phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family

When the EHCI controller received a 512 byte USB packet that
had to be broken into 2 256 byte bursts across the SCB bus AND
there was a following 512 byte USB packet, the second burst of
data from the first packet was sometimes being lost. If the
burst size was changed to 128 bytes via the EBR_SCB_SIZE field
in the USB_CTRL_EBRIDGE register we'd see the 4th 128 byte burst
of the first packet being lost. This problem became much worse
if other threads were running that accessed memory, like a memcpy
test. Setting the EBR_SCB_SIZE to 512, which prevents breaking
the EHCI USB packet (max size of 512 bytes) into bursts, fixed
the problem.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 91b5b09..bd473d1 100644 (file)
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -42,6 +42,7 @@
 #define   USB_CTRL_PLL_CTL_PLL_IDDQ_PWRDN_MASK         0x80000000 /* option */
 #define USB_CTRL_EBRIDGE               0x0c
 #define   USB_CTRL_EBRIDGE_ESTOP_SCB_REQ_MASK          0x00020000 /* option */
+#define   USB_CTRL_EBRIDGE_EBR_SCB_SIZE_MASK           0x00000f80 /* option */
 #define USB_CTRL_OBRIDGE               0x10
 #define   USB_CTRL_OBRIDGE_LS_KEEP_ALIVE_MASK          0x08000000
 #define USB_CTRL_MDIO                  0x14
@@ -176,6 +177,7 @@ static const struct id_to_type id_to_type_table[] = {
        { 0x33900000, BRCM_FAMILY_3390A0 },
        { 0x72500010, BRCM_FAMILY_7250B0 },
        { 0x72600000, BRCM_FAMILY_7260A0 },
+       { 0x72550000, BRCM_FAMILY_7260A0 },
        { 0x72680000, BRCM_FAMILY_7271A0 },
        { 0x72710000, BRCM_FAMILY_7271A0 },
        { 0x73640000, BRCM_FAMILY_7364A0 },
@@ -948,6 +950,17 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
        if (params->selected_family == BRCM_FAMILY_7271A0)
                /* Enable LS keep alive fix for certain keyboards */
                USB_CTRL_SET(ctrl, OBRIDGE, LS_KEEP_ALIVE);
+
+       if (params->family_id == 0x72550000) {
+               /*
+                * Make the burst size 512 bytes to fix a hardware bug
+                * on the 7255a0. See HW7255-24.
+                */
+               reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
+               reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE);
+               reg |= 0x800;
+               brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
+       }
 }
 
 void brcm_usb_init_xhci(struct brcm_usb_init_params *params)