MIPS: Alchemy: irq code and constant cleanup
authorManuel Lauss <manuel.lauss@googlemail.com>
Sun, 8 May 2011 08:42:14 +0000 (10:42 +0200)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 19 May 2011 08:55:45 +0000 (09:55 +0100)
replace au_readl/au_writel with __raw_readl/__raw_writel,
and clean up IC-related stuff from the headers.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/alchemy/common/irq.c
arch/mips/include/asm/mach-au1x00/au1000.h

index 55dd7c8..b72e128 100644 (file)
 #include <asm/mach-pb1x00/pb1000.h>
 #endif
 
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD      0x40
+#define IC_CFG0SET     0x40
+#define IC_CFG0CLR     0x44
+#define IC_CFG1RD      0x48
+#define IC_CFG1SET     0x48
+#define IC_CFG1CLR     0x4C
+#define IC_CFG2RD      0x50
+#define IC_CFG2SET     0x50
+#define IC_CFG2CLR     0x54
+#define IC_REQ0INT     0x54
+#define IC_SRCRD       0x58
+#define IC_SRCSET      0x58
+#define IC_SRCCLR      0x5C
+#define IC_REQ1INT     0x5C
+#define IC_ASSIGNRD    0x60
+#define IC_ASSIGNSET   0x60
+#define IC_ASSIGNCLR   0x64
+#define IC_WAKERD      0x68
+#define IC_WAKESET     0x68
+#define IC_WAKECLR     0x6C
+#define IC_MASKRD      0x70
+#define IC_MASKSET     0x70
+#define IC_MASKCLR     0x74
+#define IC_RISINGRD    0x78
+#define IC_RISINGCLR   0x78
+#define IC_FALLINGRD   0x7C
+#define IC_FALLINGCLR  0x7C
+#define IC_TESTBIT     0x80
+
 static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
 
 /* NOTE on interrupt priorities: The original writers of this code said:
@@ -221,89 +251,101 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = {
 static void au1x_ic0_unmask(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
-       au_writel(1 << bit, IC0_MASKSET);
-       au_writel(1 << bit, IC0_WAKESET);
-       au_sync();
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+       __raw_writel(1 << bit, base + IC_MASKSET);
+       __raw_writel(1 << bit, base + IC_WAKESET);
+       wmb();
 }
 
 static void au1x_ic1_unmask(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
-       au_writel(1 << bit, IC1_MASKSET);
-       au_writel(1 << bit, IC1_WAKESET);
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+       __raw_writel(1 << bit, base + IC_MASKSET);
+       __raw_writel(1 << bit, base + IC_WAKESET);
 
 /* very hacky. does the pb1000 cpld auto-disable this int?
  * nowhere in the current kernel sources is it disabled.       --mlau
  */
 #if defined(CONFIG_MIPS_PB1000)
        if (d->irq == AU1000_GPIO15_INT)
-               au_writel(0x4000, PB1000_MDR); /* enable int */
+               __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
 #endif
-       au_sync();
+       wmb();
 }
 
 static void au1x_ic0_mask(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
-       au_writel(1 << bit, IC0_MASKCLR);
-       au_writel(1 << bit, IC0_WAKECLR);
-       au_sync();
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+       __raw_writel(1 << bit, base + IC_MASKCLR);
+       __raw_writel(1 << bit, base + IC_WAKECLR);
+       wmb();
 }
 
 static void au1x_ic1_mask(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
-       au_writel(1 << bit, IC1_MASKCLR);
-       au_writel(1 << bit, IC1_WAKECLR);
-       au_sync();
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+       __raw_writel(1 << bit, base + IC_MASKCLR);
+       __raw_writel(1 << bit, base + IC_WAKECLR);
+       wmb();
 }
 
 static void au1x_ic0_ack(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 
        /*
         * This may assume that we don't get interrupts from
         * both edges at once, or if we do, that we don't care.
         */
-       au_writel(1 << bit, IC0_FALLINGCLR);
-       au_writel(1 << bit, IC0_RISINGCLR);
-       au_sync();
+       __raw_writel(1 << bit, base + IC_FALLINGCLR);
+       __raw_writel(1 << bit, base + IC_RISINGCLR);
+       wmb();
 }
 
 static void au1x_ic1_ack(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 
        /*
         * This may assume that we don't get interrupts from
         * both edges at once, or if we do, that we don't care.
         */
-       au_writel(1 << bit, IC1_FALLINGCLR);
-       au_writel(1 << bit, IC1_RISINGCLR);
-       au_sync();
+       __raw_writel(1 << bit, base + IC_FALLINGCLR);
+       __raw_writel(1 << bit, base + IC_RISINGCLR);
+       wmb();
 }
 
 static void au1x_ic0_maskack(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 
-       au_writel(1 << bit, IC0_WAKECLR);
-       au_writel(1 << bit, IC0_MASKCLR);
-       au_writel(1 << bit, IC0_RISINGCLR);
-       au_writel(1 << bit, IC0_FALLINGCLR);
-       au_sync();
+       __raw_writel(1 << bit, base + IC_WAKECLR);
+       __raw_writel(1 << bit, base + IC_MASKCLR);
+       __raw_writel(1 << bit, base + IC_RISINGCLR);
+       __raw_writel(1 << bit, base + IC_FALLINGCLR);
+       wmb();
 }
 
 static void au1x_ic1_maskack(struct irq_data *d)
 {
        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+       void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 
-       au_writel(1 << bit, IC1_WAKECLR);
-       au_writel(1 << bit, IC1_MASKCLR);
-       au_writel(1 << bit, IC1_RISINGCLR);
-       au_writel(1 << bit, IC1_FALLINGCLR);
-       au_sync();
+       __raw_writel(1 << bit, base + IC_WAKECLR);
+       __raw_writel(1 << bit, base + IC_MASKCLR);
+       __raw_writel(1 << bit, base + IC_RISINGCLR);
+       __raw_writel(1 << bit, base + IC_FALLINGCLR);
+       wmb();
 }
 
 static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
@@ -318,13 +360,13 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
                return -EINVAL;
 
        local_irq_save(flags);
-       wakemsk = au_readl(SYS_WAKEMSK);
+       wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK);
        if (on)
                wakemsk |= 1 << bit;
        else
                wakemsk &= ~(1 << bit);
-       au_writel(wakemsk, SYS_WAKEMSK);
-       au_sync();
+       __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK);
+       wmb();
        local_irq_restore(flags);
 
        return 0;
@@ -356,81 +398,74 @@ static struct irq_chip au1x_ic1_chip = {
 static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
 {
        struct irq_chip *chip;
-       unsigned long icr[6];
-       unsigned int bit, ic, irq = d->irq;
+       unsigned int bit, irq = d->irq;
        irq_flow_handler_t handler = NULL;
        unsigned char *name = NULL;
+       void __iomem *base;
        int ret;
 
        if (irq >= AU1000_INTC1_INT_BASE) {
                bit = irq - AU1000_INTC1_INT_BASE;
                chip = &au1x_ic1_chip;
-               ic = 1;
+               base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
        } else {
                bit = irq - AU1000_INTC0_INT_BASE;
                chip = &au1x_ic0_chip;
-               ic = 0;
+               base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
        }
 
        if (bit > 31)
                return -EINVAL;
 
-       icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
-       icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
-       icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
-       icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
-       icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
-       icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
-
        ret = 0;
 
        switch (flow_type) {    /* cfgregs 2:1:0 */
        case IRQ_TYPE_EDGE_RISING:      /* 0:0:1 */
-               au_writel(1 << bit, icr[5]);
-               au_writel(1 << bit, icr[4]);
-               au_writel(1 << bit, icr[0]);
+               __raw_writel(1 << bit, base + IC_CFG2CLR);
+               __raw_writel(1 << bit, base + IC_CFG1CLR);
+               __raw_writel(1 << bit, base + IC_CFG0SET);
                handler = handle_edge_irq;
                name = "riseedge";
                break;
        case IRQ_TYPE_EDGE_FALLING:     /* 0:1:0 */
-               au_writel(1 << bit, icr[5]);
-               au_writel(1 << bit, icr[1]);
-               au_writel(1 << bit, icr[3]);
+               __raw_writel(1 << bit, base + IC_CFG2CLR);
+               __raw_writel(1 << bit, base + IC_CFG1SET);
+               __raw_writel(1 << bit, base + IC_CFG0CLR);
                handler = handle_edge_irq;
                name = "falledge";
                break;
        case IRQ_TYPE_EDGE_BOTH:        /* 0:1:1 */
-               au_writel(1 << bit, icr[5]);
-               au_writel(1 << bit, icr[1]);
-               au_writel(1 << bit, icr[0]);
+               __raw_writel(1 << bit, base + IC_CFG2CLR);
+               __raw_writel(1 << bit, base + IC_CFG1SET);
+               __raw_writel(1 << bit, base + IC_CFG0SET);
                handler = handle_edge_irq;
                name = "bothedge";
                break;
        case IRQ_TYPE_LEVEL_HIGH:       /* 1:0:1 */
-               au_writel(1 << bit, icr[2]);
-               au_writel(1 << bit, icr[4]);
-               au_writel(1 << bit, icr[0]);
+               __raw_writel(1 << bit, base + IC_CFG2SET);
+               __raw_writel(1 << bit, base + IC_CFG1CLR);
+               __raw_writel(1 << bit, base + IC_CFG0SET);
                handler = handle_level_irq;
                name = "hilevel";
                break;
        case IRQ_TYPE_LEVEL_LOW:        /* 1:1:0 */
-               au_writel(1 << bit, icr[2]);
-               au_writel(1 << bit, icr[1]);
-               au_writel(1 << bit, icr[3]);
+               __raw_writel(1 << bit, base + IC_CFG2SET);
+               __raw_writel(1 << bit, base + IC_CFG1SET);
+               __raw_writel(1 << bit, base + IC_CFG0CLR);
                handler = handle_level_irq;
                name = "lowlevel";
                break;
        case IRQ_TYPE_NONE:             /* 0:0:0 */
-               au_writel(1 << bit, icr[5]);
-               au_writel(1 << bit, icr[4]);
-               au_writel(1 << bit, icr[3]);
+               __raw_writel(1 << bit, base + IC_CFG2CLR);
+               __raw_writel(1 << bit, base + IC_CFG1CLR);
+               __raw_writel(1 << bit, base + IC_CFG0CLR);
                break;
        default:
                ret = -EINVAL;
        }
        __irq_set_chip_handler_name_locked(d->irq, chip, handler, name);
 
-       au_sync();
+       wmb();
 
        return ret;
 }
@@ -444,21 +479,21 @@ asmlinkage void plat_irq_dispatch(void)
                off = MIPS_CPU_IRQ_BASE + 7;
                goto handle;
        } else if (pending & CAUSEF_IP2) {
-               s = IC0_REQ0INT;
+               s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
                off = AU1000_INTC0_INT_BASE;
        } else if (pending & CAUSEF_IP3) {
-               s = IC0_REQ1INT;
+               s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
                off = AU1000_INTC0_INT_BASE;
        } else if (pending & CAUSEF_IP4) {
-               s = IC1_REQ0INT;
+               s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
                off = AU1000_INTC1_INT_BASE;
        } else if (pending & CAUSEF_IP5) {
-               s = IC1_REQ1INT;
+               s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
                off = AU1000_INTC1_INT_BASE;
        } else
                goto spurious;
 
-       s = au_readl(s);
+       s = __raw_readl((void __iomem *)s);
        if (unlikely(!s)) {
 spurious:
                spurious_interrupt();
@@ -469,48 +504,42 @@ handle:
        do_IRQ(off);
 }
 
