#include <linux/workqueue.h>
#include <linux/slab.h>
#include <linux/platform_data/leds-lp55xx.h>
+#include <linux/firmware.h>
#include "leds-lp55xx-common.h"
#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
#define SHIFT_MASK(id) (((id) - 1) * 2)
+/* Memory Page Selection */
+#define LP5523_PAGE_ENG1 0
+#define LP5523_PAGE_ENG2 1
+#define LP5523_PAGE_ENG3 2
+
+/* Program Memory Operations */
+#define LP5523_MODE_ENG1_M 0x30 /* Operation Mode Register */
+#define LP5523_MODE_ENG2_M 0x0C
+#define LP5523_MODE_ENG3_M 0x03
+#define LP5523_LOAD_ENG1 0x10
+#define LP5523_LOAD_ENG2 0x04
+#define LP5523_LOAD_ENG3 0x01
+
+#define LP5523_ENG1_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
+#define LP5523_ENG2_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
+#define LP5523_ENG3_IS_LOADING(mode) \
+ ((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
+
+#define LP5523_EXEC_ENG1_M 0x30 /* Enable Register */
+#define LP5523_EXEC_ENG2_M 0x0C
+#define LP5523_EXEC_ENG3_M 0x03
+#define LP5523_EXEC_M 0x3F
+#define LP5523_RUN_ENG1 0x20
+#define LP5523_RUN_ENG2 0x08
+#define LP5523_RUN_ENG3 0x02
+
enum lp5523_chip_id {
LP5523,
LP55231,
};
-struct lp5523_engine {
- int id;
- u8 mode;
- u8 prog_page;
- u8 mux_page;
- u16 led_mux;
- u8 engine_mask;
-};
-
struct lp5523_led {
int id;
u8 chan_nr;
struct lp5523_chip {
struct mutex lock; /* Serialize control */
struct i2c_client *client;
- struct lp5523_engine engines[LP5523_ENGINES];
struct lp5523_led leds[LP5523_MAX_LEDS];
struct lp5523_platform_data *pdata;
u8 num_channels;
u8 num_leds;
};
+static inline void lp5523_wait_opmode_done(void)
+{
+ usleep_range(1000, 2000);
+}
+
static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
{
led->led_current = led_current;
led_current);
}
-static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
-{
- return container_of(cdev, struct lp5523_led, cdev);
-}
-
-static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
-{
- return container_of(engine, struct lp5523_chip,
- engines[engine->id - 1]);
-}
-
-static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
-{
- return container_of(led, struct lp5523_chip,
- leds[led->id]);
-}
-
-static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
-static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
-static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern);
-
static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
{
return i2c_smbus_write_byte_data(client, reg, value);
return lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
}
-static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+static void lp5523_load_engine(struct lp55xx_chip *chip)
{
- struct lp5523_chip *chip = engine_to_lp5523(engine);
- struct i2c_client *client = chip->client;
- int ret;
- u8 engine_state;
-
- ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
- if (ret)
- goto fail;
-
- engine_state &= ~(engine->engine_mask);
-
- /* set mode only for this engine */
- mode &= engine->engine_mask;
-
- engine_state |= mode;
-
- ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
-fail:
- return ret;
+ enum lp55xx_engine_index idx = chip->engine_idx;
+ u8 mask[] = {
+ [LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
+ [LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
+ [LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
+ };
+
+ u8 val[] = {
+ [LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
+ [LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
+ [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
+ };
+
+ u8 page_sel[] = {
+ [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
+ [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
+ [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
+ };
+
+ lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
+
+ lp5523_wait_opmode_done();
+
+ lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
}
-static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+static void lp5523_stop_engine(struct lp55xx_chip *chip)
{
- struct lp5523_chip *chip = engine_to_lp5523(engine);
- struct i2c_client *client = chip->client;
- int ret = 0;
-
- ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+ lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
+ lp5523_wait_opmode_done();
+}
- ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
- ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
- (u8)(mux >> 8));
- ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
- engine->led_mux = mux;
+static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
+{
+ int i;
- return ret;
+ for (i = 0; i < LP5523_MAX_LEDS; i++)
+ lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
}
-static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern)
+static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
{
- struct lp5523_chip *chip = engine_to_lp5523(engine);
- struct i2c_client *client = chip->client;
+ int ret;
+ u8 mode;
+ u8 exec;
- int ret = 0;
+ /* stop engine */
+ if (!start) {
+ lp5523_stop_engine(chip);
+ lp5523_turn_off_channels(chip);
+ return;
+ }
- ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+ /*
+ * To run the engine,
+ * operation mode and enable register should updated at the same time
+ */
- ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
