ad Avionic Design GmbH
adi Analog Devices, Inc.
+ak Asahi Kasei Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
+img Imagination Technologies Ltd.
intercontrol Inter Control Group
linux Linux-specific binding
marvell Marvell Technology Group Ltd.
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
+onnn ON Semiconductor Corp.
picochip Picochip Ltd
-powervr Imagination Technologies
+powervr PowerVR (deprecated, use img)
qcom Qualcomm, Inc.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
sil Silicon Image
simtek
sirf SiRF Technology, Inc.
+snps Synopsys, Inc.
st STMicroelectronics
stericsson ST-Ericsson
ti Texas Instruments
via VIA Technologies, Inc.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
+ winbond Winbond Electronics corp.
xlnx Xilinx
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_IPC_PARSE_VERSION
+ select BUILDTIME_EXTABLE_SORT if MMU
select CPU_PM if (SUSPEND || CPU_IDLE)
- select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
+ select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_IRQ_PROBE
select HAVE_AOUT
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
select HAVE_C_RECORDMCOUNT
select SYS_SUPPORTS_APM_EMULATION
select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
select MODULES_USE_ELF_REL
+ select CLONE_BACKWARDS
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
select MULTI_IRQ_HANDLER
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
- select PLAT_VERSATILE_FPGA_IRQ
select SPARSE_IRQ
+ select VERSATILE_FPGA_IRQ
help
Support for ARM's Integrator platform.
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_CLOCK
- select PLAT_VERSATILE_FPGA_IRQ
+ select VERSATILE_FPGA_IRQ
help
This enables support for ARM Ltd Versatile board.
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H if PCCARD
+ select PINCTRL
+ select PINCTRL_AT91 if USE_OF
help
This enables support for systems based on Atmel
AT91RM9200 and AT91SAM9* processors.
config ARCH_BCM2835
bool "Broadcom BCM2835 family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
select MULTI_IRQ_HANDLER
+ select PINCTRL
+ select PINCTRL_BCM2835
select SPARSE_IRQ
select USE_OF
help
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+ select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_ARM720T
+ select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for Cirrus Logic 711x/721x/731x based boards.
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
+ select PINCTRL
+ select PINCTRL_DOVE
select PLAT_ORION_LEGACY
select USB_ARCH_HAS_EHCI
help
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select PCI
+ select PCI_QUIRKS
+ select PINCTRL
+ select PINCTRL_KIRKWOOD
select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
select GPIO_PXA
select IRQ_DOMAIN
select NEED_MACH_GPIO_H
+ select PINCTRL
select PLAT_PXA
select SPARSE_IRQ
help
config PLAT_SPEAR
bool "ST SPEAr"
+ select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKDEV_LOOKUP
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
+ select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
source "arch/arm/mach-at91/Kconfig"
+source "arch/arm/mach-bcm/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
+source "arch/arm/mach-sunxi/Kconfig"
+
source "arch/arm/mach-prima2/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+ default y if PXA27x || PXA3xx || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
their output to UART1 serial port on DaVinci TNETV107X
devices.
+ config DEBUG_ZYNQ_UART0
+ bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 on the Zynq platform.
+
+ config DEBUG_ZYNQ_UART1
+ bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 on the Zynq platform.
+
+ If you have a ZC702 board and want early boot messages to
+ appear on the USB serial adaptor, select this option.
+
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
- config DEBUG_IMX6Q_UART2
- bool "i.MX6Q Debug UART2"
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q UART2. This is correct for e.g. the SabreLite
- board.
-
- config DEBUG_IMX6Q_UART4
- bool "i.MX6Q Debug UART4"
- depends on SOC_IMX6Q
- help
- Say Y here if you want kernel low-level debugging support
- on i.MX6Q UART4.
+ on i.MX6Q.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+ config DEBUG_S3C_UART3
+ depends on PLAT_SAMSUNG && ARCH_EXYNOS
+ bool "Use S3C UART 3 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 3. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
+ config DEBUG_SUNXI_UART0
+ bool "Kernel low-level debugging messages via sunXi UART0"
+ depends on ARCH_SUNXI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A1X based platforms on the UART0.
+
+ config DEBUG_SUNXI_UART1
+ bool "Kernel low-level debugging messages via sunXi UART1"
+ depends on ARCH_SUNXI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A1X based platforms on the UART1.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
endchoice
+ config DEBUG_IMX6Q_UART_PORT
+ int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
+ range 1 5
+ default 1
+ depends on SOC_IMX6Q
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
DEBUG_IMX31_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX50_IMX53_UART ||\
- DEBUG_IMX6Q_UART2 || \
- DEBUG_IMX6Q_UART4
+ DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+ default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
default "mach/debug-macro.S"
ifeq ($(CONFIG_OF),y)
-dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
- at91sam9263ek.dtb \
- at91sam9g20ek_2mmc.dtb \
- at91sam9g20ek.dtb \
- at91sam9g25ek.dtb \
- at91sam9m10g45ek.dtb \
- at91sam9n12ek.dtb \
- ethernut5.dtb \
- evk-pro3.dtb \
- kizbox.dtb \
- tny_a9260.dtb \
- tny_a9263.dtb \
- tny_a9g20.dtb \
- usb_a9260.dtb \
- usb_a9263.dtb \
- usb_a9g20.dtb
+# Keep at91 dtb files sorted alphabetically for each SoC
+# rm9200
+dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
+# sam9260
+dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
+dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
+dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
+dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
+# sam9g20
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
+dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
+dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
+# sam9n12
+dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9x5
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
+ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+ da850-evm.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
- exynos5440-ssdk5440.dtb
+ exynos5250-smdk5250.dtb \
-dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
++ exynos5440-ssdk5440.dtb \
+ exynos4412-smdk4412.dtb \
+ exynos5250-smdk5250.dtb \
+ exynos5250-snow.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
+ ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
imx53-qsb.dtb \
imx53-smd.dtb \
imx6q-arm2.dtb \
+ imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
+ imx28-apf28.dtb \
+ imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
+ imx28-sps1.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
am335x-bone.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
- dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
+ hrefprev60.dtb \
+ hrefv60plus.dtb \
+ ccu9540.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
- sh73a0-kzm9g.dtb
+ sh73a0-kzm9g.dtb \
+ sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear310-evb.dtb \
spear320-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \
+ sun5i-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb
+ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
+targets += dtbs
endif
+
+# *.dtb used to be generated in the directory above. Clean out the
+# old build results so people don't accidentally use them.
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ $(Q)rm -f $(obj)/../*.dtb
+
+clean-files := *.dtb
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
- serial5 = &usart4;
- serial6 = &usart5;
+ serial5 = &uart0;
+ serial6 = &uart1;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
interrupts = <26 4 0 27 4 0 28 4 0>;
};
- pioA: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x600>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+ 0xffffffff 0x007fffff /* pioC */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A */
+ 1 15 0x1 0x1>; /* PB15 periph with pullup */
+ };
+ };
- pioB: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <1 4 0x1 0x0 /* PB4 periph A */
+ 1 5 0x1 0x0>; /* PB5 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <1 26 0x1 0x0>; /* PB26 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <1 27 0x1 0x0>; /* PB27 periph A */
+ };
+
+ pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+ atmel,pins =
+ <1 24 0x1 0x0 /* PB24 periph A */
+ 1 22 0x1 0x0>; /* PB22 periph A */
+ };
+
+ pinctrl_usart0_dcd: usart0_dcd-0 {
+ atmel,pins =
+ <1 23 0x1 0x0>; /* PB23 periph A */
+ };
+
+ pinctrl_usart0_ri: usart0_ri-0 {
+ atmel,pins =
+ <1 25 0x1 0x0>; /* PB25 periph A */
+ };
+ };
- pioC: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <2 6 0x1 0x1 /* PB6 periph A with pullup */
+ 2 7 0x1 0x0>; /* PB7 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <1 28 0x1 0x0>; /* PB28 periph A */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <1 29 0x1 0x0>; /* PB29 periph A */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <1 8 0x1 0x1 /* PB8 periph A with pullup */
+ 1 9 0x1 0x0>; /* PB9 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <0 4 0x1 0x0>; /* PA4 periph A */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <0 5 0x1 0x0>; /* PA5 periph A */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <2 10 0x1 0x1 /* PB10 periph A with pullup */
+ 2 11 0x1 0x0>; /* PB11 periph A */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <3 8 0x2 0x0>; /* PB8 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <3 10 0x2 0x0>; /* PB10 periph B */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <0 31 0x2 0x1 /* PA31 periph B with pullup */
+ 0 30 0x2 0x0>; /* PA30 periph B */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <2 12 0x1 0x1 /* PB12 periph A with pullup */
+ 2 13 0x1 0x0>; /* PB13 periph A */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */
+ 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0 /* PA19 periph A */
+ 0 20 0x1 0x0 /* PA20 periph A */
+ 0 21 0x1 0x0>; /* PA21 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 22 0x2 0x0 /* PA22 periph B */
+ 0 23 0x2 0x0 /* PA23 periph B */
+ 0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0 /* PA26 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+
+ pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
+ atmel,pins =
+ <0 10 0x2 0x0 /* PA10 periph B */
+ 0 11 0x2 0x0 /* PA11 periph B */
+ 0 24 0x2 0x0 /* PA24 periph B */
+ 0 25 0x2 0x0 /* PA25 periph B */
