SPI 148 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 149 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 150 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 48 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 152 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 153 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 154 IRQ_TYPE_EDGE_RISING
+ GIC_SPI 49 IRQ_TYPE_EDGE_RISING
+ >;
+ interrupt-names =
+ "toddr_a", "toddr_b", "toddr_c",
+ "toddr_d",
+ "frddr_a", "frddr_b", "frddr_c",
+ "frddr_d";
+ };
+ };/* end of audiobus*/
+
+ /* Sound iomap */
+ aml_snd_iomap {
+ compatible = "amlogic, snd-iomap";
+ status = "okay";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ pdm_bus {
+ reg = <0x0 0xFF601000 0x0 0x400>;
+ };
+ audiobus_base {
+ reg = <0x0 0xFF600000 0x0 0x1000>;
+ };
+ audiolocker_base {
+ reg = <0x0 0xFF601400 0x0 0x400>;
+ };
+ eqdrc_base {
+ reg = <0x0 0xFF602000 0x0 0x2000>;
+ };
+ reset_base {
+ reg = <0x0 0xFFD01000 0x0 0x1000>;
+ };
+ vad_base {
+ reg = <0x0 0xFF601800 0x0 0x800>;
+ };
+ };
+
+ cbus: cbus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x27000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x27000>;
+
+ clk-measure@18004 {
+ compatible = "amlogic,tl1-measure";
+ reg = <0x0 0x18004 0x0 0x4 0x0 0x1800c 0x0 0x4>;
+ ringctrl = <0xff6345fc>;
+ };
+
+ i2c0: i2c@1f000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x0 0x1f000 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 91 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@1e000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x0 0x1e000 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c2: i2c@1d000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x0 0x1d000 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 94 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c3: i2c@1c000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x0 0x1c000 0x0 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 95 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-gpio-intc",
+ "amlogic,meson-tl1-gpio-intc";
+ reg = <0x0 0xf080 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <64 65 66 67 68 69 70 71>;
+ status = "okay";
+ };
+
+ pwm_ab: pwm@1b000 {
+ compatible = "amlogic,tl1-ee-pwm";
+ reg = <0x0 0x1b000 0x0 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ /* default xtal 24m clkin0-clkin2 and
+ * clkin1-clkin3 should be set the same
+ */
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@1a000 {
+ compatible = "amlogic,tl1-ee-pwm";
+ reg = <0x0 0x1a000 0x0 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ pwm_ef: pwm@19000 {
+ compatible = "amlogic,tl1-ee-pwm";
+ reg = <0x0 0x19000 0x0 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-tl1-spicc",
+ "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x13000 0x0 0x44>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>,
+ <&clkc CLKID_SPICC0_COMP>;
+ clock-names = "core", "comp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-tl1-spicc",
+ "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x15000 0x0 0x44>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>,
+ <&clkc CLKID_SPICC1_COMP>;
+ clock-names = "core", "comp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ aobus: aobus@ff800000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff800000 0x0 0xb000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff800000 0x0 0xb000>;
+
+ cpu_version {