+
+static inline void ic_init(void __iomem *base)
+{
+       /* initialize interrupt controller to a safe state */
+       __raw_writel(0xffffffff, base + IC_CFG0CLR);
+       __raw_writel(0xffffffff, base + IC_CFG1CLR);
+       __raw_writel(0xffffffff, base + IC_CFG2CLR);
+       __raw_writel(0xffffffff, base + IC_MASKCLR);
+       __raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+       __raw_writel(0xffffffff, base + IC_WAKECLR);
+       __raw_writel(0xffffffff, base + IC_SRCSET);
+       __raw_writel(0xffffffff, base + IC_FALLINGCLR);
+       __raw_writel(0xffffffff, base + IC_RISINGCLR);
+       __raw_writel(0x00000000, base + IC_TESTBIT);
+       wmb();
+}
+
 static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 {
        unsigned int bit, irq_nr;
-       int i;
-
-       /*
-        * Initialize interrupt controllers to a safe state.
-        */
-       au_writel(0xffffffff, IC0_CFG0CLR);
-       au_writel(0xffffffff, IC0_CFG1CLR);
-       au_writel(0xffffffff, IC0_CFG2CLR);
-       au_writel(0xffffffff, IC0_MASKCLR);
-       au_writel(0xffffffff, IC0_ASSIGNCLR);
-       au_writel(0xffffffff, IC0_WAKECLR);
-       au_writel(0xffffffff, IC0_SRCSET);
-       au_writel(0xffffffff, IC0_FALLINGCLR);
-       au_writel(0xffffffff, IC0_RISINGCLR);
-       au_writel(0x00000000, IC0_TESTBIT);
-
-       au_writel(0xffffffff, IC1_CFG0CLR);
-       au_writel(0xffffffff, IC1_CFG1CLR);
-       au_writel(0xffffffff, IC1_CFG2CLR);
-       au_writel(0xffffffff, IC1_MASKCLR);
-       au_writel(0xffffffff, IC1_ASSIGNCLR);
-       au_writel(0xffffffff, IC1_WAKECLR);
-       au_writel(0xffffffff, IC1_SRCSET);
-       au_writel(0xffffffff, IC1_FALLINGCLR);
-       au_writel(0xffffffff, IC1_RISINGCLR);
-       au_writel(0x00000000, IC1_TESTBIT);
+       void __iomem *base;
 
+       ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+       ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
        mips_cpu_irq_init();
 
        /* register all 64 possible IC0+IC1 irq sources as type "none".
         * Use set_irq_type() to set edge/level behaviour at runtime.
         */
-       for (i = AU1000_INTC0_INT_BASE;
-            (i < AU1000_INTC0_INT_BASE + 32); i++)
-               au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+       for (irq_nr = AU1000_INTC0_INT_BASE;
+            (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+               au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
 
-       for (i = AU1000_INTC1_INT_BASE;
-            (i < AU1000_INTC1_INT_BASE + 32); i++)
-               au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+       for (irq_nr = AU1000_INTC1_INT_BASE;
+            (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+               au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
 
        /*
         * Initialize IC0, which is fixed per processor.
@@ -520,13 +549,13 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 
                if (irq_nr >= AU1000_INTC1_INT_BASE) {
                        bit = irq_nr - AU1000_INTC1_INT_BASE;
-                       if (map->im_request)
-                               au_writel(1 << bit, IC1_ASSIGNSET);
+                       base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
                } else {
                        bit = irq_nr - AU1000_INTC0_INT_BASE;
-                       if (map->im_request)
-                               au_writel(1 << bit, IC0_ASSIGNSET);
+                       base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
                }
+               if (map->im_request)
+                       __raw_writel(1 << bit, base + IC_ASSIGNSET);
 
                au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
                ++map;
@@ -583,17 +612,8 @@ static int alchemy_ic_resume(struct sys_device *dev)
        struct alchemy_ic_sysdev *icdev =
                        container_of(dev, struct alchemy_ic_sysdev, sysdev);
 
-       __raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
-       __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
-       __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
-       __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
-       __raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
-       __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
-       __raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
-       __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
-       __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
-       __raw_writel(0x00000000, icdev->base + IC_TESTBIT);
-       wmb();
+       ic_init(icdev->base);
+
        __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
        __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
        __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
@@ -617,7 +637,7 @@ static struct sysdev_class alchemy_ic_sysdev_class = {
 static int __init alchemy_ic_sysdev_init(void)
 {
        struct alchemy_ic_sysdev *icdev;
-       unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
+       unsigned long icbase[2] = { AU1000_IC0_PHYS_ADDR, AU1000_IC1_PHYS_ADDR };
        int err, i;
 
        err = sysdev_class_register(&alchemy_ic_sysdev_class);
index a697661..66cfcdc 100644 (file)
@@ -630,8 +630,13 @@ enum soc_au1200_ints {
 