+ 0 26 0x2 0x0 /* PA26 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0>; /* PA29 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 8 0x1 0x0>; /* PA8 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 6 0x1 0x1>; /* PA6 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 9 0x1 0x1 /* PA9 periph A with pullup */
+ 0 10 0x1 0x1 /* PA10 periph A with pullup */
+ 0 11 0x1 0x1>; /* PA11 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 1 0x2 0x1 /* PA1 periph B with pullup */
+ 0 0 0x2 0x1>; /* PA0 periph B with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 5 0x2 0x1 /* PA5 periph B with pullup */
+ 0 4 0x2 0x1 /* PA4 periph B with pullup */
+ 0 3 0x2 0x1>; /* PA3 periph B with pullup */
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
interrupts = <6 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
interrupts = <23 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
- usart4: serial@fffd4000 {
+ uart0: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
interrupts = <24 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
status = "disabled";
};
- usart5: serial@fffd8000 {
+ uart1: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
interrupts = <25 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "disabled";
};
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>;
interrupts = <21 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
status = "disabled";
};
+ mmc0: mmc@fffa8000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffa8000 0x600>;
+ interrupts = <9 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
trigger-external;
};
};
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 13 0
&pioC 14 0
0
reg = <0xfffffd10 0x10>;
};
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
- pioB: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ atmel,mux-mask = <
+ /* A B */
+ 0xfffffffb 0xffffe07f /* pioA */
+ 0x0007ffff 0x39072fff /* pioB */
+ 0xffffffff 0x3ffffff8 /* pioC */
+ 0xfffffbff 0xffffffff /* pioD */
+ 0xffe00fff 0xfbfcff00 /* pioE */
+ >;
- pioC: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <2 30 0x1 0x0 /* PC30 periph A */
+ 2 31 0x1 0x1>; /* PC31 periph with pullup */
+ };
+ };
- pioD: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <0 26 0x1 0x1 /* PA26 periph A with pullup */
+ 0 27 0x1 0x0>; /* PA27 periph A */
+ };
- pioE: gpio@fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <0 28 0x1 0x0>; /* PA28 periph A */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <0 29 0x1 0x0>; /* PA29 periph A */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <3 0 0x1 0x1 /* PD0 periph A with pullup */
+ 3 1 0x1 0x0>; /* PD1 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <3 7 0x2 0x0>; /* PD7 periph B */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <3 8 0x2 0x0>; /* PD8 periph B */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <3 2 0x1 0x1 /* PD2 periph A with pullup */
+ 3 3 0x1 0x0>; /* PD3 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <3 5 0x2 0x0>; /* PD5 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <4 6 0x2 0x0>; /* PD6 periph B */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/
+ 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <2 25 0x2 0x0 /* PC25 periph B */
+ 4 21 0x1 0x0 /* PE21 periph A */
+ 4 23 0x1 0x0 /* PE23 periph A */
+ 4 24 0x1 0x0 /* PE24 periph A */
+ 4 25 0x1 0x0 /* PE25 periph A */
+ 4 26 0x1 0x0 /* PE26 periph A */
+ 4 27 0x1 0x0 /* PE27 periph A */
+ 4 28 0x1 0x0 /* PE28 periph A */
+ 4 29 0x1 0x0 /* PE29 periph A */
+ 4 30 0x1 0x0>; /* PE30 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <2 20 0x2 0x0 /* PC20 periph B */
+ 2 21 0x2 0x0 /* PC21 periph B */
+ 2 22 0x2 0x0 /* PC22 periph B */
+ 2 23 0x2 0x0 /* PC23 periph B */
+ 2 24 0x2 0x0 /* PC24 periph B */
+ 2 25 0x2 0x0 /* PC25 periph B */
+ 2 27 0x2 0x0 /* PC27 periph B */
+ 4 22 0x2 0x0>; /* PE22 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <0 12 0x1 0x0>; /* PA12 periph A */
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 0 0x1 0x1>; /* PA0 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 17 0x1 0x1>; /* PA17 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_clk: mmc1_clk-0 {
+ atmel,pins =
+ <0 6 0x1 0x0>; /* PA6 periph A */
+ };
+
+ pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1>; /* PA8 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 9 0x1 0x1 /* PA9 periph A with pullup */
+ 0 10 0x1 0x1 /* PA10 periph A with pullup */
+ 0 11 0x1 0x1>; /* PA11 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
+ atmel,pins =
+ <0 21 0x1 0x1 /* PA21 periph A with pullup */
+ 0 22 0x1 0x1>; /* PA22 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
+ atmel,pins =
+ <0 23 0x1 0x1 /* PA23 periph A with pullup */
+ 0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1>; /* PA25 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <21 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
status = "disabled";
};
+ mmc0: mmc@fff80000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff80000 0x600>;
+ interrupts = <10 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@fff84000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff84000 0x600>;
+ interrupts = <11 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
++
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioA 22 0
&pioD 15 0
0
interrupts = <21 4 0>;
};
- pioA: gpio@fffff200 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff200 0x100>;
- interrupts = <2 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc003ff /* pioA */
+ 0xffffffff 0x800f8f00 /* pioB */
+ 0xffffffff 0x00000e00 /* pioC */
+ 0xffffffff 0xff0c1381 /* pioD */
+ 0xffffffff 0x81ffff81 /* pioE */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A */
+ 1 13 0x1 0x0>; /* PB13 periph A */
+ };
+ };
- pioB: gpio@fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x100>;
- interrupts = <3 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <1 19 0x1 0x1 /* PB19 periph A with pullup */
+ 1 18 0x1 0x0>; /* PB18 periph A */
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <1 17 0x2 0x0>; /* PB17 periph B */
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <1 15 0x2 0x0>; /* PB15 periph B */
+ };
+ };
- pioC: gpio@fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x100>;
- interrupts = <4 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ uart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <1 4 0x1 0x1 /* PB4 periph A with pullup */
+ 1 5 0x1 0x0>; /* PB5 periph A */
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <3 16 0x1 0x0>; /* PD16 periph A */
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <3 17 0x1 0x0>; /* PD17 periph A */
+ };
+ };
- pioD: gpio@fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <1 6 0x1 0x1 /* PB6 periph A with pullup */
+ 1 7 0x1 0x0>; /* PB7 periph A */
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <2 9 0x2 0x0>; /* PC9 periph B */
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <2 11 0x2 0x0>; /* PC11 periph B */
+ };
+ };
- pioE: gpio@fffffa00 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffffa00 0x100>;
- interrupts = <5 4 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <1 8 0x1 0x1 /* PB9 periph A with pullup */
+ 1 9 0x1 0x0>; /* PB8 periph A */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <0 23 0x2 0x0>; /* PA23 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <0 24 0x2 0x0>; /* PA24 periph B */
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/
+ 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
+ };
+ };
+
+ macb {
+ pinctrl_macb_rmii: macb_rmii-0 {
+ atmel,pins =
+ <0 10 0x1 0x0 /* PA10 periph A */
+ 0 11 0x1 0x0 /* PA11 periph A */
+ 0 12 0x1 0x0 /* PA12 periph A */
+ 0 13 0x1 0x0 /* PA13 periph A */
+ 0 14 0x1 0x0 /* PA14 periph A */
+ 0 15 0x1 0x0 /* PA15 periph A */
+ 0 16 0x1 0x0 /* PA16 periph A */
+ 0 17 0x1 0x0 /* PA17 periph A */
+ 0 18 0x1 0x0 /* PA18 periph A */
+ 0 19 0x1 0x0>; /* PA19 periph A */
+ };
+
+ pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+ atmel,pins =
+ <0 6 0x2 0x0 /* PA6 periph B */
+ 0 7 0x2 0x0 /* PA7 periph B */
+ 0 8 0x2 0x0 /* PA8 periph B */
+ 0 9 0x2 0x0 /* PA9 periph B */
+ 0 27 0x2 0x0 /* PA27 periph B */
+ 0 28 0x2 0x0 /* PA28 periph B */
+ 0 29 0x2 0x0 /* PA29 periph B */
+ 0 30 0x2 0x0>; /* PA30 periph B */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A */
+ 0 1 0x1 0x1 /* PA1 periph A with pullup */
+ 0 2 0x1 0x1>; /* PA2 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 3 0x1 0x1 /* PA3 periph A with pullup */
+ 0 4 0x1 0x1 /* PA4 periph A with pullup */
+ 0 5 0x1 0x1>; /* PA5 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 6 0x1 0x1 /* PA6 periph A with pullup */
+ 0 7 0x1 0x1 /* PA7 periph A with pullup */
+ 0 8 0x1 0x1 /* PA8 periph A with pullup */
+ 0 9 0x1 0x1>; /* PA9 periph A with pullup */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 31 0x1 0x0 /* PA31 periph A */
+ 0 22 0x1 0x1 /* PA22 periph A with pullup */
+ 0 23 0x1 0x1>; /* PA23 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 24 0x1 0x1 /* PA24 periph A with pullup */
+ 0 25 0x1 0x1 /* PA25 periph A with pullup */
+ 0 26 0x1 0x1>; /* PA26 periph A with pullup */
+ };
+
+ pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 27 0x1 0x1 /* PA27 periph A with pullup */
+ 0 28 0x1 0x1 /* PA28 periph A with pullup */
+ 0 29 0x1 0x1 /* PA29 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA30 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x200>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
};
interrupts = <7 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
status = "disabled";
};
interrupts = <8 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
status = "disabled";
};
interrupts = <9 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
status = "disabled";
};
interrupts = <10 4 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
status = "disabled";
};
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
};
};
};
+ mmc0: mmc@fff80000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfff80000 0x600>;
+ interrupts = <11 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@fffd0000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffd0000 0x600>;
+ interrupts = <29 4 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
++ };
++
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ status = "disabled";
};
};
>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioC 8 0
&pioC 14 0
0
reg = <0x80157450 0xC>;
};
+ thermal@801573c0 {
+ compatible = "stericsson,db8500-thermal";
+ reg = <0x801573c0 0x40>;
+ interrupts = <21 0x4>, <22 0x4>;
+ interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+ status = "disabled";
+ };
+
db8500-prcmu-regulators {
compatible = "stericsson,db8500-prcmu-regulator";
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
regulator-compatible = "db8500_vape";
- regulator-name = "db8500-vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
regulator-compatible = "db8500_varm";