+ reg = <0x0 0x220 0x0 0x4>;
+ };
+
+ aoclkc: clock-controller@0 {
+ compatible = "amlogic,tl1-aoclkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x1000>;
+ };
+
+ pwm_AO_ab: pwm@7000 {
+ compatible = "amlogic,tl1-ao-pwm";
+ reg = <0x0 0x7000 0x0 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ pwm_AO_cd: pwm@2000 {
+ compatible = "amlogic,tl1-ao-pwm";
+ reg = <0x0 0x2000 0x0 0x20>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,
+ <&xtal>,
+ <&xtal>,
+ <&xtal>;
+ clock-names = "clkin0",
+ "clkin1",
+ "clkin2",
+ "clkin3";
+ status = "disabled";
+ };
+
+ uart_AO: serial@3000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0x3000 0x0 0x18>;
+ interrupts = <0 193 1>;
+ status = "okay";
+ clocks = <&xtal>;
+ clock-names = "clk_uart";
+ xtal_tick_en = <2>;
+ fifosize = < 64 >;
+ //pinctrl-names = "default";
+ //pinctrl-0 = <&ao_a_uart_pins>;
+ /* 0 not support; 1 support */
+ support-sysrq = <0>;
+ };
+
+ uart_AO_B: serial@4000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0x4000 0x0 0x18>;
+ interrupts = <0 197 1>;
+ status = "disabled";
+ clocks = <&xtal>;
+ clock-names = "clk_uart";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ao_b_uart_pins1>;
+ };
+ remote: rc@8040 {
+ compatible = "amlogic, aml_remote";
+ reg = <0x0 0x8040 0x0 0x44>,
+ <0x0 0x8000 0x0 0x20>;
+ status = "okay";
+ protocol = <REMOTE_TYPE_NEC>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&remote_pins>;
+ map = <&custom_maps>;
+ max_frame_time = <200>;
+ };
+
+ meson_irblaster: irblaster@14c {
+ compatible = "amlogic, meson_irblaster";
+ reg = <0x0 0x14c 0x0 0x10>,
+ <0x0 0x40 0x0 0x4>;
+ interrupts = <0 198 1>;
+ status = "disabled";
+ };
+
+ i2c_AO: i2c@5000 {
+ compatible = "amlogic,meson-i2c";
+ status = "disabled";
+ reg = <0x0 0x05000 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-frequency = <100000>;
+ };
+
+ i2c_AO_slave:i2c_slave@6000 {
+ compatible = "amlogic, meson-i2c-slave";
+ status = "disabled";
+ reg = <0x0 0x6000 0x0 0x20>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names="default";
+ pinctrl-0=<&i2c_ao_slave_pins>;
+ };
+ };/* end of aobus */
+
+ ion_dev {
+ compatible = "amlogic, ion_dev";
+ status = "disabled";
+ memory-region = <&ion_cma_reserved>;
+ };/* end of ion_dev*/
+ }; /* end of soc*/
+
+ custom_maps: custom_maps {
+ mapnum = <3>;
+ map0 = <&map_0>;
+ map1 = <&map_1>;
+ map2 = <&map_2>;
+ map_0: map_0{
+ mapname = "amlogic-remote-1";
+ customcode = <0xfb04>;
+ release_delay = <80>;
+ size = <44>; /*keymap size*/
+ keymap = <REMOTE_KEY(0x01, KEY_1)
+ REMOTE_KEY(0x02, KEY_2)
+ REMOTE_KEY(0x03, KEY_3)
+ REMOTE_KEY(0x04, KEY_4)
+ REMOTE_KEY(0x05, KEY_5)
+ REMOTE_KEY(0x06, KEY_6)
+ REMOTE_KEY(0x07, KEY_7)
+ REMOTE_KEY(0x08, KEY_8)
+ REMOTE_KEY(0x09, KEY_9)
+ REMOTE_KEY(0x0a, KEY_0)
+ REMOTE_KEY(0x1F, KEY_FN_F1)
+ REMOTE_KEY(0x15, KEY_MENU)
+ REMOTE_KEY(0x16, KEY_TAB)
+ REMOTE_KEY(0x0c, KEY_CHANNELUP)
+ REMOTE_KEY(0x0d, KEY_CHANNELDOWN)
+ REMOTE_KEY(0x0e, KEY_VOLUMEUP)
+ REMOTE_KEY(0x0f, KEY_VOLUMEDOWN)
+ REMOTE_KEY(0x11, KEY_HOME)
+ REMOTE_KEY(0x1c, KEY_RIGHT)
+ REMOTE_KEY(0x1b, KEY_LEFT)
+ REMOTE_KEY(0x19, KEY_UP)
+ REMOTE_KEY(0x1a, KEY_DOWN)
+ REMOTE_KEY(0x1d, KEY_ENTER)
+ REMOTE_KEY(0x17, KEY_MUTE)
+ REMOTE_KEY(0x49, KEY_FINANCE)
+ REMOTE_KEY(0x43, KEY_BACK)
+ REMOTE_KEY(0x12, KEY_FN_F4)
+ REMOTE_KEY(0x14, KEY_FN_F5)
+ REMOTE_KEY(0x18, KEY_FN_F6)
+ REMOTE_KEY(0x59, KEY_INFO)
+ REMOTE_KEY(0x5a, KEY_STOPCD)
+ REMOTE_KEY(0x10, KEY_POWER)