 /*
  * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
  */
 
+#define AU1000_IC0_PHYS_ADDR           0x10400000 /* 01234 */
+#define AU1000_IC1_PHYS_ADDR           0x11800000 /* 01234 */
+
+
 #ifdef CONFIG_SOC_AU1000
 #define        MEM_PHYS_ADDR           0x14000000
 #define        STATIC_MEM_PHYS_ADDR    0x14001000
@@ -643,8 +648,6 @@ enum soc_au1200_ints {
 #define        DMA5_PHYS_ADDR          0x14002500
 #define        DMA6_PHYS_ADDR          0x14002600
 #define        DMA7_PHYS_ADDR          0x14002700
-#define        IC0_PHYS_ADDR           0x10400000
-#define        IC1_PHYS_ADDR           0x11800000
 #define        AC97_PHYS_ADDR          0x10000000
 #define        USBH_PHYS_ADDR          0x10100000
 #define        USBD_PHYS_ADDR          0x10200000
@@ -680,8 +683,6 @@ enum soc_au1200_ints {
 #define        DMA5_PHYS_ADDR          0x14002500
 #define        DMA6_PHYS_ADDR          0x14002600
 #define        DMA7_PHYS_ADDR          0x14002700
-#define        IC0_PHYS_ADDR           0x10400000
-#define        IC1_PHYS_ADDR           0x11800000
 #define        AC97_PHYS_ADDR          0x10000000
 #define        USBH_PHYS_ADDR          0x10100000
 #define        USBD_PHYS_ADDR          0x10200000
@@ -718,10 +719,8 @@ enum soc_au1200_ints {
 #define        DMA5_PHYS_ADDR          0x14002500
 #define        DMA6_PHYS_ADDR          0x14002600
 #define        DMA7_PHYS_ADDR          0x14002700
-#define        IC0_PHYS_ADDR           0x10400000
 #define SD0_PHYS_ADDR          0x10600000
 #define SD1_PHYS_ADDR          0x10680000
-#define        IC1_PHYS_ADDR           0x11800000
 #define        AC97_PHYS_ADDR          0x10000000
 #define        USBH_PHYS_ADDR          0x10100000
 #define        USBD_PHYS_ADDR          0x10200000
@@ -749,8 +748,6 @@ enum soc_au1200_ints {
 #ifdef CONFIG_SOC_AU1550
 #define        MEM_PHYS_ADDR           0x14000000
 #define        STATIC_MEM_PHYS_ADDR    0x14001000
-#define        IC0_PHYS_ADDR           0x10400000
-#define        IC1_PHYS_ADDR           0x11800000
 #define        USBH_PHYS_ADDR          0x14020000
 #define        USBD_PHYS_ADDR          0x10200000
 #define PCI_PHYS_ADDR          0x14005000
@@ -786,8 +783,6 @@ enum soc_au1200_ints {
 #define        STATIC_MEM_PHYS_ADDR    0x14001000
 #define AES_PHYS_ADDR          0x10300000
 #define CIM_PHYS_ADDR          0x14004000
-#define        IC0_PHYS_ADDR           0x10400000
-#define        IC1_PHYS_ADDR           0x11800000
 #define USBM_PHYS_ADDR         0x14020000
 #define        USBH_PHYS_ADDR          0x14020100
 #define        UART0_PHYS_ADDR         0x11100000
@@ -835,112 +830,6 @@ enum soc_au1200_ints {
 #endif
 
