Delete lib/IPC/SysV.t (duplicate of ext/IPC/SysV/t/ipcsysv.t)

p4raw-id: //depot/perl@22347

diff --git a/MANIFEST b/MANIFEST
index 76f81e3..2d038bd 100644 (file)
--- a/MANIFEST
+++ b/MANIFEST
@@ -1304,7 +1304,6 @@ lib/IPC/Open2.pm          Open a two-ended pipe
 lib/IPC/Open2.t                        See if IPC::Open2 works
 lib/IPC/Open3.pm               Open a three-ended pipe!
 lib/IPC/Open3.t                        See if IPC::Open3 works
-lib/IPC/SysV.t                 See if IPC::SysV works
 lib/less.pm                    For "use less"
 lib/less.t                     See if less support works
 lib/lib_pm.PL                  For "use lib", produces lib/lib.pm

diff --git a/lib/IPC/SysV.t b/lib/IPC/SysV.t
deleted file mode 100755 (executable)
index 795ad5d..0000000
--- a/lib/IPC/SysV.t
+++ /dev/null
@@ -1,218 +0,0 @@
-#!./perl
-
-BEGIN {
-    chdir 't' if -d 't';
-
-    @INC = '../lib';
-
-    require Config; import Config;
-
-    my $reason;
-
-    if ($Config{'extensions'} !~ /\bIPC\/SysV\b/) {
-      $reason = 'IPC::SysV was not built';
-    } elsif ($Config{'d_sem'} ne 'define') {
-      $reason = '$Config{d_sem} undefined';
-    } elsif ($Config{'d_msg'} ne 'define') {
-      $reason = '$Config{d_msg} undefined';
-    }
-    if ($reason) {
-       print "1..0 # Skip: $reason\n";
-       exit 0;
-    }
-}
-
-# These constants are common to all tests.
-# Later the sem* tests will import more for themselves.
-
-use IPC::SysV qw(IPC_PRIVATE IPC_NOWAIT IPC_STAT IPC_RMID S_IRWXU);
-use strict;
-
-print "1..16\n";
-
-my $msg;
-my $sem;
-
-$SIG{__DIE__} = 'cleanup'; # will cleanup $msg and $sem if needed
-
-# FreeBSD is known to throw this if there's no SysV IPC in the kernel.
-$SIG{SYS} = sub {
-    print STDERR <<EOM;
-SIGSYS caught.
-It may be that your kernel does not have SysV IPC configured.
-
-EOM
-    if ($^O eq 'freebsd') {
-       print STDERR <<EOM;
-You must have following options in your kernel:
-
-options         SYSVSHM
-options         SYSVSEM
-options         SYSVMSG
-
-See config(8).
-EOM
-    }
-    exit(1);
-};
-
-my $perm = S_IRWXU;
-
-if ($Config{'d_msgget'} eq 'define' &&
-    $Config{'d_msgctl'} eq 'define' &&
-    $Config{'d_msgsnd'} eq 'define' &&
-    $Config{'d_msgrcv'} eq 'define') {
-
-    $msg = msgget(IPC_PRIVATE, $perm);
-    # Very first time called after machine is booted value may be 0 
-    die "msgget failed: $!\n" unless defined($msg) && $msg >= 0;
-
-    print "ok 1\n";
-
-    #Putting a message on the queue
-    my $msgtype = 1;
-    my $msgtext = "hello";
-
-    my $test2bad;
-    my $test5bad;
-    my $test6bad;
-
-    unless (msgsnd($msg,pack("L! a*",$msgtype,$msgtext),IPC_NOWAIT)) {
-       print "not ";
-       $test2bad = 1;
-    }
-    print "ok 2\n";
-    if ($test2bad) {
-       print <<EOM;
-#
-# The failure of the subtest #2 may indicate that the message queue
-# resource limits either of the system or of the testing account
-# have been reached.  Error message "Operating would block" is
-# usually indicative of this situation.  The error message was now:
-# "$!"
-#
