Convert CONFIG_LPUART et al to Kconfig

This converts the following to Kconfig:
   CONFIG_LPUART
   CONFIG_LPUART_32B_REG

And note that CONFIG_LPUART_32B_REG is unused in code.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index aedc12a..7766f12 100644 (file)
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -20,7 +20,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
@@ -88,6 +87,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y

diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index 56e00a7..43f93f4 100644 (file)
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -20,7 +20,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
@@ -89,6 +88,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y

diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index 5bb3175..973b499 100644 (file)
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -20,7 +20,6 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
@@ -76,6 +75,7 @@ CONFIG_SYS_QE_FW_ADDR=0x60940000
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y

diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index 1d0e303..0f4a33c 100644 (file)
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -22,7 +22,6 @@ CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
@@ -90,6 +89,7 @@ CONFIG_DM_SCSI=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y

diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index d583573..105fc5a 100644 (file)
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
@@ -92,6 +91,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y

diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 282cb43..47636f1 100644 (file)
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -25,7 +25,6 @@ CONFIG_REMAKE_ELF=y
 CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
@@ -93,6 +92,7 @@ CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 345d188..610f806 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -647,6 +647,10 @@ config FSL_LPUART
          Select this to enable a Low Power UART for Freescale VF610 and
          QorIQ Layerscape devices.
 
+config LPUART
+       bool "Use the LPUART as console"
+       depends on FSL_LPUART
+
 config MVEBU_A3700_UART
        bool "UART support for Armada 3700"
        help

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 6a27111..773cc9b 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -268,9 +268,7 @@
 /*
  * Serial Port
  */
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#else
+#ifndef CONFIG_LPUART
 #define CONFIG_SYS_NS16550_SERIAL
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 03a4ce5..b607dd3 100644 (file)
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -165,9 +165,7 @@
 /*
  * Serial Port
  */
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#else
+#ifndef CONFIG_LPUART
 #define CONFIG_SYS_NS16550_SERIAL
 #ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1

diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 1b4d181..843cd59 100644 (file)
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -66,7 +66,6 @@
 
 /* LPUART */
 #ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
 #define CFG_LPUART_MUX_MASK    0xf0
 #define CFG_LPUART_EN          0xf0
 #endif

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index e9919cd..bc02ac5 100644 (file)
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -39,11 +39,6 @@
 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
 #endif
 
-/* LPUART */
-#ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
-#endif
-
 /* SATA */
 
 /* EEPROM */

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 2972e3b..ce68d3f 100644 (file)
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -54,7 +54,6 @@
 
 /* LPUART */
 #ifdef CONFIG_LPUART
-#define CONFIG_LPUART_32B_REG
 #define CFG_UART_MUX_MASK      0x6
 #define CFG_UART_MUX_SHIFT     1
 #define CFG_LPUART_EN          0x2