+ REMOTE_KEY(0x42, KEY_PREVIOUSSONG)
+ REMOTE_KEY(0x44, KEY_NEXTSONG)
+ REMOTE_KEY(0x1e, KEY_REWIND)
+ REMOTE_KEY(0x4b, KEY_FASTFORWARD)
+ REMOTE_KEY(0x58, KEY_PLAYPAUSE)
+ REMOTE_KEY(0x46, KEY_PROPS)
+ REMOTE_KEY(0x40, KEY_UNDO)
+ REMOTE_KEY(0x38, KEY_SCROLLLOCK)
+ REMOTE_KEY(0x57, KEY_FN)
+ REMOTE_KEY(0x5b, KEY_FN_ESC)
+ REMOTE_KEY(0x13, 195)
+ REMOTE_KEY(0x54, KEY_RED)
+ REMOTE_KEY(0x4c, KEY_GREEN)
+ REMOTE_KEY(0x4e, KEY_YELLOW)
+ REMOTE_KEY(0x55, KEY_BLUE)
+ REMOTE_KEY(0x53, KEY_BLUETOOTH)
+ REMOTE_KEY(0x52, KEY_WLAN)
+ REMOTE_KEY(0x39, KEY_CAMERA)
+ REMOTE_KEY(0x41, KEY_SOUND)
+ REMOTE_KEY(0x0b, KEY_QUESTION)
+ REMOTE_KEY(0x00, KEY_CHAT)
+ REMOTE_KEY(0x13, KEY_SEARCH)>;
+ };
+
+ map_1: map_1{
+ mapname = "amlogic-remote-2";
+ customcode = <0xfe01>;
+ release_delay = <80>;
+ size = <53>;
+ keymap = <REMOTE_KEY(0x01, KEY_1)
+ REMOTE_KEY(0x02, KEY_2)
+ REMOTE_KEY(0x03, KEY_3)
+ REMOTE_KEY(0x04, KEY_4)
+ REMOTE_KEY(0x05, KEY_5)
+ REMOTE_KEY(0x06, KEY_6)
+ REMOTE_KEY(0x07, KEY_7)
+ REMOTE_KEY(0x08, KEY_8)
+ REMOTE_KEY(0x09, KEY_9)
+ REMOTE_KEY(0x0a, KEY_0)
+ REMOTE_KEY(0x1F, KEY_FN_F1)
+ REMOTE_KEY(0x15, KEY_MENU)
+ REMOTE_KEY(0x16, KEY_TAB)
+ REMOTE_KEY(0x0c, KEY_CHANNELUP)
+ REMOTE_KEY(0x0d, KEY_CHANNELDOWN)
+ REMOTE_KEY(0x0e, KEY_VOLUMEUP)
+ REMOTE_KEY(0x0f, KEY_VOLUMEDOWN)
+ REMOTE_KEY(0x11, KEY_HOME)
+ REMOTE_KEY(0x1c, KEY_RIGHT)
+ REMOTE_KEY(0x1b, KEY_LEFT)
+ REMOTE_KEY(0x19, KEY_UP)
+ REMOTE_KEY(0x1a, KEY_DOWN)
+ REMOTE_KEY(0x1d, KEY_ENTER)
+ REMOTE_KEY(0x17, KEY_MUTE)
+ REMOTE_KEY(0x49, KEY_FINANCE)
+ REMOTE_KEY(0x43, KEY_BACK)
+ REMOTE_KEY(0x12, KEY_FN_F4)
+ REMOTE_KEY(0x14, KEY_FN_F5)
+ REMOTE_KEY(0x18, KEY_FN_F6)
+ REMOTE_KEY(0x59, KEY_INFO)
+ REMOTE_KEY(0x5a, KEY_STOPCD)
+ REMOTE_KEY(0x10, KEY_POWER)
+ REMOTE_KEY(0x42, KEY_PREVIOUSSONG)
+ REMOTE_KEY(0x44, KEY_NEXTSONG)
+ REMOTE_KEY(0x1e, KEY_REWIND)
+ REMOTE_KEY(0x4b, KEY_FASTFORWARD)
+ REMOTE_KEY(0x58, KEY_PLAYPAUSE)
+ REMOTE_KEY(0x46, KEY_PROPS)
+ REMOTE_KEY(0x40, KEY_UNDO)
+ REMOTE_KEY(0x38, KEY_SCROLLLOCK)
+ REMOTE_KEY(0x57, KEY_FN)
+ REMOTE_KEY(0x5b, KEY_FN_ESC)
+ REMOTE_KEY(0x54, KEY_RED)
+ REMOTE_KEY(0x4c, KEY_GREEN)
+ REMOTE_KEY(0x4e, KEY_YELLOW)
+ REMOTE_KEY(0x55, KEY_BLUE)
+ REMOTE_KEY(0x53, KEY_BLUETOOTH)
+ REMOTE_KEY(0x52, KEY_WLAN)
+ REMOTE_KEY(0x39, KEY_CAMERA)
+ REMOTE_KEY(0x41, KEY_SOUND)
+ REMOTE_KEY(0x0b, KEY_QUESTION)
+ REMOTE_KEY(0x00, KEY_CHAT)
+ REMOTE_KEY(0x13, KEY_SEARCH)>;
+ };
+
+ map_2: map_2{
+ mapname = "amlogic-remote-3";
+ customcode = <0xbd02>;
+ release_delay = <80>;
+ size = <17>;
+ keymap = <REMOTE_KEY(0xca,KEY_UP)
+ REMOTE_KEY(0xd2,KEY_DOWN)
+ REMOTE_KEY(0x99,KEY_LEFT)
+ REMOTE_KEY(0xc1,KEY_RIGHT)
+ REMOTE_KEY(0xce,KEY_RIGHTCTRL)
+ REMOTE_KEY(0x45,KEY_POWER)
+ REMOTE_KEY(0xc5,KEY_COPY)
+ REMOTE_KEY(0x80,KEY_MUTE)
+ REMOTE_KEY(0xd0,KEY_TAB)
+ REMOTE_KEY(0xd6,KEY_LEFTMETA)
+ REMOTE_KEY(0x95,KEY_HOME)
+ REMOTE_KEY(0xdd,KEY_PAGEUP)
+ REMOTE_KEY(0x8c,KEY_PAGEDOWN)
+ REMOTE_KEY(0x89,KEY_UNDO)
+ REMOTE_KEY(0x9c,KEY_PROPS)
+ REMOTE_KEY(0x9a,KEY_SCALE)
+ REMOTE_KEY(0xcd,KEY_KPCOMMA)>;
+ };
+ };
+
+ uart_A: serial@ffd24000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xffd24000 0x0 0x18>;
+ interrupts = <0 26 1>;
+ status = "disabled";
+ clocks = <&xtal
+ &clkc CLKID_UART0>;
+ clock-names = "clk_uart",
+ "clk_gate";
+ fifosize = < 128 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&a_uart_pins>;
+ };
+
+ uart_B: serial@ffd23000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xffd23000 0x0 0x18>;