- regulator-name = "db8500-varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
regulator-compatible = "db8500_vmodem";
- regulator-name = "db8500-vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
regulator-compatible = "db8500_vpll";
- regulator-name = "db8500-vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-compatible = "db8500_vsmps1";
- regulator-name = "db8500-vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-compatible = "db8500_vsmps2";
- regulator-name = "db8500-vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-compatible = "db8500_vsmps3";
- regulator-name = "db8500-vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
regulator-compatible = "db8500_vrf1";
- regulator-name = "db8500-vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-compatible = "db8500_sva_mmdsp";
- regulator-name = "db8500-sva-mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-compatible = "db8500_sva_mmdsp_ret";
- regulator-name = "db8500-sva-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-compatible = "db8500_sva_pipe";
- regulator-name = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-compatible = "db8500_sia_mmdsp";
- regulator-name = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
- regulator-name = "db8500-sia-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-compatible = "db8500_sia_pipe";
- regulator-name = "db8500-sia-pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
regulator-compatible = "db8500_sga";
- regulator-name = "db8500-sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-compatible = "db8500_b2r2_mcde";
- regulator-name = "db8500-b2r2-mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
regulator-compatible = "db8500_esram12";
- regulator-name = "db8500-esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-compatible = "db8500_esram12_ret";
- regulator-name = "db8500-esram12-ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
regulator-compatible = "db8500_esram34";
- regulator-name = "db8500-esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-compatible = "db8500_esram34_ret";
- regulator-name = "db8500-esram34-ret";
};
};
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-compatible = "ab8500_ldo_aux1";
- regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-compatible = "ab8500_ldo_aux2";
- regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-compatible = "ab8500_ldo_aux3";
- regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
regulator-compatible = "ab8500_ldo_initcore";
- regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-compatible = "ab8500_ldo_tvout";
- regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-compatible = "ab8500_ldo_usb";
- regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-compatible = "ab8500_ldo_audio";
- regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
- regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
regulator-compatible = "ab8500_ldo_amamic2";
- regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-compatible = "ab8500_ldo_dmic";
- regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-compatible = "ab8500_ldo_ana";
- regulator-name = "V-CSI/DSI";
};
};
};
status = "disabled";
};
- sdi@80126000 {
+ sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
status = "disabled";
};
- sdi@80118000 {
+ sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
- sdi@80005000 {
+ sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
- sdi@80119000 {
+ sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
- sdi@80114000 {
+ sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
- sdi@80008000 {
+ sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
interrupts = <0 100 0x4>;
status = "disabled";
};
+ cpufreq-cooling {
+ compatible = "stericsson,db8500-cpufreq-cooling";
+ status = "disabled";
+ };
+
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2600000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ status = "disabled";
+ };
};
};
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &i2c_7;
+ };
+
+ pd_mfc: mfc-power-domain@10023C40 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C40 0x20>;
+ };
+
+ pd_g3d: g3d-power-domain@10023C60 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C60 0x20>;
+ };
+
+ pd_lcd0: lcd0-power-domain@10023C80 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C80 0x20>;
+ };
+
+ pd_tv: tv-power-domain@10023C20 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C20 0x20>;
+ };
+
+ pd_cam: cam-power-domain@10023C00 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C00 0x20>;
+ };
+
+ pd_gps: gps-power-domain@10023CE0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023CE0 0x20>;
};
gic:interrupt-controller@10490000 {
status = "disabled";
};
- i2c@13860000 {
+ i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@13870000 {
+ i2c_1: i2c@13870000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@13880000 {
+ i2c_2: i2c@13880000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@13890000 {
+ i2c_3: i2c@13890000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@138A0000 {
+ i2c_4: i2c@138A0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@138B0000 {
+ i2c_5: i2c@138B0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@138C0000 {
+ i2c_6: i2c@138C0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
status = "disabled";
};
- i2c@138D0000 {
+ i2c_7: i2c@138D0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
};
+
+ mdma1: mdma@12850000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12850000 0x1000>;
+ interrupts = <0 34 0>;
+ };
};
};
fsl,pull-up = <0>;
};
+ pwm3_pins_a: pwm3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
pwm4_pins_a: pwm4@0 {
reg = <0>;
fsl,pinmux-ids = <
fsl,pull-up = <0>;
};
+ lcdif_16bit_pins_a: lcdif-16bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
can0_pins_a: can0@0 {
reg = <0>;
fsl,pinmux-ids = <
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
+ fsl,auart-dma-channel = <8 9>;
clocks = <&clks 45>;
status = "disabled";
};
interrupt-parent = <&tzic>;
ranges;
+ ipu: ipu@40000000 {
+ #crtc-cells = <1>;
+ compatible = "fsl,imx51-ipu";
+ reg = <0x40000000 0x20000000>;
+ interrupts = <11 10>;
+ };
+
aips@70000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
reg = <0x70000000 0x40000>;
ranges;
- esdhc@70004000 { /* ESDHC1 */
+ esdhc1: esdhc@70004000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
+ clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clock-names = "ipg", "ahb", "per";
status = "disabled";
};
- esdhc@70008000 { /* ESDHC2 */
+ esdhc2: esdhc@70008000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
+ clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
+ clocks = <&clks 32>, <&clks 33>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- ecspi@70010000 { /* ECSPI1 */
+ ecspi1: ecspi@70010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
reg = <0x70010000 0x4000>;
interrupts = <36>;
+ clocks = <&clks 51>, <&clks 52>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
+ clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
- esdhc@70020000 { /* ESDHC3 */
+ esdhc3: esdhc@70020000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
+ clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- esdhc@70024000 { /* ESDHC4 */
+ esdhc4: esdhc@70024000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
+ clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
};
- usb@73f80000 {
+ usbotg: usb@73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
- usb@73f80200 {
+ usbh1: usb@73f80200 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
- usb@73f80400 {
+ usbh2: usb@73f80400 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
- usb@73f80600 {
+ usbh3: usb@73f80600 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80600 0x0200>;
interrupts = <17>;
#interrupt-cells = <2>;
};
- wdog@73f98000 { /* WDOG1 */
+ wdog1: wdog@73f98000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
+ clocks = <&clks 0>;
};
- wdog@73f9c000 { /* WDOG2 */
+ wdog2: wdog@73f9c000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
+ clocks = <&clks 0>;
status = "disabled";
};
- iomuxc@73fa8000 {
+ iomuxc: iomuxc@73fa8000 {
compatible = "fsl,imx51-iomuxc";
reg = <0x73fa8000 0x4000>;
};
};
+ ipu_disp1 {
+ pinctrl_ipu_disp1_1: ipudisp1grp-1 {
+ fsl,pins = <
+ 528 0x5 /* MX51_PAD_DISP1_DAT0__DISP1_DAT0 */
+ 529 0x5 /* MX51_PAD_DISP1_DAT1__DISP1_DAT1 */
+ 530 0x5 /* MX51_PAD_DISP1_DAT2__DISP1_DAT2 */
+ 531 0x5 /* MX51_PAD_DISP1_DAT3__DISP1_DAT3 */
+ 532 0x5 /* MX51_PAD_DISP1_DAT4__DISP1_DAT4 */
+ 533 0x5 /* MX51_PAD_DISP1_DAT5__DISP1_DAT5 */
+ 535 0x5 /* MX51_PAD_DISP1_DAT6__DISP1_DAT6 */
+ 537 0x5 /* MX51_PAD_DISP1_DAT7__DISP1_DAT7 */
+ 539 0x5 /* MX51_PAD_DISP1_DAT8__DISP1_DAT8 */
+ 541 0x5 /* MX51_PAD_DISP1_DAT9__DISP1_DAT9 */
+ 543 0x5 /* MX51_PAD_DISP1_DAT10__DISP1_DAT10 */
+ 545 0x5 /* MX51_PAD_DISP1_DAT11__DISP1_DAT11 */
+ 547 0x5 /* MX51_PAD_DISP1_DAT12__DISP1_DAT12 */
+ 549 0x5 /* MX51_PAD_DISP1_DAT13__DISP1_DAT13 */
+ 551 0x5 /* MX51_PAD_DISP1_DAT14__DISP1_DAT14 */
+ 553 0x5 /* MX51_PAD_DISP1_DAT15__DISP1_DAT15 */
+ 555 0x5 /* MX51_PAD_DISP1_DAT16__DISP1_DAT16 */
+ 557 0x5 /* MX51_PAD_DISP1_DAT17__DISP1_DAT17 */
+ 559 0x5 /* MX51_PAD_DISP1_DAT18__DISP1_DAT18 */
+ 563 0x5 /* MX51_PAD_DISP1_DAT19__DISP1_DAT19 */
+ 567 0x5 /* MX51_PAD_DISP1_DAT20__DISP1_DAT20 */
+ 571 0x5 /* MX51_PAD_DISP1_DAT21__DISP1_DAT21 */
+ 575 0x5 /* MX51_PAD_DISP1_DAT22__DISP1_DAT22 */
+ 579 0x5 /* MX51_PAD_DISP1_DAT23__DISP1_DAT23 */
+ 584 0x5 /* MX51_PAD_DI1_PIN2__DI1_PIN2 (hsync) */
+ 583 0x5 /* MX51_PAD_DI1_PIN3__DI1_PIN3 (vsync) */
+ >;
+ };
+ };
+
+ ipu_disp2 {
+ pinctrl_ipu_disp2_1: ipudisp2grp-1 {
+ fsl,pins = <
+ 603 0x5 /* MX51_PAD_DISP2_DAT0__DISP2_DAT0 */
+ 608 0x5 /* MX51_PAD_DISP2_DAT1__DISP2_DAT1 */
+ 613 0x5 /* MX51_PAD_DISP2_DAT2__DISP2_DAT2 */
+ 614 0x5 /* MX51_PAD_DISP2_DAT3__DISP2_DAT3 */
+ 615 0x5 /* MX51_PAD_DISP2_DAT4__DISP2_DAT4 */
+ 616 0x5 /* MX51_PAD_DISP2_DAT5__DISP2_DAT5 */
+ 617 0x5 /* MX51_PAD_DISP2_DAT6__DISP2_DAT6 */
+ 622 0x5 /* MX51_PAD_DISP2_DAT7__DISP2_DAT7 */
+ 627 0x5 /* MX51_PAD_DISP2_DAT8__DISP2_DAT8 */
+ 633 0x5 /* MX51_PAD_DISP2_DAT9__DISP2_DAT9 */
+ 637 0x5 /* MX51_PAD_DISP2_DAT10__DISP2_DAT10 */
+ 643 0x5 /* MX51_PAD_DISP2_DAT11__DISP2_DAT11 */
+ 648 0x5 /* MX51_PAD_DISP2_DAT12__DISP2_DAT12 */
+ 652 0x5 /* MX51_PAD_DISP2_DAT13__DISP2_DAT13 */
+ 656 0x5 /* MX51_PAD_DISP2_DAT14__DISP2_DAT14 */
+ 661 0x5 /* MX51_PAD_DISP2_DAT15__DISP2_DAT15 */
+ 593 0x5 /* MX51_PAD_DI2_PIN2__DI2_PIN2 (hsync) */
+ 595 0x5 /* MX51_PAD_DI2_PIN3__DI2_PIN3 (vsync) */
+ 597 0x5 /* MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK */
+ 599 0x5 /* MX51_PAD_DI_GP4__DI2_PIN15 */
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
};
};
+ pwm1: pwm@73fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+ reg = <0x73fb4000 0x4000>;
+ clocks = <&clks 37>, <&clks 38>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@73fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
