#include <asm/mach-pb1x00/pb1000.h>
#endif
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD 0x40
+#define IC_CFG0SET 0x40
+#define IC_CFG0CLR 0x44
+#define IC_CFG1RD 0x48
+#define IC_CFG1SET 0x48
+#define IC_CFG1CLR 0x4C
+#define IC_CFG2RD 0x50
+#define IC_CFG2SET 0x50
+#define IC_CFG2CLR 0x54
+#define IC_REQ0INT 0x54
+#define IC_SRCRD 0x58
+#define IC_SRCSET 0x58
+#define IC_SRCCLR 0x5C
+#define IC_REQ1INT 0x5C
+#define IC_ASSIGNRD 0x60
+#define IC_ASSIGNSET 0x60
+#define IC_ASSIGNCLR 0x64
+#define IC_WAKERD 0x68
+#define IC_WAKESET 0x68
+#define IC_WAKECLR 0x6C
+#define IC_MASKRD 0x70
+#define IC_MASKSET 0x70
+#define IC_MASKCLR 0x74
+#define IC_RISINGRD 0x78
+#define IC_RISINGCLR 0x78
+#define IC_FALLINGRD 0x7C
+#define IC_FALLINGCLR 0x7C
+#define IC_TESTBIT 0x80
+
static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type);
/* NOTE on interrupt priorities: The original writers of this code said:
static void au1x_ic0_unmask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
- au_writel(1 << bit, IC0_MASKSET);
- au_writel(1 << bit, IC0_WAKESET);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKSET);
+ __raw_writel(1 << bit, base + IC_WAKESET);
+ wmb();
}
static void au1x_ic1_unmask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
- au_writel(1 << bit, IC1_MASKSET);
- au_writel(1 << bit, IC1_WAKESET);
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKSET);
+ __raw_writel(1 << bit, base + IC_WAKESET);
/* very hacky. does the pb1000 cpld auto-disable this int?
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
if (d->irq == AU1000_GPIO15_INT)
- au_writel(0x4000, PB1000_MDR); /* enable int */
+ __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */
#endif
- au_sync();
+ wmb();
}
static void au1x_ic0_mask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_WAKECLR);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ wmb();
}
static void au1x_ic1_mask(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
- au_writel(1 << bit, IC1_MASKCLR);
- au_writel(1 << bit, IC1_WAKECLR);
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ wmb();
}
static void au1x_ic0_ack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ wmb();
}
static void au1x_ic1_ack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
/*
* This may assume that we don't get interrupts from
* both edges at once, or if we do, that we don't care.
*/
- au_writel(1 << bit, IC1_FALLINGCLR);
- au_writel(1 << bit, IC1_RISINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ wmb();
}
static void au1x_ic0_maskack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
- au_writel(1 << bit, IC0_WAKECLR);
- au_writel(1 << bit, IC0_MASKCLR);
- au_writel(1 << bit, IC0_RISINGCLR);
- au_writel(1 << bit, IC0_FALLINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ wmb();
}
static void au1x_ic1_maskack(struct irq_data *d)
{
unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
- au_writel(1 << bit, IC1_WAKECLR);
- au_writel(1 << bit, IC1_MASKCLR);
- au_writel(1 << bit, IC1_RISINGCLR);
- au_writel(1 << bit, IC1_FALLINGCLR);
- au_sync();
+ __raw_writel(1 << bit, base + IC_WAKECLR);
+ __raw_writel(1 << bit, base + IC_MASKCLR);
+ __raw_writel(1 << bit, base + IC_RISINGCLR);
+ __raw_writel(1 << bit, base + IC_FALLINGCLR);
+ wmb();
}
static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
return -EINVAL;
local_irq_save(flags);
- wakemsk = au_readl(SYS_WAKEMSK);
+ wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK);
if (on)
wakemsk |= 1 << bit;
else
wakemsk &= ~(1 << bit);
- au_writel(wakemsk, SYS_WAKEMSK);
- au_sync();
+ __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK);
+ wmb();
local_irq_restore(flags);
return 0;
static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