+ interrupts = <0 75 1>;
+ status = "disabled";
+ clocks = <&xtal
+ &clkc CLKID_UART1>;
+ clock-names = "clk_uart",
+ "clk_gate";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&b_uart_pins>;
+ };
+
+ uart_C: serial@ffd22000 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xffd22000 0x0 0x18>;
+ interrupts = <0 93 1>;
+ status = "disabled";
+ clocks = <&xtal
+ &clkc CLKID_UART1>;
+ clock-names = "clk_uart",
+ "clk_gate";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&c_uart_pins>;
+ };
+
+ sd_emmc_c: emmc@ffe07000 {
+ status = "disabled";
+ compatible = "amlogic, meson-mmc-tl1";
+ reg = <0x0 0xffe07000 0x0 0x800>;
+ interrupts = <0 191 1>;
+ pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
+ pinctrl-0 = <&emmc_clk_cmd_pins>;
+ pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_GP0_PLL>,
+ <&xtal>;
+ clock-names = "core","clkin0","clkin1","clkin2","clkin3","xtal";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ /* mmc-ddr-1_8v; */
+ /* mmc-hs200-1_8v; */
+
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ emmc {
+ pinname = "emmc";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ /*caps defined in dts*/
+ tx_delay = <0>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio BOOT_3 GPIO_ACTIVE_HIGH>;
+ hw_reset = <&gpio BOOT_12 GPIO_ACTIVE_HIGH>;
+ card_type = <1>;
+ /* 1:mmc card(include eMMC),
+ * 2:sd card(include tSD)
+ */
+ };
+ };
+
+
+ spifc: spifc@ffd14000 {
+ compatible = "amlogic,aml-spi-nor";
+ status = "disabled";
+
+ reg = <0x0 0xffd14000 0x0 0x80>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifc_all_pins>;
+ clock-names = "core";
+ clocks = <&clkc CLKID_CLK81>;
+
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ spifc-frequency = <40000000>;
+ read-capability = <4>;/* dual read 1_1_2 */
+ spifc-io-width = <4>;
+ };
+ };
+
+ slc_nand: nand-controller@0xFFE07800 {
+ compatible = "amlogic, aml_mtd_nand";
+ status = "disabled";
+ reg = <0x0 0xFFE07800 0x0 0x200>;
+ interrupts = <0 34 1>;
+
+ pinctrl-names = "nand_rb_mod", "nand_norb_mod", "nand_cs_only";
+ pinctrl-0 = <&all_nand_pins>;
+ pinctrl-1 = <&all_nand_pins>;
+ pinctrl-2 = <&nand_cs_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>;
+ clock-names = "core", "clkin";
+
+ device_id = <0>;
+ /*fip/tpl configurations, must be same
+ *with uboot if bl_mode was set as 1
+ *bl_mode: 0 compact mode;1 descrete mode
+ *if bl_mode was set as 1,fip configuration will work
+ */
+ bl_mode = <1>;
+ /*copy count of fip*/
+ fip_copies = <4>;
+ /*size of each fip copy*/
+ fip_size = <0x200000>;
+ nand_clk_ctrl = <0xFFE07000>;
+ /*partions defined in dts*/
+ };
+
+ mesonstream {
+ compatible = "amlogic, codec, streambuf";
+ status = "okay";
+ clocks = <&clkc CLKID_U_PARSER
+ &clkc CLKID_DEMUX
+ &clkc CLKID_AHB_ARB0
+ &clkc CLKID_CLK81
+ &clkc CLKID_DOS
+ &clkc CLKID_VDEC_MUX
+ &clkc CLKID_HCODEC_MUX
+ &clkc CLKID_HEVC_MUX
+ &clkc CLKID_HEVCF_MUX>;
+ clock-names = "parser_top",
+ "demux",
+ "ahbarb0",
+ "clk_81",
+ "vdec",
+ "clk_vdec_mux",
+ "clk_hcodec_mux",
+ "clk_hevc_mux",
+ "clk_hevcb_mux";
+ };
+
+ vcodec-dec {
+ compatible = "amlogic, vcodec-dec";
+ status = "okay";
+ };
+
+ vdec {
+ compatible = "amlogic, vdec";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 23 1
+ 0 32 1
+ 0 43 1
+ 0 44 1
+ 0 45 1>;
+ interrupt-names = "vsync",
+ "demux",
+ "parser",
+ "mailbox_0",
+ "mailbox_1",
+ "mailbox_2";
+ };
+
+ canvas: canvas {
+ compatible = "amlogic, meson, canvas";