-# You can check the message queues with the 'ipcs' command and
-# you can remove unneeded queues with the 'ipcrm -q id' command.
-# You may also consider configuring your system or account
-# to have more message queue resources.
-#
-# Because of the subtest #2 failing also the substests #5 and #6 will
-# very probably also fail.
-#
-EOM
-    }
-
-    my $data;
-    msgctl($msg,IPC_STAT,$data) or print "not ";
-    print "ok 3\n";
-
-    print "not " unless length($data);
-    print "ok 4\n";
-
-    my $msgbuf;
-    unless (msgrcv($msg,$msgbuf,256,0,IPC_NOWAIT)) {
-       print "not ";
-       $test5bad = 1;
-    }
-    print "ok 5\n";
-    if ($test5bad && $test2bad) {
-       print <<EOM;
-#
-# This failure was to be expected because the subtest #2 failed.
-#
-EOM
-    }
-
-    my($rmsgtype,$rmsgtext);
-    ($rmsgtype,$rmsgtext) = unpack("L! a*",$msgbuf);
-    unless ($rmsgtype == $msgtype && $rmsgtext eq $msgtext) {
-       print "not ";
-       $test6bad = 1;
-    }
-    print "ok 6\n";
-    if ($test6bad && $test2bad) {
-       print <<EOM;
-#
-# This failure was to be expected because the subtest #2 failed.
-#
-EOM
-     }
-} else {
-    for (1..6) {
-       print "ok $_\n"; # fake it
-    }
-}
-
-if($Config{'d_semget'} eq 'define' &&
-   $Config{'d_semctl'} eq 'define') {
-
-    if ($Config{'d_semctl_semid_ds'} eq 'define' ||
-       $Config{'d_semctl_semun'}    eq 'define') {
-
-       use IPC::SysV qw(IPC_CREAT GETALL SETALL);
-
-       $sem = semget(IPC_PRIVATE, 10, $perm | IPC_CREAT);
-       # Very first time called after machine is booted value may be 0 
-       die "semget: $!\n" unless defined($sem) && $sem >= 0;
-
-       print "ok 7\n";
-
-       my $data;
-       semctl($sem,0,IPC_STAT,$data) or print "not ";
-       print "ok 8\n";
-       
-       print "not " unless length($data);
-       print "ok 9\n";
-
-       my $nsem = 10;
-
-       semctl($sem,0,SETALL,pack("s!*",(0) x $nsem)) or print "not ";
-       print "ok 10\n";
-
-       $data = "";
-       semctl($sem,0,GETALL,$data) or print "not ";
-       print "ok 11\n";
-
-       print "not " unless length($data) == length(pack("s!*",(0) x $nsem));
-       print "ok 12\n";
-
-       my @data = unpack("s!*",$data);
-
-       my $adata = "0" x $nsem;
-
-       print "not " unless @data == $nsem and join("",@data) eq $adata;
-       print "ok 13\n";
-
-       my $poke = 2;
-
-       $data[$poke] = 1;
-       semctl($sem,0,SETALL,pack("s!*",@data)) or print "not ";
-       print "ok 14\n";
-    
-       $data = "";
-       semctl($sem,0,GETALL,$data) or print "not ";
-       print "ok 15\n";
-
-       @data = unpack("s!*",$data);
-
-       my $bdata = "0" x $poke . "1" . "0" x ($nsem-$poke-1);
-
-       print "not " unless join("",@data) eq $bdata;
-       print "ok 16\n";
-    } else {
-       for (7..16) {
-           print "ok $_ # skipped, no semctl possible\n";
-       }
-    }
-} else {
-    for (7..16) {
-       print "ok $_\n"; # fake it
-    }
-}
-
-sub cleanup {
-    msgctl($msg,IPC_RMID,0)       if defined $msg;
-    semctl($sem,0,IPC_RMID,undef) if defined $sem;
-}
-
-cleanup;