--- /dev/null
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+ system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+ carelessly the system would stop functioning, but with the right
+ steps, one can gate it and keep the system running. Consider this
+ simplified suspend example:
+
+ While the system is operational, you would see something like
+
+ 24MHz 32kHz
+ |
+ PLL1
+ \
+ \_ CPU Mux
+ |
+ [CPU]
+
+ When you are about to suspend, you switch the CPU Mux to the 32kHz
+ oscillator:
+
+ 24Mhz 32kHz
+ | |
+ PLL1 |
+ /
+ CPU Mux _/
+ |
+ [CPU]
+
+ Finally you can gate the main oscillator
+
+ 32kHz
+ |
+ |
+ /
+ CPU Mux _/
+ |
+ [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+ you can find it at
+
+ http://linux-sunxi.org/A10/CCM
+
+ The authoritative source for information at this time is the ccmu driver
+ released by Allwinner, you can find it at
+
+ https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu
};
Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock. A cell marked as "y" means
+hardware capabilities of that clock. A cell marked as "y" means
mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary. Empty cells are either
+callback is invalid or otherwise unnecessary. Empty cells are either
optional or must be evaluated on a case-by-case basis.
clock hardware characteristics
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
+- reg: Contains L3 register address range for each noc domain.
- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
Examples:
OMAP Timer bindings
Required properties:
-- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers.
+- compatible: Should be set to one of the below. Please note that
+ OMAP44xx devices have timer instances that are 100%
+ register compatible with OMAP3xxx devices as well as
+ newer timers that are not 100% register compatible.
+ So for OMAP44xx devices timer instances may use
+ different compatible strings.
+
+ ti,omap2420-timer (applicable to OMAP24xx devices)
+ ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
+ ti,omap4430-timer (applicable to OMAP44xx devices)
+ ti,omap5430-timer (applicable to OMAP543x devices)
+ ti,am335x-timer (applicable to AM335x devices)
+ ti,am335x-timer-1ms (applicable to AM335x devices)
+
- reg: Contains timer register address range (base address and
length).
- interrupts: Contains the interrupt information for the timer. The
Example:
timer12: timer@48304000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48304000 0x400>;
interrupts = <95>;
ti,hwmods = "timer12"
--- /dev/null
+SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
+
+Properties:
+ - name : should be 'sysreg';
+ - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
+ For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
+ - reg : offset and length of the register set.
NVIDIA Tegra Power Management Controller (PMC)
-Properties:
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
- name : Should be pmc
- compatible : Should contain "nvidia,tegra<chip>-pmc".
- reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pclk" (The Tegra clock of that name),
+ "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
The PMU is an external Power Management Unit, whose interrupt output
signal is fed into the PMC. This signal is optionally inverted, and then
fed into the ARM GIC. The PMC is not involved in the detection or
handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+ Valid values are 0, 1 and 2:
+ 0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+ 1 (LP1): CPU voltage off and DRAM in self-refresh
+ 2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+ is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+ Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+ The LP0 vector contains the warm boot code that is executed by AVP when
+ resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+ processor and always being the first boot processor when chip is power on
+ or resume from deep sleep mode. When the system is resumed from the deep
+ sleep mode, the warm boot code will restore some PLLs, clocks and then
+ bring up CPU0 for resuming the system.
Example:
+/ SoC dts including file
pmc@7000f400 {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 110>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <100>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <458>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+ ...
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+ ...
};
--- /dev/null
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+ clock@0xff000000 {
+ compatible = "adi,axi-clkgen";
+ #clock-cells = <0>;
+ reg = <0xff000000 0x1000>;
+ clocks = <&osc 1>;
+ };
--- /dev/null
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+ - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+ - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+ [Core Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ xxti 1
+ xusbxti 2
+ fin_pll 3
+ fout_apll 4
+ fout_mpll 5
+ fout_epll 6
+ fout_vpll 7
+ sclk_apll 8
+ sclk_mpll 9
+ sclk_epll 10
+ sclk_vpll 11
+ arm_clk 12
+ aclk200 13
+ aclk100 14
+ aclk160 15
+ aclk133 16
+ mout_mpll_user_t 17 Exynos4x12
+ mout_mpll_user_c 18 Exynos4x12
+ mout_core 19
+ mout_apll 20
+
+
+ [Clock Gate for Special Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ sclk_fimc0 128
+ sclk_fimc1 129
+ sclk_fimc2 130
+ sclk_fimc3 131
+ sclk_cam0 132
+ sclk_cam1 133
+ sclk_csis0 134
+ sclk_csis1 135
+ sclk_hdmi 136
+ sclk_mixer 137
+ sclk_dac 138
+ sclk_pixel 139
+ sclk_fimd0 140
+ sclk_mdnie0 141 Exynos4412
+ sclk_mdnie_pwm0 12 142 Exynos4412
+ sclk_mipi0 143
+ sclk_audio0 144
+ sclk_mmc0 145
+ sclk_mmc1 146
+ sclk_mmc2 147
+ sclk_mmc3 148
+ sclk_mmc4 149
+ sclk_sata 150 Exynos4210
+ sclk_uart0 151
+ sclk_uart1 152
+ sclk_uart2 153
+ sclk_uart3 154
+ sclk_uart4 155
+ sclk_audio1 156
+ sclk_audio2 157
+ sclk_spdif 158
+ sclk_spi0 159
+ sclk_spi1 160
+ sclk_spi2 161
+ sclk_slimbus 162
+ sclk_fimd1 163 Exynos4210
+ sclk_mipi1 164 Exynos4210
+ sclk_pcm1 165
+ sclk_pcm2 166
+ sclk_i2s1 167
+ sclk_i2s2 168
+ sclk_mipihsi 169 Exynos4412
+ sclk_mfc 170
+ sclk_pcm0 171
+ sclk_g3d 172
+ sclk_pwm_isp 173 Exynos4x12
+ sclk_spi0_isp 174 Exynos4x12
+ sclk_spi1_isp 175 Exynos4x12
+ sclk_uart_isp 176 Exynos4x12
+
+ [Peripheral Clock Gates]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ fimc0 256
+ fimc1 257
+ fimc2 258
+ fimc3 259
+ csis0 260
+ csis1 261
+ jpeg 262
+ smmu_fimc0 263
+ smmu_fimc1 264
+ smmu_fimc2 265
+ smmu_fimc3 266
+ smmu_jpeg 267
+ vp 268
+ mixer 269
+ tvenc 270 Exynos4210
+ hdmi 271
+ smmu_tv 272
+ mfc 273
+ smmu_mfcl 274
+ smmu_mfcr 275
+ g3d 276
+ g2d 277 Exynos4210
+ rotator 278 Exynos4210
+ mdma 279 Exynos4210
+ smmu_g2d 280 Exynos4210
+ smmu_rotator 281 Exynos4210
+ smmu_mdma 282 Exynos4210
+ fimd0 283
+ mie0 284
+ mdnie0 285 Exynos4412
+ dsim0 286
+ smmu_fimd0 287
+ fimd1 288 Exynos4210
+ mie1 289 Exynos4210
+ dsim1 290 Exynos4210
+ smmu_fimd1 291 Exynos4210
+ pdma0 292
+ pdma1 293
+ pcie_phy 294
+ sata_phy 295 Exynos4210
+ tsi 296
+ sdmmc0 297
+ sdmmc1 298
+ sdmmc2 299
+ sdmmc3 300
+ sdmmc4 301
+ sata 302 Exynos4210
+ sromc 303
+ usb_host 304
+ usb_device 305
+ pcie 306
+ onenand 307
+ nfcon 308
+ smmu_pcie 309
+ gps 310
+ smmu_gps 311
+ uart0 312
+ uart1 313
+ uart2 314
+ uart3 315
+ uart4 316
+ i2c0 317
+ i2c1 318
+ i2c2 319
+ i2c3 320
+ i2c4 321
+ i2c5 322
+ i2c6 323
+ i2c7 324
+ i2c_hdmi 325
+ tsadc 326
+ spi0 327
+ spi1 328
+ spi2 329
+ i2s1 330
+ i2s2 331
+ pcm0 332
+ i2s0 333
+ pcm1 334
+ pcm2 335
+ pwm 336
+ slimbus 337
+ spdif 338
+ ac97 339
+ modemif 340
+ chipid 341
+ sysreg 342
+ hdmi_cec 343
+ mct 344
+ wdt 345
+ rtc 346
+ keyif 347
+ audss 348
+ mipi_hsi 349 Exynos4210
+ mdma2 350 Exynos4210
+ pixelasyncm0 351
+ pixelasyncm1 352
+ fimc_lite0 353 Exynos4x12
+ fimc_lite1 354 Exynos4x12
+ ppmuispx 355 Exynos4x12
+ ppmuispmx 356 Exynos4x12
+ fimc_isp 357 Exynos4x12
+ fimc_drc 358 Exynos4x12
+ fimc_fd 359 Exynos4x12
+ mcuisp 360 Exynos4x12
+ gicisp 361 Exynos4x12
+ smmu_isp 362 Exynos4x12
+ smmu_drc 363 Exynos4x12
+ smmu_fd 364 Exynos4x12
+ smmu_lite0 365 Exynos4x12
+ smmu_lite1 366 Exynos4x12
+ mcuctl_isp 367 Exynos4x12
+ mpwm_isp 368 Exynos4x12
+ i2c0_isp 369 Exynos4x12
+ i2c1_isp 370 Exynos4x12
+ mtcadc_isp 371 Exynos4x12
+ pwm_isp 372 Exynos4x12
+ wdt_isp 373 Exynos4x12
+ uart_isp 374 Exynos4x12
+ asyncaxim 375 Exynos4x12
+ smmu_ispcx 376 Exynos4x12
+ spi0_isp 377 Exynos4x12
+ spi1_isp 378 Exynos4x12
+ pwm_isp_sclk 379 Exynos4x12
+ spi0_isp_sclk 380 Exynos4x12
+ spi1_isp_sclk 381 Exynos4x12
+ uart_isp_sclk 382 Exynos4x12
+
+ [Mux Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ mout_fimc0 384
+ mout_fimc1 385
+ mout_fimc2 386
+ mout_fimc3 387
+ mout_cam0 388
+ mout_cam1 389
+ mout_csis0 390
+ mout_csis1 391
+ mout_g3d0 392
+ mout_g3d1 393
+ mout_g3d 394
+ aclk400_mcuisp 395 Exynos4x12
+
+ [Div Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ div_isp0 450 Exynos4x12
+ div_isp1 451 Exynos4x12
+ div_mcuisp0 452 Exynos4x12
+ div_mcuisp1 453 Exynos4x12
+ div_aclk200 454 Exynos4x12
+ div_aclk400_mcuisp 455 Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
--- /dev/null
+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+ - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ fin_pll 1
+
+ [Clock Gate for Special Clocks]
+
+ Clock ID
+ ----------------------------
+
+ sclk_cam_bayer 128
+ sclk_cam0 129
+ sclk_cam1 130
+ sclk_gscl_wa 131
+ sclk_gscl_wb 132
+ sclk_fimd1 133
+ sclk_mipi1 134
+ sclk_dp 135
+ sclk_hdmi 136
+ sclk_pixel 137
+ sclk_audio0 138
+ sclk_mmc0 139
+ sclk_mmc1 140
+ sclk_mmc2 141
+ sclk_mmc3 142
+ sclk_sata 143
+ sclk_usb3 144
+ sclk_jpeg 145
+ sclk_uart0 146
+ sclk_uart1 147
+ sclk_uart2 148
+ sclk_uart3 149
+ sclk_pwm 150
+ sclk_audio1 151
+ sclk_audio2 152
+ sclk_spdif 153
+ sclk_spi0 154
+ sclk_spi1 155
+ sclk_spi2 156
+
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ gscl0 256
+ gscl1 257
+ gscl2 258
+ gscl3 259
+ gscl_wa 260
+ gscl_wb 261
+ smmu_gscl0 262
+ smmu_gscl1 263
+ smmu_gscl2 264
+ smmu_gscl3 265
+ mfc 266
+ smmu_mfcl 267
+ smmu_mfcr 268
+ rotator 269
+ jpeg 270
+ mdma1 271
+ smmu_rotator 272
+ smmu_jpeg 273
+ smmu_mdma1 274
+ pdma0 275
+ pdma1 276
+ sata 277
+ usbotg 278
+ mipi_hsi 279
+ sdmmc0 280
+ sdmmc1 281
+ sdmmc2 282
+ sdmmc3 283
+ sromc 284
+ usb2 285
+ usb3 286
+ sata_phyctrl 287
+ sata_phyi2c 288
+ uart0 289
+ uart1 290
+ uart2 291
+ uart3 292
+ uart4 293
+ i2c0 294
+ i2c1 295
+ i2c2 296
+ i2c3 297
+ i2c4 298
+ i2c5 299
+ i2c6 300
+ i2c7 301
+ i2c_hdmi 302
+ adc 303
+ spi0 304
+ spi1 305
+ spi2 306
+ i2s1 307
+ i2s2 308
+ pcm1 309
+ pcm2 310
+ pwm 311
+ spdif 312
+ ac97 313
+ hsi2c0 314
+ hsi2c1 315
+ hs12c2 316
+ hs12c3 317
+ chipid 318
+ sysreg 319
+ pmu 320
+ cmu_top 321
+ cmu_core 322
+ cmu_mem 323
+ tzpc0 324
+ tzpc1 325
+ tzpc2 326
+ tzpc3 327
+ tzpc4 328
+ tzpc5 329
+ tzpc6 330
+ tzpc7 331
+ tzpc8 332
+ tzpc9 333
+ hdmi_cec 334
+ mct 335
+ wdt 336
+ rtc 337
+ tmu 338
+ fimd1 339
+ mie1 340
+ dsim0 341
+ dp 342
+ mixer 343
+ hdmi 345
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
--- /dev/null
+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ xtal 1
+ arm_clk 2
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ spi_baud 16
+ pb0_250 17
+ pr0_250 18
+ pr1_250 19
+ b_250 20
+ b_125 21
+ b_200 22
+ sata 23
+ usb 24
+ gmac0 25
+ cs250 26
+ pb0_250_o 27
+ pr0_250_o 28
+ pr1_250_o 29
+ b_250_o 30
+ b_125_o 31
+ b_200_o 32
+ sata_o 33
+ usb_o 34
+ gmac0_o 35
+ cs250_o 36
+
+Example: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x10000>;
+ #clock-cells = <1>;
+ };
--- /dev/null
+NVIDIA Tegra114 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra114-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+ The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ this case, those clocks are assigned IDs above 160 in order to highlight
+ this issue. Implementations that interpret these clock IDs as bit values
+ within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ explicitly handle these special cases.
+
+ The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ above.
+
+ 0 unassigned
+ 1 unassigned
+ 2 unassigned
+ 3 unassigned
+ 4 rtc
+ 5 timer
+ 6 uarta
+ 7 unassigned (register bit affects uartb and vfir)
+ 8 unassigned
+ 9 sdmmc2
+ 10 unassigned (register bit affects spdif_in and spdif_out)
+ 11 i2s1
+ 12 i2c1
+ 13 ndflash
+ 14 sdmmc1
+ 15 sdmmc4
+ 16 unassigned
+ 17 pwm
+ 18 i2s2
+ 19 epp
+ 20 unassigned (register bit affects vi and vi_sensor)
+ 21 2d
+ 22 usbd
+ 23 isp
+ 24 3d
+ 25 unassigned
+ 26 disp2
+ 27 disp1
+ 28 host1x
+ 29 vcp
+ 30 i2s0
+ 31 unassigned
+
+ 32 unassigned
+ 33 unassigned
+ 34 apbdma
+ 35 unassigned
+ 36 kbc
+ 37 unassigned
+ 38 unassigned
+ 39 unassigned (register bit affects fuse and fuse_burn)
+ 40 kfuse
+ 41 sbc1
+ 42 nor
+ 43 unassigned
+ 44 sbc2
+ 45 unassigned
+ 46 sbc3
+ 47 i2c5
+ 48 dsia
+ 49 unassigned
+ 50 mipi
+ 51 hdmi
+ 52 csi
+ 53 unassigned
+ 54 i2c2
+ 55 uartc
+ 56 mipi-cal
+ 57 emc
+ 58 usb2
+ 59 usb3
+ 60 msenc
+ 61 vde
+ 62 bsea
+ 63 bsev
+
+ 64 unassigned
+ 65 uartd
+ 66 unassigned
+ 67 i2c3
+ 68 sbc4
+ 69 sdmmc3
+ 70 unassigned
+ 71 owr
+ 72 afi
+ 73 csite
+ 74 unassigned
+ 75 unassigned
+ 76 la
+ 77 trace
+ 78 soc_therm
+ 79 dtv
+ 80 ndspeed
+ 81 i2cslow
+ 82 dsib
+ 83 tsec
+ 84 unassigned
+ 85 unassigned
+ 86 unassigned
+ 87 unassigned
+ 88 unassigned
+ 89 xusb_host
+ 90 unassigned
+ 91 msenc
+ 92 csus
+ 93 unassigned
+ 94 unassigned
+ 95 unassigned (bit affects xusb_dev and xusb_dev_src)
+
+ 96 unassigned
+ 97 unassigned
+ 98 unassigned
+ 99 mselect
+ 100 tsensor
+ 101 i2s3
+ 102 i2s4
+ 103 i2c4
+ 104 sbc5
+ 105 sbc6
+ 106 d_audio
+ 107 apbif
+ 108 dam0
+ 109 dam1
+ 110 dam2
+ 111 hda2codec_2x
+ 112 unassigned
+ 113 audio0_2x
+ 114 audio1_2x
+ 115 audio2_2x
+ 116 audio3_2x
+ 117 audio4_2x
+ 118 spdif_2x
+ 119 actmon
+ 120 extern1
+ 121 extern2
+ 122 extern3
+ 123 unassigned
+ 124 unassigned
+ 125 hda
+ 126 unassigned
+ 127 se
+
+ 128 hda2hdmi
+ 129 unassigned
+ 130 unassigned
+ 131 unassigned
+ 132 unassigned
+ 133 unassigned
+ 134 unassigned
+ 135 unassigned
+ 136 unassigned
+ 137 unassigned
+ 138 unassigned
+ 139 unassigned
+ 140 unassigned
+ 141 unassigned
+ 142 unassigned
+ 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src,
+ xusb_host_src and xusb_ss_src)
+ 144 cilab
+ 145 cilcd
+ 146 cile
+ 147 dsialp
+ 148 dsiblp
+ 149 unassigned
+ 150 dds
+ 151 unassigned
+ 152 dp2
+ 153 amx
+ 154 adx
+ 155 unassigned (bit affects dfll_ref and dfll_soc)
+ 156 xusb_ss
+
+ 192 uartb
+ 193 vfir
+ 194 spdif_in
+ 195 spdif_out
+ 196 vi
+ 197 vi_sensor
+ 198 fuse
+ 199 fuse_burn
+ 200 clk_32k
+ 201 clk_m
+ 202 clk_m_div2
+ 203 clk_m_div4
+ 204 pll_ref
+ 205 pll_c
+ 206 pll_c_out1
+ 207 pll_c2
+ 208 pll_c3
+ 209 pll_m
+ 210 pll_m_out1
+ 211 pll_p
+ 212 pll_p_out1
+ 213 pll_p_out2
+ 214 pll_p_out3
+ 215 pll_p_out4
+ 216 pll_a
+ 217 pll_a_out0
+ 218 pll_d
+ 219 pll_d_out0
+ 220 pll_d2
+ 221 pll_d2_out0
+ 222 pll_u
+ 223 pll_u_480M
+ 224 pll_u_60M
+ 225 pll_u_48M
+ 226 pll_u_12M
+ 227 pll_x
+ 228 pll_x_out0
+ 229 pll_re_vco
+ 230 pll_re_out
+ 231 pll_e_out0
+ 232 spdif_in_sync
+ 233 i2s0_sync
+ 234 i2s1_sync
+ 235 i2s2_sync
+ 236 i2s3_sync
+ 237 i2s4_sync
+ 238 vimclk_sync
+ 239 audio0
+ 240 audio1
+ 241 audio2
+ 242 audio3
+ 243 audio4
+ 244 spdif
+ 245 clk_out_1
+ 246 clk_out_2
+ 247 clk_out_3
+ 248 blink
+ 252 xusb_host_src
+ 253 xusb_falcon_src
+ 254 xusb_fs_src
+ 255 xusb_ss_src
+ 256 xusb_dev_src
+ 257 xusb_dev
+ 258 xusb_hs_src
+ 259 sclk
+ 260 hclk
+ 261 pclk
+ 262 cclk_g
+ 263 cclk_lp
+ 264 dfll_ref
+ 265 dfll_soc
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra114-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car 58>; /* usb2 */
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
90 clk_d
91 unassigned
92 sus
- 93 cdev1
- 94 cdev2
+ 93 cdev2
+ 94 cdev1
95 unassigned
96 uart2
--- /dev/null
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "allwinner,sun4i-osc-clk" - for a gatable oscillator
+ "allwinner,sun4i-pll1-clk" - for the main PLL clock
+ "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+ "allwinner,sun4i-axi-clk" - for the AXI clock
+ "allwinner,sun4i-ahb-clk" - for the AHB clock
+ "allwinner,sun4i-apb0-clk" - for the APB0 clock
+ "allwinner,sun4i-apb1-clk" - for the APB1 clock
+ "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0.
+
+For example:
+
+osc24M: osc24M@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
Required properties:
- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt numbers of DMA channels.
+ If a channel is empty/reserved, 0 should be filled in place.
+- #dma-cells : Must be <1>. The number cell specifies the channel ID.
+- dma-channels : Number of channels supported by the DMA controller
+
+Optional properties:
+- interrupt-names : Name of DMA channel interrupts
Supported chips:
imx23, imx28.
Examples:
-dma-apbh@80004000 {
+
+dma_apbh: dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
};
-dma-apbx@80024000 {
+dma_apbx: dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+};
+
+DMA clients connected to the MXS DMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
};
imx23 and imx28.
- reg: Address and length of the register set for lcdif
- interrupts: Should contain lcdif interrupts
+- display : phandle to display node (see below for details)
-Optional properties:
-- panel-enable-gpios : Should specify the gpio for panel enable
+* display node
+
+Required properties:
+- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
+- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings : Refer to binding doc display-timing.txt for details.
Examples:
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
- panel-enable-gpios = <&gpio3 30 0>;
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <164>;
+ hback-porch = <89>;
+ hsync-len = <10>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
- "ti,omap2-gpio" for OMAP2 controllers
- "ti,omap3-gpio" for OMAP3 controllers
- "ti,omap4-gpio" for OMAP4 controllers
+- gpio-controller : Marks the device node as a GPIO controller.
- #gpio-cells : Should be two.
- first cell is the pin number
- second cell is used to specify optional parameters (unused)
-- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller: Mark the device node as an interrupt controller.
- #interrupt-cells : Should be 2.
-- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
gpio4: gpio4 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
- #gpio-cells = <2>;
gpio-controller;
- #interrupt-cells = <2>;
+ #gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
};
--- /dev/null
+* Samsung 2D Graphics Accelerator
+
+Required properties:
+ - compatible : value should be one among the following:
+ (a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC
+ (b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs
+ (c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC
+
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+
+ - interrupts : G2D interrupt number to the CPU.
+
+Example:
+ g2d@12800000 {
+ compatible = "samsung,s5pv210-g2d";
+ reg = <0x12800000 0x1000>;
+ interrupts = <0 89 0>;
+ status = "disabled";
+ };
Required properties:
- compatible: Should be "fsl,<chip>-i2c"
- reg: Should contain registers location and length
-- interrupts: Should contain ERROR and DMA interrupts
+- interrupts: Should contain ERROR interrupt number
- clock-frequency: Desired I2C bus clock frequency in Hz.
Only 100000Hz and 400000Hz modes are supported.
-- fsl,i2c-dma-channel: APBX DMA channel for the I2C
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and I2C DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Examples:
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
- interrupts = <111 68>;
+ interrupts = <111>;
clock-frequency = <100000>;
- fsl,i2c-dma-channel = <6>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
};
--- /dev/null
+NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra114-i2c"
+ "nvidia,tegra30-i2c"
+ "nvidia,tegra20-i2c"
+ "nvidia,tegra20-i2c-dvc"
+ Details of compatible are as follows:
+ nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
+ controller. This only support master mode of I2C communication. Register
+ interface/offset and interrupts handling are different than generic I2C
+ controller. Driver of DVC I2C controller is only compatible with
+ "nvidia,tegra20-i2c-dvc".
+ nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
+ master and slave mode of I2C communication. The i2c-tegra driver only
+ support master mode of I2C communication. Driver of I2C controller is
+ only compatible with "nvidia,tegra20-i2c".
+ nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
+ very much similar to Tegra20 I2C controller with additional feature:
+ Continue Transfer Support. This feature helps to implement M_NO_START
+ as per I2C core API transfer flags. Driver of I2C controller is
+ compatible with "nvidia,tegra30-i2c" to enable the continue transfer
+ support. This is also compatible with "nvidia,tegra20-i2c" without
+ continue transfer support.
+ nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
+ very much similar to Tegra30 I2C controller with some hardware
+ modification:
+ - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
+ fast-clk. Tegra114 has only one clock source called as div-clk and
+ hence clock mechanism is changed in I2C controller.
+ - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
+ default and there is no way to disable it. Tegra114 has this
+ interrupt disable by default and SW need to enable explicitly.
+ Due to above changes, Tegra114 I2C driver makes incompatible with
+ previous hardware driver. Hence, tegra114 I2C controller is compatible
+ with "nvidia,tegra114-i2c".
+- reg: Should contain I2C controller registers physical address and length.
+- interrupts: Should contain I2C controller interrupts.
+- address-cells: Address cells for I2C device address.
+- size-cells: Size of the I2C device address.
+- clocks: Clock ID as per
+ Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
+ for I2C controller.
+- clock-names: Name of the clock:
+ Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
+ Tegra114 I2C controller: "div-clk".
+
+Example:
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 12>, <&tegra_car 124>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
+ };
- samsung,mfc-l : Base address of the second memory bank used by MFC
for DMA contiguous memory allocation and its size.
+
+Optional properties:
+ - samsung,power-domain : power-domain property defined with a phandle
+ to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
Required properties:
- compatible: Should be "fsl,<chip>-mmc". The supported chips include
imx23 and imx28.
-- interrupts: Should contain ERROR and DMA interrupts
-- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- interrupts: Should contain ERROR interrupt number
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and SSP DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Examples:
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
reg = <0x80010000 2000>;
- interrupts = <96 82>;
- fsl,ssp-dma-channel = <0>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
bus-width = <8>;
};
- compatible : should be "fsl,<chip>-gpmi-nand"
- reg : should contain registers location and length for gpmi and bch.
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
- - interrupts : The first is the DMA interrupt number for GPMI.
- The second is the BCH interrupt number.
- - interrupt-names : The interrupt names "gpmi-dma", "bch";
- - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+ - interrupts : BCH interrupt number.
+ - interrupt-names : Should be "bch".
+ - dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and GPMI DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+ - dma-names: Must be "rx-tx".
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
#size-cells = <1>;
reg = <0x8000c000 2000>, <0x8000a000 2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <88>, <41>;
- interrupt-names = "gpmi-dma", "bch";
- fsl,gpmi-dma-channel = <4>;
+ interrupts = <41>;
+ interrupt-names = "bch";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
partition@0 {
...
0: Disable the internal pull-up
1: Enable the internal pull-up
+Note that when enabling the pull-up, the internal pad keeper gets disabled.
+Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
+will only disable the internal pad keeper.
+
Examples:
pinctrl@80018000 {
Required properties:
- compatible : "nvidia,tegra-audio-alc5632"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&alc5632>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
Required properties:
- compatible : "nvidia,tegra-audio-trimslice"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
- nvidia,audio-codec : The phandle of the WM8903 audio codec
compatible = "nvidia,tegra-audio-trimslice";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
Required properties:
- compatible : "nvidia,tegra-audio-wm8753"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
nvidia,i2s-controller = <&i2s1>;
nvidia,audio-codec = <&wm8753>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
Required properties:
- compatible : "nvidia,tegra-audio-wm9712"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
"Mic", "MIC1";
nvidia,ac97-controller = <&ac97>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
Required properties:
- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
- reg: Offset and length of the register set for the device
-- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
-- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+- interrupts: Should contain SSP ERROR interrupt
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and SSP DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Optional properties:
- clock-frequency : Input clock frequency to the SPI block in Hz.
#size-cells = <0>;
compatible = "fsl,imx28-spi";
reg = <0x80010000 0x2000>;
- interrupts = <96 82>;
- fsl,ssp-dma-channel = <0>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
};
--- /dev/null
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+ (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+ (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+ it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+ should be the order of the interrupts specified. The local timer interrupts
+ should be specified after the four global timer interrupts have been
+ specified.
+
+ 0: Global Timer Interrupt 0
+ 1: Global Timer Interrupt 1
+ 2: Global Timer Interrupt 2
+ 3: Global Timer Interrupt 3
+ 4: Local Timer Interrupt 0
+ 5: Local Timer Interrupt 1
+ 6: ..
+ 7: ..
+ i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+ interrupt generated by MCT and the remaining three global timer
+ interrupts are unused. Two local timer interrupts have been
+ specified.
+
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <0 42 0>, <0 48 0>;
+ };
+
+Example 2: In this example, the MCT global and local timer interrupts are
+ connected to two seperate interrupt controllers. Hence, an
+ interrupt-map is created to map the interrupts to the respective
+ interrupt controllers.
+
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
imx23 and imx28.
- reg : Address and length of the register set for the device
- interrupts : Should contain the auart interrupt numbers
-
-Optional properties:
-- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other
- is for TX. If you add this property, it also means that you
- will enable the DMA support for the auart.
- Note: due to the hardware bug in imx23(see errata : 2836),
- only the imx28 can enable the DMA support for the auart.
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and AUART DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: "rx" for RX channel, "tx" for TX channel.
Example:
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
- interrupts = <112 70 71>;
- fsl,auart-dma-channel = <8 9>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
};
Note: Each auart port should have an alias correctly numbered in "aliases"
--- /dev/null
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+ EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+
+Optional properties:
+ - samsung,vbus-gpio: if present, specifies the GPIO that
+ needs to be pulled up for the bus to be powered.
+
+Example:
+
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
+ };
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+ OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+
+Example:
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
+ };
represents PERIPHERAL.
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
Optional properties:
- ctrl-module : phandle of the control module this glue uses to write to
--- /dev/null
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+ "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+ "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+ "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
+ "samsung,s5pc100-fimd"; /* for S5PC100 SoC */
+ "samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+ "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+ "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+ parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+ order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+ format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+ "lcd_sys", in the same order as they were listed in the interrupts
+ property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- samsung,power-domain: a phandle to FIMD power domain node.
+
+Example:
+
+SoC specific DT entry:
+
+ fimd@11c00000 {
+ compatible = "samsung,exynos4210-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x11c00000 0x20000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <11 0>, <11 1>, <11 2>;
+ clocks = <&clock 140>, <&clock 283>;
+ clock-names = "sclk_fimd", "fimd";
+ samsung,power-domain = <&pd_lcd0>;
+ status = "disabled";
+ };
+
+Board specific DT entry:
+
+ fimd@11c00000 {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
enabled and the variable is automatically set to 2, otherwise
the strategy is disabled and the variable is set to 1.
+backup_only - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If set, disable the director function while the server is
+ in backup mode to avoid packet loops for DR/TUN methods.
+
conntrack - BOOLEAN
0 - disabled (default)
not 0 - enabled
F: drivers/base/firmware*.c
F: include/linux/firmware.h
+FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+M: Joshua Morris <josh.h.morris@us.ibm.com>
+M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
+S: Maintained
+F: drivers/block/rsxx/
+
FLOPPY DRIVER
M: Jiri Kosina <jkosina@suse.cz>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
F: arch/arm/*omap*/*clock*
OMAP POWER MANAGEMENT SUPPORT
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
OMAP GPIO DRIVER
M: Santosh Shilimkar <santosh.shilimkar@ti.com>
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-omap.c
F: drivers/power/
PNP SUPPORT
-M: Adam Belay <abelay@mit.edu>
+M: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
M: Bjorn Helgaas <bhelgaas@google.com>
S: Maintained
F: drivers/pnp/
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
-RAMSAM DRIVER (IBM RamSan 70/80 PCI SSD Flash Card)
-M: Joshua Morris <josh.h.morris@us.ibm.com>
-M: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
-S: Maintained
-F: drivers/block/rsxx/
-
RANDOM NUMBER DRIVER
M: Theodore Ts'o" <tytso@mit.edu>
S: Maintained
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
-M: Kevin Hilman <khilman@ti.com>
+M: Kevin Hilman <khilman@deeprootsystems.com>
L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
-L: linux-snps-arc@vger.kernel.org
S: Supported
F: arch/arc/
+F: Documentation/devicetree/bindings/arc/
+F: drivers/tty/serial/arc-uart.c
SYSV FILESYSTEM
M: Christoph Hellwig <hch@infradead.org>
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Unicycling Gorilla
# *DOCUMENTATION*
int i;
for_each_sg(sg, s, nents, i)
- sg->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+ s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
s->length, dir);
return nents;
*/
#define ELF_PLATFORM (NULL)
-#define SET_PERSONALITY(ex) \
- set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
-
#endif
*-------------------------------------------------------------*/
.macro SAVE_ALL_EXCEPTION marker
- st \marker, [sp, 8]
+ st \marker, [sp, 8] /* orig_r8 */
st r0, [sp, 4] /* orig_r0, needed only for sys calls */
/* Restore r9 used to code the early prologue */
#ifdef CONFIG_KGDB
-#include <asm/user.h>
+#include <asm/ptrace.h>
/* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
* register API yet */
};
#else
-static inline void kgdb_trap(struct pt_regs *regs, int param)
-{
-}
+#define kgdb_trap(regs, param)
#endif
#endif /* __ARC_KGDB_H__ */
#define orig_r8_IS_SCALL 0x0001
#define orig_r8_IS_SCALL_RESTARTED 0x0002
#define orig_r8_IS_BRKPT 0x0004
-#define orig_r8_IS_EXCPN 0x0004
+#define orig_r8_IS_EXCPN 0x0008
#define orig_r8_IS_IRQ1 0x0010
#define orig_r8_IS_IRQ2 0x0020
#include <linux/types.h>
int sys_clone_wrapper(int, int, int, int, int);
-int sys_fork_wrapper(void);
-int sys_vfork_wrapper(void);
int sys_cacheflush(uint32_t, uint32_t uint32_t);
int sys_arc_settls(void *);
int sys_arc_gettls(void);
*/
struct user_regs_struct {
- struct scratch {
+ struct {
long pad;
long bta, lp_start, lp_end, lp_count;
long status32, ret, blink, fp, gp;
long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
long sp;
} scratch;
- struct callee {
+ struct {
long pad;
long r25, r24, r23, r22, r21, r20;
long r19, r18, r17, r16, r15, r14, r13;
; using ERET won't work since next-PC has already committed
lr r12, [efa]
GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11
- st r12, [r11, THREAD_FAULT_ADDR]
+ st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address
; PRE Sys Call Ptrace hook
mov r0, sp ; pt_regs needed
;################### Special Sys Call Wrappers ##########################
-; TBD: call do_fork directly from here
-ARC_ENTRY sys_fork_wrapper
- SAVE_CALLEE_SAVED_USER
- bl @sys_fork
- DISCARD_CALLEE_SAVED_USER
-
- GET_CURR_THR_INFO_FLAGS r10
- btst r10, TIF_SYSCALL_TRACE
- bnz tracesys_exit
-
- b ret_from_system_call
-ARC_EXIT sys_fork_wrapper
-
-ARC_ENTRY sys_vfork_wrapper
- SAVE_CALLEE_SAVED_USER
- bl @sys_vfork
- DISCARD_CALLEE_SAVED_USER
-
- GET_CURR_THR_INFO_FLAGS r10
- btst r10, TIF_SYSCALL_TRACE
- bnz tracesys_exit
-
- b ret_from_system_call
-ARC_EXIT sys_vfork_wrapper
-
ARC_ENTRY sys_clone_wrapper
SAVE_CALLEE_SAVED_USER
bl @sys_clone
*/
#include <linux/kgdb.h>
+#include <linux/sched.h>
#include <asm/disasm.h>
#include <asm/cacheflush.h>
n += scnprintf(buf + n, len - n, "\n");
-#ifdef _ASM_GENERIC_UNISTD_H
n += scnprintf(buf + n, len - n,
- "OS ABI [v2]\t: asm-generic/{unistd,stat,fcntl}\n");
-#endif
+ "OS ABI [v3]\t: no-legacy-syscalls\n");
return buf;
}
#include <asm/syscalls.h>
#define sys_clone sys_clone_wrapper
-#define sys_fork sys_fork_wrapper
-#define sys_vfork sys_vfork_wrapper
#undef __SYSCALL
#define __SYSCALL(nr, call) [nr] = (call),
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
+ select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK_PREPARE
select MULTI_IRQ_HANDLER
select PINCTRL
select SPARSE_IRQ
+ select STMP_DEVICE
select USE_OF
help
Support for Freescale MXS-based family of processors
select HAVE_CLK
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
- select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select ARM_VIC
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V6
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
config ARCH_S5PC100
bool "Samsung S5PC100"
- select ARCH_USES_GETTIMEOFFSET
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_CLK
config HAVE_ARM_TWD
bool
depends on SMP
+ select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
bool "Use local timer interrupts"
depends on SMP
default y
- select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
+ select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !CLKSRC_EXYNOS_MCT)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
+ depends on ARCH_MXC
help
Choose UART port on which kernel low-level debug messages
should be output.
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
+ exynos4412-odroidx.dtb \
exynos4412-smdk4412.dtb \
+ exynos4412-origen.dtb \
+ exynos5250-arndale.dtb \
+ exynos5440-sd5v1.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+ omap3430-sdp.dtb \
omap3-beagle.dtb \
+ omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
+ omap3-igep0020.dtb \
+ omap3-igep0030.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
status = "okay";
};
- i2c1: i2c@44e0b000 {
+ i2c0: i2c@44e0b000 {
status = "okay";
clock-frequency = <400000>;
led@2 {
label = "beaglebone:green:heartbeat";
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio1 21 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
- gpios = <&gpio2 22 0>;
+ gpios = <&gpio1 22 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
- gpios = <&gpio2 23 0>;
+ gpios = <&gpio1 23 0>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
- gpios = <&gpio2 24 0>;
+ gpios = <&gpio1 24 0>;
default-state = "off";
};
};
status = "okay";
};
- i2c1: i2c@44e0b000 {
+ i2c0: i2c@44e0b000 {
status = "okay";
clock-frequency = <400000>;
};
};
- i2c2: i2c@4802a000 {
+ i2c1: i2c@4802a000 {
status = "okay";
clock-frequency = <100000>;
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
- row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
- &gpio2 26 0 /* Bank1, pin26 */
- &gpio2 27 0>; /* Bank1, pin27 */
+ row-gpios = <&gpio1 25 0 /* Bank1, pin25 */
+ &gpio1 26 0 /* Bank1, pin26 */
+ &gpio1 27 0>; /* Bank1, pin27 */
- col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
- &gpio2 22 0>; /* Bank1, pin22 */
+ col-gpios = <&gpio1 21 0 /* Bank1, pin21 */
+ &gpio1 22 0>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
switch@9 {
label = "volume-up";
linux,code = <115>;
- gpios = <&gpio1 2 1>;
+ gpios = <&gpio0 2 1>;
gpio-key,wakeup;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
- gpios = <&gpio1 3 1>;
+ gpios = <&gpio0 3 1>;
gpio-key,wakeup;
};
};
status = "okay";
};
- i2c1: i2c@44e0b000 {
+ i2c0: i2c@44e0b000 {
status = "okay";
clock-frequency = <400000>;
led@1 {
label = "evmsk:green:usr0";
- gpios = <&gpio2 4 0>;
+ gpios = <&gpio1 4 0>;
default-state = "off";
};
led@2 {
label = "evmsk:green:usr1";
- gpios = <&gpio2 5 0>;
+ gpios = <&gpio1 5 0>;
default-state = "off";
};
led@3 {
label = "evmsk:green:mmc0";
- gpios = <&gpio2 6 0>;
+ gpios = <&gpio1 6 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "evmsk:green:heartbeat";
- gpios = <&gpio2 7 0>;
+ gpios = <&gpio1 7 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
switch@1 {
label = "button0";
linux,code = <0x100>;
- gpios = <&gpio3 3 0>;
+ gpios = <&gpio2 3 0>;
};
switch@2 {
label = "button1";
linux,code = <0x101>;
- gpios = <&gpio3 2 0>;
+ gpios = <&gpio2 2 0>;
};
switch@3 {
label = "button2";
linux,code = <0x102>;
- gpios = <&gpio1 30 0>;
+ gpios = <&gpio0 30 0>;
gpio-key,wakeup;
};
switch@4 {
label = "button3";
linux,code = <0x103>;
- gpios = <&gpio3 5 0>;
+ gpios = <&gpio2 5 0>;
};
};
};
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
+ d_can0 = &dcan0;
+ d_can1 = &dcan1;
};
cpus {
reg = <0x48200000 0x1000>;
};
- gpio1: gpio@44e07000 {
+ gpio0: gpio@44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
gpio-controller;
interrupts = <96>;
};
- gpio2: gpio@4804c000 {
+ gpio1: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
interrupts = <98>;
};
- gpio3: gpio@481ac000 {
+ gpio2: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
interrupts = <32>;
};
- gpio4: gpio@481ae000 {
+ gpio3: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
status = "disabled";
};
- i2c1: i2c@44e0b000 {
+ i2c0: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- i2c2: i2c@4802a000 {
+ i2c1: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- i2c3: i2c@4819c000 {
+ i2c2: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
dcan0: d_can@481cc000 {
compatible = "bosch,d_can";
ti,hwmods = "d_can0";
- reg = <0x481cc000 0x2000>;
+ reg = <0x481cc000 0x2000
+ 0x44e10644 0x4>;
interrupts = <52>;
status = "disabled";
};
dcan1: d_can@481d0000 {
compatible = "bosch,d_can";
ti,hwmods = "d_can1";
- reg = <0x481d0000 0x2000>;
+ reg = <0x481d0000 0x2000
+ 0x44e10644 0x4>;
interrupts = <55>;
status = "disabled";
};
timer1: timer@44e31000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer-1ms";
reg = <0x44e31000 0x400>;
interrupts = <67>;
ti,hwmods = "timer1";
};
timer2: timer@48040000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer";
reg = <0x48040000 0x400>;
interrupts = <68>;
ti,hwmods = "timer2";
};
timer3: timer@48042000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer";
reg = <0x48042000 0x400>;
interrupts = <69>;
ti,hwmods = "timer3";
};
timer4: timer@48044000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer";
reg = <0x48044000 0x400>;
interrupts = <92>;
ti,hwmods = "timer4";
};
timer5: timer@48046000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer";
reg = <0x48046000 0x400>;
interrupts = <93>;
ti,hwmods = "timer5";
};
timer6: timer@48048000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer";
reg = <0x48048000 0x400>;
interrupts = <94>;
ti,hwmods = "timer6";
};
timer7: timer@4804a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,am335x-timer";
reg = <0x4804a000 0x400>;
interrupts = <95>;
ti,hwmods = "timer7";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x48030000 0x400>;
- interrupt = <65>;
+ interrupts = <65>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi0";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x481a0000 0x400>;
- interrupt = <125>;
+ interrupts = <125>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi1";
status = "disabled";
*/
/dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap34xx.dtsi"
/ {
model = "TI AM3517 EVM (AM3517/05)";
*/
/dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap34xx.dtsi"
/ {
model = "TeeJet Mt.Ventoux";
chosen {
};
+ pinctrl@11400000 {
+ /*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+ i2c2_bus: i2c2-bus {
+ samsung,pin-pud = <0>;
+ };
+ };
+
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- gpios = <&gpb3 0 2 3 0>,
- <&gpb3 1 2 3 0>;
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
};
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- gpios = <&gpb3 2 2 3 0>,
- <&gpb3 3 2 3 0>;
};
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- /*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
- gpios = <&gpa0 6 3 0 0>,
- <&gpa0 7 3 0 0>;
-
hdmiddc@50 {
compatible = "samsung,exynos5-hdmiddc";
reg = <0x50>;
i2c@12C90000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpa1 2 3 3 0>,
- <&gpa1 3 3 3 0>;
};
i2c@12CA0000 {
i2c@12CB0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpa2 2 3 3 0>,
- <&gpa2 3 3 3 0>;
};
i2c@12CC0000 {
i2c@12CD0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpb2 2 3 3 0>,
- <&gpb2 3 3 3 0>;
};
i2c@12CE0000 {
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
- gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
- <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
- <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
- <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
- <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
- samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
- wp-gpios = <&gpc2 1 0 0 3>;
- gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
- <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
- <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+ wp-gpios = <&gpc2 1 0>;
};
};
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ /* See board-specific dts files for pin setup */
slot@0 {
reg = <0>;
bus-width = <4>;
- /* See board-specific dts files for GPIOs */
};
};
};
spi_1: spi@12d30000 {
- gpios = <&gpa2 4 2 3 0>,
- <&gpa2 6 2 3 0>,
- <&gpa2 7 2 3 0>;
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
};
hdmi {
- hpd-gpio = <&gpx3 7 0xf 1 3>;
+ hpd-gpio = <&gpx3 7 0>;
};
gpio-keys {
power {
label = "Power";
- gpios = <&gpx1 3 0 0x10000 0>;
+ gpios = <&gpx1 3 1>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
reg = <0x10440000 0x1000>;
};
+ sys_reg: sysreg {
+ compatible = "samsung,exynos4-sysreg", "syscon";
+ reg = <0x10010000 0x400>;
+ };
+
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
+ clocks = <&clock 345>;
+ clock-names = "watchdog";
status = "disabled";
};
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
+ clocks = <&clock 346>;
+ clock-names = "rtc";
status = "disabled";
};
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
+ clocks = <&clock 347>;
+ clock-names = "keypad";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
+ clocks = <&clock 297>, <&clock 145>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
+ clocks = <&clock 298>, <&clock 146>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
+ clocks = <&clock 299>, <&clock 147>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
+ clocks = <&clock 300>, <&clock 148>;
+ clock-names = "hsmmc", "mmc_busclk.2";
+ status = "disabled";
+ };
+
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 312>, <&clock 151>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 313>, <&clock 152>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
+ clocks = <&clock 315>, <&clock 154>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
+ clocks = <&clock 317>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
+ clocks = <&clock 318>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
+ clocks = <&clock 319>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
+ clocks = <&clock 320>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
+ clocks = <&clock 321>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
+ clocks = <&clock 322>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
+ clocks = <&clock 323>;
+ clock-names = "i2c";
status = "disabled";
};
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 324>;
+ clock-names = "i2c";
status = "disabled";
};
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 327>, <&clock 159>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
status = "disabled";
};
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 328>, <&clock 160>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
status = "disabled";
};
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 329>, <&clock 161>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
status = "disabled";
};
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 292>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ clocks = <&clock 293>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 279>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
};
+
+ fimd: fimd@11c00000 {
+ compatible = "samsung,exynos4210-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x11c00000 0x20000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <11 0>, <11 1>, <11 2>;
+ clocks = <&clock 140>, <&clock 283>;
+ clock-names = "sclk_fimd", "fimd";
+ samsung,power-domain = <&pd_lcd0>;
+ status = "disabled";
+ };
};
status = "okay";
};
+ g2d@12800000 {
+ status = "okay";
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
linux,default-trigger = "heartbeat";
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
};
sdhci@12530000 {
- samsung,sdhci-bus-width = <4>;
- linux,mmc_cap_4_bit_data;
- samsung,sdhci-cd-internal;
- gpio-cd = <&gpk2 2 2 3 3>;
- gpios = <&gpk2 0 2 0 3>,
- <&gpk2 1 2 0 3>,
- <&gpk2 3 2 3 3>,
- <&gpk2 4 2 3 3>,
- <&gpk2 5 2 3 3>,
- <&gpk2 6 2 3 3>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ status = "okay";
+ };
+
+ g2d@12800000 {
+ status = "okay";
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
status = "okay";
};
status = "okay";
};
+ pinctrl@11000000 {
+ keypad_rows: keypad-rows {
+ samsung,pins = "gpx2-0", "gpx2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_cols: keypad-cols {
+ samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+ "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
keypad@100A0000 {
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
linux,keypad-no-autorepeat;
linux,keypad-wakeup;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_rows &keypad_cols>;
status = "okay";
- row-gpios = <&gpx2 0 3 3 0>,
- <&gpx2 1 3 3 0>;
-
- col-gpios = <&gpx1 0 3 0 0>,
- <&gpx1 1 3 0 0>,
- <&gpx1 2 3 0 0>,
- <&gpx1 3 3 0 0>,
- <&gpx1 4 3 0 0>,
- <&gpx1 5 3 0 0>,
- <&gpx1 6 3 0 0>,
- <&gpx1 7 3 0 0>;
-
key_1 {
keypad,row = <0>;
keypad,column = <3>;
#address-cells = <1>;
#size-cells = <0>;
samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- gpios = <&gpd1 0 2 3 0>,
- <&gpd1 1 2 3 0>;
+ samsung,i2c-max-bus-freq = <100000>;
status = "okay";
eeprom@50 {
};
spi_2: spi@13940000 {
- gpios = <&gpc1 1 5 3 0>,
- <&gpc1 3 5 3 0>,
- <&gpc1 4 5 3 0>;
status = "okay";
w25x80@0 {
spi-max-frequency = <1000000>;
controller-data {
- cs-gpio = <&gpc1 2 1 0 3>;
+ cs-gpio = <&gpc1 2 0>;
samsung,spi-feedback-delay = <0>;
};
};
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
};
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &gic 0 69 0>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 0 42 0>,
+ <0x5 0 &gic 0 48 0>;
+ };
+ };
+
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
reg = <0x100C0000 0x100>;
interrupts = <2 4>;
};
+
+ g2d@12800000 {
+ compatible = "samsung,s5pv210-g2d";
+ reg = <0x12800000 0x1000>;
+ interrupts = <0 89 0>;
+ status = "disabled";
+ };
};
gic:interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &combiner 12 5>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 1 12 0>,
+ <0x5 0 &gic 1 12 0>;
+ };
+ };
};
--- /dev/null
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-X board based on Exynos4412";
+ compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpc1 0 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2:mmc0";
+ gpios = <&gpc1 2 1>;
+ default-state = "on";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ mshc@12550000 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ regulator_p3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpa1 1 1>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Insignal Origen evaluation board based on Exynos4412";
+ compatible = "insignal,origen4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="console=ttySAC2,115200";
+ };
+
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 0>;
+ enable-active-high;
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+ };
+
+ mshc@12550000 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
+ fimd@11c00000 {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing {
+ clock-frequency = <50000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hfront-porch = <64>;
+ hback-porch = <16>;
+ hsync-len = <48>;
+ vback-porch = <64>;
+ vfront-porch = <16>;
+ vsync-len = <3>;
+ };
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+ <&gpx2 4 0>,
+ <&gpx2 5 0>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+ <&gpm3 6 0>,
+ <&gpm3 7 0>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDIOAP_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_PRE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD18_2M";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD10_MIPI";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD33_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD18_MIPI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_UOTG";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDIOPERI_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB02";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_USH";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDIOAP_MMC012_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDDIOPERI_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "DVDD25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD28_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD28_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDDA28_2M";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD28_TF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD33_A31";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD18_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD18_A31";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "GPS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "DVDD12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_m12";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd12_5m";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vddf28_emmc";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+ };
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
};
+ g2d@10800000 {
+ status = "okay";
+ };
+
+ g2d@10800000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
serial@13830000 {
status = "okay";
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
gic:interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>, <6 0>, <7 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &combiner 12 5>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 1 12 0>,
+ <0x5 0 &gic 1 12 0>,
+ <0x6 0 &gic 1 12 0>,
+ <0x7 0 &gic 1 12 0>;
+ };
+ };
};
<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
};
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4412-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
reg = <0x106E0000 0x1000>;
interrupts = <0 72 0>;
};
+
+ g2d@10800000 {
+ compatible = "samsung,exynos4212-g2d";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 89 0>;
+ status = "disabled";
+ };
};
--- /dev/null
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "Insignal Arndale evaluation board based on EXYNOS5250";
+ compatible = "insignal,arndale", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ codec@11000000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ };
+
+ i2c@12C60000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
+ <&gpd1 1 0>,
+ <&gpd1 2 0>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
+ <&gpx2 4 0>,
+ <&gpx2 5 0>;
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+ };
+ };
+ };
+
+ i2c@12C70000 {
+ status = "disabled";
+ };
+
+ i2c@12C80000 {
+ status = "disabled";
+ };
+
+ i2c@12C90000 {
+ status = "disabled";
+ };
+
+ i2c@12CA0000 {
+ status = "disabled";
+ };
+
+ i2c@12CB0000 {
+ status = "disabled";
+ };
+
+ i2c@12CC0000 {
+ status = "disabled";
+ };
+
+ i2c@12CD0000 {
+ status = "disabled";
+ };
+
+ i2c@121D0000 {
+ status = "disabled";
+ };
+
+ dwmmc_0: dwmmc0@12200000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ dwmmc_1: dwmmc1@12210000 {
+ status = "disabled";
+ };
+
+ dwmmc_2: dwmmc2@12220000 {
+ num-slots = <1>;
+ supports-highspeed;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+ };
+
+ dwmmc_3: dwmmc3@12230000 {
+ status = "disabled";
+ };
+
+ spi_0: spi@12d20000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ status = "disabled";
+ };
+
+ spi_2: spi@12d40000 {
+ status = "disabled";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ menu {
+ label = "SW-TACT2";
+ gpios = <&gpx1 4 1>;
+ linux,code = <139>;
+ gpio-key,wakeup;
+ };
+
+ home {
+ label = "SW-TACT3";
+ gpios = <&gpx1 5 1>;
+ linux,code = <102>;
+ gpio-key,wakeup;
+ };
+
+ up {
+ label = "SW-TACT4";
+ gpios = <&gpx1 6 1>;
+ linux,code = <103>;
+ gpio-key,wakeup;
+ };
+
+ down {
+ label = "SW-TACT5";
+ gpios = <&gpx1 7 1>;
+ linux,code = <108>;
+ gpio-key,wakeup;
+ };
+
+ back {
+ label = "SW-TACT6";
+ gpios = <&gpx2 0 1>;
+ linux,code = <158>;
+ gpio-key,wakeup;
+ };
+
+ wakeup {
+ label = "SW-TACT7";
+ gpios = <&gpx2 1 1>;
+ linux,code = <143>;
+ gpio-key,wakeup;
+ };
+ };
+
+ hdmi {
+ hpd-gpio = <&gpx3 7 2>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ };
+
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 1>;
+ enable-active-high;
+ };
+
+ reg_hdmi_en: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-en";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl@11400000 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy1: gpy1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy2: gpy2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy3: gpy3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy4: gpy4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy5: gpy5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy6: gpy6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpc4: gpc4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+ <26 0>, <26 1>, <27 0>, <27 1>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&combiner>;
+ #interrupt-cells = <2>;
+ interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+ <30 0>, <30 1>, <31 0>, <31 1>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c2_hs_bus: i2c2-hs-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c3_hs_bus: i2c3-hs-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpa2-0", "gpa2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpa2-2", "gpa2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ac97_bus: ac97-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+ "gpb1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpb1-0", "gpb1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpb1-3", "gpb1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpb2-2", "gpb2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_hs_bus: i2c0-hs-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ i2c1_hs_bus: i2c1-hs-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus8: sd2-bus-width8 {
+ samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_clk: sd3-clk {
+ samsung,pins = "gpc4-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pins = "gpc4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cd: sd3-cd {
+ samsung,pins = "gpc4-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus1: sd3-bus-width1 {
+ samsung,pins = "gpc4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpd0-0", "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@13400000 {
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph0: gph0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ cam_gpio_a: cam-gpio-a {
+ samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+ "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+ "gpe1-0", "gpe1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_gpio_b: cam-gpio-b {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_i2c2_bus: cam-i2c2-bus {
+ samsung,pins = "gpe0-6", "gpe1-0";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_spi1_bus: cam-spi1-bus {
+ samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_i2c1_bus: cam-i2c1-bus {
+ samsung,pins = "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_i2c0_bus: cam-i2c0-bus {
+ samsung,pins = "gpf0-0", "gpf0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_spi0_bus: cam-spi0-bus {
+ samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_bayrgb_bus: cam-bayrgb-bus {
+ samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+ "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+ "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+ "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+ "gpg2-0", "gpg2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ cam_port_a: cam-port-a {
+ samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+ "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+ "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@10d10000 {
+ gpv0: gpv0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv1: gpv1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv2: gpv2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv3: gpv3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv4: gpv4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ c2c_rxd: c2c-rxd {
+ samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+ "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+ "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+
+ c2c_txd: c2c-txd {
+ samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+ "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+ "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@03680000 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+};
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
- gpios = <&gpb3 0 2 3 0>,
- <&gpb3 1 2 3 0>;
eeprom@50 {
compatible = "samsung,s524ad0xd1";
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
- gpios = <&gpb3 2 2 3 0>,
- <&gpb3 3 2 3 0>;
eeprom@51 {
compatible = "samsung,s524ad0xd1";
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
- gpios = <&gpa0 6 3 3 0>,
- <&gpa0 7 3 3 0>;
hdmiddc@50 {
compatible = "samsung,exynos5-hdmiddc";
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
slot@0 {
reg = <0>;
bus-width = <8>;
- gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
- <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
- <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
- <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
- <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
};
};
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
slot@0 {
reg = <0>;
bus-width = <4>;
- samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
disable-wp;
- gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
- <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
- <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
- <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
- <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
};
};
};
spi_1: spi@12d30000 {
- gpios = <&gpa2 4 2 3 0>,
- <&gpa2 6 2 3 0>,
- <&gpa2 7 2 3 0>;
-
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <1000000>;
controller-data {
- cs-gpio = <&gpa2 5 1 0 3>;
+ cs-gpio = <&gpa2 5 0>;
samsung,spi-feedback-delay = <0>;
};
};
hdmi {
- hpd-gpio = <&gpx3 7 0xf 1 3>;
+ hpd-gpio = <&gpx3 7 0>;
};
codec@11000000 {
};
i2s0: i2s@03830000 {
- gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
- <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
- <&gpz 6 2 0 0>;
+ status = "okay";
};
i2s1: i2s@12D60000 {
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&wm8994>;
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+ dp-controller {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
+ };
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250";
+ pinctrl@11400000 {
+ sd3_clk: sd3-clk {
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pin-drv = <0>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 0 0x10000 0>;
+ gpios = <&gpx3 5 1>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
*/
dwmmc3@12230000 {
slot@0 {
- gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
- <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
- <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+ };
+ };
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
};
};
};
*/
/include/ "skeleton.dtsi"
+/include/ "exynos5250-pinctrl.dtsi"
/ {
compatible = "samsung,exynos5250";
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
+ pinctrl3 = &pinctrl_3;
+ };
+
+ pd_gsc: gsc-power-domain@0x10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ };
+
+ pd_mfc: mfc-power-domain@0x10044040 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044040 0x20>;
+ };
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
};
gic:interrupt-controller@10481000 {
- compatible = "arm,cortex-a9-gic";
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x10481000 0x1000>, <0x10482000 0x2000>;
+ reg = <0x10481000 0x1000>,
+ <0x10482000 0x1000>,
+ <0x10484000 0x2000>,
+ <0x10486000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
};
combiner:interrupt-controller@10440000 {
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock 1>, <&clock 335>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x1 0 &combiner 23 4>,
+ <0x2 0 &combiner 25 2>,
+ <0x3 0 &combiner 25 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
+
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 46 0>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+ };
+
+ pinctrl_1: pinctrl@13400000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x13400000 0x1000>;
+ interrupts = <0 45 0>;
+ };
+
+ pinctrl_2: pinctrl@10d10000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x10d10000 0x1000>;
+ interrupts = <0 50 0>;
+ };
+
+ pinctrl_3: pinctrl@03680000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x0368000 0x1000>;
+ interrupts = <0 47 0>;
+ };
+
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
+ clocks = <&clock 336>;
+ clock-names = "watchdog";
};
codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
+ samsung,power-domain = <&pd_mfc>;
};
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <0 43 0>, <0 44 0>;
+ clocks = <&clock 337>;
+ clock-names = "rtc";
};
tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 338>;
+ clock-names = "tmu_apbif";
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
+ clocks = <&clock 289>, <&clock 146>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 290>, <&clock 147>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 291>, <&clock 148>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 292>, <&clock 149>;
+ clock-names = "uart", "clk_uart_baud0";
};
sata@122F0000 {
compatible = "samsung,exynos5-sata-ahci";
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
+ clocks = <&clock 277>, <&clock 143>;
+ clock-names = "sata", "sclk_sata";
};
sata-phy@12170000 {
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 294>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
};
i2c_1: i2c@12C70000 {
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 295>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
};
i2c_2: i2c@12C80000 {
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 296>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
};
i2c_3: i2c@12C90000 {
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 297>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
};
i2c_4: i2c@12CA0000 {
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 298>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
};
i2c_5: i2c@12CB0000 {
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 299>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
};
i2c_6: i2c@12CC0000 {
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 300>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
};
i2c_7: i2c@12CD0000 {
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 301>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
};
i2c_8: i2c@12CE0000 {
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 302>;
+ clock-names = "i2c";
};
i2c@121D0000 {
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 288>;
+ clock-names = "i2c";
};
spi_0: spi@12d20000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 304>, <&clock 154>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
};
spi_1: spi@12d30000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 305>, <&clock 155>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
};
spi_2: spi@12d40000 {
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 306>, <&clock 156>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
};
dwmmc_0: dwmmc0@12200000 {
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 280>, <&clock 139>;
+ clock-names = "biu", "ciu";
};
dwmmc_1: dwmmc1@12210000 {
interrupts = <0 76 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 281>, <&clock 140>;
+ clock-names = "biu", "ciu";
};
dwmmc_2: dwmmc2@12220000 {
interrupts = <0 77 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 282>, <&clock 141>;
+ clock-names = "biu", "ciu";
};
dwmmc_3: dwmmc3@12230000 {
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 283>, <&clock 142>;
+ clock-names = "biu", "ciu";
};
i2s0: i2s@03830000 {
samsung,supports-rstclr;
samsung,supports-secdai;
samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
};
i2s1: i2s@12D60000 {
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
};
i2s2: i2s@12D70000 {
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ };
+
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
+ };
+
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
};
amba {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 275>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 276>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
+ clocks = <&clock 271>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
+ clocks = <&clock 271>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
};
- gpio-controllers {
- #address-cells = <1>;
- #size-cells = <1>;
- gpio-controller;
- ranges;
-
- gpa0: gpio-controller@11400000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpa1: gpio-controller@11400020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpa2: gpio-controller@11400040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb0: gpio-controller@11400060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb1: gpio-controller@11400080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb2: gpio-controller@114000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpb3: gpio-controller@114000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc0: gpio-controller@114000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc1: gpio-controller@11400100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc2: gpio-controller@11400120 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400120 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc3: gpio-controller@11400140 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400140 0x20>;
- #gpio-cells = <4>;
- };
-
- gpc4: gpio-controller@114002E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114002E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd0: gpio-controller@11400160 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400160 0x20>;
- #gpio-cells = <4>;
- };
-
- gpd1: gpio-controller@11400180 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400180 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy0: gpio-controller@114001A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy1: gpio-controller@114001C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy2: gpio-controller@114001E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x114001E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy3: gpio-controller@11400200 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400200 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy4: gpio-controller@11400220 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400220 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy5: gpio-controller@11400240 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400240 0x20>;
- #gpio-cells = <4>;
- };
-
- gpy6: gpio-controller@11400260 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400260 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx0: gpio-controller@11400C00 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C00 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx1: gpio-controller@11400C20 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C20 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx2: gpio-controller@11400C40 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C40 0x20>;
- #gpio-cells = <4>;
- };
-
- gpx3: gpio-controller@11400C60 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400C60 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe0: gpio-controller@13400000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpe1: gpio-controller@13400020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf0: gpio-controller@13400040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400040 0x20>;
- #gpio-cells = <4>;
- };
-
- gpf1: gpio-controller@13400060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpg0: gpio-controller@13400080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpg1: gpio-controller@134000A0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x134000A0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpg2: gpio-controller@134000C0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x134000C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gph0: gpio-controller@134000E0 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x134000E0 0x20>;
- #gpio-cells = <4>;
- };
-
- gph1: gpio-controller@13400100 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x13400100 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv0: gpio-controller@10D10000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10000 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv1: gpio-controller@10D10020 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10020 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv2: gpio-controller@10D10040 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10060 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv3: gpio-controller@10D10060 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D10080 0x20>;
- #gpio-cells = <4>;
- };
-
- gpv4: gpio-controller@10D10080 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x10D100C0 0x20>;
- #gpio-cells = <4>;
- };
-
- gpz: gpio-controller@03860000 {
- compatible = "samsung,exynos4-gpio";
- reg = <0x03860000 0x20>;
- #gpio-cells = <4>;
- };
- };
-
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 256>;
+ clock-names = "gscl";
};
gsc_1: gsc@0x13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 257>;
+ clock-names = "gscl";
};
gsc_2: gsc@0x13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 258>;
+ clock-names = "gscl";
};
gsc_3: gsc@0x13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 259>;
+ clock-names = "gscl";
};
hdmi {
compatible = "samsung,exynos5-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
+ clocks = <&clock 333>, <&clock 136>, <&clock 137>,
+ <&clock 333>, <&clock 333>;
+ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+ "sclk_hdmiphy", "hdmiphy";
};
mixer {
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
};
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x1000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dptx-phy {
+ reg = <0x10040720>;
+ samsung,enable-mask = <1>;
+ };
+ };
+
+ fimd {
+ compatible = "samsung,exynos5250-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x14400000 0x40000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <18 4>, <18 5>, <18 6>;
+ clocks = <&clock 133>, <&clock 339>;
+ clock-names = "sclk_fimd", "fimd";
+ };
};
--- /dev/null
+/*
+ * SAMSUNG SD5v1 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5440.dtsi"
+
+/ {
+ model = "SAMSUNG SD5v1 board based on EXYNOS5440";
+ compatible = "samsung,sd5v1", "samsung,exynos5440";
+
+ chosen {
+ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
+ };
+
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
+ };
+
+ gmac: ethernet@00230000 {
+ fixed_phy;
+ phy_addr = <1>;
+ };
+
+ spi {
+ status = "disabled";
+ };
+
+};
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
compatible = "samsung,ssdk5440", "samsung,exynos5440";
- memory {
- reg = <0x80000000 0x80000000>;
- };
-
chosen {
- bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
+ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200";
};
spi {
status = "disabled";
};
- i2c@F0000 {
- status = "disabled";
- };
-
- i2c@100000 {
- status = "disabled";
- };
-
- watchdog {
- status = "disabled";
- };
-
- rtc {
- status = "disabled";
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
};
};
interrupt-parent = <&gic>;
+ clock: clock-controller@0x160000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>;
+ reg = <0x2E1000 0x1000>,
+ <0x2E2000 0x1000>,
+ <0x2E4000 0x2000>,
+ <0x2E6000 0x2000>;
+ interrupts = <1 9 0xf04>;
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <3>;
};
};
- common {
- compatible = "samsung,exynos5440";
+ arm-pmu {
+ compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+ interrupts = <0 52 4>,
+ <0 53 4>,
+ <0 54 4>,
+ <0 55 4>;
+ };
+
+ timer {
+ compatible = "arm,cortex-a15-timer",
+ "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <50000000>;
+ };
+ cpufreq@160000 {
+ compatible = "samsung,exynos5440-cpufreq";
+ reg = <0x160000 0x1000>;
+ interrupts = <0 57 0>;
+ operating-points = <
+ /* KHz uV */
+ 1200000 1025000
+ 1000000 975000
+ 800000 925000
+ >;
};
serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
+ clocks = <&clock 21>, <&clock 21>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
+ clocks = <&clock 21>, <&clock 21>;
+ clock-names = "uart", "clk_uart_baud0";
};
spi {
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>, <&clock 16>;
+ clock-names = "spi", "spi_busclk0";
};
pinctrl {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
+ interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
+ <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
};
i2c@F0000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>;
+ clock-names = "i2c";
};
i2c@100000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>;
+ clock-names = "i2c";
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
+ clocks = <&clock 21>;
+ clock-names = "watchdog";
+ };
+
+ gmac: ethernet@00230000 {
+ compatible = "snps,dwmac-3.70a";
+ reg = <0x00230000 0x8000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 31 4>;
+ interrupt-names = "macirq";
+ phy-mode = "sgmii";
+ clocks = <&clock 25>;
+ clock-names = "stmmaceth";
};
amba {
interrupt-parent = <&gic>;
ranges;
- pdma0: pdma@121A0000 {
+ pdma0: pdma@00121000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <0 34 0>;
+ reg = <0x121000 0x1000>;
+ interrupts = <0 46 0>;
+ clocks = <&clock 8>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
- pdma1: pdma@121B0000 {
+ pdma1: pdma@00120000 {
compatible = "arm,pl330", "arm,primecell";
- reg = <0x121000 0x1000>;
- interrupts = <0 35 0>;
+ reg = <0x120000 0x1000>;
+ interrupts = <0 47 0>;
+ clocks = <&clock 8>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
+ clocks = <&clock 21>;
+ clock-names = "rtc";
};
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
- panel-enable-gpios = <&gpio1 18 0>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display>;
status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <15>;
+ hfront-porch = <8>;
+ vback-porch = <12>;
+ vfront-porch = <4>;
+ hsync-len = <1>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
};
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
+
+ reg_lcd_3v3: lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 18 0>;
+ enable-active-high;
+ };
};
backlight {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
bus-width = <4>;
+ broken-cd;
status = "okay";
};
reg = <0x80000000 0x2000>;
};
- dma-apbh@80004000 {
+ dma_apbh: dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
reg = <0x80004000 0x2000>;
+ interrupts = <0 14 20 0
+ 13 13 13 13>;
+ interrupt-names = "empty", "ssp0", "ssp1", "empty",
+ "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <8>;
clocks = <&clks 15>;
};
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 34>;
clock-names = "gpmi_io";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
reg = <0x80010000 0x2000>;
interrupts = <15 14>;
clocks = <&clks 33>;
+ dmas = <&dma_apbh 1>;
+ dma-names = "rx-tx";
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
};
digctl@8001c000 {
+ compatible = "fsl,imx23-digctl";
reg = <0x8001c000 2000>;
status = "disabled";
};
status = "disabled";
};
- dma-apbx@80024000 {
+ dma_apbx: dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
reg = <0x80024000 0x2000>;
+ interrupts = <7 5 9 26
+ 19 0 25 23
+ 60 58 9 0
+ 0 0 0 0>;
+ interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
+ "saif0", "empty", "auart0-rx", "auart0-tx",
+ "auart1-rx", "auart1-tx", "saif1", "empty",
+ "empty", "empty", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
clocks = <&clks 16>;
};
};
ocotp@8002c000 {
+ compatible = "fsl,ocotp";
reg = <0x8002c000 0x2000>;
status = "disabled";
};
reg = <0x80034000 0x2000>;
interrupts = <2 20>;
clocks = <&clks 33>;
+ dmas = <&dma_apbh 2>;
+ dma-names = "rx-tx";
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx23-clkctrl";
+ compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
saif0: saif@80042000 {
reg = <0x80042000 0x2000>;
+ dmas = <&dma_apbx 4>;
+ dma-names = "rx-tx";
status = "disabled";
};
saif1: saif@80046000 {
reg = <0x80046000 0x2000>;
+ dmas = <&dma_apbx 10>;
+ dma-names = "rx-tx";
status = "disabled";
};
audio-out@80048000 {
reg = <0x80048000 0x2000>;
+ dmas = <&dma_apbx 1>;
+ dma-names = "tx";
status = "disabled";
};
audio-in@8004c000 {
reg = <0x8004c000 0x2000>;
+ dmas = <&dma_apbx 0>;
+ dma-names = "rx";
status = "disabled";
};
spdif@80054000 {
reg = <0x80054000 2000>;
+ dmas = <&dma_apbx 2>;
+ dma-names = "tx";
status = "disabled";
};
i2c@80058000 {
reg = <0x80058000 0x2000>;
+ dmas = <&dma_apbx 3>;
+ dma-names = "rx-tx";
status = "disabled";
};
compatible = "fsl,imx23-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <28 29 30 31>;
+ clocks = <&clks 28>;
};
auart0: serial@8006c000 {
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
clocks = <&clks 32>;
+ dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+ dma-names = "rx", "tx";
status = "disabled";
};
reg = <0x8006e000 0x2000>;
interrupts = <59 60 58>;
clocks = <&clks 32>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&lcdif_16bit_pins_a
&lcdif_pins_apf28dev>;
+ display = <&display>;
status = "okay";
+
+ display: display {
+ bits-per-pixel = <16>;
+ bus-width = <16>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33000033>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <96>;
+ hfront-porch = <96>;
+ vback-porch = <20>;
+ vfront-porch = <21>;
+ hsync-len = <64>;
+ vsync-len = <4>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
};
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_apx4>;
+ display = <&display>;
status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hfront-porch = <40>;
+ vback-porch = <32>;
+ vfront-porch = <13>;
+ hsync-len = <48>;
+ vsync-len = <3>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
};
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
- 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ w1_gpio_pins: w1-gpio@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>; /* 0 will enable the keeper */
+ };
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_18bit_pins_cfa10049
&lcdif_pins_cfa10049>;
+ display = <&display>;
status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9216000>;
+ hactive = <320>;
+ vactive = <480>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ hsync-len = <15>;
+ vsync-len = <15>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
};
};
usbphy1: usbphy@8007e000 {
status = "okay";
};
+
+ lradc@80050000 {
+ status = "okay";
+ fsl,lradc-touchscreen-wires = <4>;
+ };
};
};
pwms = <&pwm 3 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+
+ };
+
+ onewire@0 {
+ compatible = "w1-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&w1_gpio_pins>;
+ status = "okay";
+ gpios = <&gpio1 21 0>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_evk>;
- panel-enable-gpios = <&gpio3 30 0>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display>;
status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <89>;
+ hfront-porch = <164>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ hsync-len = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
can0: can@80032000 {
gpio = <&gpio3 8 0>;
enable-active-high;
};
+
+ reg_lcd_3v3: lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 0>;
+ enable-active-high;
+ };
};
sound {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_m28>;
+ display = <&display>;
status = "okay";
+
+ display: display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <0>;
+ hfront-porch = <256>;
+ vback-porch = <0>;
+ vfront-porch = <45>;
+ hsync-len = <1>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
};
can0: can@80032000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
status = "okay";
};
hsadc@80002000 {
reg = <0x80002000 0x2000>;
interrupts = <13 87>;
+ dmas = <&dma_apbh 12>;
+ dma-names = "rx";
status = "disabled";
};
- dma-apbh@80004000 {
+ dma_apbh: dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
clocks = <&clks 25>;
};
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 50>;
clock-names = "gpmi_io";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
reg = <0x80010000 0x2000>;
interrupts = <96 82>;
clocks = <&clks 46>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
reg = <0x80012000 0x2000>;
interrupts = <97 83>;
clocks = <&clks 47>;
+ dmas = <&dma_apbh 1>;
+ dma-names = "rx-tx";
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
reg = <0x80014000 0x2000>;
interrupts = <98 84>;
clocks = <&clks 48>;
+ dmas = <&dma_apbh 2>;
+ dma-names = "rx-tx";
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
reg = <0x80016000 0x2000>;
interrupts = <99 85>;
clocks = <&clks 49>;
+ dmas = <&dma_apbh 3>;
+ dma-names = "rx-tx";
fsl,ssp-dma-channel = <3>;
status = "disabled";
};
};
digctl@8001c000 {
+ compatible = "fsl,imx28-digctl";
reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
status = "disabled";
};
- dma-apbx@80024000 {
+ dma_apbx: dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
clocks = <&clks 26>;
};
};
ocotp@8002c000 {
+ compatible = "fsl,ocotp";
reg = <0x8002c000 0x2000>;
status = "disabled";
};
reg = <0x80030000 0x2000>;
interrupts = <38 86>;
clocks = <&clks 55>;
+ dmas = <&dma_apbh 13>;
+ dma-names = "rx";
status = "disabled";
};
ranges;
clks: clkctrl@80040000 {
- compatible = "fsl,imx28-clkctrl";
+ compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
reg = <0x80042000 0x2000>;
interrupts = <59 80>;
clocks = <&clks 53>;
+ dmas = <&dma_apbx 4>;
+ dma-names = "rx-tx";
fsl,saif-dma-channel = <4>;
status = "disabled";
};
reg = <0x80046000 0x2000>;
interrupts = <58 81>;
clocks = <&clks 54>;
+ dmas = <&dma_apbx 5>;
+ dma-names = "rx-tx";
fsl,saif-dma-channel = <5>;
status = "disabled";
};
spdif@80054000 {
reg = <0x80054000 0x2000>;
interrupts = <45 66>;
+ dmas = <&dma_apbx 2>;
+ dma-names = "tx";
status = "disabled";
};
reg = <0x80058000 0x2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
fsl,i2c-dma-channel = <6>;
status = "disabled";
};
reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
clock-frequency = <100000>;
+ dmas = <&dma_apbx 7>;
+ dma-names = "rx-tx";
fsl,i2c-dma-channel = <7>;
status = "disabled";
};
compatible = "fsl,imx28-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <48 49 50 51>;
+ clocks = <&clks 26>;
};
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
fsl,auart-dma-channel = <8 9>;
clocks = <&clks 45>;
status = "disabled";
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
+ dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+ dma-names = "rx", "tx";
clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
+ dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+ dma-names = "rx", "tx";
clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
+ dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+ dma-names = "rx", "tx";
clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
+ dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+ dma-names = "rx", "tx";
clocks = <&clks 45>;
status = "disabled";
};
compatible = "fsl,imx28-fec";
reg = <0x800f0000 0x4000>;
interrupts = <101>;
- clocks = <&clks 57>, <&clks 57>;
- clock-names = "ipg", "ahb";
+ clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+ clock-names = "ipg", "ahb", "enet_out";
status = "disabled";
};
interrupt-parent = <&intc>;
ranges;
- dma-apbh@00110000 {
+ dma_apbh: dma-apbh@00110000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x00110000 0x2000>;
+ interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
clocks = <&clks 106>;
};
<&clks 150>, <&clks 149>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
fsl,gpmi-dma-channel = <0>;
status = "disabled";
};
};
};
+ pmu {
+ compatible = "arm,arm1136-pmu";
+ interrupts = <3>;
+ };
+
soc {
compatible = "ti,omap-infra";
mpu {
reg = <0x480FE000 0x1000>;
};
+ sdma: dma-controller@48056000 {
+ compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+ reg = <0x48056000 0x1000>;
+ interrupts = <12>,
+ <13>,
+ <14>,
+ <15>;
+ #dma-cells = <1>;
+ #dma-channels = <32>;
+ #dma-requests = <64>;
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap2-uart";
ti,hwmods = "uart1";
};
timer2: timer@4802a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x4802a000 0x400>;
interrupts = <38>;
ti,hwmods = "timer2";
};
timer3: timer@48078000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48078000 0x400>;
interrupts = <39>;
ti,hwmods = "timer3";
};
timer4: timer@4807a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x4807a000 0x400>;
interrupts = <40>;
ti,hwmods = "timer4";
};
timer5: timer@4807c000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x4807c000 0x400>;
interrupts = <41>;
ti,hwmods = "timer5";
};
timer6: timer@4807e000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x4807e000 0x400>;
interrupts = <42>;
ti,hwmods = "timer6";
};
timer7: timer@48080000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48080000 0x400>;
interrupts = <43>;
ti,hwmods = "timer7";
};
timer8: timer@48082000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48082000 0x400>;
interrupts = <44>;
ti,hwmods = "timer8";
};
timer9: timer@48084000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48084000 0x400>;
interrupts = <45>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48086000 0x400>;
interrupts = <46>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48088000 0x400>;
interrupts = <47>;
ti,hwmods = "timer11";
};
timer12: timer@4808a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x4808a000 0x400>;
interrupts = <48>;
ti,hwmods = "timer12";
reg = <0x80000000 0x4000000>; /* 64 MB */
};
};
+
+&gpmc {
+ ranges = <0 0 0x08000000 0x04000000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ linux,mtd-name= "intel,ge28f256l18b85";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x04000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <10>;
+ gpmc,cs-rd-off-ns = <160>;
+ gpmc,cs-wr-off-ns = <160>;
+ gpmc,adv-on-ns = <20>;
+ gpmc,adv-rd-off-ns = <50>;
+ gpmc,adv-wr-off-ns = <50>;
+ gpmc,oe-on-ns = <60>;
+ gpmc,oe-off-ns = <120>;
+ gpmc,we-on-ns = <60>;
+ gpmc,we-off-ns = <120>;
+ gpmc,rd-cycle-ns = <170>;
+ gpmc,wr-cycle-ns = <170>;
+ gpmc,access-ns = <150>;
+ gpmc,page-burst-access-ns = <10>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0 0x20000>;
+ };
+ partition@0x20000 {
+ label = "params";
+ reg = <0x20000 0x20000>;
+ };
+ partition@0x40000 {
+ label = "kernel";
+ reg = <0x40000 0x200000>;
+ };
+ partition@0x240000 {
+ label = "file-system";
+ reg = <0x240000 0x3dc0000>;
+ };
+ };
+};
pinctrl-single,function-mask = <0x3f>;
};
+ gpio1: gpio@48018000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x48018000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@4801a000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801a000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@4801c000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801c000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@4801e000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4801e000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpmc: gpmc@6800a000 {
+ compatible = "ti,omap2420-gpmc";
+ reg = <0x6800a000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
+ };
+
mcbsp1: mcbsp@48074000 {
compatible = "ti,omap2420-mcbsp";
reg = <0x48074000 0xff>;
<60>; /* RX interrupt */
interrupt-names = "tx", "rx";
ti,hwmods = "mcbsp1";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
};
mcbsp2: mcbsp@48076000 {
<63>; /* RX interrupt */
interrupt-names = "tx", "rx";
ti,hwmods = "mcbsp2";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
};
timer1: timer@48028000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
pinctrl-single,function-mask = <0x3f>;
};
+ gpio1: gpio@4900c000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4900c000 0x200>;
+ interrupts = <29>;
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@4900e000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x4900e000 0x200>;
+ interrupts = <30>;
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@49010000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x49010000 0x200>;
+ interrupts = <31>;
+ ti,hwmods = "gpio3";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@49012000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x49012000 0x200>;
+ interrupts = <32>;
+ ti,hwmods = "gpio4";
+ ti,gpio-always-on;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@480b6000 {
+ compatible = "ti,omap2-gpio";
+ reg = <0x480b6000 0x200>;
+ interrupts = <33>;
+ ti,hwmods = "gpio5";
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpmc: gpmc@6e000000 {
+ compatible = "ti,omap2430-gpmc";
+ reg = <0x6e000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
+ };
+
mcbsp1: mcbsp@48074000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x48074000 0xff>;
interrupt-names = "common", "tx", "rx", "rx_overflow";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
};
mcbsp2: mcbsp@48076000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
};
mcbsp3: mcbsp@4808c000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
};
mcbsp4: mcbsp@4808e000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
};
mcbsp5: mcbsp@48096000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
+ dmas = <&sdma 21>,
+ <&sdma 22>;
+ dma-names = "tx", "rx";
};
timer1: timer@49018000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
model = "TI OMAP3 BeagleBoard xM";
compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
leds {
compatible = "gpio-leds";
- pmu_stat {
- label = "beagleboard::pmu_stat";
- gpios = <&twl_gpio 19 0>; /* LEDB */
- };
heartbeat {
label = "beagleboard::usr0";
};
};
+ pwmleds {
+ compatible = "pwm-leds";
+
+ pmu_stat {
+ label = "beagleboard::pmu_stat";
+ pwms = <&twl_pwmled 1 7812500>;
+ max-brightness = <127>;
+ };
+ };
+
sound {
compatible = "ti,omap-twl4030";
ti,model = "omap3beagle";
*/
ti,pulldowns = <0x03a1c4>;
};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ mode = <3>;
+ power = <50>;
+};
*/
/dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap34xx.dtsi"
/ {
model = "TI OMAP3 BeagleBoard";
compatible = "ti,omap3-beagle", "ti,omap3";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
+ /* HS USB Port 2 RESET */
+ hsusb2_reset: hsusb2_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 19 0>; /* gpio_147 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb2_reset>;
+ vcc-supply = <&hsusb2_power>;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ >;
+
+ hsusbb2_pins: pinmux_hsusbb2_pins {
+ pinctrl-single,pins = <
+ 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
+ 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+ 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+ 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+ 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+ 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+ 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
+ 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
+ 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
+ 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
+ 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
+ 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+ >;
+ };
};
&i2c1 {
&mmc3 {
status = "disabled";
};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
--- /dev/null
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap34xx.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000";
+ compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "devkit8000::led1";
+ gpios = <&gpio6 26 0>; /* 186 -> LED1 */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "devkit8000::led2";
+ gpios = <&gpio6 3 0>; /* 163 -> LED2 */
+ default-state = "on";
+ linux,default-trigger = "none";
+ };
+
+ usr {
+ label = "devkit8000::led3";
+ gpios = <&gpio6 4 0>; /* 164 -> LED3 */
+ default-state = "on";
+ linux,default-trigger = "usr";
+ };
+
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "devkit8000";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ ti,audio-routing =
+ "Ext Spk", "PREDRIVEL",
+ "Ext Spk", "PREDRIVER",
+ "MAINMIC", "Main Mic",
+ "Main Mic", "Mic Bias 1";
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&wdt2 {
+ status = "disabled";
+};
+
+&mcbsp1 {
+ status = "disabled";
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&mcbsp4 {
+ status = "disabled";
+};
+
+&mcbsp5 {
+ status = "disabled";
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ nand-bus-width = <16>;
+
+ gpmc,sync-clk = <0>;
+ gpmc,cs-on = <0>;
+ gpmc,cs-rd-off = <44>;
+ gpmc,cs-wr-off = <44>;
+ gpmc,adv-on = <6>;
+ gpmc,adv-rd-off = <34>;
+ gpmc,adv-wr-off = <44>;
+ gpmc,we-off = <40>;
+ gpmc,oe-off = <54>;
+ gpmc,access = <64>;
+ gpmc,rd-cycle = <82>;
+ gpmc,wr-cycle = <82>;
+ gpmc,wr-access = <40>;
+ gpmc,wr-data-mux-bus = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "File System";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
*/
/dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap34xx.dtsi"
/ {
model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
compatible = "ti,omap3-evm", "ti,omap3";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
&twl_gpio {
ti,use-leds;
};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ mode = <3>;
+ power = <50>;
+};
--- /dev/null
+/*
+ * Device Tree Source for IGEP Technology devices
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap34xx.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "igep2";
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+};
+
+&omap3_pmx_core {
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */
+ 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */
+ 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */
+ 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */
+ 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */
+ 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */
+ 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */
+ 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */
+ 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */
+ 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */
+ 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */
+ 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */
+ 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
+ >;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+};
--- /dev/null
+/*
+ * Device Tree Source for IGEPv2 board
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "omap3-igep.dtsi"
+
+/ {
+ model = "IGEPv2";
+ compatible = "isee,omap3-igep0020", "ti,omap3";
+
+ leds {
+ compatible = "gpio-leds";
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio1 26 0>;
+ default-state = "on";
+ };
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&gpio1 27 0>;
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 28 0>;
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 1>;
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for IGEP COM Module
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "omap3-igep.dtsi"
+
+/ {
+ model = "IGEP COM Module";
+ compatible = "isee,omap3-igep0030", "ti,omap3";
+
+ leds {
+ compatible = "gpio-leds";
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&twl_gpio 13 1>;
+ default-state = "on";
+ };
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&twl_gpio 18 1>; /* LEDA */
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 1>; /* LEDB */
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 16 1>;
+ default-state = "off";
+ };
+ };
+};
*/
/dts-v1/;
-/include/ "omap3.dtsi"
+/include/ "omap34xx.dtsi"
/ {
- leds {
- compatible = "gpio-leds";
+ pwmleds {
+ compatible = "pwm-leds";
+
overo {
label = "overo:blue:COM";
- gpios = <&twl_gpio 19 0>;
- linux,default-trigger = "mmc0";
+ pwms = <&twl_pwmled 1 7812500>;
+ max-brightness = <127>;
};
};
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "overo";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
};
&i2c1 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
&twl_gpio {
ti,use-leds;
};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ mode = <3>;
+ power = <50>;
+};
};
};
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ ti,hwmods = "debugss";
+ };
+
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
reg = <0x48200000 0x1000>;
};
+ sdma: dma-controller@48056000 {
+ compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
+ reg = <0x48056000 0x1000>;
+ interrupts = <12>,
+ <13>,
+ <14>,
+ <15>;
+ #dma-cells = <1>;
+ #dma-channels = <32>;
+ #dma-requests = <96>;
+ };
+
omap3_pmx_core: pinmux@48002030 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x48002030 0x05cc>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ pinctrl-single,function-mask = <0x7f1f>;
};
- omap3_pmx_wkup: pinmux@0x48002a58 {
+ omap3_pmx_wkup: pinmux@0x48002a00 {
compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002a58 0x5c>;
+ reg = <0x48002a00 0x5c>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ pinctrl-single,function-mask = <0x7f1f>;
};
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
+ reg = <0x48310000 0x200>;
+ interrupts = <29>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@49050000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49050000 0x200>;
+ interrupts = <30>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@49052000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49052000 0x200>;
+ interrupts = <31>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@49054000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49054000 0x200>;
+ interrupts = <32>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@49056000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49056000 0x200>;
+ interrupts = <33>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@49058000 {
compatible = "ti,omap3-gpio";
+ reg = <0x49058000 0x200>;
+ interrupts = <34>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
uart1: serial@4806a000 {
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
};
mcspi2: spi@4809a000 {
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
};
mcspi3: spi@480b8000 {
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>,
+ <&sdma 16>,
+ <&sdma 23>,
+ <&sdma 24>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
};
mcspi4: spi@480ba000 {
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
};
mmc1: mmc@4809c000 {
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc1";
ti,dual-volt;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
};
mmc2: mmc@480b4000 {
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc2";
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
};
mmc3: mmc@480ad000 {
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc3";
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
};
wdt2: wdt@48314000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
};
mcbsp2: mcbsp@49022000 {
interrupt-names = "common", "tx", "rx", "sidetone";
ti,buffer-size = <1280>;
ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
};
mcbsp3: mcbsp@49024000 {
interrupt-names = "common", "tx", "rx", "sidetone";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
};
mcbsp4: mcbsp@49026000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
};
mcbsp5: mcbsp@48096000 {
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
+ dmas = <&sdma 21>,
+ <&sdma 22>;
+ dma-names = "tx", "rx";
};
timer1: timer@48318000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
};
timer2: timer@49032000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x49032000 0x400>;
interrupts = <38>;
ti,hwmods = "timer2";
};
timer3: timer@49034000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x49034000 0x400>;
interrupts = <39>;
ti,hwmods = "timer3";
};
timer4: timer@49036000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x49036000 0x400>;
interrupts = <40>;
ti,hwmods = "timer4";
};
timer5: timer@49038000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x49038000 0x400>;
interrupts = <41>;
ti,hwmods = "timer5";
};
timer6: timer@4903a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x4903a000 0x400>;
interrupts = <42>;
ti,hwmods = "timer6";
};
timer7: timer@4903c000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x4903c000 0x400>;
interrupts = <43>;
ti,hwmods = "timer7";
};
timer8: timer@4903e000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x4903e000 0x400>;
interrupts = <44>;
ti,hwmods = "timer8";
};
timer9: timer@49040000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x49040000 0x400>;
interrupts = <45>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48086000 0x400>;
interrupts = <46>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48088000 0x400>;
interrupts = <47>;
ti,hwmods = "timer11";
};
timer12: timer@48304000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48304000 0x400>;
interrupts = <95>;
ti,hwmods = "timer12";
ti,timer-alwon;
ti,timer-secure;
};
+
+ usbhstll: usbhstll@48062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x48062000 0x1000>;
+ interrupts = <78>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@48064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x48064000 0x400>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@48064400 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x48064400 0x400>;
+ interrupt-parent = <&intc>;
+ interrupts = <76>;
+ };
+
+ usbhsehci: ehci@48064800 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x48064800 0x400>;
+ interrupt-parent = <&intc>;
+ interrupts = <77>;
+ };
+ };
+
+ gpmc: gpmc@6e000000 {
+ compatible = "ti,omap3430-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x6e000000 0x02d0>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ usb_otg_hs: usb_otg_hs@480ab000 {
+ compatible = "ti,omap3-musb";
+ reg = <0x480ab000 0x1000>;
+ interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupt-names = "mc", "dma";
+ ti,hwmods = "usb_otg_hs";
+ usb-phy = <&usb2_phy>;
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap34xx.dtsi"
+
+/ {
+ model = "TI OMAP3430 SDP";
+ compatible = "ti,omap3430-sdp", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&gpmc {
+ ranges = <0 0 0x10000000 0x08000000>,
+ <1 0 0x28000000 0x08000000>,
+ <2 0 0x20000000 0x10000000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ linux,mtd-name= "intel,pf48f6000m0y1be";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ partition@0 {
+ label = "bootloader-nor";
+ reg = <0 0x40000>;
+ };
+ partition@0x40000 {
+ label = "params-nor";
+ reg = <0x40000 0x40000>;
+ };
+ partition@0x80000 {
+ label = "kernel-nor";
+ reg = <0x80000 0x200000>;
+ };
+ partition@0x280000 {
+ label = "filesystem-nor";
+ reg = <0x240000 0x7d80000>;
+ };
+ };
+
+ nand@1,0 {
+ linux,mtd-name= "micron,mt29f1g08abb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1 0 0x08000000>;
+ nand-bus-width = <8>;
+
+ ti,nand-ecc-opt = "sw";
+ gpmc,device-nand;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ partition@0 {
+ label = "xloader-nand";
+ reg = <0 0x80000>;
+ };
+ partition@0x80000 {
+ label = "bootloader-nand";
+ reg = <0x80000 0x140000>;
+ };
+ partition@0x1c0000 {
+ label = "params-nand";
+ reg = <0x1c0000 0xc0000>;
+ };
+ partition@0x280000 {
+ label = "kernel-nand";
+ reg = <0x280000 0x500000>;
+ };
+ partition@0x780000 {
+ label = "filesystem-nand";
+ reg = <0x780000 0x7880000>;
+ };
+ };
+
+ onenand@2,0 {
+ linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0 0x10000000>;
+
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <84>;
+ gpmc,cs-wr-off-ns = <72>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <18>;
+ gpmc,oe-on-ns = <30>;
+ gpmc,oe-off-ns = <84>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <42>;
+ gpmc,rd-cycle-ns = <108>;
+ gpmc,wr-cycle-ns = <96>;
+ gpmc,access-ns = <78>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+
+ partition@0 {
+ label = "xloader-onenand";
+ reg = <0 0x80000>;
+ };
+ partition@0x80000 {
+ label = "bootloader-onenand";
+ reg = <0x80000 0x40000>;
+ };
+ partition@0xc0000 {
+ label = "params-onenand";
+ reg = <0xc0000 0x20000>;
+ };
+ partition@0xe0000 {
+ label = "kernel-onenand";
+ reg = <0xe0000 0x200000>;
+ };
+ partition@0x2e0000 {
+ label = "filesystem-onenand";
+ reg = <0x2e0000 0xfd20000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap3.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ /* OMAP343x/OMAP35xx variants OPP1-5 */
+ operating-points = <
+ /* kHz uV */
+ 125000 975000
+ 250000 1075000
+ 500000 1200000
+ 550000 1270000
+ 600000 1350000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+};
serial3 = &uart4;
};
+ cpus {
+ /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+ cpu@0 {
+ operating-points = <
+ /* kHz uV */
+ 300000 975000
+ 600000 1075000
+ 800000 1200000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+
ocp {
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/include/ "omap4-panda.dts"
+/dts-v1/;
+
+/include/ "omap443x.dtsi"
+/include/ "omap4-panda-common.dtsi"
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
--- /dev/null
+/*
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "elpida_ecb240abacn.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "pandaboard::status1";
+ gpios = <&gpio1 7 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "pandaboard::status2";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "PandaBoard";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6040_pins
+ &mcpdm_pins
+ &mcbsp1_pins
+ &dss_hdmi_pins
+ &tpd12s015_pins
+ >;
+
+ twl6040_pins: pinmux_twl6040_pins {
+ pinctrl-single,pins = <
+ 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
+ 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+ >;
+ };
+
+ mcpdm_pins: pinmux_mcpdm_pins {
+ pinctrl-single,pins = <
+ 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
+ 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
+ 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
+ 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
+ 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
+ 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
+ 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
+ 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+ >;
+ };
+
+ dss_hdmi_pins: pinmux_dss_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+ 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+ 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+ 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in their EEPROM as EDID data.