{
struct irq_chip *chip;
- unsigned long icr[6];
- unsigned int bit, ic, irq = d->irq;
+ unsigned int bit, irq = d->irq;
irq_flow_handler_t handler = NULL;
unsigned char *name = NULL;
+ void __iomem *base;
int ret;
if (irq >= AU1000_INTC1_INT_BASE) {
bit = irq - AU1000_INTC1_INT_BASE;
chip = &au1x_ic1_chip;
- ic = 1;
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
} else {
bit = irq - AU1000_INTC0_INT_BASE;
chip = &au1x_ic0_chip;
- ic = 0;
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
}
if (bit > 31)
return -EINVAL;
- icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
- icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
- icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
- icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
- icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
- icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
-
ret = 0;
switch (flow_type) { /* cfgregs 2:1:0 */
case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_edge_irq;
name = "riseedge";
break;
case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
handler = handle_edge_irq;
name = "falledge";
break;
case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_edge_irq;
name = "bothedge";
break;
case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */
- au_writel(1 << bit, icr[2]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[0]);
+ __raw_writel(1 << bit, base + IC_CFG2SET);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0SET);
handler = handle_level_irq;
name = "hilevel";
break;
case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */
- au_writel(1 << bit, icr[2]);
- au_writel(1 << bit, icr[1]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2SET);
+ __raw_writel(1 << bit, base + IC_CFG1SET);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
handler = handle_level_irq;
name = "lowlevel";
break;
case IRQ_TYPE_NONE: /* 0:0:0 */
- au_writel(1 << bit, icr[5]);
- au_writel(1 << bit, icr[4]);
- au_writel(1 << bit, icr[3]);
+ __raw_writel(1 << bit, base + IC_CFG2CLR);
+ __raw_writel(1 << bit, base + IC_CFG1CLR);
+ __raw_writel(1 << bit, base + IC_CFG0CLR);
break;
default:
ret = -EINVAL;
}
__irq_set_chip_handler_name_locked(d->irq, chip, handler, name);
- au_sync();
+ wmb();
return ret;
}
off = MIPS_CPU_IRQ_BASE + 7;
goto handle;
} else if (pending & CAUSEF_IP2) {
- s = IC0_REQ0INT;
+ s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP3) {
- s = IC0_REQ1INT;
+ s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT;
off = AU1000_INTC0_INT_BASE;
} else if (pending & CAUSEF_IP4) {
- s = IC1_REQ0INT;
+ s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT;
off = AU1000_INTC1_INT_BASE;
} else if (pending & CAUSEF_IP5) {
- s = IC1_REQ1INT;
+ s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT;
off = AU1000_INTC1_INT_BASE;
} else
goto spurious;
- s = au_readl(s);
+ s = __raw_readl((void __iomem *)s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
do_IRQ(off);
}
+
+static inline void ic_init(void __iomem *base)
+{
+ /* initialize interrupt controller to a safe state */
+ __raw_writel(0xffffffff, base + IC_CFG0CLR);
+ __raw_writel(0xffffffff, base + IC_CFG1CLR);
+ __raw_writel(0xffffffff, base + IC_CFG2CLR);
+ __raw_writel(0xffffffff, base + IC_MASKCLR);
+ __raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+ __raw_writel(0xffffffff, base + IC_WAKECLR);
+ __raw_writel(0xffffffff, base + IC_SRCSET);
+ __raw_writel(0xffffffff, base + IC_FALLINGCLR);
+ __raw_writel(0xffffffff, base + IC_RISINGCLR);
+ __raw_writel(0x00000000, base + IC_TESTBIT);
+ wmb();
+}
+
static void __init au1000_init_irq(struct au1xxx_irqmap *map)
{
unsigned int bit, irq_nr;
- int i;
-
- /*
- * Initialize interrupt controllers to a safe state.