 
-/* Interrupt Controller register offsets */
-#define IC_CFG0RD              0x40
-#define IC_CFG0SET             0x40
-#define IC_CFG0CLR             0x44
-#define IC_CFG1RD              0x48
-#define IC_CFG1SET             0x48
-#define IC_CFG1CLR             0x4C
-#define IC_CFG2RD              0x50
-#define IC_CFG2SET             0x50
-#define IC_CFG2CLR             0x54
-#define IC_REQ0INT             0x54
-#define IC_SRCRD               0x58
-#define IC_SRCSET              0x58
-#define IC_SRCCLR              0x5C
-#define IC_REQ1INT             0x5C
-#define IC_ASSIGNRD            0x60
-#define IC_ASSIGNSET           0x60
-#define IC_ASSIGNCLR           0x64
-#define IC_WAKERD              0x68
-#define IC_WAKESET             0x68
-#define IC_WAKECLR             0x6C
-#define IC_MASKRD              0x70
-#define IC_MASKSET             0x70
-#define IC_MASKCLR             0x74
-#define IC_RISINGRD            0x78
-#define IC_RISINGCLR           0x78
-#define IC_FALLINGRD           0x7C
-#define IC_FALLINGCLR          0x7C
-#define IC_TESTBIT             0x80
-
-
-/* Interrupt Controller 0 */
-#define IC0_CFG0RD             0xB0400040
-#define IC0_CFG0SET            0xB0400040
-#define IC0_CFG0CLR            0xB0400044
-
-#define IC0_CFG1RD             0xB0400048
-#define IC0_CFG1SET            0xB0400048
-#define IC0_CFG1CLR            0xB040004C
-
-#define IC0_CFG2RD             0xB0400050
-#define IC0_CFG2SET            0xB0400050
-#define IC0_CFG2CLR            0xB0400054
-
-#define IC0_REQ0INT            0xB0400054
-#define IC0_SRCRD              0xB0400058
-#define IC0_SRCSET             0xB0400058
-#define IC0_SRCCLR             0xB040005C
-#define IC0_REQ1INT            0xB040005C
-
-#define IC0_ASSIGNRD           0xB0400060
-#define IC0_ASSIGNSET          0xB0400060
-#define IC0_ASSIGNCLR          0xB0400064
-
-#define IC0_WAKERD             0xB0400068
-#define IC0_WAKESET            0xB0400068
-#define IC0_WAKECLR            0xB040006C
-
-#define IC0_MASKRD             0xB0400070
-#define IC0_MASKSET            0xB0400070
-#define IC0_MASKCLR            0xB0400074
-
-#define IC0_RISINGRD           0xB0400078
-#define IC0_RISINGCLR          0xB0400078
-#define IC0_FALLINGRD          0xB040007C
-#define IC0_FALLINGCLR         0xB040007C
-
-#define IC0_TESTBIT            0xB0400080
-
-/* Interrupt Controller 1 */
-#define IC1_CFG0RD             0xB1800040
-#define IC1_CFG0SET            0xB1800040
-#define IC1_CFG0CLR            0xB1800044
-
-#define IC1_CFG1RD             0xB1800048
-#define IC1_CFG1SET            0xB1800048
-#define IC1_CFG1CLR            0xB180004C
-
-#define IC1_CFG2RD             0xB1800050
-#define IC1_CFG2SET            0xB1800050
-#define IC1_CFG2CLR            0xB1800054
-
-#define IC1_REQ0INT            0xB1800054
-#define IC1_SRCRD              0xB1800058
-#define IC1_SRCSET             0xB1800058
-#define IC1_SRCCLR             0xB180005C
-#define IC1_REQ1INT            0xB180005C
-
-#define IC1_ASSIGNRD            0xB1800060
-#define IC1_ASSIGNSET           0xB1800060
-#define IC1_ASSIGNCLR           0xB1800064
-
-#define IC1_WAKERD             0xB1800068
-#define IC1_WAKESET            0xB1800068
-#define IC1_WAKECLR            0xB180006C
-
-#define IC1_MASKRD             0xB1800070
-#define IC1_MASKSET            0xB1800070
-#define IC1_MASKCLR            0xB1800074
-
-#define IC1_RISINGRD           0xB1800078
-#define IC1_RISINGCLR          0xB1800078
-#define IC1_FALLINGRD          0xB180007C
-#define IC1_FALLINGCLR         0xB180007C
-
-#define IC1_TESTBIT            0xB1800080
 
 
 /* Au1000 */