+ reg = <0x73fb8000 0x4000>;
+ clocks = <&clks 39>, <&clks 40>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
+ clocks = <&clks 28>, <&clks 29>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
+ clocks = <&clks 30>, <&clks 31>;
+ clock-names = "ipg", "per";
status = "disabled";
};
+
+ clks: ccm@73fd4000{
+ compatible = "fsl,imx51-ccm";
+ reg = <0x73fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
};
aips@80000000 { /* AIPS2 */
reg = <0x80000000 0x10000000>;
ranges;
- ecspi@83fac000 { /* ECSPI2 */
+ ecspi2: ecspi@83fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
reg = <0x83fac000 0x4000>;
interrupts = <37>;
+ clocks = <&clks 53>, <&clks 54>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- sdma@83fb0000 {
+ sdma: sdma@83fb0000 {
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
+ clocks = <&clks 56>, <&clks 56>;
+ clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
- cspi@83fc0000 {
+ cspi: cspi@83fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
+ clocks = <&clks 55>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- i2c@83fc4000 { /* I2C2 */
+ i2c2: i2c@83fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
+ clocks = <&clks 35>;
status = "disabled";
};
- i2c@83fc8000 { /* I2C1 */
+ i2c1: i2c@83fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
+ clocks = <&clks 34>;
status = "disabled";
};
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
+ clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
- audmux@83fd0000 {
+ audmux: audmux@83fd0000 {
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
reg = <0x83fd0000 0x4000>;
status = "disabled";
};
- nand@83fdb000 {
+ nfc: nand@83fdb000 {
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
+ clocks = <&clks 60>;
status = "disabled";
};
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
+ clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
- ethernet@83fec000 {
+ fec: ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
+ clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
interrupt-parent = <&tzic>;
ranges;
+ ipu: ipu@18000000 {
+ #crtc-cells = <1>;
+ compatible = "fsl,imx53-ipu";
+ reg = <0x18000000 0x080000000>;
+ interrupts = <11 10>;
+ };
+
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
- esdhc@50004000 { /* ESDHC1 */
+ esdhc1: esdhc@50004000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
+ clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- esdhc@50008000 { /* ESDHC2 */
+ esdhc2: esdhc@50008000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
+ clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
+ clocks = <&clks 32>, <&clks 33>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- ecspi@50010000 { /* ECSPI1 */
+ ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
+ clocks = <&clks 51>, <&clks 52>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
+ clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
- esdhc@50020000 { /* ESDHC3 */
+ esdhc3: esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
+ clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- esdhc@50024000 { /* ESDHC4 */
+ esdhc4: esdhc@50024000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
+ clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
};
- usb@53f80000 {
+ usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
- usb@53f80200 {
+ usbh1: usb@53f80200 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
- usb@53f80400 {
+ usbh2: usb@53f80400 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
- usb@53f80600 {
+ usbh3: usb@53f80600 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
#interrupt-cells = <2>;
};
- wdog@53f98000 { /* WDOG1 */
+ wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
+ clocks = <&clks 0>;
};
- wdog@53f9c000 { /* WDOG2 */
+ wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
+ clocks = <&clks 0>;
status = "disabled";
};
- iomuxc@53fa8000 {
+ iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
};
};
+ can1 {
+ pinctrl_can1_1: can1grp-1 {
+ fsl,pins = <
+ 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
+ 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
+ >;
+ };
+ };
+
+ can2 {
+ pinctrl_can2_1: can2grp-1 {
+ fsl,pins = <
+ 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
+ 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
+ >;
+ };
+ };
+
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
};
};
+ i2c3 {
+ pinctrl_i2c3_1: i2c3grp-1 {
+ fsl,pins = <
+ 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */
+ 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
>;
};
};
+
+ uart4 {
+ pinctrl_uart4_1: uart4grp-1 {
+ fsl,pins = <
+ 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
+ 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
+ >;
+ };
+ };
+
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
+ 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
+ >;
+ };
+ };
+
};
+ pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks 37>, <&clks 38>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@53fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb8000 0x4000>;
+ clocks = <&clks 39>, <&clks 40>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
+ clocks = <&clks 28>, <&clks 29>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
+ clocks = <&clks 30>, <&clks 31>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
+ clocks = <&clks 158>, <&clks 157>;
+ clock-names = "ipg", "per";
status = "disabled";
};
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
+ clocks = <&clks 158>, <&clks 157>;
+ clock-names = "ipg", "per";
status = "disabled";
};
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx53-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
#interrupt-cells = <2>;
};
- i2c@53fec000 { /* I2C3 */
+ i2c3: i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
+ clocks = <&clks 88>;
status = "disabled";
};
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
+ clocks = <&clks 65>, <&clks 66>;
+ clock-names = "ipg", "per";
status = "disabled";
};
};
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
+ clocks = <&clks 67>, <&clks 68>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- ecspi@63fac000 { /* ECSPI2 */
+ ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
+ clocks = <&clks 53>, <&clks 54>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- sdma@63fb0000 {
+ sdma: sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
+ clocks = <&clks 56>, <&clks 56>;
+ clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
- cspi@63fc0000 {
+ cspi: cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
+ clocks = <&clks 55>, <&clks 0>;
+ clock-names = "ipg", "per";
status = "disabled";
};
- i2c@63fc4000 { /* I2C2 */
+ i2c2: i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
+ clocks = <&clks 35>;
status = "disabled";
};
- i2c@63fc8000 { /* I2C1 */
+ i2c1: i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
+ clocks = <&clks 34>;
status = "disabled";
};
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
+ clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
- audmux@63fd0000 {
+ audmux: audmux@63fd0000 {
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
- nand@63fdb000 {
+ nfc: nand@63fdb000 {
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
+ clocks = <&clks 60>;
status = "disabled";
};
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
+ clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
- ethernet@63fec000 {
+ fec: ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
+ clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 792000 1100000
+ 396000 950000
+ 198000 850000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ cpu0-supply = <®_cpu>;
};
cpu@1 {
clocks = <&clks 106>;
};
- gpmi-nand@00112000 {
+ nfc: gpmi-nand@00112000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
- spdif@02004000 {
+ spdif: spdif@02004000 {
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
};
- ecspi@02008000 { /* eCSPI1 */
+ ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi@0200c000 { /* eCSPI2 */
+ ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi@02010000 { /* eCSPI3 */
+ ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi@02014000 { /* eCSPI4 */
+ ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi@02018000 { /* eCSPI5 */
+ ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- esai@02024000 {
+ esai: esai@02024000 {
reg = <0x02024000 0x4000>;
interrupts = <0 51 0x04>;
};
status = "disabled";
};
- asrc@02034000 {
+ asrc: asrc@02034000 {
reg = <0x02034000 0x4000>;
interrupts = <0 50 0x04>;
};
};
};
- vpu@02040000 {
+ vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
interrupts = <0 3 0x04 0 12 0x04>;
};
reg = <0x0207c000 0x4000>;
};
- pwm@02080000 { /* PWM1 */
+ pwm1: pwm@02080000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 0x04>;
+ clocks = <&clks 62>, <&clks 145>;
+ clock-names = "ipg", "per";
};
- pwm@02084000 { /* PWM2 */
+ pwm2: pwm@02084000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 0x04>;
+ clocks = <&clks 62>, <&clks 146>;
+ clock-names = "ipg", "per";
};
- pwm@02088000 { /* PWM3 */
+ pwm3: pwm@02088000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 0x04>;
+ clocks = <&clks 62>, <&clks 147>;
+ clock-names = "ipg", "per";
};
- pwm@0208c000 { /* PWM4 */
+ pwm4: pwm@0208c000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 0x04>;
+ clocks = <&clks 62>, <&clks 148>;
+ clock-names = "ipg", "per";
};
- flexcan@02090000 { /* CAN1 */
+ can1: flexcan@02090000 {
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
};
- flexcan@02094000 { /* CAN2 */
+ can2: flexcan@02094000 {
reg = <0x02094000 0x4000>;
interrupts = <0 111 0x04>;
};
- gpt@02098000 {
+ gpt: gpt@02098000 {
compatible = "fsl,imx6q-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
#interrupt-cells = <2>;
};
- kpp@020b8000 {
+ kpp: kpp@020b8000 {
reg = <0x020b8000 0x4000>;
interrupts = <0 82 0x04>;
};
- wdog@020bc000 { /* WDOG1 */
+ wdog1: wdog@020bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
clocks = <&clks 0>;
};
- wdog@020c0000 { /* WDOG2 */
+ wdog2: wdog@020c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
anatop-max-voltage = <2750000>;
};
- regulator-vddcore@140 {
+ reg_cpu: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
};
snvs@020cc000 {
- reg = <0x020cc000 0x4000>;
- interrupts = <0 19 0x04 0 20 0x04>;
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
};
- epit@020d0000 { /* EPIT1 */
+ epit1: epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
interrupts = <0 56 0x04>;
};
- epit@020d4000 { /* EPIT2 */
+ epit2: epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
interrupts = <0 57 0x04>;
};
- src@020d8000 {
+ src: src@020d8000 {
compatible = "fsl,imx6q-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
};
- gpc@020dc000 {
+ gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 0x04 0 90 0x04>;