+ status = "okay";
+ reg = <0x0 0xff638000 0x0 0x2000>;
+ };
+
+ codec_io: codec_io {
+ compatible = "amlogic, codec_io";
+ status = "okay";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_cbus_base{
+ reg = <0x0 0xffd00000 0x0 0x100000>;
+ };
+ io_dos_base{
+ reg = <0x0 0xff620000 0x0 0x10000>;
+ };
+ io_hiubus_base{
+ reg = <0x0 0xff63c000 0x0 0x2000>;
+ };
+ io_aobus_base{
+ reg = <0x0 0xff800000 0x0 0x10000>;
+ };
+ io_vcbus_base{
+ reg = <0x0 0xff900000 0x0 0x40000>;
+ };
+ io_dmc_base{
+ reg = <0x0 0xff638000 0x0 0x2000>;
+ };
+ io_efuse_base{
+ reg = <0x0 0xff630000 0x0 0x2000>;
+ };
+ };
+
+ rdma {
+ compatible = "amlogic, meson-tl1, rdma";
+ status = "okay";
+ interrupts = <0 89 1>;
+ interrupt-names = "rdma";
+ };
+
+ meson_fb: fb {
+ compatible = "amlogic, meson-tl1";
+ memory-region = <&logo_reserved>;
+ status = "disabled";
+ interrupts = <0 3 1
+ 0 56 1
+ 0 89 1>;
+ interrupt-names = "viu-vsync", "viu2-vsync", "rdma";
+ /* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x01851000*/
+ display_mode_default = "1080p60hz";
+ scale_mode = <1>;
+ /** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
+ display_size_default = <1920 1080 1920 2160 32>;
+ /*1920*1080*4*3 = 0x17BB000*/
+ clocks = <&clkc CLKID_VPU_CLKC_MUX>;
+ clock-names = "vpu_clkc";
+ };
+
+ ge2d {
+ compatible = "amlogic, ge2d-g12a";
+ status = "okay";
+ interrupts = <0 146 1>;
+ interrupt-names = "ge2d";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_G2D>,
+ <&clkc CLKID_GE2D_GATE>;
+ clock-names = "clk_vapb_0",
+ "clk_ge2d",
+ "clk_ge2d_gate";
+ reg = <0x0 0xff940000 0x0 0x10000>;
+ };
+
+ meson-amvideom {
+ compatible = "amlogic, amvideom";
+ status = "okay";
+ interrupts = <0 3 1>;
+ interrupt-names = "vsync";
+ };
+
+ ionvideo {
+ compatible = "amlogic, ionvideo";
+ status = "okay";
+ };
+
+ amlvideo {
+ compatible = "amlogic, amlvideo";
+ status = "okay";
+ };
+
+ vdac {
+ compatible = "amlogic, vdac-tl1";
+ status = "okay";
+ };
+
+ ddr_bandwidth {
+ compatible = "amlogic, ddr-bandwidth";
+ status = "disabled";
+ reg = <0x0 0xff638000 0x0 0x100
+ 0x0 0xff638c00 0x0 0x100>;
+ interrupts = <0 52 1>;
+ interrupt-names = "ddr_bandwidth";
+ };
+
+ dmc_monitor {
+ compatible = "amlogic, dmc_monitor";
+ status = "disabled";
+ reg_base = <0xff638800>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ efuse: efuse{
+ compatible = "amlogic, efuse";
+ read_cmd = <0x82000030>;
+ write_cmd = <0x82000031>;
+ get_max_cmd = <0x82000033>;
+ key = <&efusekey>;
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "efuse_clk";
+ status = "disabled";
+ };
+
+ efusekey:efusekey{
+ keynum = <4>;
+ key0 = <&key_0>;
+ key1 = <&key_1>;
+ key2 = <&key_2>;
+ key3 = <&key_3>;
+ key_0:key_0{
+ keyname = "mac";
+ offset = <0>;
+ size = <6>;
+ };
+ key_1:key_1{
+ keyname = "mac_bt";
+ offset = <6>;
+ size = <6>;
+ };
+ key_2:key_2{
+ keyname = "mac_wifi";
+ offset = <12>;
+ size = <6>;
+ };
+ key_3:key_3{
+ keyname = "usid";
+ offset = <18>;
+ size = <16>;
+ };
+ };
+
+ audio_data: audio_data {
+ compatible = "amlogic, audio_data";
+ query_licence_cmd = <0x82000050>;
+ status = "disabled";
+ };
+
+ defendkey: defendkey {
+ compatible = "amlogic, defendkey";
+ mem_size = <0 0x100000>;
+ status = "okay";
+ };
+ cpu_ver_name {
+ compatible = "amlogic, cpu-major-id-tm2";
+ };
+}; /* end of / */
+
+&pinctrl_aobus {
+ sd_to_ao_uart_clr_pins: sd_to_ao_uart_clr_pins {
+ mux {
+ groups = "GPIOAO_0",
+ "GPIOAO_1",
