mmc: sti_sdhci: Use reset framework

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/drivers/mmc/sti_sdhci.c b/drivers/mmc/sti_sdhci.c
index 714afd9..d8b5888 100644 (file)
--- a/drivers/mmc/sti_sdhci.c
+++ b/drivers/mmc/sti_sdhci.c
@@ -8,6 +8,7 @@
 #include <common.h>
 #include <dm.h>
 #include <mmc.h>
+#include <reset-uclass.h>
 #include <sdhci.h>
 #include <asm/arch/sdhci.h>
 
@@ -16,15 +17,10 @@ DECLARE_GLOBAL_DATA_PTR;
 struct sti_sdhci_plat {
        struct mmc_config cfg;
        struct mmc mmc;
+       struct reset_ctl reset;
        int instance;
 };
 
-/*
- * used to get access to MMC1 reset,
- * will be removed when STi reset driver will be available
- */
-#define STIH410_SYSCONF5_BASE          0x092b0000
-
 /**
  * sti_mmc_core_config: configure the Arasan HC
  * @dev : udevice
@@ -37,17 +33,19 @@ struct sti_sdhci_plat {
  * W/o these settings the SDHCI could configure and use the embedded controller
  * with limited features.
  */
-static void sti_mmc_core_config(struct udevice *dev)
+static int sti_mmc_core_config(struct udevice *dev)
 {
        struct sti_sdhci_plat *plat = dev_get_platdata(dev);
        struct sdhci_host *host = dev_get_priv(dev);
-       unsigned long *sysconf;
+       int ret;
 
        /* only MMC1 has a reset line */
        if (plat->instance) {
-               sysconf = (unsigned long *)(STIH410_SYSCONF5_BASE +
-                         ST_MMC_CCONFIG_REG_5);
-               generic_set_bit(SYSCONF_MMC1_ENABLE_BIT, sysconf);
+               ret = reset_deassert(&plat->reset);
+               if (ret < 0) {
+                       error("MMC1 deassert failed: %d", ret);
+                       return ret;
+               }
        }
 
        writel(STI_FLASHSS_MMC_CORE_CONFIG_1,
@@ -66,6 +64,8 @@ static void sti_mmc_core_config(struct udevice *dev)
        }
        writel(STI_FLASHSS_MMC_CORE_CONFIG4,
               host->ioaddr + FLASHSS_MMC_CORE_CONFIG_4);
+
+       return 0;
 }
 
 static int sti_sdhci_probe(struct udevice *dev)
@@ -80,13 +80,18 @@ static int sti_sdhci_probe(struct udevice *dev)
         * MMC0 is wired to the SD slot,
         * MMC1 is wired on the high speed connector
         */
-
-       if (fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "resets", NULL))
+       ret = reset_get_by_index(dev, 0, &plat->reset);
+       if (!ret)
                plat->instance = 1;
        else
-               plat->instance = 0;
+               if (ret == -ENOENT)
+                       plat->instance = 0;
+               else
+                       return ret;
 
-       sti_mmc_core_config(dev);
+       ret = sti_mmc_core_config(dev);
+       if (ret)
+               return ret;
 
        host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
                       SDHCI_QUIRK_32BIT_DMA_ADDR |