armv8/ls1043a: Add MTD partition scheme

Add and share the the MTD partition scheme with kernel by default
bootargs. And add the "mtdparts" env.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index a651130..0ad5261 100644 (file)
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -241,6 +241,21 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
 
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \
+                       "5m(kernel),1m(dtb),9m(file_system)"
+#else
+#define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
+                       "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
+                       "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
+                       "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
+                       "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
+                       "40m(nor_bank4_fit);7e800000.flash:" \
+                       "1m(nand_uboot),1m(nand_uboot_env)," \
+                       "20m(nand_fit);spi0.0:1m(uboot)," \
+                       "5m(kernel),1m(dtb),9m(file_system)"
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
@@ -250,10 +265,13 @@
        "kernel_start=0x61100000\0"             \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
-       "console=ttyS0,115200\0"
+       "console=ttyS0,115200\0"                \
+       "mtdparts=" MTDPARTS_DEFAULT "\0"
 
 #define CONFIG_BOOTARGS                        "console=ttyS0,115200 root=/dev/ram0 " \
-                                       "earlycon=uart8250,mmio,0x21c0500"
+                                       "earlycon=uart8250,mmio,0x21c0500 "    \
+                                       MTDPARTS_DEFAULT
+
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND             "sf probe && sf read $kernel_load "    \
                                        "e0000 f00000 && bootm $kernel_load"