reg = <0x020e0000 0x38>;
};
- iomuxc@020e0000 {
+ iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */
70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */
48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */
+ 1033 0x4001b0a8 /* MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT*/
>;
};
};
};
- dcic@020e4000 { /* DCIC1 */
+ dcic1: dcic@020e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 124 0x04>;
};
- dcic@020e8000 { /* DCIC2 */
+ dcic2: dcic@020e8000 {
reg = <0x020e8000 0x4000>;
interrupts = <0 125 0x04>;
};
- sdma@020ec000 {
+ sdma: sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
reg = <0x0217c000 0x4000>;
};
- usb@02184000 { /* USB OTG */
+ usbotg: usb@02184000 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
status = "disabled";
};
- usb@02184200 { /* USB1 */
+ usbh1: usb@02184200 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
status = "disabled";
};
- usb@02184400 { /* USB2 */
+ usbh2: usb@02184400 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
status = "disabled";
};
- usb@02184600 { /* USB3 */
+ usbh3: usb@02184600 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks 162>;
};
- ethernet@02188000 {
+ fec: ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
- clocks = <&clks 117>, <&clks 117>;
- clock-names = "ipg", "ahb";
+ clocks = <&clks 117>, <&clks 117>, <&clks 177>;
+ clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
};
- usdhc@02190000 { /* uSDHC1 */
+ usdhc1: usdhc@02190000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
clocks = <&clks 163>, <&clks 163>, <&clks 163>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- usdhc@02194000 { /* uSDHC2 */
+ usdhc2: usdhc@02194000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
clocks = <&clks 164>, <&clks 164>, <&clks 164>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- usdhc@02198000 { /* uSDHC3 */
+ usdhc3: usdhc@02198000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
clocks = <&clks 165>, <&clks 165>, <&clks 165>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- usdhc@0219c000 { /* uSDHC4 */
+ usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
clocks = <&clks 166>, <&clks 166>, <&clks 166>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- i2c@021a0000 { /* I2C1 */
+ i2c1: i2c@021a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- i2c@021a4000 { /* I2C2 */
+ i2c2: i2c@021a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
status = "disabled";
};
- i2c@021a8000 { /* I2C3 */
+ i2c3: i2c@021a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021ac000 0x4000>;
};
- mmdc@021b0000 { /* MMDC0 */
+ mmdc0: mmdc@021b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
- mmdc@021b4000 { /* MMDC1 */
+ mmdc1: mmdc@021b4000 { /* MMDC1 */
reg = <0x021b4000 0x4000>;
};
interrupts = <0 109 0x04>;
};
- audmux@021d8000 {
+ audmux: audmux@021d8000 {
compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
status = "disabled";
};
};
+
+ ipu1: ipu@02400000 {
+ #crtc-cells = <1>;
+ compatible = "fsl,imx6q-ipu";
+ reg = <0x02400000 0x400000>;
+ interrupts = <0 6 0x4 0 5 0x4>;
+ clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+ clock-names = "bus", "di0", "di1";
+ };
+
+ ipu2: ipu@02800000 {
+ #crtc-cells = <1>;
+ compatible = "fsl,imx6q-ipu";
+ reg = <0x02800000 0x400000>;
+ interrupts = <0 8 0x4 0 7 0x4>;
+ clocks = <&clks 133>, <&clks 134>, <&clks 137>;
+ clock-names = "bus", "di0", "di1";
+ };
};
};
/ {
model = "Calao Systems Snowball platform with device tree";
- compatible = "calaosystems,snowball-a9500";
+ compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
memory {
reg = <0x00000000 0x20000000>;
status = "okay";
};
+ prcmu@80157000 {
+ thermal@801573c0 {
+ num-trips = <4>;
+
+ trip0-temp = <70000>;
+ trip0-type = "active";
+ trip0-cdev-num = <1>;
+ trip0-cdev-name0 = "thermal-cpufreq-0";
+
+ trip1-temp = <75000>;
+ trip1-type = "active";
+ trip1-cdev-num = <1>;
+ trip1-cdev-name0 = "thermal-cpufreq-0";
+
+ trip2-temp = <80000>;
+ trip2-type = "active";
+ trip2-cdev-num = <1>;
+ trip2-cdev-name0 = "thermal-cpufreq-0";
+
+ trip3-temp = <85000>;
+ trip3-type = "critical";
+ trip3-cdev-num = <0>;
+
+ status = "okay";
+ };
+ };
+
external-bus@50000000 {
status = "okay";
};
// External Micro SD slot
- sdi@80126000 {
+ sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
- bus-width = <8>;
+ bus-width = <4>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
};
// On-board eMMC
- sdi@80114000 {
+ sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
};
};
+ cpufreq-cooling {
+ status = "okay";
+ };
++
+ prcmu@80157000 {
+ db8500-prcmu-regulators {
+ db8500_vape_reg: db8500_vape {
+ regulator-name = "db8500-vape";
+ };
+
+ db8500_varm_reg: db8500_varm {
+ regulator-name = "db8500-varm";
+ };
+
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-name = "db8500-vmodem";
+ };
+
+ db8500_vpll_reg: db8500_vpll {
+ regulator-name = "db8500-vpll";
+ };
+
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-name = "db8500-vsmps1";
+ };
+
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-name = "db8500-vsmps2";
+ };
+
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-name = "db8500-vsmps3";
+ };
+
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-name = "db8500-vrf1";
+ };
+
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ db8500_sga_reg: db8500_sga {
+ regulator-name = "db8500-sga";
+ };
+
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-name = "db8500-b2r2-mcde";
+ };
+
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-name = "db8500-esram12";
+ };
+
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-name = "db8500-esram34";
+ };
+
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-name = "db8500-esram34-ret";
+ };
+ };
+
+ ab8500@5 {
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-name = "dummy";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
};
};
};
temperature-sensor@4c {
- compatible = "nct1008";
+ compatible = "onnn,nct1008";
reg = <0x4c>;
};
magnetometer@c {
- compatible = "ak8975";
+ compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <109 0x04>; /* gpio PN5 */
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ bus-width = <4>;
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
CONFIG_POWER_SUPPLY=y
CONFIG_AB8500_BM=y
CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+ CONFIG_REGULATOR_GPIO=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
depends on ARCH_EXYNOS5
select S5P_PM if PM
select S5P_SLEEP if PM
+ select S5P_DEV_MFC
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
+config SOC_EXYNOS5440
+ bool "SAMSUNG EXYNOS5440"
+ default y
+ depends on ARCH_EXYNOS5
+ select ARM_ARCH_TIMER
+ select AUTO_ZRELADDR
+ help
+ Enable EXYNOS5440 SoC support
+
config EXYNOS4_MCT
bool
default y
help
Common setup code for SYSTEM MMU in EXYNOS platforms
-config EXYNOS4_DEV_DWMCI
- bool
- help
- Compile in platform device definitions for DWMCI
-
config EXYNOS4_DEV_USB_OHCI
bool
help
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
+ default y
depends on ARCH_EXYNOS5
select ARM_AMBA
- select SOC_EXYNOS5250
select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
obj-$(CONFIG_ARCH_EXYNOS) += common.o
obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
-obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
+obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
- obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o
obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 15),
}, {
+ .name = "tmu_apbif",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
.name = "keypad",
.enable = exynos4_clk_ip_perir_ctrl,
.ctrlbit = (1 << 16),
.ctrlbit = (1 << 18),
}, {
.name = "iis",
- .devname = "samsung-i2s.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "iis",
.devname = "samsung-i2s.1",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 20),
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
}
+ static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+ {
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+ }
+
/* Core list of CMU_CPU side */
static struct clksrc_clk exynos5_clk_mout_apll = {
.nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
};
-struct clksrc_clk exynos5_clk_mout_mpll = {
+static struct clksrc_clk exynos5_clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
/* Core list of CMU_TOP side */
-struct clk *exynos5_clkset_aclk_top_list[] = {
+static struct clk *exynos5_clkset_aclk_top_list[] = {
[0] = &exynos5_clk_mout_mpll_user.clk,
[1] = &exynos5_clk_mout_bpll_user.clk,
};
-struct clksrc_sources exynos5_clkset_aclk = {
+static struct clksrc_sources exynos5_clkset_aclk = {
.sources = exynos5_clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
};
.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
};
-struct clk *exynos5_clkset_aclk_333_166_list[] = {
+static struct clk *exynos5_clkset_aclk_333_166_list[] = {
[0] = &exynos5_clk_mout_cpll.clk,
[1] = &exynos5_clk_mout_mpll_user.clk,
};
-struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
.sources = exynos5_clkset_aclk_333_166_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
};
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 24),
}, {
+ .name = "tmu_apbif",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peris_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
.name = "rtc",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peris_ctrl,
.ctrlbit = (1 << 25),
}, {
.name = "mfc",
- .devname = "s5p-mfc",
+ .devname = "s5p-mfc-v6",
.enable = exynos5_clk_ip_mfc_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "hdmi",
- .devname = "exynos4-hdmi",
+ .devname = "exynos5-hdmi",
.enable = exynos5_clk_ip_disp1_ctrl,
.ctrlbit = (1 << 6),
}, {
+ .name = "hdmiphy",
+ .devname = "exynos5-hdmi",
+ .enable = exynos5_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
.name = "mixer",
- .devname = "s5p-mixer",
+ .devname = "exynos5-mixer",
.enable = exynos5_clk_ip_disp1_ctrl,
.ctrlbit = (1 << 5),
}, {
.ctrlbit = (1 << 0),
};
-struct clk *exynos5_clkset_group_list[] = {
+static struct clk *exynos5_clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = NULL,
[2] = &exynos5_clk_sclk_hdmi24m,
[9] = &exynos5_clk_mout_cpll.clk,
};
-struct clksrc_sources exynos5_clkset_group = {
+static struct clksrc_sources exynos5_clkset_group = {
.sources = exynos5_clkset_group_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
};
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
};
-struct clksrc_clk exynos5_clk_sclk_fimd1 = {
+static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
.clk = {
.name = "sclk_fimd",
.devname = "exynos5-fb.1",
#define exynos5_clock_resume NULL
#endif
-struct syscore_ops exynos5_clock_syscore_ops = {
+static struct syscore_ops exynos5_clock_syscore_ops = {
.suspend = exynos5_clock_suspend,
.resume = exynos5_clock_resume,
};
#include <linux/sched.h>
#include <linux/serial_core.h>
#include <linux/of.h>
+#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