- */
- au_writel(0xffffffff, IC0_CFG0CLR);
- au_writel(0xffffffff, IC0_CFG1CLR);
- au_writel(0xffffffff, IC0_CFG2CLR);
- au_writel(0xffffffff, IC0_MASKCLR);
- au_writel(0xffffffff, IC0_ASSIGNCLR);
- au_writel(0xffffffff, IC0_WAKECLR);
- au_writel(0xffffffff, IC0_SRCSET);
- au_writel(0xffffffff, IC0_FALLINGCLR);
- au_writel(0xffffffff, IC0_RISINGCLR);
- au_writel(0x00000000, IC0_TESTBIT);
-
- au_writel(0xffffffff, IC1_CFG0CLR);
- au_writel(0xffffffff, IC1_CFG1CLR);
- au_writel(0xffffffff, IC1_CFG2CLR);
- au_writel(0xffffffff, IC1_MASKCLR);
- au_writel(0xffffffff, IC1_ASSIGNCLR);
- au_writel(0xffffffff, IC1_WAKECLR);
- au_writel(0xffffffff, IC1_SRCSET);
- au_writel(0xffffffff, IC1_FALLINGCLR);
- au_writel(0xffffffff, IC1_RISINGCLR);
- au_writel(0x00000000, IC1_TESTBIT);
+ void __iomem *base;
+ ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+ ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
mips_cpu_irq_init();
/* register all 64 possible IC0+IC1 irq sources as type "none".
* Use set_irq_type() to set edge/level behaviour at runtime.
*/
- for (i = AU1000_INTC0_INT_BASE;
- (i < AU1000_INTC0_INT_BASE + 32); i++)
- au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+ for (irq_nr = AU1000_INTC0_INT_BASE;
+ (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+ au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
- for (i = AU1000_INTC1_INT_BASE;
- (i < AU1000_INTC1_INT_BASE + 32); i++)
- au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+ for (irq_nr = AU1000_INTC1_INT_BASE;
+ (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+ au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
/*
* Initialize IC0, which is fixed per processor.
if (irq_nr >= AU1000_INTC1_INT_BASE) {
bit = irq_nr - AU1000_INTC1_INT_BASE;
- if (map->im_request)
- au_writel(1 << bit, IC1_ASSIGNSET);
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
} else {
bit = irq_nr - AU1000_INTC0_INT_BASE;
- if (map->im_request)
- au_writel(1 << bit, IC0_ASSIGNSET);
+ base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
}
+ if (map->im_request)
+ __raw_writel(1 << bit, base + IC_ASSIGNSET);
au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type);
++map;
struct alchemy_ic_sysdev *icdev =
container_of(dev, struct alchemy_ic_sysdev, sysdev);
- __raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
- __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
- __raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
- __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
- __raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
- __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
- __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
- __raw_writel(0x00000000, icdev->base + IC_TESTBIT);
- wmb();
+ ic_init(icdev->base);
+
__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
static int __init alchemy_ic_sysdev_init(void)
{
struct alchemy_ic_sysdev *icdev;
- unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
+ unsigned long icbase[2] = { AU1000_IC0_PHYS_ADDR, AU1000_IC1_PHYS_ADDR };
int err, i;
err = sysdev_class_register(&alchemy_ic_sysdev_class);
/*
* Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
*/
+#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+
+
#ifdef CONFIG_SOC_AU1000
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define DMA5_PHYS_ADDR 0x14002500
#define DMA6_PHYS_ADDR 0x14002600
#define DMA7_PHYS_ADDR 0x14002700
-#define IC0_PHYS_ADDR 0x10400000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
-#define IC1_PHYS_ADDR 0x11800000
#define AC97_PHYS_ADDR 0x10000000
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#ifdef CONFIG_SOC_AU1550
#define MEM_PHYS_ADDR 0x14000000
#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
#define USBH_PHYS_ADDR 0x14020000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define AES_PHYS_ADDR 0x10300000
#define CIM_PHYS_ADDR 0x14004000
-#define IC0_PHYS_ADDR 0x10400000
-#define IC1_PHYS_ADDR 0x11800000
#define USBM_PHYS_ADDR 0x14020000
#define USBH_PHYS_ADDR 0x14020100
#define UART0_PHYS_ADDR 0x11100000
#endif
-/* Interrupt Controller register offsets */
-#define IC_CFG0RD 0x40
-#define IC_CFG0SET 0x40
-#define IC_CFG0CLR 0x44
-#define IC_CFG1RD 0x48
-#define IC_CFG1SET 0x48
-#define IC_CFG1CLR 0x4C
-#define IC_CFG2RD 0x50
-#define IC_CFG2SET 0x50
-#define IC_CFG2CLR 0x54
-#define IC_REQ0INT 0x54
-#define IC_SRCRD 0x58
-#define IC_SRCSET 0x58
-#define IC_SRCCLR 0x5C
-#define IC_REQ1INT 0x5C
-#define IC_ASSIGNRD 0x60
-#define IC_ASSIGNSET 0x60
-#define IC_ASSIGNCLR 0x64
-#define IC_WAKERD 0x68
-#define IC_WAKESET 0x68
-#define IC_WAKECLR 0x6C
-#define IC_MASKRD 0x70
-#define IC_MASKSET 0x70
-#define IC_MASKCLR 0x74
-#define IC_RISINGRD 0x78
-#define IC_RISINGCLR 0x78
-#define IC_FALLINGRD 0x7C
-#define IC_FALLINGCLR 0x7C
-#define IC_TESTBIT 0x80
-
-
-/* Interrupt Controller 0 */
-#define IC0_CFG0RD 0xB0400040
-#define IC0_CFG0SET 0xB0400040
-#define IC0_CFG0CLR 0xB0400044
-
-#define IC0_CFG1RD 0xB0400048
-#define IC0_CFG1SET 0xB0400048
-#define IC0_CFG1CLR 0xB040004C
-
-#define IC0_CFG2RD 0xB0400050
-#define IC0_CFG2SET 0xB0400050
-#define IC0_CFG2CLR 0xB0400054
-
-#define IC0_REQ0INT 0xB0400054
-#define IC0_SRCRD 0xB0400058
-#define IC0_SRCSET 0xB0400058
-#define IC0_SRCCLR 0xB040005C
-#define IC0_REQ1INT 0xB040005C
-
-#define IC0_ASSIGNRD 0xB0400060
-#define IC0_ASSIGNSET 0xB0400060
-#define IC0_ASSIGNCLR 0xB0400064
-
-#define IC0_WAKERD 0xB0400068
-#define IC0_WAKESET 0xB0400068
-#define IC0_WAKECLR 0xB040006C
-
-#define IC0_MASKRD 0xB0400070
-#define IC0_MASKSET 0xB0400070
-#define IC0_MASKCLR 0xB0400074
-
-#define IC0_RISINGRD 0xB0400078
-#define IC0_RISINGCLR 0xB0400078
-#define IC0_FALLINGRD 0xB040007C
-#define IC0_FALLINGCLR 0xB040007C
-
-#define IC0_TESTBIT 0xB0400080
-
-/* Interrupt Controller 1 */
-#define IC1_CFG0RD 0xB1800040
-#define IC1_CFG0SET 0xB1800040
-#define IC1_CFG0CLR 0xB1800044
-
-#define IC1_CFG1RD 0xB1800048
-#define IC1_CFG1SET 0xB1800048
-#define IC1_CFG1CLR 0xB180004C
-
-#define IC1_CFG2RD 0xB1800050
-#define IC1_CFG2SET 0xB1800050
-#define IC1_CFG2CLR 0xB1800054
-
-#define IC1_REQ0INT 0xB1800054
-#define IC1_SRCRD 0xB1800058
-#define IC1_SRCSET 0xB1800058
-#define IC1_SRCCLR 0xB180005C
-#define IC1_REQ1INT 0xB180005C
-
-#define IC1_ASSIGNRD 0xB1800060
-#define IC1_ASSIGNSET 0xB1800060
-#define IC1_ASSIGNCLR 0xB1800064
-
-#define IC1_WAKERD 0xB1800068
-#define IC1_WAKESET 0xB1800068
-#define IC1_WAKECLR 0xB180006C
-
-#define IC1_MASKRD 0xB1800070
-#define IC1_MASKSET 0xB1800070
-#define IC1_MASKCLR 0xB1800074
-
-#define IC1_RISINGRD 0xB1800078
-#define IC1_RISINGCLR 0xB1800078
-#define IC1_FALLINGRD 0xB180007C
-#define IC1_FALLINGCLR 0xB180007C
-
-#define IC1_TESTBIT 0xB1800080
/* Au1000 */
projects / platform / kernel / kernel-mfld-blackbay.git / commitdiff