+ "GPIOAO_2",
+ "GPIOAO_3",
+ "GPIOAO_4",
+ "GPIOAO_5",
+ "GPIOAO_6",
+ "GPIOAO_7",
+ "GPIOAO_8",
+ "GPIOAO_9",
+ "GPIOAO_10",
+ "GPIOAO_11",
+ "GPIOE_0",
+ "GPIOE_1",
+ "GPIOE_2",
+ "GPIO_TEST_N";
+ function = "gpio_aobus";
+ };
+ };
+
+ sd_to_ao_uart_pins: sd_to_ao_uart_pins {
+ mux {
+ groups = "uart_ao_a_tx",
+ "uart_ao_a_rx",
+ "uart_ao_a_cts",
+ "uart_ao_a_rts";
+ function = "uart_ao_a";
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ remote_pins:remote_pin {
+ mux {
+ groups = "remote_input_ao";
+ function = "remote_input_ao";
+ };
+ };
+
+ pwm_ao_a_pins: pwm_ao_a {
+ mux {
+ groups = "pwm_ao_a";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_a_hiz_pins: pwm_ao_a_hiz {
+ mux {
+ groups = "pwm_ao_a_hiz";
+ function = "pwm_ao_a";
+ };
+ };
+
+ pwm_ao_b_pins: pwm_ao_b {
+ mux {
+ groups = "pwm_ao_b";
+ function = "pwm_ao_b";
+ };
+ };
+
+ pwm_ao_c_pins1: pwm_ao_c_pins1 {
+ mux {
+ groups = "pwm_ao_c_4";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_c_pins2: pwm_ao_c_pins2 {
+ mux {
+ groups = "pwm_ao_c_6";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_c_hiz_pins1: pwm_ao_c_hiz1 {
+ mux {
+ groups = "pwm_ao_c_hiz_4";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_c_hiz_pins2: pwm_ao_c_hiz2 {
+ mux {
+ groups = "pwm_ao_c_hiz_7";
+ function = "pwm_ao_c";
+ };
+ };
+
+ pwm_ao_d_pins1: pwm_ao_d_pins1 {
+ mux {
+ groups = "pwm_ao_d_5";
+ function = "pwm_ao_d";
+ };
+ };
+
+ pwm_ao_d_pins2: pwm_ao_d_pins2 {
+ mux {
+ groups = "pwm_ao_d_10";
+ function = "pwm_ao_d";
+ };
+ };
+
+ pwm_ao_d_pins3: pwm_ao_d_pins3 {
+ mux {
+ groups = "pwm_ao_d_e";
+ function = "pwm_ao_d";
+ };
+ };
+
+ pwm_a_e2: pwm_a_e2 {
+ mux {
+ groups = "pwm_a_e2";
+ function = "pwm_a_e2";
+ };
+ };
+
+ i2c_ao_2_pins:i2c_ao_2 {
+ mux {
+ groups = "i2c_ao_sck_2",
+ "i2c_ao_sda_3";
+ function = "i2c_ao";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c_ao_e_pins:i2c_ao_e {
+ mux {
+ groups = "i2c_ao_sck_e",
+ "i2c_ao_sda_e";
+ function = "i2c_ao";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c_ao_slave_pins:i2c_ao_slave {
+ mux {
+ groups = "i2c_ao_slave_sck",
+ "i2c_ao_slave_sda";
+ function = "i2c_ao_slave";
+ };
+ };
+
+ ao_uart_pins:ao_uart {
+ mux {
+ groups = "uart_ao_a_rx",
+ "uart_ao_a_tx";
+ function = "uart_ao_a";
+ };
+ };
+
+ ao_b_uart_pins1:ao_b_uart1 {
+ mux {
+ groups = "uart_ao_b_tx_2",
+ "uart_ao_b_rx_3";
+ function = "uart_ao_b";
+ };
+ };
+
+ ao_b_uart_pins2:ao_b_uart2 {
+ mux {
+ groups = "uart_ao_b_tx_8",
+ "uart_ao_b_rx_9";
+ function = "uart_ao_b";
+ };
+ };
+
+ irblaster_pins:irblaster_pin {
+ mux {
+ groups = "remote_out_ao";
+ function = "remote_out_ao";
+ };
+ };
+
+ irblaster_pins1:irblaster_pin1 {
+ mux {
+ groups = "remote_out_ao9";
+ function = "remote_out_ao";
+ };
+ };
+
+ jtag_apao_pins:jtag_apao_pin {
+ mux {
+ groups = "jtag_a_tdi",
+ "jtag_a_tdo",
+ "jtag_a_clk",
+ "jtag_a_tms";
+ function = "jtag_a";
+ };
+ };
+};
+
+&pinctrl_periphs {
+ /* sdemmc portC */
+ emmc_clk_cmd_pins: emmc_clk_cmd_pins {
+ mux {
+ groups = "emmc_clk",
+ "emmc_cmd";
+ function = "emmc";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ emmc_conf_pull_up: emmc_conf_pull_up {
+ mux {
+ groups = "emmc_nand_d7",
+ "emmc_nand_d6",
+ "emmc_nand_d5",
+ "emmc_nand_d4",
+ "emmc_nand_d3",
+ "emmc_nand_d2",
+ "emmc_nand_d1",
+ "emmc_nand_d0",
+ "emmc_clk",
+ "emmc_cmd";
+ function = "emmc";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ emmc_conf_pull_done: emmc_conf_pull_done {
+ mux {
+ groups = "emmc_nand_ds";
+ function = "emmc";
+ input-enable;
+ bias-pull-down;
+ drive-strength = <3>;
+ };
+ };
+
+ /* sdemmc portB */
+ sd_clk_cmd_pins: sd_clk_cmd_pins {
+ mux {
+ groups = "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ sd_all_pins: sd_all_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ sd_1bit_pins: sd_1bit_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ ao_to_sd_uart_pins: ao_to_sd_uart_pins {
+ mux {
+ groups ="uart_ao_a_rx_w3",
+ "uart_ao_a_tx_w2",
+ "uart_ao_a_rx_w7",
+ "uart_ao_a_tx_w6",
+ "uart_ao_a_rx_w11",
+ "uart_ao_a_tx_w10";
+ function = "uart_ao_a_ee";
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ all_nand_pins: all_nand_pins {
+ mux {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "nand_ce0",
+ "nand_ale",
+ "nand_cle",
+ "nand_wen_clk",
+ "nand_ren_wr";
+ function = "nand";
+ input-enable;
+ drive-strength = <3>;
+ };
+ };
+
+ nand_cs_pins:nand_cs {
+ mux {
+ groups = "nand_ce0";
+ function = "nand";
+ drive-strength = <3>;
+ };
+ };
+
+ /* sdemmc port */
+ sdio_clk_cmd_pins: sdio_clk_cmd_pins {
+ mux {
+ groups = "sdcard_clk",
+ "sdcard_cmd";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ sdio_all_pins: sdio_all_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_clk",
+ "sdcard_cmd";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ spifc_cs_pin:spifc_cs_pin {
+ mux {
+ groups = "nor_cs";
+ function = "nor";
+ bias-pull-up;
+ };
+ };
+
+ spifc_pulldown: spifc_pulldown {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c";
+ function = "nor";
+ bias-pull-down;
+ };
+ };
+
+ spifc_pullup: spifc_pullup {
+ mux {
+ groups = "nor_cs";
+ function = "nor";
+ bias-pull-up;
+ };
+ };
+
+ spifc_all_pins: spifc_all_pins {
+ mux {
+ groups = "nor_d",
+ "nor_q",
+ "nor_c",
+ "nor_hold",
+ "nor_wp";
+ function = "nor";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ pwm_a_pins: pwm_a {
+ mux {
+ groups = "pwm_a";
+ function = "pwm_a";
+ };
+ };
+
+ pwm_b_pins1: pwm_b_pins1 {
+ mux {
+ groups = "pwm_b_c";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_b_pins2: pwm_b_pins2 {
+ mux {
+ groups = "pwm_b_z";
+ function = "pwm_b";
+ };
+ };
+
+ pwm_c_pins1: pwm_c_pins1 {
+ mux {
+ groups = "pwm_c_dv";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_c_pins2: pwm_c_pins2 {
+ mux {
+ groups = "pwm_c_h";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_c_pins3: pwm_c_pins3 {
+ mux {
+ groups = "pwm_c_z";
+ function = "pwm_c";
+ };
+ };
+
+ pwm_d_pins1: pwm_d_pins1 {
+ mux {
+ groups = "pwm_d_dv";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_d_pins2: pwm_d_pins2 {
+ mux {
+ groups = "pwm_d_z";
+ function = "pwm_d";
+ };
+ };
+
+ pwm_e_pins1: pwm_e1 {
+ mux {
+ groups = "pwm_e_dv";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_e_pins2: pwm_e2 {
+ mux {
+ groups = "pwm_e_z";
+ function = "pwm_e";
+ };
+ };
+
+ pwm_f_pins1: pwm_f_pins1 {
+ mux {
+ groups = "pwm_f_dv";
+ function = "pwm_f";
+ };
+ };
+
+ pwm_f_pins2: pwm_f_pins2 {
+ mux {
+ groups = "pwm_f_z";
+ function = "pwm_f";
+ };
+ };
+
+ i2c0_c_pins:i2c0_c {
+ mux {
+ groups = "i2c0_sda_c",
+ "i2c0_sck_c";
+ function = "i2c0";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c0_dv_pins:i2c0_dv {
+ mux {
+ groups = "i2c0_sda_dv",
+ "i2c0_sck_dv";
+ function = "i2c0";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c1_z_pins:i2c1_z {
+ mux {
+ groups = "i2c1_sda_z",
+ "i2c1_sck_z";