static const char name_exynos5250[] = "EXYNOS5250";
+static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
+static void exynos5440_map_io(void);
static void exynos4_init_clocks(int xtal);
static void exynos5_init_clocks(int xtal);
-static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos_init_uarts,
+ .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
}, {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos_init_uarts,
+ .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
}, {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos_init_uarts,
+ .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
}, {
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
.init_clocks = exynos5_init_clocks,
- .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos5250,
+ }, {
+ .idcode = EXYNOS5440_SOC_ID,
+ .idmask = EXYNOS5_SOC_MASK,
+ .map_io = exynos5440_map_io,
+ .init = exynos_init,
+ .name = name_exynos5440,
},
};
},
};
+#ifdef CONFIG_ARCH_EXYNOS5
+static struct map_desc exynos5440_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(EXYNOS5440_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+#endif
+
static struct map_desc exynos4_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS5_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
- .length = SZ_4K,
+ },
+};
+
+static struct map_desc exynos5440_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0),
+ .length = SZ_512K,
.type = MT_DEVICE,
},
};
void exynos5_restart(char mode, const char *cmd)
{
- __raw_writel(0x1, EXYNOS_SWRESET);
+ u32 val;
+ void __iomem *addr;
+
+ if (of_machine_is_compatible("samsung,exynos5250")) {
+ val = 0x1;
+ addr = EXYNOS_SWRESET;
+ } else if (of_machine_is_compatible("samsung,exynos5440")) {
+ val = (0x10 << 20) | (0x1 << 16);
+ addr = EXYNOS5440_SWRESET;
+ } else {
+ pr_err("%s: cannot support non-DT\n", __func__);
+ return;
+ }
+
+ __raw_writel(val, addr);
}
void __init exynos_init_late(void)
{
+ if (of_machine_is_compatible("samsung,exynos5440"))
+ /* to be supported later */
+ return;
+
exynos_pm_late_initcall();
}
void __init exynos_init_io(struct map_desc *mach_desc, int size)
{
+ struct map_desc *iodesc = exynos_iodesc;
+ int iodesc_sz = ARRAY_SIZE(exynos_iodesc);
+#if defined(CONFIG_OF) && defined(CONFIG_ARCH_EXYNOS5)
+ unsigned long root = of_get_flat_dt_root();
+
/* initialize the io descriptors we need for initialization */
- iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+ if (of_flat_dt_is_compatible(root, "samsung,exynos5440")) {
+ iodesc = exynos5440_iodesc;
+ iodesc_sz = ARRAY_SIZE(exynos5440_iodesc);
+ }
+#endif
+
+ iotable_init(iodesc, iodesc_sz);
+
if (mach_desc)
iotable_init(mach_desc, size);
static void __init exynos5_map_io(void)
{
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
- s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
- s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
- s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
- s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC;
-
- s3c_sdhci_setname(0, "exynos4-sdhci");
- s3c_sdhci_setname(1, "exynos4-sdhci");
- s3c_sdhci_setname(2, "exynos4-sdhci");
- s3c_sdhci_setname(3, "exynos4-sdhci");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos4_init_clocks(int xtal)
exynos4_setup_clocks();
}
+static void __init exynos5440_map_io(void)
+{
+ iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
+}
+
static void __init exynos5_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
}
#ifdef CONFIG_OF
-int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+static int __init combiner_of_init(struct device_node *np,
+ struct device_node *parent)
{
void __iomem *combiner_base;
return 0;
}
-static const struct of_device_id exynos4_dt_irq_match[] = {
+static const struct of_device_id exynos_dt_irq_match[] = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
{ .compatible = "samsung,exynos4210-combiner",
.data = combiner_of_init, },
{},
gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
#ifdef CONFIG_OF
else
- of_irq_init(exynos4_dt_irq_match);
+ of_irq_init(exynos_dt_irq_match);
#endif
if (!of_have_populated_dt())
void __init exynos5_init_irq(void)
{
#ifdef CONFIG_OF
- of_irq_init(exynos4_dt_irq_match);
+ of_irq_init(exynos_dt_irq_match);
#endif
/*
* The parameters of s5p_init_irq() are for VIC init.
{
int ret;
- if (soc_is_exynos5250())
+ if (soc_is_exynos5250() || soc_is_exynos5440())
return 0;
ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
/* uart registration process */
-static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- if (soc_is_exynos5250())
- s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
- else
- s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
static void __iomem *exynos_eint_base;
struct irq_chip *chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
- chip->irq_mask(&desc->irq_data);
-
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
-
generic_handle_irq(*irq_data);
-
- chip->irq_unmask(&desc->irq_data);
chained_irq_exit(chip, desc);
}
* platforms switch over to using the pinctrl driver, the wakeup
* interrupt support code here can be completely removed.
*/
+ static const struct of_device_id exynos_pinctrl_ids[] = {
+ { .compatible = "samsung,pinctrl-exynos4210", },
+ { .compatible = "samsung,pinctrl-exynos4x12", },
+ };
struct device_node *pctrl_np, *wkup_np;
- const char *pctrl_compat = "samsung,pinctrl-exynos4210";
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
- for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+ for_each_matching_node(pctrl_np, exynos_pinctrl_ids) {
if (of_device_is_available(pctrl_np)) {
wkup_np = of_find_compatible_node(pctrl_np, NULL,
wkup_compat);
}
}
#endif
+ if (soc_is_exynos5440())
+ return 0;
if (soc_is_exynos5250())
exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
+ #define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4)
+ #define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4)
+
#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
-#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
-#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
-#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
-#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
-#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126)
#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
+/* EXYNOS5440 */
+
+#define EXYNOS5440_IRQ_UART0 IRQ_SPI(2)
+#define EXYNOS5440_IRQ_UART1 IRQ_SPI(3)
+
#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
#define EXYNOS_PA_CHIPID 0x10000000
+#define EXYNOS5440_PA_CHIPID 0x00160000
#define EXYNOS4_PA_SYSCON 0x10010000
#define EXYNOS5_PA_SYSCON 0x10050100
#define EXYNOS4_PA_TWD 0x10500600
#define EXYNOS4_PA_L2CC 0x10502000
+ #define EXYNOS4_PA_TMU 0x100C0000
+
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12850000
+#define EXYNOS4_PA_S_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
#define EXYNOS5_PA_UART1 0x12C10000
#define EXYNOS5_PA_UART2 0x12C20000
#define EXYNOS5_PA_UART3 0x12C30000
-#define EXYNOS5_SZ_UART SZ_256
+
+#define EXYNOS5440_PA_UART0 0x000B0000
+#define EXYNOS5440_PA_UART1 0x000C0000
+#define EXYNOS5440_SZ_UART SZ_256
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
"exynos4210-spi.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
+ "exynos-tmu", NULL),
{},
};
static char const *exynos4_dt_compat[] __initdata = {
"samsung,exynos4210",
+ "samsung,exynos4212",
+ "samsung,exynos4412",
NULL
};
*/
#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <linux/serial_core.h>
+ #include <linux/memblock.h>
+ #include <linux/of_fdt.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
+ #include <plat/mfc.h>
#include "common.h"
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
+ "s3c2440-i2c.2", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
+ "s3c2440-i2c.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
+ "s3c2440-i2c.4", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
+ "s3c2440-i2c.5", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
+ "s3c2440-i2c.6", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
+ "s3c2440-i2c.7", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
+ "s3c2440-hdmiphy-i2c", NULL),
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
"dw_mmc.0", NULL),
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
"exynos4210-spi.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
"exynos4210-spi.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
+ "exynos5-sata", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
+ "exynos5-sata-phy", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
+ "exynos5-sata-phy-i2c", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
"exynos-gsc.2", NULL),
OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
"exynos-gsc.3", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
+ "exynos5-hdmi", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
+ "exynos5-mixer", NULL),
+ OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
+ "exynos-tmu", NULL),
{},
};
-static void __init exynos5250_dt_map_io(void)
+static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
+ "exynos4210-uart.0", NULL),
+ {},
+};
+
+static void __init exynos5_dt_map_io(void)
{
+ unsigned long root = of_get_flat_dt_root();
+
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
+
+ if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
+ s3c24xx_init_clocks(24000000);
}
-static void __init exynos5250_dt_machine_init(void)
+static void __init exynos5_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5250_auxdata_lookup, NULL);
+ if (of_machine_is_compatible("samsung,exynos5250"))
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos5250_auxdata_lookup, NULL);
+ else if (of_machine_is_compatible("samsung,exynos5440"))
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos5440_auxdata_lookup, NULL);
}
-static char const *exynos5250_dt_compat[] __initdata = {
+static char const *exynos5_dt_compat[] __initdata = {
"samsung,exynos5250",
+ "samsung,exynos5440",
NULL
};
+ static void __init exynos5_reserve(void)
+ {
+ struct s5p_mfc_dt_meminfo mfc_mem;
+
+ /* Reserve memory for MFC only if it's available */
+ mfc_mem.compatible = "samsung,mfc-v6";
+ if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+ s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+ mfc_mem.lsize);
+ }
+
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.init_irq = exynos5_init_irq,
.smp = smp_ops(exynos_smp_ops),
- .map_io = exynos5250_dt_map_io,
+ .map_io = exynos5_dt_map_io,
.handle_irq = gic_handle_irq,
- .init_machine = exynos5250_dt_machine_init,
+ .init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
- .dt_compat = exynos5250_dt_compat,
+ .dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
+ .reserve = exynos5_reserve,
MACHINE_END
#include <linux/mmc/host.h>
#include <linux/fb.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <drm/exynos_drm.h>