- engine->prog_page);
- ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
- LP5523_PROGRAM_LENGTH, pattern);
+ ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
+ if (ret)
+ return;
- return ret;
-}
+ ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
+ if (ret)
+ return;
-static int lp5523_run_program(struct lp5523_engine *engine)
-{
- struct lp5523_chip *chip = engine_to_lp5523(engine);
- struct i2c_client *client = chip->client;
- int ret;
+ /* change operation mode to RUN only when each engine is loading */
+ if (LP5523_ENG1_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
+ exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
+ }
- ret = lp5523_write(client, LP5523_REG_ENABLE,
- LP5523_CMD_RUN | LP5523_ENABLE);
- if (ret)
- goto fail;
+ if (LP5523_ENG2_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
+ exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
+ }
- ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
-fail:
- return ret;
+ if (LP5523_ENG3_IS_LOADING(mode)) {
+ mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
+ exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
+ }
+
+ lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
+ lp5523_wait_opmode_done();
+
+ lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
}
-static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+static int lp5523_update_program_memory(struct lp55xx_chip *chip,
+ const u8 *data, size_t size)
{
+ u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+ unsigned cmd;
+ char c[3];
+ int update_size;
+ int nrchars;
+ int offset = 0;
+ int ret;
int i;
- u16 tmp_mux = 0;
-
- len = min_t(int, len, LP5523_MAX_LEDS);
- for (i = 0; i < len; i++) {
- switch (buf[i]) {
- case '1':
- tmp_mux |= (1 << i);
- break;
- case '0':
- break;
- case '\n':
- i = len;
- break;
- default:
- return -1;
- }
- }
- *mux = tmp_mux;
- return 0;
-}
+ /* clear program memory before updating */
+ for (i = 0; i < LP5523_PROGRAM_LENGTH; i++)
+ lp55xx_write(chip, LP5523_REG_PROG_MEM + i, 0);
-static void lp5523_mux_to_array(u16 led_mux, char *array)
-{
- int i, pos = 0;
- for (i = 0; i < LP5523_MAX_LEDS; i++)
- pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+ i = 0;
+ while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+ /* separate sscanfs because length is working only for %s */
+ ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+ if (ret != 1)
+ goto err;
- array[pos] = '\0';
-}
+ ret = sscanf(c, "%2x", &cmd);
+ if (ret != 1)
+ goto err;
-/*--------------------------------------------------------------*/
-/* Sysfs interface */
-/*--------------------------------------------------------------*/
+ pattern[i] = (u8)cmd;
+ offset += nrchars;
+ i++;
+ }
-static ssize_t show_engine_leds(struct device *dev,
- struct device_attribute *attr,
- char *buf, int nr)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lp5523_chip *chip = i2c_get_clientdata(client);
- char mux[LP5523_MAX_LEDS + 1];
+ /* Each instruction is 16bit long. Check that length is even */
+ if (i % 2)
+ goto err;
- lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+ update_size = i;
+ for (i = 0; i < update_size; i++)
+ lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
- return sprintf(buf, "%s\n", mux);
-}
+ return 0;
-#define show_leds(nr) \
-static ssize_t show_engine##nr##_leds(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_engine_leds(dev, attr, buf, nr); \
+err:
+ dev_err(&chip->cl->dev, "wrong pattern format\n");
+ return -EINVAL;
}
-show_leds(1)
-show_leds(2)
-show_leds(3)
-static ssize_t store_engine_leds(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len, int nr)
+static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct lp5523_chip *chip = i2c_get_clientdata(client);
- u16 mux = 0;
- ssize_t ret;
-
- if (lp5523_mux_parse(buf, &mux, len))
- return -EINVAL;
+ const struct firmware *fw = chip->fw;
- mutex_lock(&chip->lock);
- ret = -EINVAL;
- if (chip->engines[nr - 1].mode != LP5523_CMD_LOAD)
- goto leave;
-
- if (lp5523_load_mux(&chip->engines[nr - 1], mux))
- goto leave;
+ if (fw->size > LP5523_PROGRAM_LENGTH) {
+ dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+ fw->size);
+ return;
+ }
- ret = len;
-leave:
- mutex_unlock(&chip->lock);
- return ret;
-}
+ /*
+ * Program momery sequence
+ * 1) set engine mode to "LOAD"
+ * 2) write firmware data into program memory
+ */
-#define store_leds(nr) \
-static ssize_t store_engine##nr##_leds(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t len) \
-{ \
- return store_engine_leds(dev, attr, buf, len, nr); \
+ lp5523_load_engine(chip);
+ lp5523_update_program_memory(chip, fw->data, fw->size);
}
-store_leds(1)
-store_leds(2)
-store_leds(3)
static ssize_t lp5523_selftest(struct device *dev,
struct device_attribute *attr,
mutex_unlock(&chip->lock);
}
-static int lp5523_do_store_load(struct lp5523_engine *engine,
- const char *buf, size_t len)
-{
- struct lp5523_chip *chip = engine_to_lp5523(engine);
- struct i2c_client *client = chip->client;
- int ret, nrchars, offset = 0, i = 0;
- char c[3];
- unsigned cmd;
- u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
-
- if (engine->mode != LP5523_CMD_LOAD)
- return -EINVAL;
-
