arm64: dts: ls208xa: Move cpu_thermal out of bus node

Move cpu_thermal node from soc node to root node.

cpu_thermal node does not have any register properties and thus
shouldn't be placed on the bus.

This fixes the following build warnings with W=1:

arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f3a40af..137ef4d 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -111,6 +111,55 @@
                mask = <0x2>;
        };
 
+       thermal-zones {
+               cpu_thermal: cpu-thermal {
+                       polling-delay-passive = <1000>;
+                       polling-delay = <5000>;
+
+                       thermal-sensors = <&tmu 4>;
+
+                       trips {
+                               cpu_alert: cpu-alert {
+                                       temperature = <75000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                               cpu_crit: cpu-crit {
+                                       temperature = <85000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               map0 {
+                                       trip = <&cpu_alert>;
+                                       cooling-device =
+                                               <&cpu0 THERMAL_NO_LIMIT
+                                               THERMAL_NO_LIMIT>;
+                               };
+                               map1 {
+                                       trip = <&cpu_alert>;
+                                       cooling-device =
+                                               <&cpu2 THERMAL_NO_LIMIT
+                                               THERMAL_NO_LIMIT>;
+                               };
+                               map2 {
+                                       trip = <&cpu_alert>;
+                                       cooling-device =
+                                               <&cpu4 THERMAL_NO_LIMIT
+                                               THERMAL_NO_LIMIT>;
+                               };
+                               map3 {
+                                       trip = <&cpu_alert>;
+                                       cooling-device =
+                                               <&cpu6 THERMAL_NO_LIMIT
+                                               THERMAL_NO_LIMIT>;
+                               };
+                       };
+               };
+       };
+
        timer {
                compatible = "arm,armv8-timer";
                interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
@@ -194,55 +243,6 @@
                        #thermal-sensor-cells = <1>;
                };
 
-               thermal-zones {
-                       cpu_thermal: cpu-thermal {
-                               polling-delay-passive = <1000>;
-                               polling-delay = <5000>;
-
-                               thermal-sensors = <&tmu 4>;
-
-                               trips {
-                                       cpu_alert: cpu-alert {
-                                               temperature = <75000>;
-                                               hysteresis = <2000>;
-                                               type = "passive";
-                                       };
-                                       cpu_crit: cpu-crit {
-                                               temperature = <85000>;
-                                               hysteresis = <2000>;
-                                               type = "critical";
-                                       };
-                               };
-
-                               cooling-maps {
-                                       map0 {
-                                               trip = <&cpu_alert>;
-                                               cooling-device =
-                                                       <&cpu0 THERMAL_NO_LIMIT
-                                                       THERMAL_NO_LIMIT>;
-                                       };
-                                       map1 {
-                                               trip = <&cpu_alert>;
-                                               cooling-device =
-                                                       <&cpu2 THERMAL_NO_LIMIT
-                                                       THERMAL_NO_LIMIT>;
-                                       };
-                                       map2 {
-                                               trip = <&cpu_alert>;
-                                               cooling-device =
-                                                       <&cpu4 THERMAL_NO_LIMIT
-                                                       THERMAL_NO_LIMIT>;
-                                       };
-                                       map3 {
-                                               trip = <&cpu_alert>;
-                                               cooling-device =
-                                                       <&cpu6 THERMAL_NO_LIMIT
-                                                       THERMAL_NO_LIMIT>;
-                                       };
-                               };
-                       };
-               };
-
                serial0: serial@21c0500 {
                        compatible = "fsl,ns16550", "ns16550a";
                        reg = <0x0 0x21c0500 0x0 0x100>;