85xx: fix the wrong DDR settings for MPC8572DS

The default DDR freq is 400MHz or 800M data rate,
the old settings is pure wrong for the default case.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index f17639a..9a66ca8 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -115,22 +115,22 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define SPD_EEPROM_ADDRESS2    0x52    /* CTLR 1 DIMM 0 */
 
 /* These are used when DDR doesn't use SPD.  */
-#define CONFIG_SYS_SDRAM_SIZE          256             /* DDR is 256MB */
-#define CONFIG_SYS_DDR_CS0_BNDS        0x0000001F
-#define CONFIG_SYS_DDR_CS0_CONFIG      0x80010102      /* Enable, no interleaving */
-#define CONFIG_SYS_DDR_TIMING_3        0x00000000
-#define CONFIG_SYS_DDR_TIMING_0        0x00260802
-#define CONFIG_SYS_DDR_TIMING_1        0x3935d322
-#define CONFIG_SYS_DDR_TIMING_2        0x14904cc8
-#define CONFIG_SYS_DDR_MODE_1          0x00480432
+#define CONFIG_SYS_SDRAM_SIZE          512             /* DDR is 512MB */
+#define CONFIG_SYS_DDR_CS0_BNDS                0x0000001F
+#define CONFIG_SYS_DDR_CS0_CONFIG      0x80010202      /* Enable, no interleaving */
+#define CONFIG_SYS_DDR_TIMING_3                0x00020000
+#define CONFIG_SYS_DDR_TIMING_0                0x00260802
+#define CONFIG_SYS_DDR_TIMING_1                0x626b2634
+#define CONFIG_SYS_DDR_TIMING_2                0x062874cf
+#define CONFIG_SYS_DDR_MODE_1          0x00440462
 #define CONFIG_SYS_DDR_MODE_2          0x00000000
-#define CONFIG_SYS_DDR_INTERVAL        0x06180100
+#define CONFIG_SYS_DDR_INTERVAL                0x0c300100
 #define CONFIG_SYS_DDR_DATA_INIT       0xdeadbeef
-#define CONFIG_SYS_DDR_CLK_CTRL        0x03800000
-#define CONFIG_SYS_DDR_OCD_CTRL        0x00000000
+#define CONFIG_SYS_DDR_CLK_CTRL                0x00800000
+#define CONFIG_SYS_DDR_OCD_CTRL                0x00000000
 #define CONFIG_SYS_DDR_OCD_STATUS      0x00000000
-#define CONFIG_SYS_DDR_CONTROL         0xC3008000      /* Type = DDR2 */
-#define CONFIG_SYS_DDR_CONTROL2        0x04400010
+#define CONFIG_SYS_DDR_CONTROL         0xc3000008      /* Type = DDR2 */
+#define CONFIG_SYS_DDR_CONTROL2                0x24400000
 
 #define CONFIG_SYS_DDR_ERR_INT_EN      0x0000000d
 #define CONFIG_SYS_DDR_ERR_DIS         0x00000000