+ * The EEPROM is connected as I2C slave device.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ ti,non-removable;
+ bus-width = <4>;
+};
+
+&emif1 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp2 {
+ status = "disabled";
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&dmic {
+ status = "disabled";
+};
+
+&twl_usb_comparator {
+ usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/include/ "omap4-panda.dts"
+/dts-v1/;
+
+/include/ "omap4460.dtsi"
+/include/ "omap4-panda-common.dtsi"
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
*/
/dts-v1/;
-/include/ "omap4.dtsi"
-/include/ "elpida_ecb240abacn.dtsi"
-
-/ {
- model = "TI OMAP4 PandaBoard";
- compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x40000000>; /* 1 GB */
- };
-
- leds {
- compatible = "gpio-leds";
- heartbeat {
- label = "pandaboard::status1";
- gpios = <&gpio1 7 0>;
- linux,default-trigger = "heartbeat";
- };
-
- mmc {
- label = "pandaboard::status2";
- gpios = <&gpio1 8 0>;
- linux,default-trigger = "mmc0";
- };
- };
-
- sound: sound {
- compatible = "ti,abe-twl6040";
- ti,model = "PandaBoard";
-
- ti,mclk-freq = <38400000>;
-
- ti,mcpdm = <&mcpdm>;
-
- ti,twl6040 = <&twl6040>;
-
- /* Audio routing */
- ti,audio-routing =
- "Headset Stereophone", "HSOL",
- "Headset Stereophone", "HSOR",
- "Ext Spk", "HFL",
- "Ext Spk", "HFR",
- "Line Out", "AUXL",
- "Line Out", "AUXR",
- "HSMIC", "Headset Mic",
- "Headset Mic", "Headset Mic Bias",
- "AFML", "Line In",
- "AFMR", "Line In";
- };
-};
-
-&omap4_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &twl6040_pins
- &mcpdm_pins
- &mcbsp1_pins
- &dss_hdmi_pins
- &tpd12s015_pins
- >;
-
- twl6040_pins: pinmux_twl6040_pins {
- pinctrl-single,pins = <
- 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
- 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
- >;
- };
-
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
- 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
- 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
- 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
- 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
- >;
- };
-
- mcbsp1_pins: pinmux_mcbsp1_pins {
- pinctrl-single,pins = <
- 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
- 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
- 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
- 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
- >;
- };
-
- dss_hdmi_pins: pinmux_dss_hdmi_pins {
- pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
- 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
- >;
- };
-
- tpd12s015_pins: pinmux_tpd12s015_pins {
- pinctrl-single,pins = <
- 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
- 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
- 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
- >;
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
-
- twl: twl@48 {
- reg = <0x48>;
- /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
- interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
- };
-
- twl6040: twl@4b {
- compatible = "ti,twl6040";
- reg = <0x4b>;
- /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
- interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
-
- vio-supply = <&v1v8>;
- v2v1-supply = <&v2v1>;
- enable-active-high;
- };
-};
-
-/include/ "twl6030.dtsi"
-
-&i2c2 {
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in their EEPROM as EDID data.
- * The EEPROM is connected as I2C slave device.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&i2c4 {
- clock-frequency = <400000>;
-};
-
-&mmc1 {
- vmmc-supply = <&vmmc>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&mmc4 {
- status = "disabled";
-};
-
-&mmc5 {
- ti,non-removable;
- bus-width = <4>;
-};
-
-&emif1 {
- cs1-used;
- device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
- cs1-used;
- device-handle = <&elpida_ECB240ABACN>;
-};
-
-&mcbsp2 {
- status = "disabled";
-};
-
-&mcbsp3 {
- status = "disabled";
-};
-
-&dmic {
- status = "disabled";
-};
-
-&twl_usb_comparator {
- usb-supply = <&vusb>;
-};
+/include/ "omap443x.dtsi"
+/include/ "omap4-panda-common.dtsi"
*/
/dts-v1/;
-/include/ "omap4.dtsi"
+/include/ "omap443x.dtsi"
/include/ "elpida_ecb240abacn.dtsi"
/ {
};
};
+ pwmleds {
+ compatible = "pwm-leds";
+ kpad {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ charging {
+ label = "omap4:green:chrg";
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&twl_pwm 1 7812500>;
+ brightness-levels = <
+ 0 10 20 30 40
+ 50 60 70 80 90
+ 100 110 120 127
+ >;
+ default-brightness-level = <13>;
+ };
+
sound {
compatible = "ti,abe-twl6040";
ti,model = "SDP4430";
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
>;
};
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
+ 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
clock-frequency = <400000>;
twl: twl@48 {
/include/ "twl6030.dtsi"
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
clock-frequency = <400000>;
};
&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
clock-frequency = <400000>;
/*
};
&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
clock-frequency = <400000>;
/*
&twl_usb_comparator {
usb-supply = <&vusb>;
};
+
+&usb_otg_hs {
+ interface-type = <1>;
+ mode = <3>;
+ power = <50>;
+};
*/
/dts-v1/;
-/include/ "omap4.dtsi"
+/include/ "omap443x.dtsi"
/ {
model = "Variscite OMAP4 SOM";
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+ reg = <0x44000000 0x1000>,
+ <0x44800000 0x2000>,
+ <0x45000000 0x1000>;
+ interrupts = <0 9 0x4>,
+ <0 10 0x4>;
counter32k: counter@4a304000 {
compatible = "ti,omap-counter32k";
pinctrl-single,function-mask = <0x7fff>;
};
+ sdma: dma-controller@4a056000 {
+ compatible = "ti,omap4430-sdma";
+ reg = <0x4a056000 0x1000>;
+ interrupts = <0 12 0x4>,
+ <0 13 0x4>,
+ <0 14 0x4>,
+ <0 15 0x4>;
+ #dma-cells = <1>;
+ #dma-channels = <32>;
+ #dma-requests = <127>;
+ };
+
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
reg = <0x4a310000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <0 20 0x4>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
};
uart1: serial@4806a000 {
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
};
mcspi2: spi@4809a000 {
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
};
mcspi3: spi@480b8000 {
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>, <&sdma 16>;
+ dma-names = "tx0", "rx0";
};
mcspi4: spi@480ba000 {
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
};
mmc1: mmc@4809c000 {
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
};
mmc2: mmc@480b4000 {
interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
};
mmc3: mmc@480ad000 {
interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
};
mmc4: mmc@480d1000 {
interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
+ dmas = <&sdma 57>, <&sdma 58>;
+ dma-names = "tx", "rx";
};
mmc5: mmc@480d5000 {
interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
+ dmas = <&sdma 59>, <&sdma 60>;
+ dma-names = "tx", "rx";
};
wdt2: wdt@4a314000 {
reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
ti,hwmods = "mcpdm";
+ dmas = <&sdma 65>,
+ <&sdma 66>;
+ dma-names = "up_link", "dn_link";
};
dmic: dmic@4012e000 {
reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
ti,hwmods = "dmic";
+ dmas = <&sdma 67>;
+ dma-names = "up_link";
};
mcbsp1: mcbsp@40122000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
};
mcbsp2: mcbsp@40124000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
};
mcbsp3: mcbsp@40126000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
};
mcbsp4: mcbsp@48096000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
+ dmas = <&sdma 31>,
+ <&sdma 32>;
+ dma-names = "tx", "rx";
};
keypad: keypad@4a31c000 {
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
+ usb2_phy: usb2phy@4a0ad080 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a0ad080 0x58>;
+ ctrl-module = <&omap_control_usb>;
+ };
};
timer1: timer@4a318000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
interrupts = <0 37 0x4>;
ti,hwmods = "timer1";
};
timer2: timer@48032000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48032000 0x80>;
interrupts = <0 38 0x4>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x48034000 0x80>;
interrupts = <0 39 0x4>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x48036000 0x80>;
interrupts = <0 40 0x4>;
ti,hwmods = "timer4";
};
timer5: timer@40138000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x40138000 0x80>,
<0x49038000 0x80>;
interrupts = <0 41 0x4>;
};
timer6: timer@4013a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x4013a000 0x80>,
<0x4903a000 0x80>;
interrupts = <0 42 0x4>;
};
timer7: timer@4013c000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x4013c000 0x80>,
<0x4903c000 0x80>;
interrupts = <0 43 0x4>;
};
timer8: timer@4013e000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x4013e000 0x80>,
<0x4903e000 0x80>;
interrupts = <0 44 0x4>;
};
timer9: timer@4803e000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap4430-timer";
reg = <0x48088000 0x80>;
interrupts = <0 47 0x4>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
+
+ usbhstll: usbhstll@4a062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x4a062000 0x1000>;
+ interrupts = <0 78 0x4>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 0x4>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 0x4>;
+ };
+ };
+
+ omap_control_usb: omap-control-usb@4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a00233c 0x4>;
+ reg-names = "control_dev_conf", "otghs_control";
+ ti,type = <1>;
+ };
+
+ usb_otg_hs: usb_otg_hs@4a0ab000 {
+ compatible = "ti,omap4-musb";
+ reg = <0x4a0ab000 0x7ff>;
+ interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupt-names = "mc", "dma";
+ ti,hwmods = "usb_otg_hs";
+ usb-phy = <&usb2_phy>;
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ ti,has-mailbox;
+ };
};
};
--- /dev/null
+/*
+ * Device Tree Source for OMAP443x SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "omap4.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ /* OMAP443x variants OPP50-OPPNT */
+ operating-points = <
+ /* kHz uV */
+ 300000 1025000
+ 600000 1200000
+ 800000 1313000
+ 1008000 1375000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/include/ "omap4.dtsi"
+
+/ {
+ cpus {
+ /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
+ cpu@0 {
+ operating-points = <
+ /* kHz uV */
+ 350000 975000
+ 700000 1075000
+ 920000 1200000
+ >;
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 54 0x4>,
+ <0 55 0x4>;
+ ti,hwmods = "debugss";
+ };
+};
memory {
device_type = "memory";
- reg = <0x80000000 0x80000000>; /* 2 GB */
+ reg = <0x80000000 0x7F000000>; /* 2032 MB */
};
vmmcsd_fixed: fixedregulator-mmcsd {
0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
>;
};
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
+ 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */
+ 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */
+ 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c4_pins: pinmux_i2c4_pins {
+ pinctrl-single,pins = <
+ 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */
+ 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */
+ >;
+ };
+
+ i2c5_pins: pinmux_i2c5_pins {
+ pinctrl-single,pins = <
+ 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */
+ 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */
+ >;
+ };
+
+ mcspi2_pins: pinmux_mcspi2_pins {
+ pinctrl-single,pins = <
+ 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */
+ 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */
+ 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/
+ 0xc2 0x0 /* MCSPI2_CS MODE0*/
+ >;
+ };
+
+ mcspi3_pins: pinmux_mcspi3_pins {
+ pinctrl-single,pins = <
+ 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
+ 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
+ 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
+ 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
+ >;
+ };
+
+ mcspi4_pins: pinmux_mcspi4_pins {
+ pinctrl-single,pins = <
+ 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */
+ 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */
+ 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */
+ 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */
+ >;
+ };
};
&mmc1 {
status = "disabled";
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <400000>;
+};
+
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
clock-frequency = <400000>;
/* Pressure Sensor */
};
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+};
+
&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+
clock-frequency = <400000>;
/* Temperature Sensor */
};
};
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+
+ clock-frequency = <400000>;
+};
+
&keypad {
keypad,num-rows = <8>;
keypad,num-columns = <8>;
cs1-used;
device-handle = <&samsung_K3PE0E000B>;
};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi4_pins>;
+};
/include/ "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
compatible = "ti,omap5";
interrupt-parent = <&gic>;
cpus {
cpu@0 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- /* 14th PPI IRQ, active low level-sensitive */
- interrupts = <1 14 0x308>;
- clock-frequency = <6144000>;
- };
};
cpu@1 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- /* 14th PPI IRQ, active low level-sensitive */
- interrupts = <1 14 0x308>;
- clock-frequency = <6144000>;
- };
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ /* PPI secure/nonsecure IRQ, active low level-sensitive */
+ interrupts = <1 13 0x308>,
+ <1 14 0x308>,
+ <1 11 0x308>,
+ <1 10 0x308>;
+ clock-frequency = <6144000>;
+ };
+
+ gic: interrupt-controller@48211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48211000 0x1000>,
+ <0x48212000 0x1000>,
+ <0x48214000 0x2000>,
+ <0x48216000 0x2000>;
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+ reg = <0x44000000 0x2000>,
+ <0x44800000 0x3000>,
+ <0x45000000 0x4000>;
+ interrupts = <0 9 0x4>,
+ <0 10 0x4>;
counter32k: counter@4ae04000 {
compatible = "ti,omap-counter32k";
pinctrl-single,function-mask = <0x7fff>;
};
- gic: interrupt-controller@48211000 {
- compatible = "arm,cortex-a15-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x48211000 0x1000>,
- <0x48212000 0x1000>;
+ sdma: dma-controller@4a056000 {
+ compatible = "ti,omap4430-sdma";
+ reg = <0x4a056000 0x1000>;
+ interrupts = <0 12 0x4>,
+ <0 13 0x4>,
+ <0 14 0x4>,
+ <0 15 0x4>;
+ #dma-cells = <1>;
+ #dma-channels = <32>;
+ #dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
reg = <0x4ae10000 0x200>;
interrupts = <0 29 0x4>;
ti,hwmods = "gpio1";
+ ti,gpio-always-on;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,omap4430-gpmc";
+ reg = <0x50000000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <0 20 0x4>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ ti,hwmods = "gpmc";
};
i2c1: i2c@48070000 {
ti,hwmods = "i2c5";
};
+ mcspi1: spi@48098000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x48098000 0x200>;
+ interrupts = <0 65 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi1";
+ ti,spi-num-cs = <4>;
+ dmas = <&sdma 35>,
+ <&sdma 36>,
+ <&sdma 37>,
+ <&sdma 38>,
+ <&sdma 39>,
+ <&sdma 40>,
+ <&sdma 41>,
+ <&sdma 42>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mcspi2: spi@4809a000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x4809a000 0x200>;
+ interrupts = <0 66 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi2";
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 43>,
+ <&sdma 44>,
+ <&sdma 45>,
+ <&sdma 46>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ };
+
+ mcspi3: spi@480b8000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x480b8000 0x200>;
+ interrupts = <0 91 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi3";
+ ti,spi-num-cs = <2>;
+ dmas = <&sdma 15>, <&sdma 16>;
+ dma-names = "tx0", "rx0";
+ };
+
+ mcspi4: spi@480ba000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x480ba000 0x200>;
+ interrupts = <0 48 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "mcspi4";
+ ti,spi-num-cs = <1>;
+ dmas = <&sdma 70>, <&sdma 71>;
+ dma-names = "tx0", "rx0";
+ };
+
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
+ dmas = <&sdma 61>, <&sdma 62>;
+ dma-names = "tx", "rx";
};
mmc2: mmc@480b4000 {
interrupts = <0 86 0x4>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
+ dmas = <&sdma 47>, <&sdma 48>;
+ dma-names = "tx", "rx";
};
mmc3: mmc@480ad000 {
interrupts = <0 94 0x4>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
+ dmas = <&sdma 77>, <&sdma 78>;
+ dma-names = "tx", "rx";
};
mmc4: mmc@480d1000 {
interrupts = <0 96 0x4>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
+ dmas = <&sdma 57>, <&sdma 58>;
+ dma-names = "tx", "rx";
};
mmc5: mmc@480d5000 {
interrupts = <0 59 0x4>;
ti,hwmods = "mmc5";
ti,needs-special-reset;
+ dmas = <&sdma 59>, <&sdma 60>;
+ dma-names = "tx", "rx";
};
keypad: keypad@4ae1c000 {
compatible = "ti,omap4-keypad";
+ reg = <0x4ae1c000 0x400>;
ti,hwmods = "kbd";
};
reg-names = "mpu", "dma";
interrupts = <0 112 0x4>;
ti,hwmods = "mcpdm";
+ dmas = <&sdma 65>,
+ <&sdma 66>;
+ dma-names = "up_link", "dn_link";
};
dmic: dmic@4012e000 {
reg-names = "mpu", "dma";
interrupts = <0 114 0x4>;
ti,hwmods = "dmic";
+ dmas = <&sdma 67>;
+ dma-names = "up_link";
};
mcbsp1: mcbsp@40122000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
+ dmas = <&sdma 33>,
+ <&sdma 34>;
+ dma-names = "tx", "rx";
};
mcbsp2: mcbsp@40124000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
+ dmas = <&sdma 17>,
+ <&sdma 18>;
+ dma-names = "tx", "rx";
};
mcbsp3: mcbsp@40126000 {
interrupt-names = "common";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
+ dmas = <&sdma 19>,
+ <&sdma 20>;
+ dma-names = "tx", "rx";
};
timer1: timer@4ae18000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
interrupts = <0 37 0x4>;
ti,hwmods = "timer1";
};
timer2: timer@48032000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
interrupts = <0 38 0x4>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
interrupts = <0 39 0x4>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
interrupts = <0 40 0x4>;
ti,hwmods = "timer4";
};
timer5: timer@40138000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x40138000 0x80>,
<0x49038000 0x80>;
interrupts = <0 41 0x4>;
};
timer6: timer@4013a000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x4013a000 0x80>,
<0x4903a000 0x80>;
interrupts = <0 42 0x4>;
};
timer7: timer@4013c000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x4013c000 0x80>,
<0x4903c000 0x80>;
interrupts = <0 43 0x4>;
};
timer8: timer@4013e000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x4013e000 0x80>,
<0x4903e000 0x80>;
interrupts = <0 44 0x4>;
};
timer9: timer@4803e000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
interrupts = <0 47 0x4>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
+ wdt2: wdt@4ae14000 {
+ compatible = "ti,omap5-wdt", "ti,omap3-wdt";
+ reg = <0x4ae14000 0x80>;
+ interrupts = <0 80 0x4>;
+ ti,hwmods = "wd_timer2";
+ };
+
emif1: emif@0x4c000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif1";
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ omap_control_usb: omap-control-usb@4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a002370 0x4>;
+ reg-names = "control_dev_conf", "phy_power_usb";
+ ti,type = <2>;
+ };
+
+ omap_dwc3@4a020000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss";
+ reg = <0x4a020000 0x1000>;
+ interrupts = <0 93 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ dwc3@4a030000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x4a030000 0x1000>;
+ interrupts = <0 92 4>;
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ tx-fifo-resize;
+ };
+ };
+
+ ocp2scp {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp1";
+ usb2_phy: usb2phy@4a084000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a084000 0x7c>;
+ ctrl-module = <&omap_control_usb>;
+ };
+
+ usb3_phy: usb3phy@4a084400 {
+ compatible = "ti,omap-usb3";
+ reg = <0x4a084400 0x80>,
+ <0x4a084800 0x64>,
+ <0x4a084c00 0x40>;
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_usb>;
+ };
+ };
};
};
reg = <0x80000000 0x40000000>;
};
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ clk1_out_pw4 {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ dap1_din_pn1 {
+ nvidia,pins = "dap1_din_pn1";
+ nvidia,function = "i2s0";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ dap1_dout_pn2 {
+ nvidia,pins = "dap1_dout_pn2",
+ "dap1_fs_pn0",
+ "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ dap2_din_pa4 {
+ nvidia,pins = "dap2_din_pa4";
+ nvidia,function = "i2s1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ dap2_dout_pa5 {
+ nvidia,pins = "dap2_dout_pa5",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3";
+ nvidia,function = "i2s1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ dap4_din_pp5 {
+ nvidia,pins = "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ dvfs_pwm_px0 {
+ nvidia,pins = "dvfs_pwm_px0",
+ "dvfs_clk_px2";
+ nvidia,function = "cldvfs";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "ulpi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ ulpi_dir_py1 {
+ nvidia,pins = "ulpi_dir_py1",
+ "ulpi_nxt_py2";
+ nvidia,function = "ulpi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ ulpi_stp_py3 {
+ nvidia,pins = "ulpi_stp_py3";
+ nvidia,function = "ulpi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,open-drain = <0>;
+ };
+ cam_mclk_pcc0 {
+ nvidia,pins = "cam_mclk_pcc0",
+ "pbb0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ nvidia,lock = <0>;
+ };
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,open-drain = <0>;
+ };
+ gmi_a16_pj7 {
+ nvidia,pins = "gmi_a16_pj7";
+ nvidia,function = "uartd";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gmi_a17_pb0 {
+ nvidia,pins = "gmi_a17_pb0",
+ "gmi_a18_pb1";
+ nvidia,function = "uartd";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ gmi_a19_pk7 {
+ nvidia,pins = "gmi_a19_pk7";
+ nvidia,function = "uartd";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gmi_ad5_pg5 {
+ nvidia,pins = "gmi_ad5_pg5",
+ "gmi_cs6_n_pi3",
+ "gmi_wr_n_pi0";
+ nvidia,function = "spi4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gmi_ad6_pg6 {
+ nvidia,pins = "gmi_ad6_pg6",
+ "gmi_ad7_pg7";
+ nvidia,function = "spi4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gmi_ad12_ph4 {
+ nvidia,pins = "gmi_ad12_ph4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gmi_ad9_ph1 {
+ nvidia,pins = "gmi_ad9_ph1";
+ nvidia,function = "pwm1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gmi_cs1_n_pj2 {
+ nvidia,pins = "gmi_cs1_n_pj2",
+ "gmi_oe_n_pi1";
+ nvidia,function = "soc";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ clk2_out_pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ sdmmc1_wp_n_pv3 {
+ nvidia,pins = "sdmmc1_wp_n_pv3";
+ nvidia,function = "spi4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "kb_col4_pq4",
+ "sdmmc3_clk_lb_out_pee4",
+ "sdmmc3_clk_lb_in_pee5";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ sdmmc4_cmd_pt7 {
+ nvidia,pins = "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ clk_32k_out_pa0 {
+ nvidia,pins = "clk_32k_out_pa0";
+ nvidia,function = "blink";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ kb_col0_pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col2_pq2",
+ "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2";
+ nvidia,function = "kbc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ dap3_din_pp1 {
+ nvidia,pins = "dap3_din_pp1",
+ "dap3_sclk_pp3";
+ nvidia,function = "displayb";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <0>;
+ };
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <0>;
+ };
+ kb_row7_pr7 {
+ nvidia,pins = "kb_row7_pr7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ kb_row10_ps2 {
+ nvidia,pins = "kb_row10_ps2";
+ nvidia,function = "uarta";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ kb_row9_ps1 {
+ nvidia,pins = "kb_row9_ps1";
+ nvidia,function = "uarta";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,open-drain = <0>;
+ };
+ sys_clk_req_pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "sysclk";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ core_pwr_req {
+ nvidia,pins = "core_pwr_req";
+ nvidia,function = "pwron";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ cpu_pwr_req {
+ nvidia,pins = "cpu_pwr_req";
+ nvidia,function = "cpu";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ pwr_int_n {
+ nvidia,pins = "pwr_int_n";
+ nvidia,function = "pmi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ reset_out_n {
+ nvidia,pins = "reset_out_n";
+ nvidia,function = "reset_out_n";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ clk3_out_pee0 {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gen1_i2c_scl_pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,open-drain = <0>;
+ };
+ uart2_cts_n_pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ uart2_rts_n_pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3";
+ nvidia,function = "irda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ uart2_txd_pc2 {
+ nvidia,pins = "uart2_txd_pc2";
+ nvidia,function = "irda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "owr";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ hdmi_cec_pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,open-drain = <0>;
+ };
+ ddc_scl_pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,rcv-sel = <1>;
+ };
+ spdif_in_pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "usb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ };
+ usb_vbus_en0_pn4 {
+ nvidia,pins = "usb_vbus_en0_pn4";
+ nvidia,function = "usb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ nvidia,lock = <0>;
+ nvidia,open-drain = <1>;
+ };
+ gpio_x6_aud_px6 {
+ nvidia,pins = "gpio_x6_aud_px6";
+ nvidia,function = "spi6";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <1>;
+ };
+ gpio_x4_aud_px4 {
+ nvidia,pins = "gpio_x4_aud_px4",
+ "gpio_x7_aud_px7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gpio_x5_aud_px5 {
+ nvidia,pins = "gpio_x5_aud_px5";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gpio_w2_aud_pw2 {
+ nvidia,pins = "gpio_w2_aud_pw2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gpio_w3_aud_pw3 {
+ nvidia,pins = "gpio_w3_aud_pw3";
+ nvidia,function = "spi6";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gpio_x1_aud_px1 {
+ nvidia,pins = "gpio_x1_aud_px1";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gpio_x3_aud_px3 {
+ nvidia,pins = "gpio_x3_aud_px3";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ dap3_fs_pp0 {
+ nvidia,pins = "dap3_fs_pp0";
+ nvidia,function = "i2s2";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ dap3_dout_pp2 {
+ nvidia,pins = "dap3_dout_pp2";
+ nvidia,function = "i2s2";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb5",
+ "pbb6",
+ "pbb7";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ pcc1 {
+ nvidia,pins = "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gmi_ad0_pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad1_pg1";
+ nvidia,function = "gmi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gmi_ad10_ph2 {
+ nvidia,pins = "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad13_ph5",
+ "gmi_ad8_ph0",
+ "gmi_clk_pk1";
+ nvidia,function = "gmi";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ gmi_ad2_pg2 {
+ nvidia,pins = "gmi_ad2_pg2",
+ "gmi_ad3_pg3";
+ nvidia,function = "gmi";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gmi_adv_n_pk0 {
+ nvidia,pins = "gmi_adv_n_pk0",
+ "gmi_cs0_n_pj0",
+ "gmi_cs2_n_pk3",
+ "gmi_cs4_n_pk2",
+ "gmi_cs7_n_pi6",
+ "gmi_dqs_p_pj3",
+ "gmi_iordy_pi5",
+ "gmi_wp_n_pc7";
+ nvidia,function = "gmi";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ gmi_cs3_n_pk4 {
+ nvidia,pins = "gmi_cs3_n_pk4";
+ nvidia,function = "gmi";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ kb_col3_pq3 {
+ nvidia,pins = "kb_col3_pq3",
+ "kb_col6_pq6",
+ "kb_col7_pq7";
+ nvidia,function = "kbc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ kb_col5_pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "kbc";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ kb_row3_pr3 {
+ nvidia,pins = "kb_row3_pr3",
+ "kb_row4_pr4",
+ "kb_row6_pr6",
+ "kb_row8_ps0";
+ nvidia,function = "kbc";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ clk3_req_pee1 {
+ nvidia,pins = "clk3_req_pee1";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ pu4 {
+ nvidia,pins = "pu4";
+ nvidia,function = "displayb";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <0>;
+ };
+ pu5 {
+ nvidia,pins = "pu5",
+ "pu6";
+ nvidia,function = "displayb";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ hdmi_int_pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ nvidia,enable-input = <1>;
+ };
+ clk1_req_pee2 {
+ nvidia,pins = "clk1_req_pee2",
+ "usb_vbus_en1_pn5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ nvidia,enable-input = <0>;
+ };
+
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <1>;
+ nvidia,schmitt = <0>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <36>;
+ nvidia,pull-up-strength = <20>;
+ nvidia,slew-rate-rising = <2>;
+ nvidia,slew-rate-falling = <2>;
+ };
+ drive_sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <1>;
+ nvidia,schmitt = <0>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <22>;
+ nvidia,pull-up-strength = <36>;
+ nvidia,slew-rate-rising = <0>;
+ nvidia,slew-rate-falling = <0>;
+ };
+ drive_gma {
+ nvidia,pins = "drive_gma";
+ nvidia,high-speed-mode = <1>;
+ nvidia,schmitt = <0>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <2>;
+ nvidia,pull-up-strength = <1>;
+ nvidia,slew-rate-rising = <0>;
+ nvidia,slew-rate-falling = <0>;
+ nvidia,drive-type = <1>;
+ };
+ };
+ };
+
serial@70006300 {
status = "okay";
- clock-frequency = <408000000>;
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ battery: smart-battery {
+ compatible = "ti,bq20z45", "sbs,sbs-battery";
+ reg = <0xb>;
+ battery-name = "battery";
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <100>;
+ };
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps51632 {
+ compatible = "ti,tps51632";
+ reg = <0x43>;
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1520000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ tps65090 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <72 0x04>; /* gpio PJ0 */
+
+ vsys1-supply = <&vdd_ac_bat_reg>;
+ vsys2-supply = <&vdd_ac_bat_reg>;
+ vsys3-supply = <&vdd_ac_bat_reg>;
+ infet1-supply = <&vdd_ac_bat_reg>;
+ infet2-supply = <&vdd_ac_bat_reg>;
+ infet3-supply = <&tps65090_dcdc2_reg>;
+ infet4-supply = <&tps65090_dcdc2_reg>;
+ infet5-supply = <&tps65090_dcdc2_reg>;
+ infet6-supply = <&tps65090_dcdc2_reg>;
+ infet7-supply = <&tps65090_dcdc2_reg>;
+ vsys-l1-supply = <&vdd_ac_bat_reg>;
+ vsys-l2-supply = <&vdd_ac_bat_reg>;
+
+ regulators {
+ tps65090_dcdc1_reg: dcdc1 {
+ regulator-name = "vdd-sys-5v0";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ tps65090_dcdc2_reg: dcdc2 {
+ regulator-name = "vdd-sys-3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ dcdc3 {
+ regulator-name = "vdd-ao";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ fet1 {
+ regulator-name = "vdd-lcd-bl";
+ };
+
+ fet3 {
+ regulator-name = "vdd-modem-3v3";
+ };
+
+ fet4 {
+ regulator-name = "avdd-lcd";
+ };
+
+ fet5 {
+ regulator-name = "vdd-lvds";
+ };
+
+ fet6 {
+ regulator-name = "vdd-sd-slot";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ fet7 {
+ regulator-name = "vdd-com-3v3";
+ };
+
+ ldo1 {
+ regulator-name = "vdd-sby-5v0";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "vdd-sby-3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
pmc {
nvidia,invert-interrupt;
};
+
+ sdhci@78000400 {
+ cd-gpios = <&gpio 170 1>; /* gpio PV2 */
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ sdhci@78000600 {
+ bus-width = <8>;
+ status = "okay";
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ dvdd_ts_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "dvdd_ts";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&gpio 61 0>; /* GPIO PH5 */
+ };
+
+ lcd_bl_en_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "lcd_bl_en";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 58 0>; /* GPIO PH2 */
+ };
+
+ usb1_vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 108 0>; /* GPIO PN4 */
+ gpio-open-drain;
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
+
+ usb3_vbus_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 86 0>; /* GPIO PK6 */
+ gpio-open-drain;
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
+
+ vdd_hdmi_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vdd_hdmi_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio 81 0>; /* GPIO PK1 */
+ vin-supply = <&tps65090_dcdc1_reg>;
+ };
+ };
};
serial@70006300 {
status = "okay";
- clock-frequency = <408000000>;
};
pmc {
nvidia,invert-interrupt;
};
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
};
compatible = "nvidia,tegra114";
interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ };
+
gic: interrupt-controller {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
- compatible = "nvidia,tegra114-car, nvidia,tegra30-car";
+ compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
+ apbdma: dma {
+ compatible = "nvidia,tegra114-apbdma";
+ reg = <0x6000a000 0x1400>;
+ interrupts = <0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04
+ 0 128 0x04
+ 0 129 0x04
+ 0 130 0x04
+ 0 131 0x04
+ 0 132 0x04
+ 0 133 0x04
+ 0 134 0x04
+ 0 135 0x04
+ 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04>;
+ clocks = <&tegra_car 34>;
+ };
+
ahb: ahb {
compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
reg = <0x6000c004 0x14c>;
0x70003000 0x40c>; /* Mux registers */
};
- serial@70006000 {
+ /*
+ * There are two serial driver i.e. 8250 based simple serial
+ * driver and APB DMA based serial driver for higher baudrate
+ * and performace. To enable the 8250 based driver, the compatible
+ * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
+ * the APB DMA based serial driver, the comptible is
+ * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
+ */
+ uarta: serial@70006000 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
+ nvidia,dma-request-selector = <&apbdma 8>;
status = "disabled";
+ clocks = <&tegra_car 6>;
};
- serial@70006040 {
+ uartb: serial@70006040 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <0 37 0x04>;
+ nvidia,dma-request-selector = <&apbdma 9>;
status = "disabled";
+ clocks = <&tegra_car 192>;
};
- serial@70006200 {
+ uartc: serial@70006200 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <0 46 0x04>;
+ nvidia,dma-request-selector = <&apbdma 10>;
status = "disabled";
+ clocks = <&tegra_car 55>;
};
- serial@70006300 {
+ uartd: serial@70006300 {
compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <0 90 0x04>;
+ nvidia,dma-request-selector = <&apbdma 19>;
+ status = "disabled";
+ clocks = <&tegra_car 65>;
+ };
+
+ pwm: pwm {
+ compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ clocks = <&tegra_car 17>;
+ status = "disabled";
+ };
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 12>;
+ clock-names = "div-clk";
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <0 84 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 54>;
+ clock-names = "div-clk";
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <0 92 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 67>;
+ clock-names = "div-clk";
+ status = "disabled";
+ };
+
+ i2c@7000c700 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000c700 0x100>;
+ interrupts = <0 120 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 103>;
+ clock-names = "div-clk";
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ compatible = "nvidia,tegra114-i2c";
+ reg = <0x7000d000 0x100>;
+ interrupts = <0 53 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 47>;
+ clock-names = "div-clk";
+ status = "disabled";
+ };
+
+ spi@7000d400 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d400 0x200>;
+ interrupts = <0 59 0x04>;
+ nvidia,dma-request-selector = <&apbdma 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 41>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d600 0x200>;
+ interrupts = <0 82 0x04>;
+ nvidia,dma-request-selector = <&apbdma 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 44>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d800 0x200>;
+ interrupts = <0 83 0x04>;
+ nvidia,dma-request-selector = <&apbdma 17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 46>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000da00 0x200>;
+ interrupts = <0 93 0x04>;
+ nvidia,dma-request-selector = <&apbdma 18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 68>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000dc00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000dc00 0x200>;
+ interrupts = <0 94 0x04>;
+ nvidia,dma-request-selector = <&apbdma 27>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 104>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000de00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000de00 0x200>;
+ interrupts = <0 79 0x04>;
+ nvidia,dma-request-selector = <&apbdma 28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 105>;
+ clock-names = "spi";
status = "disabled";
};
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
+ };
+
+ kbc {
+ compatible = "nvidia,tegra114-kbc";
+ reg = <0x7000e200 0x100>;
+ interrupts = <0 85 0x04>;
+ clocks = <&tegra_car 36>;
+ status = "disabled";
};
pmc {
- compatible = "nvidia,tegra114-pmc", "nvidia,tegra30-pmc";
+ compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 261>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
};
iommu {
nvidia,ahb = <&ahb>;
};
+ sdhci@78000000 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000000 0x200>;
+ interrupts = <0 14 0x04>;
+ clocks = <&tegra_car 14>;
+ status = "disable";
+ };
+
+ sdhci@78000200 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000200 0x200>;
+ interrupts = <0 15 0x04>;
+ clocks = <&tegra_car 9>;
+ status = "disable";
+ };
+
+ sdhci@78000400 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000400 0x200>;
+ interrupts = <0 19 0x04>;
+ clocks = <&tegra_car 69>;
+ status = "disable";
+ };
+
+ sdhci@78000600 {
+ compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+ reg = <0x78000600 0x200>;
+ interrupts = <0 31 0x04>;
+ clocks = <&tegra_car 15>;
+ status = "disable";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
};
};
+ pmc {
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <3875>;
+ nvidia,sys-clock-req-active-high;
+ };
+
memory-controller@7000f400 {
emc-table@83250 {
reg = <83250>;
};
sdhci@c8000600 {
- cd-gpios = <&gpio 23 0>; /* gpio PC7 */
+ cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
sound {
"Mic", "MIC1";
nvidia,ac97-controller = <&ac97>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
regulators {
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <3875>;
+ nvidia,sys-clock-req-active-high;
};
usb@c5000000 {
sdhci@c8000200 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
kbc {
status = "okay";
nvidia,debounce-delay-ms = <2>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
model = "Avionic Design Medcom-Wide board";
compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+ pwm {
+ status = "okay";
+ };
+
i2c@7000c000 {
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <0>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,sys-clock-req-active-high;
};
usb@c5000000 {
sdhci@c8000000 {
status = "okay";
- cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+ cd-gpios = <&gpio 173 1>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
gpio-keys {
nvidia,audio-codec = <&alc5632>;
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <3875>;
+ nvidia,sys-clock-req-active-high;
};
memory-controller@7000f400 {
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
gpio-keys {
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <3875>;
+ nvidia,sys-clock-req-active-high;
};
usb@c5008000 {
};
sdhci@c8000600 {
- cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+ cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
};
};
+ pmc {
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <3875>;
+ nvidia,sys-clock-req-active-high;
+ };
+
usb@c5000000 {
status = "okay";
nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 121 0>; /* gpio PP1 */
+ cd-gpios = <&gpio 121 1>; /* gpio PP1 */
wp-gpios = <&gpio 122 0>; /* gpio PP2 */
bus-width = <4>;
};
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 190 1>; /* gpio PX6, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 191 1>; /* gpio PX7, active low */
compatible = "nvidia,tegra-audio-trimslice";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <100>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <458>;
+ nvidia,sys-clock-req-active-high;
};
usb@c5000000 {
status = "okay";
power-gpios = <&gpio 86 0>; /* gpio PK6 */
bus-width = <4>;
+ keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
};
regulators {
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <1000>;
+ nvidia,core-pwr-good-time = <0 3845>;
+ nvidia,core-pwr-off-time = <93727>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ nvidia,combined-power-req;
};
usb@c5000000 {
sdhci@c8000400 {
status = "okay";
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
kbc {
nvidia,repeat-delay-ms = <160>;
nvidia,kbc-row-pins = <0 1 2>;
nvidia,kbc-col-pins = <16 17>;
+ nvidia,wakeup-source;
linux,keymap = <0x00000074 /* KEY_POWER */
0x01000066 /* KEY_HOME */
0x0101009E /* KEY_BACK */
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
0 1 0x04
0 41 0x04
0 42 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
-
+
tegra_ac97: ac97 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car 17>;
+ status = "disabled";
};
rtc {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
i2c@7000c000 {
spi@7000d800 {
compatible = "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 110>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
};
memory-controller@7000f000 {
#size-cells = <0>;
};
- phy1: usb-phy@c5000400 {
- compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5000400 0x3c00>;
- phy_type = "utmi";
- nvidia,has-legacy-mode;
- clocks = <&tegra_car 22>, <&tegra_car 127>;
- clock-names = "phy", "pll_u";
- };
-
- phy2: usb-phy@c5004400 {
- compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5004400 0x3c00>;
- phy_type = "ulpi";
- clocks = <&tegra_car 94>, <&tegra_car 127>;
- clock-names = "phy", "pll_u";
- };
-
- phy3: usb-phy@c5008400 {
- compatible = "nvidia,tegra20-usb-phy";
- reg = <0xc5008400 0x3C00>;
- phy_type = "utmi";
- clocks = <&tegra_car 22>, <&tegra_car 127>;
- clock-names = "phy", "pll_u";
- };
-
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
status = "disabled";
};
+ phy1: usb-phy@c5000400 {
+ compatible = "nvidia,tegra20-usb-phy";
+ reg = <0xc5000400 0x3c00>;
+ phy_type = "utmi";
+ nvidia,has-legacy-mode;
+ clocks = <&tegra_car 22>, <&tegra_car 127>;
+ clock-names = "phy", "pll_u";
+ };
+
usb@c5004000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5004000 0x4000>;
status = "disabled";
};
+ phy2: usb-phy@c5004400 {
+ compatible = "nvidia,tegra20-usb-phy";
+ reg = <0xc5004400 0x3c00>;
+ phy_type = "ulpi";
+ clocks = <&tegra_car 93>, <&tegra_car 127>;
+ clock-names = "phy", "pll_u";
+ };
+
usb@c5008000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5008000 0x4000>;
status = "disabled";
};
+ phy3: usb-phy@c5008400 {
+ compatible = "nvidia,tegra20-usb-phy";
+ reg = <0xc5008400 0x3c00>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 22>, <&tegra_car 127>;
+ clock-names = "phy", "pll_u";
+ };
+
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
pmc {
status = "okay";
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <200>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
};
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
sdhci@78000600 {
status = "okay";
bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
regulators {
status = "okay";
power-gpios = <&gpio 28 0>; /* gpio PD4 */
bus-width = <4>;
+ keep-power-in-suspend;
};
};
status = "okay";
power-gpios = <&gpio 27 0>; /* gpio PD3 */
bus-width = <4>;
+ keep-power-in-suspend;
};
};
pmc {
status = "okay";
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <2>;
+ nvidia,cpu-pwr-good-time = <2000>;
+ nvidia,cpu-pwr-off-time = <200>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
};
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
sdhci@78000600 {
status = "okay";
bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
regulators {
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+
+ clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car 17>;
+ status = "disabled";
};
rtc {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
i2c@7000c000 {
spi@7000d800 {
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
- reg = <0x7000d480 0x200>;
+ reg = <0x7000d800 0x200>;
interrupts = <0 83 0x04>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
};
pmc {
- compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+ compatible = "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car 218>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
};
memory-controller {
compatible = "ti,twl4030-wdt";
};
+ vcc: regulator-vdd1 {
+ compatible = "ti,twl4030-vdd1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1450000>;
+ };
+
vdac: regulator-vdac {
compatible = "ti,twl4030-vdac";
regulator-min-microvolt = <1800000>;
#interrupt-cells = <1>;
};
- twl4030-usb {
+ usb2_phy: twl4030-usb {
compatible = "ti,twl4030-usb";
interrupts = <10>, <4>;
usb1v5-supply = <&vusb1v5>;
usb3v1-supply = <&vusb3v1>;
usb_mode = <1>;
};
+
+ twl_pwm: pwm {
+ compatible = "ti,twl4030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ compatible = "ti,twl4030-pwmled";
+ #pwm-cells = <2>;
+ };
};
compatible = "ti,twl6030-usb";
interrupts = <4>, <10>;
};
+
+ twl_pwm: pwm {
+ /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+ };
+
+ twl_pwmled: pwmled {
+ /* provides one PWM (id 0 for Charging indicator LED) */
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+ };
};
int twd_local_timer_register(struct twd_local_timer *);
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
#endif
}
#ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
- { .compatible = "arm,cortex-a9-twd-timer", },
- { .compatible = "arm,cortex-a5-twd-timer", },
- { .compatible = "arm,arm11mp-twd-timer", },
- { },
-};
-
-void __init twd_local_timer_of_register(void)
+static void __init twd_local_timer_of_register(struct device_node *np)
{
- struct device_node *np;
int err;
if (!is_smp() || !setup_max_cpus)
return;
- np = of_find_matching_node(NULL, twd_of_match);
- if (!np)
- return;
-
twd_ppi = irq_of_parse_and_map(np, 0);
if (!twd_ppi) {
err = -EINVAL;
out:
WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
}
+CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
#endif
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
+ select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
help
Enable EXYNOS5440 SoC support
-config EXYNOS4_MCT
- bool
- default y
- help
- Use MCT (Multi Core Timer) as kernel timers
-
config EXYNOS_DEV_DMA
bool
help
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
- select S5P_HRT
select S5P_SETUP_MIPIPHY
+ select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select ARM_AMBA
+ select CLKSRC_OF
select CPU_EXYNOS4210
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
+ select S5P_DEV_MFC
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
default y
depends on ARCH_EXYNOS5
select ARM_AMBA
+ select CLKSRC_OF
select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
# Core
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_EXYNOS4_MCT) += mct.o
-
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
+++ /dev/null
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
- SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
- SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
- SAVE_ITEM(EXYNOS4_CLKSRC_TV),
- SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
- SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
- SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
- SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
- SAVE_ITEM(EXYNOS4_CLKDIV_TV),
- SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
- SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
- SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
- SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
- SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
- SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
- SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
- SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
- SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
- SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
- SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
- SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
- SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
- SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
-};
-#endif
-
-static struct clk exynos4_clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-static struct clk exynos4_clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-static struct clk exynos4_clk_sclk_usbphy0 = {
- .name = "sclk_usbphy0",
- .rate = 27000000,
-};
-
-static struct clk exynos4_clk_sclk_usbphy1 = {
- .name = "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
-}
-
-int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
-}
-
-int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos4_clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &exynos4_clk_mout_apll.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk exynos4_clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
-
- /* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *exynos4_clkset_moutcore_list[] = {
- [0] = &exynos4_clk_mout_apll.clk,
- [1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_moutcore = {
- .sources = exynos4_clkset_moutcore_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list),
-};
-
-static struct clksrc_clk exynos4_clk_moutcore = {
- .clk = {
- .name = "moutcore",
- },
- .sources = &exynos4_clkset_moutcore,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_coreclk = {
- .clk = {
- .name = "core_clk",
- .parent = &exynos4_clk_moutcore.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_armclk = {
- .clk = {
- .name = "armclk",
- .parent = &exynos4_clk_coreclk.clk,
- },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem0 = {
- .clk = {
- .name = "aclk_corem0",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cores = {
- .clk = {
- .name = "aclk_cores",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem1 = {
- .clk = {
- .name = "aclk_corem1",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_periphclk = {
- .clk = {
- .name = "periphclk",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-static struct clk *exynos4_clkset_corebus_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_corebus = {
- .sources = exynos4_clkset_corebus_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_corebus = {
- .clk = {
- .name = "mout_corebus",
- },
- .sources = &exynos4_clkset_mout_corebus,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dmc = {
- .clk = {
- .name = "sclk_dmc",
- .parent = &exynos4_clk_mout_corebus.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cored = {
- .clk = {
- .name = "aclk_cored",
- .parent = &exynos4_clk_sclk_dmc.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corep = {
- .clk = {
- .name = "aclk_corep",
- .parent = &exynos4_clk_aclk_cored.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &exynos4_clk_mout_corebus.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &exynos4_clk_aclk_acp.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *exynos4_clkset_aclk_top_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_aclk = {
- .sources = exynos4_clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos4_clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_100 = {
- .clk = {
- .name = "aclk_100",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_160 = {
- .clk = {
- .name = "aclk_160",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk exynos4_clk_aclk_133 = {
- .clk = {
- .name = "aclk_133",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *exynos4_clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &exynos4_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos4_clkset_vpllsrc = {
- .sources = exynos4_clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos4_clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos4_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_vpllsrc,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_vpll_list[] = {
- [0] = &exynos4_clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_vpll = {
- .sources = exynos4_clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &exynos4_clkset_sclk_vpll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk exynos4_init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1<<24),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "jpeg",
- .id = 0,
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "tsi",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.0",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.1",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.2",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.3",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "biu",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "onenand",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "nfcon",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "dac",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "mixer",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "vp",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "hdmiphy",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dacphy",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_dac_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "adc",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "tmu_apbif",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "keypad",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "rtc",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "watchdog",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "usbhost",
- .enable = exynos4_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 12),
- }, {
- .name = "otg",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 23),
- }, {
- .name = "slimbus",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "spdif",
- .devname = "samsung-spdif",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 26),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.0",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.1",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.2",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.4",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.5",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.6",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.7",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.8",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.10",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }
-};
-
-static struct clk exynos4_init_clocks_on[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk exynos4_clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk exynos4_clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk exynos4_clk_mdma1 = {
- .name = "dma",
- .devname = "dma-pl330.2",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)),
-};
-
-static struct clk exynos4_clk_fimd0 = {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-struct clk *exynos4_clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &clk_xusbxti,
- [2] = &exynos4_clk_sclk_hdmi27m,
- [3] = &exynos4_clk_sclk_usbphy0,
- [4] = &exynos4_clk_sclk_usbphy1,
- [5] = &exynos4_clk_sclk_hdmiphy,
- [6] = &exynos4_clk_mout_mpll.clk,
- [7] = &exynos4_clk_mout_epll.clk,
- [8] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_group = {
- .sources = exynos4_clkset_group_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d0_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d0 = {
- .sources = exynos4_clkset_mout_g2d0_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d1_list[] = {
- [0] = &exynos4_clk_mout_epll.clk,
- [1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d1 = {
- .sources = exynos4_clkset_mout_g2d1_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
-};
-
-static struct clk *exynos4_clkset_mout_mfc0_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
- .sources = exynos4_clkset_mout_mfc0_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc0 = {
- .clk = {
- .name = "mout_mfc0",
- },
- .sources = &exynos4_clkset_mout_mfc0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc1_list[] = {
- [0] = &exynos4_clk_mout_epll.clk,
- [1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
- .sources = exynos4_clkset_mout_mfc1_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc1 = {
- .clk = {
- .name = "mout_mfc1",
- },
- .sources = &exynos4_clkset_mout_mfc1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc_list[] = {
- [0] = &exynos4_clk_mout_mfc0.clk,
- [1] = &exynos4_clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc = {
- .sources = exynos4_clkset_mout_mfc_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
-};
-
-static struct clk *exynos4_clkset_sclk_dac_list[] = {
- [0] = &exynos4_clk_sclk_vpll.clk,
- [1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_dac = {
- .sources = exynos4_clkset_sclk_dac_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dac = {
- .clk = {
- .name = "sclk_dac",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_sclk_dac,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &exynos4_clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
- [0] = &exynos4_clk_sclk_pixel.clk,
- [1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
- .sources = exynos4_clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_sclk_hdmi,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_mixer_list[] = {
- [0] = &exynos4_clk_sclk_dac.clk,
- [1] = &exynos4_clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_mixer = {
- .sources = exynos4_clkset_sclk_mixer_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mixer = {
- .clk = {
- .name = "sclk_mixer",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_sclk_mixer,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *exynos4_sclk_tv[] = {
- &exynos4_clk_sclk_dac,
- &exynos4_clk_sclk_pixel,
- &exynos4_clk_sclk_hdmi,
- &exynos4_clk_sclk_mixer,
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clksrcs[] = {
- {
- .clk = {
- .name = "sclk_pwm",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clksrc_mask_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mfc",
- .devname = "s5p-mfc",
- },
- .sources = &exynos4_clkset_mout_mfc,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "ciu",
- .parent = &exynos4_clk_dout_mmc4.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
- }
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.0",
- .parent = &exynos4_clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.1",
- .parent = &exynos4_clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.2",
- .parent = &exynos4_clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.3",
- .parent = &exynos4_clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi0 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.0",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi1 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.1",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi2 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.2",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos4_clk_mdout_spi0.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos4_clk_mdout_spi1.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos4_clk_mdout_spi2.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos4_sysclks[] = {
- &exynos4_clk_mout_apll,
- &exynos4_clk_sclk_apll,
- &exynos4_clk_mout_epll,
- &exynos4_clk_mout_mpll,
- &exynos4_clk_moutcore,
- &exynos4_clk_coreclk,
- &exynos4_clk_armclk,
- &exynos4_clk_aclk_corem0,
- &exynos4_clk_aclk_cores,
- &exynos4_clk_aclk_corem1,
- &exynos4_clk_periphclk,
- &exynos4_clk_mout_corebus,
- &exynos4_clk_sclk_dmc,
- &exynos4_clk_aclk_cored,
- &exynos4_clk_aclk_corep,
- &exynos4_clk_aclk_acp,
- &exynos4_clk_pclk_acp,
- &exynos4_clk_vpllsrc,
- &exynos4_clk_sclk_vpll,
- &exynos4_clk_aclk_200,
- &exynos4_clk_aclk_100,
- &exynos4_clk_aclk_160,
- &exynos4_clk_aclk_133,
- &exynos4_clk_dout_mmc0,
- &exynos4_clk_dout_mmc1,
- &exynos4_clk_dout_mmc2,
- &exynos4_clk_dout_mmc3,
- &exynos4_clk_dout_mmc4,
- &exynos4_clk_mout_mfc0,
- &exynos4_clk_mout_mfc1,
-};
-
-static struct clk *exynos4_clk_cdev[] = {
- &exynos4_clk_pdma0,
- &exynos4_clk_pdma1,
- &exynos4_clk_mdma1,
- &exynos4_clk_fimd0,
-};
-
-static struct clksrc_clk *exynos4_clksrc_cdev[] = {
- &exynos4_clk_sclk_uart0,
- &exynos4_clk_sclk_uart1,
- &exynos4_clk_sclk_uart2,
- &exynos4_clk_sclk_uart3,
- &exynos4_clk_sclk_mmc0,
- &exynos4_clk_sclk_mmc1,
- &exynos4_clk_sclk_mmc2,
- &exynos4_clk_sclk_mmc3,
- &exynos4_clk_sclk_spi0,
- &exynos4_clk_sclk_spi1,
- &exynos4_clk_sclk_spi2,
- &exynos4_clk_mdout_spi0,
- &exynos4_clk_mdout_spi1,
- &exynos4_clk_mdout_spi2,
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
- CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
- CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
- CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
- CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
- CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
- CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
- CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
- CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
- CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
- if (soc_is_exynos4210())
- return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
- pll_4508);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
- else
- return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
- .get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 exynos4_vpll_div[][8] = {
- { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
- { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int vpll_con0, vpll_con1 = 0;
- unsigned int i;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
- vpll_con0 &= ~(0x1 << 27 | \
- PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
- vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
- PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
- PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
- if (exynos4_vpll_div[i][0] == rate) {
- vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][7] << 27;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(exynos4_vpll_div)) {
- printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
- __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
-
- /* Wait for VPLL lock */
- while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
- continue;
-
- clk->rate = rate;
- return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
- .get_rate = exynos4_vpll_get_rate,
- .set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll = 0;
- unsigned long mpll = 0;
- unsigned long epll = 0;
- unsigned long vpll = 0;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long sclk_dmc;
- unsigned long aclk_200;
- unsigned long aclk_100;
- unsigned long aclk_160;
- unsigned long aclk_133;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- if (soc_is_exynos4210()) {
- apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
- pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
- pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
- __raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
- __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
- __raw_readl(EXYNOS4_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
- __raw_readl(EXYNOS4_VPLL_CON1));
- } else {
- /* nothing */
- }
-
- clk_fout_apll.ops = &exynos4_fout_apll_ops;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.ops = &exynos4_vpll_ops;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
- apll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&exynos4_clk_armclk.clk);
- sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
-
- aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
- aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
- aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
- aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
-
- printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
- "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
- armclk, sclk_dmc, aclk_200,
- aclk_100, aclk_160, aclk_133);
-
- clk_f.rate = armclk;
- clk_h.rate = sclk_dmc;
- clk_p.rate = aclk_100;
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
- s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
-}
-
-static struct clk *exynos4_clks[] __initdata = {
- &exynos4_clk_sclk_hdmi27m,
- &exynos4_clk_sclk_hdmiphy,
- &exynos4_clk_sclk_usbphy0,
- &exynos4_clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
- return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4_clock_syscore_ops = {
- .suspend = exynos4_clock_suspend,
- .resume = exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
- s3c_register_clksrc(exynos4_sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
- s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
- s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
- s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
-
- s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
- s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
-
- s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
- s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
- clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
- register_syscore_ops(&exynos4_clock_syscore_ops);
- s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
-}
+++ /dev/null
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
+++ /dev/null
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
- SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
- SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
- /* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
- [0] = &exynos4210_clk_mout_g2d0.clk,
- [1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
- .sources = exynos4210_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_sata",
- .id = -1,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_mout_corebus,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4210_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sataphy",
- .id = -1,
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sata",
- .id = -1,
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.11",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
- return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
- .suspend = exynos4210_clock_suspend,
- .resume = exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
- int ptr;
-
- exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
- exynos4_clk_mout_mpll.reg_src.shift = 8;
- exynos4_clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4210_clock_syscore_ops);
-}
+++ /dev/null
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
- SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
- SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
- SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static struct clk *clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
- .sources = clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &clk_src_mpll_user,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
- [0] = &exynos4x12_clk_mout_g2d0.clk,
- [1] = &exynos4x12_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
- .sources = exynos4x12_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
-};
-
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4x12_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = exynos4_clk_ip_dmc_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.12",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (7 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.13",
- .enable = exynos4212_clk_ip_isp1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.14",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.15",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "flite",
- .devname = "exynos-fimc-lite.0",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "flite",
- .devname = "exynos-fimc-lite.1",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_dmc_ctrl,
- .ctrlbit = (1 << 23),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
- return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
- .suspend = exynos4212_clock_suspend,
- .resume = exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
- int ptr;
-
- /* usbphy1 is removed */
- exynos4_clkset_group_list[4] = NULL;
-
- /* mout_mpll_user is used */
- exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
- exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
- exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
- exynos4_clk_mout_mpll.reg_src.shift = 12;
- exynos4_clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4212_clock_syscore_ops);
-}
+++ /dev/null
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Clock support for EXYNOS5 SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos5_clock_save[] = {
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS),
- SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK),
- SAVE_ITEM(EXYNOS5_CLKDIV_TOP0),
- SAVE_ITEM(EXYNOS5_CLKDIV_TOP1),
- SAVE_ITEM(EXYNOS5_CLKDIV_GSCL),
- SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKDIV_GEN),
- SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5),
- SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP0),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP1),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP2),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP3),
- SAVE_ITEM(EXYNOS5_CLKSRC_GSCL),
- SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKSRC_FSYS),
- SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1),
- SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP),
- SAVE_ITEM(EXYNOS5_EPLL_CON0),
- SAVE_ITEM(EXYNOS5_EPLL_CON1),
- SAVE_ITEM(EXYNOS5_EPLL_CON2),
- SAVE_ITEM(EXYNOS5_VPLL_CON0),
- SAVE_ITEM(EXYNOS5_VPLL_CON1),
- SAVE_ITEM(EXYNOS5_VPLL_CON2),
- SAVE_ITEM(EXYNOS5_PWR_CTRL1),
- SAVE_ITEM(EXYNOS5_PWR_CTRL2),
-};
-#endif
-
-static struct clk exynos5_clk_sclk_dptxphy = {
- .name = "sclk_dptx",
-};
-
-static struct clk exynos5_clk_sclk_hdmi24m = {
- .name = "sclk_hdmi24m",
- .rate = 24000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-static struct clk exynos5_clk_sclk_usbphy = {
- .name = "sclk_usbphy",
- .rate = 48000000,
-};
-
-static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
-}
-
-static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
-}
-
-static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
-}
-
-static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
-}
-
-static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
-}
-
-static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
-}
-
-static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
-}
-
-static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
-}
-
-static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
-}
-
-static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos5_clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &exynos5_clk_mout_apll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
- .clk = {
- .name = "mout_bpll_fout",
- },
- .sources = &clk_src_bpll_fout,
- .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_list[] = {
- [0] = &clk_fin_bpll,
- [1] = &exynos5_clk_mout_bpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll = {
- .sources = exynos5_clk_src_bpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll = {
- .clk = {
- .name = "mout_bpll",
- },
- .sources = &exynos5_clk_src_bpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll_user = {
- .sources = exynos5_clk_src_bpll_user_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_user = {
- .clk = {
- .name = "mout_bpll_user",
- },
- .sources = &exynos5_clk_src_bpll_user,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpll = {
- .clk = {
- .name = "mout_cpll",
- },
- .sources = &clk_src_cpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
- .clk = {
- .name = "mout_mpll_fout",
- },
- .sources = &clk_src_mpll_fout,
- .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_mpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll = {
- .sources = exynos5_clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &exynos5_clk_src_mpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
-};
-
-static struct clk *exynos_clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &exynos5_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos5_clkset_vpllsrc = {
- .sources = exynos_clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos5_clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos5_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_vpllsrc,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_sclk_vpll_list[] = {
- [0] = &exynos5_clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_vpll = {
- .sources = exynos5_clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &exynos5_clkset_sclk_vpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &exynos5_clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
-};
-
-static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
- [0] = &exynos5_clk_sclk_pixel.clk,
- [1] = &exynos5_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
- .sources = exynos5_clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos5_clksrc_mask_disp1_0_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos5_clkset_sclk_hdmi,
- .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk *exynos5_sclk_tv[] = {
- &exynos5_clk_sclk_pixel,
- &exynos5_clk_sclk_hdmi,
-};
-
-static struct clk *exynos5_clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll_user = {
- .sources = exynos5_clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &exynos5_clk_src_mpll_user,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_mout_cpu_list[] = {
- [0] = &exynos5_clk_mout_apll.clk,
- [1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_mout_cpu = {
- .sources = exynos5_clkset_mout_cpu_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpu = {
- .clk = {
- .name = "mout_cpu",
- },
- .sources = &exynos5_clkset_mout_cpu,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_armclk = {
- .clk = {
- .name = "dout_armclk",
- .parent = &exynos5_clk_mout_cpu.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_arm2clk = {
- .clk = {
- .name = "dout_arm2clk",
- .parent = &exynos5_clk_dout_armclk.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
-};
-
-static struct clk exynos5_clk_armclk = {
- .name = "armclk",
- .parent = &exynos5_clk_dout_arm2clk.clk,
-};
-
-/* Core list of CMU_CDREX side */
-
-static struct clk *exynos5_clkset_cdrex_list[] = {
- [0] = &exynos5_clk_mout_mpll.clk,
- [1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_cdrex = {
- .sources = exynos5_clkset_cdrex_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list),
-};
-
-static struct clksrc_clk exynos5_clk_cdrex = {
- .clk = {
- .name = "clk_cdrex",
- },
- .sources = &exynos5_clkset_cdrex,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &exynos5_clk_mout_mpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &exynos5_clk_aclk_acp.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-static struct clk *exynos5_clkset_aclk_top_list[] = {
- [0] = &exynos5_clk_mout_mpll_user.clk,
- [1] = &exynos5_clk_mout_bpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk = {
- .sources = exynos5_clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_400 = {
- .clk = {
- .name = "aclk_400",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-};
-
-static struct clk *exynos5_clkset_aclk_333_166_list[] = {
- [0] = &exynos5_clk_mout_cpll.clk,
- [1] = &exynos5_clk_mout_mpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
- .sources = exynos5_clkset_aclk_333_166_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_333 = {
- .clk = {
- .name = "aclk_333",
- },
- .sources = &exynos5_clkset_aclk_333_166,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_166 = {
- .clk = {
- .name = "aclk_166",
- },
- .sources = &exynos5_clkset_aclk_333_166,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_266 = {
- .clk = {
- .name = "aclk_266",
- .parent = &exynos5_clk_mout_mpll_user.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66_pre = {
- .clk = {
- .name = "aclk_66_pre",
- .parent = &exynos5_clk_mout_mpll_user.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66 = {
- .clk = {
- .name = "aclk_66",
- .parent = &exynos5_clk_aclk_66_pre.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
- .clk = {
- .name = "mout_aclk_300_gscl_mid",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
- [0] = &exynos5_clk_sclk_vpll.clk,
- [1] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
- .sources = exynos5_clkset_aclk_300_mid1_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
- .clk = {
- .name = "mout_aclk_300_gscl_mid1",
- },
- .sources = &exynos5_clkset_aclk_300_gscl_mid1,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
- [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
- [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
- .sources = exynos5_clkset_aclk_300_gscl_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
- .clk = {
- .name = "mout_aclk_300_gscl",
- },
- .sources = &exynos5_clkset_aclk_300_gscl,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_gscl_300_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &exynos5_clk_mout_aclk_300_gscl.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_gscl_300 = {
- .sources = exynos5_clk_src_gscl_300_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
- .clk = {
- .name = "aclk_300_gscl",
- },
- .sources = &exynos5_clk_src_gscl_300,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
-};
-
-static struct clk exynos5_init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "tmu_apbif",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "rtc",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "watchdog",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "biu", /* bus interface unit clock */
- .devname = "dw_mmc.0",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "biu",
- .devname = "dw_mmc.1",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "biu",
- .devname = "dw_mmc.2",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "biu",
- .devname = "dw_mmc.3",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "sata",
- .devname = "exynos5-sata",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "sata-phy",
- .devname = "exynos5-sata-phy",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "i2c",
- .devname = "exynos5-sata-phy-i2c",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc-v6",
- .enable = exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos5-hdmi",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hdmiphy",
- .devname = "exynos5-hdmi",
- .enable = exynos5_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "mixer",
- .devname = "exynos5-mixer",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "dp",
- .devname = "exynos-dp",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "jpeg",
- .enable = exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "dsim0",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 23),
- }, {
- .name = "spdif",
- .devname = "samsung-spdif",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 26),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "usbhost",
- .enable = exynos5_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 18),
- }, {
- .name = "usbotg",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "nfcon",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "iop",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)),
- }, {
- .name = "core_iop",
- .enable = exynos5_clk_ip_core_ctrl,
- .ctrlbit = ((1 << 21) | (1 << 3)),
- }, {
- .name = "mcu_iop",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.0",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.1",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.2",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.3",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.1",
- .enable = &exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.0",
- .enable = &exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.2",
- .enable = &exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 9)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.3",
- .enable = &exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.4",
- .enable = &exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 6)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.5",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.6",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.7",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.8",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = &exynos5_clk_ip_isp0_ctrl,
- .ctrlbit = (0x3F << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.10",
- .enable = &exynos5_clk_ip_isp1_ctrl,
- .ctrlbit = (0xF << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.11",
- .enable = &exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 8)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.12",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.13",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.14",
- .enable = &exynos5_clk_ip_acp_ctrl,
- .ctrlbit = (1 << 7)
- }
-};
-
-static struct clk exynos5_init_clocks_on[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk exynos5_clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk exynos5_clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 2),
-};
-
-static struct clk exynos5_clk_mdma1 = {
- .name = "dma",
- .devname = "dma-pl330.2",
- .enable = exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 4),
-};
-
-static struct clk exynos5_clk_fimd1 = {
- .name = "fimd",
- .devname = "exynos5-fb.1",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk *exynos5_clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = NULL,
- [2] = &exynos5_clk_sclk_hdmi24m,
- [3] = &exynos5_clk_sclk_dptxphy,
- [4] = &exynos5_clk_sclk_usbphy,
- [5] = &exynos5_clk_sclk_hdmiphy,
- [6] = &exynos5_clk_mout_mpll_user.clk,
- [7] = &exynos5_clk_mout_epll.clk,
- [8] = &exynos5_clk_sclk_vpll.clk,
- [9] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_group = {
- .sources = exynos5_clkset_group_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
-};
-
-/* Possible clock sources for aclk_266_gscl_sub Mux */
-static struct clk *clk_src_gscl_266_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &exynos5_clk_aclk_266.clk,
-};
-
-static struct clksrc_sources clk_src_gscl_266 = {
- .sources = clk_src_gscl_266_list,
- .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list),
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
- .clk = {
- .name = "ciu", /* card interface unit clock */
- .devname = "dw_mmc.0",
- .parent = &exynos5_clk_dout_mmc0.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.1",
- .parent = &exynos5_clk_dout_mmc1.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.2",
- .parent = &exynos5_clk_dout_mmc2.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.3",
- .parent = &exynos5_clk_dout_mmc3.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi0 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.0",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi1 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.1",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi2 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.2",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos5_clk_mdout_spi0.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos5_clk_mdout_spi1.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos5_clk_mdout_spi2.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos5-fb.1",
- .enable = exynos5_clksrc_mask_disp1_0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clksrcs[] = {
- {
- .clk = {
- .name = "aclk_266_gscl",
- },
- .sources = &clk_src_gscl_266,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
- }, {
- .clk = {
- .name = "sclk_g3d",
- .devname = "mali-t604.0",
- .enable = exynos5_clk_block_ctrl,
- .ctrlbit = (1 << 1),
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .devname = "exynos5-sata",
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_gscl_wrap",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_gscl_wrap",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_jpeg",
- .parent = &exynos5_clk_mout_cpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
- },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos5_sysclks[] = {
- &exynos5_clk_mout_apll,
- &exynos5_clk_sclk_apll,
- &exynos5_clk_mout_bpll,
- &exynos5_clk_mout_bpll_fout,
- &exynos5_clk_mout_bpll_user,
- &exynos5_clk_mout_cpll,
- &exynos5_clk_mout_epll,
- &exynos5_clk_mout_mpll,
- &exynos5_clk_mout_mpll_fout,
- &exynos5_clk_mout_mpll_user,
- &exynos5_clk_vpllsrc,
- &exynos5_clk_sclk_vpll,
- &exynos5_clk_mout_cpu,
- &exynos5_clk_dout_armclk,
- &exynos5_clk_dout_arm2clk,
- &exynos5_clk_cdrex,
- &exynos5_clk_aclk_400,
- &exynos5_clk_aclk_333,
- &exynos5_clk_aclk_266,
- &exynos5_clk_aclk_200,
- &exynos5_clk_aclk_166,
- &exynos5_clk_aclk_300_gscl,
- &exynos5_clk_mout_aclk_300_gscl,
- &exynos5_clk_mout_aclk_300_gscl_mid,
- &exynos5_clk_mout_aclk_300_gscl_mid1,
- &exynos5_clk_aclk_66_pre,
- &exynos5_clk_aclk_66,
- &exynos5_clk_dout_mmc0,
- &exynos5_clk_dout_mmc1,
- &exynos5_clk_dout_mmc2,
- &exynos5_clk_dout_mmc3,
- &exynos5_clk_dout_mmc4,
- &exynos5_clk_aclk_acp,
- &exynos5_clk_pclk_acp,
- &exynos5_clk_sclk_spi0,
- &exynos5_clk_sclk_spi1,
- &exynos5_clk_sclk_spi2,
- &exynos5_clk_mdout_spi0,
- &exynos5_clk_mdout_spi1,
- &exynos5_clk_mdout_spi2,
- &exynos5_clk_sclk_fimd1,
-};
-
-static struct clk *exynos5_clk_cdev[] = {
- &exynos5_clk_pdma0,
- &exynos5_clk_pdma1,
- &exynos5_clk_mdma1,
- &exynos5_clk_fimd1,
-};
-
-static struct clksrc_clk *exynos5_clksrc_cdev[] = {
- &exynos5_clk_sclk_uart0,
- &exynos5_clk_sclk_uart1,
- &exynos5_clk_sclk_uart2,
- &exynos5_clk_sclk_uart3,
- &exynos5_clk_sclk_mmc0,
- &exynos5_clk_sclk_mmc1,
- &exynos5_clk_sclk_mmc2,
- &exynos5_clk_sclk_mmc3,
-};
-
-static struct clk_lookup exynos5_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
- CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
- CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
- CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
- CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
- CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
- CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
- CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
- CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
- CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
-};
-
-static unsigned long exynos5_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static struct clk *exynos5_clks[] __initdata = {
- &exynos5_clk_sclk_hdmi27m,
- &exynos5_clk_sclk_hdmiphy,
- &clk_fout_bpll,
- &clk_fout_bpll_div2,
- &clk_fout_cpll,
- &clk_fout_mpll_div2,
- &exynos5_clk_armclk,
-};
-
-static u32 epll_div[][6] = {
- { 192000000, 0, 48, 3, 1, 0 },
- { 180000000, 0, 45, 3, 1, 0 },
- { 73728000, 1, 73, 3, 3, 47710 },
- { 67737600, 1, 90, 4, 3, 20762 },
- { 49152000, 0, 49, 3, 3, 9961 },
- { 45158400, 0, 45, 3, 3, 10381 },
- { 180633600, 0, 45, 3, 1, 10381 },
-};
-
-static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
- unsigned int tmp;
- unsigned int epll_rate;
- unsigned int locktime;
- unsigned int lockcnt;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- if (clk->parent)
- epll_rate = clk_get_rate(clk->parent);
- else
- epll_rate = clk_ext_xtal_mux.rate;
-
- if (epll_rate != 24000000) {
- pr_err("Invalid Clock : recommended clock is 24MHz.\n");
- return -EINVAL;
- }
-
- epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
- epll_con &= ~(0x1 << 27 | \
- PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k = epll_div[i][5] << 0;
- epll_con |= epll_div[i][1] << 27;
- epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
- epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
- epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- epll_rate /= 1000000;
-
- /* 3000 max_cycls : specification data */
- locktime = 3000 / epll_rate * epll_div[i][3];
- lockcnt = locktime * 10000 / (10000 / epll_rate);
-
- __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
-
- __raw_writel(epll_con, EXYNOS5_EPLL_CON0);
- __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
-
- do {
- tmp = __raw_readl(EXYNOS5_EPLL_CON0);
- } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops exynos5_epll_ops = {
- .get_rate = exynos5_epll_get_rate,
- .set_rate = exynos5_epll_set_rate,
-};
-
-static int xtal_rate;
-
-static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
-{
- return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
-}
-
-static struct clk_ops exynos5_fout_apll_ops = {
- .get_rate = exynos5_fout_apll_get_rate,
-};
-
-#ifdef CONFIG_PM
-static int exynos5_clock_suspend(void)
-{
- s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-
- return 0;
-}
-
-static void exynos5_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-}
-#else
-#define exynos5_clock_suspend NULL
-#define exynos5_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos5_clock_syscore_ops = {
- .suspend = exynos5_clock_suspend,
- .resume = exynos5_clock_resume,
-};
-
-void __init_or_cpufreq exynos5_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll;
- unsigned long bpll;
- unsigned long cpll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long mout_cdrex;
- unsigned long aclk_400;
- unsigned long aclk_333;
- unsigned long aclk_266;
- unsigned long aclk_200;
- unsigned long aclk_166;
- unsigned long aclk_66;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
- bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
- cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
- __raw_readl(EXYNOS5_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
- __raw_readl(EXYNOS5_VPLL_CON1));
-
- clk_fout_apll.ops = &exynos5_fout_apll_ops;
- clk_fout_bpll.rate = bpll;
- clk_fout_bpll_div2.rate = bpll >> 1;
- clk_fout_cpll.rate = cpll;
- clk_fout_mpll.rate = mpll;
- clk_fout_mpll_div2.rate = mpll >> 1;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
- "M=%ld, E=%ld V=%ld",
- apll, bpll, cpll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&exynos5_clk_armclk);
- mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
-
- aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
- aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
- aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
- aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
- aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
- aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
-
- printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
- "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
- "ACLK166=%ld, ACLK66=%ld\n",
- armclk, mout_cdrex, aclk_400,
- aclk_333, aclk_266, aclk_200,
- aclk_166, aclk_66);
-
-
- clk_fout_epll.ops = &exynos5_epll_ops;
-
- if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
- printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
- clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
-
- clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
- clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
-
- clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
- clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
- s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
-}
-
-void __init exynos5_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
- s3c_register_clksrc(exynos5_sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
- s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
- s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
- s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
-
- s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
- s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
-
- s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
- s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
- clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
-
- register_syscore_ops(&exynos5_clock_syscore_ops);
- s3c_pwmclk_init();
-}
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/proc-fns.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/sdhci.h>
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static void exynos5440_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
+unsigned long xxti_f = 0, xusbxti_f = 0;
+
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
.idcode = EXYNOS4212_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
.idcode = EXYNOS4412_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
.idcode = EXYNOS5250_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
- .init_clocks = exynos5_init_clocks,
.init = exynos_init,
.name = name_exynos5250,
}, {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
.length = SZ_4K,
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
-static void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
static void __init exynos5440_map_io(void)
{
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
-static void __init exynos5_init_clocks(int xtal)
+void __init exynos_init_time(void)
{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- /* EXYNOS5440 can support only common clock framework */
-
- if (soc_is_exynos5440())
- return;
-
-#ifdef CONFIG_SOC_EXYNOS5250
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- exynos5_register_clocks();
- exynos5_setup_clocks();
+ if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
+ of_clk_init(NULL);
+ clocksource_of_init();
#endif
+ } else {
+ /* todo: remove after migrating legacy E4 platforms to dt */
+#ifdef CONFIG_ARCH_EXYNOS4
+ exynos4_clk_init(NULL);
+ exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
+#endif
+ mct_init();
+ }
}
void __init exynos4_init_irq(void)
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
-extern void exynos4_timer_init(void);
+#include <linux/of.h>
+
+extern void mct_init(void);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos5_restart(char mode, const char *cmd);
void exynos_init_late(void);
+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
/* For EXYNOS4 and EXYNOS5 */
-#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
-
#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
/* For EXYNOS4 SoCs */
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
-#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
-#define EXYNOS5_PA_SYSTIMER 0x101C0000
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS5_PA_WATCHDOG 0x101D0000
#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
-/* For EXYNOS5250 */
-
-#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000)
-#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
-#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
-#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400)
-#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
-#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604)
-
-#define EXYNOS5_PWR_CTRL1 EXYNOS_CLKREG(0x01020)
-#define EXYNOS5_PWR_CTRL2 EXYNOS_CLKREG(0x01024)
-
-#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
-#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)
-
-#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900)
-
-#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500)
-
-#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130)
-#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134)
-#define EXYNOS5_EPLL_CON2 EXYNOS_CLKREG(0x10138)
-#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140)
-#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144)
-#define EXYNOS5_VPLL_CON2 EXYNOS_CLKREG(0x10148)
-#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120)
-
-#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210)
-#define EXYNOS5_CLKSRC_TOP1 EXYNOS_CLKREG(0x10214)
-#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218)
-#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C)
-#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220)
-#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
-#define EXYNOS5_CLKSRC_MAUDIO EXYNOS_CLKREG(0x10240)
-#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
-#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
-#define EXYNOS5_CLKSRC_PERIC1 EXYNOS_CLKREG(0x10254)
-#define EXYNOS5_SCLK_SRC_ISP EXYNOS_CLKREG(0x10270)
-
-#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
-#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
-#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
-#define EXYNOS5_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x10334)
-#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
-#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
-#define EXYNOS5_CLKSRC_MASK_PERIC1 EXYNOS_CLKREG(0x10354)
-
-#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
-#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
-#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520)
-#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C)
-#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C)
-#define EXYNOS5_CLKDIV_MAUDIO EXYNOS_CLKREG(0x10544)
-#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548)
-#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C)
-#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
-#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
-#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
-#define EXYNOS5_CLKDIV_PERIC1 EXYNOS_CLKREG(0x1055C)
-#define EXYNOS5_CLKDIV_PERIC2 EXYNOS_CLKREG(0x10560)
-#define EXYNOS5_CLKDIV_PERIC3 EXYNOS_CLKREG(0x10564)
-#define EXYNOS5_CLKDIV_PERIC4 EXYNOS_CLKREG(0x10568)
-#define EXYNOS5_CLKDIV_PERIC5 EXYNOS_CLKREG(0x1056C)
-#define EXYNOS5_SCLK_DIV_ISP EXYNOS_CLKREG(0x10580)
-
-#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
-#define EXYNOS5_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x0C800)
-#define EXYNOS5_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x0C804)
-#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
-#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
-#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
-#define EXYNOS5_CLKGATE_IP_G3D EXYNOS_CLKREG(0x10930)
-#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934)
-#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944)
-#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C)
-#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950)
-#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960)
-#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980)
-
-#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110)
-#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
-#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
-
-#define EXYNOS5_PLL_DIV2_SEL EXYNOS_CLKREG(0x20A24)
-
-#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
-
-#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
-
-#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
-#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
-#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
-#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8)
-#define PWR_CTRL1_USE_CORE1_WFE (1 << 5)
-#define PWR_CTRL1_USE_CORE0_WFE (1 << 4)
-#define PWR_CTRL1_USE_CORE1_WFI (1 << 1)
-#define PWR_CTRL1_USE_CORE0_WFI (1 << 0)
-
-#define PWR_CTRL2_DIV2_UP_EN (1 << 25)
-#define PWR_CTRL2_DIV1_UP_EN (1 << 24)
-#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16)
-#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8)
-#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4)
-#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0)
-
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
+++ /dev/null
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK (0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET (0x00)
-#define MCT_L_ICNTB_OFFSET (0x08)
-#define MCT_L_TCON_OFFSET (0x20)
-#define MCT_L_INT_CSTAT_OFFSET (0x30)
-#define MCT_L_INT_ENB_OFFSET (0x34)
-#define MCT_L_WSTAT_OFFSET (0x40)
-
-#define MCT_G_TCON_START (1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
-#define MCT_L_TCON_INT_START (1 << 1)
-#define MCT_L_TCON_TIMER_START (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
static void __init armlex4210_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
}
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
MACHINE_END
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
+#include <plat/mfc.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
- "exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
- "exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
- "exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
- "exynos4210-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
- "exynos4-sdhci.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
- "exynos4-sdhci.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
- "exynos4-sdhci.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
- "exynos4-sdhci.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
- "s3c2440-i2c.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
- "s3c2440-i2c.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
- "s3c2440-i2c.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
- "s3c2440-i2c.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
- "s3c2440-i2c.4", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
- "s3c2440-i2c.5", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
- "s3c2440-i2c.6", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
- "s3c2440-i2c.7", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
- "exynos4210-spi.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
- "exynos4210-spi.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
- "exynos4210-spi.2", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
- "exynos-tmu", NULL),
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000,
- "exynos-sysmmu.0", NULL), /* MFC_L */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000,
- "exynos-sysmmu.1", NULL), /* MFC_R */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000,
- "exynos-sysmmu.2", NULL), /* TV */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000,
- "exynos-sysmmu.3", NULL), /* JPEG */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000,
- "exynos-sysmmu.4", NULL), /* ROTATOR */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000,
- "exynos-sysmmu.5", NULL), /* FIMC0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000,
- "exynos-sysmmu.6", NULL), /* FIMC1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000,
- "exynos-sysmmu.7", NULL), /* FIMC2 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000,
- "exynos-sysmmu.8", NULL), /* FIMC3 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000,
- "exynos-sysmmu.9", NULL), /* G2D(4210) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000,
- "exynos-sysmmu.9", NULL), /* G2D(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000,
- "exynos-sysmmu.10", NULL), /* FIMD0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000,
- "exynos-sysmmu.11", NULL), /* FIMD1(4210) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000,
- "exynos-sysmmu.12", NULL), /* IS0(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000,
- "exynos-sysmmu.13", NULL), /* IS1(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000,
- "exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
- "exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
- {},
-};
-
static void __init exynos4_dt_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
}
static void __init exynos4_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos4_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos4_dt_compat[] __initdata = {
NULL
};
+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+ struct s5p_mfc_dt_meminfo mfc_mem;
+
+ /* Reserve memory for MFC only if it's available */
+ mfc_mem.compatible = "samsung,mfc-v5";
+ if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+ s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+ mfc_mem.lsize);
+#endif
+}
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos4_dt_map_io,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
+ .reserve = exynos4_reserve,
MACHINE_END
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/serial_core.h>
#include <linux/memblock.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <plat/mfc.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
- "exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
- "exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
- "exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
- "exynos4210-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
- "s3c2440-i2c.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
- "s3c2440-i2c.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
- "s3c2440-i2c.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
- "s3c2440-i2c.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
- "s3c2440-i2c.4", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
- "s3c2440-i2c.5", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
- "s3c2440-i2c.6", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
- "s3c2440-i2c.7", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
- "s3c2440-hdmiphy-i2c", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
- "dw_mmc.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
- "dw_mmc.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
- "dw_mmc.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
- "dw_mmc.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
- "exynos4210-spi.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
- "exynos4210-spi.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
- "exynos4210-spi.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
- "exynos5-sata", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
- "exynos5-sata-phy", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
- "exynos5-sata-phy-i2c", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
- "exynos-gsc.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
- "exynos-gsc.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
- "exynos-gsc.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
- "exynos-gsc.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
- "exynos5-hdmi", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
- "exynos5-mixer", NULL),
- OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
- "exynos-tmu", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
- "samsung-i2s.0", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
- "samsung-i2s.1", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
- "samsung-i2s.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000,
- "exynos-sysmmu.0", "mfc"), /* MFC_L */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000,
- "exynos-sysmmu.1", "mfc"), /* MFC_R */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000,
- "exynos-sysmmu.2", NULL), /* TV */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000,
- "exynos-sysmmu.3", "jpeg"), /* JPEG */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000,
- "exynos-sysmmu.4", NULL), /* ROTATOR */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000,
- "exynos-sysmmu.5", "gscl"), /* GSCL0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000,
- "exynos-sysmmu.6", "gscl"), /* GSCL1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000,
- "exynos-sysmmu.7", "gscl"), /* GSCL2 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000,
- "exynos-sysmmu.8", "gscl"), /* GSCL3 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000,
- "exynos-sysmmu.9", NULL), /* FIMC-IS0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000,
- "exynos-sysmmu.10", NULL), /* FIMC-IS1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000,
- "exynos-sysmmu.11", NULL), /* FIMD1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000,
- "exynos-sysmmu.12", NULL), /* FIMC-LITE0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000,
- "exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
- "exynos-sysmmu.14", NULL), /* G2D */
- {},
-};
-
-static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
- "exynos4210-uart.0", NULL),
- {},
-};
-
static void __init exynos5_dt_map_io(void)
{
- unsigned long root = of_get_flat_dt_root();
-
exynos_init_io(NULL, 0);
-
- if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
- s3c24xx_init_clocks(24000000);
}
static void __init exynos5_dt_machine_init(void)
}
}
- if (of_machine_is_compatible("samsung,exynos5250"))
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5250_auxdata_lookup, NULL);
- else if (of_machine_is_compatible("samsung,exynos5440"))
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5440_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos5_dt_compat[] __initdata = {
.map_io = exynos5_dt_map_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
static void __init nuri_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void __init nuri_reserve(void)
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void __init origen_power_init(void)
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
static void __init smdk4x12_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+ xxti_f = 12000000;
+ xusbxti_f = 24000000;
}
static void __init smdkv310_reserve(void)
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/camport.h>
#include <mach/map.h>
static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void s5p_tv_setup(void)
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/cache-l2x0.h>
sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
- twd_local_timer_of_register();
-
arch_timer_of_register();
arch_timer_sched_clock_init();
+
+ clocksource_of_init();
}
static void highbank_power_off(void)
busy->mux.reg = reg;
busy->mux.shift = shift;
- busy->mux.width = width;
+ busy->mux.mask = BIT(width) - 1;
busy->mux.lock = &imx_ccm_lock;
busy->mux_ops = &clk_mux_ops;
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/clocksource.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/regmap.h>
#include <linux/micrel_phy.h>
#include <linux/mfd/syscon.h>
-#include <asm/smp_twd.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
#include <asm/system_misc.h>
#include "common.h"
static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
- twd_local_timer_of_register();
+ clocksource_of_init();
imx_print_silicon_rev("i.MX6Q", imx6q_revision());
}
-# Common support
-obj-y := icoll.o ocotp.o system.o timer.o mm.o
-
obj-$(CONFIG_PM) += pm.o
-
obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_COMMON_H__
-#define __MACH_MXS_COMMON_H__
-
-extern const u32 *mxs_get_ocotp(void);
-extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(void);
-extern void mxs_restart(char, const char *);
-extern int mxs_saif_clkmux_select(unsigned int clkmux);
-
-extern int mx23_clocks_init(void);
-extern void mx23_map_io(void);
-
-extern int mx28_clocks_init(void);
-extern void mx28_map_io(void);
-
-extern void icoll_init_irq(void);
-extern void icoll_handle_irq(struct pt_regs *);
-
-#endif /* __MACH_MXS_COMMON_H__ */
*
*/
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
#ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR MX23_DUART_BASE_ADDR
+#define UART_PADDR 0x80070000
#elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR MX28_DUART_BASE_ADDR
+#define UART_PADDR 0x80074000
#endif
-#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
+#define UART_VADDR 0xfe100000
.macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_DIGCTL_H__
-#define __MACH_DIGCTL_H__
-
-/* MXS DIGCTL SAIF CLKMUX */
-#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
-#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
-
-#define HW_DIGCTL_CTRL 0x0
-#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10
-#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10)
-#define HW_DIGCTL_CHIPID 0x310
-#endif
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_HARDWARE_H__
-#define __MACH_MXS_HARDWARE_H__
-
-#endif /* __MACH_MXS_HARDWARE_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX23_H__
-#define __MACH_MX23_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX23_OCRAM_BASE_ADDR 0x00000000
-#define MX23_OCRAM_SIZE SZ_32K
-
-/*
- * IO
- */
-#define MX23_IO_BASE_ADDR 0x80000000
-#define MX23_IO_SIZE SZ_1M
-
-#define MX23_ICOLL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x000000)
-#define MX23_APBH_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x004000)
-#define MX23_BCH_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00a000)
-#define MX23_GPMI_BASE_ADDR (MX23_IO_BASE_ADDR + 0x00c000)
-#define MX23_SSP1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x010000)
-#define MX23_PINCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x018000)
-#define MX23_DIGCTL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x01c000)
-#define MX23_ETM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x020000)
-#define MX23_APBX_DMA_BASE_ADDR (MX23_IO_BASE_ADDR + 0x024000)
-#define MX23_DCP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x028000)
-#define MX23_PXP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02a000)
-#define MX23_OCOTP_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02c000)
-#define MX23_AXI_AHB0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x02e000)
-#define MX23_LCDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x030000)
-#define MX23_SSP2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x034000)
-#define MX23_TVENC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x038000)
-#define MX23_CLKCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x040000)
-#define MX23_SAIF0_BASE_ADDR (MX23_IO_BASE_ADDR + 0x042000)
-#define MX23_POWER_BASE_ADDR (MX23_IO_BASE_ADDR + 0x044000)
-#define MX23_SAIF1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x046000)
-#define MX23_AUDIOOUT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x048000)
-#define MX23_AUDIOIN_BASE_ADDR (MX23_IO_BASE_ADDR + 0x04c000)
-#define MX23_LRADC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x050000)
-#define MX23_SPDIF_BASE_ADDR (MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C_BASE_ADDR (MX23_IO_BASE_ADDR + 0x058000)
-#define MX23_RTC_BASE_ADDR (MX23_IO_BASE_ADDR + 0x05c000)
-#define MX23_PWM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x064000)
-#define MX23_TIMROT_BASE_ADDR (MX23_IO_BASE_ADDR + 0x068000)
-#define MX23_AUART1_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06c000)
-#define MX23_AUART2_BASE_ADDR (MX23_IO_BASE_ADDR + 0x06e000)
-#define MX23_DUART_BASE_ADDR (MX23_IO_BASE_ADDR + 0x070000)
-#define MX23_USBPHY_BASE_ADDR (MX23_IO_BASE_ADDR + 0x07c000)
-#define MX23_USBCTRL_BASE_ADDR (MX23_IO_BASE_ADDR + 0x080000)
-#define MX23_DRAM_BASE_ADDR (MX23_IO_BASE_ADDR + 0x0e0000)
-
-#define MX23_IO_P2V(x) MXS_IO_P2V(x)
-#define MX23_IO_ADDRESS(x) IOMEM(MX23_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX23_INT_DUART 0
-#define MX23_INT_COMMS_RX 1
-#define MX23_INT_COMMS_TX 1
-#define MX23_INT_SSP2_ERROR 2
-#define MX23_INT_VDD5V 3
-#define MX23_INT_HEADPHONE_SHORT 4
-#define MX23_INT_DAC_DMA 5
-#define MX23_INT_DAC_ERROR 6
-#define MX23_INT_ADC_DMA 7
-#define MX23_INT_ADC_ERROR 8
-#define MX23_INT_SPDIF_DMA 9
-#define MX23_INT_SAIF2_DMA 9
-#define MX23_INT_SPDIF_ERROR 10
-#define MX23_INT_SAIF1_IRQ 10
-#define MX23_INT_SAIF2_IRQ 10
-#define MX23_INT_USB_CTRL 11
-#define MX23_INT_USB_WAKEUP 12
-#define MX23_INT_GPMI_DMA 13
-#define MX23_INT_SSP1_DMA 14
-#define MX23_INT_SSP1_ERROR 15
-#define MX23_INT_GPIO0 16
-#define MX23_INT_GPIO1 17
-#define MX23_INT_GPIO2 18
-#define MX23_INT_SAIF1_DMA 19
-#define MX23_INT_SSP2_DMA 20
-#define MX23_INT_ECC8_IRQ 21
-#define MX23_INT_RTC_ALARM 22
-#define MX23_INT_AUART1_TX_DMA 23
-#define MX23_INT_AUART1 24
-#define MX23_INT_AUART1_RX_DMA 25
-#define MX23_INT_I2C_DMA 26
-#define MX23_INT_I2C_ERROR 27
-#define MX23_INT_TIMER0 28
-#define MX23_INT_TIMER1 29
-#define MX23_INT_TIMER2 30
-#define MX23_INT_TIMER3 31
-#define MX23_INT_BATT_BRNOUT 32
-#define MX23_INT_VDDD_BRNOUT 33
-#define MX23_INT_VDDIO_BRNOUT 34
-#define MX23_INT_VDD18_BRNOUT 35
-#define MX23_INT_TOUCH_DETECT 36
-#define MX23_INT_LRADC_CH0 37
-#define MX23_INT_LRADC_CH1 38
-#define MX23_INT_LRADC_CH2 39
-#define MX23_INT_LRADC_CH3 40
-#define MX23_INT_LRADC_CH4 41
-#define MX23_INT_LRADC_CH5 42
-#define MX23_INT_LRADC_CH6 43
-#define MX23_INT_LRADC_CH7 44
-#define MX23_INT_LCDIF_DMA 45
-#define MX23_INT_LCDIF_ERROR 46
-#define MX23_INT_DIGCTL_DEBUG_TRAP 47
-#define MX23_INT_RTC_1MSEC 48
-#define MX23_INT_DRI_DMA 49
-#define MX23_INT_DRI_ATTENTION 50
-#define MX23_INT_GPMI_ATTENTION 51
-#define MX23_INT_IR 52
-#define MX23_INT_DCP_VMI 53
-#define MX23_INT_DCP 54
-#define MX23_INT_BCH 56
-#define MX23_INT_PXP 57
-#define MX23_INT_AUART2_TX_DMA 58
-#define MX23_INT_AUART2 59
-#define MX23_INT_AUART2_RX_DMA 60
-#define MX23_INT_VDAC_DETECT 61
-#define MX23_INT_VDD5V_DROOP 64
-#define MX23_INT_DCDC4P2_BO 65
-
-/*
- * APBH DMA
- */
-#define MX23_DMA_SSP1 1
-#define MX23_DMA_SSP2 2
-#define MX23_DMA_GPMI0 4
-#define MX23_DMA_GPMI1 5
-#define MX23_DMA_GPMI2 6
-#define MX23_DMA_GPMI3 7
-
-/*
- * APBX DMA
- */
-#define MX23_DMA_ADC 0
-#define MX23_DMA_DAC 1
-#define MX23_DMA_SPDIF 2
-#define MX23_DMA_I2C 3
-#define MX23_DMA_SAIF0 4
-#define MX23_DMA_UART0_RX 6
-#define MX23_DMA_UART0_TX 7
-#define MX23_DMA_UART1_RX 8
-#define MX23_DMA_UART1_TX 9
-#define MX23_DMA_SAIF1 10
-
-#endif /* __MACH_MX23_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX28_H__
-#define __MACH_MX28_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX28_OCRAM_BASE_ADDR 0x00000000
-#define MX28_OCRAM_SIZE SZ_128K
-
-/*
- * IO
- */
-#define MX28_IO_BASE_ADDR 0x80000000
-#define MX28_IO_SIZE SZ_1M
-
-#define MX28_ICOLL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x000000)
-#define MX28_HSADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x002000)
-#define MX28_APBH_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x004000)
-#define MX28_PERFMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x006000)
-#define MX28_BCH_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00a000)
-#define MX28_GPMI_BASE_ADDR (MX28_IO_BASE_ADDR + 0x00c000)
-#define MX28_SSP0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x010000)
-#define MX28_SSP1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x012000)
-#define MX28_SSP2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x014000)
-#define MX28_SSP3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x016000)
-#define MX28_PINCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x018000)
-#define MX28_DIGCTL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x01c000)
-#define MX28_ETM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x022000)
-#define MX28_APBX_DMA_BASE_ADDR (MX28_IO_BASE_ADDR + 0x024000)
-#define MX28_DCP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x028000)
-#define MX28_PXP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02a000)
-#define MX28_OCOTP_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02c000)
-#define MX28_AXI_AHB0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x02e000)
-#define MX28_LCDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x030000)
-#define MX28_CAN0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x032000)
-#define MX28_CAN1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x034000)
-#define MX28_SIMDBG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c000)
-#define MX28_SIMGPMISEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c200)
-#define MX28_SIMSSPSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c300)
-#define MX28_SIMMEMSEL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c400)
-#define MX28_GPIOMON_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c500)
-#define MX28_SIMENET_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c700)
-#define MX28_ARMJTAG_BASE_ADDR (MX28_IO_BASE_ADDR + 0x03c800)
-#define MX28_CLKCTRL_BASE_ADDR (MX28_IO_BASE_ADDR + 0x040000)
-#define MX28_SAIF0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x042000)
-#define MX28_POWER_BASE_ADDR (MX28_IO_BASE_ADDR + 0x044000)
-#define MX28_SAIF1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x046000)
-#define MX28_LRADC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x050000)
-#define MX28_SPDIF_BASE_ADDR (MX28_IO_BASE_ADDR + 0x054000)
-#define MX28_RTC_BASE_ADDR (MX28_IO_BASE_ADDR + 0x056000)
-#define MX28_I2C0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x058000)
-#define MX28_I2C1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x05a000)
-#define MX28_PWM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x064000)
-#define MX28_TIMROT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x068000)
-#define MX28_AUART0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06a000)
-#define MX28_AUART1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06c000)
-#define MX28_AUART2_BASE_ADDR (MX28_IO_BASE_ADDR + 0x06e000)
-#define MX28_AUART3_BASE_ADDR (MX28_IO_BASE_ADDR + 0x070000)
-#define MX28_AUART4_BASE_ADDR (MX28_IO_BASE_ADDR + 0x072000)
-#define MX28_DUART_BASE_ADDR (MX28_IO_BASE_ADDR + 0x074000)
-#define MX28_USBPHY0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07C000)
-#define MX28_USBPHY1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x07e000)
-#define MX28_USBCTRL0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x080000)
-#define MX28_USBCTRL1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x090000)
-#define MX28_DFLPT_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0c0000)
-#define MX28_DRAM_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0e0000)
-#define MX28_ENET_MAC0_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f0000)
-#define MX28_ENET_MAC1_BASE_ADDR (MX28_IO_BASE_ADDR + 0x0f4000)
-
-#define MX28_IO_P2V(x) MXS_IO_P2V(x)
-#define MX28_IO_ADDRESS(x) IOMEM(MX28_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX28_INT_BATT_BRNOUT 0
-#define MX28_INT_VDDD_BRNOUT 1
-#define MX28_INT_VDDIO_BRNOUT 2
-#define MX28_INT_VDDA_BRNOUT 3
-#define MX28_INT_VDD5V_DROOP 4
-#define MX28_INT_DCDC4P2_BRNOUT 5
-#define MX28_INT_VDD5V 6
-#define MX28_INT_CAN0 8
-#define MX28_INT_CAN1 9
-#define MX28_INT_LRADC_TOUCH 10
-#define MX28_INT_HSADC 13
-#define MX28_INT_LRADC_THRESH0 14
-#define MX28_INT_LRADC_THRESH1 15
-#define MX28_INT_LRADC_CH0 16
-#define MX28_INT_LRADC_CH1 17
-#define MX28_INT_LRADC_CH2 18
-#define MX28_INT_LRADC_CH3 19
-#define MX28_INT_LRADC_CH4 20
-#define MX28_INT_LRADC_CH5 21
-#define MX28_INT_LRADC_CH6 22
-#define MX28_INT_LRADC_CH7 23
-#define MX28_INT_LRADC_BUTTON0 24
-#define MX28_INT_LRADC_BUTTON1 25
-#define MX28_INT_PERFMON 27
-#define MX28_INT_RTC_1MSEC 28
-#define MX28_INT_RTC_ALARM 29
-#define MX28_INT_COMMS 31
-#define MX28_INT_EMI_ERR 32
-#define MX28_INT_LCDIF 38
-#define MX28_INT_PXP 39
-#define MX28_INT_BCH 41
-#define MX28_INT_GPMI 42
-#define MX28_INT_SPDIF_ERROR 45
-#define MX28_INT_DUART 47
-#define MX28_INT_TIMER0 48
-#define MX28_INT_TIMER1 49
-#define MX28_INT_TIMER2 50
-#define MX28_INT_TIMER3 51
-#define MX28_INT_DCP_VMI 52
-#define MX28_INT_DCP 53
-#define MX28_INT_DCP_SECURE 54
-#define MX28_INT_SAIF1 58
-#define MX28_INT_SAIF0 59
-#define MX28_INT_SPDIF_DMA 66
-#define MX28_INT_I2C0_DMA 68
-#define MX28_INT_I2C1_DMA 69
-#define MX28_INT_AUART0_RX_DMA 70
-#define MX28_INT_AUART0_TX_DMA 71
-#define MX28_INT_AUART1_RX_DMA 72
-#define MX28_INT_AUART1_TX_DMA 73
-#define MX28_INT_AUART2_RX_DMA 74
-#define MX28_INT_AUART2_TX_DMA 75
-#define MX28_INT_AUART3_RX_DMA 76
-#define MX28_INT_AUART3_TX_DMA 77
-#define MX28_INT_AUART4_RX_DMA 78
-#define MX28_INT_AUART4_TX_DMA 79
-#define MX28_INT_SAIF0_DMA 80
-#define MX28_INT_SAIF1_DMA 81
-#define MX28_INT_SSP0_DMA 82
-#define MX28_INT_SSP1_DMA 83
-#define MX28_INT_SSP2_DMA 84
-#define MX28_INT_SSP3_DMA 85
-#define MX28_INT_LCDIF_DMA 86
-#define MX28_INT_HSADC_DMA 87
-#define MX28_INT_GPMI_DMA 88
-#define MX28_INT_DIGCTL_DEBUG_TRAP 89
-#define MX28_INT_USB1 92
-#define MX28_INT_USB0 93
-#define MX28_INT_USB1_WAKEUP 94
-#define MX28_INT_USB0_WAKEUP 95
-#define MX28_INT_SSP0_ERROR 96
-#define MX28_INT_SSP1_ERROR 97
-#define MX28_INT_SSP2_ERROR 98
-#define MX28_INT_SSP3_ERROR 99
-#define MX28_INT_ENET_SWI 100
-#define MX28_INT_ENET_MAC0 101
-#define MX28_INT_ENET_MAC1 102
-#define MX28_INT_ENET_MAC0_1588 103
-#define MX28_INT_ENET_MAC1_1588 104
-#define MX28_INT_I2C1_ERROR 110
-#define MX28_INT_I2C0_ERROR 111
-#define MX28_INT_AUART0 112
-#define MX28_INT_AUART1 113
-#define MX28_INT_AUART2 114
-#define MX28_INT_AUART3 115
-#define MX28_INT_AUART4 116
-#define MX28_INT_GPIO4 123
-#define MX28_INT_GPIO3 124
-#define MX28_INT_GPIO2 125
-#define MX28_INT_GPIO1 126
-#define MX28_INT_GPIO0 127
-
-/*
- * APBH DMA
- */
-#define MX28_DMA_SSP0 0
-#define MX28_DMA_SSP1 1
-#define MX28_DMA_SSP2 2
-#define MX28_DMA_SSP3 3
-#define MX28_DMA_GPMI0 4
-#define MX28_DMA_GPMI1 5
-#define MX28_DMA_GPMI2 6
-#define MX28_DMA_GPMI3 7
-#define MX28_DMA_GPMI4 8
-#define MX28_DMA_GPMI5 9
-#define MX28_DMA_GPMI6 10
-#define MX28_DMA_GPMI7 11
-#define MX28_DMA_HSADC 12
-#define MX28_DMA_LCDIF 13
-
-/*
- * APBX DMA
- */
-#define MX28_DMA_AUART4_RX 0
-#define MX28_DMA_AUART4_TX 1
-#define MX28_DMA_SPDIF_TX 2
-#define MX28_DMA_SAIF0 4
-#define MX28_DMA_SAIF1 5
-#define MX28_DMA_I2C0 6
-#define MX28_DMA_I2C1 7
-#define MX28_DMA_AUART0_RX 8
-#define MX28_DMA_AUART0_TX 9
-#define MX28_DMA_AUART1_RX 10
-#define MX28_DMA_AUART1_TX 11
-#define MX28_DMA_AUART2_RX 12
-#define MX28_DMA_AUART2_TX 13
-#define MX28_DMA_AUART3_RX 14
-#define MX28_DMA_AUART3_TX 15
-
-#endif /* __MACH_MX28_H__ */
+++ /dev/null
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_H__
-#define __MACH_MXS_H__
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/mach-types.h>
-#include <mach/digctl.h>
-#include <mach/hardware.h>
-
-/*
- * IO addresses common to MXS-based
- */
-#define MXS_IO_BASE_ADDR 0x80000000
-#define MXS_IO_SIZE SZ_1M
-
-#define MXS_ICOLL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x000000)
-#define MXS_APBH_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x004000)
-#define MXS_BCH_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00a000)
-#define MXS_GPMI_BASE_ADDR (MXS_IO_BASE_ADDR + 0x00c000)
-#define MXS_PINCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x018000)
-#define MXS_DIGCTL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x01c000)
-#define MXS_APBX_DMA_BASE_ADDR (MXS_IO_BASE_ADDR + 0x024000)
-#define MXS_DCP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x028000)
-#define MXS_PXP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02a000)
-#define MXS_OCOTP_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02c000)
-#define MXS_AXI_AHB0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x02e000)
-#define MXS_LCDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x030000)
-#define MXS_CLKCTRL_BASE_ADDR (MXS_IO_BASE_ADDR + 0x040000)
-#define MXS_SAIF0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x042000)
-#define MXS_POWER_BASE_ADDR (MXS_IO_BASE_ADDR + 0x044000)
-#define MXS_SAIF1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x046000)
-#define MXS_LRADC_BASE_ADDR (MXS_IO_BASE_ADDR + 0x050000)
-#define MXS_SPDIF_BASE_ADDR (MXS_IO_BASE_ADDR + 0x054000)
-#define MXS_I2C0_BASE_ADDR (MXS_IO_BASE_ADDR + 0x058000)
-#define MXS_PWM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x064000)
-#define MXS_TIMROT_BASE_ADDR (MXS_IO_BASE_ADDR + 0x068000)
-#define MXS_AUART1_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06c000)
-#define MXS_AUART2_BASE_ADDR (MXS_IO_BASE_ADDR + 0x06e000)
-#define MXS_DRAM_BASE_ADDR (MXS_IO_BASE_ADDR + 0x0e0000)
-
-/*
- * It maps the whole address space to [0xf4000000, 0xf50fffff].
- *
- * OCRAM 0x00000000+0x020000 -> 0xf4000000+0x020000
- * IO 0x80000000+0x100000 -> 0xf5000000+0x100000
- */
-#define MXS_IO_P2V(x) (0xf4000000 + \
- (((x) & 0x80000000) >> 7) + \
- (((x) & 0x000fffff)))
-
-#define MXS_IO_ADDRESS(x) IOMEM(MXS_IO_P2V(x))
-
-#define mxs_map_entry(soc, name, _type) { \
- .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
- .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
- .length = soc ## _ ## name ## _SIZE, \
- .type = _type, \
-}
-
-#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-
-#define MXS_SET_ADDR 0x4
-#define MXS_CLR_ADDR 0x8
-#define MXS_TOG_ADDR 0xc
-
-#ifndef __ASSEMBLER__
-static inline void __mxs_setl(u32 mask, void __iomem *reg)
-{
- __raw_writel(mask, reg + MXS_SET_ADDR);
-}
-
-static inline void __mxs_clrl(u32 mask, void __iomem *reg)
-{
- __raw_writel(mask, reg + MXS_CLR_ADDR);
-}
-
-static inline void __mxs_togl(u32 mask, void __iomem *reg)
-{
- __raw_writel(mask, reg + MXS_TOG_ADDR);
-}
-
-/*
- * MXS CPU types
- */
-#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
-
-static inline int cpu_is_mx23(void)
-{
- return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
-}
-
-static inline int cpu_is_mx28(void)
-{
- return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
-}
-#endif
-
-#endif /* __MACH_MXS_H__ */
*/
#include <linux/clk.h>
+#include <linux/clk/mxs.h>
#include <linux/clkdev.h>
+#include <linux/clocksource.h>
#include <linux/can/platform/flexcan.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mxs.h>
#include <linux/micrel_phy.h>
-#include <linux/mxsfb.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/mxs.h>
-
-static struct fb_videomode mx23evk_video_modes[] = {
- {
- .name = "Samsung-LMS430HF02",
- .refresh = 60,
- .xres = 480,
- .yres = 272,
- .pixclock = 108096, /* picosecond (9.2 MHz) */
- .left_margin = 15,
- .right_margin = 8,
- .upper_margin = 12,
- .lower_margin = 4,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
+#include <asm/system_misc.h>
-static struct fb_videomode mx28evk_video_modes[] = {
- {
- .name = "Seiko-43WVF1G",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
-static struct fb_videomode m28evk_video_modes[] = {
- {
- .name = "Ampire AM-800480R2TMQW-T01H",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 30066, /* picosecond (33.26 MHz) */
- .left_margin = 0,
- .right_margin = 256,
- .upper_margin = 0,
- .lower_margin = 45,
- .hsync_len = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
- },
-};
+#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-static struct fb_videomode apx4devkit_video_modes[] = {
- {
- .name = "HannStar PJ70112A",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 33333, /* picosecond (30.00 MHz) */
- .left_margin = 88,
- .right_margin = 40,
- .upper_margin = 32,
- .lower_margin = 13,
- .hsync_len = 48,
- .vsync_len = 3,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
+#define MXS_TOG_ADDR 0xc
-static struct fb_videomode apf28dev_video_modes[] = {
- {
- .name = "LW700",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 30303, /* picosecond */
- .left_margin = 96,
- .right_margin = 96, /* at least 3 & 1 */
- .upper_margin = 0x14,
- .lower_margin = 0x15,
- .hsync_len = 64,
- .vsync_len = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_DATA_ENABLE_HIGH_ACT |
- FB_SYNC_DOTCLK_FAILING_ACT,
- },
-};
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_SET_ADDR);
+}
-static struct fb_videomode cfa10049_video_modes[] = {
- {
- .name = "Himax HX8357-B",
- .refresh = 60,
- .xres = 320,
- .yres = 480,
- .pixclock = 108506, /* picosecond (9.216 MHz) */
- .left_margin = 2,
- .right_margin = 2,
- .upper_margin = 2,
- .lower_margin = 2,
- .hsync_len = 15,
- .vsync_len = 15,
- .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT
- },
-};
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_CLR_ADDR);
+}
-static struct mxsfb_platform_data mxsfb_pdata __initdata;
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+ __raw_writel(mask, reg + MXS_TOG_ADDR);
+}
/*
* MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
static struct flexcan_platform_data flexcan_pdata[2];
static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
- OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
{ /* sentinel */ }
};
-static void __init imx23_timer_init(void)
-{
- mx23_clocks_init();
-}
+#define OCOTP_WORD_OFFSET 0x20
+#define OCOTP_WORD_COUNT 0x20
+
+#define BM_OCOTP_CTRL_BUSY (1 << 8)
+#define BM_OCOTP_CTRL_ERROR (1 << 9)
+#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
+
+static DEFINE_MUTEX(ocotp_mutex);
+static u32 ocotp_words[OCOTP_WORD_COUNT];
-static void __init imx28_timer_init(void)
+static const u32 *mxs_get_ocotp(void)
{
- mx28_clocks_init();
+ struct device_node *np;
+ void __iomem *ocotp_base;
+ int timeout = 0x400;
+ size_t i;
+ static int once;
+
+ if (once)
+ return ocotp_words;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
+ ocotp_base = of_iomap(np, 0);
+ WARN_ON(!ocotp_base);
+
+ mutex_lock(&ocotp_mutex);
+
+ /*
+ * clk_enable(hbus_clk) for ocotp can be skipped
+ * as it must be on when system is running.
+ */
+
+ /* try to clear ERROR bit */
+ __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
+
+ /* check both BUSY and ERROR cleared */
+ while ((__raw_readl(ocotp_base) &
+ (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ goto error_unlock;
+
+ /* open OCOTP banks for read */
+ __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+ /* approximately wait 32 hclk cycles */
+ udelay(1);
+
+ /* poll BUSY bit becoming cleared */
+ timeout = 0x400;
+ while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ goto error_unlock;
+
+ for (i = 0; i < OCOTP_WORD_COUNT; i++)
+ ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
+ i * 0x10);
+
+ /* close banks for power saving */
+ __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+ once = 1;
+
+ mutex_unlock(&ocotp_mutex);
+
+ return ocotp_words;
+
+error_unlock:
+ mutex_unlock(&ocotp_mutex);
+ pr_err("%s: timeout in reading OCOTP\n", __func__);
+ return NULL;
}
enum mac_oui {
}
}
-static void __init imx23_evk_init(void)
-{
- mxsfb_pdata.mode_list = mx23evk_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
-}
-
static inline void enable_clk_enet_out(void)
{
struct clk *clk = clk_get_sys("enet_out", NULL);
static void __init imx28_evk_init(void)
{
- enable_clk_enet_out();
update_fec_mac_prop(OUI_FSL);
- mxsfb_pdata.mode_list = mx28evk_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
-
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
}
}
-static void __init m28evk_init(void)
-{
- mxsfb_pdata.mode_list = m28evk_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
- mxsfb_pdata.default_bpp = 16;
- mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
-}
-
-static void __init sc_sps1_init(void)
-{
- enable_clk_enet_out();
-}
-
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
if (IS_BUILTIN(CONFIG_PHYLIB))
phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
-
- mxsfb_pdata.mode_list = apx4devkit_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0)
static void __init cfa10049_init(void)
{
- enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
- mxsfb_pdata.mode_list = cfa10049_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init cfa10037_init(void)
{
- enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
}
-static void __init apf28_init(void)
-{
- enable_clk_enet_out();
-
- mxsfb_pdata.mode_list = apf28dev_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
- mxsfb_pdata.default_bpp = 16;
- mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
-}
-
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
- else if (of_machine_is_compatible("fsl,imx23-evk"))
- imx23_evk_init();
- else if (of_machine_is_compatible("denx,m28evk"))
- m28evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
else if (of_machine_is_compatible("crystalfontz,cfa10037"))
cfa10037_init();
else if (of_machine_is_compatible("crystalfontz,cfa10049"))
cfa10049_init();
- else if (of_machine_is_compatible("armadeus,imx28-apf28"))
- apf28_init();
- else if (of_machine_is_compatible("schulercontrol,imx28-sps1"))
- sc_sps1_init();
of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL);
imx28_evk_post_init();
}
-static const char *imx23_dt_compat[] __initdata = {
- "fsl,imx23",
- NULL,
-};
+#define MX23_CLKCTRL_RESET_OFFSET 0x120
+#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
+#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+static void mxs_restart(char mode, const char *cmd)
+{
+ struct device_node *np;
+ void __iomem *reset_addr;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+ reset_addr = of_iomap(np, 0);
+ if (!reset_addr)
+ goto soft;
+
+ if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+ reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+ else
+ reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+
+ /* reset the chip */
+ __mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
+
+ pr_err("Failed to assert the chip reset\n");
+
+ /* Delay to allow the serial port to show the message */
+ mdelay(50);
+
+soft:
+ /* We'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
-static const char *imx28_dt_compat[] __initdata = {
+static void __init mxs_timer_init(void)
+{
+ if (of_machine_is_compatible("fsl,imx23"))
+ mx23_clocks_init();
+ else
+ mx28_clocks_init();
+ clocksource_of_init();
+}
+
+static const char *mxs_dt_compat[] __initdata = {
"fsl,imx28",
+ "fsl,imx23",
NULL,
};
-DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
- .map_io = mx23_map_io,
- .init_irq = icoll_init_irq,
- .handle_irq = icoll_handle_irq,
- .init_time = imx23_timer_init,
- .init_machine = mxs_machine_init,
- .dt_compat = imx23_dt_compat,
- .restart = mxs_restart,
-MACHINE_END
-
-DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
- .map_io = mx28_map_io,
- .init_irq = icoll_init_irq,
+DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
+ .map_io = debug_ll_io_init,
+ .init_irq = irqchip_init,
.handle_irq = icoll_handle_irq,
- .init_time = imx28_timer_init,
+ .init_time = mxs_timer_init,
.init_machine = mxs_machine_init,
- .dt_compat = imx28_dt_compat,
+ .dt_compat = mxs_dt_compat,
.restart = mxs_restart,
MACHINE_END
+++ /dev/null
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/common.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
- mxs_map_entry(MX23, OCRAM, MT_DEVICE),
- mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
- mxs_map_entry(MX28, OCRAM, MT_DEVICE),
- mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
- iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx28_map_io(void)
-{
- iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}
+++ /dev/null
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-
-#include <asm/processor.h> /* for cpu_relax() */
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define OCOTP_WORD_OFFSET 0x20
-#define OCOTP_WORD_COUNT 0x20
-
-#define BM_OCOTP_CTRL_BUSY (1 << 8)
-#define BM_OCOTP_CTRL_ERROR (1 << 9)
-#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
-
-static DEFINE_MUTEX(ocotp_mutex);
-static u32 ocotp_words[OCOTP_WORD_COUNT];
-
-const u32 *mxs_get_ocotp(void)
-{
- void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
- int timeout = 0x400;
- size_t i;
- static int once = 0;
-
- if (once)
- return ocotp_words;
-
- mutex_lock(&ocotp_mutex);
-
- /*
- * clk_enable(hbus_clk) for ocotp can be skipped
- * as it must be on when system is running.
- */
-
- /* try to clear ERROR bit */
- __mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
-
- /* check both BUSY and ERROR cleared */
- while ((__raw_readl(ocotp_base) &
- (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- goto error_unlock;
-
- /* open OCOTP banks for read */
- __mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
- /* approximately wait 32 hclk cycles */
- udelay(1);
-
- /* poll BUSY bit becoming cleared */
- timeout = 0x400;
- while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- goto error_unlock;
-
- for (i = 0; i < OCOTP_WORD_COUNT; i++)
- ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
- i * 0x10);
-
- /* close banks for power saving */
- __mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
- once = 1;
-
- mutex_unlock(&ocotp_mutex);
-
- return ocotp_words;
-
-error_unlock:
- mutex_unlock(&ocotp_mutex);
- pr_err("%s: timeout in reading OCOTP\n", __func__);
- return NULL;
-}
+++ /dev/null
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define MX23_CLKCTRL_RESET_OFFSET 0x120
-#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
-#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
-
-#define MXS_MODULE_CLKGATE (1 << 30)
-#define MXS_MODULE_SFTRST (1 << 31)
-
-static void __iomem *mxs_clkctrl_reset_addr;
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void mxs_restart(char mode, const char *cmd)
-{
- /* reset the chip */
- __mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
-
- pr_err("Failed to assert the chip reset\n");
-
- /* Delay to allow the serial port to show the message */
- mdelay(50);
-
- /* We'll take a jump through zero as a poor second */
- soft_restart(0);
-}
-
-static int __init mxs_arch_reset_init(void)
-{
- struct clk *clk;
-
- mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
- (cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
- MX28_CLKCTRL_RESET_OFFSET);
-
- clk = clk_get_sys("rtc", NULL);
- if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-
- return 0;
-}
-core_initcall(mxs_arch_reset_init);
-
-/*
- * Clear the bit and poll it cleared. This is usually called with
- * a reset address and mask being either SFTRST(bit 31) or CLKGATE
- * (bit 30).
- */
-static int clear_poll_bit(void __iomem *addr, u32 mask)
-{
- int timeout = 0x400;
-
- /* clear the bit */
- __mxs_clrl(mask, addr);
-
- /*
- * SFTRST needs 3 GPMI clocks to settle, the reference manual
- * recommends to wait 1us.
- */
- udelay(1);
-
- /* poll the bit becoming clear */
- while ((__raw_readl(addr) & mask) && --timeout)
- /* nothing */;
-
- return !timeout;
-}
-
-int mxs_reset_block(void __iomem *reset_addr)
-{
- int ret;
- int timeout = 0x400;
-
- /* clear and poll SFTRST */
- ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
- if (unlikely(ret))
- goto error;
-
- /* clear CLKGATE */
- __mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
-
- /* set SFTRST to reset the block */
- __mxs_setl(MXS_MODULE_SFTRST, reset_addr);
- udelay(1);
-
- /* poll CLKGATE becoming set */
- while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
- /* nothing */;
- if (unlikely(!timeout))
- goto error;
-
- /* clear and poll SFTRST */
- ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
- if (unlikely(ret))
- goto error;
-
- /* clear and poll CLKGATE */
- ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
- if (unlikely(ret))
- goto error;
-
- return 0;
-
-error:
- pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
- return -ETIMEDOUT;
-}
-EXPORT_SYMBOL(mxs_reset_block);
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
-config MACH_OMAP_HTCWIZARD
- bool "HTC Wizard"
- depends on ARCH_OMAP850
- help
- HTC Wizard smartphone support (AKA QTEK 9100, ...)
-
config MACH_HERALD
bool "HTC Herald"
depends on ARCH_OMAP850
config OMAP4_ERRATA_I688
bool "OMAP4 errata: Async Bridge Corruption"
- depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM
+ depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back
omap_display_init(&sdp2430_dss_data);
}
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 5,
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
sdp3430_display_init();
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 126,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 126,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_USB_NRESET,
+ .vcc_gpio = GPIO_USB_POWER,
+ .vcc_polarity = 1,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = GPIO_USB_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
static struct mtd_partition crane_nand_partitions[] = {
return;
}
- ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
- "usb_ehci_enable");
- if (ret < 0) {
- pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
- return;
- }
-
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
#else
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
#endif
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
{} /* Terminator */
};
-
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
{} /* Terminator */
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
- .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
- .reset_gpio_port[2] = -EINVAL
};
static void __init cm_t35_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = HSUSB1_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = HSUSB2_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = HSUSB1_RESET_GPIO,
- .reset_gpio_port[1] = HSUSB2_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static int __init cm_t3517_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&cm_t3517_ehci_pdata);
return 0;
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
+ "timll,omap3-devkit8000",
NULL,
};
return 0;
}
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 1,
omap3_pmic_init("twl4030", &igep_twldata);
}
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = IGEP2_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = IGEP3_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL,
};
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_init_smsc911x();
+ usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
+ usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
static struct gpio_led gpio_leds[];
+/* PHY's VCC regulator might be added later, so flag that we need it */
+static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
+ .needs_vcc = true,
+};
+
+static struct usbhs_phy_data phy_data[] = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
+ .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
+ .platform_data = &hsusb2_phy_data,
+ },
+};
+
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
}
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
- "nEN_USB_PWR");
+ /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
+ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
+ phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
return 0;
}
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
usbhs_init(&usbhs_bdata);
+
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
REGULATOR_SUPPLY("vaux2", NULL),
};
return 0;
}
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = -1, /* set at runtime */
+ .vcc_gpio = -EINVAL,
+ },
+};
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- /* PHY reset GPIO will be runtime programmed based on EVM version */
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
- usbhs_bdata.reset_gpio_port[1] = 21;
+ phy_data[0].reset_gpio = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
- usbhs_bdata.reset_gpio_port[1] = 135;
+ phy_data[0].reset_gpio = 135;
}
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
};
/* ads7846 on SPI and 2 nub controllers on I2C */
printk(KERN_ERR "wl1251 board initialisation failed\n");
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 16,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 16,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
+
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
#define OMAP3_STALKER_TS_GPIO 175
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 21,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 21,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
static void omap3_touchbook_poweroff(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/wl12xx.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap-abe-twl6040.h>
.id = -1,
};
+/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
+static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
+ /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+ .clk_rate = 19200000,
+};
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_HUB_NRESET,
+ .vcc_gpio = GPIO_HUB_POWER,
+ .vcc_polarity = 1,
+ .platform_data = &hsusb1_phy_data,
+ },
+};
+
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = false,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
- { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
- { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
};
static void __init omap4_ehci_init(void)
{
int ret;
- struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- phy_ref_clk = clk_get(NULL, "auxclk3_ck");
- if (IS_ERR(phy_ref_clk)) {
- pr_err("Cannot request auxclk3\n");
- return;
- }
- clk_set_rate(phy_ref_clk, 19200000);
- clk_prepare_enable(phy_ref_clk);
-
- /* disable the power to the usb hub prior to init and reset phy+hub */
- ret = gpio_request_array(panda_ehci_gpios,
- ARRAY_SIZE(panda_ehci_gpios));
- if (ret) {
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
- }
-
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_export(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 1);
+ ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
+ if (ret)
+ pr_err("Failed to add main_clk alias to auxclk3_ck\n");
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
-
- /* enable power to hub */
- gpio_set_value(GPIO_HUB_POWER, 1);
}
static struct omap_musb_board_data musb_board_data = {
return 0;
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = OVERO_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
},
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = ZOOM3_EHCI_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
clk_set_parent(&timer3_fck, &sys_clkin_ck);
clk_set_parent(&timer6_fck, &sys_clkin_ck);
+ /*
+ * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+ * the design/spec, so as a result, for example, timer which supposed
+ * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+ * not expected by any use-case, so change WDT1 clock source to PRCM
+ * 32KHz clock.
+ */
+ clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
return 0;
}
_omap3_noncore_dpll_bypass(clk);
/*
- * Set jitter correction. No jitter correction for OMAP4 and 3630
- * since freqsel field is no longer present
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
*/
- if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
+ if (cpu_is_omap343x()) {
v = __raw_readl(dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
if (!dd)
return -EINVAL;
- __clk_prepare(dd->clk_bypass);
- clk_enable(dd->clk_bypass);
- __clk_prepare(dd->clk_ref);
- clk_enable(dd->clk_ref);
-
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("%s: %s: set rate: entering bypass.\n",
__func__, __clk_get_name(hw->clk));
+ __clk_prepare(dd->clk_bypass);
+ clk_enable(dd->clk_bypass);
ret = _omap3_noncore_dpll_bypass(clk);
if (!ret)
new_parent = dd->clk_bypass;
+ clk_disable(dd->clk_bypass);
+ __clk_unprepare(dd->clk_bypass);
} else {
+ __clk_prepare(dd->clk_ref);
+ clk_enable(dd->clk_ref);
+
if (dd->last_rounded_rate != rate)
rate = __clk_round_rate(hw->clk, rate);
if (dd->last_rounded_rate == 0)
return -EINVAL;
- /* No freqsel on AM335x, OMAP4 and OMAP3630 */
- if (!soc_is_am33xx() && !cpu_is_omap44xx() &&
- !cpu_is_omap3630()) {
+ /* Freqsel is available only on OMAP343X devices */
+ if (cpu_is_omap343x()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
WARN_ON(!freqsel);
ret = omap3_noncore_dpll_program(clk, freqsel);
if (!ret)
new_parent = dd->clk_ref;
+ clk_disable(dd->clk_ref);
+ __clk_unprepare(dd->clk_ref);
}
/*
* FIXME - this is all wrong. common code handles reparenting and
if (!ret)
__clk_reparent(hw->clk, new_parent);
- clk_disable(dd->clk_ref);
- __clk_unprepare(dd->clk_ref);
- clk_disable(dd->clk_bypass);
- __clk_unprepare(dd->clk_bypass);
-
return 0;
}
#include "control.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
#include "omap-pm.h"
#endif
static struct platform_device *omap_dsp_pdev;
static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
.dsp_get_opp = omap_pm_dsp_get_opp,
.cpu_set_freq = omap_pm_cpu_set_freq,
case 0xb942:
switch (rev) {
case 0:
- default:
omap_revision = OMAP5430_REV_ES1_0;
+ break;
+ case 1:
+ default:
+ omap_revision = OMAP5430_REV_ES2_0;
}
break;
case 0xb998:
switch (rev) {
case 0:
- default:
omap_revision = OMAP5432_REV_ES1_0;
+ break;
+ case 1:
+ default:
+ omap_revision = OMAP5432_REV_ES2_0;
}
break;
default:
/* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP5430_REV_ES1_0;
+ omap_revision = OMAP5430_REV_ES2_0;
}
pr_info("OMAP%04x ES%d.0\n",
.length = L4_PER_54XX_SIZE,
.type = MT_DEVICE,
},
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ {
+ .virtual = OMAP4_SRAM_VA,
+ .pfn = __phys_to_pfn(OMAP4_SRAM_PA),
+ .length = PAGE_SIZE,
+ .type = MT_MEMORY_SO,
+ },
+#endif
};
#endif
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+ omap_barriers_init();
}
#endif
/*
*/
static int __init omap4_sar_ram_init(void)
{
+ unsigned long sar_base;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
*/
- if (!cpu_is_omap44xx())
+ if (cpu_is_omap44xx())
+ sar_base = OMAP44XX_SAR_RAM_BASE;
+ else if (soc_is_omap54xx())
+ sar_base = OMAP54XX_SAR_RAM_BASE;
+ else
return -ENOMEM;
/* Static mapping, never released */
- sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
+ sar_ram_base = ioremap(sar_base, SZ_16K);
if (WARN_ON(!sar_ram_base))
return -ENOMEM;
#define SAR_BACKUP_STATUS_WAKEUPGEN 0x10
/* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8d4)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x8e8)
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x8fc)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0x910)
-#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0x924)
-#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x928)
-#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9dc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0 (SAR_BANK3_OFFSET + 0x9f0)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa04)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1 (SAR_BANK3_OFFSET + 0xa18)
+#define OMAP5_AUXCOREBOOT0_OFFSET (SAR_BANK3_OFFSET + 0xa2c)
+#define OMAP5_AUXCOREBOOT1_OFFSET (SAR_BANK3_OFFSET + 0x930)
+#define OMAP5_AMBA_IF_MODE_OFFSET (SAR_BANK3_OFFSET + 0xa34)
#define OMAP5_SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x800)
#endif
#define OMAP54XX_PRCM_MPU_BASE 0x48243000
#define OMAP54XX_SCM_BASE 0x4a002000
#define OMAP54XX_CTRL_BASE 0x4a002800
+#define OMAP54XX_SAR_RAM_BASE 0x4ae26000
#endif /* __ASM_SOC_OMAP555554XX_H */
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/system_misc.h>
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
- oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
-
return 0;
}
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
- oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
-
return 0;
}
}
/**
+ * of_dev_hwmod_lookup - look up needed hwmod from dt blob
+ * @np: struct device_node *
+ * @oh: struct omap_hwmod *
+ *
+ * Parse the dt blob and find out needed hwmod. Recursive function is
+ * implemented to take care hierarchical dt blob parsing.
+ * Return: The device node on success or NULL on failure.
+ */
+static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
+ struct omap_hwmod *oh)
+{
+ struct device_node *np0 = NULL, *np1 = NULL;
+ const char *p;
+
+ for_each_child_of_node(np, np0) {
+ if (of_find_property(np0, "ti,hwmods", NULL)) {
+ p = of_get_property(np0, "ti,hwmods", NULL);
+ if (!strcmp(p, oh->name))
+ return np0;
+ np1 = of_dev_hwmod_lookup(np0, oh);
+ if (np1)
+ return np1;
+ }
+ }
+ return NULL;
+}
+
+/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
*
static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
{
struct omap_hwmod_addr_space *mem;
- void __iomem *va_start;
+ void __iomem *va_start = NULL;
+ struct device_node *np;
if (!oh)
return;
if (!mem) {
pr_debug("omap_hwmod: %s: no MPU register target found\n",
oh->name);
- return;
+
+ /* Extract the IO space from device tree blob */
+ if (!of_have_populated_dt())
+ return;
+
+ np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+ if (np)
+ va_start = of_iomap(np, 0);
+ } else {
+ va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
- va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
if (!va_start) {
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
return;
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
- _init_mpu_rt_base(oh, NULL);
+ if (oh->class->sysc)
+ _init_mpu_rt_base(oh, NULL);
r = _init_clocks(oh, NULL);
if (IS_ERR_VALUE(r)) {
* These are for internal use only and are managed by the omap_hwmod code.
*
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
* _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
* causes the first call to _enable() to only update the pinmux
*/
#define _HWMOD_NO_MPU_PORT (1 << 0)
-#define _HWMOD_WAKEUP_ENABLED (1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED (1 << 2)
-#define _HWMOD_SKIP_ENABLE (1 << 3)
+#define _HWMOD_SYSCONFIG_LOADED (1 << 1)
+#define _HWMOD_SKIP_ENABLE (1 << 2)
/*
* omap_hwmod._state definitions
#include "prm-regbits-33xx.h"
#include "i2c.h"
#include "mmc.h"
+#include "wd_timer.h"
/*
* IP blocks
};
/* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x10,
+ .syss_offs = 0x14,
+ .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
.name = "wd_timer",
+ .sysc = &wdt_sysc,
+ .pre_shutdown = &omap2_wd_timer_disable,
};
/*
.name = "wd_timer2",
.class = &am33xx_wd_timer_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE,
.main_clk = "wdt1_fck",
.prcm = {
.omap4 = {
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
+#include <linux/of.h>
+
#include <asm/pmu.h>
#include "soc.h"
unsigned oh_num;
char **oh_names;
+ /* XXX Remove this check when the CTI driver is available */
+ if (cpu_is_omap443x()) {
+ pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
+ return 0;
+ }
+
+ if (of_have_populated_dt())
+ return 0;
+
/*
* To create an ARM-PMU device the following HWMODs
* are required for the various OMAP2+ devices.
if (cpu_is_omap443x()) {
oh_num = ARRAY_SIZE(omap4430_pmu_oh_names);
oh_names = omap4430_pmu_oh_names;
- /* XXX Remove the next two lines when CTI driver available */
- pr_info("ARM PMU: not yet supported on OMAP4430 due to missing CTI driver\n");
- return 0;
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
oh_num = ARRAY_SIZE(omap3_pmu_oh_names);
oh_names = omap3_pmu_oh_names;
#define ALREADYACTIVE_SWITCH 0
#define FORCEWAKEUP_SWITCH 1
#define LOWPOWERSTATE_SWITCH 2
-#define ERROR_SWITCH 3
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
{
u8 sleep_switch;
- if (curr_pwrst < 0) {
- WARN_ON(1);
- sleep_switch = ERROR_SWITCH;
- } else if (curr_pwrst < PWRDM_POWER_ON) {
+ if (curr_pwrst < PWRDM_POWER_ON) {
if (curr_pwrst > pwrst &&
pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
arch_pwrdm->pwrdm_set_lowpwrstchange) {
*/
int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
{
- u8 curr_pwrst, next_pwrst, sleep_switch;
+ u8 next_pwrst, sleep_switch;
+ int curr_pwrst;
int ret = 0;
bool hwsup = false;
pwrdm_lock(pwrdm);
curr_pwrst = pwrdm_read_pwrst(pwrdm);
+ if (curr_pwrst < 0) {
+ ret = -EINVAL;
+ goto osps_out;
+ }
+
next_pwrst = pwrdm_read_next_pwrst(pwrdm);
if (curr_pwrst == pwrst && next_pwrst == pwrst)
goto osps_out;
sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
pwrst, &hwsup);
- if (sleep_switch == ERROR_SWITCH) {
- ret = -EINVAL;
- goto osps_out;
- }
ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
if (ret)
/* Read a register in a CM/PRM instance in the PRM module */
u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
{
- return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
+ return __raw_readl(prm_base + inst + reg);
}
/* Write into a register in a CM/PRM instance in the PRM module */
void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
{
- __raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
+ __raw_writel(val, prm_base + inst + reg);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
int __init omap44xx_prm_init(void)
{
- if (!cpu_is_omap44xx())
+ if (!cpu_is_omap44xx() && !soc_is_omap54xx())
return 0;
return prm_register(&omap44xx_prm_ll_data);
#define OMAP54XX_CLASS 0x54000054
#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
#define OMAP2_MPU_SOURCE "sys_ck"
#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE
#define OMAP4_MPU_SOURCE "sys_clkin_ck"
+#define OMAP5_MPU_SOURCE "sys_clkin"
#define OMAP2_32K_SOURCE "func_32k_ck"
#define OMAP3_32K_SOURCE "omap_32k_fck"
#define OMAP4_32K_SOURCE "sys_32k_ck"
};
static struct of_device_id omap_timer_match[] __initdata = {
- { .compatible = "ti,omap2-timer", },
+ { .compatible = "ti,omap2420-timer", },
+ { .compatible = "ti,omap3430-timer", },
+ { .compatible = "ti,omap4430-timer", },
+ { .compatible = "ti,omap5430-timer", },
+ { .compatible = "ti,am335x-timer", },
+ { .compatible = "ti,am335x-timer-1ms", },
{ }
};
pr_err("%s: ioremap failed\n", __func__);
return;
}
- sys_clk = clk_get(NULL, "sys_clkin_ck");
+ sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE);
if (IS_ERR(sys_clk)) {
pr_err("%s: failed to get system clock handle\n", __func__);
iounmap(base);
int err;
if (of_have_populated_dt()) {
- twd_local_timer_of_register();
+ clocksource_of_init();
return;
}
#ifdef CONFIG_SOC_OMAP5
OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
+ 2, OMAP5_MPU_SOURCE);
void __init omap5_realtime_timer_init(void)
{
int err;
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
#include "soc.h"
#include "omap_device.h"
}
#endif
+
+/* Template for PHY regulators */
+static struct fixed_voltage_config hsusb_reg_config = {
+ /* .supply_name filled later */
+ .microvolts = 3300000,
+ .gpio = -1, /* updated later */
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1, /* updated later */
+ .enabled_at_boot = 0, /* keep in RESET */
+ /* .init_data filled later */
+};
+
+static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
+
+/**
+ * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
+ * @name: name for the regulator
+ * @dev_id: device id of the device this regulator supplies power to
+ * @dev_supply: supply name that the device expects
+ * @gpio: GPIO number
+ * @polarity: 1 - Active high, 0 - Active low
+ */
+static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
+ int gpio, int polarity)
+{
+ struct regulator_consumer_supply *supplies;
+ struct regulator_init_data *reg_data;
+ struct fixed_voltage_config *config;
+ struct platform_device *pdev;
+ int ret;
+
+ supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
+ if (!supplies)
+ return -ENOMEM;
+
+ supplies->supply = dev_supply;
+ supplies->dev_name = dev_id;
+
+ reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
+ if (!reg_data)
+ return -ENOMEM;
+
+ reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+ reg_data->consumer_supplies = supplies;
+ reg_data->num_consumer_supplies = 1;
+
+ config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ config->supply_name = name;
+ config->gpio = gpio;
+ config->enable_high = polarity;
+ config->init_data = reg_data;
+
+ /* create a regulator device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = PLATFORM_DEVID_AUTO;
+ pdev->name = reg_name;
+ pdev->dev.platform_data = config;
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ pr_err("%s: Failed registering regulator %s for %s\n",
+ __func__, name, dev_id);
+
+ return ret;
+}
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+ char *rail_name;
+ int i, len;
+ struct platform_device *pdev;
+ char *phy_id;
+
+ /* the phy_id will be something like "nop_usb_xceiv.1" */
+ len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+
+ for (i = 0; i < num_phys; i++) {
+
+ if (!phy->port) {
+ pr_err("%s: Invalid port 0. Must start from 1\n",
+ __func__);
+ continue;
+ }
+
+ /* do we need a NOP PHY device ? */
+ if (!gpio_is_valid(phy->reset_gpio) &&
+ !gpio_is_valid(phy->vcc_gpio))
+ continue;
+
+ /* create a NOP PHY device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = phy->port;
+ pdev->name = nop_name;
+ pdev->dev.platform_data = phy->platform_data;
+
+ phy_id = kmalloc(len, GFP_KERNEL);
+ if (!phy_id)
+ return -ENOMEM;
+
+ scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
+ pdev->id);
+
+ if (platform_device_register(pdev)) {
+ pr_err("%s: Failed to register device %s\n",
+ __func__, phy_id);
+ continue;
+ }
+
+ usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
+
+ /* Do we need RESET regulator ? */
+ if (gpio_is_valid(phy->reset_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "reset",
+ phy->reset_gpio, 1);
+ }
+
+ /* Do we need VCC regulator ? */
+ if (gpio_is_valid(phy->vcc_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "vcc",
+ phy->vcc_gpio, phy->vcc_polarity);
+ }
+
+ phy++;
+ }
+
+ return 0;
+}
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
+struct usbhs_phy_data {
+ int port; /* 1 indexed port number */
+ int reset_gpio;
+ int vcc_gpio;
+ bool vcc_polarity; /* 1 active high, 0 active low */
+ void *platform_data;
+};
+
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
+ select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
+ select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
#include <mach/hardware.h>
#include <mach/regs-irq.h>
-#include <plat/irq.h>
-
#include "bast.h"
#define irqdbf(x...)
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <linux/init.h>
#include <linux/clk.h>
-#include <plat/s3c2416.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/pm.h>
+#include "common-smdk.h"
+
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
#include <plat/cpu-freq.h>
#include <plat/pll.h>
+#include "common.h"
+
/* table of supported CPUs */
static const char name_s3c2410[] = "S3C2410";
#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
+struct s3c2410_uartcfg;
+
+#ifdef CONFIG_CPU_S3C2410
+extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
+extern void s3c2410_map_io(void);
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2410_init_clocks(int xtal);
+extern void s3c2410_restart(char mode, const char *cmd);
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#define s3c2410a_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+extern int s3c2412_init(void);
+extern void s3c2412_map_io(void);
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2412_init_clocks(int xtal);
+extern int s3c2412_baseclk_add(void);
+extern void s3c2412_restart(char mode, const char *cmd);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+extern int s3c2416_init(void);
+extern void s3c2416_map_io(void);
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2416_init_clocks(int xtal);
+extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
+extern void s3c2416_init_irq(void);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+extern void s3c244x_map_io(void);
+extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c244x_init_clocks(int xtal);
+extern void s3c244x_restart(char mode, const char *cmd);
+#else
+#define s3c244x_init_clocks NULL
+#define s3c244x_init_uarts NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+extern void s3c2440_map_io(void);
+#else
+#define s3c2440_init NULL
+#define s3c2440_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+extern void s3c2442_map_io(void);
+#else
+#define s3c2442_init NULL
+#define s3c2442_map_io NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+extern int s3c2443_init(void);
+extern void s3c2443_map_io(void);
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s3c2443_init_clocks(int xtal);
+extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
+extern void s3c2443_init_irq(void);
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
extern struct syscore_ops s3c24xx_irq_syscore_ops;
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#include <plat/regs-ac97.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
+++ /dev/null
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON (0x00)
-#define S3C2410_SDIPRE (0x04)
-#define S3C2410_SDICMDARG (0x08)
-#define S3C2410_SDICMDCON (0x0C)
-#define S3C2410_SDICMDSTAT (0x10)
-#define S3C2410_SDIRSP0 (0x14)
-#define S3C2410_SDIRSP1 (0x18)
-#define S3C2410_SDIRSP2 (0x1C)
-#define S3C2410_SDIRSP3 (0x20)
-#define S3C2410_SDITIMER (0x24)
-#define S3C2410_SDIBSIZE (0x28)
-#define S3C2410_SDIDCON (0x2C)
-#define S3C2410_SDIDCNT (0x30)
-#define S3C2410_SDIDSTA (0x34)
-#define S3C2410_SDIFSTA (0x38)
-
-#define S3C2410_SDIDATA (0x3C)
-#define S3C2410_SDIIMSK (0x40)
-
-#define S3C2440_SDIDATA (0x40)
-#define S3C2440_SDIIMSK (0x3C)
-
-#define S3C2440_SDICON_SDRESET (1<<8)
-#define S3C2440_SDICON_MMCCLOCK (1<<5)
-#define S3C2410_SDICON_BYTEORDER (1<<4)
-#define S3C2410_SDICON_SDIOIRQ (1<<3)
-#define S3C2410_SDICON_RWAITEN (1<<2)
-#define S3C2410_SDICON_FIFORESET (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-#define S3C2410_SDICMDCON_INDEX (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-#define S3C2440_SDIDCON_DS_WORD (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-#define S3C2410_SDIDCON_DMAEN (1<<15)
-#define S3C2410_SDIDCON_STOP (1<<14)
-#define S3C2440_SDIDCON_DATSTART (1<<14)
-#define S3C2410_SDIDCON_DATMODE (3<<12)
-#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET (1<<13)
-#define S3C2410_SDIFSTA_RFDET (1<<12)
-#define S3C2410_SDIFSTA_TFHALF (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-#define S3C2410_SDIFSTA_RFLAST (1<<9)
-#define S3C2410_SDIFSTA_RFFULL (1<<8)
-#define S3C2410_SDIFSTA_RFHALF (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-#define S3C2410_SDIIMSK_READWAIT (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-#define S3C2410_SDIIMSK_DATACRC (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/syscore_ops.h>
+#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/irq.h>
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <asm/irq.h>
#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
-#include <plat/irq.h>
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
return 0;
}
-/* FIXME: make static when it's out of plat-samsung/irq.h */
-int s3c_irqext_type(struct irq_data *data, unsigned int type)
+static int s3c_irqext_type(struct irq_data *data, unsigned int type)
{
void __iomem *extint_reg;
void __iomem *gpcon_reg;
extint_offset, type);
}
-struct irq_chip s3c_irq_chip = {
+static struct irq_chip s3c_irq_chip = {
.name = "s3c",
.irq_ack = s3c_irq_ack,
.irq_mask = s3c_irq_mask,
.irq_set_wake = s3c_irq_wake
};
-struct irq_chip s3c_irq_level_chip = {
+static struct irq_chip s3c_irq_level_chip = {
.name = "s3c-level",
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
+
#include "common.h"
static struct resource amlm5900_nor_resource =
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
#ifdef CONFIG_FB_S3C2410
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
#include "anubis.h"
#include "common.h"
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init at2440evb_init(void)
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init(void)
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "gta02.h"
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
+#include "common.h"
#include "s3c2412-power.h"
static struct map_desc jive_iodesc[] __initdata = {
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void jive_power_off(void)
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <sound/s3c24xx_uda134x.h>
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/*
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
-#include <plat/s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
#include "common.h"
n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "otom.h"
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init otom11_init(void)
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/common-smdk.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init qt2410_machine_init(void)
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/pm.h>
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* H1940 and RX3715 need to reserve this for suspend */
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2410_init(void)
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/fb.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2413_iodesc[] __initdata = {
};
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2413_machine_init(void)
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2416.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
#include <plat/fb.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2416_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2416_machine_init(void)
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2416_restart,
MACHINE_END
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
+#include <plat/samsung-time.h>
#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2440_machine_init(void)
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
#include <mach/fb.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
-#include <plat/common-smdk.h>
+#include "common.h"
+#include "common-smdk.h"
static struct map_desc smdk2443_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2443_machine_init(void)
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2443_restart,
MACHINE_END
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init tct_hammer_init(void)
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vr1000_init(void)
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
+#include "common.h"
static struct map_desc vstms_iodesc[] __initdata = {
};
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vstms_init(void)
.init_irq = s3c24xx_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/s3c2412.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s3c2410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
-#include <plat/s3c2412.h>
#include "common.h"
#include "regs-dsc.h"
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/s3c244x.h>
#include <plat/pm.h>
#include <plat/gpio-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
+ select SAMSUNG_HRT
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
+ select SAMSUNG_HRT
bool
help
Enable S3C6410 CPU support
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
anw6410_lcd_mode_set();
}
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "crag6410.h"
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* LCD type and Bypass set by bootloader */
}
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init hmt_machine_init(void)
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init ncp_machine_init(void)
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
smartq_lcd_mode_set();
}
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
config CPU_S5P6440
bool
- select S5P_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select S5P_HRT
+ select SAMSUNG_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6440_set_lcd_interface(void)
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6450_set_lcd_interface(void)
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
bool
select S5P_EXT_INT
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PC100 CPU support
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc100_machine_init(void)
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pc100_restart,
MACHINE_END
config CPU_S5PV210
bool
select S5P_EXT_INT
- select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PV210 CPU support
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init aquila_machine_init(void)
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include <plat/camport.h>
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init goni_reserve(void)
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &goni_reserve,
.restart = s5pv210_restart,
MACHINE_END
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include "common.h"
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc110_reserve(void)
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkc110_reserve,
MACHINE_END
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
}
static void __init smdkv210_reserve(void)
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkv210_reserve,
MACHINE_END
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init torbreck_machine_init(void)
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
#include <linux/amba/pl022.h>
#include <linux/clk.h>
+#include <linux/clocksource.h>
#include <linux/dw_dmac.h>
#include <linux/err.h>
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <asm/smp_twd.h>
#include <mach/dma.h>
#include <mach/generic.h>
#include <mach/spear.h>
clk_put(pclk);
spear_setup_of_timer();
- twd_local_timer_of_register();
+ clocksource_of_init();
}
obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
+obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += board-dt-tegra114.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o
endif
+++ /dev/null
-/*
- * NVIDIA Tegra114 device tree board support
- *
- * Copyright (C) 2013 NVIDIA Corporation
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/clocksource.h>
-
-#include <asm/mach/arch.h>
-
-#include "board.h"
-#include "common.h"
-
-static void __init tegra114_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const tegra114_dt_board_compat[] = {
- "nvidia,tegra114",
- NULL,
-};
-
-DT_MACHINE_START(TEGRA114_DT, "NVIDIA Tegra114 (Flattened Device Tree)")
- .smp = smp_ops(tegra_smp_ops),
- .map_io = tegra_map_common_io,
- .init_early = tegra114_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra114_dt_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra114_dt_board_compat,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-tegra/board-dt-tegra30.c
- *
- * NVIDIA Tegra30 device tree board support
- *
- * Copyright (C) 2011 NVIDIA Corporation
- *
- * Derived from:
- *
- * arch/arm/mach-tegra/board-dt-tegra20.c
- *
- * Copyright (C) 2010 Secret Lab Technologies, Ltd.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "board.h"
-#include "common.h"
-#include "iomap.h"
-
-static void __init tegra30_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *tegra30_dt_board_compat[] = {
- "nvidia,tegra30",
- NULL
-};
-
-DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
- .smp = smp_ops(tegra_smp_ops),
- .map_io = tegra_map_common_io,
- .init_early = tegra30_init_early,
- .init_irq = tegra_dt_init_irq,
- .init_time = clocksource_of_init,
- .init_machine = tegra30_dt_init,
- .init_late = tegra_init_late,
- .restart = tegra_assert_system_reset,
- .dt_compat = tegra30_dt_board_compat,
-MACHINE_END
goto err_reg;
}
- regulator_enable(regulator);
+ err = regulator_enable(regulator);
+ if (err) {
+ pr_err("%s: regulator_enable failed: %d\n", __func__, err);
+ goto err_en;
+ }
err = tegra_pcie_init(true, true);
if (err) {
err_pcie:
regulator_disable(regulator);
+err_en:
regulator_put(regulator);
err_reg:
gpio_free(en_vdd_1v05);
void tegra_assert_system_reset(char mode, const char *cmd);
-void __init tegra20_init_early(void);
-void __init tegra30_init_early(void);
-void __init tegra114_init_early(void);
+void __init tegra_init_early(void);
void __init tegra_map_common_io(void);
void __init tegra_init_irq(void);
void __init tegra_dt_init_irq(void);
#include "common.h"
#include "fuse.h"
#include "iomap.h"
+#include "irq.h"
#include "pmc.h"
#include "apbio.h"
#include "sleep.h"
void __init tegra_dt_init_irq(void)
{
tegra_clocks_init();
+ tegra_pmc_init();
tegra_init_irq();
irqchip_init();
+ tegra_legacy_irq_syscore_init();
}
#endif
}
-static void __init tegra_init_early(void)
+void __init tegra_init_early(void)
{
tegra_cpu_reset_handler_init();
tegra_apb_io_init();
tegra_init_fuse();
tegra_init_cache();
- tegra_pmc_init();
tegra_powergate_init();
+ tegra_hotplug_init();
}
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void __init tegra20_init_early(void)
-{
- tegra_init_early();
- tegra20_hotplug_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void __init tegra30_init_early(void)
-{
- tegra_init_early();
- tegra30_hotplug_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
-void __init tegra114_init_early(void)
-{
- tegra_init_early();
-}
-#endif
-
void __init tegra_init_late(void)
{
+ tegra_init_suspend();
tegra_powergate_debugfs_init();
}
struct cpuidle_driver *drv,
int index)
{
- struct cpuidle_state *state = &drv->states[index];
- u32 cpu_on_time = state->exit_latency;
- u32 cpu_off_time = state->target_residency - state->exit_latency;
-
while (tegra20_cpu_is_resettable_soon())
cpu_relax();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
- tegra_idle_lp2_last(cpu_on_time, cpu_off_time);
+ tegra_idle_lp2_last();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
struct cpuidle_driver *drv,
int index)
{
- struct cpuidle_state *state = &drv->states[index];
- u32 cpu_on_time = state->exit_latency;
- u32 cpu_off_time = state->target_residency - state->exit_latency;
-
/* All CPUs entering LP2 is not working.
* Don't let CPU0 enter LP2 when any secondary CPU is online.
*/
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu);
- tegra_idle_lp2_last(cpu_on_time, cpu_off_time);
+ tegra_idle_lp2_last();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
smp_wmb();
- save_cpu_arch_register();
-
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
- restore_cpu_arch_register();
-
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
return true;
* arch/arm/mach-tegra/fuse.c
*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@android.com>
tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT;
tegra_init_speedo_data = &tegra30_init_speedo_data;
break;
+ case TEGRA114:
+ tegra_init_speedo_data = &tegra114_init_speedo_data;
+ break;
default:
pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id);
tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
/*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Colin Cross <ccross@android.com>
static inline void tegra30_init_speedo_data(void) {}
#endif
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+void tegra114_init_speedo_data(void);
+#else
+static inline void tegra114_init_speedo_data(void) {}
+#endif
+
#endif
ENTRY(tegra_secondary_startup)
bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
b secondary_startup
ENDPROC(tegra_secondary_startup)
/*
- *
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
- * Copyright (c) 2010, 2012 NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <asm/cacheflush.h>
#include <asm/smp_plat.h>
+#include "fuse.h"
#include "sleep.h"
static void (*tegra_hotplug_shutdown)(void);
return cpu == 0 ? -EPERM : 0;
}
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-extern void tegra20_hotplug_shutdown(void);
-void __init tegra20_hotplug_init(void)
+void __init tegra_hotplug_init(void)
{
- tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
-}
-#endif
+ if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
+ return;
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-extern void tegra30_hotplug_shutdown(void);
-void __init tegra30_hotplug_init(void)
-{
- tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
}
-#endif
* Author:
* Colin Cross <ccross@android.com>
*
- * Copyright (C) 2010, NVIDIA Corporation
+ * Copyright (C) 2010,2013, NVIDIA Corporation
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
#include <linux/io.h>
#include <linux/of.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/syscore_ops.h>
#include "board.h"
#include "iomap.h"
#define ICTLR_COP_IEP_CLASS 0x3c
#define FIRST_LEGACY_IRQ 32
+#define TEGRA_MAX_NUM_ICTLRS 5
#define SGI_MASK 0xFFFF
IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE),
};
+#ifdef CONFIG_PM_SLEEP
+static u32 cop_ier[TEGRA_MAX_NUM_ICTLRS];
+static u32 cop_iep[TEGRA_MAX_NUM_ICTLRS];
+static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS];
+static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS];
+
+static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS];
+#endif
+
bool tegra_pending_sgi(void)
{
u32 pending_set;
return 1;
}
+#ifdef CONFIG_PM_SLEEP
+static int tegra_set_wake(struct irq_data *d, unsigned int enable)
+{
+ u32 irq = d->irq;
+ u32 index, mask;
+
+ if (irq < FIRST_LEGACY_IRQ ||
+ irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32)
+ return -EINVAL;
+
+ index = ((irq - FIRST_LEGACY_IRQ) / 32);
+ mask = BIT((irq - FIRST_LEGACY_IRQ) % 32);
+ if (enable)
+ ictlr_wake_mask[index] |= mask;
+ else
+ ictlr_wake_mask[index] &= ~mask;
+
+ return 0;
+}
+
+static int tegra_legacy_irq_suspend(void)
+{
+ unsigned long flags;
+ int i;
+
+ local_irq_save(flags);
+ for (i = 0; i < num_ictlrs; i++) {
+ void __iomem *ictlr = ictlr_reg_base[i];
+ /* Save interrupt state */
+ cpu_ier[i] = readl_relaxed(ictlr + ICTLR_CPU_IER);
+ cpu_iep[i] = readl_relaxed(ictlr + ICTLR_CPU_IEP_CLASS);
+ cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER);
+ cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS);
+
+ /* Disable COP interrupts */
+ writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
+
+ /* Disable CPU interrupts */
+ writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR);
+
+ /* Enable the wakeup sources of ictlr */
+ writel_relaxed(ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET);
+ }
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void tegra_legacy_irq_resume(void)
+{
+ unsigned long flags;
+ int i;
+
+ local_irq_save(flags);
+ for (i = 0; i < num_ictlrs; i++) {
+ void __iomem *ictlr = ictlr_reg_base[i];
+ writel_relaxed(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS);
+ writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR);
+ writel_relaxed(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET);
+ writel_relaxed(cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS);
+ writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
+ writel_relaxed(cop_ier[i], ictlr + ICTLR_COP_IER_SET);
+ }
+ local_irq_restore(flags);
+}
+
+static struct syscore_ops tegra_legacy_irq_syscore_ops = {
+ .suspend = tegra_legacy_irq_suspend,
+ .resume = tegra_legacy_irq_resume,
+};
+
+int tegra_legacy_irq_syscore_init(void)
+{
+ register_syscore_ops(&tegra_legacy_irq_syscore_ops);
+
+ return 0;
+}
+#else
+#define tegra_set_wake NULL
+#endif
+
void __init tegra_init_irq(void)
{
int i;
gic_arch_extn.irq_mask = tegra_mask;
gic_arch_extn.irq_unmask = tegra_unmask;
gic_arch_extn.irq_retrigger = tegra_retrigger;
+ gic_arch_extn.irq_set_wake = tegra_set_wake;
+ gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND;
/*
* Check if there is a devicetree present, since the GIC will be
bool tegra_pending_sgi(void);
+#ifdef CONFIG_PM_SLEEP
+int tegra_legacy_irq_syscore_init(void);
+#else
+static inline int tegra_legacy_irq_syscore_init(void) { return 0; }
+#endif
+
#endif
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
-#include <mach/powergate.h>
-
#include "fuse.h"
#include "flowctrl.h"
#include "reset.h"
+#include "pmc.h"
#include "common.h"
#include "iomap.h"
-extern void tegra_secondary_startup(void);
-
static cpumask_t tegra_cpu_init_mask;
-#define EVP_CPU_RESET_VECTOR \
- (IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-
static void __cpuinit tegra_secondary_init(unsigned int cpu)
{
/*
cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
}
-static int tegra20_power_up_cpu(unsigned int cpu)
+
+static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- /* Enable the CPU clock. */
- tegra_enable_cpu_clock(cpu);
+ cpu = cpu_logical_map(cpu);
+
+ /*
+ * Force the CPU into reset. The CPU must remain in reset when
+ * the flow controller state is cleared (which will cause the
+ * flow controller to stop driving reset if the CPU has been
+ * power-gated via the flow controller). This will have no
+ * effect on first boot of the CPU since it should already be
+ * in reset.
+ */
+ tegra_put_cpu_in_reset(cpu);
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ /*
+ * Unhalt the CPU. If the flow controller was used to
+ * power-gate the CPU this will cause the flow controller to
+ * stop driving reset. The CPU will remain in reset because the
+ * clock and reset block is now driving reset.
+ */
+ flowctrl_write_cpu_halt(cpu, 0);
+ tegra_enable_cpu_clock(cpu);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int tegra30_power_up_cpu(unsigned int cpu)
+static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int ret, pwrgateid;
+ int ret;
unsigned long timeout;
- pwrgateid = tegra_cpu_powergate_id(cpu);
- if (pwrgateid < 0)
- return pwrgateid;
+ cpu = cpu_logical_map(cpu);
+ tegra_put_cpu_in_reset(cpu);
+ flowctrl_write_cpu_halt(cpu, 0);
/*
* The power up sequence of cold boot CPU and warm boot CPU
* the IO clamps.
* For cold boot CPU, do not wait. After the cold boot CPU be
* booted, it will run to tegra_secondary_init() and set
- * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+ * tegra_cpu_init_mask which influences what tegra30_boot_secondary()
* next time around.
*/
if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
timeout = jiffies + msecs_to_jiffies(50);
do {
- if (!tegra_powergate_is_powered(pwrgateid))
+ if (tegra_pmc_cpu_is_powered(cpu))
goto remove_clamps;
udelay(10);
} while (time_before(jiffies, timeout));
* be un-gated by un-toggling the power gate register
* manually.
*/
- if (!tegra_powergate_is_powered(pwrgateid)) {
- ret = tegra_powergate_power_on(pwrgateid);
+ if (!tegra_pmc_cpu_is_powered(cpu)) {
+ ret = tegra_pmc_cpu_power_on(cpu);
if (ret)
return ret;
/* Wait for the power to come up. */
timeout = jiffies + msecs_to_jiffies(100);
- while (tegra_powergate_is_powered(pwrgateid)) {
+ while (tegra_pmc_cpu_is_powered(cpu)) {
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
udelay(10);
udelay(10);
/* Remove I/O clamps. */
- ret = tegra_powergate_remove_clamping(pwrgateid);
- udelay(10);
+ ret = tegra_pmc_cpu_remove_clamping(cpu);
+ if (ret)
+ return ret;
- /* Clear flow controller CSR. */
- flowctrl_write_cpu_csr(cpu, 0);
+ udelay(10);
+ flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+ tegra_cpu_out_of_reset(cpu);
return 0;
}
-static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- int status;
-
cpu = cpu_logical_map(cpu);
+ return tegra_pmc_cpu_power_on(cpu);
+}
- /*
- * Force the CPU into reset. The CPU must remain in reset when the
- * flow controller state is cleared (which will cause the flow
- * controller to stop driving reset if the CPU has been power-gated
- * via the flow controller). This will have no effect on first boot
- * of the CPU since it should already be in reset.
- */
- tegra_put_cpu_in_reset(cpu);
-
- /*
- * Unhalt the CPU. If the flow controller was used to power-gate the
- * CPU this will cause the flow controller to stop driving reset.
- * The CPU will remain in reset because the clock and reset block
- * is now driving reset.
- */
- flowctrl_write_cpu_halt(cpu, 0);
-
- switch (tegra_chip_id) {
- case TEGRA20:
- status = tegra20_power_up_cpu(cpu);
- break;
- case TEGRA30:
- status = tegra30_power_up_cpu(cpu);
- break;
- default:
- status = -EINVAL;
- break;
- }
-
- if (status)
- goto done;
-
- /* Take the CPU out of reset. */
- tegra_cpu_out_of_reset(cpu);
-done:
- return status;
+static int __cpuinit tegra_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ return tegra20_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ return tegra30_boot_secondary(cpu, idle);
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
+ return tegra114_boot_secondary(cpu, idle);
+
+ return -EINVAL;
}
static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/cpu_pm.h>
-#include <linux/clk.h>
+#include <linux/suspend.h>
#include <linux/err.h>
#include <linux/clk/tegra.h>
#include "reset.h"
#include "flowctrl.h"
#include "fuse.h"
+#include "pmc.h"
#include "sleep.h"
-
-#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
-
-#define PMC_CTRL 0x0
-#define PMC_CPUPWRGOOD_TIMER 0xc8
-#define PMC_CPUPWROFF_TIMER 0xcc
+#include "pmc.h"
#ifdef CONFIG_PM_SLEEP
-static unsigned int g_diag_reg;
static DEFINE_SPINLOCK(tegra_lp2_lock);
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-static struct clk *tegra_pclk;
void (*tegra_tear_down_cpu)(void);
-void save_cpu_arch_register(void)
-{
- /* read diagnostic register */
- asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
- return;
-}
-
-void restore_cpu_arch_register(void)
-{
- /* write diagnostic register */
- asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
- return;
-}
-
-static void set_power_timers(unsigned long us_on, unsigned long us_off)
-{
- unsigned long long ticks;
- unsigned long long pclk;
- unsigned long rate;
- static unsigned long tegra_last_pclk;
-
- if (tegra_pclk == NULL) {
- tegra_pclk = clk_get_sys(NULL, "pclk");
- WARN_ON(IS_ERR(tegra_pclk));
- }
-
- rate = clk_get_rate(tegra_pclk);
-
- if (WARN_ON_ONCE(rate <= 0))
- pclk = 100000000;
- else
- pclk = rate;
-
- if ((rate != tegra_last_pclk)) {
- ticks = (us_on * pclk) + 999999ull;
- do_div(ticks, 1000000);
- writel((unsigned long)ticks, pmc + PMC_CPUPWRGOOD_TIMER);
-
- ticks = (us_off * pclk) + 999999ull;
- do_div(ticks, 1000000);
- writel((unsigned long)ticks, pmc + PMC_CPUPWROFF_TIMER);
- wmb();
- }
- tegra_last_pclk = pclk;
-}
-
/*
* restore_cpu_complex
*
tegra_cpu_clock_resume();
flowctrl_cpu_suspend_exit(cpu);
-
- restore_cpu_arch_register();
}
/*
tegra_cpu_clock_suspend();
flowctrl_cpu_suspend_enter(cpu);
-
- save_cpu_arch_register();
}
void tegra_clear_cpu_in_lp2(int phy_cpu_id)
return 0;
}
-void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time)
+void tegra_idle_lp2_last(void)
{
- u32 mode;
-
- /* Only the last cpu down does the final suspend steps */
- mode = readl(pmc + PMC_CTRL);
- mode |= TEGRA_POWER_CPU_PWRREQ_OE;
- writel(mode, pmc + PMC_CTRL);
-
- set_power_timers(cpu_on_time, cpu_off_time);
+ tegra_pmc_pm_set(TEGRA_SUSPEND_LP2);
cpu_cluster_pm_enter();
suspend_cpu_complex();
restore_cpu_complex();
cpu_cluster_pm_exit();
}
+
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode)
+{
+ /* Tegra114 didn't support any suspending mode yet. */
+ if (tegra_chip_id == TEGRA114)
+ return TEGRA_SUSPEND_NONE;
+
+ /*
+ * The Tegra devices only support suspending to LP2 currently.
+ */
+ if (mode > TEGRA_SUSPEND_LP2)
+ return TEGRA_SUSPEND_LP2;
+
+ return mode;
+}
+
+static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
+ [TEGRA_SUSPEND_NONE] = "none",
+ [TEGRA_SUSPEND_LP2] = "LP2",
+ [TEGRA_SUSPEND_LP1] = "LP1",
+ [TEGRA_SUSPEND_LP0] = "LP0",
+};
+
+static int __cpuinit tegra_suspend_enter(suspend_state_t state)
+{
+ enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+ if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
+ mode >= TEGRA_MAX_SUSPEND_MODE))
+ return -EINVAL;
+
+ pr_info("Entering suspend state %s\n", lp_state[mode]);
+
+ tegra_pmc_pm_set(mode);
+
+ local_fiq_disable();
+
+ suspend_cpu_complex();
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ tegra_set_cpu_in_lp2(0);
+ break;
+ default:
+ break;
+ }
+
+ cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ tegra_clear_cpu_in_lp2(0);
+ break;
+ default:
+ break;
+ }
+ restore_cpu_complex();
+
+ local_fiq_enable();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops tegra_suspend_ops = {
+ .valid = suspend_valid_only_mem,
+ .enter = tegra_suspend_enter,
+};
+
+void __init tegra_init_suspend(void)
+{
+ if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE)
+ return;
+
+ tegra_pmc_suspend_init();
+
+ suspend_set_ops(&tegra_suspend_ops);
+}
#endif
#ifndef _MACH_TEGRA_PM_H_
#define _MACH_TEGRA_PM_H_
+#include "pmc.h"
+
extern unsigned long l2x0_saved_regs_addr;
void save_cpu_arch_register(void);
void tegra_clear_cpu_in_lp2(int phy_cpu_id);
bool tegra_set_cpu_in_lp2(int phy_cpu_id);
-void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time);
+void tegra_idle_lp2_last(void);
extern void (*tegra_tear_down_cpu)(void);
+#ifdef CONFIG_PM_SLEEP
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode);
+void tegra_init_suspend(void);
+#else
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+ enum tegra_suspend_mode mode)
+{
+ return TEGRA_SUSPEND_NONE;
+}
+static inline void tegra_init_suspend(void) {}
+#endif
+
#endif /* _MACH_TEGRA_PM_H_ */
/*
- * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2012,2013 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
*/
#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
-#include "iomap.h"
+#include "fuse.h"
+#include "pm.h"
+#include "pmc.h"
+#include "sleep.h"
-#define PMC_CTRL 0x0
-#define PMC_CTRL_INTR_LOW (1 << 17)
+#define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */
+#define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */
+#define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_INTR_LOW (1 << 17)
+#define PMC_PWRGATE_TOGGLE 0x30
+#define PMC_PWRGATE_TOGGLE_START (1 << 8)
+#define PMC_REMOVE_CLAMPING 0x34
+#define PMC_PWRGATE_STATUS 0x38
+
+#define PMC_CPUPWRGOOD_TIMER 0xc8
+#define PMC_CPUPWROFF_TIMER 0xcc
+
+#define TEGRA_POWERGATE_PCIE 3
+#define TEGRA_POWERGATE_VDEC 4
+#define TEGRA_POWERGATE_CPU1 9
+#define TEGRA_POWERGATE_CPU2 10
+#define TEGRA_POWERGATE_CPU3 11
+
+static u8 tegra_cpu_domains[] = {
+ 0xFF, /* not available for CPU0 */
+ TEGRA_POWERGATE_CPU1,
+ TEGRA_POWERGATE_CPU2,
+ TEGRA_POWERGATE_CPU3,
+};
+static DEFINE_SPINLOCK(tegra_powergate_lock);
+
+static void __iomem *tegra_pmc_base;
+static bool tegra_pmc_invert_interrupt;
+static struct clk *tegra_pclk;
+
+struct pmc_pm_data {
+ u32 cpu_good_time; /* CPU power good time in uS */
+ u32 cpu_off_time; /* CPU power off time in uS */
+ u32 core_osc_time; /* Core power good osc time in uS */
+ u32 core_pmu_time; /* Core power good pmu time in uS */
+ u32 core_off_time; /* Core power off time in uS */
+ bool corereq_high; /* Core power request active-high */
+ bool sysclkreq_high; /* System clock request active-high */
+ bool combined_req; /* Combined pwr req for CPU & Core */
+ bool cpu_pwr_good_en; /* CPU power good signal is enabled */
+ u32 lp0_vec_phy_addr; /* The phy addr of LP0 warm boot code */
+ u32 lp0_vec_size; /* The size of LP0 warm boot code */
+ enum tegra_suspend_mode suspend_mode;
+};
+static struct pmc_pm_data pmc_pm_data;
static inline u32 tegra_pmc_readl(u32 reg)
{
- return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
+ return readl(tegra_pmc_base + reg);
}
static inline void tegra_pmc_writel(u32 val, u32 reg)
{
- writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
+ writel(val, tegra_pmc_base + reg);
+}
+
+static int tegra_pmc_get_cpu_powerdomain_id(int cpuid)
+{
+ if (cpuid <= 0 || cpuid >= num_possible_cpus())
+ return -EINVAL;
+ return tegra_cpu_domains[cpuid];
+}
+
+static bool tegra_pmc_powergate_is_powered(int id)
+{
+ return (tegra_pmc_readl(PMC_PWRGATE_STATUS) >> id) & 1;
+}
+
+static int tegra_pmc_powergate_set(int id, bool new_state)
+{
+ bool old_state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tegra_powergate_lock, flags);
+
+ old_state = tegra_pmc_powergate_is_powered(id);
+ WARN_ON(old_state == new_state);
+
+ tegra_pmc_writel(PMC_PWRGATE_TOGGLE_START | id, PMC_PWRGATE_TOGGLE);
+
+ spin_unlock_irqrestore(&tegra_powergate_lock, flags);
+
+ return 0;
+}
+
+static int tegra_pmc_powergate_remove_clamping(int id)
+{
+ u32 mask;
+
+ /*
+ * Tegra has a bug where PCIE and VDE clamping masks are
+ * swapped relatively to the partition ids.
+ */
+ if (id == TEGRA_POWERGATE_VDEC)
+ mask = (1 << TEGRA_POWERGATE_PCIE);
+ else if (id == TEGRA_POWERGATE_PCIE)
+ mask = (1 << TEGRA_POWERGATE_VDEC);
+ else
+ mask = (1 << id);
+
+ tegra_pmc_writel(mask, PMC_REMOVE_CLAMPING);
+
+ return 0;
+}
+
+bool tegra_pmc_cpu_is_powered(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return false;
+ return tegra_pmc_powergate_is_powered(id);
}
-#ifdef CONFIG_OF
+int tegra_pmc_cpu_power_on(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return id;
+ return tegra_pmc_powergate_set(id, true);
+}
+
+int tegra_pmc_cpu_remove_clamping(int cpuid)
+{
+ int id;
+
+ id = tegra_pmc_get_cpu_powerdomain_id(cpuid);
+ if (id < 0)
+ return id;
+ return tegra_pmc_powergate_remove_clamping(id);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void set_power_timers(u32 us_on, u32 us_off, unsigned long rate)
+{
+ unsigned long long ticks;
+ unsigned long long pclk;
+ static unsigned long tegra_last_pclk;
+
+ if (WARN_ON_ONCE(rate <= 0))
+ pclk = 100000000;
+ else
+ pclk = rate;
+
+ if ((rate != tegra_last_pclk)) {
+ ticks = (us_on * pclk) + 999999ull;
+ do_div(ticks, 1000000);
+ tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWRGOOD_TIMER);
+
+ ticks = (us_off * pclk) + 999999ull;
+ do_div(ticks, 1000000);
+ tegra_pmc_writel((unsigned long)ticks, PMC_CPUPWROFF_TIMER);
+ wmb();
+ }
+ tegra_last_pclk = pclk;
+}
+
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void)
+{
+ return pmc_pm_data.suspend_mode;
+}
+
+void tegra_pmc_pm_set(enum tegra_suspend_mode mode)
+{
+ u32 reg;
+ unsigned long rate = 0;
+
+ reg = tegra_pmc_readl(PMC_CTRL);
+ reg |= TEGRA_POWER_CPU_PWRREQ_OE;
+ reg &= ~TEGRA_POWER_EFFECT_LP0;
+
+ switch (mode) {
+ case TEGRA_SUSPEND_LP2:
+ rate = clk_get_rate(tegra_pclk);
+ break;
+ default:
+ break;
+ }
+
+ set_power_timers(pmc_pm_data.cpu_good_time, pmc_pm_data.cpu_off_time,
+ rate);
+
+ tegra_pmc_writel(reg, PMC_CTRL);
+}
+
+void tegra_pmc_suspend_init(void)
+{
+ u32 reg;
+
+ /* Always enable CPU power request */
+ reg = tegra_pmc_readl(PMC_CTRL);
+ reg |= TEGRA_POWER_CPU_PWRREQ_OE;
+ tegra_pmc_writel(reg, PMC_CTRL);
+}
+#endif
+
static const struct of_device_id matches[] __initconst = {
+ { .compatible = "nvidia,tegra114-pmc" },
+ { .compatible = "nvidia,tegra30-pmc" },
{ .compatible = "nvidia,tegra20-pmc" },
{ }
};
-#endif
-void __init tegra_pmc_init(void)
+static void tegra_pmc_parse_dt(void)
{
- /*
- * For now, Harmony is the only board that uses the PMC, and it wants
- * the signal inverted. Seaboard would too if it used the PMC.
- * Hopefully by the time other boards want to use the PMC, everything
- * will be device-tree, or they also want it inverted.
- */
- bool invert_interrupt = true;
- u32 val;
+ struct device_node *np;
+ u32 prop;
+ enum tegra_suspend_mode suspend_mode;
+ u32 core_good_time[2] = {0, 0};
+ u32 lp0_vec[2] = {0, 0};
-#ifdef CONFIG_OF
- if (of_have_populated_dt()) {
- struct device_node *np;
+ np = of_find_matching_node(NULL, matches);
+ BUG_ON(!np);
- invert_interrupt = false;
+ tegra_pmc_base = of_iomap(np, 0);
- np = of_find_matching_node(NULL, matches);
- if (np) {
- if (of_find_property(np, "nvidia,invert-interrupt",
- NULL))
- invert_interrupt = true;
+ tegra_pmc_invert_interrupt = of_property_read_bool(np,
+ "nvidia,invert-interrupt");
+ tegra_pclk = of_clk_get_by_name(np, "pclk");
+ WARN_ON(IS_ERR(tegra_pclk));
+
+ /* Grabbing the power management configurations */
+ if (of_property_read_u32(np, "nvidia,suspend-mode", &prop)) {
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ } else {
+ switch (prop) {
+ case 0:
+ suspend_mode = TEGRA_SUSPEND_LP0;
+ break;
+ case 1:
+ suspend_mode = TEGRA_SUSPEND_LP1;
+ break;
+ case 2:
+ suspend_mode = TEGRA_SUSPEND_LP2;
+ break;
+ default:
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ break;
}
}
-#endif
+ suspend_mode = tegra_pm_validate_suspend_mode(suspend_mode);
+
+ if (of_property_read_u32(np, "nvidia,cpu-pwr-good-time", &prop))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.cpu_good_time = prop;
+
+ if (of_property_read_u32(np, "nvidia,cpu-pwr-off-time", &prop))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.cpu_off_time = prop;
+
+ if (of_property_read_u32_array(np, "nvidia,core-pwr-good-time",
+ core_good_time, ARRAY_SIZE(core_good_time)))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.core_osc_time = core_good_time[0];
+ pmc_pm_data.core_pmu_time = core_good_time[1];
+
+ if (of_property_read_u32(np, "nvidia,core-pwr-off-time",
+ &prop))
+ suspend_mode = TEGRA_SUSPEND_NONE;
+ pmc_pm_data.core_off_time = prop;
+
+ pmc_pm_data.corereq_high = of_property_read_bool(np,
+ "nvidia,core-power-req-active-high");
+
+ pmc_pm_data.sysclkreq_high = of_property_read_bool(np,
+ "nvidia,sys-clock-req-active-high");
+
+ pmc_pm_data.combined_req = of_property_read_bool(np,
+ "nvidia,combined-power-req");
+
+ pmc_pm_data.cpu_pwr_good_en = of_property_read_bool(np,
+ "nvidia,cpu-pwr-good-en");
+
+ if (of_property_read_u32_array(np, "nvidia,lp0-vec", lp0_vec,
+ ARRAY_SIZE(lp0_vec)))
+ if (suspend_mode == TEGRA_SUSPEND_LP0)
+ suspend_mode = TEGRA_SUSPEND_LP1;
+
+ pmc_pm_data.lp0_vec_phy_addr = lp0_vec[0];
+ pmc_pm_data.lp0_vec_size = lp0_vec[1];
+
+ pmc_pm_data.suspend_mode = suspend_mode;
+}
+
+void __init tegra_pmc_init(void)
+{
+ u32 val;
+
+ tegra_pmc_parse_dt();
val = tegra_pmc_readl(PMC_CTRL);
- if (invert_interrupt)
+ if (tegra_pmc_invert_interrupt)
val |= PMC_CTRL_INTR_LOW;
else
val &= ~PMC_CTRL_INTR_LOW;
#ifndef __MACH_TEGRA_PMC_H
#define __MACH_TEGRA_PMC_H
+enum tegra_suspend_mode {
+ TEGRA_SUSPEND_NONE = 0,
+ TEGRA_SUSPEND_LP2, /* CPU voltage off */
+ TEGRA_SUSPEND_LP1, /* CPU voltage off, DRAM self-refresh */
+ TEGRA_SUSPEND_LP0, /* CPU + core voltage off, DRAM self-refresh */
+ TEGRA_MAX_SUSPEND_MODE,
+};
+
+#ifdef CONFIG_PM_SLEEP
+enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
+void tegra_pmc_pm_set(enum tegra_suspend_mode mode);
+void tegra_pmc_suspend_init(void);
+#endif
+
+bool tegra_pmc_cpu_is_powered(int cpuid);
+int tegra_pmc_cpu_power_on(int cpuid);
+int tegra_pmc_cpu_remove_clamping(int cpuid);
+
void tegra_pmc_init(void);
#endif
*/
ENTRY(tegra_resume)
bl v7_invalidate_l1
- /* Enable coresight */
- mov32 r0, 0xC5ACCE55
- mcr p14, 0, r0, c7, c12, 6
cpu_id r0
cmp r0, #0 @ CPU0?
*
* Register usage within the reset handler:
*
+ * Others: scratch
+ * R6 = SoC ID << 8
* R7 = CPU present (to the OS) mask
* R8 = CPU in LP1 state mask
* R9 = CPU in LP2 state mask
ENTRY(__tegra_cpu_reset_handler)
cpsid aif, 0x13 @ SVC mode, interrupts disabled
+
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r6, [r6, #APB_MISC_GP_HIDREV]
+ and r6, r6, #0xff00
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+t20_check:
+ cmp r6, #(0x20 << 8)
+ bne after_t20_check
+t20_errata:
+ # Tegra20 is a Cortex-A9 r1p1
+ mrc p15, 0, r0, c1, c0, 0 @ read system control register
+ orr r0, r0, #1 << 14 @ erratum 716044
+ mcr p15, 0, r0, c1, c0, 0 @ write system control register
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 4 @ erratum 742230
+ orr r0, r0, #1 << 11 @ erratum 751472
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ b after_errata
+after_t20_check:
+#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+t30_check:
+ cmp r6, #(0x30 << 8)
+ bne after_t30_check
+t30_errata:
+ # Tegra30 is a Cortex-A9 r2p9
+ mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register
+ orr r0, r0, #1 << 6 @ erratum 743622
+ orr r0, r0, #1 << 11 @ erratum 751472
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ b after_errata
+after_t30_check:
+#endif
+after_errata:
mrc p15, 0, r10, c0, c0, 5 @ MPIDR
and r10, r10, #0x3 @ R10 = CPU number
mov r11, #1
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
+ cmp r6, #(0x20 << 8)
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
- mov32 r6, TEGRA_PMC_BASE
+ mov32 r5, TEGRA_PMC_BASE
mov r0, #0
cmp r10, #0
- strne r0, [r6, #PMC_SCRATCH41]
+ strne r0, [r5, #PMC_SCRATCH41]
1:
#endif
/*
- * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
void tegra_disable_clean_inv_dcache(void);
#ifdef CONFIG_HOTPLUG_CPU
-void tegra20_hotplug_init(void);
-void tegra30_hotplug_init(void);
+void tegra20_hotplug_shutdown(void);
+void tegra30_hotplug_shutdown(void);
+void tegra_hotplug_init(void);
#else
-static inline void tegra20_hotplug_init(void) {}
-static inline void tegra30_hotplug_init(void) {}
+static inline void tegra_hotplug_init(void) {}
#endif
void tegra20_cpu_shutdown(int cpu);
/*
- * nVidia Tegra device tree board support
+ * NVIDIA Tegra SoC device tree board support
*
+ * Copyright (C) 2011, 2013, NVIDIA Corporation
* Copyright (C) 2010 Secret Lab Technologies, Ltd.
* Copyright (C) 2010 Google, Inc.
*
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
+#include <linux/clk/tegra.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "board.h"
#include "common.h"
+#include "fuse.h"
#include "iomap.h"
static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
static void __init tegra_dt_init(void)
{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device *parent = NULL;
+
+ tegra_clocks_apply_init_table();
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ goto out;
+
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra");
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr);
+ goto out;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+
/*
* Finished with the static registrations now; fill in the missing
* devices
*/
+out:
of_platform_populate(NULL, of_default_bus_match_table,
- tegra20_auxdata_lookup, NULL);
+ tegra20_auxdata_lookup, parent);
}
static void __init trimslice_init(void)
static void __init paz00_init(void)
{
- tegra_paz00_wifikill_init();
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+ tegra_paz00_wifikill_init();
}
static struct {
}
}
-static const char *tegra20_dt_board_compat[] = {
+static const char * const tegra_dt_board_compat[] = {
+ "nvidia,tegra114",
+ "nvidia,tegra30",
"nvidia,tegra20",
NULL
};
-DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
+DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
.map_io = tegra_map_common_io,
.smp = smp_ops(tegra_smp_ops),
- .init_early = tegra20_init_early,
+ .init_early = tegra_init_early,
.init_irq = tegra_dt_init_irq,
.init_time = clocksource_of_init,
.init_machine = tegra_dt_init,
.init_late = tegra_dt_init_late,
.restart = tegra_assert_system_reset,
- .dt_compat = tegra20_dt_board_compat,
+ .dt_compat = tegra_dt_board_compat,
MACHINE_END
--- /dev/null
+/*
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+
+#include "fuse.h"
+
+#define CORE_PROCESS_CORNERS_NUM 2
+#define CPU_PROCESS_CORNERS_NUM 2
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
+ {1123, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
+ {1695, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold)
+{
+ u32 tmp;
+
+ switch (sku) {
+ case 0x00:
+ case 0x10:
+ case 0x05:
+ case 0x06:
+ tegra_cpu_speedo_id = 1;
+ tegra_soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+
+ case 0x03:
+ case 0x04:
+ tegra_cpu_speedo_id = 2;
+ tegra_soc_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+
+ default:
+ pr_err("Tegra114 Unknown SKU %d\n", sku);
+ tegra_cpu_speedo_id = 0;
+ tegra_soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+ }
+
+ if (rev == TEGRA_REVISION_A01) {
+ tmp = tegra_fuse_readl(0x270) << 1;
+ tmp |= tegra_fuse_readl(0x26c);
+ if (!tmp)
+ tegra_cpu_speedo_id = 0;
+ }
+}
+
+void tegra114_init_speedo_data(void)
+{
+ u32 cpu_speedo_val;
+ u32 core_speedo_val;
+ int threshold;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold);
+
+ cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024;
+ core_speedo_val = tegra_fuse_readl(0x134);
+
+ for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++)
+ if (cpu_speedo_val < cpu_process_speedos[threshold][i])
+ break;
+ tegra_cpu_process_id = i;
+
+ for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++)
+ if (core_speedo_val < core_process_speedos[threshold][i])
+ break;
+ tegra_core_process_id = i;
+}
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
twd_local_timer = &u8500_twd_local_timer;
if (of_have_populated_dt())
- twd_local_timer_of_register();
+ clocksource_of_init();
else {
err = twd_local_timer_register(twd_local_timer);
if (err)
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/irqchip.h>
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
-#include <asm/smp_twd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
vexpress_clk_of_init();
+ clocksource_of_init();
do {
node = of_find_compatible_node(node, NULL, "arm,sp804");
} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
irq_of_parse_and_map(node, 0));
}
- if (arch_timer_of_register() != 0)
- twd_local_timer_of_register();
+ arch_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);
+enum {
+ REQUEST_ANY = 0,
+ REQUEST_BY_ID,
+ REQUEST_BY_CAP,
+ REQUEST_BY_NODE,
+};
+
/**
* omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
* @timer: timer pointer over which read operation to perform
return 0;
}
-struct omap_dm_timer *omap_dm_timer_request(void)
+static struct omap_dm_timer *_omap_dm_timer_request(int req_type, void *data)
{
struct omap_dm_timer *timer = NULL, *t;
+ struct device_node *np = NULL;
unsigned long flags;
- int ret = 0;
+ u32 cap = 0;
+ int id = 0;
+
+ switch (req_type) {
+ case REQUEST_BY_ID:
+ id = *(int *)data;
+ break;
+ case REQUEST_BY_CAP:
+ cap = *(u32 *)data;
+ break;
+ case REQUEST_BY_NODE:
+ np = (struct device_node *)data;
+ break;
+ default:
+ /* REQUEST_ANY */
+ break;
+ }
spin_lock_irqsave(&dm_timer_lock, flags);
list_for_each_entry(t, &omap_timer_list, node) {
if (t->reserved)
continue;
- timer = t;
- timer->reserved = 1;
- break;
+ switch (req_type) {
+ case REQUEST_BY_ID:
+ if (id == t->pdev->id) {
+ timer = t;
+ timer->reserved = 1;
+ goto found;
+ }
+ break;
+ case REQUEST_BY_CAP:
+ if (cap == (t->capability & cap)) {
+ /*
+ * If timer is not NULL, we have already found
+ * one timer but it was not an exact match
+ * because it had more capabilites that what
+ * was required. Therefore, unreserve the last
+ * timer found and see if this one is a better
+ * match.
+ */
+ if (timer)
+ timer->reserved = 0;
+ timer = t;
+ timer->reserved = 1;
+
+ /* Exit loop early if we find an exact match */
+ if (t->capability == cap)
+ goto found;
+ }
+ break;
+ case REQUEST_BY_NODE:
+ if (np == t->pdev->dev.of_node) {
+ timer = t;
+ timer->reserved = 1;
+ goto found;
+ }
+ break;
+ default:
+ /* REQUEST_ANY */
+ timer = t;
+ timer->reserved = 1;
+ goto found;
+ }
}
+found:
spin_unlock_irqrestore(&dm_timer_lock, flags);
- if (timer) {
- ret = omap_dm_timer_prepare(timer);
- if (ret) {
- timer->reserved = 0;
- timer = NULL;
- }
+ if (timer && omap_dm_timer_prepare(timer)) {
+ timer->reserved = 0;
+ timer = NULL;
}
if (!timer)
return timer;
}
+
+struct omap_dm_timer *omap_dm_timer_request(void)
+{
+ return _omap_dm_timer_request(REQUEST_ANY, NULL);
+}
EXPORT_SYMBOL_GPL(omap_dm_timer_request);
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
- struct omap_dm_timer *timer = NULL, *t;
- unsigned long flags;
- int ret = 0;
-
/* Requesting timer by ID is not supported when device tree is used */
if (of_have_populated_dt()) {
- pr_warn("%s: Please use omap_dm_timer_request_by_cap()\n",
+ pr_warn("%s: Please use omap_dm_timer_request_by_cap/node()\n",
__func__);
return NULL;
}
- spin_lock_irqsave(&dm_timer_lock, flags);
- list_for_each_entry(t, &omap_timer_list, node) {
- if (t->pdev->id == id && !t->reserved) {
- timer = t;
- timer->reserved = 1;
- break;
- }
- }
- spin_unlock_irqrestore(&dm_timer_lock, flags);
-
- if (timer) {
- ret = omap_dm_timer_prepare(timer);
- if (ret) {
- timer->reserved = 0;
- timer = NULL;
- }
- }
-
- if (!timer)
- pr_debug("%s: timer%d request failed!\n", __func__, id);
-
- return timer;
+ return _omap_dm_timer_request(REQUEST_BY_ID, &id);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
*/
struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap)
{
- struct omap_dm_timer *timer = NULL, *t;
- unsigned long flags;
+ return _omap_dm_timer_request(REQUEST_BY_CAP, &cap);
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
- if (!cap)
+/**
+ * omap_dm_timer_request_by_node - Request a timer by device-tree node
+ * @np: Pointer to device-tree timer node
+ *
+ * Request a timer based upon a device node pointer. Returns pointer to
+ * timer handle on success and a NULL pointer on failure.
+ */
+struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np)
+{
+ if (!np)
return NULL;
- spin_lock_irqsave(&dm_timer_lock, flags);
- list_for_each_entry(t, &omap_timer_list, node) {
- if ((!t->reserved) && ((t->capability & cap) == cap)) {
- /*
- * If timer is not NULL, we have already found one timer
- * but it was not an exact match because it had more
- * capabilites that what was required. Therefore,
- * unreserve the last timer found and see if this one
- * is a better match.
- */
- if (timer)
- timer->reserved = 0;
-
- timer = t;
- timer->reserved = 1;
-
- /* Exit loop early if we find an exact match */
- if (t->capability == cap)
- break;
- }
- }
- spin_unlock_irqrestore(&dm_timer_lock, flags);
-
- if (timer && omap_dm_timer_prepare(timer)) {
- timer->reserved = 0;
- timer = NULL;
- }
-
- if (!timer)
- pr_debug("%s: timer request failed!\n", __func__);
-
- return timer;
+ return _omap_dm_timer_request(REQUEST_BY_NODE, np);
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_cap);
+EXPORT_SYMBOL_GPL(omap_dm_timer_request_by_node);
int omap_dm_timer_free(struct omap_dm_timer *timer)
{
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
+ int c;
+
pm_runtime_get_sync(&timer->pdev->dev);
+
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (timer->get_context_loss_count) {
+ c = timer->get_context_loss_count(&timer->pdev->dev);
+ if (c != timer->ctx_loss_count) {
+ omap_timer_restore_context(timer);
+ timer->ctx_loss_count = c;
+ }
+ } else {
+ omap_timer_restore_context(timer);
+ }
+ }
}
EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
omap_dm_timer_enable(timer);
- if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (timer->get_context_loss_count &&
- timer->get_context_loss_count(&timer->pdev->dev) !=
- timer->ctx_loss_count)
- omap_timer_restore_context(timer);
- }
-
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (!(l & OMAP_TIMER_CTRL_ST)) {
l |= OMAP_TIMER_CTRL_ST;
__omap_dm_timer_stop(timer, timer->posted, rate);
- if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (timer->get_context_loss_count)
- timer->ctx_loss_count =
- timer->get_context_loss_count(&timer->pdev->dev);
- }
-
/*
* Since the register values are computed and written within
* __omap_dm_timer_stop, we need to use read to retrieve the
omap_dm_timer_enable(timer);
- if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (timer->get_context_loss_count &&
- timer->get_context_loss_count(&timer->pdev->dev) !=
- timer->ctx_loss_count)
- omap_timer_restore_context(timer);
- }
-
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload) {
l |= OMAP_TIMER_CTRL_AR;
}
EXPORT_SYMBOL_GPL(omap_dm_timers_active);
+static const struct of_device_id omap_timer_match[];
+
/**
* omap_dm_timer_probe - probe function called for every registered device
* @pdev: pointer to current timer platform device
struct omap_dm_timer *timer;
struct resource *mem, *irq;
struct device *dev = &pdev->dev;
- struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+ const struct of_device_id *match;
+ const struct dmtimer_platform_data *pdata;
+
+ match = of_match_device(of_match_ptr(omap_timer_match), dev);
+ pdata = match ? match->data : dev->platform_data;
if (!pdata && !dev->of_node) {
dev_err(dev, "%s: no platform data.\n", __func__);
timer->capability |= OMAP_TIMER_SECURE;
} else {
timer->id = pdev->id;
- timer->errata = pdata->timer_errata;
timer->capability = pdata->timer_capability;
timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->get_context_loss_count = pdata->get_context_loss_count;
}
+ if (pdata)
+ timer->errata = pdata->timer_errata;
+
timer->irq = irq->start;
timer->pdev = pdev;
return ret;
}
+static const struct dmtimer_platform_data omap3plus_pdata = {
+ .timer_errata = OMAP_TIMER_ERRATA_I103_I767,
+};
+
static const struct of_device_id omap_timer_match[] = {
- { .compatible = "ti,omap2-timer", },
+ {
+ .compatible = "ti,omap2420-timer",
+ },
+ {
+ .compatible = "ti,omap3430-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,omap4430-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,omap5430-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,am335x-timer",
+ .data = &omap3plus_pdata,
+ },
+ {
+ .compatible = "ti,am335x-timer-1ms",
+ .data = &omap3plus_pdata,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_timer_match);
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
struct omap_dm_timer *omap_dm_timer_request_by_cap(u32 cap);
+struct omap_dm_timer *omap_dm_timer_request_by_node(struct device_node *np);
int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
- select SAMSUNG_CLKSRC
+ select SAMSUNG_CLKSRC if !COMMON_CLK
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
help
# timer options
-config S5P_HRT
+config SAMSUNG_HRT
bool
select SAMSUNG_DEV_PWM
help
used by newer systems such as the S3C64XX.
config S5P_CLOCK
- def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
help
Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
-obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
+obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
-/* timer for 2410/2440 */
-
-extern void s3c24xx_timer_init(void);
-
extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
- unsigned int parentbit,
- int subcheck)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
- /* check to see if we need to mask the parent IRQ */
-
- if ((submask & subcheck) == subcheck)
- __raw_writel(mask | parentbit, S3C2410_INTMSK);
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
- unsigned int parentbit)
-{
- unsigned long mask;
- unsigned long submask;
-
- submask = __raw_readl(S3C2410_INTSUBMSK);
- mask = __raw_readl(S3C2410_INTMSK);
-
- submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
- mask &= ~parentbit;
-
- /* write back masks */
- __raw_writel(submask, S3C2410_INTSUBMSK);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- s3c_irqsub_mask(irqno, parentmask, group);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
- unsigned int parentmask,
- unsigned int group)
-{
- unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
- __raw_writel(bit, S3C2410_SUBSRCPND);
-
- /* only ack parent if we've got all the irqs (seems we must
- * ack, all and hope that the irq system retriggers ok when
- * the interrupt goes off again)
- */
-
- if (1) {
- __raw_writel(parentmask, S3C2410_SRCPND);
- __raw_writel(parentmask, S3C2410_INTPND);
- }
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern int s3c2410_init(void);
-extern int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-
-extern void s3c2416_init_irq(void);
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
+++ /dev/null
-/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
- S5P_PWM0,
- S5P_PWM1,
- S5P_PWM2,
- S5P_PWM3,
- S5P_PWM4,
-};
-
-struct s5p_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE 4
-
-#define TCNT_MAX 0xffffffff
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source);
-extern void s5p_timer_init(void);
-#endif /* __ASM_PLAT_S5P_TIME_H */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for samsung s3c and s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_SAMSUNG_TIME_H
+#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
+
+/* SAMSUNG HR-Timer Clock mode */
+enum samsung_timer_mode {
+ SAMSUNG_PWM0,
+ SAMSUNG_PWM1,
+ SAMSUNG_PWM2,
+ SAMSUNG_PWM3,
+ SAMSUNG_PWM4,
+};
+
+struct samsung_timer_source {
+ unsigned int event_id;
+ unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define SAMSUNG_TIMER_MIN_RANGE 4
+
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
+#define TCNT_MAX 0xffff
+#define TSCALER_DIV 25
+#define TDIV 50
+#define TSIZE 16
+#else
+#define TCNT_MAX 0xffffffff
+#define TSCALER_DIV 2
+#define TDIV 2
+#define TSIZE 32
+#endif
+
+#define NON_PERIODIC 0
+#define PERIODIC 1
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source);
+
+extern void __init samsung_timer_init(void);
+
+#endif /* __ASM_PLAT_SAMSUNG_TIME_H */
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * S5P - Common hr-timer support
+ * samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
static struct clk *tin_event;
static struct clk *tin_source;
static struct clk *tdiv_event;
static struct clk *tdiv_source;
static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
+static struct samsung_timer_source timer_source;
static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
+static void samsung_timer_resume(void);
-static void s5p_time_stop(enum s5p_timer_mode mode)
+static void samsung_time_stop(enum samsung_timer_mode mode)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~S3C2410_TCON_T0START;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~S3C2410_TCON_T1START;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~S3C2410_TCON_T2START;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~S3C2410_TCON_T3START;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~S3C2410_TCON_T4START;
break;
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
+static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
{
unsigned long tcon;
tcnt--;
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~(0x0f << 0);
tcon |= S3C2410_TCON_T0MANUALUPD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~(0x0f << 8);
tcon |= S3C2410_TCON_T1MANUALUPD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~(0x0f << 12);
tcon |= S3C2410_TCON_T2MANUALUPD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~(0x0f << 16);
tcon |= S3C2410_TCON_T3MANUALUPD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~(0x07 << 20);
tcon |= S3C2410_TCON_T4MANUALUPD;
break;
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
+static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon |= S3C2410_TCON_T0START;
tcon &= ~S3C2410_TCON_T0MANUALUPD;
tcon &= ~S3C2410_TCON_T0RELOAD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon |= S3C2410_TCON_T1START;
tcon &= ~S3C2410_TCON_T1MANUALUPD;
tcon &= ~S3C2410_TCON_T1RELOAD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon |= S3C2410_TCON_T2START;
tcon &= ~S3C2410_TCON_T2MANUALUPD;
tcon &= ~S3C2410_TCON_T2RELOAD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon |= S3C2410_TCON_T3START;
tcon &= ~S3C2410_TCON_T3MANUALUPD;
tcon &= ~S3C2410_TCON_T3RELOAD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon |= S3C2410_TCON_T4START;
tcon &= ~S3C2410_TCON_T4MANUALUPD;
__raw_writel(tcon, S3C2410_TCON);
}
-static int s5p_set_next_event(unsigned long cycles,
+static int samsung_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- s5p_time_setup(timer_source.event_id, cycles);
- s5p_time_start(timer_source.event_id, NON_PERIODIC);
+ samsung_time_setup(timer_source.event_id, cycles);
+ samsung_time_start(timer_source.event_id, NON_PERIODIC);
return 0;
}
-static void s5p_set_mode(enum clock_event_mode mode,
+static void samsung_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- s5p_time_stop(timer_source.event_id);
+ samsung_time_stop(timer_source.event_id);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
break;
case CLOCK_EVT_MODE_ONESHOT:
break;
case CLOCK_EVT_MODE_RESUME:
- s5p_timer_resume();
+ samsung_timer_resume();
break;
}
}
-static void s5p_timer_resume(void)
+static void samsung_timer_resume(void)
{
/* event timer restart */
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
/* source timer restart */
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
}
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source)
+void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source)
{
s3c_device_timer[event].dev.bus = &platform_bus_type;
s3c_device_timer[source].dev.bus = &platform_bus_type;
}
static struct clock_event_device time_event_device = {
- .name = "s5p_event_timer",
+ .name = "samsung_event_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
- .set_next_event = s5p_set_next_event,
- .set_mode = s5p_set_mode,
+ .set_next_event = samsung_set_next_event,
+ .set_mode = samsung_set_mode,
};
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
return IRQ_HANDLED;
}
-static struct irqaction s5p_clock_event_irq = {
- .name = "s5p_time_irq",
+static struct irqaction samsung_clock_event_irq = {
+ .name = "samsung_time_irq",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s5p_clock_event_isr,
+ .handler = samsung_clock_event_isr,
.dev_id = &time_event_device,
};
-static void __init s5p_clockevent_init(void)
+static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
tscaler = clk_get_parent(tdiv_event);
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
+ clk_set_rate(tscaler, pclk / TSCALER_DIV);
+ clk_set_rate(tdiv_event, pclk / TDIV);
clk_set_parent(tin_event, tdiv_event);
clock_rate = clk_get_rate(tin_event);
clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &s5p_clock_event_irq);
+ setup_irq(irq_number, &samsung_clock_event_irq);
}
-static void __iomem *s5p_timer_reg(void)
+static void __iomem *samsung_timer_reg(void)
{
unsigned long offset = 0;
switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
+ case SAMSUNG_PWM0:
+ case SAMSUNG_PWM1:
+ case SAMSUNG_PWM2:
+ case SAMSUNG_PWM3:
offset = (timer_source.source_id * 0x0c) + 0x14;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
offset = 0x40;
break;
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static u32 notrace s5p_read_sched_clock(void)
+static u32 notrace samsung_read_sched_clock(void)
{
- void __iomem *reg = s5p_timer_reg();
+ void __iomem *reg = samsung_timer_reg();
if (!reg)
return 0;
return ~__raw_readl(reg);
}
-static void __init s5p_clocksource_init(void)
+static void __init samsung_clocksource_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
pclk = clk_get_rate(timerclk);
- clk_set_rate(tdiv_source, pclk / 2);
+ clk_set_rate(tdiv_source, pclk / TDIV);
clk_set_parent(tin_source, tdiv_source);
clock_rate = clk_get_rate(tin_source);
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
- setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
+ setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
- if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
- panic("s5p_clocksource_timer: can't register clocksource\n");
+ if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
+ clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
+ panic("samsung_clocksource_timer: can't register clocksource\n");
}
-static void __init s5p_timer_resources(void)
+static void __init samsung_timer_resources(void)
{
unsigned long event_id = timer_source.event_id;
clk_enable(tin_source);
}
-void __init s5p_timer_init(void)
+void __init samsung_timer_init(void)
{
- s5p_timer_resources();
- s5p_clockevent_init();
- s5p_clocksource_init();
+ samsung_timer_resources();
+ samsung_clockevent_init();
+ samsung_clocksource_init();
}
+++ /dev/null
-/* linux/arch/arm/plat-samsung/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- * Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
- unsigned long den = pclk / 1000;
-
- return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
- unsigned long res;
-
- res = ticks * timer_usec_ticks;
- res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */
-
- return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static u32 s3c2410_gettimeoffset(void)
-{
- unsigned long tdone;
- unsigned long tval;
-
- /* work out how many ticks have gone since last timer interrupt */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- /* check to see if there is an interrupt pending */
-
- if (s3c24xx_ostimer_pending()) {
- /* re-read the timer, and try and fix up for the missed
- * interrupt. Note, the interrupt may go off before the
- * timer has re-loaded from wrapping.
- */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- if (tval != 0)
- tdone += timer_startval;
- }
-
- return timer_ticks_to_usec(tdone) * 1000;
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
- .name = "S3C2410 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
- machine_is_bast() || \
- machine_is_vr1000() || \
- machine_is_anubis() || \
- machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
- unsigned long tcon;
- unsigned long tcnt;
- unsigned long tcfg1;
- unsigned long tcfg0;
-
- tcnt = TICK_MAX; /* default value for tcnt */
-
- /* configure the system for whichever machine is in use */
-
- if (use_tclk1_12()) {
- /* timer is at 12MHz, scaler is 1 */
- timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
- tcnt = 12000000 / HZ;
-
- tcfg1 = __raw_readl(S3C2410_TCFG1);
- tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
- tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
- __raw_writel(tcfg1, S3C2410_TCFG1);
- } else {
- unsigned long pclk;
- struct clk *tscaler;
-
- /* for the h1940 (and others), we use the pclk from the core
- * to generate the timer values. since values around 50 to
- * 70MHz are not values we can directly generate the timer
- * value from, we need to pre-scale and divide before using it.
- *
- * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
- * (8.45 ticks per usec)
- */
-
- pclk = clk_get_rate(timerclk);
-
- /* configure clock tick */
-
- timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
- tscaler = clk_get_parent(tdiv);
-
- clk_set_rate(tscaler, pclk / 3);
- clk_set_rate(tdiv, pclk / 6);
- clk_set_parent(tin, tdiv);
-
- tcnt = clk_get_rate(tin) / HZ;
- }
-
- tcon = __raw_readl(S3C2410_TCON);
- tcfg0 = __raw_readl(S3C2410_TCFG0);
- tcfg1 = __raw_readl(S3C2410_TCFG1);
-
- /* timers reload after counting zero, so reduce the count by 1 */
-
- tcnt--;
-
- printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
- tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
- /* check to see if timer is within 16bit range... */
- if (tcnt > TICK_MAX) {
- panic("setup_timer: HZ is too small, cannot configure timer!");
- return;
- }
-
- __raw_writel(tcfg1, S3C2410_TCFG1);
- __raw_writel(tcfg0, S3C2410_TCFG0);
-
- timer_startval = tcnt;
- __raw_writel(tcnt, S3C2410_TCNTB(4));
-
- /* ensure timer is stopped... */
-
- tcon &= ~(7<<20);
- tcon |= S3C2410_TCON_T4RELOAD;
- tcon |= S3C2410_TCON_T4MANUALUPD;
-
- __raw_writel(tcon, S3C2410_TCON);
- __raw_writel(tcnt, S3C2410_TCNTB(4));
- __raw_writel(tcnt, S3C2410_TCMPB(4));
-
- /* start the timer running */
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
- struct platform_device tmpdev;
-
- tmpdev.dev.bus = &platform_bus_type;
- tmpdev.id = 4;
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get clock for system timer");
-
- clk_enable(timerclk);
-
- if (!use_tclk1_12()) {
- tmpdev.id = 4;
- tmpdev.dev.init_name = "s3c24xx-pwm.4";
- tin = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin))
- panic("failed to get pwm-tin clock for system timer");
-
- tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv))
- panic("failed to get pwm-tdiv clock for system timer");
- }
-
- clk_enable(tin);
-}
-
-static struct syscore_ops s3c24xx_syscore_ops = {
- .resume = s3c2410_timer_setup,
-};
-
-void __init s3c24xx_timer_init(void)
-{
- arch_gettimeoffset = s3c2410_gettimeoffset;
-
- s3c2410_timer_resources();
- s3c2410_timer_setup();
- setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
- register_syscore_ops(&s3c24xx_syscore_ops);
-}
void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
{
unsigned long size, mask;
- bool page64k = IS_ENABLED(ARM64_64K_PAGES);
+ bool page64k = IS_ENABLED(CONFIG_ARM64_64K_PAGES);
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
}
if (!need_resched()) {
- void (*idle)(void);
#ifdef CONFIG_SMP
min_xtp();
#endif
if (mark_idle)
(*mark_idle)(1);
- if (!idle)
- idle = default_idle;
- (*idle)();
+ default_idle();
if (mark_idle)
(*mark_idle)(0);
#ifdef CONFIG_SMP
#include <asm/code-patching.h>
#include <asm/machdep.h>
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
extern void epapr_ev_idle(void);
extern u32 epapr_ev_idle_start[];
+#endif
bool epapr_paravirt_enabled;
for (i = 0; i < (len / 4); i++) {
patch_instruction(epapr_hypercall_start + i, insts[i]);
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
patch_instruction(epapr_ev_idle_start + i, insts[i]);
+#endif
}
+#if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64)
if (of_get_property(hyper_node, "has-idle", NULL))
ppc_md.power_save = epapr_ev_idle;
+#endif
epapr_paravirt_enabled = true;
#endif /* __DISABLED__ */
-/*
- * r13 points to the PACA, r9 contains the saved CR,
- * r12 contain the saved SRR1, SRR0 is still ready for return
- * r3 has the faulting address
- * r9 - r13 are saved in paca->exslb.
- * r3 is saved in paca->slb_r3
- * We assume we aren't going to take any exceptions during this procedure.
- */
-_GLOBAL(slb_miss_realmode)
- mflr r10
-#ifdef CONFIG_RELOCATABLE
- mtctr r11
-#endif
-
- stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
- std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
-
- bl .slb_allocate_realmode
-
- /* All done -- return from exception. */
-
- ld r10,PACA_EXSLB+EX_LR(r13)
- ld r3,PACA_EXSLB+EX_R3(r13)
- lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-
- mtlr r10
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- 2f
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
- mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
-.machine pop
-
- RESTORE_PPR_PACA(PACA_EXSLB, r9)
- ld r9,PACA_EXSLB+EX_R9(r13)
- ld r10,PACA_EXSLB+EX_R10(r13)
- ld r11,PACA_EXSLB+EX_R11(r13)
- ld r12,PACA_EXSLB+EX_R12(r13)
- ld r13,PACA_EXSLB+EX_R13(r13)
- rfid
- b . /* prevent speculative execution */
-
-2: mfspr r11,SPRN_SRR0
- ld r10,PACAKBASE(r13)
- LOAD_HANDLER(r10,unrecov_slb)
- mtspr SPRN_SRR0,r10
- ld r10,PACAKMSR(r13)
- mtspr SPRN_SRR1,r10
- rfid
- b .
-
-unrecov_slb:
- EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
- DISABLE_INTS
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-#ifdef CONFIG_PPC_970_NAP
-power4_fixup_nap:
- andc r9,r9,r10
- std r9,TI_LOCAL_FLAGS(r11)
- ld r10,_LINK(r1) /* make idle task do the */
- std r10,_NIP(r1) /* equivalent of a blr */
- blr
-#endif
-
.align 7
.globl alignment_common
alignment_common:
/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r12 contain the saved SRR1, SRR0 is still ready for return
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(slb_miss_realmode)
+ mflr r10
+#ifdef CONFIG_RELOCATABLE
+ mtctr r11
+#endif
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate_realmode
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- 2f
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+ RESTORE_PPR_PACA(PACA_EXSLB, r9)
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+2: mfspr r11,SPRN_SRR0
+ ld r10,PACAKBASE(r13)
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ ld r10,PACAKMSR(r13)
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+ andc r9,r9,r10
+ std r9,TI_LOCAL_FLAGS(r11)
+ ld r10,_LINK(r1) /* make idle task do the */
+ std r10,_NIP(r1) /* equivalent of a blr */
+ blr
+#endif
+
+/*
* Hash table stuff
*/
.align 7
return _hypercall3(int, console_io, cmd, count, str);
}
-extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+extern int __must_check xen_physdev_op_compat(int, void *);
static inline int
HYPERVISOR_physdev_op(int cmd, void *arg)
{
int rc = _hypercall2(int, physdev_op, cmd, arg);
if (unlikely(rc == -ENOSYS))
- rc = HYPERVISOR_physdev_op_compat(cmd, arg);
+ rc = xen_physdev_op_compat(cmd, arg);
return rc;
}
#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
+#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
#define MSR_IA32_BBL_CR_CTL3 0x0000011e
struct microcode_intel ***mc_saved;
mc_saved = (struct microcode_intel ***)
- __pa_symbol(&mc_saved_data->mc_saved);
+ __pa_nodebug(&mc_saved_data->mc_saved);
for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
struct microcode_intel *p;
p = *(struct microcode_intel **)
- __pa(mc_saved_data->mc_saved + i);
- mc_saved_tmp[i] = (struct microcode_intel *)__pa(p);
+ __pa_nodebug(mc_saved_data->mc_saved + i);
+ mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p);
}
}
#endif
struct cpio_data cd;
long offset = 0;
#ifdef CONFIG_X86_32
- char *p = (char *)__pa_symbol(ucode_name);
+ char *p = (char *)__pa_nodebug(ucode_name);
#else
char *p = ucode_name;
#endif
if (mc_intel == NULL)
return;
- delay_ucode_info_p = (int *)__pa_symbol(&delay_ucode_info);
- current_mc_date_p = (int *)__pa_symbol(¤t_mc_date);
+ delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
+ current_mc_date_p = (int *)__pa_nodebug(¤t_mc_date);
*delay_ucode_info_p = 1;
*current_mc_date_p = mc_intel->hdr.date;
}
#endif
-static int apply_microcode_early(struct mc_saved_data *mc_saved_data,
- struct ucode_cpu_info *uci)
+static int __cpuinit apply_microcode_early(struct mc_saved_data *mc_saved_data,
+ struct ucode_cpu_info *uci)
{
struct microcode_intel *mc_intel;
unsigned int val[2];
#ifdef CONFIG_X86_32
struct boot_params *boot_params_p;
- boot_params_p = (struct boot_params *)__pa_symbol(&boot_params);
+ boot_params_p = (struct boot_params *)__pa_nodebug(&boot_params);
ramdisk_image = boot_params_p->hdr.ramdisk_image;
ramdisk_size = boot_params_p->hdr.ramdisk_size;
initrd_start_early = ramdisk_image;
initrd_end_early = initrd_start_early + ramdisk_size;
_load_ucode_intel_bsp(
- (struct mc_saved_data *)__pa_symbol(&mc_saved_data),
- (unsigned long *)__pa_symbol(&mc_saved_in_initrd),
+ (struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+ (unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
initrd_start_early, initrd_end_early, &uci);
#else
ramdisk_image = boot_params.hdr.ramdisk_image;
unsigned long *initrd_start_p;
mc_saved_in_initrd_p =
- (unsigned long *)__pa_symbol(mc_saved_in_initrd);
- mc_saved_data_p = (struct mc_saved_data *)__pa_symbol(&mc_saved_data);
- initrd_start_p = (unsigned long *)__pa_symbol(&initrd_start);
- initrd_start_addr = (unsigned long)__pa_symbol(*initrd_start_p);
+ (unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+ mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
+ initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+ initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
#else
mc_saved_data_p = &mc_saved_data;
mc_saved_in_initrd_p = mc_saved_in_initrd;
char c;
unsigned zero_len;
- for (; len; --len) {
+ for (; len; --len, to++) {
if (__get_user_nocheck(c, from++, sizeof(char)))
break;
- if (__put_user_nocheck(c, to++, sizeof(char)))
+ if (__put_user_nocheck(c, to, sizeof(char)))
break;
}
__xen_write_cr3(true, cr3);
xen_mc_issue(PARAVIRT_LAZY_CPU); /* interrupts restored */
-
- pv_mmu_ops.write_cr3 = &xen_write_cr3;
}
#endif
#endif
#ifdef CONFIG_X86_64
+ pv_mmu_ops.write_cr3 = &xen_write_cr3;
SetPagePinned(virt_to_page(level3_user_vsyscall));
#endif
xen_mark_init_mm_pinned();
* copied from blk_rq_pos(rq).
*/
if (error_sector)
- *error_sector = bio->bi_sector;
+ *error_sector = bio->bi_sector;
if (!bio_flagged(bio, BIO_UPTODATE))
ret = -EIO;
hd_struct_put(part);
}
+EXPORT_SYMBOL(delete_partition);
static ssize_t whole_disk_show(struct device *dev,
struct device_attribute *attr, char *buf)
return rc;
data_len = estatus->data_length;
gdata = (struct acpi_hest_generic_data *)(estatus + 1);
- while (data_len > sizeof(*gdata)) {
+ while (data_len >= sizeof(*gdata)) {
gedata_len = gdata->error_data_length;
if (gedata_len > data_len - sizeof(*gdata))
return -EINVAL;
static void handle_root_bridge_removal(struct acpi_device *device)
{
+ acpi_status status;
struct acpi_eject_event *ej_event;
ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
ej_event->device = device;
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
- acpi_bus_hot_remove_device(ej_event);
+ status = acpi_os_hotplug_execute(acpi_bus_hot_remove_device, ej_event);
+ if (ACPI_FAILURE(status))
+ kfree(ej_event);
}
static void _handle_hotplug_event_root(struct work_struct *work)
handle = hp_work->handle;
type = hp_work->type;
- root = acpi_pci_find_root(handle);
+ acpi_scan_lock_acquire();
+ root = acpi_pci_find_root(handle);
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
switch (type) {
break;
}
+ acpi_scan_lock_release();
kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
kfree(buffer.pointer);
}
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW21M",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VPCEB17FX",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
If unsure, say N.
config BLK_DEV_RSXX
- tristate "RamSam PCIe Flash SSD Device Driver"
+ tristate "IBM FlashSystem 70/80 PCIe SSD Device Driver"
depends on PCI
help
Device driver for IBM's high speed PCIe SSD
- storage devices: RamSan-70 and RamSan-80.
+ storage devices: FlashSystem-70 and FlashSystem-80.
To compile this driver as a module, choose M here: the
module will be called rsxx.
if (rc)
return rc;
h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
- cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable));
+ cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
if (!h->cfgtable)
return -ENOMEM;
rc = write_driver_ver_to_cfgtable(h->cfgtable);
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev)
- ioctl_by_bdev(bdev, BLKRRPART, 0);
lo->lo_flags = 0;
if (!part_shift)
lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
mutex_unlock(&lo->lo_ctl_mutex);
+
+ /*
+ * Remove all partitions, since BLKRRPART won't remove user
+ * added partitions when max_part=0
+ */
+ if (bdev) {
+ struct disk_part_iter piter;
+ struct hd_struct *part;
+
+ mutex_lock_nested(&bdev->bd_mutex, 1);
+ invalidate_partition(bdev->bd_disk, 0);
+ disk_part_iter_init(&piter, bdev->bd_disk,
+ DISK_PITER_INCL_EMPTY);
+ while ((part = disk_part_iter_next(&piter)))
+ delete_partition(bdev->bd_disk, part->partno);
+ disk_part_iter_exit(&piter);
+ mutex_unlock(&bdev->bd_mutex);
+ }
+
/*
* Need not hold lo_ctl_mutex to fput backing file.
* Calling fput holding lo_ctl_mutex triggers a circular
goto out_free_dev;
i = err;
+ err = -ENOMEM;
lo->lo_queue = blk_alloc_queue(GFP_KERNEL);
if (!lo->lo_queue)
goto out_free_dev;
gpio_direction_output(host->rst, 1);
/* reset out pin */
- if (!(prv_data->dev_attr & MG_DEV_MASK))
+ if (!(prv_data->dev_attr & MG_DEV_MASK)) {
+ err = -EINVAL;
goto probe_err_3a;
+ }
if (prv_data->dev_attr != MG_BOOT_DEV) {
rsc = platform_get_resource_byname(plat_dev, IORESOURCE_IO,
dd->isr_workq = create_workqueue(dd->workq_name);
if (!dd->isr_workq) {
dev_warn(&pdev->dev, "Can't create wq %d\n", dd->instance);
+ rv = -ENOMEM;
goto block_initialize_err;
}
INIT_WORK(&dd->work[7].work, mtip_workq_sdbf7);
pci_set_master(pdev);
- if (pci_enable_msi(pdev)) {
+ rv = pci_enable_msi(pdev);
+ if (rv) {
dev_warn(&pdev->dev,
"Unable to enable MSI interrupt.\n");
goto block_initialize_err;
return atomic_read(&obj_request->done) != 0;
}
+static void
+rbd_img_obj_request_read_callback(struct rbd_obj_request *obj_request)
+{
+ dout("%s: obj %p img %p result %d %llu/%llu\n", __func__,
+ obj_request, obj_request->img_request, obj_request->result,
+ obj_request->xferred, obj_request->length);
+ /*
+ * ENOENT means a hole in the image. We zero-fill the
+ * entire length of the request. A short read also implies
+ * zero-fill to the end of the request. Either way we
+ * update the xferred count to indicate the whole request
+ * was satisfied.
+ */
+ BUG_ON(obj_request->type != OBJ_REQUEST_BIO);
+ if (obj_request->result == -ENOENT) {
+ zero_bio_chain(obj_request->bio_list, 0);
+ obj_request->result = 0;
+ obj_request->xferred = obj_request->length;
+ } else if (obj_request->xferred < obj_request->length &&
+ !obj_request->result) {
+ zero_bio_chain(obj_request->bio_list, obj_request->xferred);
+ obj_request->xferred = obj_request->length;
+ }
+ obj_request_done_set(obj_request);
+}
+
static void rbd_obj_request_complete(struct rbd_obj_request *obj_request)
{
dout("%s: obj %p cb %p\n", __func__, obj_request,
{
dout("%s: obj %p result %d %llu/%llu\n", __func__, obj_request,
obj_request->result, obj_request->xferred, obj_request->length);
- /*
- * ENOENT means a hole in the object. We zero-fill the
- * entire length of the request. A short read also implies
- * zero-fill to the end of the request. Either way we
- * update the xferred count to indicate the whole request
- * was satisfied.
- */
- if (obj_request->result == -ENOENT) {
- zero_bio_chain(obj_request->bio_list, 0);
- obj_request->result = 0;
- obj_request->xferred = obj_request->length;
- } else if (obj_request->xferred < obj_request->length &&
- !obj_request->result) {
- zero_bio_chain(obj_request->bio_list, obj_request->xferred);
- obj_request->xferred = obj_request->length;
- }
- obj_request_done_set(obj_request);
+ if (obj_request->img_request)
+ rbd_img_obj_request_read_callback(obj_request);
+ else
+ obj_request_done_set(obj_request);
}
static void rbd_osd_write_callback(struct rbd_obj_request *obj_request)
obj-$(CONFIG_BLK_DEV_RSXX) += rsxx.o
-rsxx-y := config.o core.o cregs.o dev.o dma.o
+rsxx-objs := config.o core.o cregs.o dev.o dma.o
#include "rsxx_priv.h"
#include "rsxx_cfg.h"
-static void initialize_config(void *config)
+static void initialize_config(struct rsxx_card_cfg *cfg)
{
- struct rsxx_card_cfg *cfg = config;
-
cfg->hdr.version = RSXX_CFG_VERSION;
cfg->data.block_size = RSXX_HW_BLK_SIZE;
cfg->data.stripe_size = RSXX_HW_BLK_SIZE;
- cfg->data.vendor_id = RSXX_VENDOR_ID_TMS_IBM;
+ cfg->data.vendor_id = RSXX_VENDOR_ID_IBM;
cfg->data.cache_order = (-1);
cfg->data.intr_coal.mode = RSXX_INTR_COAL_DISABLED;
cfg->data.intr_coal.count = 0;
} else {
dev_info(CARD_TO_DEV(card),
"Initializing card configuration.\n");
- initialize_config(card);
+ initialize_config(&card->config);
st = rsxx_save_config(card);
if (st)
return st;
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <linux/genhd.h>
#include <linux/idr.h>
#define NO_LEGACY 0
-MODULE_DESCRIPTION("IBM RamSan PCIe Flash SSD Device Driver");
-MODULE_AUTHOR("IBM <support@ramsan.com>");
+MODULE_DESCRIPTION("IBM FlashSystem 70/80 PCIe SSD Device Driver");
+MODULE_AUTHOR("Joshua Morris/Philip Kelleher, IBM");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
static DEFINE_SPINLOCK(rsxx_ida_lock);
/*----------------- Interrupt Control & Handling -------------------*/
+
+static void rsxx_mask_interrupts(struct rsxx_cardinfo *card)
+{
+ card->isr_mask = 0;
+ card->ier_mask = 0;
+}
+
static void __enable_intr(unsigned int *mask, unsigned int intr)
{
*mask |= intr;
*/
void rsxx_enable_ier(struct rsxx_cardinfo *card, unsigned int intr)
{
- if (unlikely(card->halt))
+ if (unlikely(card->halt) ||
+ unlikely(card->eeh_state))
return;
__enable_intr(&card->ier_mask, intr);
void rsxx_disable_ier(struct rsxx_cardinfo *card, unsigned int intr)
{
+ if (unlikely(card->eeh_state))
+ return;
+
__disable_intr(&card->ier_mask, intr);
iowrite32(card->ier_mask, card->regmap + IER);
}
void rsxx_enable_ier_and_isr(struct rsxx_cardinfo *card,
unsigned int intr)
{
- if (unlikely(card->halt))
+ if (unlikely(card->halt) ||
+ unlikely(card->eeh_state))
return;
__enable_intr(&card->isr_mask, intr);
void rsxx_disable_ier_and_isr(struct rsxx_cardinfo *card,
unsigned int intr)
{
+ if (unlikely(card->eeh_state))
+ return;
+
__disable_intr(&card->isr_mask, intr);
__disable_intr(&card->ier_mask, intr);
iowrite32(card->ier_mask, card->regmap + IER);
do {
reread_isr = 0;
+ if (unlikely(card->eeh_state))
+ break;
+
isr = ioread32(card->regmap + ISR);
if (isr == 0xffffffff) {
/*
}
/*----------------- Card Event Handler -------------------*/
-static char *rsxx_card_state_to_str(unsigned int state)
+static const char * const rsxx_card_state_to_str(unsigned int state)
{
- static char *state_strings[] = {
+ static const char * const state_strings[] = {
"Unknown", "Shutdown", "Starting", "Formatting",
"Uninitialized", "Good", "Shutting Down",
"Fault", "Read Only Fault", "dStroying"
return 0;
}
+static int rsxx_eeh_frozen(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ int i;
+ int st;
+
+ dev_warn(&dev->dev, "IBM FlashSystem PCI: preparing for slot reset.\n");
+
+ card->eeh_state = 1;
+ rsxx_mask_interrupts(card);
+
+ /*
+ * We need to guarantee that the write for eeh_state and masking
+ * interrupts does not become reordered. This will prevent a possible
+ * race condition with the EEH code.
+ */
+ wmb();
+
+ pci_disable_device(dev);
+
+ st = rsxx_eeh_save_issued_dmas(card);
+ if (st)
+ return st;
+
+ rsxx_eeh_save_issued_creg(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ if (card->ctrl[i].status.buf)
+ pci_free_consistent(card->dev, STATUS_BUFFER_SIZE8,
+ card->ctrl[i].status.buf,
+ card->ctrl[i].status.dma_addr);
+ if (card->ctrl[i].cmd.buf)
+ pci_free_consistent(card->dev, COMMAND_BUFFER_SIZE8,
+ card->ctrl[i].cmd.buf,
+ card->ctrl[i].cmd.dma_addr);
+ }
+
+ return 0;
+}
+
+static void rsxx_eeh_failure(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ int i;
+
+ dev_err(&dev->dev, "IBM FlashSystem PCI: disabling failed card.\n");
+
+ card->eeh_state = 1;
+
+ for (i = 0; i < card->n_targets; i++)
+ del_timer_sync(&card->ctrl[i].activity_timer);
+
+ rsxx_eeh_cancel_dmas(card);
+}
+
+static int rsxx_eeh_fifo_flush_poll(struct rsxx_cardinfo *card)
+{
+ unsigned int status;
+ int iter = 0;
+
+ /* We need to wait for the hardware to reset */
+ while (iter++ < 10) {
+ status = ioread32(card->regmap + PCI_RECONFIG);
+
+ if (status & RSXX_FLUSH_BUSY) {
+ ssleep(1);
+ continue;
+ }
+
+ if (status & RSXX_FLUSH_TIMEOUT)
+ dev_warn(CARD_TO_DEV(card), "HW: flash controller timeout\n");
+ return 0;
+ }
+
+ /* Hardware failed resetting itself. */
+ return -1;
+}
+
+static pci_ers_result_t rsxx_error_detected(struct pci_dev *dev,
+ enum pci_channel_state error)
+{
+ int st;
+
+ if (dev->revision < RSXX_EEH_SUPPORT)
+ return PCI_ERS_RESULT_NONE;
+
+ if (error == pci_channel_io_perm_failure) {
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ st = rsxx_eeh_frozen(dev);
+ if (st) {
+ dev_err(&dev->dev, "Slot reset setup failed\n");
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t rsxx_slot_reset(struct pci_dev *dev)
+{
+ struct rsxx_cardinfo *card = pci_get_drvdata(dev);
+ unsigned long flags;
+ int i;
+ int st;
+
+ dev_warn(&dev->dev,
+ "IBM FlashSystem PCI: recovering from slot reset.\n");
+
+ st = pci_enable_device(dev);
+ if (st)
+ goto failed_hw_setup;
+
+ pci_set_master(dev);
+
+ st = rsxx_eeh_fifo_flush_poll(card);
+ if (st)
+ goto failed_hw_setup;
+
+ rsxx_dma_queue_reset(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ st = rsxx_hw_buffers_init(dev, &card->ctrl[i]);
+ if (st)
+ goto failed_hw_buffers_init;
+ }
+
+ if (card->config_valid)
+ rsxx_dma_configure(card);
+
+ /* Clears the ISR register from spurious interrupts */
+ st = ioread32(card->regmap + ISR);
+
+ card->eeh_state = 0;
+
+ st = rsxx_eeh_remap_dmas(card);
+ if (st)
+ goto failed_remap_dmas;
+
+ spin_lock_irqsave(&card->irq_lock, flags);
+ if (card->n_targets & RSXX_MAX_TARGETS)
+ rsxx_enable_ier_and_isr(card, CR_INTR_ALL_G);
+ else
+ rsxx_enable_ier_and_isr(card, CR_INTR_ALL_C);
+ spin_unlock_irqrestore(&card->irq_lock, flags);
+
+ rsxx_kick_creg_queue(card);
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ if (list_empty(&card->ctrl[i].queue)) {
+ spin_unlock(&card->ctrl[i].queue_lock);
+ continue;
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+
+ queue_work(card->ctrl[i].issue_wq,
+ &card->ctrl[i].issue_dma_work);
+ }
+
+ dev_info(&dev->dev, "IBM FlashSystem PCI: recovery complete.\n");
+
+ return PCI_ERS_RESULT_RECOVERED;
+
+failed_hw_buffers_init:
+failed_remap_dmas:
+ for (i = 0; i < card->n_targets; i++) {
+ if (card->ctrl[i].status.buf)
+ pci_free_consistent(card->dev,
+ STATUS_BUFFER_SIZE8,
+ card->ctrl[i].status.buf,
+ card->ctrl[i].status.dma_addr);
+ if (card->ctrl[i].cmd.buf)
+ pci_free_consistent(card->dev,
+ COMMAND_BUFFER_SIZE8,
+ card->ctrl[i].cmd.buf,
+ card->ctrl[i].cmd.dma_addr);
+ }
+failed_hw_setup:
+ rsxx_eeh_failure(dev);
+ return PCI_ERS_RESULT_DISCONNECT;
+
+}
+
/*----------------- Driver Initialization & Setup -------------------*/
/* Returns: 0 if the driver is compatible with the device
-1 if the driver is NOT compatible with the device */
spin_lock_init(&card->irq_lock);
card->halt = 0;
+ card->eeh_state = 0;
spin_lock_irq(&card->irq_lock);
rsxx_disable_ier_and_isr(card, CR_INTR_ALL);
rsxx_disable_ier_and_isr(card, CR_INTR_EVENT);
spin_unlock_irqrestore(&card->irq_lock, flags);
- /* Prevent work_structs from re-queuing themselves. */
- card->halt = 1;
-
cancel_work_sync(&card->event_work);
rsxx_destroy_dev(card);
spin_lock_irqsave(&card->irq_lock, flags);
rsxx_disable_ier_and_isr(card, CR_INTR_ALL);
spin_unlock_irqrestore(&card->irq_lock, flags);
+
+ /* Prevent work_structs from re-queuing themselves. */
+ card->halt = 1;
+
free_irq(dev->irq, card);
if (!force_legacy)
card_shutdown(card);
}
+static const struct pci_error_handlers rsxx_err_handler = {
+ .error_detected = rsxx_error_detected,
+ .slot_reset = rsxx_slot_reset,
+};
+
static DEFINE_PCI_DEVICE_TABLE(rsxx_pci_ids) = {
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS70_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS70D_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS80_FLASH)},
- {PCI_DEVICE(PCI_VENDOR_ID_TMS_IBM, PCI_DEVICE_ID_RS81_FLASH)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_FS70_FLASH)},
+ {PCI_DEVICE(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_FS80_FLASH)},
{0,},
};
.remove = rsxx_pci_remove,
.suspend = rsxx_pci_suspend,
.shutdown = rsxx_pci_shutdown,
+ .err_handler = &rsxx_err_handler,
};
static int __init rsxx_core_init(void)
#error Unknown endianess!!! Aborting...
#endif
-static void copy_to_creg_data(struct rsxx_cardinfo *card,
+static int copy_to_creg_data(struct rsxx_cardinfo *card,
int cnt8,
void *buf,
unsigned int stream)
int i = 0;
u32 *data = buf;
+ if (unlikely(card->eeh_state))
+ return -EIO;
+
for (i = 0; cnt8 > 0; i++, cnt8 -= 4) {
/*
* Firmware implementation makes it necessary to byte swap on
else
iowrite32(data[i], card->regmap + CREG_DATA(i));
}
+
+ return 0;
}
-static void copy_from_creg_data(struct rsxx_cardinfo *card,
+static int copy_from_creg_data(struct rsxx_cardinfo *card,
int cnt8,
void *buf,
unsigned int stream)
int i = 0;
u32 *data = buf;
+ if (unlikely(card->eeh_state))
+ return -EIO;
+
for (i = 0; cnt8 > 0; i++, cnt8 -= 4) {
/*
* Firmware implementation makes it necessary to byte swap on
else
data[i] = ioread32(card->regmap + CREG_DATA(i));
}
-}
-
-static struct creg_cmd *pop_active_cmd(struct rsxx_cardinfo *card)
-{
- struct creg_cmd *cmd;
- /*
- * Spin lock is needed because this can be called in atomic/interrupt
- * context.
- */
- spin_lock_bh(&card->creg_ctrl.lock);
- cmd = card->creg_ctrl.active_cmd;
- card->creg_ctrl.active_cmd = NULL;
- spin_unlock_bh(&card->creg_ctrl.lock);
-
- return cmd;
+ return 0;
}
static void creg_issue_cmd(struct rsxx_cardinfo *card, struct creg_cmd *cmd)
{
+ int st;
+
+ if (unlikely(card->eeh_state))
+ return;
+
iowrite32(cmd->addr, card->regmap + CREG_ADD);
iowrite32(cmd->cnt8, card->regmap + CREG_CNT);
if (cmd->op == CREG_OP_WRITE) {
- if (cmd->buf)
- copy_to_creg_data(card, cmd->cnt8,
- cmd->buf, cmd->stream);
+ if (cmd->buf) {
+ st = copy_to_creg_data(card, cmd->cnt8,
+ cmd->buf, cmd->stream);
+ if (st)
+ return;
+ }
}
- /*
- * Data copy must complete before initiating the command. This is
- * needed for weakly ordered processors (i.e. PowerPC), so that all
- * neccessary registers are written before we kick the hardware.
- */
- wmb();
+ if (unlikely(card->eeh_state))
+ return;
/* Setting the valid bit will kick off the command. */
iowrite32(cmd->op, card->regmap + CREG_CMD);
cmd->cb_private = cb_private;
cmd->status = 0;
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_add_tail(&cmd->list, &card->creg_ctrl.queue);
card->creg_ctrl.q_depth++;
creg_kick_queue(card);
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
return 0;
}
struct rsxx_cardinfo *card = (struct rsxx_cardinfo *) data;
struct creg_cmd *cmd;
- cmd = pop_active_cmd(card);
+ spin_lock(&card->creg_ctrl.lock);
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+ spin_unlock(&card->creg_ctrl.lock);
+
if (cmd == NULL) {
card->creg_ctrl.creg_stats.creg_timeout++;
dev_warn(CARD_TO_DEV(card),
if (del_timer_sync(&card->creg_ctrl.cmd_timer) == 0)
card->creg_ctrl.creg_stats.failed_cancel_timer++;
- cmd = pop_active_cmd(card);
+ spin_lock_bh(&card->creg_ctrl.lock);
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+ spin_unlock_bh(&card->creg_ctrl.lock);
+
if (cmd == NULL) {
dev_err(CARD_TO_DEV(card),
"Spurious creg interrupt!\n");
goto creg_done;
}
- copy_from_creg_data(card, cnt8, cmd->buf, cmd->stream);
+ st = copy_from_creg_data(card, cnt8, cmd->buf, cmd->stream);
}
creg_done:
kmem_cache_free(creg_cmd_pool, cmd);
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
card->creg_ctrl.active = 0;
creg_kick_queue(card);
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
}
static void creg_reset(struct rsxx_cardinfo *card)
"Resetting creg interface for recovery\n");
/* Cancel outstanding commands */
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_for_each_entry_safe(cmd, tmp, &card->creg_ctrl.queue, list) {
list_del(&cmd->list);
card->creg_ctrl.q_depth--;
card->creg_ctrl.active = 0;
}
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
card->creg_ctrl.reset = 0;
spin_lock_irqsave(&card->irq_lock, flags);
return st;
/*
- * This timeout is neccessary for unresponsive hardware. The additional
+ * This timeout is necessary for unresponsive hardware. The additional
* 20 seconds to used to guarantee that each cregs requests has time to
* complete.
*/
- timeout = msecs_to_jiffies((CREG_TIMEOUT_MSEC *
- card->creg_ctrl.q_depth) + 20000);
+ timeout = msecs_to_jiffies(CREG_TIMEOUT_MSEC *
+ card->creg_ctrl.q_depth + 20000);
/*
* The creg interface is guaranteed to complete. It has a timeout
return 0;
}
+void rsxx_eeh_save_issued_creg(struct rsxx_cardinfo *card)
+{
+ struct creg_cmd *cmd = NULL;
+
+ cmd = card->creg_ctrl.active_cmd;
+ card->creg_ctrl.active_cmd = NULL;
+
+ if (cmd) {
+ del_timer_sync(&card->creg_ctrl.cmd_timer);
+
+ spin_lock_bh(&card->creg_ctrl.lock);
+ list_add(&cmd->list, &card->creg_ctrl.queue);
+ card->creg_ctrl.q_depth++;
+ card->creg_ctrl.active = 0;
+ spin_unlock_bh(&card->creg_ctrl.lock);
+ }
+}
+
+void rsxx_kick_creg_queue(struct rsxx_cardinfo *card)
+{
+ spin_lock_bh(&card->creg_ctrl.lock);
+ if (!list_empty(&card->creg_ctrl.queue))
+ creg_kick_queue(card);
+ spin_unlock_bh(&card->creg_ctrl.lock);
+}
+
/*------------ Initialization & Setup --------------*/
int rsxx_creg_setup(struct rsxx_cardinfo *card)
{
int cnt = 0;
/* Cancel outstanding commands */
- spin_lock(&card->creg_ctrl.lock);
+ spin_lock_bh(&card->creg_ctrl.lock);
list_for_each_entry_safe(cmd, tmp, &card->creg_ctrl.queue, list) {
list_del(&cmd->list);
if (cmd->cb)
"Canceled active creg command\n");
kmem_cache_free(creg_cmd_pool, cmd);
}
- spin_unlock(&card->creg_ctrl.lock);
+ spin_unlock_bh(&card->creg_ctrl.lock);
cancel_work_sync(&card->creg_ctrl.done_work);
}
struct rsxx_dma {
struct list_head list;
u8 cmd;
- unsigned int laddr; /* Logical address on the ramsan */
+ unsigned int laddr; /* Logical address */
struct {
u32 off;
u32 cnt;
HW_STATUS_FAULT = 0x08,
};
-#define STATUS_BUFFER_SIZE8 4096
-#define COMMAND_BUFFER_SIZE8 4096
-
static struct kmem_cache *rsxx_dma_pool;
struct dma_tracker {
return tgt;
}
-static void rsxx_dma_queue_reset(struct rsxx_cardinfo *card)
+void rsxx_dma_queue_reset(struct rsxx_cardinfo *card)
{
/* Reset all DMA Command/Status Queues */
iowrite32(DMA_QUEUE_RESET, card->regmap + RESET);
u32 q_depth = 0;
u32 intr_coal;
- if (card->config.data.intr_coal.mode != RSXX_INTR_COAL_AUTO_TUNE)
+ if (card->config.data.intr_coal.mode != RSXX_INTR_COAL_AUTO_TUNE ||
+ unlikely(card->eeh_state))
return;
for (i = 0; i < card->n_targets; i++)
}
/*----------------- RSXX DMA Handling -------------------*/
-static void rsxx_complete_dma(struct rsxx_cardinfo *card,
+static void rsxx_complete_dma(struct rsxx_dma_ctrl *ctrl,
struct rsxx_dma *dma,
unsigned int status)
{
if (status & DMA_SW_ERR)
- printk_ratelimited(KERN_ERR
- "SW Error in DMA(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_sw_err++;
if (status & DMA_HW_FAULT)
- printk_ratelimited(KERN_ERR
- "HW Fault in DMA(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_hw_fault++;
if (status & DMA_CANCELLED)
- printk_ratelimited(KERN_ERR
- "DMA Cancelled(cmd x%02x, laddr x%08x)\n",
- dma->cmd, dma->laddr);
+ ctrl->stats.dma_cancelled++;
if (dma->dma_addr)
- pci_unmap_page(card->dev, dma->dma_addr, get_dma_size(dma),
+ pci_unmap_page(ctrl->card->dev, dma->dma_addr,
+ get_dma_size(dma),
dma->cmd == HW_CMD_BLK_WRITE ?
PCI_DMA_TODEVICE :
PCI_DMA_FROMDEVICE);
if (dma->cb)
- dma->cb(card, dma->cb_data, status ? 1 : 0);
+ dma->cb(ctrl->card, dma->cb_data, status ? 1 : 0);
kmem_cache_free(rsxx_dma_pool, dma);
}
if (requeue_cmd)
rsxx_requeue_dma(ctrl, dma);
else
- rsxx_complete_dma(ctrl->card, dma, status);
+ rsxx_complete_dma(ctrl, dma, status);
}
static void dma_engine_stalled(unsigned long data)
{
struct rsxx_dma_ctrl *ctrl = (struct rsxx_dma_ctrl *)data;
- if (atomic_read(&ctrl->stats.hw_q_depth) == 0)
+ if (atomic_read(&ctrl->stats.hw_q_depth) == 0 ||
+ unlikely(ctrl->card->eeh_state))
return;
if (ctrl->cmd.idx != ioread32(ctrl->regmap + SW_CMD_IDX)) {
ctrl = container_of(work, struct rsxx_dma_ctrl, issue_dma_work);
hw_cmd_buf = ctrl->cmd.buf;
- if (unlikely(ctrl->card->halt))
+ if (unlikely(ctrl->card->halt) ||
+ unlikely(ctrl->card->eeh_state))
return;
while (1) {
*/
if (unlikely(ctrl->card->dma_fault)) {
push_tracker(ctrl->trackers, tag);
- rsxx_complete_dma(ctrl->card, dma, DMA_CANCELLED);
+ rsxx_complete_dma(ctrl, dma, DMA_CANCELLED);
continue;
}
/* Let HW know we've queued commands. */
if (cmds_pending) {
- /*
- * We must guarantee that the CPU writes to 'ctrl->cmd.buf'
- * (which is in PCI-consistent system-memory) from the loop
- * above make it into the coherency domain before the
- * following PIO "trigger" updating the cmd.idx. A WMB is
- * sufficient. We need not explicitly CPU cache-flush since
- * the memory is a PCI-consistent (ie; coherent) mapping.
- */
- wmb();
-
atomic_add(cmds_pending, &ctrl->stats.hw_q_depth);
mod_timer(&ctrl->activity_timer,
jiffies + DMA_ACTIVITY_TIMEOUT);
+
+ if (unlikely(ctrl->card->eeh_state)) {
+ del_timer_sync(&ctrl->activity_timer);
+ return;
+ }
+
iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
}
}
hw_st_buf = ctrl->status.buf;
if (unlikely(ctrl->card->halt) ||
- unlikely(ctrl->card->dma_fault))
+ unlikely(ctrl->card->dma_fault) ||
+ unlikely(ctrl->card->eeh_state))
return;
count = le16_to_cpu(hw_st_buf[ctrl->status.idx].count);
if (status)
rsxx_handle_dma_error(ctrl, dma, status);
else
- rsxx_complete_dma(ctrl->card, dma, 0);
+ rsxx_complete_dma(ctrl, dma, 0);
push_tracker(ctrl->trackers, tag);
/*----------------- DMA Engine Initialization & Setup -------------------*/
+int rsxx_hw_buffers_init(struct pci_dev *dev, struct rsxx_dma_ctrl *ctrl)
+{
+ ctrl->status.buf = pci_alloc_consistent(dev, STATUS_BUFFER_SIZE8,
+ &ctrl->status.dma_addr);
+ ctrl->cmd.buf = pci_alloc_consistent(dev, COMMAND_BUFFER_SIZE8,
+ &ctrl->cmd.dma_addr);
+ if (ctrl->status.buf == NULL || ctrl->cmd.buf == NULL)
+ return -ENOMEM;
+
+ memset(ctrl->status.buf, 0xac, STATUS_BUFFER_SIZE8);
+ iowrite32(lower_32_bits(ctrl->status.dma_addr),
+ ctrl->regmap + SB_ADD_LO);
+ iowrite32(upper_32_bits(ctrl->status.dma_addr),
+ ctrl->regmap + SB_ADD_HI);
+
+ memset(ctrl->cmd.buf, 0x83, COMMAND_BUFFER_SIZE8);
+ iowrite32(lower_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_LO);
+ iowrite32(upper_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_HI);
+
+ ctrl->status.idx = ioread32(ctrl->regmap + HW_STATUS_CNT);
+ if (ctrl->status.idx > RSXX_MAX_OUTSTANDING_CMDS) {
+ dev_crit(&dev->dev, "Failed reading status cnt x%x\n",
+ ctrl->status.idx);
+ return -EINVAL;
+ }
+ iowrite32(ctrl->status.idx, ctrl->regmap + HW_STATUS_CNT);
+ iowrite32(ctrl->status.idx, ctrl->regmap + SW_STATUS_CNT);
+
+ ctrl->cmd.idx = ioread32(ctrl->regmap + HW_CMD_IDX);
+ if (ctrl->cmd.idx > RSXX_MAX_OUTSTANDING_CMDS) {
+ dev_crit(&dev->dev, "Failed reading cmd cnt x%x\n",
+ ctrl->status.idx);
+ return -EINVAL;
+ }
+ iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
+ iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
+
+ return 0;
+}
+
static int rsxx_dma_ctrl_init(struct pci_dev *dev,
struct rsxx_dma_ctrl *ctrl)
{
int i;
+ int st;
memset(&ctrl->stats, 0, sizeof(ctrl->stats));
- ctrl->status.buf = pci_alloc_consistent(dev, STATUS_BUFFER_SIZE8,
- &ctrl->status.dma_addr);
- ctrl->cmd.buf = pci_alloc_consistent(dev, COMMAND_BUFFER_SIZE8,
- &ctrl->cmd.dma_addr);
- if (ctrl->status.buf == NULL || ctrl->cmd.buf == NULL)
- return -ENOMEM;
-
ctrl->trackers = vmalloc(DMA_TRACKER_LIST_SIZE8);
if (!ctrl->trackers)
return -ENOMEM;
INIT_WORK(&ctrl->issue_dma_work, rsxx_issue_dmas);
INIT_WORK(&ctrl->dma_done_work, rsxx_dma_done);
- memset(ctrl->status.buf, 0xac, STATUS_BUFFER_SIZE8);
- iowrite32(lower_32_bits(ctrl->status.dma_addr),
- ctrl->regmap + SB_ADD_LO);
- iowrite32(upper_32_bits(ctrl->status.dma_addr),
- ctrl->regmap + SB_ADD_HI);
-
- memset(ctrl->cmd.buf, 0x83, COMMAND_BUFFER_SIZE8);
- iowrite32(lower_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_LO);
- iowrite32(upper_32_bits(ctrl->cmd.dma_addr), ctrl->regmap + CB_ADD_HI);
-
- ctrl->status.idx = ioread32(ctrl->regmap + HW_STATUS_CNT);
- if (ctrl->status.idx > RSXX_MAX_OUTSTANDING_CMDS) {
- dev_crit(&dev->dev, "Failed reading status cnt x%x\n",
- ctrl->status.idx);
- return -EINVAL;
- }
- iowrite32(ctrl->status.idx, ctrl->regmap + HW_STATUS_CNT);
- iowrite32(ctrl->status.idx, ctrl->regmap + SW_STATUS_CNT);
-
- ctrl->cmd.idx = ioread32(ctrl->regmap + HW_CMD_IDX);
- if (ctrl->cmd.idx > RSXX_MAX_OUTSTANDING_CMDS) {
- dev_crit(&dev->dev, "Failed reading cmd cnt x%x\n",
- ctrl->status.idx);
- return -EINVAL;
- }
- iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
- iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
-
- wmb();
+ st = rsxx_hw_buffers_init(dev, ctrl);
+ if (st)
+ return st;
return 0;
}
return 0;
}
-static int rsxx_dma_configure(struct rsxx_cardinfo *card)
+int rsxx_dma_configure(struct rsxx_cardinfo *card)
{
u32 intr_coal;
}
}
+int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card)
+{
+ int i;
+ int j;
+ int cnt;
+ struct rsxx_dma *dma;
+ struct list_head *issued_dmas;
+
+ issued_dmas = kzalloc(sizeof(*issued_dmas) * card->n_targets,
+ GFP_KERNEL);
+ if (!issued_dmas)
+ return -ENOMEM;
+
+ for (i = 0; i < card->n_targets; i++) {
+ INIT_LIST_HEAD(&issued_dmas[i]);
+ cnt = 0;
+ for (j = 0; j < RSXX_MAX_OUTSTANDING_CMDS; j++) {
+ dma = get_tracker_dma(card->ctrl[i].trackers, j);
+ if (dma == NULL)
+ continue;
+
+ if (dma->cmd == HW_CMD_BLK_WRITE)
+ card->ctrl[i].stats.writes_issued--;
+ else if (dma->cmd == HW_CMD_BLK_DISCARD)
+ card->ctrl[i].stats.discards_issued--;
+ else
+ card->ctrl[i].stats.reads_issued--;
+
+ list_add_tail(&dma->list, &issued_dmas[i]);
+ push_tracker(card->ctrl[i].trackers, j);
+ cnt++;
+ }
+
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_splice(&issued_dmas[i], &card->ctrl[i].queue);
+
+ atomic_sub(cnt, &card->ctrl[i].stats.hw_q_depth);
+ card->ctrl[i].stats.sw_q_depth += cnt;
+ card->ctrl[i].e_cnt = 0;
+
+ list_for_each_entry(dma, &card->ctrl[i].queue, list) {
+ if (dma->dma_addr)
+ pci_unmap_page(card->dev, dma->dma_addr,
+ get_dma_size(dma),
+ dma->cmd == HW_CMD_BLK_WRITE ?
+ PCI_DMA_TODEVICE :
+ PCI_DMA_FROMDEVICE);
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+
+ kfree(issued_dmas);
+
+ return 0;
+}
+
+void rsxx_eeh_cancel_dmas(struct rsxx_cardinfo *card)
+{
+ struct rsxx_dma *dma;
+ struct rsxx_dma *tmp;
+ int i;
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_for_each_entry_safe(dma, tmp, &card->ctrl[i].queue, list) {
+ list_del(&dma->list);
+
+ rsxx_complete_dma(&card->ctrl[i], dma, DMA_CANCELLED);
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+}
+
+int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card)
+{
+ struct rsxx_dma *dma;
+ int i;
+
+ for (i = 0; i < card->n_targets; i++) {
+ spin_lock(&card->ctrl[i].queue_lock);
+ list_for_each_entry(dma, &card->ctrl[i].queue, list) {
+ dma->dma_addr = pci_map_page(card->dev, dma->page,
+ dma->pg_off, get_dma_size(dma),
+ dma->cmd == HW_CMD_BLK_WRITE ?
+ PCI_DMA_TODEVICE :
+ PCI_DMA_FROMDEVICE);
+ if (!dma->dma_addr) {
+ spin_unlock(&card->ctrl[i].queue_lock);
+ kmem_cache_free(rsxx_dma_pool, dma);
+ return -ENOMEM;
+ }
+ }
+ spin_unlock(&card->ctrl[i].queue_lock);
+ }
+
+ return 0;
+}
int rsxx_dma_init(void)
{
/*----------------- IOCTL Definitions -------------------*/
+#define RSXX_MAX_DATA 8
+
struct rsxx_reg_access {
__u32 addr;
__u32 cnt;
__u32 stat;
__u32 stream;
- __u32 data[8];
+ __u32 data[RSXX_MAX_DATA];
};
-#define RSXX_MAX_REG_CNT (8 * (sizeof(__u32)))
+#define RSXX_MAX_REG_CNT (RSXX_MAX_DATA * (sizeof(__u32)))
#define RSXX_IOC_MAGIC 'r'
};
/* Vendor ID Values */
-#define RSXX_VENDOR_ID_TMS_IBM 0
+#define RSXX_VENDOR_ID_IBM 0
#define RSXX_VENDOR_ID_DSI 1
#define RSXX_VENDOR_COUNT 2
struct proc_cmd;
-#define PCI_VENDOR_ID_TMS_IBM 0x15B6
-#define PCI_DEVICE_ID_RS70_FLASH 0x0019
-#define PCI_DEVICE_ID_RS70D_FLASH 0x001A
-#define PCI_DEVICE_ID_RS80_FLASH 0x001C
-#define PCI_DEVICE_ID_RS81_FLASH 0x001E
+#define PCI_DEVICE_ID_FS70_FLASH 0x04A9
+#define PCI_DEVICE_ID_FS80_FLASH 0x04AA
#define RS70_PCI_REV_SUPPORTED 4
#define DRIVER_NAME "rsxx"
-#define DRIVER_VERSION "3.7"
+#define DRIVER_VERSION "4.0"
/* Block size is 4096 */
#define RSXX_HW_BLK_SHIFT 12
#define RSXX_MAX_OUTSTANDING_CMDS 255
#define RSXX_CS_IDX_MASK 0xff
+#define STATUS_BUFFER_SIZE8 4096
+#define COMMAND_BUFFER_SIZE8 4096
+
#define RSXX_MAX_TARGETS 8
struct dma_tracker_list;
u32 discards_failed;
u32 done_rescheduled;
u32 issue_rescheduled;
+ u32 dma_sw_err;
+ u32 dma_hw_fault;
+ u32 dma_cancelled;
u32 sw_q_depth; /* Number of DMAs on the SW queue. */
atomic_t hw_q_depth; /* Number of DMAs queued to HW. */
};
struct rsxx_cardinfo {
struct pci_dev *dev;
unsigned int halt;
+ unsigned int eeh_state;
void __iomem *regmap;
spinlock_t irq_lock;
PERF_RD512_HI = 0xac,
PERF_WR512_LO = 0xb0,
PERF_WR512_HI = 0xb4,
+ PCI_RECONFIG = 0xb8,
};
enum rsxx_intr {
CR_INTR_DMA5 = 0x00000080,
CR_INTR_DMA6 = 0x00000100,
CR_INTR_DMA7 = 0x00000200,
+ CR_INTR_ALL_C = 0x0000003f,
+ CR_INTR_ALL_G = 0x000003ff,
CR_INTR_DMA_ALL = 0x000003f5,
CR_INTR_ALL = 0xffffffff,
};
DMA_QUEUE_RESET = 0x00000001,
};
+enum rsxx_hw_fifo_flush {
+ RSXX_FLUSH_BUSY = 0x00000002,
+ RSXX_FLUSH_TIMEOUT = 0x00000004,
+};
+
enum rsxx_pci_revision {
RSXX_DISCARD_SUPPORT = 2,
+ RSXX_EEH_SUPPORT = 3,
};
enum rsxx_creg_cmd {
void rsxx_dma_destroy(struct rsxx_cardinfo *card);
int rsxx_dma_init(void);
void rsxx_dma_cleanup(void);
+void rsxx_dma_queue_reset(struct rsxx_cardinfo *card);
+int rsxx_dma_configure(struct rsxx_cardinfo *card);
int rsxx_dma_queue_bio(struct rsxx_cardinfo *card,
struct bio *bio,
atomic_t *n_dmas,
rsxx_dma_cb cb,
void *cb_data);
+int rsxx_hw_buffers_init(struct pci_dev *dev, struct rsxx_dma_ctrl *ctrl);
+int rsxx_eeh_save_issued_dmas(struct rsxx_cardinfo *card);
+void rsxx_eeh_cancel_dmas(struct rsxx_cardinfo *card);
+int rsxx_eeh_remap_dmas(struct rsxx_cardinfo *card);
/***** cregs.c *****/
int rsxx_creg_write(struct rsxx_cardinfo *card, u32 addr,
void rsxx_creg_destroy(struct rsxx_cardinfo *card);
int rsxx_creg_init(void);
void rsxx_creg_cleanup(void);
-
int rsxx_reg_access(struct rsxx_cardinfo *card,
struct rsxx_reg_access __user *ucmd,
int read);
+void rsxx_eeh_save_issued_creg(struct rsxx_cardinfo *card);
+void rsxx_kick_creg_queue(struct rsxx_cardinfo *card);
#define foreach_grant_safe(pos, n, rbtree, node) \
for ((pos) = container_of(rb_first((rbtree)), typeof(*(pos)), node), \
- (n) = rb_next(&(pos)->node); \
+ (n) = (&(pos)->node != NULL) ? rb_next(&(pos)->node) : NULL; \
&(pos)->node != NULL; \
(pos) = container_of(n, typeof(*(pos)), node), \
(n) = (&(pos)->node != NULL) ? rb_next(&(pos)->node) : NULL)
static void print_stats(struct xen_blkif *blkif)
{
- pr_info("xen-blkback (%s): oo %3d | rd %4d | wr %4d | f %4d"
- " | ds %4d\n",
+ pr_info("xen-blkback (%s): oo %3llu | rd %4llu | wr %4llu | f %4llu"
+ " | ds %4llu\n",
current->comm, blkif->st_oo_req,
blkif->st_rd_req, blkif->st_wr_req,
blkif->st_f_req, blkif->st_ds_req);
}
struct seg_buf {
- unsigned long buf;
+ unsigned int offset;
unsigned int nsec;
};
/*
* If this is a new persistent grant
* save the handler
*/
- persistent_gnts[i]->handle = map[j].handle;
- persistent_gnts[i]->dev_bus_addr =
- map[j++].dev_bus_addr;
+ persistent_gnts[i]->handle = map[j++].handle;
}
pending_handle(pending_req, i) =
persistent_gnts[i]->handle;
if (ret)
continue;
-
- seg[i].buf = persistent_gnts[i]->dev_bus_addr |
- (req->u.rw.seg[i].first_sect << 9);
} else {
- pending_handle(pending_req, i) = map[j].handle;
+ pending_handle(pending_req, i) = map[j++].handle;
bitmap_set(pending_req->unmap_seg, i, 1);
- if (ret) {
- j++;
+ if (ret)
continue;
- }
-
- seg[i].buf = map[j++].dev_bus_addr |
- (req->u.rw.seg[i].first_sect << 9);
}
+ seg[i].offset = (req->u.rw.seg[i].first_sect << 9);
}
return ret;
}
return err;
}
+static int dispatch_other_io(struct xen_blkif *blkif,
+ struct blkif_request *req,
+ struct pending_req *pending_req)
+{
+ free_req(pending_req);
+ make_response(blkif, req->u.other.id, req->operation,
+ BLKIF_RSP_EOPNOTSUPP);
+ return -EIO;
+}
+
static void xen_blk_drain_io(struct xen_blkif *blkif)
{
atomic_set(&blkif->drain, 1);
/* Apply all sanity checks to /private copy/ of request. */
barrier();
- if (unlikely(req.operation == BLKIF_OP_DISCARD)) {
+
+ switch (req.operation) {
+ case BLKIF_OP_READ:
+ case BLKIF_OP_WRITE:
+ case BLKIF_OP_WRITE_BARRIER:
+ case BLKIF_OP_FLUSH_DISKCACHE:
+ if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ case BLKIF_OP_DISCARD:
free_req(pending_req);
if (dispatch_discard_io(blkif, &req))
- break;
- } else if (dispatch_rw_block_io(blkif, &req, pending_req))
+ goto done;
break;
+ default:
+ if (dispatch_other_io(blkif, &req, pending_req))
+ goto done;
+ break;
+ }
/* Yield point for this unbounded loop. */
cond_resched();
}
-
+done:
return more_to_do;
}
pr_debug(DRV_PFX "access denied: %s of [%llu,%llu] on dev=%04x\n",
operation == READ ? "read" : "write",
preq.sector_number,
- preq.sector_number + preq.nr_sects, preq.dev);
+ preq.sector_number + preq.nr_sects,
+ blkif->vbd.pdevice);
goto fail_response;
}
(bio_add_page(bio,
pages[i],
seg[i].nsec << 9,
- seg[i].buf & ~PAGE_MASK) == 0)) {
+ seg[i].offset) == 0)) {
bio = bio_alloc(GFP_KERNEL, nseg-i);
if (unlikely(bio == NULL))
bio->bi_end_io = end_block_io_op;
}
- /*
- * We set it one so that the last submit_bio does not have to call
- * atomic_inc.
- */
atomic_set(&pending_req->pendcnt, nbio);
-
- /* Get a reference count for the disk queue and start sending I/O */
blk_start_plug(&plug);
for (i = 0; i < nbio; i++)
fail_put_bio:
for (i = 0; i < nbio; i++)
bio_put(biolist[i]);
+ atomic_set(&pending_req->pendcnt, 1);
__end_block_io_op(pending_req, -EINVAL);
msleep(1); /* back off a bit */
return -EIO;
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_32_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_32_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_32_request_rw rw;
struct blkif_x86_32_request_discard discard;
+ struct blkif_x86_32_request_other other;
} u;
} __attribute__((__packed__));
uint64_t nr_sectors;
} __attribute__((__packed__));
+struct blkif_x86_64_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2;
+ uint32_t _pad3; /* offsetof(blkif_..,u.discard.id)==8 */
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_x86_64_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_x86_64_request_rw rw;
struct blkif_x86_64_request_discard discard;
+ struct blkif_x86_64_request_other other;
} u;
} __attribute__((__packed__));
struct page *page;
grant_ref_t gnt;
grant_handle_t handle;
- uint64_t dev_bus_addr;
struct rb_node node;
};
/* statistics */
unsigned long st_print;
- int st_rd_req;
- int st_wr_req;
- int st_oo_req;
- int st_f_req;
- int st_ds_req;
- int st_rd_sect;
- int st_wr_sect;
+ unsigned long long st_rd_req;
+ unsigned long long st_wr_req;
+ unsigned long long st_oo_req;
+ unsigned long long st_f_req;
+ unsigned long long st_ds_req;
+ unsigned long long st_rd_sect;
+ unsigned long long st_wr_sect;
wait_queue_head_t waiting_to_free;
};
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
default:
+ /*
+ * Don't know how to translate this op. Only get the
+ * ID so failure can be reported to the frontend.
+ */
+ dst->u.other.id = src->u.other.id;
break;
}
}
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
-VBD_SHOW(oo_req, "%d\n", be->blkif->st_oo_req);
-VBD_SHOW(rd_req, "%d\n", be->blkif->st_rd_req);
-VBD_SHOW(wr_req, "%d\n", be->blkif->st_wr_req);
-VBD_SHOW(f_req, "%d\n", be->blkif->st_f_req);
-VBD_SHOW(ds_req, "%d\n", be->blkif->st_ds_req);
-VBD_SHOW(rd_sect, "%d\n", be->blkif->st_rd_sect);
-VBD_SHOW(wr_sect, "%d\n", be->blkif->st_wr_sect);
+VBD_SHOW(oo_req, "%llu\n", be->blkif->st_oo_req);
+VBD_SHOW(rd_req, "%llu\n", be->blkif->st_rd_req);
+VBD_SHOW(wr_req, "%llu\n", be->blkif->st_wr_req);
+VBD_SHOW(f_req, "%llu\n", be->blkif->st_f_req);
+VBD_SHOW(ds_req, "%llu\n", be->blkif->st_ds_req);
+VBD_SHOW(rd_sect, "%llu\n", be->blkif->st_rd_sect);
+VBD_SHOW(wr_sect, "%llu\n", be->blkif->st_wr_sect);
static struct attribute *xen_vbdstat_attrs[] = {
&dev_attr_oo_req.attr,
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/bitmap.h>
-#include <linux/llist.h>
+#include <linux/list.h>
#include <xen/xen.h>
#include <xen/xenbus.h>
struct grant {
grant_ref_t gref;
unsigned long pfn;
- struct llist_node node;
+ struct list_head node;
};
struct blk_shadow {
struct blkif_request req;
struct request *request;
- unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct grant *grants_used[BLKIF_MAX_SEGMENTS_PER_REQUEST];
};
struct work_struct work;
struct gnttab_free_callback callback;
struct blk_shadow shadow[BLK_RING_SIZE];
- struct llist_head persistent_gnts;
+ struct list_head persistent_gnts;
unsigned int persistent_gnts_c;
unsigned long shadow_free;
unsigned int feature_flush;
return 0;
}
+static int fill_grant_buffer(struct blkfront_info *info, int num)
+{
+ struct page *granted_page;
+ struct grant *gnt_list_entry, *n;
+ int i = 0;
+
+ while(i < num) {
+ gnt_list_entry = kzalloc(sizeof(struct grant), GFP_NOIO);
+ if (!gnt_list_entry)
+ goto out_of_memory;
+
+ granted_page = alloc_page(GFP_NOIO);
+ if (!granted_page) {
+ kfree(gnt_list_entry);
+ goto out_of_memory;
+ }
+
+ gnt_list_entry->pfn = page_to_pfn(granted_page);
+ gnt_list_entry->gref = GRANT_INVALID_REF;
+ list_add(&gnt_list_entry->node, &info->persistent_gnts);
+ i++;
+ }
+
+ return 0;
+
+out_of_memory:
+ list_for_each_entry_safe(gnt_list_entry, n,
+ &info->persistent_gnts, node) {
+ list_del(&gnt_list_entry->node);
+ __free_page(pfn_to_page(gnt_list_entry->pfn));
+ kfree(gnt_list_entry);
+ i--;
+ }
+ BUG_ON(i != 0);
+ return -ENOMEM;
+}
+
+static struct grant *get_grant(grant_ref_t *gref_head,
+ struct blkfront_info *info)
+{
+ struct grant *gnt_list_entry;
+ unsigned long buffer_mfn;
+
+ BUG_ON(list_empty(&info->persistent_gnts));
+ gnt_list_entry = list_first_entry(&info->persistent_gnts, struct grant,
+ node);
+ list_del(&gnt_list_entry->node);
+
+ if (gnt_list_entry->gref != GRANT_INVALID_REF) {
+ info->persistent_gnts_c--;
+ return gnt_list_entry;
+ }
+
+ /* Assign a gref to this page */
+ gnt_list_entry->gref = gnttab_claim_grant_reference(gref_head);
+ BUG_ON(gnt_list_entry->gref == -ENOSPC);
+ buffer_mfn = pfn_to_mfn(gnt_list_entry->pfn);
+ gnttab_grant_foreign_access_ref(gnt_list_entry->gref,
+ info->xbdev->otherend_id,
+ buffer_mfn, 0);
+ return gnt_list_entry;
+}
+
static const char *op_name(int op)
{
static const char *const names[] = {
static int blkif_queue_request(struct request *req)
{
struct blkfront_info *info = req->rq_disk->private_data;
- unsigned long buffer_mfn;
struct blkif_request *ring_req;
unsigned long id;
unsigned int fsect, lsect;
*/
bool new_persistent_gnts;
grant_ref_t gref_head;
- struct page *granted_page;
struct grant *gnt_list_entry = NULL;
struct scatterlist *sg;
fsect = sg->offset >> 9;
lsect = fsect + (sg->length >> 9) - 1;
- if (info->persistent_gnts_c) {
- BUG_ON(llist_empty(&info->persistent_gnts));
- gnt_list_entry = llist_entry(
- llist_del_first(&info->persistent_gnts),
- struct grant, node);
-
- ref = gnt_list_entry->gref;
- buffer_mfn = pfn_to_mfn(gnt_list_entry->pfn);
- info->persistent_gnts_c--;
- } else {
- ref = gnttab_claim_grant_reference(&gref_head);
- BUG_ON(ref == -ENOSPC);
-
- gnt_list_entry =
- kmalloc(sizeof(struct grant),
- GFP_ATOMIC);
- if (!gnt_list_entry)
- return -ENOMEM;
-
- granted_page = alloc_page(GFP_ATOMIC);
- if (!granted_page) {
- kfree(gnt_list_entry);
- return -ENOMEM;
- }
-
- gnt_list_entry->pfn =
- page_to_pfn(granted_page);
- gnt_list_entry->gref = ref;
-
- buffer_mfn = pfn_to_mfn(page_to_pfn(
- granted_page));
- gnttab_grant_foreign_access_ref(ref,
- info->xbdev->otherend_id,
- buffer_mfn, 0);
- }
+ gnt_list_entry = get_grant(&gref_head, info);
+ ref = gnt_list_entry->gref;
info->shadow[id].grants_used[i] = gnt_list_entry;
kunmap_atomic(shared_data);
}
- info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
ring_req->u.rw.seg[i] =
(struct blkif_request_segment) {
.gref = ref,
static void blkif_free(struct blkfront_info *info, int suspend)
{
- struct llist_node *all_gnts;
- struct grant *persistent_gnt, *tmp;
- struct llist_node *n;
+ struct grant *persistent_gnt;
+ struct grant *n;
/* Prevent new requests being issued until we fix things up. */
spin_lock_irq(&info->io_lock);
blk_stop_queue(info->rq);
/* Remove all persistent grants */
- if (info->persistent_gnts_c) {
- all_gnts = llist_del_all(&info->persistent_gnts);
- persistent_gnt = llist_entry(all_gnts, typeof(*(persistent_gnt)), node);
- while (persistent_gnt) {
- gnttab_end_foreign_access(persistent_gnt->gref, 0, 0UL);
+ if (!list_empty(&info->persistent_gnts)) {
+ list_for_each_entry_safe(persistent_gnt, n,
+ &info->persistent_gnts, node) {
+ list_del(&persistent_gnt->node);
+ if (persistent_gnt->gref != GRANT_INVALID_REF) {
+ gnttab_end_foreign_access(persistent_gnt->gref,
+ 0, 0UL);
+ info->persistent_gnts_c--;
+ }
__free_page(pfn_to_page(persistent_gnt->pfn));
- tmp = persistent_gnt;
- n = persistent_gnt->node.next;
- if (n)
- persistent_gnt = llist_entry(n, typeof(*(persistent_gnt)), node);
- else
- persistent_gnt = NULL;
- kfree(tmp);
+ kfree(persistent_gnt);
}
- info->persistent_gnts_c = 0;
}
+ BUG_ON(info->persistent_gnts_c != 0);
/* No more gnttab callback work. */
gnttab_cancel_free_callback(&info->callback);
}
/* Add the persistent grant into the list of free grants */
for (i = 0; i < s->req.u.rw.nr_segments; i++) {
- llist_add(&s->grants_used[i]->node, &info->persistent_gnts);
+ list_add(&s->grants_used[i]->node, &info->persistent_gnts);
info->persistent_gnts_c++;
}
}
sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ /* Allocate memory for grants */
+ err = fill_grant_buffer(info, BLK_RING_SIZE *
+ BLKIF_MAX_SEGMENTS_PER_REQUEST);
+ if (err)
+ goto fail;
+
err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
if (err < 0) {
free_page((unsigned long)sring);
spin_lock_init(&info->io_lock);
info->xbdev = dev;
info->vdevice = vdevice;
- init_llist_head(&info->persistent_gnts);
+ INIT_LIST_HEAD(&info->persistent_gnts);
info->persistent_gnts_c = 0;
info->connected = BLKIF_STATE_DISCONNECTED;
INIT_WORK(&info->work, blkif_restart_queue);
int j;
/* Stage 1: Make a safe copy of the shadow state. */
- copy = kmalloc(sizeof(info->shadow),
+ copy = kmemdup(info->shadow, sizeof(info->shadow),
GFP_NOIO | __GFP_REPEAT | __GFP_HIGH);
if (!copy)
return -ENOMEM;
- memcpy(copy, info->shadow, sizeof(info->shadow));
/* Stage 2: Set up free list. */
memset(&info->shadow, 0, sizeof(info->shadow));
gnttab_grant_foreign_access_ref(
req->u.rw.seg[j].gref,
info->xbdev->otherend_id,
- pfn_to_mfn(info->shadow[req->u.rw.id].frame[j]),
+ pfn_to_mfn(copy[i].grants_used[j]->pfn),
0);
}
info->shadow[req->u.rw.id].req = *req;
{ USB_DEVICE(0x03F0, 0x311D) },
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036) },
{ USB_DEVICE(0x0CF3, 0x3004) },
{ USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
+ { USB_DEVICE(0x0CF3, 0x817a) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3004) },
{ USB_DEVICE(0x04CA, 0x3005) },
static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros 3012 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
+config COMMON_CLK_AXI_CLKGEN
+ tristate "AXI clkgen driver"
+ depends on ARCH_ZYNQ || MICROBLAZE
+ help
+ ---help---
+ Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
+ FPGAs. It is commonly used in Analog Devices' reference designs.
+
endmenu
source "drivers/clk/mvebu/Kconfig"
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
+obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
obj-$(CONFIG_X86) += x86/
# Chip specific
+obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
--- /dev/null
+/*
+ * AXI clkgen driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define AXI_CLKGEN_REG_UPDATE_ENABLE 0x04
+#define AXI_CLKGEN_REG_CLK_OUT1 0x08
+#define AXI_CLKGEN_REG_CLK_OUT2 0x0c
+#define AXI_CLKGEN_REG_CLK_DIV 0x10
+#define AXI_CLKGEN_REG_CLK_FB1 0x14
+#define AXI_CLKGEN_REG_CLK_FB2 0x18
+#define AXI_CLKGEN_REG_LOCK1 0x1c
+#define AXI_CLKGEN_REG_LOCK2 0x20
+#define AXI_CLKGEN_REG_LOCK3 0x24
+#define AXI_CLKGEN_REG_FILTER1 0x28
+#define AXI_CLKGEN_REG_FILTER2 0x2c
+
+struct axi_clkgen {
+ void __iomem *base;
+ struct clk_hw clk_hw;
+};
+
+static uint32_t axi_clkgen_lookup_filter(unsigned int m)
+{
+ switch (m) {
+ case 0:
+ return 0x01001990;
+ case 1:
+ return 0x01001190;
+ case 2:
+ return 0x01009890;
+ case 3:
+ return 0x01001890;
+ case 4:
+ return 0x01008890;
+ case 5 ... 8:
+ return 0x01009090;
+ case 9 ... 11:
+ return 0x01000890;
+ case 12:
+ return 0x08009090;
+ case 13 ... 22:
+ return 0x01001090;
+ case 23 ... 36:
+ return 0x01008090;
+ case 37 ... 46:
+ return 0x08001090;
+ default:
+ return 0x08008090;
+ }
+}
+
+static const uint32_t axi_clkgen_lock_table[] = {
+ 0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8,
+ 0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8,
+ 0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339,
+ 0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271,
+ 0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4,
+ 0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190,
+ 0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e,
+ 0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c,
+ 0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113,
+};
+
+static uint32_t axi_clkgen_lookup_lock(unsigned int m)
+{
+ if (m < ARRAY_SIZE(axi_clkgen_lock_table))
+ return axi_clkgen_lock_table[m];
+ return 0x1f1f00fa;
+}
+
+static const unsigned int fpfd_min = 10000;
+static const unsigned int fpfd_max = 300000;
+static const unsigned int fvco_min = 600000;
+static const unsigned int fvco_max = 1200000;
+
+static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+ unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
+{
+ unsigned long d, d_min, d_max, _d_min, _d_max;
+ unsigned long m, m_min, m_max;
+ unsigned long f, dout, best_f, fvco;
+
+ fin /= 1000;
+ fout /= 1000;
+
+ best_f = ULONG_MAX;
+ *best_d = 0;
+ *best_m = 0;
+ *best_dout = 0;
+
+ d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
+ d_max = min_t(unsigned long, fin / fpfd_min, 80);
+
+ m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1);
+ m_max = min_t(unsigned long, fvco_max * d_max / fin, 64);
+
+ for (m = m_min; m <= m_max; m++) {
+ _d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max));
+ _d_max = min(d_max, fin * m / fvco_min);
+
+ for (d = _d_min; d <= _d_max; d++) {
+ fvco = fin * m / d;
+
+ dout = DIV_ROUND_CLOSEST(fvco, fout);
+ dout = clamp_t(unsigned long, dout, 1, 128);
+ f = fvco / dout;
+ if (abs(f - fout) < abs(best_f - fout)) {
+ best_f = f;
+ *best_d = d;
+ *best_m = m;
+ *best_dout = dout;
+ if (best_f == fout)
+ return;
+ }
+ }
+ }
+}
+
+static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low,
+ unsigned int *high, unsigned int *edge, unsigned int *nocount)
+{
+ if (divider == 1)
+ *nocount = 1;
+ else
+ *nocount = 0;
+
+ *high = divider / 2;
+ *edge = divider % 2;
+ *low = divider - *high;
+}
+
+static void axi_clkgen_write(struct axi_clkgen *axi_clkgen,
+ unsigned int reg, unsigned int val)
+{
+ writel(val, axi_clkgen->base + reg);
+}
+
+static void axi_clkgen_read(struct axi_clkgen *axi_clkgen,
+ unsigned int reg, unsigned int *val)
+{
+ *val = readl(axi_clkgen->base + reg);
+}
+
+static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw)
+{
+ return container_of(clk_hw, struct axi_clkgen, clk_hw);
+}
+
+static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ unsigned int d, m, dout;
+ unsigned int nocount;
+ unsigned int high;
+ unsigned int edge;
+ unsigned int low;
+ uint32_t filter;
+ uint32_t lock;
+
+ if (parent_rate == 0 || rate == 0)
+ return -EINVAL;
+
+ axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+
+ if (d == 0 || dout == 0 || m == 0)
+ return -EINVAL;
+
+ filter = axi_clkgen_lookup_filter(m - 1);
+ lock = axi_clkgen_lookup_lock(m - 1);
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0);
+
+ axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1,
+ (high << 6) | low);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2,
+ (edge << 7) | (nocount << 6));
+
+ axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV,
+ (edge << 13) | (nocount << 12) | (high << 6) | low);
+
+ axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1,
+ (high << 6) | low);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2,
+ (edge << 7) | (nocount << 6));
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2,
+ (((lock >> 16) & 0x1f) << 10) | 0x1);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3,
+ (((lock >> 24) & 0x1f) << 10) | 0x3e9);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16);
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter);
+
+ axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1);
+
+ return 0;
+}
+
+static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int d, m, dout;
+
+ axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+
+ if (d == 0 || dout == 0 || m == 0)
+ return -EINVAL;
+
+ return *parent_rate / d * m / dout;
+}
+
+static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
+ unsigned long parent_rate)
+{
+ struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+ unsigned int d, m, dout;
+ unsigned int reg;
+ unsigned long long tmp;
+
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, ®);
+ dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, ®);
+ d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+ axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, ®);
+ m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+ if (d == 0 || dout == 0)
+ return 0;
+
+ tmp = (unsigned long long)(parent_rate / d) * m;
+ do_div(tmp, dout);
+
+ if (tmp > ULONG_MAX)
+ return ULONG_MAX;
+
+ return tmp;
+}
+
+static const struct clk_ops axi_clkgen_ops = {
+ .recalc_rate = axi_clkgen_recalc_rate,
+ .round_rate = axi_clkgen_round_rate,
+ .set_rate = axi_clkgen_set_rate,
+};
+
+static int axi_clkgen_probe(struct platform_device *pdev)
+{
+ struct axi_clkgen *axi_clkgen;
+ struct clk_init_data init;
+ const char *parent_name;
+ const char *clk_name;
+ struct resource *mem;
+ struct clk *clk;
+
+ axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
+ if (!axi_clkgen)
+ return -ENOMEM;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(axi_clkgen->base))
+ return PTR_ERR(axi_clkgen->base);
+
+ parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
+ if (!parent_name)
+ return -EINVAL;
+
+ clk_name = pdev->dev.of_node->name;
+ of_property_read_string(pdev->dev.of_node, "clock-output-names",
+ &clk_name);
+
+ init.name = clk_name;
+ init.ops = &axi_clkgen_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ axi_clkgen->clk_hw.init = &init;
+ clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+ clk);
+}
+
+static int axi_clkgen_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id axi_clkgen_ids[] = {
+ { .compatible = "adi,axi-clkgen-1.00.a" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
+
+static struct platform_driver axi_clkgen_driver = {
+ .driver = {
+ .name = "adi-axi-clkgen",
+ .owner = THIS_MODULE,
+ .of_match_table = axi_clkgen_ids,
+ },
+ .probe = axi_clkgen_probe,
+ .remove = axi_clkgen_remove,
+};
+module_platform_driver(axi_clkgen_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator");
--- /dev/null
+/*
+ * Copyright (c) 2013 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+
+static u8 clk_composite_get_parent(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->get_parent(mux_hw);
+}
+
+static int clk_composite_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *mux_ops = composite->mux_ops;
+ struct clk_hw *mux_hw = composite->mux_hw;
+
+ mux_hw->clk = hw->clk;
+
+ return mux_ops->set_parent(mux_hw, index);
+}
+
+static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->recalc_rate(div_hw, parent_rate);
+}
+
+static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->round_rate(div_hw, rate, prate);
+}
+
+static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *div_ops = composite->div_ops;
+ struct clk_hw *div_hw = composite->div_hw;
+
+ div_hw->clk = hw->clk;
+
+ return div_ops->set_rate(div_hw, rate, parent_rate);
+}
+
+static int clk_composite_is_enabled(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->is_enabled(gate_hw);
+}
+
+static int clk_composite_enable(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ return gate_ops->enable(gate_hw);
+}
+
+static void clk_composite_disable(struct clk_hw *hw)
+{
+ struct clk_composite *composite = to_clk_composite(hw);
+ const struct clk_ops *gate_ops = composite->gate_ops;
+ struct clk_hw *gate_hw = composite->gate_hw;
+
+ gate_hw->clk = hw->clk;
+
+ gate_ops->disable(gate_hw);
+}
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *div_hw, const struct clk_ops *div_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags)
+{
+ struct clk *clk;
+ struct clk_init_data init;
+ struct clk_composite *composite;
+ struct clk_ops *clk_composite_ops;
+
+ composite = kzalloc(sizeof(*composite), GFP_KERNEL);
+ if (!composite) {
+ pr_err("%s: could not allocate composite clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ clk_composite_ops = &composite->ops;
+
+ if (mux_hw && mux_ops) {
+ if (!mux_ops->get_parent || !mux_ops->set_parent) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->mux_hw = mux_hw;
+ composite->mux_ops = mux_ops;
+ clk_composite_ops->get_parent = clk_composite_get_parent;
+ clk_composite_ops->set_parent = clk_composite_set_parent;
+ }
+
+ if (div_hw && div_ops) {
+ if (!div_ops->recalc_rate || !div_ops->round_rate ||
+ !div_ops->set_rate) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->div_hw = div_hw;
+ composite->div_ops = div_ops;
+ clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
+ clk_composite_ops->round_rate = clk_composite_round_rate;
+ clk_composite_ops->set_rate = clk_composite_set_rate;
+ }
+
+ if (gate_hw && gate_ops) {
+ if (!gate_ops->is_enabled || !gate_ops->enable ||
+ !gate_ops->disable) {
+ clk = ERR_PTR(-EINVAL);
+ goto err;
+ }
+
+ composite->gate_hw = gate_hw;
+ composite->gate_ops = gate_ops;
+ clk_composite_ops->is_enabled = clk_composite_is_enabled;
+ clk_composite_ops->enable = clk_composite_enable;
+ clk_composite_ops->disable = clk_composite_disable;
+ }
+
+ init.ops = clk_composite_ops;
+ composite->hw.init = &init;
+
+ clk = clk_register(dev, &composite->hw);
+ if (IS_ERR(clk))
+ goto err;
+
+ if (composite->mux_hw)
+ composite->mux_hw->clk = clk;
+
+ if (composite->div_hw)
+ composite->div_hw->clk = clk;
+
+ if (composite->gate_hw)
+ composite->gate_hw->clk = clk;
+
+ return clk;
+
+err:
+ kfree(composite);
+ return clk;
+}
static u8 clk_mux_get_parent(struct clk_hw *hw)
{
struct clk_mux *mux = to_clk_mux(hw);
+ int num_parents = __clk_get_num_parents(hw->clk);
u32 val;
/*
* val = 0x4 really means "bit 2, index starts at bit 0"
*/
val = readl(mux->reg) >> mux->shift;
- val &= (1 << mux->width) - 1;
+ val &= mux->mask;
+
+ if (mux->table) {
+ int i;
+
+ for (i = 0; i < num_parents; i++)
+ if (mux->table[i] == val)
+ return i;
+ return -EINVAL;
+ }
if (val && (mux->flags & CLK_MUX_INDEX_BIT))
val = ffs(val) - 1;
if (val && (mux->flags & CLK_MUX_INDEX_ONE))
val--;
- if (val >= __clk_get_num_parents(hw->clk))
+ if (val >= num_parents)
return -EINVAL;
return val;
u32 val;
unsigned long flags = 0;
- if (mux->flags & CLK_MUX_INDEX_BIT)
- index = (1 << ffs(index));
+ if (mux->table)
+ index = mux->table[index];
- if (mux->flags & CLK_MUX_INDEX_ONE)
- index++;
+ else {
+ if (mux->flags & CLK_MUX_INDEX_BIT)
+ index = (1 << ffs(index));
+
+ if (mux->flags & CLK_MUX_INDEX_ONE)
+ index++;
+ }
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
val = readl(mux->reg);
- val &= ~(((1 << mux->width) - 1) << mux->shift);
+ val &= ~(mux->mask << mux->shift);
val |= index << mux->shift;
writel(val, mux->reg);
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
-struct clk *clk_register_mux(struct device *dev, const char *name,
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
- void __iomem *reg, u8 shift, u8 width,
- u8 clk_mux_flags, spinlock_t *lock)
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock)
{
struct clk_mux *mux;
struct clk *clk;
/* struct clk_mux assignments */
mux->reg = reg;
mux->shift = shift;
- mux->width = width;
+ mux->mask = mask;
mux->flags = clk_mux_flags;
mux->lock = lock;
+ mux->table = table;
mux->hw.init = &init;
clk = clk_register(dev, &mux->hw);
return clk;
}
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mux_flags, spinlock_t *lock)
+{
+ u32 mask = BIT(width) - 1;
+
+ return clk_register_mux_table(dev, name, parent_names, num_parents,
+ flags, reg, shift, mask, clk_mux_flags,
+ NULL, lock);
+}
for (i = pll1; i < maxclk; i++) {
prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
- BUG_ON(!prima2_clks[i]);
+ BUG_ON(IS_ERR(prima2_clks[i]));
}
clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
clk_register_clkdev(prima2_clks[io], NULL, "io");
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/clk-provider.h>
+#include <linux/clk/zynq.h>
static void __iomem *slcr_base;
#include <linux/of.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/sched.h>
static DEFINE_SPINLOCK(enable_lock);
static DEFINE_MUTEX(prepare_lock);
+static struct task_struct *prepare_owner;
+static struct task_struct *enable_owner;
+
+static int prepare_refcnt;
+static int enable_refcnt;
+
static HLIST_HEAD(clk_root_list);
static HLIST_HEAD(clk_orphan_list);
static LIST_HEAD(clk_notifier_list);
+/*** locking ***/
+static void clk_prepare_lock(void)
+{
+ if (!mutex_trylock(&prepare_lock)) {
+ if (prepare_owner == current) {
+ prepare_refcnt++;
+ return;
+ }
+ mutex_lock(&prepare_lock);
+ }
+ WARN_ON_ONCE(prepare_owner != NULL);
+ WARN_ON_ONCE(prepare_refcnt != 0);
+ prepare_owner = current;
+ prepare_refcnt = 1;
+}
+
+static void clk_prepare_unlock(void)
+{
+ WARN_ON_ONCE(prepare_owner != current);
+ WARN_ON_ONCE(prepare_refcnt == 0);
+
+ if (--prepare_refcnt)
+ return;
+ prepare_owner = NULL;
+ mutex_unlock(&prepare_lock);
+}
+
+static unsigned long clk_enable_lock(void)
+{
+ unsigned long flags;
+
+ if (!spin_trylock_irqsave(&enable_lock, flags)) {
+ if (enable_owner == current) {
+ enable_refcnt++;
+ return flags;
+ }
+ spin_lock_irqsave(&enable_lock, flags);
+ }
+ WARN_ON_ONCE(enable_owner != NULL);
+ WARN_ON_ONCE(enable_refcnt != 0);
+ enable_owner = current;
+ enable_refcnt = 1;
+ return flags;
+}
+
+static void clk_enable_unlock(unsigned long flags)
+{
+ WARN_ON_ONCE(enable_owner != current);
+ WARN_ON_ONCE(enable_refcnt == 0);
+
+ if (--enable_refcnt)
+ return;
+ enable_owner = NULL;
+ spin_unlock_irqrestore(&enable_lock, flags);
+}
+
/*** debugfs support ***/
#ifdef CONFIG_COMMON_CLK_DEBUG
seq_printf(s, " clock enable_cnt prepare_cnt rate\n");
seq_printf(s, "---------------------------------------------------------------------\n");
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(c, &clk_root_list, child_node)
clk_summary_show_subtree(s, c, 0);
hlist_for_each_entry(c, &clk_orphan_list, child_node)
clk_summary_show_subtree(s, c, 0);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return 0;
}
seq_printf(s, "{");
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(c, &clk_root_list, child_node) {
if (!first_node)
clk_dump_subtree(s, c, 0);
}
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
seq_printf(s, "}");
return 0;
if (!orphandir)
return -ENOMEM;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(clk, &clk_root_list, child_node)
clk_debug_create_subtree(clk, rootdir);
inited = 1;
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return 0;
}
#endif
/* caller must hold prepare_lock */
+static void clk_unprepare_unused_subtree(struct clk *clk)
+{
+ struct clk *child;
+
+ if (!clk)
+ return;
+
+ hlist_for_each_entry(child, &clk->children, child_node)
+ clk_unprepare_unused_subtree(child);
+
+ if (clk->prepare_count)
+ return;
+
+ if (clk->flags & CLK_IGNORE_UNUSED)
+ return;
+
+ if (__clk_is_prepared(clk)) {
+ if (clk->ops->unprepare_unused)
+ clk->ops->unprepare_unused(clk->hw);
+ else if (clk->ops->unprepare)
+ clk->ops->unprepare(clk->hw);
+ }
+}
+
+/* caller must hold prepare_lock */
static void clk_disable_unused_subtree(struct clk *clk)
{
struct clk *child;
hlist_for_each_entry(child, &clk->children, child_node)
clk_disable_unused_subtree(child);
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
goto unlock_out;
}
unlock_out:
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
out:
return;
{
struct clk *clk;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
hlist_for_each_entry(clk, &clk_root_list, child_node)
clk_disable_unused_subtree(clk);
hlist_for_each_entry(clk, &clk_orphan_list, child_node)
clk_disable_unused_subtree(clk);
- mutex_unlock(&prepare_lock);
+ hlist_for_each_entry(clk, &clk_root_list, child_node)
+ clk_unprepare_unused_subtree(clk);
+
+ hlist_for_each_entry(clk, &clk_orphan_list, child_node)
+ clk_unprepare_unused_subtree(clk);
+
+ clk_prepare_unlock();
return 0;
}
return !clk ? 0 : clk->flags;
}
+bool __clk_is_prepared(struct clk *clk)
+{
+ int ret;
+
+ if (!clk)
+ return false;
+
+ /*
+ * .is_prepared is optional for clocks that can prepare
+ * fall back to software usage counter if it is missing
+ */
+ if (!clk->ops->is_prepared) {
+ ret = clk->prepare_count ? 1 : 0;
+ goto out;
+ }
+
+ ret = clk->ops->is_prepared(clk->hw);
+out:
+ return !!ret;
+}
+
bool __clk_is_enabled(struct clk *clk)
{
int ret;
*/
void clk_unprepare(struct clk *clk)
{
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
__clk_unprepare(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
}
EXPORT_SYMBOL_GPL(clk_unprepare);
{
int ret;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
ret = __clk_prepare(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
unsigned long flags;
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
__clk_disable(clk);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
}
EXPORT_SYMBOL_GPL(clk_disable);
unsigned long flags;
int ret;
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
ret = __clk_enable(clk);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
return ret;
}
{
unsigned long ret;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
ret = __clk_round_rate(clk, rate);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
unsigned long rate;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
__clk_recalc_rates(clk, 0);
rate = __clk_get_rate(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return rate;
}
int ret = NOTIFY_DONE;
if (clk->rate == clk->new_rate)
- return 0;
+ return NULL;
if (clk->notifier_count) {
ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
int ret = 0;
/* prevent racing with updates to the clock topology */
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* bail early if nothing to do */
if (rate == clk->rate)
clk_change_rate(top);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
{
struct clk *parent;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
parent = __clk_get_parent(clk);
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return parent;
}
__clk_prepare(parent);
/* FIXME replace with clk_is_enabled(clk) someday */
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
__clk_enable(parent);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
/* change clock input source */
ret = clk->ops->set_parent(clk->hw, i);
/* clean up old prepare and enable */
- spin_lock_irqsave(&enable_lock, flags);
+ flags = clk_enable_lock();
if (clk->enable_count)
__clk_disable(old_parent);
- spin_unlock_irqrestore(&enable_lock, flags);
+ clk_enable_unlock(flags);
if (clk->prepare_count)
__clk_unprepare(old_parent);
return -ENOSYS;
/* prevent racing with updates to the clock topology */
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
if (clk->parent == parent)
goto out;
__clk_reparent(clk, parent);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* check to see if a clock with this name is already registered */
if (__clk_lookup(clk->name)) {
clk_debug_register(clk);
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk || !nb)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
/* search the list of notifiers for this clk */
list_for_each_entry(cn, &clk_notifier_list, node)
clk->notifier_count++;
out:
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
if (!clk || !nb)
return -EINVAL;
- mutex_lock(&prepare_lock);
+ clk_prepare_lock();
list_for_each_entry(cn, &clk_notifier_list, node)
if (cn->clk == clk)
ret = -ENOENT;
}
- mutex_unlock(&prepare_lock);
+ clk_prepare_unlock();
return ret;
}
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx23.h>
+#include <linux/of_address.h>
#include "clk.h"
-#define DIGCTRL MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-#define CLKCTRL MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+static void __iomem *digctrl;
+
+#define CLKCTRL clkctrl
+#define DIGCTRL digctrl
+
#define PLLCTRL0 (CLKCTRL + 0x0000)
#define CPU (CLKCTRL + 0x0020)
#define HBUS (CLKCTRL + 0x0030)
u32 val;
/* Gate off cpu clock in WFI for power saving */
- __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+ writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
/* Clear BYPASS for SAIF */
- __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ);
+ writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR);
/* SAIF has to use frac div for functional operation */
val = readl_relaxed(SAIF);
* Source ssp clock from ref_io than ref_xtal,
* as ref_xtal only provides 24 MHz as maximum.
*/
- __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ);
+ writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR);
/*
* 480 MHz seems too high to be ssp clock source directly,
* so set frac to get a 288 MHz ref_io.
*/
- __mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC);
- __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
+ writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR);
+ writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET);
}
static const char *sel_pll[] __initconst = { "pll", "ref_xtal", };
struct device_node *np;
u32 i;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+ digctrl = of_iomap(np, 0);
+ WARN_ON(!digctrl);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+ clkctrl = of_iomap(np, 0);
+ WARN_ON(!clkctrl);
+
clk_misc_init();
clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
return PTR_ERR(clks[i]);
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
- if (np) {
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
-
- clk_register_clkdev(clks[clk32k], NULL, "timrot");
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
- mxs_timer_init();
-
return 0;
}
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx28.h>
+#include <linux/of_address.h>
#include "clk.h"
-#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+#define CLKCTRL clkctrl
+
#define PLL0CTRL0 (CLKCTRL + 0x0000)
#define PLL1CTRL0 (CLKCTRL + 0x0020)
#define PLL2CTRL0 (CLKCTRL + 0x0040)
#define BP_FRAC0_IO1FRAC 16
#define BP_FRAC0_IO0FRAC 24
-#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+static void __iomem *digctrl;
+#define DIGCTRL digctrl
#define BP_SAIF_CLKMUX 10
/*
if (clkmux > 0x3)
return -EINVAL;
- __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
- __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+ writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR);
+ writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET);
return 0;
}
u32 val;
/* Gate off cpu clock in WFI for power saving */
- __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+ writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
/* 0 is a bad default value for a divider */
- __mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+ writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET);
/* Clear BYPASS for SAIF */
- __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+ writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR);
/* SAIF has to use frac div for functional operation */
val = readl_relaxed(SAIF0);
* Source ssp clock from ref_io than ref_xtal,
* as ref_xtal only provides 24 MHz as maximum.
*/
- __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+ writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR);
/*
* 480 MHz seems too high to be ssp clock source directly,
struct device_node *np;
u32 i;
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+ digctrl = of_iomap(np, 0);
+ WARN_ON(!digctrl);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+ clkctrl = of_iomap(np, 0);
+ WARN_ON(!clkctrl);
+
clk_misc_init();
clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
return PTR_ERR(clks[i]);
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
- if (np) {
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[xbus], NULL, "timrot");
clk_register_clkdev(clks[enet_out], NULL, "enet_out");
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
- mxs_timer_init();
-
return 0;
}
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/spinlock.h>
+#include "clk.h"
DEFINE_SPINLOCK(mxs_lock);
--- /dev/null
+#
+# Samsung Clock specific Makefile
+#
+
+obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
+obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
+obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all Exynos4 SoCs.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <plat/cpu.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+/* Exynos4 clock controller register offsets */
+#define SRC_LEFTBUS 0x4200
+#define DIV_LEFTBUS 0x4500
+#define GATE_IP_LEFTBUS 0x4800
+#define E4X12_GATE_IP_IMAGE 0x4930
+#define SRC_RIGHTBUS 0x8200
+#define DIV_RIGHTBUS 0x8500
+#define GATE_IP_RIGHTBUS 0x8800
+#define E4X12_GATE_IP_PERIR 0x8960
+#define EPLL_LOCK 0xc010
+#define VPLL_LOCK 0xc020
+#define EPLL_CON0 0xc110
+#define EPLL_CON1 0xc114
+#define EPLL_CON2 0xc118
+#define VPLL_CON0 0xc120
+#define VPLL_CON1 0xc124
+#define VPLL_CON2 0xc128
+#define SRC_TOP0 0xc210
+#define SRC_TOP1 0xc214
+#define SRC_CAM 0xc220
+#define SRC_TV 0xc224
+#define SRC_MFC 0xcc28
+#define SRC_G3D 0xc22c
+#define E4210_SRC_IMAGE 0xc230
+#define SRC_LCD0 0xc234
+#define E4210_SRC_LCD1 0xc238
+#define E4X12_SRC_ISP 0xc238
+#define SRC_MAUDIO 0xc23c
+#define SRC_FSYS 0xc240
+#define SRC_PERIL0 0xc250
+#define SRC_PERIL1 0xc254
+#define E4X12_SRC_CAM1 0xc258
+#define SRC_MASK_TOP 0xc310
+#define SRC_MASK_CAM 0xc320
+#define SRC_MASK_TV 0xc324
+#define SRC_MASK_LCD0 0xc334
+#define E4210_SRC_MASK_LCD1 0xc338
+#define E4X12_SRC_MASK_ISP 0xc338
+#define SRC_MASK_MAUDIO 0xc33c
+#define SRC_MASK_FSYS 0xc340
+#define SRC_MASK_PERIL0 0xc350
+#define SRC_MASK_PERIL1 0xc354
+#define DIV_TOP 0xc510
+#define DIV_CAM 0xc520
+#define DIV_TV 0xc524
+#define DIV_MFC 0xc528
+#define DIV_G3D 0xc52c
+#define DIV_IMAGE 0xc530
+#define DIV_LCD0 0xc534
+#define E4210_DIV_LCD1 0xc538
+#define E4X12_DIV_ISP 0xc538
+#define DIV_MAUDIO 0xc53c
+#define DIV_FSYS0 0xc540
+#define DIV_FSYS1 0xc544
+#define DIV_FSYS2 0xc548
+#define DIV_FSYS3 0xc54c
+#define DIV_PERIL0 0xc550
+#define DIV_PERIL1 0xc554
+#define DIV_PERIL2 0xc558
+#define DIV_PERIL3 0xc55c
+#define DIV_PERIL4 0xc560
+#define DIV_PERIL5 0xc564
+#define E4X12_DIV_CAM1 0xc568
+#define GATE_SCLK_CAM 0xc820
+#define GATE_IP_CAM 0xc920
+#define GATE_IP_TV 0xc924
+#define GATE_IP_MFC 0xc928
+#define GATE_IP_G3D 0xc92c
+#define E4210_GATE_IP_IMAGE 0xc930
+#define GATE_IP_LCD0 0xc934
+#define E4210_GATE_IP_LCD1 0xc938
+#define E4X12_GATE_IP_ISP 0xc938
+#define E4X12_GATE_IP_MAUDIO 0xc93c
+#define GATE_IP_FSYS 0xc940
+#define GATE_IP_GPS 0xc94c
+#define GATE_IP_PERIL 0xc950
+#define E4210_GATE_IP_PERIR 0xc960
+#define GATE_BLOCK 0xc970
+#define E4X12_MPLL_CON0 0x10108
+#define SRC_DMC 0x10200
+#define SRC_MASK_DMC 0x10300
+#define DIV_DMC0 0x10500
+#define DIV_DMC1 0x10504
+#define GATE_IP_DMC 0x10900
+#define APLL_CON0 0x14100
+#define E4210_MPLL_CON0 0x14108
+#define SRC_CPU 0x14200
+#define DIV_CPU0 0x14500
+#define DIV_CPU1 0x14504
+#define GATE_SCLK_CPU 0x14800
+#define GATE_IP_CPU 0x14900
+#define E4X12_DIV_ISP0 0x18300
+#define E4X12_DIV_ISP1 0x18304
+#define E4X12_GATE_ISP0 0x18800
+#define E4X12_GATE_ISP1 0x18804
+
+/* the exynos4 soc type */
+enum exynos4_soc {
+ EXYNOS4210,
+ EXYNOS4X12,
+};
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms. The clocks are categorized into three
+ * sections: core, sclk gate and bus interface gate clocks.
+ *
+ * When adding a new clock to this list, it is advised to choose a clock
+ * category and add it to the end of that category. That is because the the
+ * device tree source file is referring to these ids and any change in the
+ * sequence number of existing clocks will require corresponding change in the
+ * device tree files. This limitation would go away when pre-processor support
+ * for dtc would be available.
+ */
+enum exynos4_clks {
+ none,
+
+ /* core clocks */
+ xxti, xusbxti, fin_pll, fout_apll, fout_mpll, fout_epll, fout_vpll,
+ sclk_apll, sclk_mpll, sclk_epll, sclk_vpll, arm_clk, aclk200, aclk100,
+ aclk160, aclk133, mout_mpll_user_t, mout_mpll_user_c, mout_core,
+ mout_apll, /* 20 */
+
+ /* gate for special clocks (sclk) */
+ sclk_fimc0 = 128, sclk_fimc1, sclk_fimc2, sclk_fimc3, sclk_cam0,
+ sclk_cam1, sclk_csis0, sclk_csis1, sclk_hdmi, sclk_mixer, sclk_dac,
+ sclk_pixel, sclk_fimd0, sclk_mdnie0, sclk_mdnie_pwm0, sclk_mipi0,
+ sclk_audio0, sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_mmc4,
+ sclk_sata, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_uart4,
+ sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+ sclk_slimbus, sclk_fimd1, sclk_mipi1, sclk_pcm1, sclk_pcm2, sclk_i2s1,
+ sclk_i2s2, sclk_mipihsi, sclk_mfc, sclk_pcm0, sclk_g3d, sclk_pwm_isp,
+ sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp,
+
+ /* gate clocks */
+ fimc0 = 256, fimc1, fimc2, fimc3, csis0, csis1, jpeg, smmu_fimc0,
+ smmu_fimc1, smmu_fimc2, smmu_fimc3, smmu_jpeg, vp, mixer, tvenc, hdmi,
+ smmu_tv, mfc, smmu_mfcl, smmu_mfcr, g3d, g2d, rotator, mdma, smmu_g2d,
+ smmu_rotator, smmu_mdma, fimd0, mie0, mdnie0, dsim0, smmu_fimd0, fimd1,
+ mie1, dsim1, smmu_fimd1, pdma0, pdma1, pcie_phy, sata_phy, tsi, sdmmc0,
+ sdmmc1, sdmmc2, sdmmc3, sdmmc4, sata, sromc, usb_host, usb_device, pcie,
+ onenand, nfcon, smmu_pcie, gps, smmu_gps, uart0, uart1, uart2, uart3,
+ uart4, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, tsadc,
+ spi0, spi1, spi2, i2s1, i2s2, pcm0, i2s0, pcm1, pcm2, pwm, slimbus,
+ spdif, ac97, modemif, chipid, sysreg, hdmi_cec, mct, wdt, rtc, keyif,
+ audss, mipi_hsi, mdma2, pixelasyncm0, pixelasyncm1, fimc_lite0,
+ fimc_lite1, ppmuispx, ppmuispmx, fimc_isp, fimc_drc, fimc_fd, mcuisp,
+ gicisp, smmu_isp, smmu_drc, smmu_fd, smmu_lite0, smmu_lite1, mcuctl_isp,
+ mpwm_isp, i2c0_isp, i2c1_isp, mtcadc_isp, pwm_isp, wdt_isp, uart_isp,
+ asyncaxim, smmu_ispcx, spi0_isp, spi1_isp, pwm_isp_sclk, spi0_isp_sclk,
+ spi1_isp_sclk, uart_isp_sclk,
+
+ /* mux clocks */
+ mout_fimc0 = 384, mout_fimc1, mout_fimc2, mout_fimc3, mout_cam0,
+ mout_cam1, mout_csis0, mout_csis1, mout_g3d0, mout_g3d1, mout_g3d,
+ aclk400_mcuisp,
+
+ /* div clocks */
+ div_isp0 = 450, div_isp1, div_mcuisp0, div_mcuisp1, div_aclk200,
+ div_aclk400_mcuisp,
+
+ nr_clks,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static __initdata unsigned long exynos4210_clk_save[] = {
+ E4210_SRC_IMAGE,
+ E4210_SRC_LCD1,
+ E4210_SRC_MASK_LCD1,
+ E4210_DIV_LCD1,
+ E4210_GATE_IP_IMAGE,
+ E4210_GATE_IP_LCD1,
+ E4210_GATE_IP_PERIR,
+ E4210_MPLL_CON0,
+};
+
+static __initdata unsigned long exynos4x12_clk_save[] = {
+ E4X12_GATE_IP_IMAGE,
+ E4X12_GATE_IP_PERIR,
+ E4X12_SRC_CAM1,
+ E4X12_DIV_ISP,
+ E4X12_DIV_CAM1,
+ E4X12_MPLL_CON0,
+};
+
+static __initdata unsigned long exynos4_clk_regs[] = {
+ SRC_LEFTBUS,
+ DIV_LEFTBUS,
+ GATE_IP_LEFTBUS,
+ SRC_RIGHTBUS,
+ DIV_RIGHTBUS,
+ GATE_IP_RIGHTBUS,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ VPLL_CON0,
+ VPLL_CON1,
+ VPLL_CON2,
+ SRC_TOP0,
+ SRC_TOP1,
+ SRC_CAM,
+ SRC_TV,
+ SRC_MFC,
+ SRC_G3D,
+ SRC_LCD0,
+ SRC_MAUDIO,
+ SRC_FSYS,
+ SRC_PERIL0,
+ SRC_PERIL1,
+ SRC_MASK_TOP,
+ SRC_MASK_CAM,
+ SRC_MASK_TV,
+ SRC_MASK_LCD0,
+ SRC_MASK_MAUDIO,
+ SRC_MASK_FSYS,
+ SRC_MASK_PERIL0,
+ SRC_MASK_PERIL1,
+ DIV_TOP,
+ DIV_CAM,
+ DIV_TV,
+ DIV_MFC,
+ DIV_G3D,
+ DIV_IMAGE,
+ DIV_LCD0,
+ DIV_MAUDIO,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_FSYS3,
+ DIV_PERIL0,
+ DIV_PERIL1,
+ DIV_PERIL2,
+ DIV_PERIL3,
+ DIV_PERIL4,
+ DIV_PERIL5,
+ GATE_SCLK_CAM,
+ GATE_IP_CAM,
+ GATE_IP_TV,
+ GATE_IP_MFC,
+ GATE_IP_G3D,
+ GATE_IP_LCD0,
+ GATE_IP_FSYS,
+ GATE_IP_GPS,
+ GATE_IP_PERIL,
+ GATE_BLOCK,
+ SRC_MASK_DMC,
+ SRC_DMC,
+ DIV_DMC0,
+ DIV_DMC1,
+ GATE_IP_DMC,
+ APLL_CON0,
+ SRC_CPU,
+ DIV_CPU0,
+ DIV_CPU1,
+ GATE_SCLK_CPU,
+ GATE_IP_CPU,
+};
+
+/* list of all parent clock list */
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(mout_epll_p) = { "fin_pll", "fout_epll", };
+PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi24m", };
+PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
+PNAME(sclk_evpll_p) = { "sclk_epll", "sclk_vpll", };
+PNAME(mout_mfc_p) = { "mout_mfc0", "mout_mfc1", };
+PNAME(mout_g3d_p) = { "mout_g3d0", "mout_g3d1", };
+PNAME(mout_g2d_p) = { "mout_g2d0", "mout_g2d1", };
+PNAME(mout_hdmi_p) = { "sclk_pixel", "sclk_hdmiphy", };
+PNAME(mout_jpeg_p) = { "mout_jpeg0", "mout_jpeg1", };
+PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2",
+ "spdif_extclk", };
+PNAME(mout_onenand_p) = {"aclk133", "aclk160", };
+PNAME(mout_onenand1_p) = {"mout_onenand", "sclk_vpll", };
+
+/* Exynos 4210-specific parent groups */
+PNAME(sclk_vpll_p4210) = { "mout_vpllsrc", "fout_vpll", };
+PNAME(mout_core_p4210) = { "mout_apll", "sclk_mpll", };
+PNAME(sclk_ampll_p4210) = { "sclk_mpll", "sclk_apll", };
+PNAME(group1_p4210) = { "xxti", "xusbxti", "sclk_hdmi24m",
+ "sclk_usbphy0", "none", "sclk_hdmiphy",
+ "sclk_mpll", "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio0_p4210) = { "cdclk0", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll" };
+PNAME(mout_audio1_p4210) = { "cdclk1", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio2_p4210) = { "cdclk2", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_mixer_p4210) = { "sclk_dac", "sclk_hdmi", };
+PNAME(mout_dac_p4210) = { "sclk_vpll", "sclk_hdmiphy", };
+
+/* Exynos 4x12-specific parent groups */
+PNAME(mout_mpll_user_p4x12) = { "fin_pll", "sclk_mpll", };
+PNAME(mout_core_p4x12) = { "mout_apll", "mout_mpll_user_c", };
+PNAME(sclk_ampll_p4x12) = { "mout_mpll_user_t", "sclk_apll", };
+PNAME(group1_p4x12) = { "xxti", "xusbxti", "sclk_hdmi24m", "sclk_usbphy0",
+ "none", "sclk_hdmiphy", "mout_mpll_user_t",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio0_p4x12) = { "cdclk0", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll" };
+PNAME(mout_audio1_p4x12) = { "cdclk1", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio2_p4x12) = { "cdclk2", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll", };
+PNAME(aclk_p4412) = { "mout_mpll_user_t", "sclk_apll", };
+PNAME(mout_user_aclk400_mcuisp_p4x12) = {"fin_pll", "div_aclk400_mcuisp", };
+PNAME(mout_user_aclk200_p4x12) = {"fin_pll", "div_aclk200", };
+PNAME(mout_user_aclk266_gps_p4x12) = {"fin_pll", "div_aclk266_gps", };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata = {
+ FRATE(xxti, "xxti", NULL, CLK_IS_ROOT, 0),
+ FRATE(xusbxti, "xusbxti", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(none, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
+};
+
+struct samsung_fixed_rate_clock exynos4210_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_usbphy1", NULL, CLK_IS_ROOT, 48000000),
+};
+
+/* list of mux clocks supported in all exynos4 soc's */
+struct samsung_mux_clock exynos4_mux_clks[] __initdata = {
+ MUX_F(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1),
+ MUX(none, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1),
+ MUX(none, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+ MUX_F(mout_g3d1, "mout_g3d1", sclk_evpll_p, SRC_G3D, 4, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX_F(mout_g3d, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIL1, 8, 2),
+ MUX(none, "mout_onenand1", mout_onenand1_p, SRC_TOP0, 0, 1),
+ MUX_A(sclk_epll, "sclk_epll", mout_epll_p, SRC_TOP0, 4, 1, "sclk_epll"),
+ MUX(none, "mout_onenand", mout_onenand_p, SRC_TOP0, 28, 1),
+};
+
+/* list of mux clocks supported in exynos4210 soc */
+struct samsung_mux_clock exynos4210_mux_clks[] __initdata = {
+ MUX(none, "mout_aclk200", sclk_ampll_p4210, SRC_TOP0, 12, 1),
+ MUX(none, "mout_aclk100", sclk_ampll_p4210, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk160", sclk_ampll_p4210, SRC_TOP0, 20, 1),
+ MUX(none, "mout_aclk133", sclk_ampll_p4210, SRC_TOP0, 24, 1),
+ MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+ MUX(none, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1),
+ MUX(none, "mout_dac", mout_dac_p4210, SRC_TV, 8, 1),
+ MUX(none, "mout_g2d0", sclk_ampll_p4210, E4210_SRC_IMAGE, 0, 1),
+ MUX(none, "mout_g2d1", sclk_evpll_p, E4210_SRC_IMAGE, 4, 1),
+ MUX(none, "mout_g2d", mout_g2d_p, E4210_SRC_IMAGE, 8, 1),
+ MUX(none, "mout_fimd1", group1_p4210, E4210_SRC_LCD1, 0, 4),
+ MUX(none, "mout_mipi1", group1_p4210, E4210_SRC_LCD1, 12, 4),
+ MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "sclk_mpll"),
+ MUX_A(mout_core, "mout_core", mout_core_p4210,
+ SRC_CPU, 16, 1, "mout_core"),
+ MUX_A(sclk_vpll, "sclk_vpll", sclk_vpll_p4210,
+ SRC_TOP0, 8, 1, "sclk_vpll"),
+ MUX(mout_fimc0, "mout_fimc0", group1_p4210, SRC_CAM, 0, 4),
+ MUX(mout_fimc1, "mout_fimc1", group1_p4210, SRC_CAM, 4, 4),
+ MUX(mout_fimc2, "mout_fimc2", group1_p4210, SRC_CAM, 8, 4),
+ MUX(mout_fimc3, "mout_fimc3", group1_p4210, SRC_CAM, 12, 4),
+ MUX(mout_cam0, "mout_cam0", group1_p4210, SRC_CAM, 16, 4),
+ MUX(mout_cam1, "mout_cam1", group1_p4210, SRC_CAM, 20, 4),
+ MUX(mout_csis0, "mout_csis0", group1_p4210, SRC_CAM, 24, 4),
+ MUX(mout_csis1, "mout_csis1", group1_p4210, SRC_CAM, 28, 4),
+ MUX(none, "mout_mfc0", sclk_ampll_p4210, SRC_MFC, 0, 1),
+ MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4210, SRC_G3D, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_fimd0", group1_p4210, SRC_LCD0, 0, 4),
+ MUX(none, "mout_mipi0", group1_p4210, SRC_LCD0, 12, 4),
+ MUX(none, "mout_audio0", mout_audio0_p4210, SRC_MAUDIO, 0, 4),
+ MUX(none, "mout_mmc0", group1_p4210, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", group1_p4210, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", group1_p4210, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", group1_p4210, SRC_FSYS, 12, 4),
+ MUX(none, "mout_mmc4", group1_p4210, SRC_FSYS, 16, 4),
+ MUX(none, "mout_sata", sclk_ampll_p4210, SRC_FSYS, 24, 1),
+ MUX(none, "mout_uart0", group1_p4210, SRC_PERIL0, 0, 4),
+ MUX(none, "mout_uart1", group1_p4210, SRC_PERIL0, 4, 4),
+ MUX(none, "mout_uart2", group1_p4210, SRC_PERIL0, 8, 4),
+ MUX(none, "mout_uart3", group1_p4210, SRC_PERIL0, 12, 4),
+ MUX(none, "mout_uart4", group1_p4210, SRC_PERIL0, 16, 4),
+ MUX(none, "mout_audio1", mout_audio1_p4210, SRC_PERIL1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p4210, SRC_PERIL1, 4, 4),
+ MUX(none, "mout_spi0", group1_p4210, SRC_PERIL1, 16, 4),
+ MUX(none, "mout_spi1", group1_p4210, SRC_PERIL1, 20, 4),
+ MUX(none, "mout_spi2", group1_p4210, SRC_PERIL1, 24, 4),
+};
+
+/* list of mux clocks supported in exynos4x12 soc */
+struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = {
+ MUX(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12,
+ SRC_CPU, 24, 1),
+ MUX(none, "mout_aclk266_gps", aclk_p4412, SRC_TOP1, 4, 1),
+ MUX(none, "mout_aclk400_mcuisp", aclk_p4412, SRC_TOP1, 8, 1),
+ MUX(mout_mpll_user_t, "mout_mpll_user_t", mout_mpll_user_p4x12,
+ SRC_TOP1, 12, 1),
+ MUX(none, "mout_user_aclk266_gps", mout_user_aclk266_gps_p4x12,
+ SRC_TOP1, 16, 1),
+ MUX(aclk200, "aclk200", mout_user_aclk200_p4x12, SRC_TOP1, 20, 1),
+ MUX(aclk400_mcuisp, "aclk400_mcuisp", mout_user_aclk400_mcuisp_p4x12,
+ SRC_TOP1, 24, 1),
+ MUX(none, "mout_aclk200", aclk_p4412, SRC_TOP0, 12, 1),
+ MUX(none, "mout_aclk100", aclk_p4412, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk160", aclk_p4412, SRC_TOP0, 20, 1),
+ MUX(none, "mout_aclk133", aclk_p4412, SRC_TOP0, 24, 1),
+ MUX(none, "mout_mdnie0", group1_p4x12, SRC_LCD0, 4, 4),
+ MUX(none, "mout_mdnie_pwm0", group1_p4x12, SRC_LCD0, 8, 4),
+ MUX(none, "mout_sata", sclk_ampll_p4x12, SRC_FSYS, 24, 1),
+ MUX(none, "mout_jpeg0", sclk_ampll_p4x12, E4X12_SRC_CAM1, 0, 1),
+ MUX(none, "mout_jpeg1", sclk_evpll_p, E4X12_SRC_CAM1, 4, 1),
+ MUX(none, "mout_jpeg", mout_jpeg_p, E4X12_SRC_CAM1, 8, 1),
+ MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p,
+ SRC_DMC, 12, 1, "sclk_mpll"),
+ MUX_A(sclk_vpll, "sclk_vpll", mout_vpll_p,
+ SRC_TOP0, 8, 1, "sclk_vpll"),
+ MUX(mout_core, "mout_core", mout_core_p4x12, SRC_CPU, 16, 1),
+ MUX(mout_fimc0, "mout_fimc0", group1_p4x12, SRC_CAM, 0, 4),
+ MUX(mout_fimc1, "mout_fimc1", group1_p4x12, SRC_CAM, 4, 4),
+ MUX(mout_fimc2, "mout_fimc2", group1_p4x12, SRC_CAM, 8, 4),
+ MUX(mout_fimc3, "mout_fimc3", group1_p4x12, SRC_CAM, 12, 4),
+ MUX(mout_cam0, "mout_cam0", group1_p4x12, SRC_CAM, 16, 4),
+ MUX(mout_cam1, "mout_cam1", group1_p4x12, SRC_CAM, 20, 4),
+ MUX(mout_csis0, "mout_csis0", group1_p4x12, SRC_CAM, 24, 4),
+ MUX(mout_csis1, "mout_csis1", group1_p4x12, SRC_CAM, 28, 4),
+ MUX(none, "mout_mfc0", sclk_ampll_p4x12, SRC_MFC, 0, 1),
+ MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4x12, SRC_G3D, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_fimd0", group1_p4x12, SRC_LCD0, 0, 4),
+ MUX(none, "mout_mipi0", group1_p4x12, SRC_LCD0, 12, 4),
+ MUX(none, "mout_audio0", mout_audio0_p4x12, SRC_MAUDIO, 0, 4),
+ MUX(none, "mout_mmc0", group1_p4x12, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", group1_p4x12, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", group1_p4x12, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", group1_p4x12, SRC_FSYS, 12, 4),
+ MUX(none, "mout_mmc4", group1_p4x12, SRC_FSYS, 16, 4),
+ MUX(none, "mout_mipihsi", aclk_p4412, SRC_FSYS, 24, 1),
+ MUX(none, "mout_uart0", group1_p4x12, SRC_PERIL0, 0, 4),
+ MUX(none, "mout_uart1", group1_p4x12, SRC_PERIL0, 4, 4),
+ MUX(none, "mout_uart2", group1_p4x12, SRC_PERIL0, 8, 4),
+ MUX(none, "mout_uart3", group1_p4x12, SRC_PERIL0, 12, 4),
+ MUX(none, "mout_uart4", group1_p4x12, SRC_PERIL0, 16, 4),
+ MUX(none, "mout_audio1", mout_audio1_p4x12, SRC_PERIL1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p4x12, SRC_PERIL1, 4, 4),
+ MUX(none, "mout_spi0", group1_p4x12, SRC_PERIL1, 16, 4),
+ MUX(none, "mout_spi1", group1_p4x12, SRC_PERIL1, 20, 4),
+ MUX(none, "mout_spi2", group1_p4x12, SRC_PERIL1, 24, 4),
+ MUX(none, "mout_pwm_isp", group1_p4x12, E4X12_SRC_ISP, 0, 4),
+ MUX(none, "mout_spi0_isp", group1_p4x12, E4X12_SRC_ISP, 4, 4),
+ MUX(none, "mout_spi1_isp", group1_p4x12, E4X12_SRC_ISP, 8, 4),
+ MUX(none, "mout_uart_isp", group1_p4x12, E4X12_SRC_ISP, 12, 4),
+};
+
+/* list of divider clocks supported in all exynos4 soc's */
+struct samsung_div_clock exynos4_div_clks[] __initdata = {
+ DIV(none, "div_core", "mout_core", DIV_CPU0, 0, 3),
+ DIV(none, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(none, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4),
+ DIV(none, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4),
+ DIV(none, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4),
+ DIV(none, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4),
+ DIV(none, "div_cam0", "mout_cam0", DIV_CAM, 16, 4),
+ DIV(none, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(none, "div_csis0", "mout_csis0", DIV_CAM, 24, 4),
+ DIV(none, "div_csis1", "mout_csis1", DIV_CAM, 28, 4),
+ DIV(sclk_mfc, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4),
+ DIV_F(none, "div_g3d", "mout_g3d", DIV_G3D, 0, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(none, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4),
+ DIV(none, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4),
+ DIV(none, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4),
+ DIV(sclk_pcm0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8),
+ DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+ DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+ DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4),
+ DIV(sclk_pixel, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4),
+ DIV(aclk100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4),
+ DIV(aclk160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3),
+ DIV(aclk133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3),
+ DIV(none, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3),
+ DIV(sclk_slimbus, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4),
+ DIV(sclk_pcm1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8),
+ DIV(sclk_pcm2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8),
+ DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
+ DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
+ DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
+ DIV(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8),
+ DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+ DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
+ DIV(none, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4),
+ DIV(none, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4),
+ DIV(none, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+ DIV(none, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8),
+ DIV(none, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV(none, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8),
+ DIV(none, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4),
+ DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8),
+ DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4),
+ DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4),
+ DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "arm_clk"),
+ DIV_A(sclk_apll, "sclk_apll", "mout_apll",
+ DIV_CPU0, 24, 3, "sclk_apll"),
+ DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+};
+
+/* list of divider clocks supported in exynos4210 soc */
+struct samsung_div_clock exynos4210_div_clks[] __initdata = {
+ DIV(aclk200, "aclk200", "mout_aclk200", DIV_TOP, 0, 3),
+ DIV(none, "div_g2d", "mout_g2d", DIV_IMAGE, 0, 4),
+ DIV(none, "div_fimd1", "mout_fimd1", E4210_DIV_LCD1, 0, 4),
+ DIV(none, "div_mipi1", "mout_mipi1", E4210_DIV_LCD1, 16, 4),
+ DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
+ DIV_F(none, "div_mipi_pre1", "div_mipi1", E4210_DIV_LCD1, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+};
+
+/* list of divider clocks supported in exynos4x12 soc */
+struct samsung_div_clock exynos4x12_div_clks[] __initdata = {
+ DIV(none, "div_mdnie0", "mout_mdnie0", DIV_LCD0, 4, 4),
+ DIV(none, "div_mdnie_pwm0", "mout_mdnie_pwm0", DIV_LCD0, 8, 4),
+ DIV(none, "div_mdnie_pwm_pre0", "div_mdnie_pwm0", DIV_LCD0, 12, 4),
+ DIV(none, "div_mipihsi", "mout_mipihsi", DIV_FSYS0, 20, 4),
+ DIV(none, "div_jpeg", "mout_jpeg", E4X12_DIV_CAM1, 0, 4),
+ DIV(div_aclk200, "div_aclk200", "mout_aclk200", DIV_TOP, 0, 3),
+ DIV(none, "div_aclk266_gps", "mout_aclk266_gps", DIV_TOP, 20, 3),
+ DIV(div_aclk400_mcuisp, "div_aclk400_mcuisp", "mout_aclk400_mcuisp",
+ DIV_TOP, 24, 3),
+ DIV(none, "div_pwm_isp", "mout_pwm_isp", E4X12_DIV_ISP, 0, 4),
+ DIV(none, "div_spi0_isp", "mout_spi0_isp", E4X12_DIV_ISP, 4, 4),
+ DIV(none, "div_spi0_isp_pre", "div_spi0_isp", E4X12_DIV_ISP, 8, 8),
+ DIV(none, "div_spi1_isp", "mout_spi1_isp", E4X12_DIV_ISP, 16, 4),
+ DIV(none, "div_spi1_isp_pre", "div_spi1_isp", E4X12_DIV_ISP, 20, 8),
+ DIV(none, "div_uart_isp", "mout_uart_isp", E4X12_DIV_ISP, 28, 4),
+ DIV(div_isp0, "div_isp0", "aclk200", E4X12_DIV_ISP0, 0, 3),
+ DIV(div_isp1, "div_isp1", "aclk200", E4X12_DIV_ISP0, 4, 3),
+ DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3),
+ DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3),
+ DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3),
+};
+
+/* list of gate clocks supported in all exynos4 soc's */
+struct samsung_gate_clock exynos4_gate_clks[] __initdata = {
+ /*
+ * After all Exynos4 based platforms are migrated to use device tree,
+ * the device name and clock alias names specified below for some
+ * of the clocks can be removed.
+ */
+ GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", SRC_MASK_TV, 0, 0, 0),
+ GATE(sclk_spdif, "sclk_spdif", "mout_spdif", SRC_MASK_PERIL1, 8, 0, 0),
+ GATE(jpeg, "jpeg", "aclk160", GATE_IP_CAM, 6, 0, 0),
+ GATE(mie0, "mie0", "aclk160", GATE_IP_LCD0, 1, 0, 0),
+ GATE(dsim0, "dsim0", "aclk160", GATE_IP_LCD0, 3, 0, 0),
+ GATE(fimd1, "fimd1", "aclk160", E4210_GATE_IP_LCD1, 0, 0, 0),
+ GATE(mie1, "mie1", "aclk160", E4210_GATE_IP_LCD1, 1, 0, 0),
+ GATE(dsim1, "dsim1", "aclk160", E4210_GATE_IP_LCD1, 3, 0, 0),
+ GATE(smmu_fimd1, "smmu_fimd1", "aclk160", E4210_GATE_IP_LCD1, 4, 0, 0),
+ GATE(tsi, "tsi", "aclk133", GATE_IP_FSYS, 4, 0, 0),
+ GATE(sromc, "sromc", "aclk133", GATE_IP_FSYS, 11, 0, 0),
+ GATE(sclk_g3d, "sclk_g3d", "div_g3d", GATE_IP_G3D, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(usb_device, "usb_device", "aclk133", GATE_IP_FSYS, 13, 0, 0),
+ GATE(onenand, "onenand", "aclk133", GATE_IP_FSYS, 15, 0, 0),
+ GATE(nfcon, "nfcon", "aclk133", GATE_IP_FSYS, 16, 0, 0),
+ GATE(gps, "gps", "aclk133", GATE_IP_GPS, 0, 0, 0),
+ GATE(smmu_gps, "smmu_gps", "aclk133", GATE_IP_GPS, 1, 0, 0),
+ GATE(slimbus, "slimbus", "aclk100", GATE_IP_PERIL, 25, 0, 0),
+ GATE(sclk_cam0, "sclk_cam0", "div_cam0", GATE_SCLK_CAM, 4,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam1, "sclk_cam1", "div_cam1", GATE_SCLK_CAM, 5,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipi0, "sclk_mipi0", "div_mipi_pre0",
+ SRC_MASK_LCD0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio0, "sclk_audio0", "div_audio0", SRC_MASK_MAUDIO, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio1, "sclk_audio1", "div_audio1", SRC_MASK_PERIL1, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE_D(vp, "s5p-mixer", "vp", "aclk160", GATE_IP_TV, 0, 0, 0),
+ GATE_D(mixer, "s5p-mixer", "mixer", "aclk160", GATE_IP_TV, 1, 0, 0),
+ GATE_D(hdmi, "exynos4-hdmi", "hdmi", "aclk160", GATE_IP_TV, 3, 0, 0),
+ GATE_A(pwm, "pwm", "aclk100", GATE_IP_PERIL, 24, 0, 0, "timers"),
+ GATE_A(sdmmc4, "sdmmc4", "aclk133", GATE_IP_FSYS, 9, 0, 0, "biu"),
+ GATE_A(usb_host, "usb_host", "aclk133",
+ GATE_IP_FSYS, 12, 0, 0, "usbhost"),
+ GATE_DA(sclk_fimc0, "exynos4-fimc.0", "sclk_fimc0", "div_fimc0",
+ SRC_MASK_CAM, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc1, "exynos4-fimc.1", "sclk_fimc1", "div_fimc1",
+ SRC_MASK_CAM, 4, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc2, "exynos4-fimc.2", "sclk_fimc2", "div_fimc2",
+ SRC_MASK_CAM, 8, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc3, "exynos4-fimc.3", "sclk_fimc3", "div_fimc3",
+ SRC_MASK_CAM, 12, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_csis0, "s5p-mipi-csis.0", "sclk_csis0", "div_csis0",
+ SRC_MASK_CAM, 24, CLK_SET_RATE_PARENT, 0, "sclk_csis"),
+ GATE_DA(sclk_csis1, "s5p-mipi-csis.1", "sclk_csis1", "div_csis1",
+ SRC_MASK_CAM, 28, CLK_SET_RATE_PARENT, 0, "sclk_csis"),
+ GATE_DA(sclk_fimd0, "exynos4-fb.0", "sclk_fimd0", "div_fimd0",
+ SRC_MASK_LCD0, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"),
+ GATE_DA(sclk_mmc0, "exynos4-sdhci.0", "sclk_mmc0", "div_mmc_pre0",
+ SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc1, "exynos4-sdhci.1", "sclk_mmc1", "div_mmc_pre1",
+ SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc2, "exynos4-sdhci.2", "sclk_mmc2", "div_mmc_pre2",
+ SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc3, "exynos4-sdhci.3", "sclk_mmc3", "div_mmc_pre3",
+ SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc4, NULL, "sclk_mmc4", "div_mmc_pre4",
+ SRC_MASK_FSYS, 16, CLK_SET_RATE_PARENT, 0, "ciu"),
+ GATE_DA(sclk_uart0, "exynos4210-uart.0", "uclk0", "div_uart0",
+ SRC_MASK_PERIL0, 0, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart1, "exynos4210-uart.1", "uclk1", "div_uart1",
+ SRC_MASK_PERIL0, 4, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart2, "exynos4210-uart.2", "uclk2", "div_uart2",
+ SRC_MASK_PERIL0, 8, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart3, "exynos4210-uart.3", "uclk3", "div_uart3",
+ SRC_MASK_PERIL0, 12, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart4, "exynos4210-uart.4", "uclk4", "div_uart4",
+ SRC_MASK_PERIL0, 16, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE(sclk_audio2, "sclk_audio2", "div_audio2", SRC_MASK_PERIL1, 4,
+ CLK_SET_RATE_PARENT, 0),
+ GATE_DA(sclk_spi0, "exynos4210-spi.0", "sclk_spi0", "div_spi_pre0",
+ SRC_MASK_PERIL1, 16, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(sclk_spi1, "exynos4210-spi.1", "sclk_spi1", "div_spi_pre1",
+ SRC_MASK_PERIL1, 20, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(sclk_spi2, "exynos4210-spi.2", "sclk_spi2", "div_spi_pre2",
+ SRC_MASK_PERIL1, 24, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(fimc0, "exynos4-fimc.0", "fimc0", "aclk160",
+ GATE_IP_CAM, 0, 0, 0, "fimc"),
+ GATE_DA(fimc1, "exynos4-fimc.1", "fimc1", "aclk160",
+ GATE_IP_CAM, 1, 0, 0, "fimc"),
+ GATE_DA(fimc2, "exynos4-fimc.2", "fimc2", "aclk160",
+ GATE_IP_CAM, 2, 0, 0, "fimc"),
+ GATE_DA(fimc3, "exynos4-fimc.3", "fimc3", "aclk160",
+ GATE_IP_CAM, 3, 0, 0, "fimc"),
+ GATE_DA(csis0, "s5p-mipi-csis.0", "csis0", "aclk160",
+ GATE_IP_CAM, 4, 0, 0, "fimc"),
+ GATE_DA(csis1, "s5p-mipi-csis.1", "csis1", "aclk160",
+ GATE_IP_CAM, 5, 0, 0, "fimc"),
+ GATE_DA(smmu_fimc0, "exynos-sysmmu.5", "smmu_fimc0", "aclk160",
+ GATE_IP_CAM, 7, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc1, "exynos-sysmmu.6", "smmu_fimc1", "aclk160",
+ GATE_IP_CAM, 8, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc2, "exynos-sysmmu.7", "smmu_fimc2", "aclk160",
+ GATE_IP_CAM, 9, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc3, "exynos-sysmmu.8", "smmu_fimc3", "aclk160",
+ GATE_IP_CAM, 10, 0, 0, "sysmmu"),
+ GATE_DA(smmu_jpeg, "exynos-sysmmu.3", "smmu_jpeg", "aclk160",
+ GATE_IP_CAM, 11, 0, 0, "sysmmu"),
+ GATE(pixelasyncm0, "pxl_async0", "aclk160", GATE_IP_CAM, 17, 0, 0),
+ GATE(pixelasyncm1, "pxl_async1", "aclk160", GATE_IP_CAM, 18, 0, 0),
+ GATE_DA(smmu_tv, "exynos-sysmmu.2", "smmu_tv", "aclk160",
+ GATE_IP_TV, 4, 0, 0, "sysmmu"),
+ GATE_DA(mfc, "s5p-mfc", "mfc", "aclk100", GATE_IP_MFC, 0, 0, 0, "mfc"),
+ GATE_DA(smmu_mfcl, "exynos-sysmmu.0", "smmu_mfcl", "aclk100",
+ GATE_IP_MFC, 1, 0, 0, "sysmmu"),
+ GATE_DA(smmu_mfcr, "exynos-sysmmu.1", "smmu_mfcr", "aclk100",
+ GATE_IP_MFC, 2, 0, 0, "sysmmu"),
+ GATE_DA(fimd0, "exynos4-fb.0", "fimd0", "aclk160",
+ GATE_IP_LCD0, 0, 0, 0, "fimd"),
+ GATE_DA(smmu_fimd0, "exynos-sysmmu.10", "smmu_fimd0", "aclk160",
+ GATE_IP_LCD0, 4, 0, 0, "sysmmu"),
+ GATE_DA(pdma0, "dma-pl330.0", "pdma0", "aclk133",
+ GATE_IP_FSYS, 0, 0, 0, "dma"),
+ GATE_DA(pdma1, "dma-pl330.1", "pdma1", "aclk133",
+ GATE_IP_FSYS, 1, 0, 0, "dma"),
+ GATE_DA(sdmmc0, "exynos4-sdhci.0", "sdmmc0", "aclk133",
+ GATE_IP_FSYS, 5, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc1, "exynos4-sdhci.1", "sdmmc1", "aclk133",
+ GATE_IP_FSYS, 6, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc2, "exynos4-sdhci.2", "sdmmc2", "aclk133",
+ GATE_IP_FSYS, 7, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc3, "exynos4-sdhci.3", "sdmmc3", "aclk133",
+ GATE_IP_FSYS, 8, 0, 0, "hsmmc"),
+ GATE_DA(uart0, "exynos4210-uart.0", "uart0", "aclk100",
+ GATE_IP_PERIL, 0, 0, 0, "uart"),
+ GATE_DA(uart1, "exynos4210-uart.1", "uart1", "aclk100",
+ GATE_IP_PERIL, 1, 0, 0, "uart"),
+ GATE_DA(uart2, "exynos4210-uart.2", "uart2", "aclk100",
+ GATE_IP_PERIL, 2, 0, 0, "uart"),
+ GATE_DA(uart3, "exynos4210-uart.3", "uart3", "aclk100",
+ GATE_IP_PERIL, 3, 0, 0, "uart"),
+ GATE_DA(uart4, "exynos4210-uart.4", "uart4", "aclk100",
+ GATE_IP_PERIL, 4, 0, 0, "uart"),
+ GATE_DA(i2c0, "s3c2440-i2c.0", "i2c0", "aclk100",
+ GATE_IP_PERIL, 6, 0, 0, "i2c"),
+ GATE_DA(i2c1, "s3c2440-i2c.1", "i2c1", "aclk100",
+ GATE_IP_PERIL, 7, 0, 0, "i2c"),
+ GATE_DA(i2c2, "s3c2440-i2c.2", "i2c2", "aclk100",
+ GATE_IP_PERIL, 8, 0, 0, "i2c"),
+ GATE_DA(i2c3, "s3c2440-i2c.3", "i2c3", "aclk100",
+ GATE_IP_PERIL, 9, 0, 0, "i2c"),
+ GATE_DA(i2c4, "s3c2440-i2c.4", "i2c4", "aclk100",
+ GATE_IP_PERIL, 10, 0, 0, "i2c"),
+ GATE_DA(i2c5, "s3c2440-i2c.5", "i2c5", "aclk100",
+ GATE_IP_PERIL, 11, 0, 0, "i2c"),
+ GATE_DA(i2c6, "s3c2440-i2c.6", "i2c6", "aclk100",
+ GATE_IP_PERIL, 12, 0, 0, "i2c"),
+ GATE_DA(i2c7, "s3c2440-i2c.7", "i2c7", "aclk100",
+ GATE_IP_PERIL, 13, 0, 0, "i2c"),
+ GATE_DA(i2c_hdmi, "s3c2440-hdmiphy-i2c", "i2c-hdmi", "aclk100",
+ GATE_IP_PERIL, 14, 0, 0, "i2c"),
+ GATE_DA(spi0, "exynos4210-spi.0", "spi0", "aclk100",
+ GATE_IP_PERIL, 16, 0, 0, "spi"),
+ GATE_DA(spi1, "exynos4210-spi.1", "spi1", "aclk100",
+ GATE_IP_PERIL, 17, 0, 0, "spi"),
+ GATE_DA(spi2, "exynos4210-spi.2", "spi2", "aclk100",
+ GATE_IP_PERIL, 18, 0, 0, "spi"),
+ GATE_DA(i2s1, "samsung-i2s.1", "i2s1", "aclk100",
+ GATE_IP_PERIL, 20, 0, 0, "iis"),
+ GATE_DA(i2s2, "samsung-i2s.2", "i2s2", "aclk100",
+ GATE_IP_PERIL, 21, 0, 0, "iis"),
+ GATE_DA(pcm1, "samsung-pcm.1", "pcm1", "aclk100",
+ GATE_IP_PERIL, 22, 0, 0, "pcm"),
+ GATE_DA(pcm2, "samsung-pcm.2", "pcm2", "aclk100",
+ GATE_IP_PERIL, 23, 0, 0, "pcm"),
+ GATE_DA(spdif, "samsung-spdif", "spdif", "aclk100",
+ GATE_IP_PERIL, 26, 0, 0, "spdif"),
+ GATE_DA(ac97, "samsung-ac97", "ac97", "aclk100",
+ GATE_IP_PERIL, 27, 0, 0, "ac97"),
+};
+
+/* list of gate clocks supported in exynos4210 soc */
+struct samsung_gate_clock exynos4210_gate_clks[] __initdata = {
+ GATE(tvenc, "tvenc", "aclk160", GATE_IP_TV, 2, 0, 0),
+ GATE(g2d, "g2d", "aclk200", E4210_GATE_IP_IMAGE, 0, 0, 0),
+ GATE(rotator, "rotator", "aclk200", E4210_GATE_IP_IMAGE, 1, 0, 0),
+ GATE(mdma, "mdma", "aclk200", E4210_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(smmu_g2d, "smmu_g2d", "aclk200", E4210_GATE_IP_IMAGE, 3, 0, 0),
+ GATE(smmu_mdma, "smmu_mdma", "aclk200", E4210_GATE_IP_IMAGE, 5, 0, 0),
+ GATE(pcie_phy, "pcie_phy", "aclk133", GATE_IP_FSYS, 2, 0, 0),
+ GATE(sata_phy, "sata_phy", "aclk133", GATE_IP_FSYS, 3, 0, 0),
+ GATE(sata, "sata", "aclk133", GATE_IP_FSYS, 10, 0, 0),
+ GATE(pcie, "pcie", "aclk133", GATE_IP_FSYS, 14, 0, 0),
+ GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0),
+ GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0),
+ GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk200",
+ E4210_GATE_IP_IMAGE, 4, 0, 0),
+ GATE(sclk_mipi1, "sclk_mipi1", "div_mipi_pre1",
+ E4210_SRC_MASK_LCD1, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_sata, "sclk_sata", "div_sata",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mixer, "sclk_mixer", "mout_mixer", SRC_MASK_TV, 4, 0, 0),
+ GATE(sclk_dac, "sclk_dac", "mout_dac", SRC_MASK_TV, 8, 0, 0),
+ GATE_A(tsadc, "tsadc", "aclk100", GATE_IP_PERIL, 15, 0, 0, "adc"),
+ GATE_A(mct, "mct", "aclk100", E4210_GATE_IP_PERIR, 13, 0, 0, "mct"),
+ GATE_A(wdt, "watchdog", "aclk100", E4210_GATE_IP_PERIR, 14, 0, 0, "watchdog"),
+ GATE_A(rtc, "rtc", "aclk100", E4210_GATE_IP_PERIR, 15, 0, 0, "rtc"),
+ GATE_A(keyif, "keyif", "aclk100", E4210_GATE_IP_PERIR, 16, 0, 0, "keypad"),
+ GATE_DA(sclk_fimd1, "exynos4-fb.1", "sclk_fimd1", "div_fimd1",
+ E4210_SRC_MASK_LCD1, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"),
+};
+
+/* list of gate clocks supported in exynos4x12 soc */
+struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
+ GATE(audss, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
+ GATE(mdnie0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
+ GATE(rotator, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
+ GATE(mdma2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0),
+ GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
+ GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0),
+ GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0",
+ SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mdnie_pwm0, "sclk_mdnie_pwm0", "div_mdnie_pwm_pre0",
+ SRC_MASK_LCD0, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipihsi, "sclk_mipihsi", "div_mipihsi",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk200",
+ E4X12_GATE_IP_IMAGE, 4, 0, 0),
+ GATE_A(mct, "mct", "aclk100", E4X12_GATE_IP_PERIR, 13, 0, 0, "mct"),
+ GATE_A(rtc, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0, "rtc"),
+ GATE_A(keyif, "keyif", "aclk100",
+ E4X12_GATE_IP_PERIR, 16, 0, 0, "keypad"),
+ GATE(sclk_pwm_isp, "sclk_pwm_isp", "div_pwm_isp",
+ E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi0_isp, "sclk_spi0_isp", "div_spi0_isp_pre",
+ E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi1_isp, "sclk_spi1_isp", "div_spi1_isp_pre",
+ E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart_isp, "sclk_uart_isp", "div_uart_isp",
+ E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(pwm_isp_sclk, "pwm_isp_sclk", "sclk_pwm_isp",
+ E4X12_GATE_IP_ISP, 0, 0, 0),
+ GATE(spi0_isp_sclk, "spi0_isp_sclk", "sclk_spi0_isp",
+ E4X12_GATE_IP_ISP, 1, 0, 0),
+ GATE(spi1_isp_sclk, "spi1_isp_sclk", "sclk_spi1_isp",
+ E4X12_GATE_IP_ISP, 2, 0, 0),
+ GATE(uart_isp_sclk, "uart_isp_sclk", "sclk_uart_isp",
+ E4X12_GATE_IP_ISP, 3, 0, 0),
+ GATE_A(wdt, "watchdog", "aclk100",
+ E4X12_GATE_IP_PERIR, 14, 0, 0, "watchdog"),
+ GATE_DA(pcm0, "samsung-pcm.0", "pcm0", "aclk100",
+ E4X12_GATE_IP_MAUDIO, 2, 0, 0, "pcm"),
+ GATE_DA(i2s0, "samsung-i2s.0", "i2s0", "aclk100",
+ E4X12_GATE_IP_MAUDIO, 3, 0, 0, "iis"),
+ GATE(fimc_isp, "isp", "aclk200", E4X12_GATE_ISP0, 0,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_drc, "drc", "aclk200", E4X12_GATE_ISP0, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_fd, "fd", "aclk200", E4X12_GATE_ISP0, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_lite0, "lite0", "aclk200", E4X12_GATE_ISP0, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_lite1, "lite1", "aclk200", E4X12_GATE_ISP0, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mcuisp, "mcuisp", "aclk200", E4X12_GATE_ISP0, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(gicisp, "gicisp", "aclk200", E4X12_GATE_ISP0, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_isp, "smmu_isp", "aclk200", E4X12_GATE_ISP0, 8,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_drc, "smmu_drc", "aclk200", E4X12_GATE_ISP0, 9,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_fd, "smmu_fd", "aclk200", E4X12_GATE_ISP0, 10,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_lite0, "smmu_lite0", "aclk200", E4X12_GATE_ISP0, 11,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_lite1, "smmu_lite1", "aclk200", E4X12_GATE_ISP0, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(ppmuispmx, "ppmuispmx", "aclk200", E4X12_GATE_ISP0, 20,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(ppmuispx, "ppmuispx", "aclk200", E4X12_GATE_ISP0, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mcuctl_isp, "mcuctl_isp", "aclk200", E4X12_GATE_ISP0, 23,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mpwm_isp, "mpwm_isp", "aclk200", E4X12_GATE_ISP0, 24,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(i2c0_isp, "i2c0_isp", "aclk200", E4X12_GATE_ISP0, 25,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(i2c1_isp, "i2c1_isp", "aclk200", E4X12_GATE_ISP0, 26,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mtcadc_isp, "mtcadc_isp", "aclk200", E4X12_GATE_ISP0, 27,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(pwm_isp, "pwm_isp", "aclk200", E4X12_GATE_ISP0, 28,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(wdt_isp, "wdt_isp", "aclk200", E4X12_GATE_ISP0, 30,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(uart_isp, "uart_isp", "aclk200", E4X12_GATE_ISP0, 31,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(asyncaxim, "asyncaxim", "aclk200", E4X12_GATE_ISP1, 0,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_ispcx, "smmu_ispcx", "aclk200", E4X12_GATE_ISP1, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(spi0_isp, "spi0_isp", "aclk200", E4X12_GATE_ISP1, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13,
+ CLK_IGNORE_UNUSED, 0),
+};
+
+#ifdef CONFIG_OF
+static struct of_device_id exynos4_clk_ids[] __initdata = {
+ { .compatible = "samsung,exynos4210-clock",
+ .data = (void *)EXYNOS4210, },
+ { .compatible = "samsung,exynos4412-clock",
+ .data = (void *)EXYNOS4X12, },
+ { },
+};
+#endif
+
+/*
+ * The parent of the fin_pll clock is selected by the XOM[0] bit. This bit
+ * resides in chipid register space, outside of the clock controller memory
+ * mapped space. So to determine the parent of fin_pll clock, the chipid
+ * controller is first remapped and the value of XOM[0] bit is read to
+ * determine the parent clock.
+ */
+static void __init exynos4_clk_register_finpll(void)
+{
+ struct samsung_fixed_rate_clock fclk;
+ struct device_node *np;
+ struct clk *clk;
+ void __iomem *chipid_base = S5P_VA_CHIPID;
+ unsigned long xom, finpll_f = 24000000;
+ char *parent_name;
+
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid");
+ if (np)
+ chipid_base = of_iomap(np, 0);
+
+ if (chipid_base) {
+ xom = readl(chipid_base + 8);
+ parent_name = xom & 1 ? "xusbxti" : "xxti";
+ clk = clk_get(NULL, parent_name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to lookup parent clock %s, assuming "
+ "fin_pll clock frequency is 24MHz\n", __func__,
+ parent_name);
+ } else {
+ finpll_f = clk_get_rate(clk);
+ }
+ } else {
+ pr_err("%s: failed to map chipid registers, assuming "
+ "fin_pll clock frequency is 24MHz\n", __func__);
+ }
+
+ fclk.id = fin_pll;
+ fclk.name = "fin_pll";
+ fclk.parent_name = NULL;
+ fclk.flags = CLK_IS_ROOT;
+ fclk.fixed_rate = finpll_f;
+ samsung_clk_register_fixed_rate(&fclk, 1);
+
+ if (np)
+ iounmap(chipid_base);
+}
+
+/*
+ * This function allows non-dt platforms to specify the clock speed of the
+ * xxti and xusbxti clocks. These clocks are then registered with the specified
+ * clock speed.
+ */
+void __init exynos4_clk_register_fixed_ext(unsigned long xxti_f,
+ unsigned long xusbxti_f)
+{
+ exynos4_fixed_rate_ext_clks[0].fixed_rate = xxti_f;
+ exynos4_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
+ samsung_clk_register_fixed_rate(exynos4_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_ext_clks));
+}
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xxti", .data = (void *)0, },
+ { .compatible = "samsung,clock-xusbxti", .data = (void *)1, },
+ {},
+};
+
+/* register exynos4 clocks */
+void __init exynos4_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *apll, *mpll, *epll, *vpll;
+ u32 exynos4_soc;
+
+ if (np) {
+ const struct of_device_id *match;
+ match = of_match_node(exynos4_clk_ids, np);
+ exynos4_soc = (u32)match->data;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ } else {
+ reg_base = S5P_VA_CMU;
+ if (soc_is_exynos4210())
+ exynos4_soc = EXYNOS4210;
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4_soc = EXYNOS4X12;
+ else
+ panic("%s: unable to determine soc\n", __func__);
+ }
+
+ if (exynos4_soc == EXYNOS4210)
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
+ exynos4210_clk_save, ARRAY_SIZE(exynos4210_clk_save));
+ else
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
+ exynos4x12_clk_save, ARRAY_SIZE(exynos4x12_clk_save));
+
+ if (np)
+ samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
+ ext_clk_match);
+
+ exynos4_clk_register_finpll();
+
+ if (exynos4_soc == EXYNOS4210) {
+ apll = samsung_clk_register_pll45xx("fout_apll", "fin_pll",
+ reg_base + APLL_CON0, pll_4508);
+ mpll = samsung_clk_register_pll45xx("fout_mpll", "fin_pll",
+ reg_base + E4210_MPLL_CON0, pll_4508);
+ epll = samsung_clk_register_pll46xx("fout_epll", "fin_pll",
+ reg_base + EPLL_CON0, pll_4600);
+ vpll = samsung_clk_register_pll46xx("fout_vpll", "mout_vpllsrc",
+ reg_base + VPLL_CON0, pll_4650c);
+ } else {
+ apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
+ reg_base + APLL_CON0);
+ mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
+ reg_base + E4X12_MPLL_CON0);
+ epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
+ reg_base + EPLL_CON0);
+ vpll = samsung_clk_register_pll36xx("fout_vpll", "fin_pll",
+ reg_base + VPLL_CON0);
+ }
+
+ samsung_clk_add_lookup(apll, fout_apll);
+ samsung_clk_add_lookup(mpll, fout_mpll);
+ samsung_clk_add_lookup(epll, fout_epll);
+ samsung_clk_add_lookup(vpll, fout_vpll);
+
+ samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_clks));
+ samsung_clk_register_mux(exynos4_mux_clks,
+ ARRAY_SIZE(exynos4_mux_clks));
+ samsung_clk_register_div(exynos4_div_clks,
+ ARRAY_SIZE(exynos4_div_clks));
+ samsung_clk_register_gate(exynos4_gate_clks,
+ ARRAY_SIZE(exynos4_gate_clks));
+
+ if (exynos4_soc == EXYNOS4210) {
+ samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+ ARRAY_SIZE(exynos4210_fixed_rate_clks));
+ samsung_clk_register_mux(exynos4210_mux_clks,
+ ARRAY_SIZE(exynos4210_mux_clks));
+ samsung_clk_register_div(exynos4210_div_clks,
+ ARRAY_SIZE(exynos4210_div_clks));
+ samsung_clk_register_gate(exynos4210_gate_clks,
+ ARRAY_SIZE(exynos4210_gate_clks));
+ } else {
+ samsung_clk_register_mux(exynos4x12_mux_clks,
+ ARRAY_SIZE(exynos4x12_mux_clks));
+ samsung_clk_register_div(exynos4x12_div_clks,
+ ARRAY_SIZE(exynos4x12_div_clks));
+ samsung_clk_register_gate(exynos4x12_gate_clks,
+ ARRAY_SIZE(exynos4x12_gate_clks));
+ }
+
+ pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
+ "\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n",
+ exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
+ _get_rate("sclk_apll"), _get_rate("sclk_mpll"),
+ _get_rate("sclk_epll"), _get_rate("sclk_vpll"),
+ _get_rate("arm_clk"));
+}
+CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4_clk_init);
+CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5250 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <plat/cpu.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_CPU 0x200
+#define DIV_CPU0 0x500
+#define SRC_CORE1 0x4204
+#define SRC_TOP0 0x10210
+#define SRC_TOP2 0x10218
+#define SRC_GSCL 0x10220
+#define SRC_DISP1_0 0x1022c
+#define SRC_MAU 0x10240
+#define SRC_FSYS 0x10244
+#define SRC_GEN 0x10248
+#define SRC_PERIC0 0x10250
+#define SRC_PERIC1 0x10254
+#define SRC_MASK_GSCL 0x10320
+#define SRC_MASK_DISP1_0 0x1032c
+#define SRC_MASK_MAU 0x10334
+#define SRC_MASK_FSYS 0x10340
+#define SRC_MASK_GEN 0x10344
+#define SRC_MASK_PERIC0 0x10350
+#define SRC_MASK_PERIC1 0x10354
+#define DIV_TOP0 0x10510
+#define DIV_TOP1 0x10514
+#define DIV_GSCL 0x10520
+#define DIV_DISP1_0 0x1052c
+#define DIV_GEN 0x1053c
+#define DIV_MAU 0x10544
+#define DIV_FSYS0 0x10548
+#define DIV_FSYS1 0x1054c
+#define DIV_FSYS2 0x10550
+#define DIV_PERIC0 0x10558
+#define DIV_PERIC1 0x1055c
+#define DIV_PERIC2 0x10560
+#define DIV_PERIC3 0x10564
+#define DIV_PERIC4 0x10568
+#define DIV_PERIC5 0x1056c
+#define GATE_IP_GSCL 0x10920
+#define GATE_IP_MFC 0x1092c
+#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
+#define SRC_CDREX 0x20200
+#define PLL_DIV2_SEL 0x20a24
+#define GATE_IP_DISP1 0x10928
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms. The clocks are categorized into three
+ * sections: core, sclk gate and bus interface gate clocks.
+ *
+ * When adding a new clock to this list, it is advised to choose a clock
+ * category and add it to the end of that category. That is because the the
+ * device tree source file is referring to these ids and any change in the
+ * sequence number of existing clocks will require corresponding change in the
+ * device tree files. This limitation would go away when pre-processor support
+ * for dtc would be available.
+ */
+enum exynos5250_clks {
+ none,
+
+ /* core clocks */
+ fin_pll,
+
+ /* gate for special clocks (sclk) */
+ sclk_cam_bayer = 128, sclk_cam0, sclk_cam1, sclk_gscl_wa, sclk_gscl_wb,
+ sclk_fimd1, sclk_mipi1, sclk_dp, sclk_hdmi, sclk_pixel, sclk_audio0,
+ sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3,
+ sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm,
+ sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+
+ /* gate clocks */
+ gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0,
+ smmu_gscl1, smmu_gscl2, smmu_gscl3, mfc, smmu_mfcl, smmu_mfcr, rotator,
+ jpeg, mdma1, smmu_rotator, smmu_jpeg, smmu_mdma1, pdma0, pdma1, sata,
+ usbotg, mipi_hsi, sdmmc0, sdmmc1, sdmmc2, sdmmc3, sromc, usb2, usb3,
+ sata_phyctrl, sata_phyi2c, uart0, uart1, uart2, uart3, uart4, i2c0,
+ i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, adc, spi0, spi1,
+ spi2, i2s1, i2s2, pcm1, pcm2, pwm, spdif, ac97, hsi2c0, hsi2c1, hsi2c2,
+ hsi2c3, chipid, sysreg, pmu, cmu_top, cmu_core, cmu_mem, tzpc0, tzpc1,
+ tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7, tzpc8, tzpc9, hdmi_cec, mct,
+ wdt, rtc, tmu, fimd1, mie1, dsim0, dp, mixer, hdmi,
+
+ nr_clks,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static __initdata unsigned long exynos5250_clk_regs[] = {
+ SRC_CPU,
+ DIV_CPU0,
+ SRC_CORE1,
+ SRC_TOP0,
+ SRC_TOP2,
+ SRC_GSCL,
+ SRC_DISP1_0,
+ SRC_MAU,
+ SRC_FSYS,
+ SRC_GEN,
+ SRC_PERIC0,
+ SRC_PERIC1,
+ SRC_MASK_GSCL,
+ SRC_MASK_DISP1_0,
+ SRC_MASK_MAU,
+ SRC_MASK_FSYS,
+ SRC_MASK_GEN,
+ SRC_MASK_PERIC0,
+ SRC_MASK_PERIC1,
+ DIV_TOP0,
+ DIV_TOP1,
+ DIV_GSCL,
+ DIV_DISP1_0,
+ DIV_GEN,
+ DIV_MAU,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_PERIC0,
+ DIV_PERIC1,
+ DIV_PERIC2,
+ DIV_PERIC3,
+ DIV_PERIC4,
+ DIV_PERIC5,
+ GATE_IP_GSCL,
+ GATE_IP_MFC,
+ GATE_IP_GEN,
+ GATE_IP_FSYS,
+ GATE_IP_PERIC,
+ GATE_IP_PERIS,
+ SRC_CDREX,
+ PLL_DIV2_SEL,
+ GATE_IP_DISP1,
+};
+
+/* list of all parent clock list */
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", };
+PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" };
+PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" };
+PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" };
+PNAME(mout_bpll_p) = { "fin_pll", "mout_bpll_fout" };
+PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi27m" };
+PNAME(mout_vpll_p) = { "mout_vpllsrc", "fout_vpll" };
+PNAME(mout_cpll_p) = { "fin_pll", "fout_cpll" };
+PNAME(mout_epll_p) = { "fin_pll", "fout_epll" };
+PNAME(mout_mpll_user_p) = { "fin_pll", "sclk_mpll" };
+PNAME(mout_bpll_user_p) = { "fin_pll", "sclk_bpll" };
+PNAME(mout_aclk166_p) = { "sclk_cpll", "sclk_mpll_user" };
+PNAME(mout_aclk200_p) = { "sclk_mpll_user", "sclk_bpll_user" };
+PNAME(mout_hdmi_p) = { "div_hdmi_pixel", "sclk_hdmiphy" };
+PNAME(mout_usb3_p) = { "sclk_mpll_user", "sclk_cpll" };
+PNAME(mout_group1_p) = { "fin_pll", "fin_pll", "sclk_hdmi27m",
+ "sclk_dptxphy", "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_audio0_p) = { "cdclk0", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy",
+ "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_audio1_p) = { "cdclk1", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy",
+ "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_audio2_p) = { "cdclk2", "fin_pll", "sclk_hdmi27m", "sclk_dptxphy",
+ "sclk_uhostphy", "sclk_hdmiphy",
+ "sclk_mpll_user", "sclk_epll", "sclk_vpll",
+ "sclk_cpll" };
+PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2",
+ "spdif_extclk" };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos5250_fixed_rate_ext_clks[] __initdata = {
+ FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock exynos5250_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_hdmi27m", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(none, "sclk_dptxphy", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_uhostphy", NULL, CLK_IS_ROOT, 48000000),
+};
+
+struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
+ FFACTOR(none, "fout_mplldiv2", "fout_mpll", 1, 2, 0),
+ FFACTOR(none, "fout_bplldiv2", "fout_bpll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
+ MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+ MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+ MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1),
+ MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1),
+ MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1),
+ MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1),
+ MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1),
+ MUX(none, "sclk_vpll", mout_vpll_p, SRC_TOP2, 16, 1),
+ MUX(none, "sclk_epll", mout_epll_p, SRC_TOP2, 12, 1),
+ MUX(none, "sclk_cpll", mout_cpll_p, SRC_TOP2, 8, 1),
+ MUX(none, "sclk_mpll_user", mout_mpll_user_p, SRC_TOP2, 20, 1),
+ MUX(none, "sclk_bpll_user", mout_bpll_user_p, SRC_TOP2, 24, 1),
+ MUX(none, "mout_aclk166", mout_aclk166_p, SRC_TOP0, 8, 1),
+ MUX(none, "mout_aclk333", mout_aclk166_p, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk200", mout_aclk200_p, SRC_TOP0, 12, 1),
+ MUX(none, "mout_cam_bayer", mout_group1_p, SRC_GSCL, 12, 4),
+ MUX(none, "mout_cam0", mout_group1_p, SRC_GSCL, 16, 4),
+ MUX(none, "mout_cam1", mout_group1_p, SRC_GSCL, 20, 4),
+ MUX(none, "mout_gscl_wa", mout_group1_p, SRC_GSCL, 24, 4),
+ MUX(none, "mout_gscl_wb", mout_group1_p, SRC_GSCL, 28, 4),
+ MUX(none, "mout_fimd1", mout_group1_p, SRC_DISP1_0, 0, 4),
+ MUX(none, "mout_mipi1", mout_group1_p, SRC_DISP1_0, 12, 4),
+ MUX(none, "mout_dp", mout_group1_p, SRC_DISP1_0, 16, 4),
+ MUX(none, "mout_hdmi", mout_hdmi_p, SRC_DISP1_0, 20, 1),
+ MUX(none, "mout_audio0", mout_audio0_p, SRC_MAU, 0, 4),
+ MUX(none, "mout_mmc0", mout_group1_p, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", mout_group1_p, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", mout_group1_p, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", mout_group1_p, SRC_FSYS, 12, 4),
+ MUX(none, "mout_sata", mout_aclk200_p, SRC_FSYS, 24, 1),
+ MUX(none, "mout_usb3", mout_usb3_p, SRC_FSYS, 28, 1),
+ MUX(none, "mout_jpeg", mout_group1_p, SRC_GEN, 0, 4),
+ MUX(none, "mout_uart0", mout_group1_p, SRC_PERIC0, 0, 4),
+ MUX(none, "mout_uart1", mout_group1_p, SRC_PERIC0, 4, 4),
+ MUX(none, "mout_uart2", mout_group1_p, SRC_PERIC0, 8, 4),
+ MUX(none, "mout_uart3", mout_group1_p, SRC_PERIC0, 12, 4),
+ MUX(none, "mout_pwm", mout_group1_p, SRC_PERIC0, 24, 4),
+ MUX(none, "mout_audio1", mout_audio1_p, SRC_PERIC1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p, SRC_PERIC1, 4, 4),
+ MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIC1, 8, 2),
+ MUX(none, "mout_spi0", mout_group1_p, SRC_PERIC1, 16, 4),
+ MUX(none, "mout_spi1", mout_group1_p, SRC_PERIC1, 20, 4),
+ MUX(none, "mout_spi2", mout_group1_p, SRC_PERIC1, 24, 4),
+};
+
+struct samsung_div_clock exynos5250_div_clks[] __initdata = {
+ DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+ DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
+ DIV(none, "aclk66_pre", "sclk_mpll_user", DIV_TOP1, 24, 3),
+ DIV(none, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
+ DIV(none, "aclk266", "sclk_mpll_user", DIV_TOP0, 16, 3),
+ DIV(none, "aclk166", "mout_aclk166", DIV_TOP0, 8, 3),
+ DIV(none, "aclk333", "mout_aclk333", DIV_TOP0, 20, 3),
+ DIV(none, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
+ DIV(none, "div_cam_bayer", "mout_cam_bayer", DIV_GSCL, 12, 4),
+ DIV(none, "div_cam0", "mout_cam0", DIV_GSCL, 16, 4),
+ DIV(none, "div_cam1", "mout_cam1", DIV_GSCL, 20, 4),
+ DIV(none, "div_gscl_wa", "mout_gscl_wa", DIV_GSCL, 24, 4),
+ DIV(none, "div_gscl_wb", "mout_gscl_wb", DIV_GSCL, 28, 4),
+ DIV(none, "div_fimd1", "mout_fimd1", DIV_DISP1_0, 0, 4),
+ DIV(none, "div_mipi1", "mout_mipi1", DIV_DISP1_0, 16, 4),
+ DIV(none, "div_dp", "mout_dp", DIV_DISP1_0, 24, 4),
+ DIV(none, "div_jpeg", "mout_jpeg", DIV_GEN, 4, 4),
+ DIV(none, "div_audio0", "mout_audio0", DIV_MAU, 0, 4),
+ DIV(none, "div_pcm0", "sclk_audio0", DIV_MAU, 4, 8),
+ DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
+ DIV(none, "div_usb3", "mout_usb3", DIV_FSYS0, 24, 4),
+ DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 8, 8),
+ DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 24, 8),
+ DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 8, 8),
+ DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 24, 8),
+ DIV(none, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
+ DIV(none, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
+ DIV(none, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
+ DIV(none, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
+ DIV(none, "div_spi0", "mout_spi0", DIV_PERIC1, 0, 4),
+ DIV(none, "div_spi1", "mout_spi1", DIV_PERIC1, 16, 4),
+ DIV(none, "div_spi2", "mout_spi2", DIV_PERIC2, 0, 4),
+ DIV(none, "div_pwm", "mout_pwm", DIV_PERIC3, 0, 4),
+ DIV(none, "div_audio1", "mout_audio1", DIV_PERIC4, 0, 4),
+ DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8),
+ DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4),
+ DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8),
+ DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
+ DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
+ DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4),
+ DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"),
+ DIV_F(none, "div_mipi1_pre", "div_mipi1",
+ DIV_DISP1_0, 20, 4, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre0", "div_mmc0",
+ DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre1", "div_mmc1",
+ DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre2", "div_mmc2",
+ DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre3", "div_mmc3",
+ DIV_FSYS2, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_spi_pre0", "div_spi0",
+ DIV_PERIC1, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_spi_pre1", "div_spi1",
+ DIV_PERIC1, 24, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_spi_pre2", "div_spi2",
+ DIV_PERIC2, 8, 8, CLK_SET_RATE_PARENT, 0),
+};
+
+struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
+ GATE(gscl0, "gscl0", "none", GATE_IP_GSCL, 0, 0, 0),
+ GATE(gscl1, "gscl1", "none", GATE_IP_GSCL, 1, 0, 0),
+ GATE(gscl2, "gscl2", "aclk266", GATE_IP_GSCL, 2, 0, 0),
+ GATE(gscl3, "gscl3", "aclk266", GATE_IP_GSCL, 3, 0, 0),
+ GATE(gscl_wa, "gscl_wa", "div_gscl_wa", GATE_IP_GSCL, 5, 0, 0),
+ GATE(gscl_wb, "gscl_wb", "div_gscl_wb", GATE_IP_GSCL, 6, 0, 0),
+ GATE(smmu_gscl0, "smmu_gscl0", "aclk266", GATE_IP_GSCL, 7, 0, 0),
+ GATE(smmu_gscl1, "smmu_gscl1", "aclk266", GATE_IP_GSCL, 8, 0, 0),
+ GATE(smmu_gscl2, "smmu_gscl2", "aclk266", GATE_IP_GSCL, 9, 0, 0),
+ GATE(smmu_gscl3, "smmu_gscl3", "aclk266", GATE_IP_GSCL, 10, 0, 0),
+ GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
+ GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
+ GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
+ GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
+ GATE(jpeg, "jpeg", "aclk166", GATE_IP_GEN, 2, 0, 0),
+ GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
+ GATE(smmu_jpeg, "smmu_jpeg", "aclk166", GATE_IP_GEN, 7, 0, 0),
+ GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
+ GATE(pdma0, "pdma0", "aclk200", GATE_IP_FSYS, 1, 0, 0),
+ GATE(pdma1, "pdma1", "aclk200", GATE_IP_FSYS, 2, 0, 0),
+ GATE(sata, "sata", "aclk200", GATE_IP_FSYS, 6, 0, 0),
+ GATE(usbotg, "usbotg", "aclk200", GATE_IP_FSYS, 7, 0, 0),
+ GATE(mipi_hsi, "mipi_hsi", "aclk200", GATE_IP_FSYS, 8, 0, 0),
+ GATE(sdmmc0, "sdmmc0", "aclk200", GATE_IP_FSYS, 12, 0, 0),
+ GATE(sdmmc1, "sdmmc1", "aclk200", GATE_IP_FSYS, 13, 0, 0),
+ GATE(sdmmc2, "sdmmc2", "aclk200", GATE_IP_FSYS, 14, 0, 0),
+ GATE(sdmmc3, "sdmmc3", "aclk200", GATE_IP_FSYS, 15, 0, 0),
+ GATE(sromc, "sromc", "aclk200", GATE_IP_FSYS, 17, 0, 0),
+ GATE(usb2, "usb2", "aclk200", GATE_IP_FSYS, 18, 0, 0),
+ GATE(usb3, "usb3", "aclk200", GATE_IP_FSYS, 19, 0, 0),
+ GATE(sata_phyctrl, "sata_phyctrl", "aclk200", GATE_IP_FSYS, 24, 0, 0),
+ GATE(sata_phyi2c, "sata_phyi2c", "aclk200", GATE_IP_FSYS, 25, 0, 0),
+ GATE(uart0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
+ GATE(uart1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
+ GATE(uart2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+ GATE(uart3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+ GATE(uart4, "uart4", "aclk66", GATE_IP_PERIC, 4, 0, 0),
+ GATE(i2c0, "i2c0", "aclk66", GATE_IP_PERIC, 6, 0, 0),
+ GATE(i2c1, "i2c1", "aclk66", GATE_IP_PERIC, 7, 0, 0),
+ GATE(i2c2, "i2c2", "aclk66", GATE_IP_PERIC, 8, 0, 0),
+ GATE(i2c3, "i2c3", "aclk66", GATE_IP_PERIC, 9, 0, 0),
+ GATE(i2c4, "i2c4", "aclk66", GATE_IP_PERIC, 10, 0, 0),
+ GATE(i2c5, "i2c5", "aclk66", GATE_IP_PERIC, 11, 0, 0),
+ GATE(i2c6, "i2c6", "aclk66", GATE_IP_PERIC, 12, 0, 0),
+ GATE(i2c7, "i2c7", "aclk66", GATE_IP_PERIC, 13, 0, 0),
+ GATE(i2c_hdmi, "i2c_hdmi", "aclk66", GATE_IP_PERIC, 14, 0, 0),
+ GATE(adc, "adc", "aclk66", GATE_IP_PERIC, 15, 0, 0),
+ GATE(spi0, "spi0", "aclk66", GATE_IP_PERIC, 16, 0, 0),
+ GATE(spi1, "spi1", "aclk66", GATE_IP_PERIC, 17, 0, 0),
+ GATE(spi2, "spi2", "aclk66", GATE_IP_PERIC, 18, 0, 0),
+ GATE(i2s1, "i2s1", "aclk66", GATE_IP_PERIC, 20, 0, 0),
+ GATE(i2s2, "i2s2", "aclk66", GATE_IP_PERIC, 21, 0, 0),
+ GATE(pcm1, "pcm1", "aclk66", GATE_IP_PERIC, 22, 0, 0),
+ GATE(pcm2, "pcm2", "aclk66", GATE_IP_PERIC, 23, 0, 0),
+ GATE(pwm, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
+ GATE(spdif, "spdif", "aclk66", GATE_IP_PERIC, 26, 0, 0),
+ GATE(ac97, "ac97", "aclk66", GATE_IP_PERIC, 27, 0, 0),
+ GATE(hsi2c0, "hsi2c0", "aclk66", GATE_IP_PERIC, 28, 0, 0),
+ GATE(hsi2c1, "hsi2c1", "aclk66", GATE_IP_PERIC, 29, 0, 0),
+ GATE(hsi2c2, "hsi2c2", "aclk66", GATE_IP_PERIC, 30, 0, 0),
+ GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0),
+ GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0),
+ GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0),
+ GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0),
+ GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0),
+ GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0),
+ GATE(tzpc3, "tzpc3", "aclk66", GATE_IP_PERIS, 9, 0, 0),
+ GATE(tzpc4, "tzpc4", "aclk66", GATE_IP_PERIS, 10, 0, 0),
+ GATE(tzpc5, "tzpc5", "aclk66", GATE_IP_PERIS, 11, 0, 0),
+ GATE(tzpc6, "tzpc6", "aclk66", GATE_IP_PERIS, 12, 0, 0),
+ GATE(tzpc7, "tzpc7", "aclk66", GATE_IP_PERIS, 13, 0, 0),
+ GATE(tzpc8, "tzpc8", "aclk66", GATE_IP_PERIS, 14, 0, 0),
+ GATE(tzpc9, "tzpc9", "aclk66", GATE_IP_PERIS, 15, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk66", GATE_IP_PERIS, 16, 0, 0),
+ GATE(mct, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+ GATE(wdt, "wdt", "aclk66", GATE_IP_PERIS, 19, 0, 0),
+ GATE(rtc, "rtc", "aclk66", GATE_IP_PERIS, 20, 0, 0),
+ GATE(tmu, "tmu", "aclk66", GATE_IP_PERIS, 21, 0, 0),
+ GATE(cmu_top, "cmu_top", "aclk66",
+ GATE_IP_PERIS, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(cmu_core, "cmu_core", "aclk66",
+ GATE_IP_PERIS, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(cmu_mem, "cmu_mem", "aclk66",
+ GATE_IP_PERIS, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(sclk_cam_bayer, "sclk_cam_bayer", "div_cam_bayer",
+ SRC_MASK_GSCL, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam0, "sclk_cam0", "div_cam0",
+ SRC_MASK_GSCL, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam1, "sclk_cam1", "div_cam1",
+ SRC_MASK_GSCL, 20, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_gscl_wa, "sclk_gscl_wa", "div_gscl_wa",
+ SRC_MASK_GSCL, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_gscl_wb, "sclk_gscl_wb", "div_gscl_wb",
+ SRC_MASK_GSCL, 28, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_fimd1, "sclk_fimd1", "div_fimd1",
+ SRC_MASK_DISP1_0, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipi1, "sclk_mipi1", "div_mipi1",
+ SRC_MASK_DISP1_0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_dp, "sclk_dp", "div_dp",
+ SRC_MASK_DISP1_0, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi",
+ SRC_MASK_DISP1_0, 20, 0, 0),
+ GATE(sclk_audio0, "sclk_audio0", "div_audio0",
+ SRC_MASK_MAU, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc0, "sclk_mmc0", "div_mmc0",
+ SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc1, "sclk_mmc1", "div_mmc1",
+ SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc2, "sclk_mmc2", "div_mmc2",
+ SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mmc3, "sclk_mmc3", "div_mmc3",
+ SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_sata, "sclk_sata", "div_sata",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_usb3, "sclk_usb3", "div_usb3",
+ SRC_MASK_FSYS, 28, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_jpeg, "sclk_jpeg", "div_jpeg",
+ SRC_MASK_GEN, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart0, "sclk_uart0", "div_uart0",
+ SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart1, "sclk_uart1", "div_uart1",
+ SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart2, "sclk_uart2", "div_uart2",
+ SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart3, "sclk_uart3", "div_uart3",
+ SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_pwm, "sclk_pwm", "div_pwm",
+ SRC_MASK_PERIC0, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio1, "sclk_audio1", "div_audio1",
+ SRC_MASK_PERIC1, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio2, "sclk_audio2", "div_audio2",
+ SRC_MASK_PERIC1, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spdif, "sclk_spdif", "mout_spdif",
+ SRC_MASK_PERIC1, 4, 0, 0),
+ GATE(sclk_spi0, "sclk_spi0", "div_spi_pre0",
+ SRC_MASK_PERIC1, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi1, "sclk_spi1", "div_spi_pre1",
+ SRC_MASK_PERIC1, 20, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi2, "sclk_spi2", "div_spi_pre2",
+ SRC_MASK_PERIC1, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(fimd1, "fimd1", "aclk200", GATE_IP_DISP1, 0, 0, 0),
+ GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
+ GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
+ GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
+ GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
+ GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
+};
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xxti", .data = (void *)0, },
+ { },
+};
+
+/* register exynox5250 clocks */
+void __init exynos5250_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *apll, *mpll, *epll, *vpll, *bpll, *gpll, *cpll;
+
+ if (np) {
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ } else {
+ panic("%s: unable to determine soc\n", __func__);
+ }
+
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos5250_clk_regs, ARRAY_SIZE(exynos5250_clk_regs),
+ NULL, 0);
+ samsung_clk_of_register_fixed_ext(exynos5250_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5250_fixed_rate_ext_clks),
+ ext_clk_match);
+
+ apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
+ reg_base + 0x100);
+ mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
+ reg_base + 0x4100);
+ bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll",
+ reg_base + 0x20110);
+ gpll = samsung_clk_register_pll35xx("fout_gpll", "fin_pll",
+ reg_base + 0x10150);
+ cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll",
+ reg_base + 0x10120);
+ epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
+ reg_base + 0x10130);
+ vpll = samsung_clk_register_pll36xx("fout_vpll", "mout_vpllsrc",
+ reg_base + 0x10140);
+
+ samsung_clk_register_fixed_rate(exynos5250_fixed_rate_clks,
+ ARRAY_SIZE(exynos5250_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(exynos5250_fixed_factor_clks,
+ ARRAY_SIZE(exynos5250_fixed_factor_clks));
+ samsung_clk_register_mux(exynos5250_mux_clks,
+ ARRAY_SIZE(exynos5250_mux_clks));
+ samsung_clk_register_div(exynos5250_div_clks,
+ ARRAY_SIZE(exynos5250_div_clks));
+ samsung_clk_register_gate(exynos5250_gate_clks,
+ ARRAY_SIZE(exynos5250_gate_clks));
+
+ pr_info("Exynos5250: clock setup completed, armclk=%ld\n",
+ _get_rate("armclk"));
+}
+CLK_OF_DECLARE(exynos5250_clk, "samsung,exynos5250-clock", exynos5250_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5440 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <plat/cpu.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+#define CLKEN_OV_VAL 0xf8
+#define CPU_CLK_STATUS 0xfc
+#define MISC_DOUT1 0x558
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms.
+ */
+enum exynos5440_clks {
+ none, xtal, arm_clk,
+
+ spi_baud = 16, pb0_250, pr0_250, pr1_250, b_250, b_125, b_200, sata,
+ usb, gmac0, cs250, pb0_250_o, pr0_250_o, pr1_250_o, b_250_o, b_125_o,
+ b_200_o, sata_o, usb_o, gmac0_o, cs250_o,
+
+ nr_clks,
+};
+
+/* parent clock name list */
+PNAME(mout_armclk_p) = { "cplla", "cpllb" };
+PNAME(mout_spi_p) = { "div125", "div200" };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos5440_fixed_rate_ext_clks[] __initdata = {
+ FRATE(none, "xtal", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks */
+struct samsung_fixed_rate_clock exynos5440_fixed_rate_clks[] __initdata = {
+ FRATE(none, "ppll", NULL, CLK_IS_ROOT, 1000000000),
+ FRATE(none, "usb_phy0", NULL, CLK_IS_ROOT, 60000000),
+ FRATE(none, "usb_phy1", NULL, CLK_IS_ROOT, 60000000),
+ FRATE(none, "usb_ohci12", NULL, CLK_IS_ROOT, 12000000),
+ FRATE(none, "usb_ohci48", NULL, CLK_IS_ROOT, 48000000),
+};
+
+/* fixed factor clocks */
+struct samsung_fixed_factor_clock exynos5440_fixed_factor_clks[] __initdata = {
+ FFACTOR(none, "div250", "ppll", 1, 4, 0),
+ FFACTOR(none, "div200", "ppll", 1, 5, 0),
+ FFACTOR(none, "div125", "div250", 1, 2, 0),
+};
+
+/* mux clocks */
+struct samsung_mux_clock exynos5440_mux_clks[] __initdata = {
+ MUX(none, "mout_spi", mout_spi_p, MISC_DOUT1, 5, 1),
+ MUX_A(arm_clk, "arm_clk", mout_armclk_p,
+ CPU_CLK_STATUS, 0, 1, "armclk"),
+};
+
+/* divider clocks */
+struct samsung_div_clock exynos5440_div_clks[] __initdata = {
+ DIV(spi_baud, "div_spi", "mout_spi", MISC_DOUT1, 3, 2),
+};
+
+/* gate clocks */
+struct samsung_gate_clock exynos5440_gate_clks[] __initdata = {
+ GATE(pb0_250, "pb0_250", "div250", CLKEN_OV_VAL, 3, 0, 0),
+ GATE(pr0_250, "pr0_250", "div250", CLKEN_OV_VAL, 4, 0, 0),
+ GATE(pr1_250, "pr1_250", "div250", CLKEN_OV_VAL, 5, 0, 0),
+ GATE(b_250, "b_250", "div250", CLKEN_OV_VAL, 9, 0, 0),
+ GATE(b_125, "b_125", "div125", CLKEN_OV_VAL, 10, 0, 0),
+ GATE(b_200, "b_200", "div200", CLKEN_OV_VAL, 11, 0, 0),
+ GATE(sata, "sata", "div200", CLKEN_OV_VAL, 12, 0, 0),
+ GATE(usb, "usb", "div200", CLKEN_OV_VAL, 13, 0, 0),
+ GATE(gmac0, "gmac0", "div200", CLKEN_OV_VAL, 14, 0, 0),
+ GATE(cs250, "cs250", "div250", CLKEN_OV_VAL, 19, 0, 0),
+ GATE(pb0_250_o, "pb0_250_o", "pb0_250", CLKEN_OV_VAL, 3, 0, 0),
+ GATE(pr0_250_o, "pr0_250_o", "pr0_250", CLKEN_OV_VAL, 4, 0, 0),
+ GATE(pr1_250_o, "pr1_250_o", "pr1_250", CLKEN_OV_VAL, 5, 0, 0),
+ GATE(b_250_o, "b_250_o", "b_250", CLKEN_OV_VAL, 9, 0, 0),
+ GATE(b_125_o, "b_125_o", "b_125", CLKEN_OV_VAL, 10, 0, 0),
+ GATE(b_200_o, "b_200_o", "b_200", CLKEN_OV_VAL, 11, 0, 0),
+ GATE(sata_o, "sata_o", "sata", CLKEN_OV_VAL, 12, 0, 0),
+ GATE(usb_o, "usb_o", "usb", CLKEN_OV_VAL, 13, 0, 0),
+ GATE(gmac0_o, "gmac0_o", "gmac", CLKEN_OV_VAL, 14, 0, 0),
+ GATE(cs250_o, "cs250_o", "cs250", CLKEN_OV_VAL, 19, 0, 0),
+};
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xtal", .data = (void *)0, },
+ {},
+};
+
+/* register exynos5440 clocks */
+void __init exynos5440_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: failed to map clock controller registers,"
+ " aborting clock initialization\n", __func__);
+ return;
+ }
+
+ samsung_clk_init(np, reg_base, nr_clks, NULL, 0, NULL, 0);
+ samsung_clk_of_register_fixed_ext(exynos5440_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos5440_fixed_rate_ext_clks), ext_clk_match);
+
+ samsung_clk_register_pll2550x("cplla", "xtal", reg_base + 0x1c, 0x10);
+ samsung_clk_register_pll2550x("cpllb", "xtal", reg_base + 0x20, 0x10);
+
+ samsung_clk_register_fixed_rate(exynos5440_fixed_rate_clks,
+ ARRAY_SIZE(exynos5440_fixed_rate_clks));
+ samsung_clk_register_fixed_factor(exynos5440_fixed_factor_clks,
+ ARRAY_SIZE(exynos5440_fixed_factor_clks));
+ samsung_clk_register_mux(exynos5440_mux_clks,
+ ARRAY_SIZE(exynos5440_mux_clks));
+ samsung_clk_register_div(exynos5440_div_clks,
+ ARRAY_SIZE(exynos5440_div_clks));
+ samsung_clk_register_gate(exynos5440_gate_clks,
+ ARRAY_SIZE(exynos5440_gate_clks));
+
+ pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("armclk"));
+ pr_info("exynos5440 clock initialization complete\n");
+}
+CLK_OF_DECLARE(exynos5440_clk, "samsung,exynos5440-clock", exynos5440_clk_init);
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the utility functions to register the pll clocks.
+*/
+
+#include <linux/errno.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+/*
+ * PLL35xx Clock Type
+ */
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+struct samsung_clk_pll35xx {
+ struct clk_hw hw;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll35xx(_hw) container_of(_hw, struct samsung_clk_pll35xx, hw)
+
+static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll35xx *pll = to_clk_pll35xx(hw);
+ u32 mdiv, pdiv, sdiv, pll_con;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll35xx_clk_ops = {
+ .recalc_rate = samsung_pll35xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll35xx(const char *name,
+ const char *pname, const void __iomem *con_reg)
+{
+ struct samsung_clk_pll35xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll35xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL36xx Clock Type
+ */
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+struct samsung_clk_pll36xx {
+ struct clk_hw hw;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll36xx(_hw) container_of(_hw, struct samsung_clk_pll36xx, hw)
+
+static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw);
+ u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con1 = __raw_readl(pll->con_reg + 4);
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ fvco *= (mdiv << 16) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= 16;
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll36xx_clk_ops = {
+ .recalc_rate = samsung_pll36xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll36xx(const char *name,
+ const char *pname, const void __iomem *con_reg)
+{
+ struct samsung_clk_pll36xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll36xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL45xx Clock Type
+ */
+
+#define PLL45XX_MDIV_MASK (0x3FF)
+#define PLL45XX_PDIV_MASK (0x3F)
+#define PLL45XX_SDIV_MASK (0x7)
+#define PLL45XX_MDIV_SHIFT (16)
+#define PLL45XX_PDIV_SHIFT (8)
+#define PLL45XX_SDIV_SHIFT (0)
+
+struct samsung_clk_pll45xx {
+ struct clk_hw hw;
+ enum pll45xx_type type;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll45xx(_hw) container_of(_hw, struct samsung_clk_pll45xx, hw)
+
+static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll45xx *pll = to_clk_pll45xx(hw);
+ u32 mdiv, pdiv, sdiv, pll_con;
+ u64 fvco = parent_rate;
+
+ pll_con = __raw_readl(pll->con_reg);
+ mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
+
+ if (pll->type == pll_4508)
+ sdiv = sdiv - 1;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll45xx_clk_ops = {
+ .recalc_rate = samsung_pll45xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll45xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll45xx_type type)
+{
+ struct samsung_clk_pll45xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll45xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+ pll->type = type;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL46xx Clock Type
+ */
+
+#define PLL46XX_MDIV_MASK (0x1FF)
+#define PLL46XX_PDIV_MASK (0x3F)
+#define PLL46XX_SDIV_MASK (0x7)
+#define PLL46XX_MDIV_SHIFT (16)
+#define PLL46XX_PDIV_SHIFT (8)
+#define PLL46XX_SDIV_SHIFT (0)
+
+#define PLL46XX_KDIV_MASK (0xFFFF)
+#define PLL4650C_KDIV_MASK (0xFFF)
+#define PLL46XX_KDIV_SHIFT (0)
+
+struct samsung_clk_pll46xx {
+ struct clk_hw hw;
+ enum pll46xx_type type;
+ const void __iomem *con_reg;
+};
+
+#define to_clk_pll46xx(_hw) container_of(_hw, struct samsung_clk_pll46xx, hw)
+
+static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll46xx *pll = to_clk_pll46xx(hw);
+ u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift;
+ u64 fvco = parent_rate;
+
+ pll_con0 = __raw_readl(pll->con_reg);
+ pll_con1 = __raw_readl(pll->con_reg + 4);
+ mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+ kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
+ pll_con1 & PLL46XX_KDIV_MASK;
+
+ shift = pll->type == pll_4600 ? 16 : 10;
+ fvco *= (mdiv << shift) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= shift;
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll46xx_clk_ops = {
+ .recalc_rate = samsung_pll46xx_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll46xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll46xx_type type)
+{
+ struct samsung_clk_pll46xx *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll46xx_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->con_reg = con_reg;
+ pll->type = type;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
+
+/*
+ * PLL2550x Clock Type
+ */
+
+#define PLL2550X_R_MASK (0x1)
+#define PLL2550X_P_MASK (0x3F)
+#define PLL2550X_M_MASK (0x3FF)
+#define PLL2550X_S_MASK (0x7)
+#define PLL2550X_R_SHIFT (20)
+#define PLL2550X_P_SHIFT (14)
+#define PLL2550X_M_SHIFT (4)
+#define PLL2550X_S_SHIFT (0)
+
+struct samsung_clk_pll2550x {
+ struct clk_hw hw;
+ const void __iomem *reg_base;
+ unsigned long offset;
+};
+
+#define to_clk_pll2550x(_hw) container_of(_hw, struct samsung_clk_pll2550x, hw)
+
+static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll2550x *pll = to_clk_pll2550x(hw);
+ u32 r, p, m, s, pll_stat;
+ u64 fvco = parent_rate;
+
+ pll_stat = __raw_readl(pll->reg_base + pll->offset * 3);
+ r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK;
+ if (!r)
+ return 0;
+ p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK;
+ m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK;
+ s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK;
+
+ fvco *= m;
+ do_div(fvco, (p << s));
+
+ return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll2550x_clk_ops = {
+ .recalc_rate = samsung_pll2550x_recalc_rate,
+};
+
+struct clk * __init samsung_clk_register_pll2550x(const char *name,
+ const char *pname, const void __iomem *reg_base,
+ const unsigned long offset)
+{
+ struct samsung_clk_pll2550x *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll) {
+ pr_err("%s: could not allocate pll clk %s\n", __func__, name);
+ return NULL;
+ }
+
+ init.name = name;
+ init.ops = &samsung_pll2550x_clk_ops;
+ init.flags = CLK_GET_RATE_NOCACHE;
+ init.parent_names = &pname;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+ pll->reg_base = reg_base;
+ pll->offset = offset;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register pll clock %s\n", __func__,
+ name);
+ kfree(pll);
+ }
+
+ if (clk_register_clkdev(clk, name, NULL))
+ pr_err("%s: failed to register lookup for %s", __func__, name);
+
+ return clk;
+}
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all PLL's in Samsung platforms
+*/
+
+#ifndef __SAMSUNG_CLK_PLL_H
+#define __SAMSUNG_CLK_PLL_H
+
+enum pll45xx_type {
+ pll_4500,
+ pll_4502,
+ pll_4508
+};
+
+enum pll46xx_type {
+ pll_4600,
+ pll_4650,
+ pll_4650c,
+};
+
+extern struct clk * __init samsung_clk_register_pll35xx(const char *name,
+ const char *pname, const void __iomem *con_reg);
+extern struct clk * __init samsung_clk_register_pll36xx(const char *name,
+ const char *pname, const void __iomem *con_reg);
+extern struct clk * __init samsung_clk_register_pll45xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll45xx_type type);
+extern struct clk * __init samsung_clk_register_pll46xx(const char *name,
+ const char *pname, const void __iomem *con_reg,
+ enum pll46xx_type type);
+extern struct clk * __init samsung_clk_register_pll2550x(const char *name,
+ const char *pname, const void __iomem *reg_base,
+ const unsigned long offset);
+
+#endif /* __SAMSUNG_CLK_PLL_H */
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file includes utility functions to register clocks to common
+ * clock framework for Samsung platforms.