#include <video/platform_lcd.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
-#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_ERASE),
- .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
&cam_vdda_fixed_rdev,
&cam_8m_12v_fixed_rdev,
&exynos4_bus_devfreq,
- #ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
- #endif
};
static void __init nuri_map_io(void)
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/platform_data/usb-exynos.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/hdmi.h>
-#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
+ REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */
};
static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
+ REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */
};
static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_mixer,
- #ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
- #endif
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-serial.h>
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
- #ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
- #endif
&samsung_device_keypad,
};
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/platform_data/usb-exynos.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
-#include <linux/platform_data/usb-exynos.h>
#include <drm/exynos_drm.h>
#include "common.h"
&s5p_device_fimc_md,
&s5p_device_g2d,
&s5p_device_jpeg,
- #ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
- #endif
&exynos4_device_ac97,
&exynos4_device_i2s0,
&exynos4_device_ohci,
#include <linux/i2c-gpio.h>
#include <linux/i2c/mcs.h>
#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <drm/exynos_drm.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
-#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
&s5p_device_onenand,
&s5p_device_fimd0,
&s5p_device_jpeg,
- #ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
- #endif
&s3c_device_usb_hsotg,
&s5p_device_mfc,
&s5p_device_mfc_l,
endchoice
+ config MACH_IMX25_DT
+ bool "Support i.MX25 platforms from device tree"
+ select SOC_IMX25
+ help
+ Include support for Freescale i.MX25 based platforms
+ using the device tree for discovery
+
comment "MX27 platforms:"
config MACH_MX27ADS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MX2_CAMERA
+ select IMX_HAVE_PLATFORM_MX2_EMMA
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select LEDS_GPIO_REGISTER
select ARCH_MX5
select ARCH_MX53
select HAVE_CAN_FLEXCAN if CAN
+ select IMX_HAVE_PLATFORM_IMX2_WDT
select PINCTRL
select PINCTRL_IMX53
select SOC_IMX5
config SOC_IMX6Q
bool "i.MX6 Quad support"
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
+ select ARM_ERRATA_743622
+ select ARM_ERRATA_751472
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_775420
select ARM_GIC
select COMMON_CLK
select CPU_V7
select MFD_SYSCON
select PINCTRL
select PINCTRL_IMX6Q
+ select PL310_ERRATA_588369 if CACHE_PL310
+ select PL310_ERRATA_727915 if CACHE_PL310
+ select PL310_ERRATA_769419 if CACHE_PL310
+ select PM_OPP if PM
help
This enables support for Freescale i.MX6 Quad processor.
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_pfd1_540m", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
- pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+ pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
+ sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref,
clk_max
};
mmdc_ch0_axi, rom,
};
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
base = of_iomap(np, 0);
WARN_ON(!base);
- /* type name parent_name base gate_mask div_mask */
- clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x2000, 0x7f);
- clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x2000, 0x1);
- clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x2000, 0x3);
- clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x2000, 0x7f);
- clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x2000, 0x7f);
- clk[pll6_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll6_mlb", "osc", base + 0xd0, 0x2000, 0x0);
- clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
- clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
+ /* type name parent_name base div_mask */
+ clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
+ clk[pll8_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll8_mlb", "osc", base + 0xd0, 0x0);
clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+ clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+ clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+
+ clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+ clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+ clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+
/* name parent_name reg idx */
clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
- clk[mlb] = imx_clk_gate2("mlb", "pll6_mlb", base + 0x74, 18);
+ clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18);
clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
+ clk_register_clkdev(clk[arm], NULL, "cpu0");
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
#include "cpuidle.h"
#include "hardware.h"
+ #define IMX6Q_ANALOG_DIGPROG 0x260
+
+ static int imx6q_revision(void)
+ {
+ struct device_node *np;
+ void __iomem *base;
+ static u32 rev;
+
+ if (!rev) {
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ if (!np)
+ return IMX_CHIP_REVISION_UNKNOWN;
+ base = of_iomap(np, 0);
+ if (!base) {
+ of_node_put(np);
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
+ rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
+ iounmap(base);
+ of_node_put(np);
+ }
+
+ switch (rev & 0xff) {
+ case 0:
+ return IMX_CHIP_REVISION_1_0;
+ case 1:
+ return IMX_CHIP_REVISION_1_1;
+ case 2:
+ return IMX_CHIP_REVISION_1_2;
+ default:
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
+ }
+
void imx6q_restart(char mode, const char *cmd)
{
struct device_node *np;
imx6q_sabrelite_cko1_setup();
}
+static void __init imx6q_1588_init(void)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+ if (!IS_ERR(gpr))
+ regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21);
+ else
+ pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
+
+}
static void __init imx6q_usb_init(void)
{
struct regmap *anatop;
imx6q_pm_init();
imx6q_usb_init();
+ imx6q_1588_init();
}
static struct cpuidle_driver imx6q_cpuidle_driver = {
{
mx6q_clocks_init();
twd_local_timer_of_register();
+ imx_print_silicon_rev("i.MX6Q", imx6q_revision());
}
static struct sys_timer imx6q_timer = {
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
#include <plat/ste_dma40.h>
#include <mach/devices.h>
},
};
- /* Platform device for Ux500-PCM */
- static struct platform_device ux500_pcm = {
- .name = "ux500-pcm",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
- };
-
struct msp_i2s_platform_data msp2_platform_data = {
.id = MSP_I2S_2,
.msp_i2s_dma_rx = &msp2_dma_rx,
db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
&msp3_platform_data);
}
-
- /* Due for removal once the MSP driver has been fully DT:ed. */
- void mop500_of_audio_init(struct device *parent)
- {
- pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
- platform_device_register(&ux500_pcm);
- }
-
/*
- * Copyright (C) 2008-2009 ST-Ericsson
+ * Copyright (C) 2008-2012 ST-Ericsson
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
+#include <linux/platform_data/db8500_thermal.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/ste_dma40.h>
-#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
};
/*
+ * Thermal Sensor
+ */
+
+static struct resource db8500_thsens_resources[] = {
+ {
+ .name = "IRQ_HOTMON_LOW",
+ .start = IRQ_PRCMU_HOTMON_LOW,
+ .end = IRQ_PRCMU_HOTMON_LOW,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "IRQ_HOTMON_HIGH",
+ .start = IRQ_PRCMU_HOTMON_HIGH,
+ .end = IRQ_PRCMU_HOTMON_HIGH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct db8500_thsens_platform_data db8500_thsens_data = {
+ .trip_points[0] = {
+ .temp = 70000,
+ .type = THERMAL_TRIP_ACTIVE,
+ .cdev_name = {
+ [0] = "thermal-cpufreq-0",
+ },
+ },
+ .trip_points[1] = {
+ .temp = 75000,
+ .type = THERMAL_TRIP_ACTIVE,
+ .cdev_name = {
+ [0] = "thermal-cpufreq-0",
+ },
+ },
+ .trip_points[2] = {
+ .temp = 80000,
+ .type = THERMAL_TRIP_ACTIVE,
+ .cdev_name = {
+ [0] = "thermal-cpufreq-0",
+ },
+ },
+ .trip_points[3] = {
+ .temp = 85000,
+ .type = THERMAL_TRIP_CRITICAL,
+ },
+ .num_trips = 4,
+};
+
+static struct platform_device u8500_thsens_device = {
+ .name = "db8500-thermal",
+ .resource = db8500_thsens_resources,
+ .num_resources = ARRAY_SIZE(db8500_thsens_resources),
+ .dev = {
+ .platform_data = &db8500_thsens_data,
+ },
+};
+
+static struct platform_device u8500_cpufreq_cooling_device = {
+ .name = "db8500-cpufreq-cooling",
+};
+
+/*
* TPS61052
*/
};
#endif
- static struct pl022_ssp_controller ssp0_plat = {
+ struct pl022_ssp_controller ssp0_plat = {
.bus_id = 0,
#ifdef CONFIG_STE_DMA40
.enable_dma = 1,
};
#endif
- static struct amba_pl011_data uart0_plat = {
+ struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
#endif
};
- static struct amba_pl011_data uart1_plat = {
+ struct amba_pl011_data uart1_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart1_dma_cfg_rx,
#endif
};
- static struct amba_pl011_data uart2_plat = {
+ struct amba_pl011_data uart2_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart2_dma_cfg_rx,
&snowball_key_dev,
&snowball_sbnet_dev,
&snowball_gpio_en_3v3_regulator_dev,
+ &u8500_thsens_device,
+ &u8500_cpufreq_cooling_device,
};
static void __init mop500_init_machine(void)
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
static void __init snowball_init_machine(void)
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.init_late = ux500_init_late,
MACHINE_END
+MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = mop500_init_machine,
+ .init_late = ux500_init_late,
+MACHINE_END
+
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.atag_offset = 0x100,
.smp = smp_ops(ux500_smp_ops),
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
- .init_late = ux500_init_late,
- MACHINE_END
-
- #ifdef CONFIG_MACH_UX500_DT
-
- struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
- /* Requires call-back bindings. */
- OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
- /* Requires DMA and call-back bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
- /* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
- /* Requires clock name bindings. */
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
- /* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
- /* Requires clock name and DMA bindings. */
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
- "ux500-msp-i2s.0", &msp0_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
- "ux500-msp-i2s.1", &msp1_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
- "ux500-msp-i2s.2", &msp2_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
- "ux500-msp-i2s.3", &msp3_platform_data),
