ARM: mach-shmobile: Marzen LAN89218 support

Add LAN89218 support to the r8a7779 Marzen board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 7fcd5e1..a72c650 100644 (file)
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/smsc911x.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -37,7 +38,38 @@
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
+/* SMSC LAN89218 */
+static struct resource smsc911x_resources[] = {
+       [0] = {
+               .start          = 0x18000000, /* ExCS0 */
+               .end            = 0x180000ff, /* A1->A7 */
+               .flags          = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start          = gic_spi(28), /* IRQ 1 */
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static struct smsc911x_platform_config smsc911x_platdata = {
+       .flags          = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
+       .phy_interface  = PHY_INTERFACE_MODE_MII,
+       .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+       .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+       .name           = "smsc911x",
+       .id             = 0,
+       .dev  = {
+               .platform_data = &smsc911x_platdata,
+       },
+       .resource       = smsc911x_resources,
+       .num_resources  = ARRAY_SIZE(smsc911x_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
+       &eth_device,
 };
 
 static struct map_desc marzen_io_desc[] __initdata = {
@@ -95,6 +127,10 @@ static void __init marzen_init(void)
        gpio_request(GPIO_FN_TX4, NULL);
        gpio_request(GPIO_FN_RX4, NULL);
 
+       /* LAN89218 */
+       gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
+       gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
+
        r8a7779_add_standard_devices();
        platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }