arm64: tegra194: p2888: Correct interrupt trigger type of temperature sensor

The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 7e7b0eb90c8029e932b79d23344d15ee6abf00d2..c4058ee36fecba580ab827cea98e9ff8942fb9b9 100644 (file)
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -309,7 +309,7 @@
 
                                interrupt-parent = <&gpio>;
                                interrupts = <TEGRA194_MAIN_GPIO(H, 2)
-                                             IRQ_TYPE_LEVEL_LOW>;
+                                             IRQ_TYPE_EDGE_FALLING>;
                                vcc-supply = <&vdd_1v8ls>;
 
                                #thermal-sensor-cells = <1>;