+*/
+
+#include <linux/syscore_ops.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+#ifdef CONFIG_OF
+static struct clk_onecell_data clk_data;
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *reg_dump;
+static unsigned long nr_reg_dump;
+
+static int samsung_clk_suspend(void)
+{
+ struct samsung_clk_reg_dump *rd = reg_dump;
+ unsigned long i;
+
+ for (i = 0; i < nr_reg_dump; i++, rd++)
+ rd->value = __raw_readl(reg_base + rd->offset);
+
+ return 0;
+}
+
+static void samsung_clk_resume(void)
+{
+ struct samsung_clk_reg_dump *rd = reg_dump;
+ unsigned long i;
+
+ for (i = 0; i < nr_reg_dump; i++, rd++)
+ __raw_writel(rd->value, reg_base + rd->offset);
+}
+
+static struct syscore_ops samsung_clk_syscore_ops = {
+ .suspend = samsung_clk_suspend,
+ .resume = samsung_clk_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+/* setup the essentials required to support clock lookup using ccf */
+void __init samsung_clk_init(struct device_node *np, void __iomem *base,
+ unsigned long nr_clks, unsigned long *rdump,
+ unsigned long nr_rdump, unsigned long *soc_rdump,
+ unsigned long nr_soc_rdump)
+{
+ reg_base = base;
+
+#ifdef CONFIG_PM_SLEEP
+ if (rdump && nr_rdump) {
+ unsigned int idx;
+ reg_dump = kzalloc(sizeof(struct samsung_clk_reg_dump)
+ * (nr_rdump + nr_soc_rdump), GFP_KERNEL);
+ if (!reg_dump) {
+ pr_err("%s: memory alloc for register dump failed\n",
+ __func__);
+ return;
+ }
+
+ for (idx = 0; idx < nr_rdump; idx++)
+ reg_dump[idx].offset = rdump[idx];
+ for (idx = 0; idx < nr_soc_rdump; idx++)
+ reg_dump[nr_rdump + idx].offset = soc_rdump[idx];
+ nr_reg_dump = nr_rdump + nr_soc_rdump;
+ register_syscore_ops(&samsung_clk_syscore_ops);
+ }
+#endif
+
+ clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL);
+ if (!clk_table)
+ panic("could not allocate clock lookup table\n");
+
+ if (!np)
+ return;
+
+#ifdef CONFIG_OF
+ clk_data.clks = clk_table;
+ clk_data.clk_num = nr_clks;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+#endif
+}
+
+/* add a clock instance to the clock lookup table used for dt based lookup */
+void samsung_clk_add_lookup(struct clk *clk, unsigned int id)
+{
+ if (clk_table && id)
+ clk_table[id] = clk;
+}
+
+/* register a list of aliases */
+void __init samsung_clk_register_alias(struct samsung_clock_alias *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ if (!clk_table) {
+ pr_err("%s: clock table missing\n", __func__);
+ return;
+ }
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ if (!list->id) {
+ pr_err("%s: clock id missing for index %d\n", __func__,
+ idx);
+ continue;
+ }
+
+ clk = clk_table[list->id];
+ if (!clk) {
+ pr_err("%s: failed to find clock %d\n", __func__,
+ list->id);
+ continue;
+ }
+
+ ret = clk_register_clkdev(clk, list->alias, list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+}
+
+/* register a list of fixed clocks */
+void __init samsung_clk_register_fixed_rate(
+ struct samsung_fixed_rate_clock *list, unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_fixed_rate(NULL, list->name,
+ list->parent_name, list->flags, list->fixed_rate);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+
+ /*
+ * Unconditionally add a clock lookup for the fixed rate clocks.
+ * There are not many of these on any of Samsung platforms.
+ */
+ ret = clk_register_clkdev(clk, list->name, NULL);
+ if (ret)
+ pr_err("%s: failed to register clock lookup for %s",
+ __func__, list->name);
+ }
+}
+
+/* register a list of fixed factor clocks */
+void __init samsung_clk_register_fixed_factor(
+ struct samsung_fixed_factor_clock *list, unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_fixed_factor(NULL, list->name,
+ list->parent_name, list->flags, list->mult, list->div);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+ }
+}
+
+/* register a list of mux clocks */
+void __init samsung_clk_register_mux(struct samsung_mux_clock *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_mux(NULL, list->name, list->parent_names,
+ list->num_parents, list->flags, reg_base + list->offset,
+ list->shift, list->width, list->mux_flags, &lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+
+ /* register a clock lookup only if a clock alias is specified */
+ if (list->alias) {
+ ret = clk_register_clkdev(clk, list->alias,
+ list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+ }
+}
+
+/* register a list of div clocks */
+void __init samsung_clk_register_div(struct samsung_div_clock *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ if (list->table)
+ clk = clk_register_divider_table(NULL, list->name,
+ list->parent_name, list->flags,
+ reg_base + list->offset, list->shift,
+ list->width, list->div_flags,
+ list->table, &lock);
+ else
+ clk = clk_register_divider(NULL, list->name,
+ list->parent_name, list->flags,
+ reg_base + list->offset, list->shift,
+ list->width, list->div_flags, &lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+
+ /* register a clock lookup only if a clock alias is specified */
+ if (list->alias) {
+ ret = clk_register_clkdev(clk, list->alias,
+ list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+ }
+}
+
+/* register a list of gate clocks */
+void __init samsung_clk_register_gate(struct samsung_gate_clock *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk;
+ unsigned int idx, ret;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ clk = clk_register_gate(NULL, list->name, list->parent_name,
+ list->flags, reg_base + list->offset,
+ list->bit_idx, list->gate_flags, &lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ /* register a clock lookup only if a clock alias is specified */
+ if (list->alias) {
+ ret = clk_register_clkdev(clk, list->alias,
+ list->dev_name);
+ if (ret)
+ pr_err("%s: failed to register lookup %s\n",
+ __func__, list->alias);
+ }
+
+ samsung_clk_add_lookup(clk, list->id);
+ }
+}
+
+/*
+ * obtain the clock speed of all external fixed clock sources from device
+ * tree and register it
+ */
+#ifdef CONFIG_OF
+void __init samsung_clk_of_register_fixed_ext(
+ struct samsung_fixed_rate_clock *fixed_rate_clk,
+ unsigned int nr_fixed_rate_clk,
+ struct of_device_id *clk_matches)
+{
+ const struct of_device_id *match;
+ struct device_node *np;
+ u32 freq;
+
+ for_each_matching_node_and_match(np, clk_matches, &match) {
+ if (of_property_read_u32(np, "clock-frequency", &freq))
+ continue;
+ fixed_rate_clk[(u32)match->data].fixed_rate = freq;
+ }
+ samsung_clk_register_fixed_rate(fixed_rate_clk, nr_fixed_rate_clk);
+}
+#endif
+
+/* utility function to get the rate of a specified clock */
+unsigned long _get_rate(const char *clk_name)
+{
+ struct clk *clk;
+ unsigned long rate;
+
+ clk = clk_get(NULL, clk_name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: could not find clock %s\n", __func__, clk_name);
+ return 0;
+ }
+ rate = clk_get_rate(clk);
+ clk_put(clk);
+ return rate;
+}
--- /dev/null
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all Samsung platforms
+*/
+
+#ifndef __SAMSUNG_CLK_H
+#define __SAMSUNG_CLK_H
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <mach/map.h>
+
+/**
+ * struct samsung_clock_alias: information about mux clock
+ * @id: platform specific id of the clock.
+ * @dev_name: name of the device to which this clock belongs.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_clock_alias {
+ unsigned int id;
+ const char *dev_name;
+ const char *alias;
+};
+
+#define ALIAS(_id, dname, a) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .alias = a, \
+ }
+
+/**
+ * struct samsung_fixed_rate_clock: information about fixed-rate clock
+ * @id: platform specific id of the clock.
+ * @name: name of this fixed-rate clock.
+ * @parent_name: optional parent clock name.
+ * @flags: optional fixed-rate clock flags.
+ * @fixed-rate: fixed clock rate of this clock.
+ */
+struct samsung_fixed_rate_clock {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long fixed_rate;
+};
+
+#define FRATE(_id, cname, pname, f, frate) \
+ { \
+ .id = _id, \
+ .name = cname, \
+ .parent_name = pname, \
+ .flags = f, \
+ .fixed_rate = frate, \
+ }
+
+/*
+ * struct samsung_fixed_factor_clock: information about fixed-factor clock
+ * @id: platform specific id of the clock.
+ * @name: name of this fixed-factor clock.
+ * @parent_name: parent clock name.
+ * @mult: fixed multiplication factor.
+ * @div: fixed division factor.
+ * @flags: optional fixed-factor clock flags.
+ */
+struct samsung_fixed_factor_clock {
+ unsigned int id;
+ char *name;
+ const char *parent_name;
+ unsigned long mult;
+ unsigned long div;
+ unsigned long flags;
+};
+
+#define FFACTOR(_id, cname, pname, m, d, f) \
+ { \
+ .id = _id, \
+ .name = cname, \
+ .parent_name = pname, \
+ .mult = m, \
+ .div = d, \
+ .flags = f, \
+ }
+
+/**
+ * struct samsung_mux_clock: information about mux clock
+ * @id: platform specific id of the clock.
+ * @dev_name: name of the device to which this clock belongs.
+ * @name: name of this mux clock.
+ * @parent_names: array of pointer to parent clock names.
+ * @num_parents: number of parents listed in @parent_names.
+ * @flags: optional flags for basic clock.
+ * @offset: offset of the register for configuring the mux.
+ * @shift: starting bit location of the mux control bit-field in @reg.
+ * @width: width of the mux control bit-field in @reg.
+ * @mux_flags: flags for mux-type clock.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_mux_clock {
+ unsigned int id;
+ const char *dev_name;
+ const char *name;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u8 mux_flags;
+ const char *alias;
+};
+
+#define __MUX(_id, dname, cname, pnames, o, s, w, f, mf, a) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .offset = o, \
+ .shift = s, \
+ .width = w, \
+ .mux_flags = mf, \
+ .alias = a, \
+ }
+
+#define MUX(_id, cname, pnames, o, s, w) \
+ __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, NULL)
+
+#define MUX_A(_id, cname, pnames, o, s, w, a) \
+ __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, a)
+
+#define MUX_F(_id, cname, pnames, o, s, w, f, mf) \
+ __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL)
+
+/**
+ * @id: platform specific id of the clock.
+ * struct samsung_div_clock: information about div clock
+ * @dev_name: name of the device to which this clock belongs.
+ * @name: name of this div clock.
+ * @parent_name: name of the parent clock.
+ * @flags: optional flags for basic clock.
+ * @offset: offset of the register for configuring the div.
+ * @shift: starting bit location of the div control bit-field in @reg.
+ * @div_flags: flags for div-type clock.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_div_clock {
+ unsigned int id;
+ const char *dev_name;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 shift;
+ u8 width;
+ u8 div_flags;
+ const char *alias;
+ struct clk_div_table *table;
+};
+
+#define __DIV(_id, dname, cname, pname, o, s, w, f, df, a, t) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .name = cname, \
+ .parent_name = pname, \
+ .flags = f, \
+ .offset = o, \
+ .shift = s, \
+ .width = w, \
+ .div_flags = df, \
+ .alias = a, \
+ .table = t, \
+ }
+
+#define DIV(_id, cname, pname, o, s, w) \
+ __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL, NULL)
+
+#define DIV_A(_id, cname, pname, o, s, w, a) \
+ __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, a, NULL)
+
+#define DIV_F(_id, cname, pname, o, s, w, f, df) \
+ __DIV(_id, NULL, cname, pname, o, s, w, f, df, NULL, NULL)
+
+#define DIV_T(_id, cname, pname, o, s, w, t) \
+ __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL, t)
+
+/**
+ * struct samsung_gate_clock: information about gate clock
+ * @id: platform specific id of the clock.
+ * @dev_name: name of the device to which this clock belongs.
+ * @name: name of this gate clock.
+ * @parent_name: name of the parent clock.
+ * @flags: optional flags for basic clock.
+ * @offset: offset of the register for configuring the gate.
+ * @bit_idx: bit index of the gate control bit-field in @reg.
+ * @gate_flags: flags for gate-type clock.
+ * @alias: optional clock alias name to be assigned to this clock.
+ */
+struct samsung_gate_clock {
+ unsigned int id;
+ const char *dev_name;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ unsigned long offset;
+ u8 bit_idx;
+ u8 gate_flags;
+ const char *alias;
+};
+
+#define __GATE(_id, dname, cname, pname, o, b, f, gf, a) \
+ { \
+ .id = _id, \
+ .dev_name = dname, \
+ .name = cname, \
+ .parent_name = pname, \
+ .flags = f, \
+ .offset = o, \
+ .bit_idx = b, \
+ .gate_flags = gf, \
+ .alias = a, \
+ }
+
+#define GATE(_id, cname, pname, o, b, f, gf) \
+ __GATE(_id, NULL, cname, pname, o, b, f, gf, NULL)
+
+#define GATE_A(_id, cname, pname, o, b, f, gf, a) \
+ __GATE(_id, NULL, cname, pname, o, b, f, gf, a)
+
+#define GATE_D(_id, dname, cname, pname, o, b, f, gf) \
+ __GATE(_id, dname, cname, pname, o, b, f, gf, NULL)
+
+#define GATE_DA(_id, dname, cname, pname, o, b, f, gf, a) \
+ __GATE(_id, dname, cname, pname, o, b, f, gf, a)
+
+#define PNAME(x) static const char *x[] __initdata
+
+/**
+ * struct samsung_clk_reg_dump: register dump of clock controller registers.
+ * @offset: clock register offset from the controller base address.
+ * @value: the value to be register at offset.
+ */
+struct samsung_clk_reg_dump {
+ u32 offset;
+ u32 value;
+};
+
+extern void __init samsung_clk_init(struct device_node *np, void __iomem *base,
+ unsigned long nr_clks, unsigned long *rdump,
+ unsigned long nr_rdump, unsigned long *soc_rdump,
+ unsigned long nr_soc_rdump);
+extern void __init samsung_clk_of_register_fixed_ext(
+ struct samsung_fixed_rate_clock *fixed_rate_clk,
+ unsigned int nr_fixed_rate_clk,
+ struct of_device_id *clk_matches);
+
+extern void samsung_clk_add_lookup(struct clk *clk, unsigned int id);
+
+extern void samsung_clk_register_alias(struct samsung_clock_alias *list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_fixed_rate(
+ struct samsung_fixed_rate_clock *clk_list, unsigned int nr_clk);
+extern void __init samsung_clk_register_fixed_factor(
+ struct samsung_fixed_factor_clock *list, unsigned int nr_clk);
+extern void __init samsung_clk_register_mux(struct samsung_mux_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_div(struct samsung_div_clock *clk_list,
+ unsigned int nr_clk);
+extern void __init samsung_clk_register_gate(
+ struct samsung_gate_clock *clk_list, unsigned int nr_clk);
+
+extern unsigned long _get_rate(const char *clk_name);
+
+#endif /* __SAMSUNG_CLK_H */
SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0100000.spdif-in");
- clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
+ clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
- clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
+ clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e2800000.gpio");
- clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
+ clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
- clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
+ clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
- clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
+ clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
- clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
+ clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0200000.cam0");
- clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
+ clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0300000.cam1");
- clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
+ clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0400000.cam2");
- clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
+ clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "d0500000.cam3");
--- /dev/null
+#
+# Makefile for sunxi specific clk
+#
+
+obj-y += clk-sunxi.o clk-factors.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <linux/delay.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+struct clk_factors {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct clk_factors_config *config;
+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+ spinlock_t *lock;
+};
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos))
+#define CLRMASK(len, pos) (~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+ (((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u8 n = 1, k = 0, p = 0, m = 0;
+ u32 reg;
+ unsigned long rate;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Get each individual factor if applicable */
+ if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ n = FACTOR_GET(config->nshift, config->nwidth, reg);
+ if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ k = FACTOR_GET(config->kshift, config->kwidth, reg);
+ if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ m = FACTOR_GET(config->mshift, config->mwidth, reg);
+ if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+ /* Calculate the rate */
+ rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+
+ return rate;
+}
+
+static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_factors *factors = to_clk_factors(hw);
+ factors->get_factors((u32 *)&rate, (u32)*parent_rate,
+ NULL, NULL, NULL, NULL);
+
+ return rate;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u8 n, k, m, p;
+ u32 reg;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+ unsigned long flags = 0;
+
+ factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+
+ if (factors->lock)
+ spin_lock_irqsave(factors->lock, flags);
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Set up the new factors - macros do not do anything if width is 0 */
+ reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
+ reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
+ reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
+ reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+
+ /* Apply them now */
+ writel(reg, factors->reg);
+
+ /* delay 500us so pll stabilizes */
+ __delay((rate >> 20) * 500 / 2);
+
+ if (factors->lock)
+ spin_unlock_irqrestore(factors->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+ .recalc_rate = clk_factors_recalc_rate,
+ .round_rate = clk_factors_round_rate,
+ .set_rate = clk_factors_set_rate,
+};
+
+/**
+ * clk_register_factors - register a factors clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust factors
+ * @config: shift and width of factors n, k, m and p
+ * @get_factors: function to calculate the factors for a given frequency
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors)(u32 *rate, u32 parent,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock)
+{
+ struct clk_factors *factors;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the factors */
+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+ if (!factors) {
+ pr_err("%s: could not allocate factors clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clk_factors_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_factors assignments */
+ factors->reg = reg;
+ factors->config = config;
+ factors->lock = lock;
+ factors->hw.init = &init;
+ factors->get_factors = get_factors;
+
+ /* register the clock */
+ clk = clk_register(dev, &factors->hw);
+
+ if (IS_ERR(clk))
+ kfree(factors);
+
+ return clk;
+}
--- /dev/null
+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE (0)
+
+struct clk_factors_config {
+ u8 nshift;
+ u8 nwidth;
+ u8 kshift;
+ u8 kwidth;
+ u8 mshift;
+ u8 mwidth;
+ u8 pshift;
+ u8 pwidth;
+};
+
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors) (u32 *rate, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock);
+#endif
--- /dev/null
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/sunxi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/**
+ * sunxi_osc_clk_setup() - Setup function for gatable oscillator
+ */
+
+#define SUNXI_OSC24M_GATE 0
+
+static void __init sunxi_osc_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_gate(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
+ reg, SUNXI_OSC24M_GATE, 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /* Normalize value to a 6M multiple */
+ div = *freq / 6000000;
+ *freq = 6000000 * div;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ /* m is always zero for pll1 */
+ *m = 0;
+
+ /* k is 1 only on these cases */
+ if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
+ *k = 1;
+ else
+ *k = 0;
+
+ /* p will be 3 for divs under 10 */
+ if (div < 10)
+ *p = 3;
+
+ /* p will be 2 for divs between 10 - 20 and odd divs under 32 */
+ else if (div < 20 || (div < 32 && (div & 1)))
+ *p = 2;
+
+ /* p will be 1 for even divs under 32, divs under 40 and odd pairs
+ * of divs between 40-62 */
+ else if (div < 40 || (div < 64 && (div & 2)))
+ *p = 1;
+
+ /* any other entries have p = 0 */
+ else
+ *p = 0;
+
+ /* calculate a suitable n based on k and p */
+ div <<= *p;
+ div /= (*k + 1);
+ *n = div / 4;
+}
+
+
+
+/**
+ * sunxi_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 calcm, calcp;
+
+ if (parent_rate < *freq)
+ *freq = parent_rate;
+
+ parent_rate = (parent_rate + (*freq - 1)) / *freq;
+
+ /* Invalid rate! */
+ if (parent_rate > 32)
+ return;
+
+ if (parent_rate <= 4)
+ calcp = 0;
+ else if (parent_rate <= 8)
+ calcp = 1;
+ else if (parent_rate <= 16)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = (parent_rate >> calcp) - 1;
+
+ *freq = (parent_rate >> calcp) / (calcm + 1);
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *m = calcm;
+ *p = calcp;
+}
+
+
+
+/**
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+struct factors_data {
+ struct clk_factors_config *table;
+ void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+};
+
+static struct clk_factors_config pll1_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+ .mshift = 0,
+ .mwidth = 2,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static struct clk_factors_config apb1_config = {
+ .mshift = 0,
+ .mwidth = 5,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static const __initconst struct factors_data pll1_data = {
+ .table = &pll1_config,
+ .getter = sunxi_get_pll1_factors,
+};
+
+static const __initconst struct factors_data apb1_data = {
+ .table = &apb1_config,
+ .getter = sunxi_get_apb1_factors,
+};
+
+static void __init sunxi_factors_clk_setup(struct device_node *node,
+ struct factors_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_factors(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
+ reg, data->table, data->getter, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_mux_clk_setup() - Setup function for muxes
+ */
+
+#define SUNXI_MUX_GATE_WIDTH 2
+
+struct mux_data {
+ u8 shift;
+};
+
+static const __initconst struct mux_data cpu_data = {
+ .shift = 16,
+};
+
+static const __initconst struct mux_data apb1_mux_data = {
+ .shift = 24,
+};
+
+static void __init sunxi_mux_clk_setup(struct device_node *node,
+ struct mux_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char **parents = kmalloc(sizeof(char *) * 5, GFP_KERNEL);
+ void *reg;
+ int i = 0;
+
+ reg = of_iomap(node, 0);
+
+ while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+ i++;
+
+ clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg,
+ data->shift, SUNXI_MUX_GATE_WIDTH,
+ 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_divider_clk_setup() - Setup function for simple divider clocks
+ */
+
+#define SUNXI_DIVISOR_WIDTH 2
+
+struct div_data {
+ u8 shift;
+ u8 pow;
+};
+
+static const __initconst struct div_data axi_data = {
+ .shift = 0,
+ .pow = 0,
+};
+
+static const __initconst struct div_data ahb_data = {
+ .shift = 4,
+ .pow = 1,
+};
+
+static const __initconst struct div_data apb0_data = {
+ .shift = 8,
+ .pow = 1,
+};
+
+static void __init sunxi_divider_clk_setup(struct device_node *node,
+ struct div_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *clk_parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ clk_parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
+ reg, data->shift, SUNXI_DIVISOR_WIDTH,
+ data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+ &clk_lock);
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+/* Matches for of_clk_init */
+static const __initconst struct of_device_id clk_match[] = {
+ {.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
+ {.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,},
+ {}
+};
+
+/* Matches for factors clocks */
+static const __initconst struct of_device_id clk_factors_match[] = {
+ {.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,},
+ {.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,},
+ {}
+};
+
+/* Matches for divider clocks */
+static const __initconst struct of_device_id clk_div_match[] = {
+ {.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,},
+ {.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,},
+ {.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,},
+ {}
+};
+
+/* Matches for mux clocks */
+static const __initconst struct of_device_id clk_mux_match[] = {
+ {.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,},
+ {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,},
+ {}
+};
+
+static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
+ void *function)
+{
+ struct device_node *np;
+ const struct div_data *data;
+ const struct of_device_id *match;
+ void (*setup_function)(struct device_node *, const void *) = function;
+
+ for_each_matching_node(np, clk_match) {
+ match = of_match_node(clk_match, np);
+ data = match->data;
+ setup_function(np, data);
+ }
+}
+
+void __init sunxi_init_clocks(void)
+{
+ /* Register all the simple sunxi clocks on DT */
+ of_clk_init(clk_match);
+
+ /* Register factor clocks */
+ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
+
+ /* Register divider clocks */
+ of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+
+ /* Register mux clocks */
+ of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
+}
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
#define write_rst_clr(val, gate) \
writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg))
-#define periph_clk_to_bit(periph) (1 << (gate->clk_num % 32))
+#define periph_clk_to_bit(gate) (1 << (gate->clk_num % 32))
+
+#define LVL2_CLK_GATE_OVRE 0x554
/* Peripheral gate clock ops */
static int clk_periph_is_enabled(struct clk_hw *hw)
}
}
+ if (gate->flags & TEGRA_PERIPH_WAR_1005168) {
+ writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE);
+ writel_relaxed(BIT(22), gate->clk_base + LVL2_CLK_GATE_OVRE);
+ udelay(1);
+ writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE);
+ }
+
spin_unlock_irqrestore(&periph_ref_lock, flags);
return 0;
#include <linux/clk.h>
#include <linux/clk-provider.h>
+#include <linux/export.h>
#include <linux/slab.h>
#include <linux/err.h>
tegra_periph_reset(gate, 0);
}
+EXPORT_SYMBOL(tegra_periph_reset_deassert);
void tegra_periph_reset_assert(struct clk *c)
{
tegra_periph_reset(gate, 1);
}
+EXPORT_SYMBOL(tegra_periph_reset_assert);
const struct clk_ops tegra_clk_periph_ops = {
.get_parent = clk_periph_get_parent,
static struct clk *_tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph,
- void __iomem *clk_base, u32 offset, bool div)
+ void __iomem *clk_base, u32 offset, bool div,
+ unsigned long flags)
{
struct clk *clk;
struct clk_init_data init;
init.name = name;
init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops;
- init.flags = div ? 0 : CLK_SET_RATE_PARENT;
+ init.flags = flags;
init.parent_names = parent_names;
init.num_parents = num_parents;
struct clk *tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
- u32 offset)
+ u32 offset, unsigned long flags)
{
return _tegra_clk_register_periph(name, parent_names, num_parents,
- periph, clk_base, offset, true);
+ periph, clk_base, offset, true, flags);
}
struct clk *tegra_clk_register_periph_nodiv(const char *name,
u32 offset)
{
return _tegra_clk_register_periph(name, parent_names, num_parents,
- periph, clk_base, offset, false);
+ periph, clk_base, offset, false, CLK_SET_RATE_PARENT);
}
/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#define PLLE_SS_CTRL 0x68
#define PLLE_SS_DISABLE (7 << 10)
+#define PLLE_AUX_PLLP_SEL BIT(2)
+#define PLLE_AUX_ENABLE_SWCTL BIT(4)
+#define PLLE_AUX_SEQ_ENABLE BIT(24)
+#define PLLE_AUX_PLLRE_SEL BIT(28)
+
+#define PLLE_MISC_PLLE_PTS BIT(8)
+#define PLLE_MISC_IDDQ_SW_VALUE BIT(13)
+#define PLLE_MISC_IDDQ_SW_CTRL BIT(14)
+#define PLLE_MISC_VREG_BG_CTRL_SHIFT 4
+#define PLLE_MISC_VREG_BG_CTRL_MASK (3 << PLLE_MISC_VREG_BG_CTRL_SHIFT)
+#define PLLE_MISC_VREG_CTRL_SHIFT 2
+#define PLLE_MISC_VREG_CTRL_MASK (2 << PLLE_MISC_VREG_CTRL_SHIFT)
+
+#define PLLCX_MISC_STROBE BIT(31)
+#define PLLCX_MISC_RESET BIT(30)
+#define PLLCX_MISC_SDM_DIV_SHIFT 28
+#define PLLCX_MISC_SDM_DIV_MASK (0x3 << PLLCX_MISC_SDM_DIV_SHIFT)
+#define PLLCX_MISC_FILT_DIV_SHIFT 26
+#define PLLCX_MISC_FILT_DIV_MASK (0x3 << PLLCX_MISC_FILT_DIV_SHIFT)
+#define PLLCX_MISC_ALPHA_SHIFT 18
+#define PLLCX_MISC_DIV_LOW_RANGE \
+ ((0x1 << PLLCX_MISC_SDM_DIV_SHIFT) | \
+ (0x1 << PLLCX_MISC_FILT_DIV_SHIFT))
+#define PLLCX_MISC_DIV_HIGH_RANGE \
+ ((0x2 << PLLCX_MISC_SDM_DIV_SHIFT) | \
+ (0x2 << PLLCX_MISC_FILT_DIV_SHIFT))
+#define PLLCX_MISC_COEF_LOW_RANGE \
+ ((0x14 << PLLCX_MISC_KA_SHIFT) | (0x38 << PLLCX_MISC_KB_SHIFT))
+#define PLLCX_MISC_KA_SHIFT 2
+#define PLLCX_MISC_KB_SHIFT 9
+#define PLLCX_MISC_DEFAULT (PLLCX_MISC_COEF_LOW_RANGE | \
+ (0x19 << PLLCX_MISC_ALPHA_SHIFT) | \
+ PLLCX_MISC_DIV_LOW_RANGE | \
+ PLLCX_MISC_RESET)
+#define PLLCX_MISC1_DEFAULT 0x000d2308
+#define PLLCX_MISC2_DEFAULT 0x30211200
+#define PLLCX_MISC3_DEFAULT 0x200
+
+#define PMC_PLLM_WB0_OVERRIDE 0x1dc
+#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
+#define PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK BIT(27)
+
#define PMC_SATA_PWRGT 0x1ac
#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5)
#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4)
#define divn_max(p) (divn_mask(p))
#define divp_max(p) (1 << (divp_mask(p)))
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+/* PLLXC has 4-bit PDIV, but entry 15 is not allowed in h/w */
+#define PLLXC_PDIV_MAX 14
+
+/* non-monotonic mapping below is not a typo */
+static u8 pllxc_p[PLLXC_PDIV_MAX + 1] = {
+ /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */
+ /* p: */ 1, 2, 3, 4, 5, 6, 8, 10, 12, 16, 12, 16, 20, 24, 32
+};
+
+#define PLLCX_PDIV_MAX 7
+static u8 pllcx_p[PLLCX_PDIV_MAX + 1] = {
+ /* PDIV: 0, 1, 2, 3, 4, 5, 6, 7 */
+ /* p: */ 1, 2, 3, 4, 6, 8, 12, 16
+};
+#endif
+
static void clk_pll_enable_lock(struct tegra_clk_pll *pll)
{
u32 val;
if (!(pll->flags & TEGRA_PLL_USE_LOCK))
return;
+ if (!(pll->flags & TEGRA_PLL_HAS_LOCK_ENABLE))
+ return;
+
val = pll_readl_misc(pll);
val |= BIT(pll->params->lock_enable_bit_idx);
pll_writel_misc(val, pll);
}
-static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll,
- void __iomem *lock_addr, u32 lock_bit_idx)
+static int clk_pll_wait_for_lock(struct tegra_clk_pll *pll)
{
int i;
- u32 val;
+ u32 val, lock_mask;
+ void __iomem *lock_addr;
if (!(pll->flags & TEGRA_PLL_USE_LOCK)) {
udelay(pll->params->lock_delay);
return 0;
}
+ lock_addr = pll->clk_base;
+ if (pll->flags & TEGRA_PLL_LOCK_MISC)
+ lock_addr += pll->params->misc_reg;
+ else
+ lock_addr += pll->params->base_reg;
+
+ lock_mask = pll->params->lock_mask;
+
for (i = 0; i < pll->params->lock_delay; i++) {
val = readl_relaxed(lock_addr);
- if (val & BIT(lock_bit_idx)) {
+ if ((val & lock_mask) == lock_mask) {
udelay(PLL_POST_LOCK_DELAY);
return 0;
}
return val & PLL_BASE_ENABLE ? 1 : 0;
}
-static int _clk_pll_enable(struct clk_hw *hw)
+static void _clk_pll_enable(struct clk_hw *hw)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
u32 val;
clk_pll_enable_lock(pll);
val = pll_readl_base(pll);
- val &= ~PLL_BASE_BYPASS;
+ if (pll->flags & TEGRA_PLL_BYPASS)
+ val &= ~PLL_BASE_BYPASS;
val |= PLL_BASE_ENABLE;
pll_writel_base(val, pll);
val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
}
-
- clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->base_reg,
- pll->params->lock_bit_idx);
-
- return 0;
}
static void _clk_pll_disable(struct clk_hw *hw)
u32 val;
val = pll_readl_base(pll);
- val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ if (pll->flags & TEGRA_PLL_BYPASS)
+ val &= ~PLL_BASE_BYPASS;
+ val &= ~PLL_BASE_ENABLE;
pll_writel_base(val, pll);
if (pll->flags & TEGRA_PLLM) {
if (pll->lock)
spin_lock_irqsave(pll->lock, flags);
- ret = _clk_pll_enable(hw);
+ _clk_pll_enable(hw);
+
+ ret = clk_pll_wait_for_lock(pll);
if (pll->lock)
spin_unlock_irqrestore(pll->lock, flags);
if (sel->input_rate == 0)
return -EINVAL;
- BUG_ON(sel->p < 1);
-
cfg->input_rate = sel->input_rate;
cfg->output_rate = sel->output_rate;
cfg->m = sel->m;
unsigned long rate, unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct pdiv_map *p_tohw = pll->params->pdiv_tohw;
unsigned long cfreq;
u32 p_div = 0;
cfg->output_rate <<= 1)
p_div++;
- cfg->p = 1 << p_div;
cfg->m = parent_rate / cfreq;
cfg->n = cfg->output_rate / cfreq;
cfg->cpcon = OUT_OF_TABLE_CPCON;
if (cfg->m > divm_max(pll) || cfg->n > divn_max(pll) ||
- cfg->p > divp_max(pll) || cfg->output_rate > pll->params->vco_max) {
+ (1 << p_div) > divp_max(pll)
+ || cfg->output_rate > pll->params->vco_max) {
pr_err("%s: Failed to set %s rate %lu\n",
__func__, __clk_get_name(hw->clk), rate);
return -EINVAL;
}
+ if (p_tohw) {
+ p_div = 1 << p_div;
+ while (p_tohw->pdiv) {
+ if (p_div <= p_tohw->pdiv) {
+ cfg->p = p_tohw->hw_val;
+ break;
+ }
+ p_tohw++;
+ }
+ if (!p_tohw->pdiv)
+ return -EINVAL;
+ } else
+ cfg->p = p_div;
+
return 0;
}
-static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
- unsigned long rate)
+static void _update_pll_mnp(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg)
{
- struct tegra_clk_pll *pll = to_clk_pll(hw);
- unsigned long flags = 0;
- u32 divp, val, old_base;
- int state;
-
- divp = __ffs(cfg->p);
-
- if (pll->flags & TEGRA_PLLU)
- divp ^= 1;
+ u32 val;
- if (pll->lock)
- spin_lock_irqsave(pll->lock, flags);
+ val = pll_readl_base(pll);
- old_base = val = pll_readl_base(pll);
val &= ~((divm_mask(pll) << pll->divm_shift) |
(divn_mask(pll) << pll->divn_shift) |
(divp_mask(pll) << pll->divp_shift));
val |= ((cfg->m << pll->divm_shift) |
(cfg->n << pll->divn_shift) |
- (divp << pll->divp_shift));
- if (val == old_base) {
- if (pll->lock)
- spin_unlock_irqrestore(pll->lock, flags);
- return 0;
+ (cfg->p << pll->divp_shift));
+
+ pll_writel_base(val, pll);
+}
+
+static void _get_pll_mnp(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg)
+{
+ u32 val;
+
+ val = pll_readl_base(pll);
+
+ cfg->m = (val >> pll->divm_shift) & (divm_mask(pll));
+ cfg->n = (val >> pll->divn_shift) & (divn_mask(pll));
+ cfg->p = (val >> pll->divp_shift) & (divp_mask(pll));
+}
+
+static void _update_pll_cpcon(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate)
+{
+ u32 val;
+
+ val = pll_readl_misc(pll);
+
+ val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT);
+ val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT;
+
+ if (pll->flags & TEGRA_PLL_SET_LFCON) {
+ val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT);
+ if (cfg->n >= PLLDU_LFCON_SET_DIVN)
+ val |= 1 << PLL_MISC_LFCON_SHIFT;
+ } else if (pll->flags & TEGRA_PLL_SET_DCCON) {
+ val &= ~(1 << PLL_MISC_DCCON_SHIFT);
+ if (rate >= (pll->params->vco_max >> 1))
+ val |= 1 << PLL_MISC_DCCON_SHIFT;
}
+ pll_writel_misc(val, pll);
+}
+
+static int _program_pll(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ int state, ret = 0;
+
state = clk_pll_is_enabled(hw);
- if (state) {
+ if (state)
_clk_pll_disable(hw);
- val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
- }
- pll_writel_base(val, pll);
- if (pll->flags & TEGRA_PLL_HAS_CPCON) {
- val = pll_readl_misc(pll);
- val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT);
- val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT;
- if (pll->flags & TEGRA_PLL_SET_LFCON) {
- val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT);
- if (cfg->n >= PLLDU_LFCON_SET_DIVN)
- val |= 0x1 << PLL_MISC_LFCON_SHIFT;
- } else if (pll->flags & TEGRA_PLL_SET_DCCON) {
- val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
- if (rate >= (pll->params->vco_max >> 1))
- val |= 0x1 << PLL_MISC_DCCON_SHIFT;
- }
- pll_writel_misc(val, pll);
- }
+ _update_pll_mnp(pll, cfg);
- if (pll->lock)
- spin_unlock_irqrestore(pll->lock, flags);
+ if (pll->flags & TEGRA_PLL_HAS_CPCON)
+ _update_pll_cpcon(pll, cfg, rate);
- if (state)
- clk_pll_enable(hw);
+ if (state) {
+ _clk_pll_enable(hw);
+ ret = clk_pll_wait_for_lock(pll);
+ }
- return 0;
+ return ret;
}
static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
- struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll_freq_table cfg, old_cfg;
+ unsigned long flags = 0;
+ int ret = 0;
if (pll->flags & TEGRA_PLL_FIXED) {
if (rate != pll->fixed_rate) {
_calc_rate(hw, &cfg, rate, parent_rate))
return -EINVAL;
- return _program_pll(hw, &cfg, rate);
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _get_pll_mnp(pll, &old_cfg);
+
+ if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_cfg.p != cfg.p)
+ ret = _program_pll(hw, &cfg, rate);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
}
static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
output_rate *= cfg.n;
- do_div(output_rate, cfg.m * cfg.p);
+ do_div(output_rate, cfg.m * (1 << cfg.p));
return output_rate;
}
unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
- u32 val = pll_readl_base(pll);
- u32 divn = 0, divm = 0, divp = 0;
+ struct tegra_clk_pll_freq_table cfg;
+ struct pdiv_map *p_tohw = pll->params->pdiv_tohw;
+ u32 val;
u64 rate = parent_rate;
+ int pdiv;
+
+ val = pll_readl_base(pll);
- if (val & PLL_BASE_BYPASS)
+ if ((pll->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS))
return parent_rate;
if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) {
return pll->fixed_rate;
}
- divp = (val >> pll->divp_shift) & (divp_mask(pll));
- if (pll->flags & TEGRA_PLLU)
- divp ^= 1;
+ _get_pll_mnp(pll, &cfg);
- divn = (val >> pll->divn_shift) & (divn_mask(pll));
- divm = (val >> pll->divm_shift) & (divm_mask(pll));
- divm *= (1 << divp);
+ if (p_tohw) {
+ while (p_tohw->pdiv) {
+ if (cfg.p == p_tohw->hw_val) {
+ pdiv = p_tohw->pdiv;
+ break;
+ }
+ p_tohw++;
+ }
+
+ if (!p_tohw->pdiv) {
+ WARN_ON(1);
+ pdiv = 1;
+ }
+ } else
+ pdiv = 1 << cfg.p;
+
+ cfg.m *= pdiv;
+
+ rate *= cfg.n;
+ do_div(rate, cfg.m);
- rate *= divn;
- do_div(rate, divm);
return rate;
}
val |= (PLL_BASE_BYPASS | PLL_BASE_ENABLE);
pll_writel_base(val, pll);
- clk_pll_wait_for_lock(pll, pll->clk_base + pll->params->misc_reg,
- pll->params->lock_bit_idx);
+ clk_pll_wait_for_lock(pll);
+
return 0;
}
.enable = clk_plle_enable,
};
-static struct clk *_tegra_clk_register_pll(const char *name,
- const char *parent_name, void __iomem *clk_base,
- void __iomem *pmc, unsigned long flags,
- unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock,
- const struct clk_ops *ops)
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+
+static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
+ unsigned long parent_rate)
{
- struct tegra_clk_pll *pll;
- struct clk *clk;
- struct clk_init_data init;
+ if (parent_rate > pll_params->cf_max)
+ return 2;
+ else
+ return 1;
+}
- pll = kzalloc(sizeof(*pll), GFP_KERNEL);
- if (!pll)
- return ERR_PTR(-ENOMEM);
+static int clk_pll_iddq_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
- init.name = name;
- init.ops = ops;
- init.flags = flags;
- init.parent_names = (parent_name ? &parent_name : NULL);
- init.num_parents = (parent_name ? 1 : 0);
+ u32 val;
+ int ret;
- pll->clk_base = clk_base;
- pll->pmc = pmc;
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
- pll->freq_table = freq_table;
- pll->params = pll_params;
- pll->fixed_rate = fixed_rate;
- pll->flags = pll_flags;
- pll->lock = lock;
+ val = pll_readl(pll->params->iddq_reg, pll);
+ val &= ~BIT(pll->params->iddq_bit_idx);
+ pll_writel(val, pll->params->iddq_reg, pll);
+ udelay(2);
- pll->divp_shift = PLL_BASE_DIVP_SHIFT;
- pll->divp_width = PLL_BASE_DIVP_WIDTH;
- pll->divn_shift = PLL_BASE_DIVN_SHIFT;
- pll->divn_width = PLL_BASE_DIVN_WIDTH;
- pll->divm_shift = PLL_BASE_DIVM_SHIFT;
- pll->divm_width = PLL_BASE_DIVM_WIDTH;
+ _clk_pll_enable(hw);
- /* Data in .init is copied by clk_register(), so stack variable OK */
- pll->hw.init = &init;
+ ret = clk_pll_wait_for_lock(pll);
- clk = clk_register(NULL, &pll->hw);
- if (IS_ERR(clk))
- kfree(pll);
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
- return clk;
+ return 0;
}
-struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
- void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+static void clk_pll_iddq_disable(struct clk_hw *hw)
{
- return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
- flags, fixed_rate, pll_params, pll_flags, freq_table,
- lock, &tegra_clk_pll_ops);
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_disable(hw);
+
+ val = pll_readl(pll->params->iddq_reg, pll);
+ val |= BIT(pll->params->iddq_bit_idx);
+ pll_writel(val, pll->params->iddq_reg, pll);
+ udelay(2);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
}
-struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
- void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+static int _calc_dynamic_ramp_rate(struct clk_hw *hw,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned int p;
+
+ if (!rate)
+ return -EINVAL;
+
+ p = DIV_ROUND_UP(pll->params->vco_min, rate);
+ cfg->m = _pll_fixed_mdiv(pll->params, parent_rate);
+ cfg->p = p;
+ cfg->output_rate = rate * cfg->p;
+ cfg->n = cfg->output_rate * cfg->m / parent_rate;
+
+ if (cfg->n > divn_max(pll) || cfg->output_rate > pll->params->vco_max)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int _pll_ramp_calc_pll(struct clk_hw *hw,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ int err = 0;
+
+ err = _get_table_rate(hw, cfg, rate, parent_rate);
+ if (err < 0)
+ err = _calc_dynamic_ramp_rate(hw, cfg, rate, parent_rate);
+ else if (cfg->m != _pll_fixed_mdiv(pll->params, parent_rate)) {
+ WARN_ON(1);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (!cfg->p || (cfg->p > pll->params->max_p))
+ err = -EINVAL;
+
+out:
+ return err;
+}
+
+static int clk_pllxc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table cfg, old_cfg;
+ unsigned long flags = 0;
+ int ret = 0;
+ u8 old_p;
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate);
+ if (ret < 0)
+ return ret;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _get_pll_mnp(pll, &old_cfg);
+
+ old_p = pllxc_p[old_cfg.p];
+ if (old_cfg.m != cfg.m || old_cfg.n != cfg.n || old_p != cfg.p) {
+ cfg.p -= 1;
+ ret = _program_pll(hw, &cfg, rate);
+ }
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static long clk_pll_ramp_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ int ret = 0;
+ u64 output_rate = *prate;
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, *prate);
+ if (ret < 0)
+ return ret;
+
+ output_rate *= cfg.n;
+ do_div(output_rate, cfg.m * cfg.p);
+
+ return output_rate;
+}
+
+static int clk_pllm_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int state, ret = 0;
+ u32 val;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ state = clk_pll_is_enabled(hw);
+ if (state) {
+ if (rate != clk_get_rate(hw->clk)) {
+ pr_err("%s: Cannot change active PLLM\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+ goto out;
+ }
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate);
+ if (ret < 0)
+ goto out;
+
+ cfg.p -= 1;
+
+ val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE);
+ if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE) {
+ val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE_2);
+ val = cfg.p ? (val | PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK) :
+ (val & ~PMC_PLLM_WB0_OVERRIDE_2_DIVP_MASK);
+ writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE_2);
+
+ val = readl_relaxed(pll->pmc + PMC_PLLM_WB0_OVERRIDE);
+ val &= ~(divn_mask(pll) | divm_mask(pll));
+ val |= (cfg.m << pll->divm_shift) | (cfg.n << pll->divn_shift);
+ writel_relaxed(val, pll->pmc + PMC_PLLM_WB0_OVERRIDE);
+ } else
+ _update_pll_mnp(pll, &cfg);
+
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void _pllcx_strobe(struct tegra_clk_pll *pll)
+{
+ u32 val;
+
+ val = pll_readl_misc(pll);
+ val |= PLLCX_MISC_STROBE;
+ pll_writel_misc(val, pll);
+ udelay(2);
+
+ val &= ~PLLCX_MISC_STROBE;
+ pll_writel_misc(val, pll);
+}
+
+static int clk_pllc_enable(struct clk_hw *hw)
{
- return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
- flags, fixed_rate, pll_params, pll_flags, freq_table,
- lock, &tegra_clk_plle_ops);
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+ int ret = 0;
+ unsigned long flags = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_enable(hw);
+ udelay(2);
+
+ val = pll_readl_misc(pll);
+ val &= ~PLLCX_MISC_RESET;
+ pll_writel_misc(val, pll);
+ udelay(2);
+
+ _pllcx_strobe(pll);
+
+ ret = clk_pll_wait_for_lock(pll);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void _clk_pllc_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u32 val;
+
+ _clk_pll_disable(hw);
+
+ val = pll_readl_misc(pll);
+ val |= PLLCX_MISC_RESET;
+ pll_writel_misc(val, pll);
+ udelay(2);
+}
+
+static void clk_pllc_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pllc_disable(hw);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+}
+
+static int _pllcx_update_dynamic_coef(struct tegra_clk_pll *pll,
+ unsigned long input_rate, u32 n)
+{
+ u32 val, n_threshold;
+
+ switch (input_rate) {
+ case 12000000:
+ n_threshold = 70;
+ break;
+ case 13000000:
+ case 26000000:
+ n_threshold = 71;
+ break;
+ case 16800000:
+ n_threshold = 55;
+ break;
+ case 19200000:
+ n_threshold = 48;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, input_rate);
+ return -EINVAL;
+ }
+
+ val = pll_readl_misc(pll);
+ val &= ~(PLLCX_MISC_SDM_DIV_MASK | PLLCX_MISC_FILT_DIV_MASK);
+ val |= n <= n_threshold ?
+ PLLCX_MISC_DIV_LOW_RANGE : PLLCX_MISC_DIV_HIGH_RANGE;
+ pll_writel_misc(val, pll);
+
+ return 0;
+}
+
+static int clk_pllc_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int state, ret = 0;
+ u32 val;
+ u16 old_m, old_n;
+ u8 old_p;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ ret = _pll_ramp_calc_pll(hw, &cfg, rate, parent_rate);
+ if (ret < 0)
+ goto out;
+
+ val = pll_readl_base(pll);
+ old_m = (val >> pll->divm_shift) & (divm_mask(pll));
+ old_n = (val >> pll->divn_shift) & (divn_mask(pll));
+ old_p = pllcx_p[(val >> pll->divp_shift) & (divp_mask(pll))];
+
+ if (cfg.m != old_m) {
+ WARN_ON(1);
+ goto out;
+ }
+
+ if (old_n == cfg.n && old_p == cfg.p)
+ goto out;
+
+ cfg.p -= 1;
+
+ state = clk_pll_is_enabled(hw);
+ if (state)
+ _clk_pllc_disable(hw);
+
+ ret = _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n);
+ if (ret < 0)
+ goto out;
+
+ _update_pll_mnp(pll, &cfg);
+
+ if (state)
+ ret = clk_pllc_enable(hw);
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static long _pllre_calc_rate(struct tegra_clk_pll *pll,
+ struct tegra_clk_pll_freq_table *cfg,
+ unsigned long rate, unsigned long parent_rate)
+{
+ u16 m, n;
+ u64 output_rate = parent_rate;
+
+ m = _pll_fixed_mdiv(pll->params, parent_rate);
+ n = rate * m / parent_rate;
+
+ output_rate *= n;
+ do_div(output_rate, m);
+
+ if (cfg) {
+ cfg->m = m;
+ cfg->n = n;
+ }
+
+ return output_rate;
+}
+static int clk_pllre_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg, old_cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ int state, ret = 0;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _pllre_calc_rate(pll, &cfg, rate, parent_rate);
+ _get_pll_mnp(pll, &old_cfg);
+ cfg.p = old_cfg.p;
+
+ if (cfg.m != old_cfg.m || cfg.n != old_cfg.n) {
+ state = clk_pll_is_enabled(hw);
+ if (state)
+ _clk_pll_disable(hw);
+
+ _update_pll_mnp(pll, &cfg);
+
+ if (state) {
+ _clk_pll_enable(hw);
+ ret = clk_pll_wait_for_lock(pll);
+ }
+ }
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static unsigned long clk_pllre_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct tegra_clk_pll_freq_table cfg;
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ u64 rate = parent_rate;
+
+ _get_pll_mnp(pll, &cfg);
+
+ rate *= cfg.n;
+ do_div(rate, cfg.m);
+
+ return rate;
+}
+
+static long clk_pllre_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+
+ return _pllre_calc_rate(pll, NULL, rate, *prate);
+}
+
+static int clk_plle_tegra114_enable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct tegra_clk_pll_freq_table sel;
+ u32 val;
+ int ret;
+ unsigned long flags = 0;
+ unsigned long input_rate = clk_get_rate(clk_get_parent(hw->clk));
+
+ if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate))
+ return -EINVAL;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ val = pll_readl_base(pll);
+ val &= ~BIT(29); /* Disable lock override */
+ pll_writel_base(val, pll);
+
+ val = pll_readl(pll->params->aux_reg, pll);
+ val |= PLLE_AUX_ENABLE_SWCTL;
+ val &= ~PLLE_AUX_SEQ_ENABLE;
+ pll_writel(val, pll->params->aux_reg, pll);
+ udelay(1);
+
+ val = pll_readl_misc(pll);
+ val |= PLLE_MISC_LOCK_ENABLE;
+ val |= PLLE_MISC_IDDQ_SW_CTRL;
+ val &= ~PLLE_MISC_IDDQ_SW_VALUE;
+ val |= PLLE_MISC_PLLE_PTS;
+ val |= PLLE_MISC_VREG_BG_CTRL_MASK | PLLE_MISC_VREG_CTRL_MASK;
+ pll_writel_misc(val, pll);
+ udelay(5);
+
+ val = pll_readl(PLLE_SS_CTRL, pll);
+ val |= PLLE_SS_DISABLE;
+ pll_writel(val, PLLE_SS_CTRL, pll);
+
+ val = pll_readl_base(pll);
+ val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll));
+ val &= ~(PLLE_BASE_DIVCML_WIDTH << PLLE_BASE_DIVCML_SHIFT);
+ val |= sel.m << pll->divm_shift;
+ val |= sel.n << pll->divn_shift;
+ val |= sel.cpcon << PLLE_BASE_DIVCML_SHIFT;
+ pll_writel_base(val, pll);
+ udelay(1);
+
+ _clk_pll_enable(hw);
+ ret = clk_pll_wait_for_lock(pll);
+
+ if (ret < 0)
+ goto out;
+
+ /* TODO: enable hw control of xusb brick pll */
+
+out:
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+
+ return ret;
+}
+
+static void clk_plle_tegra114_disable(struct clk_hw *hw)
+{
+ struct tegra_clk_pll *pll = to_clk_pll(hw);
+ unsigned long flags = 0;
+ u32 val;
+
+ if (pll->lock)
+ spin_lock_irqsave(pll->lock, flags);
+
+ _clk_pll_disable(hw);
+
+ val = pll_readl_misc(pll);
+ val |= PLLE_MISC_IDDQ_SW_CTRL | PLLE_MISC_IDDQ_SW_VALUE;
+ pll_writel_misc(val, pll);
+ udelay(1);
+
+ if (pll->lock)
+ spin_unlock_irqrestore(pll->lock, flags);
+}
+#endif
+
+static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base,
+ void __iomem *pmc, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->clk_base = clk_base;
+ pll->pmc = pmc;
+
+ pll->freq_table = freq_table;
+ pll->params = pll_params;
+ pll->fixed_rate = fixed_rate;
+ pll->flags = pll_flags;
+ pll->lock = lock;
+
+ pll->divp_shift = PLL_BASE_DIVP_SHIFT;
+ pll->divp_width = PLL_BASE_DIVP_WIDTH;
+ pll->divn_shift = PLL_BASE_DIVN_SHIFT;
+ pll->divn_width = PLL_BASE_DIVN_WIDTH;
+ pll->divm_shift = PLL_BASE_DIVM_SHIFT;
+ pll->divm_width = PLL_BASE_DIVM_WIDTH;
+
+ return pll;
+}
+
+static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll,
+ const char *name, const char *parent_name, unsigned long flags,
+ const struct clk_ops *ops)
+{
+ struct clk_init_data init;
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* Data in .init is copied by clk_register(), so stack variable OK */
+ pll->hw.init = &init;
+
+ return clk_register(NULL, &pll->hw);
+}
+
+struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_flags |= TEGRA_PLL_BYPASS;
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pll_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS;
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_plle_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+const struct clk_ops tegra_clk_pllxc_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllxc_set_rate,
+};
+
+const struct clk_ops tegra_clk_pllm_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllm_set_rate,
+};
+
+const struct clk_ops tegra_clk_pllc_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pllc_enable,
+ .disable = clk_pllc_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllc_set_rate,
+};
+
+const struct clk_ops tegra_clk_pllre_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pllre_recalc_rate,
+ .round_rate = clk_pllre_round_rate,
+ .set_rate = clk_pllre_set_rate,
+};
+
+const struct clk_ops tegra_clk_plle_tegra114_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_plle_tegra114_enable,
+ .disable = clk_plle_tegra114_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+};
+
+
+struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ if (!pll_params->pdiv_tohw)
+ return ERR_PTR(-EINVAL);
+
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllxc_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock, unsigned long parent_rate)
+{
+ u32 val;
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ /* program minimum rate by default */
+
+ val = pll_readl_base(pll);
+ if (val & PLL_BASE_ENABLE)
+ WARN_ON(val & pll_params->iddq_bit_idx);
+ else {
+ int m;
+
+ m = _pll_fixed_mdiv(pll_params, parent_rate);
+ val = m << PLL_BASE_DIVM_SHIFT;
+ val |= (pll_params->vco_min / parent_rate)
+ << PLL_BASE_DIVN_SHIFT;
+ pll_writel_base(val, pll);
+ }
+
+ /* disable lock override */
+
+ val = pll_readl_misc(pll);
+ val &= ~BIT(29);
+ pll_writel_misc(val, pll);
+
+ pll_flags |= TEGRA_PLL_LOCK_MISC;
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllre_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+
+ if (!pll_params->pdiv_tohw)
+ return ERR_PTR(-EINVAL);
+
+ pll_flags |= TEGRA_PLL_BYPASS;
+ pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllm_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct clk *parent, *clk;
+ struct pdiv_map *p_tohw = pll_params->pdiv_tohw;
+ struct tegra_clk_pll *pll;
+ struct tegra_clk_pll_freq_table cfg;
+ unsigned long parent_rate;
+
+ if (!p_tohw)
+ return ERR_PTR(-EINVAL);
+
+ parent = __clk_lookup(parent_name);
+ if (IS_ERR(parent)) {
+ WARN(1, "parent clk %s of %s must be registered first\n",
+ name, parent_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pll_flags |= TEGRA_PLL_BYPASS;
+ pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
+ freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ parent_rate = __clk_get_rate(parent);
+
+ /*
+ * Most of PLLC register fields are shadowed, and can not be read
+ * directly from PLL h/w. Hence, actual PLLC boot state is unknown.
+ * Initialize PLL to default state: disabled, reset; shadow registers
+ * loaded with default parameters; dividers are preset for half of
+ * minimum VCO rate (the latter assured that shadowed divider settings
+ * are within supported range).
+ */
+
+ cfg.m = _pll_fixed_mdiv(pll_params, parent_rate);
+ cfg.n = cfg.m * pll_params->vco_min / parent_rate;
+
+ while (p_tohw->pdiv) {
+ if (p_tohw->pdiv == 2) {
+ cfg.p = p_tohw->hw_val;
+ break;
+ }
+ p_tohw++;
+ }
+
+ if (!p_tohw->pdiv) {
+ WARN_ON(1);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pll_writel_base(0, pll);
+ _update_pll_mnp(pll, &cfg);
+
+ pll_writel_misc(PLLCX_MISC_DEFAULT, pll);
+ pll_writel(PLLCX_MISC1_DEFAULT, pll_params->ext_misc_reg[0], pll);
+ pll_writel(PLLCX_MISC2_DEFAULT, pll_params->ext_misc_reg[1], pll);
+ pll_writel(PLLCX_MISC3_DEFAULT, pll_params->ext_misc_reg[2], pll);
+
+ _pllcx_update_dynamic_coef(pll, parent_rate, cfg.n);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllc_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+struct clk *tegra_clk_register_plle_tegra114(const char *name,
+ const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk;
+ u32 val, val_aux;
+
+ pll = _tegra_init_pll(clk_base, NULL, fixed_rate, pll_params,
+ TEGRA_PLL_HAS_LOCK_ENABLE, freq_table, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ /* ensure parent is set to pll_re_vco */
+
+ val = pll_readl_base(pll);
+ val_aux = pll_readl(pll_params->aux_reg, pll);
+
+ if (val & PLL_BASE_ENABLE) {
+ if (!(val_aux & PLLE_AUX_PLLRE_SEL))
+ WARN(1, "pll_e enabled with unsupported parent %s\n",
+ (val & PLLE_AUX_PLLP_SEL) ? "pllp_out0" : "pll_ref");
+ } else {
+ val_aux |= PLLE_AUX_PLLRE_SEL;
+ pll_writel(val, pll_params->aux_reg, pll);
+ }
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_plle_tegra114_ops);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
}
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+
+#define RST_DEVICES_L 0x004
+#define RST_DEVICES_H 0x008
+#define RST_DEVICES_U 0x00C
+#define RST_DEVICES_V 0x358
+#define RST_DEVICES_W 0x35C
+#define RST_DEVICES_X 0x28C
+#define RST_DEVICES_SET_L 0x300
+#define RST_DEVICES_CLR_L 0x304
+#define RST_DEVICES_SET_H 0x308
+#define RST_DEVICES_CLR_H 0x30c
+#define RST_DEVICES_SET_U 0x310
+#define RST_DEVICES_CLR_U 0x314
+#define RST_DEVICES_SET_V 0x430
+#define RST_DEVICES_CLR_V 0x434
+#define RST_DEVICES_SET_W 0x438
+#define RST_DEVICES_CLR_W 0x43c
+#define RST_DEVICES_NUM 5
+
+#define CLK_OUT_ENB_L 0x010
+#define CLK_OUT_ENB_H 0x014
+#define CLK_OUT_ENB_U 0x018
+#define CLK_OUT_ENB_V 0x360
+#define CLK_OUT_ENB_W 0x364
+#define CLK_OUT_ENB_X 0x280
+#define CLK_OUT_ENB_SET_L 0x320
+#define CLK_OUT_ENB_CLR_L 0x324
+#define CLK_OUT_ENB_SET_H 0x328
+#define CLK_OUT_ENB_CLR_H 0x32c
+#define CLK_OUT_ENB_SET_U 0x330
+#define CLK_OUT_ENB_CLR_U 0x334
+#define CLK_OUT_ENB_SET_V 0x440
+#define CLK_OUT_ENB_CLR_V 0x444
+#define CLK_OUT_ENB_SET_W 0x448
+#define CLK_OUT_ENB_CLR_W 0x44c
+#define CLK_OUT_ENB_SET_X 0x284
+#define CLK_OUT_ENB_CLR_X 0x288
+#define CLK_OUT_ENB_NUM 6
+
+#define PLLC_BASE 0x80
+#define PLLC_MISC2 0x88
+#define PLLC_MISC 0x8c
+#define PLLC2_BASE 0x4e8
+#define PLLC2_MISC 0x4ec
+#define PLLC3_BASE 0x4fc
+#define PLLC3_MISC 0x500
+#define PLLM_BASE 0x90
+#define PLLM_MISC 0x9c
+#define PLLP_BASE 0xa0
+#define PLLP_MISC 0xac
+#define PLLX_BASE 0xe0
+#define PLLX_MISC 0xe4
+#define PLLX_MISC2 0x514
+#define PLLX_MISC3 0x518
+#define PLLD_BASE 0xd0
+#define PLLD_MISC 0xdc
+#define PLLD2_BASE 0x4b8
+#define PLLD2_MISC 0x4bc
+#define PLLE_BASE 0xe8
+#define PLLE_MISC 0xec
+#define PLLA_BASE 0xb0
+#define PLLA_MISC 0xbc
+#define PLLU_BASE 0xc0
+#define PLLU_MISC 0xcc
+#define PLLRE_BASE 0x4c4
+#define PLLRE_MISC 0x4c8
+
+#define PLL_MISC_LOCK_ENABLE 18
+#define PLLC_MISC_LOCK_ENABLE 24
+#define PLLDU_MISC_LOCK_ENABLE 22
+#define PLLE_MISC_LOCK_ENABLE 9
+#define PLLRE_MISC_LOCK_ENABLE 30
+
+#define PLLC_IDDQ_BIT 26
+#define PLLX_IDDQ_BIT 3
+#define PLLRE_IDDQ_BIT 16
+
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
+#define PLLRE_MISC_LOCK BIT(24)
+#define PLLCX_BASE_LOCK (BIT(26)|BIT(27))
+
+#define PLLE_AUX 0x48c
+#define PLLC_OUT 0x84
+#define PLLM_OUT 0x94
+#define PLLP_OUTA 0xa4
+#define PLLP_OUTB 0xa8
+#define PLLA_OUT 0xb4
+
+#define AUDIO_SYNC_CLK_I2S0 0x4a0
+#define AUDIO_SYNC_CLK_I2S1 0x4a4
+#define AUDIO_SYNC_CLK_I2S2 0x4a8
+#define AUDIO_SYNC_CLK_I2S3 0x4ac
+#define AUDIO_SYNC_CLK_I2S4 0x4b0
+#define AUDIO_SYNC_CLK_SPDIF 0x4b4
+
+#define AUDIO_SYNC_DOUBLER 0x49c
+
+#define PMC_CLK_OUT_CNTRL 0x1a8
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
+#define PMC_CTRL 0
+#define PMC_CTRL_BLINK_ENB 7
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_SHIFT 28
+#define OSC_CTRL_PLL_REF_DIV_SHIFT 26
+
+#define PLLXC_SW_MAX_P 6
+
+#define CCLKG_BURST_POLICY 0x368
+#define CCLKLP_BURST_POLICY 0x370
+#define SCLK_BURST_POLICY 0x028
+#define SYSTEM_CLK_RATE 0x030
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
+
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
+
+#define UTMIPLL_HW_PWRDN_CFG0 0x52c
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
+#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
+#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
+
+#define CLK_SOURCE_I2S0 0x1d8
+#define CLK_SOURCE_I2S1 0x100
+#define CLK_SOURCE_I2S2 0x104
+#define CLK_SOURCE_NDFLASH 0x160
+#define CLK_SOURCE_I2S3 0x3bc
+#define CLK_SOURCE_I2S4 0x3c0
+#define CLK_SOURCE_SPDIF_OUT 0x108
+#define CLK_SOURCE_SPDIF_IN 0x10c
+#define CLK_SOURCE_PWM 0x110
+#define CLK_SOURCE_ADX 0x638
+#define CLK_SOURCE_AMX 0x63c
+#define CLK_SOURCE_HDA 0x428
+#define CLK_SOURCE_HDA2CODEC_2X 0x3e4
+#define CLK_SOURCE_SBC1 0x134
+#define CLK_SOURCE_SBC2 0x118
+#define CLK_SOURCE_SBC3 0x11c
+#define CLK_SOURCE_SBC4 0x1b4
+#define CLK_SOURCE_SBC5 0x3c8
+#define CLK_SOURCE_SBC6 0x3cc
+#define CLK_SOURCE_SATA_OOB 0x420
+#define CLK_SOURCE_SATA 0x424
+#define CLK_SOURCE_NDSPEED 0x3f8
+#define CLK_SOURCE_VFIR 0x168
+#define CLK_SOURCE_SDMMC1 0x150
+#define CLK_SOURCE_SDMMC2 0x154
+#define CLK_SOURCE_SDMMC3 0x1bc
+#define CLK_SOURCE_SDMMC4 0x164
+#define CLK_SOURCE_VDE 0x1c8
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_LA 0x1f8
+#define CLK_SOURCE_TRACE 0x634
+#define CLK_SOURCE_OWR 0x1cc
+#define CLK_SOURCE_NOR 0x1d0
+#define CLK_SOURCE_MIPI 0x174
+#define CLK_SOURCE_I2C1 0x124
+#define CLK_SOURCE_I2C2 0x198
+#define CLK_SOURCE_I2C3 0x1b8
+#define CLK_SOURCE_I2C4 0x3c4
+#define CLK_SOURCE_I2C5 0x128
+#define CLK_SOURCE_UARTA 0x178
+#define CLK_SOURCE_UARTB 0x17c
+#define CLK_SOURCE_UARTC 0x1a0
+#define CLK_SOURCE_UARTD 0x1c0
+#define CLK_SOURCE_UARTE 0x1c4
+#define CLK_SOURCE_UARTA_DBG 0x178
+#define CLK_SOURCE_UARTB_DBG 0x17c
+#define CLK_SOURCE_UARTC_DBG 0x1a0
+#define CLK_SOURCE_UARTD_DBG 0x1c0
+#define CLK_SOURCE_UARTE_DBG 0x1c4
+#define CLK_SOURCE_3D 0x158
+#define CLK_SOURCE_2D 0x15c
+#define CLK_SOURCE_VI_SENSOR 0x1a8
+#define CLK_SOURCE_VI 0x148
+#define CLK_SOURCE_EPP 0x16c
+#define CLK_SOURCE_MSENC 0x1f0
+#define CLK_SOURCE_TSEC 0x1f4
+#define CLK_SOURCE_HOST1X 0x180
+#define CLK_SOURCE_HDMI 0x18c
+#define CLK_SOURCE_DISP1 0x138
+#define CLK_SOURCE_DISP2 0x13c
+#define CLK_SOURCE_CILAB 0x614
+#define CLK_SOURCE_CILCD 0x618
+#define CLK_SOURCE_CILE 0x61c
+#define CLK_SOURCE_DSIALP 0x620
+#define CLK_SOURCE_DSIBLP 0x624
+#define CLK_SOURCE_TSENSOR 0x3b8
+#define CLK_SOURCE_D_AUDIO 0x3d0
+#define CLK_SOURCE_DAM0 0x3d8
+#define CLK_SOURCE_DAM1 0x3dc
+#define CLK_SOURCE_DAM2 0x3e0
+#define CLK_SOURCE_ACTMON 0x3e8
+#define CLK_SOURCE_EXTERN1 0x3ec
+#define CLK_SOURCE_EXTERN2 0x3f0
+#define CLK_SOURCE_EXTERN3 0x3f4
+#define CLK_SOURCE_I2CSLOW 0x3fc
+#define CLK_SOURCE_SE 0x42c
+#define CLK_SOURCE_MSELECT 0x3b4
+#define CLK_SOURCE_SOC_THERM 0x644
+#define CLK_SOURCE_XUSB_HOST_SRC 0x600
+#define CLK_SOURCE_XUSB_FALCON_SRC 0x604
+#define CLK_SOURCE_XUSB_FS_SRC 0x608
+#define CLK_SOURCE_XUSB_SS_SRC 0x610
+#define CLK_SOURCE_XUSB_DEV_SRC 0x60c
+#define CLK_SOURCE_EMC 0x19c
+
+static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
+
+static void __iomem *clk_base;
+static void __iomem *pmc_base;
+
+static DEFINE_SPINLOCK(pll_d_lock);
+static DEFINE_SPINLOCK(pll_d2_lock);
+static DEFINE_SPINLOCK(pll_u_lock);
+static DEFINE_SPINLOCK(pll_div_lock);
+static DEFINE_SPINLOCK(pll_re_lock);
+static DEFINE_SPINLOCK(clk_doubler_lock);
+static DEFINE_SPINLOCK(clk_out_lock);
+static DEFINE_SPINLOCK(sysrate_lock);
+
+static struct pdiv_map pllxc_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 3, .hw_val = 2 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 5, .hw_val = 4 },
+ { .pdiv = 6, .hw_val = 5 },
+ { .pdiv = 8, .hw_val = 6 },
+ { .pdiv = 10, .hw_val = 7 },
+ { .pdiv = 12, .hw_val = 8 },
+ { .pdiv = 16, .hw_val = 9 },
+ { .pdiv = 12, .hw_val = 10 },
+ { .pdiv = 16, .hw_val = 11 },
+ { .pdiv = 20, .hw_val = 12 },
+ { .pdiv = 24, .hw_val = 13 },
+ { .pdiv = 32, .hw_val = 14 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
+ { 12000000, 624000000, 104, 0, 2},
+ { 12000000, 600000000, 100, 0, 2},
+ { 13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */
+ { 16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */
+ { 19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */
+ { 26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_params pll_c_params = {
+ .input_min = 12000000,
+ .input_max = 800000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 600000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLC_BASE,
+ .misc_reg = PLLC_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLC_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLC_MISC,
+ .iddq_bit_idx = PLLC_IDDQ_BIT,
+ .max_p = PLLXC_SW_MAX_P,
+ .dyn_ramp_reg = PLLC_MISC2,
+ .stepa_shift = 17,
+ .stepb_shift = 9,
+ .pdiv_tohw = pllxc_p,
+};
+
+static struct pdiv_map pllc_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 8, .hw_val = 5 },
+ { .pdiv = 16, .hw_val = 7 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = {
+ {12000000, 600000000, 100, 0, 2},
+ {13000000, 600000000, 92, 0, 2}, /* actual: 598.0 MHz */
+ {16800000, 600000000, 71, 0, 2}, /* actual: 596.4 MHz */
+ {19200000, 600000000, 62, 0, 2}, /* actual: 595.2 MHz */
+ {26000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_c2_params = {
+ .input_min = 12000000,
+ .input_max = 48000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000,
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC2_BASE,
+ .misc_reg = PLLC2_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .pdiv_tohw = pllc_p,
+ .ext_misc_reg[0] = 0x4f0,
+ .ext_misc_reg[1] = 0x4f4,
+ .ext_misc_reg[2] = 0x4f8,
+};
+
+static struct tegra_clk_pll_params pll_c3_params = {
+ .input_min = 12000000,
+ .input_max = 48000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000,
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC3_BASE,
+ .misc_reg = PLLC3_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .pdiv_tohw = pllc_p,
+ .ext_misc_reg[0] = 0x504,
+ .ext_misc_reg[1] = 0x508,
+ .ext_misc_reg[2] = 0x50c,
+};
+
+static struct pdiv_map pllm_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
+ {12000000, 800000000, 66, 0, 1}, /* actual: 792.0 MHz */
+ {13000000, 800000000, 61, 0, 1}, /* actual: 793.0 MHz */
+ {16800000, 800000000, 47, 0, 1}, /* actual: 789.6 MHz */
+ {19200000, 800000000, 41, 0, 1}, /* actual: 787.2 MHz */
+ {26000000, 800000000, 61, 1, 1}, /* actual: 793.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_m_params = {
+ .input_min = 12000000,
+ .input_max = 500000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 400000000,
+ .vco_max = 1066000000,
+ .base_reg = PLLM_BASE,
+ .misc_reg = PLLM_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .max_p = 2,
+ .pdiv_tohw = pllm_p,
+};
+
+static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
+ {12000000, 216000000, 432, 12, 1, 8},
+ {13000000, 216000000, 432, 13, 1, 8},
+ {16800000, 216000000, 360, 14, 1, 8},
+ {19200000, 216000000, 360, 16, 1, 8},
+ {26000000, 216000000, 432, 26, 1, 8},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_p_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 200000000,
+ .vco_max = 700000000,
+ .base_reg = PLLP_BASE,
+ .misc_reg = PLLP_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
+ {9600000, 282240000, 147, 5, 0, 4},
+ {9600000, 368640000, 192, 5, 0, 4},
+ {9600000, 240000000, 200, 8, 0, 8},
+
+ {28800000, 282240000, 245, 25, 0, 8},
+ {28800000, 368640000, 320, 25, 0, 8},
+ {28800000, 240000000, 200, 24, 0, 8},
+ {0, 0, 0, 0, 0, 0},
+};
+
+
+static struct tegra_clk_pll_params pll_a_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 200000000,
+ .vco_max = 700000000,
+ .base_reg = PLLA_BASE,
+ .misc_reg = PLLA_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
+ {12000000, 216000000, 864, 12, 2, 12},
+ {13000000, 216000000, 864, 13, 2, 12},
+ {16800000, 216000000, 720, 14, 2, 12},
+ {19200000, 216000000, 720, 16, 2, 12},
+ {26000000, 216000000, 864, 26, 2, 12},
+
+ {12000000, 594000000, 594, 12, 0, 12},
+ {13000000, 594000000, 594, 13, 0, 12},
+ {16800000, 594000000, 495, 14, 0, 12},
+ {19200000, 594000000, 495, 16, 0, 12},
+ {26000000, 594000000, 594, 26, 0, 12},
+
+ {12000000, 1000000000, 1000, 12, 0, 12},
+ {13000000, 1000000000, 1000, 13, 0, 12},
+ {19200000, 1000000000, 625, 12, 0, 12},
+ {26000000, 1000000000, 1000, 26, 0, 12},
+
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_d_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 500000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD_BASE,
+ .misc_reg = PLLD_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct tegra_clk_pll_params pll_d2_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 500000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD2_BASE,
+ .misc_reg = PLLD2_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+};
+
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
+ {12000000, 480000000, 960, 12, 0, 12},
+ {13000000, 480000000, 960, 13, 0, 12},
+ {16800000, 480000000, 400, 7, 0, 5},
+ {19200000, 480000000, 200, 4, 0, 3},
+ {26000000, 480000000, 960, 26, 0, 12},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_u_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 480000000,
+ .vco_max = 960000000,
+ .base_reg = PLLU_BASE,
+ .misc_reg = PLLU_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
+};
+
+static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
+ /* 1 GHz */
+ {12000000, 1000000000, 83, 0, 1}, /* actual: 996.0 MHz */
+ {13000000, 1000000000, 76, 0, 1}, /* actual: 988.0 MHz */
+ {16800000, 1000000000, 59, 0, 1}, /* actual: 991.2 MHz */
+ {19200000, 1000000000, 52, 0, 1}, /* actual: 998.4 MHz */
+ {26000000, 1000000000, 76, 1, 1}, /* actual: 988.0 MHz */
+
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_x_params = {
+ .input_min = 12000000,
+ .input_max = 800000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 700000000,
+ .vco_max = 2400000000U,
+ .base_reg = PLLX_BASE,
+ .misc_reg = PLLX_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLX_MISC3,
+ .iddq_bit_idx = PLLX_IDDQ_BIT,
+ .max_p = PLLXC_SW_MAX_P,
+ .dyn_ramp_reg = PLLX_MISC2,
+ .stepa_shift = 16,
+ .stepb_shift = 24,
+ .pdiv_tohw = pllxc_p,
+};
+
+static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
+ /* PLLE special case: use cpcon field to store cml divider value */
+ {336000000, 100000000, 100, 21, 16, 11},
+ {312000000, 100000000, 200, 26, 24, 13},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_e_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 75000000,
+ .vco_min = 1600000000,
+ .vco_max = 2400000000U,
+ .base_reg = PLLE_BASE,
+ .misc_reg = PLLE_MISC,
+ .aux_reg = PLLE_AUX,
+ .lock_mask = PLLE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+};
+
+static struct tegra_clk_pll_params pll_re_vco_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */
+ .vco_min = 300000000,
+ .vco_max = 600000000,
+ .base_reg = PLLRE_BASE,
+ .misc_reg = PLLRE_MISC,
+ .lock_mask = PLLRE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLRE_MISC,
+ .iddq_bit_idx = PLLRE_IDDQ_BIT,
+};
+
+/* Peripheral clock registers */
+
+static struct tegra_clk_periph_regs periph_l_regs = {
+ .enb_reg = CLK_OUT_ENB_L,
+ .enb_set_reg = CLK_OUT_ENB_SET_L,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_L,
+ .rst_reg = RST_DEVICES_L,
+ .rst_set_reg = RST_DEVICES_SET_L,
+ .rst_clr_reg = RST_DEVICES_CLR_L,
+};
+
+static struct tegra_clk_periph_regs periph_h_regs = {
+ .enb_reg = CLK_OUT_ENB_H,
+ .enb_set_reg = CLK_OUT_ENB_SET_H,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_H,
+ .rst_reg = RST_DEVICES_H,
+ .rst_set_reg = RST_DEVICES_SET_H,
+ .rst_clr_reg = RST_DEVICES_CLR_H,
+};
+
+static struct tegra_clk_periph_regs periph_u_regs = {
+ .enb_reg = CLK_OUT_ENB_U,
+ .enb_set_reg = CLK_OUT_ENB_SET_U,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_U,
+ .rst_reg = RST_DEVICES_U,
+ .rst_set_reg = RST_DEVICES_SET_U,
+ .rst_clr_reg = RST_DEVICES_CLR_U,
+};
+
+static struct tegra_clk_periph_regs periph_v_regs = {
+ .enb_reg = CLK_OUT_ENB_V,
+ .enb_set_reg = CLK_OUT_ENB_SET_V,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_V,
+ .rst_reg = RST_DEVICES_V,
+ .rst_set_reg = RST_DEVICES_SET_V,
+ .rst_clr_reg = RST_DEVICES_CLR_V,
+};
+
+static struct tegra_clk_periph_regs periph_w_regs = {
+ .enb_reg = CLK_OUT_ENB_W,
+ .enb_set_reg = CLK_OUT_ENB_SET_W,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_W,
+ .rst_reg = RST_DEVICES_W,
+ .rst_set_reg = RST_DEVICES_SET_W,
+ .rst_clr_reg = RST_DEVICES_CLR_W,
+};
+
+/* possible OSC frequencies in Hz */
+static unsigned long tegra114_input_freq[] = {
+ [0] = 13000000,
+ [1] = 16800000,
+ [4] = 19200000,
+ [5] = 38400000,
+ [8] = 12000000,
+ [9] = 48000000,
+ [12] = 260000000,
+};
+
+#define MASK(x) (BIT(x) - 1)
+
+#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id, \
+ _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_MUX_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _gate_flags, _clk_id, flags)\
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id, \
+ _parents##_idx, flags)
+
+#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 29, MASK(3), 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags, _clk_id, \
+ _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_INT_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _gate_flags, _clk_id, flags)\
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, flags)
+
+#define TEGRA_INIT_DATA_INT8(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs,\
+ _clk_num, periph_clk_enb_refcnt, 0, _clk_id, \
+ _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_I2C(_name, _con_id, _dev_id, _parents, _offset,\
+ _clk_num, _regs, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ 30, MASK(2), 0, 0, 16, 0, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, 0, _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
+ _mux_shift, _mux_mask, _clk_num, _regs, \
+ _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
+ _mux_shift, _mux_mask, 0, 0, 0, 0, 0, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_XUSB(_name, _con_id, _dev_id, _parents, _offset, \
+ _clk_num, _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset, \
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
+ _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ _clk_id, _parents##_idx, 0)
+
+#define TEGRA_INIT_DATA_AUDIO(_name, _con_id, _dev_id, _offset, _clk_num,\
+ _regs, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, mux_d_audio_clk, \
+ _offset, 16, 0xE01F, 0, 0, 8, 1, 0, _regs, _clk_num, \
+ periph_clk_enb_refcnt, _gate_flags , _clk_id, \
+ mux_d_audio_clk_idx, 0)
+
+enum tegra114_clk {
+ rtc = 4, timer = 5, uarta = 6, sdmmc2 = 9, i2s1 = 11, i2c1 = 12,
+ ndflash = 13, sdmmc1 = 14, sdmmc4 = 15, pwm = 17, i2s2 = 18, epp = 19,
+ gr_2d = 21, usbd = 22, isp = 23, gr_3d = 24, disp2 = 26, disp1 = 27,
+ host1x = 28, vcp = 29, i2s0 = 30, apbdma = 34, kbc = 36, kfuse = 40,
+ sbc1 = 41, nor = 42, sbc2 = 44, sbc3 = 46, i2c5 = 47, dsia = 48,
+ mipi = 50, hdmi = 51, csi = 52, i2c2 = 54, uartc = 55, mipi_cal = 56,
+ emc, usb2, usb3, vde = 61, bsea = 62, bsev = 63, uartd = 65,
+ i2c3 = 67, sbc4 = 68, sdmmc3 = 69, owr = 71, csite = 73,
+ la = 76, trace = 77, soc_therm = 78, dtv = 79, ndspeed = 80,
+ i2cslow = 81, dsib = 82, tsec = 83, xusb_host = 89, msenc = 91,
+ csus = 92, mselect = 99, tsensor = 100, i2s3 = 101, i2s4 = 102,
+ i2c4 = 103, sbc5 = 104, sbc6 = 105, d_audio, apbif = 107, dam0, dam1,
+ dam2, hda2codec_2x = 111, audio0_2x = 113, audio1_2x, audio2_2x,
+ audio3_2x, audio4_2x, spdif_2x, actmon = 119, extern1 = 120,
+ extern2 = 121, extern3 = 122, hda = 125, se = 127, hda2hdmi = 128,
+ cilab = 144, cilcd = 145, cile = 146, dsialp = 147, dsiblp = 148,
+ dds = 150, dp2 = 152, amx = 153, adx = 154, xusb_ss = 156, uartb = 192,
+ vfir, spdif_in, spdif_out, vi, vi_sensor, fuse, fuse_burn, clk_32k,
+ clk_m, clk_m_div2, clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_c2,
+ pll_c3, pll_m, pll_m_out1, pll_p, pll_p_out1, pll_p_out2, pll_p_out3,
+ pll_p_out4, pll_a, pll_a_out0, pll_d, pll_d_out0, pll_d2, pll_d2_out0,
+ pll_u, pll_u_480M, pll_u_60M, pll_u_48M, pll_u_12M, pll_x, pll_x_out0,
+ pll_re_vco, pll_re_out, pll_e_out0, spdif_in_sync, i2s0_sync,
+ i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync, vimclk_sync, audio0,
+ audio1, audio2, audio3, audio4, spdif, clk_out_1, clk_out_2, clk_out_3,
+ blink, xusb_host_src = 252, xusb_falcon_src, xusb_fs_src, xusb_ss_src,
+ xusb_dev_src, xusb_dev, xusb_hs_src, sclk, hclk, pclk, cclk_g, cclk_lp,
+
+ /* Mux clocks */
+
+ audio0_mux = 300, audio1_mux, audio2_mux, audio3_mux, audio4_mux,
+ spdif_mux, clk_out_1_mux, clk_out_2_mux, clk_out_3_mux, dsia_mux,
+ dsib_mux, clk_max,
+};
+
+struct utmi_clk_param {
+ /* Oscillator Frequency in KHz */
+ u32 osc_frequency;
+ /* UTMIP PLL Enable Delay Count */
+ u8 enable_delay_count;
+ /* UTMIP PLL Stable count */
+ u8 stable_count;
+ /* UTMIP PLL Active delay count */
+ u8 active_delay_count;
+ /* UTMIP PLL Xtal frequency count */
+ u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+ {.osc_frequency = 13000000, .enable_delay_count = 0x02,
+ .stable_count = 0x33, .active_delay_count = 0x05,
+ .xtal_freq_count = 0x7F},
+ {.osc_frequency = 19200000, .enable_delay_count = 0x03,
+ .stable_count = 0x4B, .active_delay_count = 0x06,
+ .xtal_freq_count = 0xBB},
+ {.osc_frequency = 12000000, .enable_delay_count = 0x02,
+ .stable_count = 0x2F, .active_delay_count = 0x04,
+ .xtal_freq_count = 0x76},
+ {.osc_frequency = 26000000, .enable_delay_count = 0x04,
+ .stable_count = 0x66, .active_delay_count = 0x09,
+ .xtal_freq_count = 0xFE},
+ {.osc_frequency = 16800000, .enable_delay_count = 0x03,
+ .stable_count = 0x41, .active_delay_count = 0x0A,
+ .xtal_freq_count = 0xA4},
+};
+
+/* peripheral mux definitions */
+
+#define MUX_I2S_SPDIF(_id) \
+static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { "pll_a_out0", \
+ #_id, "pll_p",\
+ "clk_m"};
+MUX_I2S_SPDIF(audio0)
+MUX_I2S_SPDIF(audio1)
+MUX_I2S_SPDIF(audio2)
+MUX_I2S_SPDIF(audio3)
+MUX_I2S_SPDIF(audio4)
+MUX_I2S_SPDIF(audio)
+
+#define mux_pllaout0_audio0_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio1_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio2_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio3_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio4_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio_2x_pllp_clkm_idx NULL
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+ "pll_p", "pll_c", "pll_m", "clk_m"