- {},
- };
-
- static const struct of_device_id u8500_local_bus_nodes[] = {
- /* only create devices below soc node */
- { .compatible = "stericsson,db8500", },
- { .compatible = "stericsson,db8500-prcmu", },
- { .compatible = "simple-bus"},
- { },
- };
-
- static void __init u8500_init_machine(void)
- {
- struct device *parent = NULL;
- int i2c0_devs;
- int i;
-
- /* Pinmaps must be in place before devices register */
- if (of_machine_is_compatible("st-ericsson,mop500"))
- mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
- snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
- hrefv60_pinmaps_init();
-
- parent = u8500_of_init_devices();
-
- for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
- mop500_platform_devs[i]->dev.parent = parent;
-
- /* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
-
- if (of_machine_is_compatible("st-ericsson,mop500")) {
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_sdi_init(parent);
- mop500_audio_init(parent);
- i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
- i2c_register_board_info(2, mop500_i2c2_devices,
- ARRAY_SIZE(mop500_i2c2_devices));
-
- mop500_uib_init();
-
- } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- mop500_of_audio_init(parent);
- } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_uib_init();
- }
-
- /* This board has full regulator constraints */
- regulator_has_full_constraints();
- }
-
- static const char * u8500_dt_board_compat[] = {
- "calaosystems,snowball-a9500",
- "st-ericsson,hrefv60+",
- "st-ericsson,u8500",
- "st-ericsson,mop500",
- NULL,
- };
-
-
- DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
- .smp = smp_ops(ux500_smp_ops),
- .map_io = u8500_map_io,
- .init_irq = ux500_init_irq,
- /* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = u8500_init_machine,
- .init_late = ux500_init_late,
- .dt_compat = u8500_dt_board_compat,
+ .init_late = NULL,
MACHINE_END
- #endif
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
- #include <linux/platform_data/usb-musb-ux500.h>
- #include <linux/platform_data/pinctrl-nomadik.h>
+ #include <linux/mfd/dbx500-prcmu.h>
+ #include <linux/of.h>
+ #include <linux/of_platform.h>
+ #include <linux/regulator/machine.h>
+#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
-#include <plat/gpio-nomadik.h>
+ #include <asm/mach/arch.h>
+ #include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
+ #include "board-mop500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
- dbx500_add_pinctrl(parent, "pinctrl-db8500");
+ dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
}
static int usb_db8500_rx_dma_cfg[] = {
{
void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+ /* Throw these device-specific numbers into the entropy pool */
+ add_device_randomness(uid, 0x14);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+1),
readl((u32 *)uid+1), readl((u32 *)uid+2),
db8500_add_gpios(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
- platform_device_register_data(parent,
- "cpufreq-ux500", -1, NULL, 0);
-
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
return parent;
}
+ #ifdef CONFIG_MACH_UX500_DT
+
/* TODO: Once all pieces are DT:ed, remove completely. */
- struct device * __init u8500_of_init_devices(void)
+ static struct device * __init u8500_of_init_devices(void)
{
- struct device *parent;
-
- parent = db8500_soc_device_init();
+ struct device *parent = db8500_soc_device_init();
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
- platform_device_register_data(parent,
- "cpufreq-ux500", -1, NULL, 0);
-
u8500_dma40_device.dev.parent = parent;
/*
return parent;
}
+
+ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ /* Requires call-back bindings. */
+ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
+ /* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
+ /* Requires clock name bindings. */
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+ /* Requires clock name and DMA bindings. */
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+ "ux500-msp-i2s.0", &msp0_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+ "ux500-msp-i2s.1", &msp1_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+ "ux500-msp-i2s.2", &msp2_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+ "ux500-msp-i2s.3", &msp3_platform_data),
+ {},
+ };
+
+ static const struct of_device_id u8500_local_bus_nodes[] = {
+ /* only create devices below soc node */
+ { .compatible = "stericsson,db8500", },
+ { .compatible = "stericsson,db8500-prcmu", },
+ { .compatible = "simple-bus"},
+ { },
+ };
+
+ static void __init u8500_init_machine(void)
+ {
+ struct device *parent = NULL;
+
+ /* Pinmaps must be in place before devices register */
+ if (of_machine_is_compatible("st-ericsson,mop500"))
+ mop500_pinmaps_init();
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ snowball_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ hrefv60_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
+ /* TODO: Add pinmaps for ccu9540 board. */
+
+ /* TODO: Export SoC, USB, cpu-freq and DMA40 */
+ parent = u8500_of_init_devices();
+
+ /* automatically probe child nodes of db8500 device */
+ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+ }
+
+ static const char * stericsson_dt_platform_compat[] = {
+ "st-ericsson,u8500",
+ "st-ericsson,u8540",
+ "st-ericsson,u9500",
+ "st-ericsson,u9540",
+ NULL,
+ };
+
+ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = u8500_init_machine,
+ .init_late = NULL,
+ .dt_compat = stericsson_dt_platform_compat,
+ MACHINE_END
+
+ #endif
struct platform_device s3c_device_i2c0 = {
.name = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
.id = 0,
-#else
- .id = -1,
-#endif
.num_resources = ARRAY_SIZE(s3c_i2c0_resource),
.resource = s3c_i2c0_resource,
};
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
#endif /* CONFIG_S5P_DEV_MFC */
/* MIPI CSIS */
extern struct platform_device exynos4_device_ac97;
extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_dwmci;
extern struct platform_device exynos4_device_i2s0;
extern struct platform_device exynos4_device_i2s1;
extern struct platform_device exynos4_device_i2s2;
extern struct platform_device exynos4_device_pcm2;
extern struct platform_device exynos4_device_spdif;
- extern struct platform_device exynos_device_drm;
-
extern struct platform_device samsung_asoc_dma;
extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
+obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o
+ obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
+obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
def_bool y
depends on OF
+config GPIO_ACPI
+ def_bool y
+ depends on ACPI
+
config DEBUG_GPIO
bool "Debug GPIO calls"
depends on DEBUG_KERNEL
help
Say yes here to enable the GPIO driver for the DA9052 chip.
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
config GPIO_MAX730X
tristate
comment "Memory mapped GPIO drivers:"
+config GPIO_CLPS711X
+ def_bool y
+ depends on ARCH_CLPS711X
+
config GPIO_GENERIC_PLATFORM
tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
select GPIO_GENERIC
config GPIO_MVEBU
def_bool y
- depends on ARCH_MVEBU
+ depends on PLAT_ORION
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
- depends on ARM_AMBA
+ depends on ARM && ARM_AMBA
select GENERIC_IRQ_CHIP
help
Say yes here to support the PrimeCell PL061 GPIO device
help
Say yes here to support the PXA GPIO device
+config GPIO_SPEAR_SPICS
+ bool "ST SPEAr13xx SPI Chip Select as GPIO support"
+ depends on PLAT_SPEAR
+ select GENERIC_IRQ_CHIP
+ help
+ Say yes here to support ST SPEAr SPI Chip Select as GPIO device
+
config GPIO_STA2X11
bool "STA2x11/ConneXt GPIO support"
depends on MFD_STA2X11
Say yes here to support the STA2x11/ConneXt GPIO device.
The GPIO module has 128 GPIO pins with alternate functions.
+config GPIO_TS5500
+ tristate "TS-5500 DIO blocks and compatibles"
+ help
+ This driver supports Digital I/O exposed by pin blocks found on some
+ Technologic Systems platforms. It includes, but is not limited to, 3
+ blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
+ LCD port.
+
config GPIO_VT8500
bool "VIA/Wondermedia SoC GPIO Support"
depends on ARCH_VT8500
config GPIO_ADNP
tristate "Avionic Design N-bit GPIO expander"
- depends on I2C && OF
+ depends on I2C && OF_GPIO
help
This option enables support for N GPIOs found on Avionic Design
I2C GPIO expanders. The register space will be extended by powers
#include <linux/mbus.h>
#include <linux/clk.h>
#include <linux/platform_data/usb-ehci-orion.h>
+ #include <linux/of.h>
+ #include <linux/of_device.h>
+ #include <linux/of_irq.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
wrl(USB_MODE, 0x13);
}
-static int ehci_orion_setup(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval;
-
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
-}
-
static const struct hc_driver ehci_orion_hc_driver = {
.description = hcd_name,
.product_desc = "Marvell Orion EHCI",
/*
* basic lifecycle operations
*/
- .reset = ehci_orion_setup,
+ .reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-static void __devinit
+static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
const struct mbus_dram_target_info *dram)
{
}
}
-static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
+ static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
+
+static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
const struct mbus_dram_target_info *dram;
struct clk *clk;
void __iomem *regs;
int irq, err;
+ enum orion_ehci_phy_ver phy_version;
if (usb_disabled())
return -ENODEV;
pr_debug("Initializing Orion-SoC USB Host Controller\n");
- irq = platform_get_irq(pdev, 0);
+ if (pdev->dev.of_node)
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ else
+ irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
goto err1;
}
+ /*
+ * Right now device-tree probed devices don't get dma_mask
+ * set. Since shared usb code relies on it, set it here for
+ * now. Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &ehci_orion_dma_mask;
+
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
/*
* setup Orion USB controller.
*/
- switch (pd->phy_version) {
+ if (pdev->dev.of_node)
+ phy_version = EHCI_PHY_NA;
+ else
+ phy_version = pd->phy_version;
+
+ switch (phy_version) {
case EHCI_PHY_NA: /* dont change USB phy settings */
break;
case EHCI_PHY_ORION:
MODULE_ALIAS("platform:orion-ehci");
+ static const struct of_device_id ehci_orion_dt_ids[] __devinitdata = {
+ { .compatible = "marvell,orion-ehci", },
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
+
static struct platform_driver ehci_orion_driver = {
.probe = ehci_orion_drv_probe,
.remove = __exit_p(ehci_orion_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- .driver.name = "orion-ehci",
+ .driver = {
+ .name = "orion-ehci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ehci_orion_dt_ids),
+ },
};
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff