arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E

UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have
the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY
pins.

After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), the delays are working correctly, however, "rgmii" means
no delay and the phy doesn't work. So need to set the phy-mode to
"rgmii-id" to show that RX/TX delays are enabled.

Fixes: c73730ee4c9a ("arm64: dts: uniphier: add AVE ethernet node")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a87b8a6..8f2c1c1 100644 (file)
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -734,7 +734,7 @@
                        clocks = <&sys_clk 6>;
                        reset-names = "ether";
                        resets = <&sys_rst 6>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-id";
                        local-mac-address = [00 00 00 00 00 00];
                        socionext,syscon-phy-mode = <&soc_glue 0>;
 

diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 0e52dad..be97da1 100644 (file)
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -564,7 +564,7 @@
                        clocks = <&sys_clk 6>;
                        reset-names = "ether";
                        resets = <&sys_rst 6>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-id";
                        local-mac-address = [00 00 00 00 00 00];
                        socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -585,7 +585,7 @@
                        clocks = <&sys_clk 7>;
                        reset-names = "ether";
                        resets = <&sys_rst 7>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-id";
                        local-mac-address = [00 00 00 00 00 00];
                        socionext,syscon-phy-mode = <&soc_glue 1>;