- while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
- /* separate sscanfs because length is working only for %s */
- ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
- ret = sscanf(c, "%2x", &cmd);
- if (ret != 1)
- goto fail;
- pattern[i] = (u8)cmd;
-
- offset += nrchars;
- i++;
- }
-
- /* Each instruction is 16bit long. Check that length is even */
- if (i % 2)
- goto fail;
-
- mutex_lock(&chip->lock);
- ret = lp5523_load_program(engine, pattern);
- mutex_unlock(&chip->lock);
-
- if (ret) {
- dev_err(&client->dev, "failed loading pattern\n");
- return ret;
- }
-
- return len;
-fail:
- dev_err(&client->dev, "wrong pattern format\n");
- return -EINVAL;
-}
-
-static ssize_t store_engine_load(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len, int nr)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lp5523_chip *chip = i2c_get_clientdata(client);
- return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
-}
-
-#define store_load(nr) \
-static ssize_t store_engine##nr##_load(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t len) \
-{ \
- return store_engine_load(dev, attr, buf, len, nr); \
-}
-store_load(1)
-store_load(2)
-store_load(3)
-
-static ssize_t show_engine_mode(struct device *dev,
- struct device_attribute *attr,
- char *buf, int nr)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lp5523_chip *chip = i2c_get_clientdata(client);
- switch (chip->engines[nr - 1].mode) {
- case LP5523_CMD_RUN:
- return sprintf(buf, "run\n");
- case LP5523_CMD_LOAD:
- return sprintf(buf, "load\n");
- case LP5523_CMD_DISABLED:
- return sprintf(buf, "disabled\n");
- default:
- return sprintf(buf, "disabled\n");
- }
-}
-
-#define show_mode(nr) \
-static ssize_t show_engine##nr##_mode(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_engine_mode(dev, attr, buf, nr); \
-}
-show_mode(1)
-show_mode(2)
-show_mode(3)
-
-static ssize_t store_engine_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len, int nr)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct lp5523_chip *chip = i2c_get_clientdata(client);
- struct lp5523_engine *engine = &chip->engines[nr - 1];
- mutex_lock(&chip->lock);
-
- if (!strncmp(buf, "run", 3))
- lp5523_set_mode(engine, LP5523_CMD_RUN);
- else if (!strncmp(buf, "load", 4))
- lp5523_set_mode(engine, LP5523_CMD_LOAD);
- else if (!strncmp(buf, "disabled", 8))
- lp5523_set_mode(engine, LP5523_CMD_DISABLED);
-
- mutex_unlock(&chip->lock);
- return len;
-}
-
-#define store_mode(nr) \
-static ssize_t store_engine##nr##_mode(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t len) \
-{ \
- return store_engine_mode(dev, attr, buf, len, nr); \
-}
-store_mode(1)
-store_mode(2)
-store_mode(3)
-
-/* device attributes */
-static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR,
- show_engine1_mode, store_engine1_mode);
-static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR,
- show_engine2_mode, store_engine2_mode);
-static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR,
- show_engine3_mode, store_engine3_mode);
-static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUSR,
- show_engine1_leds, store_engine1_leds);
-static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUSR,
- show_engine2_leds, store_engine2_leds);
-static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUSR,
- show_engine3_leds, store_engine3_leds);
-static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
-static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
-static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
static struct attribute *lp5523_attributes[] = {
- &dev_attr_engine1_mode.attr,
- &dev_attr_engine2_mode.attr,
- &dev_attr_engine3_mode.attr,
&dev_attr_selftest.attr,
- &dev_attr_engine1_load.attr,
- &dev_attr_engine1_leds.attr,
- &dev_attr_engine2_load.attr,
- &dev_attr_engine2_leds.attr,
- &dev_attr_engine3_load.attr,
- &dev_attr_engine3_leds.attr,
NULL,
};
sysfs_remove_group(&dev->kobj, &lp5523_group);
}
-/*--------------------------------------------------------------*/
-/* Set chip operating mode */
-/*--------------------------------------------------------------*/
-static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
-{
- /* if in that mode already do nothing, except for run */
- if (mode == engine->mode && mode != LP5523_CMD_RUN)
- return;
-
- switch (mode) {
- case LP5523_CMD_RUN:
- lp5523_run_program(engine);
- break;
- case LP5523_CMD_LOAD:
- lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
- lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
- break;
- case LP5523_CMD_DISABLED:
- lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
- break;
- default:
- return;
- }
-
- engine->mode = mode;
-}
-
-/*--------------------------------------------------------------*/
-/* Probe, Attach, Remove */
-/*--------------------------------------------------------------*/
/* Chip specific configurations */
static struct lp55xx_device_config lp5523_cfg = {
.reset = {
.post_init_device = lp5523_post_init_device,
.brightness_work_fn = lp5523_led_brightness_work,
.set_led_current = lp5523_set_led_current,
+ .firmware_cb = lp5523_firmware_loaded,
+ .run_engine = lp5523_run_engine,
};
static int lp5523_probe(struct i2c_client *client,
projects / profile / ivi / kernel-x86-ivi.git / commitdiff