+ function = "i2c1";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c1_h_pins:i2c1_h {
+ mux {
+ groups = "i2c1_sda_h",
+ "i2c1_sck_h";
+ function = "i2c1";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c2_h_pins:i2c2_h {
+ mux {
+ groups = "i2c2_sda_h",
+ "i2c2_sck_h";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c2_z_pins:i2c2_z {
+ mux {
+ groups = "i2c2_sda_z",
+ "i2c2_sck_z";
+ function = "i2c2";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_h1_pins:i2c3_h1 {
+ mux {
+ groups = "i2c3_sda_h1",
+ "i2c3_sck_h0";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_h20_pins:i2c3_h3 {
+ mux {
+ groups = "i2c3_sda_h20",
+ "i2c3_sck_h19";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_dv_pins:i2c3_dv {
+ mux {
+ groups = "i2c3_sda_dv",
+ "i2c3_sck_dv";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ i2c3_c_pins:i2c3_c {
+ mux {
+ groups = "i2c3_sda_c",
+ "i2c3_sck_c";
+ function = "i2c3";
+ bias-pull-up;
+ drive-strength = <3>;
+ };
+ };
+
+ spicc0_pins_h: spicc0_pins_h {
+ mux {
+ groups = "spi0_mosi_h",
+ "spi0_miso_h",
+ "spi0_clk_h";
+ function = "spi0";
+ drive-strength = <1>;
+ };
+ };
+
+ spicc1_pins_dv: spicc1_pins_dv {
+ mux {
+ groups = "spi1_mosi_dv",
+ "spi1_miso_dv",
+ "spi1_clk_dv";
+ function = "spi1";
+ drive-strength = <1>;
+ };
+ };
+
+ internal_eth_pins: internal_eth_pins {
+ mux {
+ groups = "eth_link_led",
+ "eth_act_led";
+ function = "eth";
+ };
+ };
+
+ internal_gpio_pins: internal_gpio_pins {
+ mux {
+ groups = "GPIOZ_14",
+ "GPIOZ_15";
+ function = "gpio_periphs";
+ bias-disable;
+ input-enable;
+ };
+ };
+
+ external_eth_pins: external_eth_pins {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_rgmii_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen",
+ "eth_txd0",
+ "eth_txd1",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ drive-strength = <3>;
+ };
+ };
+
+ a_uart_pins:a_uart {
+ mux {
+ groups = "uart_a_tx",
+ "uart_a_rx",
+ "uart_a_cts",
+ "uart_a_rts";
+ function = "uart_a";
+ };
+ };
+
+ b_uart_pins:b_uart {
+ mux {
+ groups = "uart_b_tx",
+ "uart_b_rx";
+ function = "uart_b";
+ };
+ };
+
+ c_uart_pins:c_uart {
+ mux {
+ groups = "uart_c_tx",
+ "uart_c_rx";
+ function = "uart_c";
+ };
+ };
+
+ atvdemod_agc_pins: atvdemod_agc_pins {
+ mux {
+ groups = "atv_if_agc_dv";
+ function = "atv";
+ };
+ };
+
+ dtvdemod_agc_pins: dtvdemod_agc_pins {
+ mux {
+ groups = "dtv_if_agc_dv2";
+ function = "dtv";
+ };
+ };
+
+ lcd_vbyone_pins: lcd_vbyone_pin {
+ mux {
+ groups = "vx1_lockn","vx1_htpdn";
+ function = "vx1";
+ };
+ };
+ lcd_vbyone_off_pins: lcd_vbyone_off_pin {
+ mux {
+ groups = "GPIOH_15","GPIOH_16";
+ function = "gpio_periphs";
+ input-enable;
+ };
+ };
+
+ lcd_tcon_pins: lcd_tcon_pin {
+ mux {
+ groups = "tcon_0","tcon_1","tcon_2","tcon_3",
+ "tcon_4","tcon_5","tcon_6","tcon_7",
+ "tcon_8","tcon_9","tcon_10","tcon_11",
+ "tcon_12","tcon_13","tcon_14","tcon_15",
+ "tcon_lock","tcon_spi_mo","tcon_spi_mi",
+ "tcon_spi_clk","tcon_spi_ss";
+ function = "tcon";
+ };
+ };
+ lcd_tcon_off_pins: lcd_tcon_off_pin {
+ mux {
+ groups = "GPIOH_0","GPIOH_1","GPIOH_2","GPIOH_3",
+ "GPIOH_4","GPIOH_5","GPIOH_6","GPIOH_7",
+ "GPIOH_8","GPIOH_9","GPIOH_10","GPIOH_11",
+ "GPIOH_12","GPIOH_13","GPIOH_14","GPIOH_15",
+ "GPIOH_16","GPIOH_17","GPIOH_18","GPIOH_19",
+ "GPIOH_20";
+ function = "gpio_periphs";
+ input-enable;
+ };
+ };
+};
+
+&gpu{
+ tbl = <&dvfs285_cfg
+ &dvfs400_cfg
+ &dvfs500_cfg
+ &dvfs666_cfg
+ &dvfs800_cfg
+ &dvfs800_cfg>;
+};