+};
+#define mux_pllp_pllc_pllm_clkm_idx NULL
+
+static const char *mux_pllp_pllc_pllm[] = { "pll_p", "pll_c", "pll_m" };
+#define mux_pllp_pllc_pllm_idx NULL
+
+static const char *mux_pllp_pllc_clk32_clkm[] = {
+ "pll_p", "pll_c", "clk_32k", "clk_m"
+};
+#define mux_pllp_pllc_clk32_clkm_idx NULL
+
+static const char *mux_plla_pllc_pllp_clkm[] = {
+ "pll_a_out0", "pll_c", "pll_p", "clk_m"
+};
+#define mux_plla_pllc_pllp_clkm_idx mux_pllp_pllc_pllm_clkm_idx
+
+static const char *mux_pllp_pllc2_c_c3_pllm_clkm[] = {
+ "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_m", "clk_m"
+};
+static u32 mux_pllp_pllc2_c_c3_pllm_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
+};
+
+static const char *mux_pllp_clkm[] = {
+ "pll_p", "clk_m"
+};
+static u32 mux_pllp_clkm_idx[] = {
+ [0] = 0, [1] = 3,
+};
+
+static const char *mux_pllm_pllc2_c_c3_pllp_plla[] = {
+ "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0"
+};
+#define mux_pllm_pllc2_c_c3_pllp_plla_idx mux_pllp_pllc2_c_c3_pllm_clkm_idx
+
+static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+ "pll_p", "pll_m", "pll_d_out0", "pll_a_out0", "pll_c",
+ "pll_d2_out0", "clk_m"
+};
+#define mux_pllp_pllm_plld_plla_pllc_plld2_clkm_idx NULL
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+ "pll_m", "pll_c", "pll_p", "pll_a_out0"
+};
+#define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx
+
+static const char *mux_pllp_pllc_clkm[] = {
+ "pll_p", "pll_c", "pll_m"
+};
+static u32 mux_pllp_pllc_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3,
+};
+
+static const char *mux_pllp_pllc_clkm_clk32[] = {
+ "pll_p", "pll_c", "clk_m", "clk_32k"
+};
+#define mux_pllp_pllc_clkm_clk32_idx NULL
+
+static const char *mux_plla_clk32_pllp_clkm_plle[] = {
+ "pll_a_out0", "clk_32k", "pll_p", "clk_m", "pll_e_out0"
+};
+#define mux_plla_clk32_pllp_clkm_plle_idx NULL
+
+static const char *mux_clkm_pllp_pllc_pllre[] = {
+ "clk_m", "pll_p", "pll_c", "pll_re_out"
+};
+static u32 mux_clkm_pllp_pllc_pllre_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 5,
+};
+
+static const char *mux_clkm_48M_pllp_480M[] = {
+ "clk_m", "pll_u_48M", "pll_p", "pll_u_480M"
+};
+#define mux_clkm_48M_pllp_480M_idx NULL
+
+static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
+ "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
+};
+static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7,
+};
+
+static const char *mux_plld_out0_plld2_out0[] = {
+ "pll_d_out0", "pll_d2_out0",
+};
+#define mux_plld_out0_plld2_out0_idx NULL
+
+static const char *mux_d_audio_clk[] = {
+ "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
+};
+static u32 mux_d_audio_clk_idx[] = {
+ [0] = 0, [1] = 0x8000, [2] = 0xc000, [3] = 0xE000, [4] = 0xE001,
+ [5] = 0xE002, [6] = 0xE003, [7] = 0xE004, [8] = 0xE005, [9] = 0xE007,
+};
+
+static const char *mux_pllmcp_clkm[] = {
+ "pll_m_out0", "pll_c_out0", "pll_p_out0", "clk_m", "pll_m_ud",
+};
+
+static const struct clk_div_table pll_re_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 5 },
+ { .val = 5, .div = 6 },
+ { .val = 0, .div = 0 },
+};
+
+static struct clk *clks[clk_max];
+static struct clk_onecell_data clk_data;
+
+static unsigned long osc_freq;
+static unsigned long pll_ref_freq;
+
+static int __init tegra114_osc_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+ u32 val, pll_ref_div;
+
+ val = readl_relaxed(clk_base + OSC_CTRL);
+
+ osc_freq = tegra114_input_freq[val >> OSC_CTRL_OSC_FREQ_SHIFT];
+ if (!osc_freq) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* clk_m */
+ clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
+ osc_freq);
+ clk_register_clkdev(clk, "clk_m", NULL);
+ clks[clk_m] = clk;
+
+ /* pll_ref */
+ val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3;
+ pll_ref_div = 1 << val;
+ clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
+ CLK_SET_RATE_PARENT, 1, pll_ref_div);
+ clk_register_clkdev(clk, "pll_ref", NULL);
+ clks[pll_ref] = clk;
+
+ pll_ref_freq = osc_freq / pll_ref_div;
+
+ return 0;
+}
+
+static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+
+ /* clk_32k */
+ clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
+ 32768);
+ clk_register_clkdev(clk, "clk_32k", NULL);
+ clks[clk_32k] = clk;
+
+ /* clk_m_div2 */
+ clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "clk_m_div2", NULL);
+ clks[clk_m_div2] = clk;
+
+ /* clk_m_div4 */
+ clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 4);
+ clk_register_clkdev(clk, "clk_m_div4", NULL);
+ clks[clk_m_div4] = clk;
+
+}
+
+static __init void tegra114_utmi_param_configure(void __iomem *clk_base)
+{
+ u32 reg;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (osc_freq == utmi_parameters[i].osc_frequency)
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(utmi_parameters)) {
+ pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
+ osc_freq);
+ return;
+ }
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL stable and active counts */
+ /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
+ reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
+
+ reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
+ active_delay_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
+ enable_delay_count);
+
+ reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
+ xtal_freq_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+
+ /* Setup HW control of UTMIPLL */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
+ reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
+ reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+
+ udelay(1);
+
+ /* Setup SW override of UTMIPLL assuming USB2.0
+ ports are assigned to USB2 */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
+ reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ udelay(1);
+
+ /* Enable HW control UTMIPLL */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+}
+
+static void __init _clip_vco_min(struct tegra_clk_pll_params *pll_params)
+{
+ pll_params->vco_min =
+ DIV_ROUND_UP(pll_params->vco_min, pll_ref_freq) * pll_ref_freq;
+}
+
+static int __init _setup_dynamic_ramp(struct tegra_clk_pll_params *pll_params,
+ void __iomem *clk_base)
+{
+ u32 val;
+ u32 step_a, step_b;
+
+ switch (pll_ref_freq) {
+ case 12000000:
+ case 13000000:
+ case 26000000:
+ step_a = 0x2B;
+ step_b = 0x0B;
+ break;
+ case 16800000:
+ step_a = 0x1A;
+ step_b = 0x09;
+ break;
+ case 19200000:
+ step_a = 0x12;
+ step_b = 0x08;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, pll_ref_freq);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ val = step_a << pll_params->stepa_shift;
+ val |= step_b << pll_params->stepb_shift;
+ writel_relaxed(val, clk_base + pll_params->dyn_ramp_reg);
+
+ return 0;
+}
+
+static void __init _init_iddq(struct tegra_clk_pll_params *pll_params,
+ void __iomem *clk_base)
+{
+ u32 val, val_iddq;
+
+ val = readl_relaxed(clk_base + pll_params->base_reg);
+ val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg);
+
+ if (val & BIT(30))
+ WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx));
+ else {
+ val_iddq |= BIT(pll_params->iddq_bit_idx);
+ writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg);
+ }
+}
+
+static void __init tegra114_pll_init(void __iomem *clk_base,
+ void __iomem *pmc)
+{
+ u32 val;
+ struct clk *clk;
+
+ /* PLLC */
+ _clip_vco_min(&pll_c_params);
+ if (_setup_dynamic_ramp(&pll_c_params, clk_base) >= 0) {
+ _init_iddq(&pll_c_params, clk_base);
+ clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base,
+ pmc, 0, 0, &pll_c_params, TEGRA_PLL_USE_LOCK,
+ pll_c_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c", NULL);
+ clks[pll_c] = clk;
+
+ /* PLLC_OUT1 */
+ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
+ clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
+ clk_base + PLLC_OUT, 1, 0,
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_c_out1", NULL);
+ clks[pll_c_out1] = clk;
+ }
+
+ /* PLLC2 */
+ _clip_vco_min(&pll_c2_params);
+ clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, 0,
+ &pll_c2_params, TEGRA_PLL_USE_LOCK,
+ pll_cx_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c2", NULL);
+ clks[pll_c2] = clk;
+
+ /* PLLC3 */
+ _clip_vco_min(&pll_c3_params);
+ clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0, 0,
+ &pll_c3_params, TEGRA_PLL_USE_LOCK,
+ pll_cx_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_c3", NULL);
+ clks[pll_c3] = clk;
+
+ /* PLLP */
+ clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc, 0,
+ 408000000, &pll_p_params,
+ TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK,
+ pll_p_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_p", NULL);
+ clks[pll_p] = clk;
+
+ /* PLLP_OUT1 */
+ clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
+ clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
+ clk_base + PLLP_OUTA, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out1", NULL);
+ clks[pll_p_out1] = clk;
+
+ /* PLLP_OUT2 */
+ clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
+ clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
+ clk_base + PLLP_OUTA, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out2", NULL);
+ clks[pll_p_out2] = clk;
+
+ /* PLLP_OUT3 */
+ clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
+ clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
+ clk_base + PLLP_OUTB, 1, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out3", NULL);
+ clks[pll_p_out3] = clk;
+
+ /* PLLP_OUT4 */
+ clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
+ clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
+ TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
+ &pll_div_lock);
+ clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
+ clk_base + PLLP_OUTB, 17, 16,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ &pll_div_lock);
+ clk_register_clkdev(clk, "pll_p_out4", NULL);
+ clks[pll_p_out4] = clk;
+
+ /* PLLM */
+ _clip_vco_min(&pll_m_params);
+ clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
+ &pll_m_params, TEGRA_PLL_USE_LOCK,
+ pll_m_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_m", NULL);
+ clks[pll_m] = clk;
+
+ /* PLLM_OUT1 */
+ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
+ clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
+ clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_m_out1", NULL);
+ clks[pll_m_out1] = clk;
+
+ /* PLLM_UD */
+ clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
+ CLK_SET_RATE_PARENT, 1, 1);
+
+ /* PLLX */
+ _clip_vco_min(&pll_x_params);
+ if (_setup_dynamic_ramp(&pll_x_params, clk_base) >= 0) {
+ _init_iddq(&pll_x_params, clk_base);
+ clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
+ pmc, CLK_IGNORE_UNUSED, 0, &pll_x_params,
+ TEGRA_PLL_USE_LOCK, pll_x_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_x", NULL);
+ clks[pll_x] = clk;
+ }
+
+ /* PLLX_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_x_out0", NULL);
+ clks[pll_x_out0] = clk;
+
+ /* PLLU */
+ val = readl(clk_base + pll_u_params.base_reg);
+ val &= ~BIT(24); /* disable PLLU_OVERRIDE */
+ writel(val, clk_base + pll_u_params.base_reg);
+
+ clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
+ 0, &pll_u_params, TEGRA_PLLU |
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK, pll_u_freq_table, &pll_u_lock);
+ clk_register_clkdev(clk, "pll_u", NULL);
+ clks[pll_u] = clk;
+
+ tegra114_utmi_param_configure(clk_base);
+
+ /* PLLU_480M */
+ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
+ CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
+ 22, 0, &pll_u_lock);
+ clk_register_clkdev(clk, "pll_u_480M", NULL);
+ clks[pll_u_480M] = clk;
+
+ /* PLLU_60M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 8);
+ clk_register_clkdev(clk, "pll_u_60M", NULL);
+ clks[pll_u_60M] = clk;
+
+ /* PLLU_48M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 10);
+ clk_register_clkdev(clk, "pll_u_48M", NULL);
+ clks[pll_u_48M] = clk;
+
+ /* PLLU_12M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 40);
+ clk_register_clkdev(clk, "pll_u_12M", NULL);
+ clks[pll_u_12M] = clk;
+
+ /* PLLD */
+ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0,
+ 0, &pll_d_params,
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d_lock);
+ clk_register_clkdev(clk, "pll_d", NULL);
+ clks[pll_d] = clk;
+
+ /* PLLD_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d_out0", NULL);
+ clks[pll_d_out0] = clk;
+
+ /* PLLD2 */
+ clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc, 0,
+ 0, &pll_d2_params,
+ TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d2_lock);
+ clk_register_clkdev(clk, "pll_d2", NULL);
+ clks[pll_d2] = clk;
+
+ /* PLLD2_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d2_out0", NULL);
+ clks[pll_d2_out0] = clk;
+
+ /* PLLA */
+ clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc, 0,
+ 0, &pll_a_params, TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_a", NULL);
+ clks[pll_a] = clk;
+
+ /* PLLA_OUT0 */
+ clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
+ clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
+ clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_a_out0", NULL);
+ clks[pll_a_out0] = clk;
+
+ /* PLLRE */
+ _clip_vco_min(&pll_re_vco_params);
+ clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc,
+ 0, 0, &pll_re_vco_params, TEGRA_PLL_USE_LOCK,
+ NULL, &pll_re_lock, pll_ref_freq);
+ clk_register_clkdev(clk, "pll_re_vco", NULL);
+ clks[pll_re_vco] = clk;
+
+ clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0,
+ clk_base + PLLRE_BASE, 16, 4, 0,
+ pll_re_div_table, &pll_re_lock);
+ clk_register_clkdev(clk, "pll_re_out", NULL);
+ clks[pll_re_out] = clk;
+
+ /* PLLE */
+ clk = tegra_clk_register_plle_tegra114("pll_e_out0", "pll_re_vco",
+ clk_base, 0, 100000000, &pll_e_params,
+ pll_e_freq_table, NULL);
+ clk_register_clkdev(clk, "pll_e_out0", NULL);
+ clks[pll_e_out0] = clk;
+}
+
+static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
+};
+
+static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern1",
+};
+
+static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern2",
+};
+
+static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern3",
+};
+
+static void __init tegra114_audio_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+
+ /* spdif_in_sync */
+ clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000,
+ 24000000);
+ clk_register_clkdev(clk, "spdif_in_sync", NULL);
+ clks[spdif_in_sync] = clk;
+
+ /* i2s0_sync */
+ clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s0_sync", NULL);
+ clks[i2s0_sync] = clk;
+
+ /* i2s1_sync */
+ clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s1_sync", NULL);
+ clks[i2s1_sync] = clk;
+
+ /* i2s2_sync */
+ clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s2_sync", NULL);
+ clks[i2s2_sync] = clk;
+
+ /* i2s3_sync */
+ clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s3_sync", NULL);
+ clks[i2s3_sync] = clk;
+
+ /* i2s4_sync */
+ clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "i2s4_sync", NULL);
+ clks[i2s4_sync] = clk;
+
+ /* vimclk_sync */
+ clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000);
+ clk_register_clkdev(clk, "vimclk_sync", NULL);
+ clks[vimclk_sync] = clk;
+
+ /* audio0 */
+ clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0,
+ NULL);
+ clks[audio0_mux] = clk;
+ clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S0, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio0", NULL);
+ clks[audio0] = clk;
+
+ /* audio1 */
+ clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0,
+ NULL);
+ clks[audio1_mux] = clk;
+ clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S1, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio1", NULL);
+ clks[audio1] = clk;
+
+ /* audio2 */
+ clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0,
+ NULL);
+ clks[audio2_mux] = clk;
+ clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S2, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio2", NULL);
+ clks[audio2] = clk;
+
+ /* audio3 */
+ clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0,
+ NULL);
+ clks[audio3_mux] = clk;
+ clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S3, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio3", NULL);
+ clks[audio3] = clk;
+
+ /* audio4 */
+ clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0,
+ NULL);
+ clks[audio4_mux] = clk;
+ clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_I2S4, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "audio4", NULL);
+ clks[audio4] = clk;
+
+ /* spdif */
+ clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk), 0,
+ clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0,
+ NULL);
+ clks[spdif_mux] = clk;
+ clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0,
+ clk_base + AUDIO_SYNC_CLK_SPDIF, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ clk_register_clkdev(clk, "spdif", NULL);
+ clks[spdif] = clk;
+
+ /* audio0_2x */
+ clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio0_div", "audio0_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 113, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio0_2x", NULL);
+ clks[audio0_2x] = clk;
+
+ /* audio1_2x */
+ clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio1_div", "audio1_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 114, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio1_2x", NULL);
+ clks[audio1_2x] = clk;
+
+ /* audio2_2x */
+ clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio2_div", "audio2_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 115, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio2_2x", NULL);
+ clks[audio2_2x] = clk;
+
+ /* audio3_2x */
+ clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio3_div", "audio3_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 116, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio3_2x", NULL);
+ clks[audio3_2x] = clk;
+
+ /* audio4_2x */
+ clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("audio4_div", "audio4_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 117, &periph_v_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "audio4_2x", NULL);
+ clks[audio4_2x] = clk;
+
+ /* spdif_2x */
+ clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif",
+ CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider("spdif_div", "spdif_doubler",
+ clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1,
+ 0, &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div",
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ CLK_SET_RATE_PARENT, 118,
+ &periph_v_regs, periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, "spdif_2x", NULL);
+ clks[spdif_2x] = clk;
+}
+
+static void __init tegra114_pmc_clk_init(void __iomem *pmc_base)
+{
+ struct clk *clk;
+
+ /* clk_out_1 */
+ clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_1_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 2, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern1", "clk_out_1");
+ clks[clk_out_1] = clk;
+
+ /* clk_out_2 */
+ clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_2_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 10, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern2", "clk_out_2");
+ clks[clk_out_2] = clk;
+
+ /* clk_out_3 */
+ clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents,
+ ARRAY_SIZE(clk_out1_parents), 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0,
+ &clk_out_lock);
+ clks[clk_out_3_mux] = clk;
+ clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0,
+ pmc_base + PMC_CLK_OUT_CNTRL, 18, 0,
+ &clk_out_lock);
+ clk_register_clkdev(clk, "extern3", "clk_out_3");
+ clks[clk_out_3] = clk;
+
+ /* blink */
+ clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
+ pmc_base + PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
+ clk = clk_register_gate(NULL, "blink", "blink_override", 0,
+ pmc_base + PMC_CTRL,
+ PMC_CTRL_BLINK_ENB, 0, NULL);
+ clk_register_clkdev(clk, "blink", NULL);
+ clks[blink] = clk;
+
+}
+
+static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
+ "pll_p_out3", "pll_p_out2", "unused",
+ "clk_32k", "pll_m_out1" };
+
+static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p", "pll_p_out4", "unused",
+ "unused", "pll_x" };
+
+static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p", "pll_p_out4", "unused",
+ "unused", "pll_x", "pll_x_out0" };
+
+static void __init tegra114_super_clk_init(void __iomem *clk_base)
+{
+ struct clk *clk;
+
+ /* CCLKG */
+ clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
+ ARRAY_SIZE(cclk_g_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKG_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "cclk_g", NULL);
+ clks[cclk_g] = clk;
+
+ /* CCLKLP */
+ clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents,
+ ARRAY_SIZE(cclk_lp_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKLP_BURST_POLICY,
+ 0, 4, 8, 9, NULL);
+ clk_register_clkdev(clk, "cclk_lp", NULL);
+ clks[cclk_lp] = clk;
+
+ /* SCLK */
+ clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+ ARRAY_SIZE(sclk_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + SCLK_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ clk_register_clkdev(clk, "sclk", NULL);
+ clks[sclk] = clk;
+
+ /* HCLK */
+ clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 4, 2, 0,
+ &sysrate_lock);
+ clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
+ 7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
+ clk_register_clkdev(clk, "hclk", NULL);
+ clks[hclk] = clk;
+
+ /* PCLK */
+ clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 0, 2, 0,
+ &sysrate_lock);
+ clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
+ 3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
+ clk_register_clkdev(clk, "pclk", NULL);
+ clks[pclk] = clk;
+}
+
+static struct tegra_periph_init_data tegra_periph_clk_list[] = {
+ TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", mux_pllaout0_audio0_2x_pllp_clkm, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0),
+ TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", mux_pllaout0_audio1_2x_pllp_clkm, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
+ TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", mux_pllaout0_audio2_2x_pllp_clkm, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
+ TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", mux_pllaout0_audio3_2x_pllp_clkm, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3),
+ TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", mux_pllaout0_audio4_2x_pllp_clkm, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4),
+ TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", mux_pllaout0_audio_2x_pllp_clkm, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
+ TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", mux_pllp_pllc_pllm, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
+ TEGRA_INIT_DATA_MUX("pwm", NULL, "pwm", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_PWM, 17, &periph_l_regs, TEGRA_PERIPH_ON_APB, pwm),
+ TEGRA_INIT_DATA_MUX("adx", NULL, "adx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX, 154, &periph_w_regs, TEGRA_PERIPH_ON_APB, adx),
+ TEGRA_INIT_DATA_MUX("amx", NULL, "amx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX, 153, &periph_w_regs, TEGRA_PERIPH_ON_APB, amx),
+ TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda),
+ TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda2codec_2x),
+ TEGRA_INIT_DATA_MUX("sbc1", NULL, "tegra11-spi.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
+ TEGRA_INIT_DATA_MUX("sbc2", NULL, "tegra11-spi.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
+ TEGRA_INIT_DATA_MUX("sbc3", NULL, "tegra11-spi.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
+ TEGRA_INIT_DATA_MUX("sbc4", NULL, "tegra11-spi.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
+ TEGRA_INIT_DATA_MUX("sbc5", NULL, "tegra11-spi.4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5),
+ TEGRA_INIT_DATA_MUX("sbc6", NULL, "tegra11-spi.5", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6),
+ TEGRA_INIT_DATA_MUX8("ndflash", NULL, "tegra_nand", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
+ TEGRA_INIT_DATA_MUX8("ndspeed", NULL, "tegra_nand_speed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
+ TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
+ TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
+ TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
+ TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
+ TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
+ TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
+ TEGRA_INIT_DATA_MUX_FLAGS("csite", NULL, "csite", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite, CLK_IGNORE_UNUSED),
+ TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la),
+ TEGRA_INIT_DATA_MUX("trace", NULL, "trace", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_TRACE, 77, &periph_u_regs, TEGRA_PERIPH_ON_APB, trace),
+ TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
+ TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
+ TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
+ TEGRA_INIT_DATA_I2C("i2c1", "div-clk", "tegra11-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, i2c1),
+ TEGRA_INIT_DATA_I2C("i2c2", "div-clk", "tegra11-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, i2c2),
+ TEGRA_INIT_DATA_I2C("i2c3", "div-clk", "tegra11-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, i2c3),
+ TEGRA_INIT_DATA_I2C("i2c4", "div-clk", "tegra11-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, i2c4),
+ TEGRA_INIT_DATA_I2C("i2c5", "div-clk", "tegra11-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, i2c5),
+ TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta),
+ TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb),
+ TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc),
+ TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd),
+ TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, gr_3d),
+ TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr_2d),
+ TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
+ TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
+ TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
+ TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_h_regs, TEGRA_PERIPH_WAR_1005168, msenc),
+ TEGRA_INIT_DATA_INT8("tsec", NULL, "tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, &periph_u_regs, 0, tsec),
+ TEGRA_INIT_DATA_INT8("host1x", NULL, "host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
+ TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
+ TEGRA_INIT_DATA_MUX("cilab", "cilab", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILAB, 144, &periph_w_regs, 0, cilab),
+ TEGRA_INIT_DATA_MUX("cilcd", "cilcd", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILCD, 145, &periph_w_regs, 0, cilcd),
+ TEGRA_INIT_DATA_MUX("cile", "cile", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILE, 146, &periph_w_regs, 0, cile),
+ TEGRA_INIT_DATA_MUX("dsialp", "dsialp", "tegradc.0", mux_pllp_pllc_clkm, CLK_SOURCE_DSIALP, 147, &periph_w_regs, 0, dsialp),
+ TEGRA_INIT_DATA_MUX("dsiblp", "dsiblp", "tegradc.1", mux_pllp_pllc_clkm, CLK_SOURCE_DSIBLP, 148, &periph_w_regs, 0, dsiblp),
+ TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllp_pllc_clkm_clk32, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor),
+ TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon),
+ TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1),
+ TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2),
+ TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3),
+ TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow),
+ TEGRA_INIT_DATA_INT8("se", NULL, "se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, TEGRA_PERIPH_ON_APB, se),
+ TEGRA_INIT_DATA_INT_FLAGS("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect, CLK_IGNORE_UNUSED),
+ TEGRA_INIT_DATA_MUX8("soc_therm", NULL, "soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, &periph_u_regs, TEGRA_PERIPH_ON_APB, soc_therm),
+ TEGRA_INIT_DATA_XUSB("xusb_host_src", "host_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, &periph_w_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_host_src),
+ TEGRA_INIT_DATA_XUSB("xusb_falcon_src", "falcon_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_falcon_src),
+ TEGRA_INIT_DATA_XUSB("xusb_fs_src", "fs_src", "tegra_xhci", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_fs_src),
+ TEGRA_INIT_DATA_XUSB("xusb_ss_src", "ss_src", "tegra_xhci", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_ss_src),
+ TEGRA_INIT_DATA_XUSB("xusb_dev_src", "dev_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, &periph_u_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_dev_src),
+ TEGRA_INIT_DATA_AUDIO("d_audio", "d_audio", "tegra30-ahub", CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, TEGRA_PERIPH_ON_APB, d_audio),
+ TEGRA_INIT_DATA_AUDIO("dam0", NULL, "tegra30-dam.0", CLK_SOURCE_DAM0, 108, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam0),
+ TEGRA_INIT_DATA_AUDIO("dam1", NULL, "tegra30-dam.1", CLK_SOURCE_DAM1, 109, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam1),
+ TEGRA_INIT_DATA_AUDIO("dam2", NULL, "tegra30-dam.2", CLK_SOURCE_DAM2, 110, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam2),
+};
+
+static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
+ TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP1, 29, 7, 27, &periph_l_regs, 0, disp1),
+ TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP2, 29, 7, 26, &periph_l_regs, 0, disp2),
+};
+
+static __init void tegra114_periph_clk_init(void __iomem *clk_base)
+{
+ struct tegra_periph_init_data *data;
+ struct clk *clk;
+ int i;
+ u32 val;
+
+ /* apbdma */
+ clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base,
+ 0, 34, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[apbdma] = clk;
+
+ /* rtc */
+ clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
+ TEGRA_PERIPH_ON_APB |
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ 0, 4, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "rtc-tegra");
+ clks[rtc] = clk;
+
+ /* kbc */
+ clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
+ TEGRA_PERIPH_ON_APB |
+ TEGRA_PERIPH_NO_RESET, clk_base,
+ 0, 36, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[kbc] = clk;
+
+ /* timer */
+ clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base,
+ 0, 5, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clk_register_clkdev(clk, NULL, "timer");
+ clks[timer] = clk;
+
+ /* kfuse */
+ clk = tegra_clk_register_periph_gate("kfuse", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 40,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clks[kfuse] = clk;
+
+ /* fuse */
+ clk = tegra_clk_register_periph_gate("fuse", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 39,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clks[fuse] = clk;
+
+ /* fuse_burn */
+ clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 39,
+ &periph_h_regs, periph_clk_enb_refcnt);
+ clks[fuse_burn] = clk;
+
+ /* apbif */
+ clk = tegra_clk_register_periph_gate("apbif", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 107,
+ &periph_v_regs, periph_clk_enb_refcnt);
+ clks[apbif] = clk;
+
+ /* hda2hdmi */
+ clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 128,
+ &periph_w_regs, periph_clk_enb_refcnt);
+ clks[hda2hdmi] = clk;
+
+ /* vcp */
+ clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0,
+ 29, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clks[vcp] = clk;
+
+ /* bsea */
+ clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base,
+ 0, 62, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[bsea] = clk;
+
+ /* bsev */
+ clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base,
+ 0, 63, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[bsev] = clk;
+
+ /* mipi-cal */
+ clk = tegra_clk_register_periph_gate("mipi-cal", "clk_m", 0, clk_base,
+ 0, 56, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[mipi_cal] = clk;
+
+ /* usbd */
+ clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base,
+ 0, 22, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clks[usbd] = clk;
+
+ /* usb2 */
+ clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base,
+ 0, 58, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[usb2] = clk;
+
+ /* usb3 */
+ clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base,
+ 0, 59, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[usb3] = clk;
+
+ /* csi */
+ clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
+ 0, 52, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[csi] = clk;
+
+ /* isp */
+ clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0,
+ 23, &periph_l_regs,
+ periph_clk_enb_refcnt);
+ clks[isp] = clk;
+
+ /* csus */
+ clk = tegra_clk_register_periph_gate("csus", "clk_m",
+ TEGRA_PERIPH_NO_RESET, clk_base, 0, 92,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clks[csus] = clk;
+
+ /* dds */
+ clk = tegra_clk_register_periph_gate("dds", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 150,
+ &periph_w_regs, periph_clk_enb_refcnt);
+ clks[dds] = clk;
+
+ /* dp2 */
+ clk = tegra_clk_register_periph_gate("dp2", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 152,
+ &periph_w_regs, periph_clk_enb_refcnt);
+ clks[dp2] = clk;
+
+ /* dtv */
+ clk = tegra_clk_register_periph_gate("dtv", "clk_m",
+ TEGRA_PERIPH_ON_APB, clk_base, 0, 79,
+ &periph_u_regs, periph_clk_enb_refcnt);
+ clks[dtv] = clk;
+
+ /* dsia */
+ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0), 0,
+ clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock);
+ clks[dsia_mux] = clk;
+ clk = tegra_clk_register_periph_gate("dsia", "dsia_mux", 0, clk_base,
+ 0, 48, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[dsia] = clk;
+
+ /* dsib */
+ clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0), 0,
+ clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock);
+ clks[dsib_mux] = clk;
+ clk = tegra_clk_register_periph_gate("dsib", "dsib_mux", 0, clk_base,
+ 0, 82, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clks[dsib] = clk;
+
+ /* xusb_hs_src */
+ val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
+ val |= BIT(25); /* always select PLLU_60M */
+ writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
+
+ clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
+ 1, 1);
+ clks[xusb_hs_src] = clk;
+
+ /* xusb_host */
+ clk = tegra_clk_register_periph_gate("xusb_host", "xusb_host_src", 0,
+ clk_base, 0, 89, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clks[xusb_host] = clk;
+
+ /* xusb_ss */
+ clk = tegra_clk_register_periph_gate("xusb_ss", "xusb_ss_src", 0,
+ clk_base, 0, 156, &periph_w_regs,
+ periph_clk_enb_refcnt);
+ clks[xusb_host] = clk;
+
+ /* xusb_dev */
+ clk = tegra_clk_register_periph_gate("xusb_dev", "xusb_dev_src", 0,
+ clk_base, 0, 95, &periph_u_regs,
+ periph_clk_enb_refcnt);
+ clks[xusb_dev] = clk;
+
+ /* emc */
+ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
+ ARRAY_SIZE(mux_pllmcp_clkm), 0,
+ clk_base + CLK_SOURCE_EMC,
+ 29, 3, 0, NULL);
+ clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base,
+ CLK_IGNORE_UNUSED, 57, &periph_h_regs,
+ periph_clk_enb_refcnt);
+ clks[emc] = clk;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
+ data = &tegra_periph_clk_list[i];
+ clk = tegra_clk_register_periph(data->name, data->parent_names,
+ data->num_parents, &data->periph,
+ clk_base, data->offset, data->flags);
+ clks[data->clk_id] = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
+ data = &tegra_periph_nodiv_clk_list[i];
+ clk = tegra_clk_register_periph_nodiv(data->name,
+ data->parent_names, data->num_parents,
+ &data->periph, clk_base, data->offset);
+ clks[data->clk_id] = clk;
+ }
+}
+
+static struct tegra_cpu_car_ops tegra114_cpu_car_ops;
+
+static const struct of_device_id pmc_match[] __initconst = {
+ { .compatible = "nvidia,tegra114-pmc" },
+ {},
+};
+
+static __initdata struct tegra_clk_init_table init_table[] = {
+ {uarta, pll_p, 408000000, 0},
+ {uartb, pll_p, 408000000, 0},
+ {uartc, pll_p, 408000000, 0},
+ {uartd, pll_p, 408000000, 0},
+ {pll_a, clk_max, 564480000, 1},
+ {pll_a_out0, clk_max, 11289600, 1},
+ {extern1, pll_a_out0, 0, 1},
+ {clk_out_1_mux, extern1, 0, 1},
+ {clk_out_1, clk_max, 0, 1},
+ {i2s0, pll_a_out0, 11289600, 0},
+ {i2s1, pll_a_out0, 11289600, 0},
+ {i2s2, pll_a_out0, 11289600, 0},
+ {i2s3, pll_a_out0, 11289600, 0},
+ {i2s4, pll_a_out0, 11289600, 0},
+ {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
+};
+
+static void __init tegra114_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, clk_max);
+}
+
+void __init tegra114_clock_init(struct device_node *np)
+{
+ struct device_node *node;
+ int i;
+
+ clk_base = of_iomap(np, 0);
+ if (!clk_base) {
+ pr_err("ioremap tegra114 CAR failed\n");
+ return;
+ }
+
+ node = of_find_matching_node(NULL, pmc_match);
+ if (!node) {
+ pr_err("Failed to find pmc node\n");
+ WARN_ON(1);
+ return;
+ }
+
+ pmc_base = of_iomap(node, 0);
+ if (!pmc_base) {
+ pr_err("Can't map pmc registers\n");
+ WARN_ON(1);
+ return;
+ }
+
+ if (tegra114_osc_clk_init(clk_base) < 0)
+ return;
+
+ tegra114_fixed_clk_init(clk_base);
+ tegra114_pll_init(clk_base, pmc_base);
+ tegra114_periph_clk_init(clk_base);
+ tegra114_audio_clk_init(clk_base);
+ tegra114_pmc_clk_init(pmc_base);
+ tegra114_super_clk_init(clk_base);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ if (IS_ERR(clks[i])) {
+ pr_err
+ ("Tegra114 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ }
+ if (!clks[i])
+ clks[i] = ERR_PTR(-EINVAL);
+ }
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ tegra_clk_apply_init_table = tegra114_clock_apply_init_table;
+
+ tegra_cpu_car_ops = &tegra114_cpu_car_ops;
+}
#define PLLE_BASE 0xe8
#define PLLE_MISC 0xec
-#define PLL_BASE_LOCK 27
-#define PLLE_MISC_LOCK 11
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
#define PLL_MISC_LOCK_ENABLE 18
#define PLLDU_MISC_LOCK_ENABLE 22
dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb,
- iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev1, cdev2,
+ iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev2, cdev1,
uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve,
osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0,
pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1,
static struct clk_onecell_data clk_data;
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
- { 12000000, 600000000, 600, 12, 1, 8 },
- { 13000000, 600000000, 600, 13, 1, 8 },
- { 19200000, 600000000, 500, 16, 1, 6 },
- { 26000000, 600000000, 600, 26, 1, 8 },
+ { 12000000, 600000000, 600, 12, 0, 8 },
+ { 13000000, 600000000, 600, 13, 0, 8 },
+ { 19200000, 600000000, 500, 16, 0, 6 },
+ { 26000000, 600000000, 600, 26, 0, 8 },
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
- { 12000000, 666000000, 666, 12, 1, 8},
- { 13000000, 666000000, 666, 13, 1, 8},
- { 19200000, 666000000, 555, 16, 1, 8},
- { 26000000, 666000000, 666, 26, 1, 8},
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
+ { 12000000, 666000000, 666, 12, 0, 8},
+ { 13000000, 666000000, 666, 13, 0, 8},
+ { 19200000, 666000000, 555, 16, 0, 8},
+ { 26000000, 666000000, 666, 26, 0, 8},
+ { 12000000, 600000000, 600, 12, 0, 8},
+ { 13000000, 600000000, 600, 13, 0, 8},
+ { 19200000, 600000000, 375, 12, 0, 6},
+ { 26000000, 600000000, 600, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
- { 12000000, 216000000, 432, 12, 2, 8},
- { 13000000, 216000000, 432, 13, 2, 8},
- { 19200000, 216000000, 90, 4, 2, 1},
- { 26000000, 216000000, 432, 26, 2, 8},
- { 12000000, 432000000, 432, 12, 1, 8},
- { 13000000, 432000000, 432, 13, 1, 8},
- { 19200000, 432000000, 90, 4, 1, 1},
- { 26000000, 432000000, 432, 26, 1, 8},
+ { 12000000, 216000000, 432, 12, 1, 8},
+ { 13000000, 216000000, 432, 13, 1, 8},
+ { 19200000, 216000000, 90, 4, 1, 1},
+ { 26000000, 216000000, 432, 26, 1, 8},
+ { 12000000, 432000000, 432, 12, 0, 8},
+ { 13000000, 432000000, 432, 13, 0, 8},
+ { 19200000, 432000000, 90, 4, 0, 1},
+ { 26000000, 432000000, 432, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
- { 28800000, 56448000, 49, 25, 1, 1},
- { 28800000, 73728000, 64, 25, 1, 1},
- { 28800000, 24000000, 5, 6, 1, 1},
+ { 28800000, 56448000, 49, 25, 0, 1},
+ { 28800000, 73728000, 64, 25, 0, 1},
+ { 28800000, 24000000, 5, 6, 0, 1},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
- { 12000000, 216000000, 216, 12, 1, 4},
- { 13000000, 216000000, 216, 13, 1, 4},
- { 19200000, 216000000, 135, 12, 1, 3},
- { 26000000, 216000000, 216, 26, 1, 4},
+ { 12000000, 216000000, 216, 12, 0, 4},
+ { 13000000, 216000000, 216, 13, 0, 4},
+ { 19200000, 216000000, 135, 12, 0, 3},
+ { 26000000, 216000000, 216, 26, 0, 4},
- { 12000000, 594000000, 594, 12, 1, 8},
- { 13000000, 594000000, 594, 13, 1, 8},
- { 19200000, 594000000, 495, 16, 1, 8},
- { 26000000, 594000000, 594, 26, 1, 8},
+ { 12000000, 594000000, 594, 12, 0, 8},
+ { 13000000, 594000000, 594, 13, 0, 8},
+ { 19200000, 594000000, 495, 16, 0, 8},
+ { 26000000, 594000000, 594, 26, 0, 8},
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
+ { 12000000, 1000000000, 1000, 12, 0, 12},
+ { 13000000, 1000000000, 1000, 13, 0, 12},
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
- { 12000000, 480000000, 960, 12, 2, 0},
- { 13000000, 480000000, 960, 13, 2, 0},
- { 19200000, 480000000, 200, 4, 2, 0},
- { 26000000, 480000000, 960, 26, 2, 0},
+ { 12000000, 480000000, 960, 12, 0, 0},
+ { 13000000, 480000000, 960, 13, 0, 0},
+ { 19200000, 480000000, 200, 4, 0, 0},
+ { 26000000, 480000000, 960, 26, 0, 0},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
/* 1 GHz */
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
+ { 12000000, 1000000000, 1000, 12, 0, 12},
+ { 13000000, 1000000000, 1000, 13, 0, 12},
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 12},
/* 912 MHz */
- { 12000000, 912000000, 912, 12, 1, 12},
- { 13000000, 912000000, 912, 13, 1, 12},
- { 19200000, 912000000, 760, 16, 1, 8},
- { 26000000, 912000000, 912, 26, 1, 12},
+ { 12000000, 912000000, 912, 12, 0, 12},
+ { 13000000, 912000000, 912, 13, 0, 12},
+ { 19200000, 912000000, 760, 16, 0, 8},
+ { 26000000, 912000000, 912, 26, 0, 12},
/* 816 MHz */
- { 12000000, 816000000, 816, 12, 1, 12},
- { 13000000, 816000000, 816, 13, 1, 12},
- { 19200000, 816000000, 680, 16, 1, 8},
- { 26000000, 816000000, 816, 26, 1, 12},
+ { 12000000, 816000000, 816, 12, 0, 12},
+ { 13000000, 816000000, 816, 13, 0, 12},
+ { 19200000, 816000000, 680, 16, 0, 8},
+ { 26000000, 816000000, 816, 26, 0, 12},
/* 760 MHz */
- { 12000000, 760000000, 760, 12, 1, 12},
- { 13000000, 760000000, 760, 13, 1, 12},
- { 19200000, 760000000, 950, 24, 1, 8},
- { 26000000, 760000000, 760, 26, 1, 12},
+ { 12000000, 760000000, 760, 12, 0, 12},
+ { 13000000, 760000000, 760, 13, 0, 12},
+ { 19200000, 760000000, 950, 24, 0, 8},
+ { 26000000, 760000000, 760, 26, 0, 12},
/* 750 MHz */
- { 12000000, 750000000, 750, 12, 1, 12},
- { 13000000, 750000000, 750, 13, 1, 12},
- { 19200000, 750000000, 625, 16, 1, 8},
- { 26000000, 750000000, 750, 26, 1, 12},
+ { 12000000, 750000000, 750, 12, 0, 12},
+ { 13000000, 750000000, 750, 13, 0, 12},
+ { 19200000, 750000000, 625, 16, 0, 8},
+ { 26000000, 750000000, 750, 26, 0, 12},
/* 608 MHz */
- { 12000000, 608000000, 608, 12, 1, 12},
- { 13000000, 608000000, 608, 13, 1, 12},
- { 19200000, 608000000, 380, 12, 1, 8},
- { 26000000, 608000000, 608, 26, 1, 12},
+ { 12000000, 608000000, 608, 12, 0, 12},
+ { 13000000, 608000000, 608, 13, 0, 12},
+ { 19200000, 608000000, 380, 12, 0, 8},
+ { 26000000, 608000000, 608, 26, 0, 12},
/* 456 MHz */
- { 12000000, 456000000, 456, 12, 1, 12},
- { 13000000, 456000000, 456, 13, 1, 12},
- { 19200000, 456000000, 380, 16, 1, 8},
- { 26000000, 456000000, 456, 26, 1, 12},
+ { 12000000, 456000000, 456, 12, 0, 12},
+ { 13000000, 456000000, 456, 13, 0, 12},
+ { 19200000, 456000000, 380, 16, 0, 8},
+ { 26000000, 456000000, 456, 26, 0, 12},
/* 312 MHz */
- { 12000000, 312000000, 312, 12, 1, 12},
- { 13000000, 312000000, 312, 13, 1, 12},
- { 19200000, 312000000, 260, 16, 1, 8},
- { 26000000, 312000000, 312, 26, 1, 12},
+ { 12000000, 312000000, 312, 12, 0, 12},
+ { 13000000, 312000000, 312, 13, 0, 12},
+ { 19200000, 312000000, 260, 16, 0, 8},
+ { 26000000, 312000000, 312, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
- { 12000000, 100000000, 200, 24, 1, 0 },
+ { 12000000, 100000000, 200, 24, 0, 0 },
{ 0, 0, 0, 0, 0, 0 },
};
.vco_max = 1400000000,
.base_reg = PLLC_BASE,
.misc_reg = PLLC_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1200000000,
.base_reg = PLLM_BASE,
.misc_reg = PLLM_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLP_BASE,
.misc_reg = PLLP_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLA_BASE,
.misc_reg = PLLA_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1000000000,
.base_reg = PLLD_BASE,
.misc_reg = PLLD_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
};
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
static struct tegra_clk_pll_params pll_u_params = {
.input_min = 2000000,
.input_max = 40000000,
.vco_max = 960000000,
.base_reg = PLLU_BASE,
.misc_reg = PLLU_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
};
static struct tegra_clk_pll_params pll_x_params = {
.vco_max = 1200000000,
.base_reg = PLLX_BASE,
.misc_reg = PLLX_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 0,
.base_reg = PLLE_BASE,
.misc_reg = PLLE_MISC,
- .lock_bit_idx = PLLE_MISC_LOCK,
+ .lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 0,
};
}
static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
- "pll_p_cclk", "pll_p_out4_cclk",
- "pll_p_out3_cclk", "clk_d", "pll_x" };
+ "pll_p", "pll_p_out4",
+ "pll_p_out3", "clk_d", "pll_x" };
static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
"pll_p_out3", "pll_p_out2", "clk_d",
"clk_32k", "pll_m_out1" };
{
struct clk *clk;
- /*
- * DIV_U71 dividers for CCLK, these dividers are used only
- * if parent clock is fixed rate.
- */
-
- /*
- * Clock input to cclk divided from pll_p using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_cclk", "pll_p",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_cclk", NULL);
-
- /*
- * Clock input to cclk divided from pll_p_out3 using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_out3_cclk", "pll_p_out3",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_out3_cclk", NULL);
-
- /*
- * Clock input to cclk divided from pll_p_out4 using
- * U71 divider of cclk.
- */
- clk = tegra_clk_register_divider("pll_p_out4_cclk", "pll_p_out4",
- clk_base + SUPER_CCLK_DIVIDER, 0,
- TEGRA_DIVIDER_INT, 16, 8, 1, NULL);
- clk_register_clkdev(clk, "pll_p_out4_cclk", NULL);
-
/* CCLK */
clk = tegra_clk_register_super_mux("cclk", cclk_parents,
ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT,
data = &tegra_periph_clk_list[i];
clk = tegra_clk_register_periph(data->name, data->parent_names,
data->num_parents, &data->periph,
- clk_base, data->offset);
+ clk_base, data->offset, data->flags);
clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
{host1x, pll_c, 150000000, 0},
{disp1, pll_p, 600000000, 0},
{disp2, pll_p, 600000000, 0},
+ {gr2d, pll_c, 300000000, 0},
+ {gr3d, pll_c, 300000000, 0},
{clk_max, clk_max, 0, 0}, /* This MUST be the last entry */
};
+static void __init tegra20_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, clk_max);
+}
+
/*
* Some clocks may be used by different drivers depending on the board
* configuration. List those here to register them twice in the clock lookup
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_clk_apply_init_table = tegra20_clock_apply_init_table;
tegra_cpu_car_ops = &tegra20_cpu_car_ops;
}
#define PLLDU_MISC_LOCK_ENABLE 22
#define PLLE_MISC_LOCK_ENABLE 9
-#define PLL_BASE_LOCK 27
-#define PLLE_MISC_LOCK 11
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
#define PLLE_AUX 0x48c
#define PLLC_OUT 0x84
usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
pcie, owr, afi, csite, pciex, avpucq, la, dtv = 79, ndspeed, i2cslow,
dsib, irama = 84, iramb, iramc, iramd, cram2, audio_2x = 90, csus = 92,
- cdev1, cdev2, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
+ cdev2, cdev1, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x,
atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x,
spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda,
};
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
- { 12000000, 1040000000, 520, 6, 1, 8},
- { 13000000, 1040000000, 480, 6, 1, 8},
- { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */
- { 19200000, 1040000000, 325, 6, 1, 6},
- { 26000000, 1040000000, 520, 13, 1, 8},
-
- { 12000000, 832000000, 416, 6, 1, 8},
- { 13000000, 832000000, 832, 13, 1, 8},
- { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */
- { 19200000, 832000000, 260, 6, 1, 8},
- { 26000000, 832000000, 416, 13, 1, 8},
-
- { 12000000, 624000000, 624, 12, 1, 8},
- { 13000000, 624000000, 624, 13, 1, 8},
- { 16800000, 600000000, 520, 14, 1, 8},
- { 19200000, 624000000, 520, 16, 1, 8},
- { 26000000, 624000000, 624, 26, 1, 8},
-
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 16800000, 600000000, 500, 14, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
-
- { 12000000, 520000000, 520, 12, 1, 8},
- { 13000000, 520000000, 520, 13, 1, 8},
- { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */
- { 19200000, 520000000, 325, 12, 1, 6},
- { 26000000, 520000000, 520, 26, 1, 8},
-
- { 12000000, 416000000, 416, 12, 1, 8},
- { 13000000, 416000000, 416, 13, 1, 8},
- { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */
- { 19200000, 416000000, 260, 12, 1, 6},
- { 26000000, 416000000, 416, 26, 1, 8},
+ { 12000000, 1040000000, 520, 6, 0, 8},
+ { 13000000, 1040000000, 480, 6, 0, 8},
+ { 16800000, 1040000000, 495, 8, 0, 8}, /* actual: 1039.5 MHz */
+ { 19200000, 1040000000, 325, 6, 0, 6},
+ { 26000000, 1040000000, 520, 13, 0, 8},
+
+ { 12000000, 832000000, 416, 6, 0, 8},
+ { 13000000, 832000000, 832, 13, 0, 8},
+ { 16800000, 832000000, 396, 8, 0, 8}, /* actual: 831.6 MHz */
+ { 19200000, 832000000, 260, 6, 0, 8},
+ { 26000000, 832000000, 416, 13, 0, 8},
+
+ { 12000000, 624000000, 624, 12, 0, 8},
+ { 13000000, 624000000, 624, 13, 0, 8},
+ { 16800000, 600000000, 520, 14, 0, 8},
+ { 19200000, 624000000, 520, 16, 0, 8},
+ { 26000000, 624000000, 624, 26, 0, 8},
+
+ { 12000000, 600000000, 600, 12, 0, 8},
+ { 13000000, 600000000, 600, 13, 0, 8},
+ { 16800000, 600000000, 500, 14, 0, 8},
+ { 19200000, 600000000, 375, 12, 0, 6},
+ { 26000000, 600000000, 600, 26, 0, 8},
+
+ { 12000000, 520000000, 520, 12, 0, 8},
+ { 13000000, 520000000, 520, 13, 0, 8},
+ { 16800000, 520000000, 495, 16, 0, 8}, /* actual: 519.75 MHz */
+ { 19200000, 520000000, 325, 12, 0, 6},
+ { 26000000, 520000000, 520, 26, 0, 8},
+
+ { 12000000, 416000000, 416, 12, 0, 8},
+ { 13000000, 416000000, 416, 13, 0, 8},
+ { 16800000, 416000000, 396, 16, 0, 8}, /* actual: 415.8 MHz */
+ { 19200000, 416000000, 260, 12, 0, 6},
+ { 26000000, 416000000, 416, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
- { 12000000, 666000000, 666, 12, 1, 8},
- { 13000000, 666000000, 666, 13, 1, 8},
- { 16800000, 666000000, 555, 14, 1, 8},
- { 19200000, 666000000, 555, 16, 1, 8},
- { 26000000, 666000000, 666, 26, 1, 8},
- { 12000000, 600000000, 600, 12, 1, 8},
- { 13000000, 600000000, 600, 13, 1, 8},
- { 16800000, 600000000, 500, 14, 1, 8},
- { 19200000, 600000000, 375, 12, 1, 6},
- { 26000000, 600000000, 600, 26, 1, 8},
+ { 12000000, 666000000, 666, 12, 0, 8},
+ { 13000000, 666000000, 666, 13, 0, 8},
+ { 16800000, 666000000, 555, 14, 0, 8},
+ { 19200000, 666000000, 555, 16, 0, 8},
+ { 26000000, 666000000, 666, 26, 0, 8},
+ { 12000000, 600000000, 600, 12, 0, 8},
+ { 13000000, 600000000, 600, 13, 0, 8},
+ { 16800000, 600000000, 500, 14, 0, 8},
+ { 19200000, 600000000, 375, 12, 0, 6},
+ { 26000000, 600000000, 600, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
- { 12000000, 216000000, 432, 12, 2, 8},
- { 13000000, 216000000, 432, 13, 2, 8},
- { 16800000, 216000000, 360, 14, 2, 8},
- { 19200000, 216000000, 360, 16, 2, 8},
- { 26000000, 216000000, 432, 26, 2, 8},
+ { 12000000, 216000000, 432, 12, 1, 8},
+ { 13000000, 216000000, 432, 13, 1, 8},
+ { 16800000, 216000000, 360, 14, 1, 8},
+ { 19200000, 216000000, 360, 16, 1, 8},
+ { 26000000, 216000000, 432, 26, 1, 8},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
- { 9600000, 564480000, 294, 5, 1, 4},
- { 9600000, 552960000, 288, 5, 1, 4},
- { 9600000, 24000000, 5, 2, 1, 1},
+ { 9600000, 564480000, 294, 5, 0, 4},
+ { 9600000, 552960000, 288, 5, 0, 4},
+ { 9600000, 24000000, 5, 2, 0, 1},
- { 28800000, 56448000, 49, 25, 1, 1},
- { 28800000, 73728000, 64, 25, 1, 1},
- { 28800000, 24000000, 5, 6, 1, 1},
+ { 28800000, 56448000, 49, 25, 0, 1},
+ { 28800000, 73728000, 64, 25, 0, 1},
+ { 28800000, 24000000, 5, 6, 0, 1},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
- { 12000000, 216000000, 216, 12, 1, 4},
- { 13000000, 216000000, 216, 13, 1, 4},
- { 16800000, 216000000, 180, 14, 1, 4},
- { 19200000, 216000000, 180, 16, 1, 4},
- { 26000000, 216000000, 216, 26, 1, 4},
-
- { 12000000, 594000000, 594, 12, 1, 8},
- { 13000000, 594000000, 594, 13, 1, 8},
- { 16800000, 594000000, 495, 14, 1, 8},
- { 19200000, 594000000, 495, 16, 1, 8},
- { 26000000, 594000000, 594, 26, 1, 8},
-
- { 12000000, 1000000000, 1000, 12, 1, 12},
- { 13000000, 1000000000, 1000, 13, 1, 12},
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 12},
+ { 12000000, 216000000, 216, 12, 0, 4},
+ { 13000000, 216000000, 216, 13, 0, 4},
+ { 16800000, 216000000, 180, 14, 0, 4},
+ { 19200000, 216000000, 180, 16, 0, 4},
+ { 26000000, 216000000, 216, 26, 0, 4},
+
+ { 12000000, 594000000, 594, 12, 0, 8},
+ { 13000000, 594000000, 594, 13, 0, 8},
+ { 16800000, 594000000, 495, 14, 0, 8},
+ { 19200000, 594000000, 495, 16, 0, 8},
+ { 26000000, 594000000, 594, 26, 0, 8},
+
+ { 12000000, 1000000000, 1000, 12, 0, 12},
+ { 13000000, 1000000000, 1000, 13, 0, 12},
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
- { 12000000, 480000000, 960, 12, 2, 12},
- { 13000000, 480000000, 960, 13, 2, 12},
- { 16800000, 480000000, 400, 7, 2, 5},
- { 19200000, 480000000, 200, 4, 2, 3},
- { 26000000, 480000000, 960, 26, 2, 12},
+ { 12000000, 480000000, 960, 12, 0, 12},
+ { 13000000, 480000000, 960, 13, 0, 12},
+ { 16800000, 480000000, 400, 7, 0, 5},
+ { 19200000, 480000000, 200, 4, 0, 3},
+ { 26000000, 480000000, 960, 26, 0, 12},
{ 0, 0, 0, 0, 0, 0 },
};
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
/* 1.7 GHz */
- { 12000000, 1700000000, 850, 6, 1, 8},
- { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
- { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
- { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
- { 26000000, 1700000000, 850, 13, 1, 8},
+ { 12000000, 1700000000, 850, 6, 0, 8},
+ { 13000000, 1700000000, 915, 7, 0, 8}, /* actual: 1699.2 MHz */
+ { 16800000, 1700000000, 708, 7, 0, 8}, /* actual: 1699.2 MHz */
+ { 19200000, 1700000000, 885, 10, 0, 8}, /* actual: 1699.2 MHz */
+ { 26000000, 1700000000, 850, 13, 0, 8},
/* 1.6 GHz */
- { 12000000, 1600000000, 800, 6, 1, 8},
- { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
- { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
- { 19200000, 1600000000, 500, 6, 1, 8},
- { 26000000, 1600000000, 800, 13, 1, 8},
+ { 12000000, 1600000000, 800, 6, 0, 8},
+ { 13000000, 1600000000, 738, 6, 0, 8}, /* actual: 1599.0 MHz */
+ { 16800000, 1600000000, 857, 9, 0, 8}, /* actual: 1599.7 MHz */
+ { 19200000, 1600000000, 500, 6, 0, 8},
+ { 26000000, 1600000000, 800, 13, 0, 8},
/* 1.5 GHz */
- { 12000000, 1500000000, 750, 6, 1, 8},
- { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
- { 16800000, 1500000000, 625, 7, 1, 8},
- { 19200000, 1500000000, 625, 8, 1, 8},
- { 26000000, 1500000000, 750, 13, 1, 8},
+ { 12000000, 1500000000, 750, 6, 0, 8},
+ { 13000000, 1500000000, 923, 8, 0, 8}, /* actual: 1499.8 MHz */
+ { 16800000, 1500000000, 625, 7, 0, 8},
+ { 19200000, 1500000000, 625, 8, 0, 8},
+ { 26000000, 1500000000, 750, 13, 0, 8},
/* 1.4 GHz */
- { 12000000, 1400000000, 700, 6, 1, 8},
- { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
- { 16800000, 1400000000, 1000, 12, 1, 8},
- { 19200000, 1400000000, 875, 12, 1, 8},
- { 26000000, 1400000000, 700, 13, 1, 8},
+ { 12000000, 1400000000, 700, 6, 0, 8},
+ { 13000000, 1400000000, 969, 9, 0, 8}, /* actual: 1399.7 MHz */
+ { 16800000, 1400000000, 1000, 12, 0, 8},
+ { 19200000, 1400000000, 875, 12, 0, 8},
+ { 26000000, 1400000000, 700, 13, 0, 8},
/* 1.3 GHz */
- { 12000000, 1300000000, 975, 9, 1, 8},
- { 13000000, 1300000000, 1000, 10, 1, 8},
- { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
- { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
- { 26000000, 1300000000, 650, 13, 1, 8},
+ { 12000000, 1300000000, 975, 9, 0, 8},
+ { 13000000, 1300000000, 1000, 10, 0, 8},
+ { 16800000, 1300000000, 928, 12, 0, 8}, /* actual: 1299.2 MHz */
+ { 19200000, 1300000000, 812, 12, 0, 8}, /* actual: 1299.2 MHz */
+ { 26000000, 1300000000, 650, 13, 0, 8},
/* 1.2 GHz */
- { 12000000, 1200000000, 1000, 10, 1, 8},
- { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
- { 16800000, 1200000000, 1000, 14, 1, 8},
- { 19200000, 1200000000, 1000, 16, 1, 8},
- { 26000000, 1200000000, 600, 13, 1, 8},
+ { 12000000, 1200000000, 1000, 10, 0, 8},
+ { 13000000, 1200000000, 923, 10, 0, 8}, /* actual: 1199.9 MHz */
+ { 16800000, 1200000000, 1000, 14, 0, 8},
+ { 19200000, 1200000000, 1000, 16, 0, 8},
+ { 26000000, 1200000000, 600, 13, 0, 8},
/* 1.1 GHz */
- { 12000000, 1100000000, 825, 9, 1, 8},
- { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
- { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
- { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
- { 26000000, 1100000000, 550, 13, 1, 8},
+ { 12000000, 1100000000, 825, 9, 0, 8},
+ { 13000000, 1100000000, 846, 10, 0, 8}, /* actual: 1099.8 MHz */
+ { 16800000, 1100000000, 982, 15, 0, 8}, /* actual: 1099.8 MHz */
+ { 19200000, 1100000000, 859, 15, 0, 8}, /* actual: 1099.5 MHz */
+ { 26000000, 1100000000, 550, 13, 0, 8},
/* 1 GHz */
- { 12000000, 1000000000, 1000, 12, 1, 8},
- { 13000000, 1000000000, 1000, 13, 1, 8},
- { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
- { 19200000, 1000000000, 625, 12, 1, 8},
- { 26000000, 1000000000, 1000, 26, 1, 8},
+ { 12000000, 1000000000, 1000, 12, 0, 8},
+ { 13000000, 1000000000, 1000, 13, 0, 8},
+ { 16800000, 1000000000, 833, 14, 0, 8}, /* actual: 999.6 MHz */
+ { 19200000, 1000000000, 625, 12, 0, 8},
+ { 26000000, 1000000000, 1000, 26, 0, 8},
{ 0, 0, 0, 0, 0, 0 },
};
.vco_max = 1400000000,
.base_reg = PLLC_BASE,
.misc_reg = PLLC_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1200000000,
.base_reg = PLLM_BASE,
.misc_reg = PLLM_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLP_BASE,
.misc_reg = PLLP_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1400000000,
.base_reg = PLLA_BASE,
.misc_reg = PLLA_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 1000000000,
.base_reg = PLLD_BASE,
.misc_reg = PLLD_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
};
.vco_max = 1000000000,
.base_reg = PLLD2_BASE,
.misc_reg = PLLD2_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
};
.vco_max = 960000000,
.base_reg = PLLU_BASE,
.misc_reg = PLLU_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
};
static struct tegra_clk_pll_params pll_x_params = {
.vco_max = 1700000000,
.base_reg = PLLX_BASE,
.misc_reg = PLLX_MISC,
- .lock_bit_idx = PLL_BASE_LOCK,
+ .lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
.vco_max = 2400000000U,
.base_reg = PLLE_BASE,
.misc_reg = PLLE_MISC,
- .lock_bit_idx = PLLE_MISC_LOCK,
+ .lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 300,
};
data = &tegra_periph_clk_list[i];
clk = tegra_clk_register_periph(data->name, data->parent_names,
data->num_parents, &data->periph,
- clk_base, data->offset);
+ clk_base, data->offset, data->flags);
clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
{disp1, pll_p, 600000000, 0},
{disp2, pll_p, 600000000, 0},
{twd, clk_max, 0, 1},
+ {gr2d, pll_c, 300000000, 0},
+ {gr3d, pll_c, 300000000, 0},
{clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
};
+static void __init tegra30_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, clk_max);
+}
+
/*
* Some clocks may be used by different drivers depending on the board
* configuration. List those here to register them twice in the clock lookup
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_clk_apply_init_table = tegra30_clock_apply_init_table;
tegra_cpu_car_ops = &tegra30_cpu_car_ops;
}
#include "clk.h"
/* Global data of Tegra CPU CAR ops */
-struct tegra_cpu_car_ops *tegra_cpu_car_ops;
+static struct tegra_cpu_car_ops dummy_car_ops;
+struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;
void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max)
static const struct of_device_id tegra_dt_clk_match[] = {
{ .compatible = "nvidia,tegra20-car", .data = tegra20_clock_init },
{ .compatible = "nvidia,tegra30-car", .data = tegra30_clock_init },
+ { .compatible = "nvidia,tegra114-car", .data = tegra114_clock_init },
{ }
};
{
of_clk_init(tegra_dt_clk_match);
}
+
+tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
+
+void __init tegra_clocks_apply_init_table(void)
+{
+ if (!tegra_clk_apply_init_table)
+ return;
+
+ tegra_clk_apply_init_table();
+}
-/*
+ /*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
};
/**
+ * struct pdiv_map - map post divider to hw value
+ *
+ * @pdiv: post divider
+ * @hw_val: value to be written to the PLL hw
+ */
+struct pdiv_map {
+ u8 pdiv;
+ u8 hw_val;
+};
+
+/**
* struct clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
u32 base_reg;
u32 misc_reg;
u32 lock_reg;
- u32 lock_bit_idx;
+ u32 lock_mask;
u32 lock_enable_bit_idx;
+ u32 iddq_reg;
+ u32 iddq_bit_idx;
+ u32 aux_reg;
+ u32 dyn_ramp_reg;
+ u32 ext_misc_reg[3];
+ int stepa_shift;
+ int stepb_shift;
int lock_delay;
+ int max_p;
+ struct pdiv_map *pdiv_tohw;
};
/**
* TEGRA_PLL_FIXED - We are not supposed to change output frequency
* of some plls.
* TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
+ * base register.
+ * TEGRA_PLL_BYPASS - PLL has bypass bit
+ * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
*/
struct tegra_clk_pll {
struct clk_hw hw;
void __iomem *clk_base;
void __iomem *pmc;
- u8 flags;
+ u32 flags;
unsigned long fixed_rate;
spinlock_t *lock;
u8 divn_shift;
#define TEGRA_PLLM BIT(5)
#define TEGRA_PLL_FIXED BIT(6)
#define TEGRA_PLLE_CONFIGURE BIT(7)
+#define TEGRA_PLL_LOCK_MISC BIT(8)
+#define TEGRA_PLL_BYPASS BIT(9)
+#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
+struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
+ void __iomem *clk_base, void __iomem *pmc,
+ unsigned long flags, unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ u32 pll_flags,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock, unsigned long parent_rate);
+
+struct clk *tegra_clk_register_plle_tegra114(const char *name,
+ const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ unsigned long fixed_rate,
+ struct tegra_clk_pll_params *pll_params,
+ struct tegra_clk_pll_freq_table *freq_table,
+ spinlock_t *lock);
+
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
* TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
* bus to flush the write operation in apb bus. This flag indicates
* that this peripheral is in apb bus.
+ * TEGRA_PERIPH_WAR_1005168 - Apply workaround for Tegra114 MSENC bug
*/
struct tegra_clk_periph_gate {
u32 magic;
#define TEGRA_PERIPH_NO_RESET BIT(0)
#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
#define TEGRA_PERIPH_ON_APB BIT(2)
+#define TEGRA_PERIPH_WAR_1005168 BIT(3)
void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
extern const struct clk_ops tegra_clk_periph_gate_ops;
struct clk *tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
- u32 offset);
+ u32 offset, unsigned long flags);
struct clk *tegra_clk_register_periph_nodiv(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset);
-#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags, \
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \
_div_shift, _div_width, _div_frac_width, \
_div_flags, _clk_num, _enb_refcnt, _regs, \
- _gate_flags) \
+ _gate_flags, _table) \
{ \
.mux = { \
.flags = _mux_flags, \
.shift = _mux_shift, \
- .width = _mux_width, \
+ .mask = _mux_mask, \
+ .table = _table, \
}, \
.divider = { \
.flags = _div_flags, \
u32 offset;
const char *con_id;
const char *dev_id;
+ unsigned long flags;
};
-#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
- _mux_shift, _mux_width, _mux_flags, _div_shift, \
+#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, _mux_mask, _mux_flags, _div_shift, \
_div_width, _div_frac_width, _div_flags, _regs, \
- _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table,\
+ _flags) \
{ \
.name = _name, \
.clk_id = _clk_id, \
.parent_names = _parent_names, \
.num_parents = ARRAY_SIZE(_parent_names), \
- .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width, \
+ .periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \
_mux_flags, _div_shift, \
_div_width, _div_frac_width, \
_div_flags, _clk_num, \
_enb_refcnt, _regs, \
- _gate_flags), \
+ _gate_flags, _table), \
.offset = _offset, \
.con_id = _con_id, \
.dev_id = _dev_id, \
+ .flags = _flags \
}
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, _mux_width, _mux_flags, _div_shift, \
+ _div_width, _div_frac_width, _div_flags, _regs, \
+ _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+ _mux_shift, BIT(_mux_width) - 1, _mux_flags, \
+ _div_shift, _div_width, _div_frac_width, _div_flags, \
+ _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
+ NULL, 0)
+
/**
* struct clk_super_mux - super clock
*
static inline void tegra30_clock_init(struct device_node *np) {}
#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+void tegra114_clock_init(struct device_node *np);
+#else
+static inline void tegra114_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA114_SOC */
+
+typedef void (*tegra_clk_apply_init_table_func)(void);
+extern tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
+
#endif /* TEGRA_CLK_H */
struct clk_prcmu {
struct clk_hw hw;
u8 cg_sel;
+ int is_prepared;
int is_enabled;
+ int opp_requested;
};
/* PRCMU clock operations. */
static int clk_prcmu_prepare(struct clk_hw *hw)
{
+ int ret;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- return prcmu_request_clock(clk->cg_sel, true);
+
+ ret = prcmu_request_clock(clk->cg_sel, true);
+ if (!ret)
+ clk->is_prepared = 1;
+
+ return ret;;
}
static void clk_prcmu_unprepare(struct clk_hw *hw)
struct clk_prcmu *clk = to_clk_prcmu(hw);
if (prcmu_request_clock(clk->cg_sel, false))
pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ __clk_get_name(hw->clk));
+ else
+ clk->is_prepared = 0;
+}
+
+static int clk_prcmu_is_prepared(struct clk_hw *hw)
+{
+ struct clk_prcmu *clk = to_clk_prcmu(hw);
+ return clk->is_prepared;
}
static int clk_prcmu_enable(struct clk_hw *hw)
return prcmu_set_clock_rate(clk->cg_sel, rate);
}
-static int request_ape_opp100(bool enable)
-{
- static int reqs;
- int err = 0;
-
- if (enable) {
- if (!reqs)
- err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
- "clock", 100);
- if (!err)
- reqs++;
- } else {
- reqs--;
- if (!reqs)
- prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
- "clock");
- }
- return err;
-}
-
static int clk_prcmu_opp_prepare(struct clk_hw *hw)
{
int err;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- err = request_ape_opp100(true);
- if (err) {
- pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
- __func__, hw->init->name);
- return err;
+ if (!clk->opp_requested) {
+ err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk),
+ 100);
+ if (err) {
+ pr_err("clk_prcmu: %s fail req APE OPP for %s.\n",
+ __func__, __clk_get_name(hw->clk));
+ return err;
+ }
+ clk->opp_requested = 1;
}
err = prcmu_request_clock(clk->cg_sel, true);
- if (err)
- request_ape_opp100(false);
+ if (err) {
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk));
+ clk->opp_requested = 0;
+ return err;
+ }
- return err;
+ clk->is_prepared = 1;
+ return 0;
}
static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
{
struct clk_prcmu *clk = to_clk_prcmu(hw);
- if (prcmu_request_clock(clk->cg_sel, false))
- goto out_error;
- if (request_ape_opp100(false))
- goto out_error;
- return;
-
-out_error:
- pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ if (prcmu_request_clock(clk->cg_sel, false)) {
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (clk->opp_requested) {
+ prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+ (char *)__clk_get_name(hw->clk));
+ clk->opp_requested = 0;
+ }
+
+ clk->is_prepared = 0;
}
static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
int err;
struct clk_prcmu *clk = to_clk_prcmu(hw);
- err = prcmu_request_ape_opp_100_voltage(true);
- if (err) {
- pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
- __func__, hw->init->name);
- return err;
+ if (!clk->opp_requested) {
+ err = prcmu_request_ape_opp_100_voltage(true);
+ if (err) {
+ pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n",
+ __func__, __clk_get_name(hw->clk));
+ return err;
+ }
+ clk->opp_requested = 1;
}
err = prcmu_request_clock(clk->cg_sel, true);
- if (err)
+ if (err) {
prcmu_request_ape_opp_100_voltage(false);
+ clk->opp_requested = 0;
+ return err;
+ }
- return err;
+ clk->is_prepared = 1;
+ return 0;
}
static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
{
struct clk_prcmu *clk = to_clk_prcmu(hw);
- if (prcmu_request_clock(clk->cg_sel, false))
- goto out_error;
- if (prcmu_request_ape_opp_100_voltage(false))
- goto out_error;
- return;
-
-out_error:
- pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
- hw->init->name);
+ if (prcmu_request_clock(clk->cg_sel, false)) {
+ pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (clk->opp_requested) {
+ prcmu_request_ape_opp_100_voltage(false);
+ clk->opp_requested = 0;
+ }
+
+ clk->is_prepared = 0;
}
static struct clk_ops clk_prcmu_scalable_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_gate_ops = {
.prepare = clk_prcmu_prepare,
.unprepare = clk_prcmu_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_opp_gate_ops = {
.prepare = clk_prcmu_opp_prepare,
.unprepare = clk_prcmu_opp_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
.prepare = clk_prcmu_opp_volt_prepare,
.unprepare = clk_prcmu_opp_volt_unprepare,
+ .is_prepared = clk_prcmu_is_prepared,
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
.is_enabled = clk_prcmu_is_enabled,
}
clk->cg_sel = cg_sel;
+ clk->is_prepared = 1;
clk->is_enabled = 1;
+ clk->opp_requested = 0;
/* "rate" can be used for changing the initial frequency */
if (rate)
prcmu_set_clock_rate(cg_sel, rate);
def_bool y if METAG
help
This option enables support for the Meta per-thread timers.
+
+config CLKSRC_EXYNOS_MCT
+ def_bool y if ARCH_EXYNOS
+ help
+ Support for Multi Core Timer controller on Exynos SoCs.
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
+obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
+obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
}
}
-static struct of_device_id bcm2835_time_match[] __initconst = {
- { .compatible = "brcm,bcm2835-system-timer" },
- {}
-};
-
-static void __init bcm2835_timer_init(void)
+static void __init bcm2835_timer_init(struct device_node *node)
{
- struct device_node *node;
void __iomem *base;
u32 freq;
int irq;
struct bcm2835_timer *timer;
- node = of_find_matching_node(NULL, bcm2835_time_match);
- if (!node)
- panic("No bcm2835 timer node");
-
base = of_iomap(node, 0);
if (!base)
panic("Can't remap registers");
{
struct device_node *np;
const struct of_device_id *match;
- void (*init_func)(void);
+ void (*init_func)(struct device_node *);
for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
init_func = match->data;
- init_func();
+ init_func(np);
}
}
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/clocksource.h>
#include <asm/arch_timer.h>
#include <asm/localtimer.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+#define EXYNOS4_MCTREG(x) (x)
+#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
+#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
+#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
+#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
+#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
+#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
+#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
+#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
+#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
+#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
+
+#define MCT_L_TCNTB_OFFSET (0x00)
+#define MCT_L_ICNTB_OFFSET (0x08)
+#define MCT_L_TCON_OFFSET (0x20)
+#define MCT_L_INT_CSTAT_OFFSET (0x30)
+#define MCT_L_INT_ENB_OFFSET (0x34)
+#define MCT_L_WSTAT_OFFSET (0x40)
+#define MCT_G_TCON_START (1 << 8)
+#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
+#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
+#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
+#define MCT_L_TCON_INT_START (1 << 1)
+#define MCT_L_TCON_TIMER_START (1 << 0)
+
#define TICK_BASE_CNT 1
enum {
MCT_INT_PPI
};
+enum {
+ MCT_G0_IRQ,
+ MCT_G1_IRQ,
+ MCT_G2_IRQ,
+ MCT_G3_IRQ,
+ MCT_L0_IRQ,
+ MCT_L1_IRQ,
+ MCT_L2_IRQ,
+ MCT_L3_IRQ,
+ MCT_NR_IRQS,
+};
+
+static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
+static int mct_irqs[MCT_NR_IRQS];
struct mct_clock_event_device {
struct clock_event_device *evt;
- void __iomem *base;
+ unsigned long base;
char name[10];
};
-static void exynos4_mct_write(unsigned int value, void *addr)
+static void exynos4_mct_write(unsigned int value, unsigned long offset)
{
- void __iomem *stat_addr;
+ unsigned long stat_addr;
u32 mask;
u32 i;
- __raw_writel(value, addr);
+ __raw_writel(value, reg_base + offset);
- if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
- u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
- switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
- case (u32) MCT_L_TCON_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
+ stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+ switch (offset & EXYNOS4_MCT_L_MASK) {
+ case MCT_L_TCON_OFFSET:
mask = 1 << 3; /* L_TCON write status */
break;
- case (u32) MCT_L_ICNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ case MCT_L_ICNTB_OFFSET:
mask = 1 << 1; /* L_ICNTB write status */
break;
- case (u32) MCT_L_TCNTB_OFFSET:
- stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ case MCT_L_TCNTB_OFFSET:
mask = 1 << 0; /* L_TCNTB write status */
break;
default:
return;
}
} else {
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
+ switch (offset) {
+ case EXYNOS4_MCT_G_TCON:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 16; /* G_TCON write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
+ case EXYNOS4_MCT_G_COMP0_L:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 0; /* G_COMP0_L write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
+ case EXYNOS4_MCT_G_COMP0_U:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 1; /* G_COMP0_U write status */
break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ case EXYNOS4_MCT_G_COMP0_ADD_INCR:
stat_addr = EXYNOS4_MCT_G_WSTAT;
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
+ case EXYNOS4_MCT_G_CNT_L:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 0; /* G_CNT_L write status */
break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
+ case EXYNOS4_MCT_G_CNT_U:
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
mask = 1 << 1; /* G_CNT_U write status */
break;
/* Wait maximum 1 ms until written values are applied */
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
- if (__raw_readl(stat_addr) & mask) {
- __raw_writel(mask, stat_addr);
+ if (__raw_readl(reg_base + stat_addr) & mask) {
+ __raw_writel(mask, reg_base + stat_addr);
return;
}
- panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
+ panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
}
/* Clocksource handling */
exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
- reg = __raw_readl(EXYNOS4_MCT_G_TCON);
+ reg = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
reg |= MCT_G_TCON_START;
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
static cycle_t exynos4_frc_read(struct clocksource *cs)
{
unsigned int lo, hi;
- u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
do {
hi = hi2;
- lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
- hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
+ lo = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_L);
+ hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
} while (hi != hi2);
return ((cycle_t)hi << 32) | lo;
{
unsigned int tcon;
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
unsigned int tcon;
cycle_t comp_cycle;
- tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
+ tcon = __raw_readl(reg_base + EXYNOS4_MCT_G_TCON);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
mct_comp_device.cpumask = cpumask_of(0);
clockevents_config_and_register(&mct_comp_device, clk_rate,
0xf, 0xffffffff);
-
- if (soc_is_exynos5250())
- setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
- else
- setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
+ setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
{
unsigned long tmp;
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
- void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
+ unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
- tmp = __raw_readl(addr);
+ tmp = __raw_readl(reg_base + offset);
if (tmp & mask) {
tmp &= ~mask;
- exynos4_mct_write(tmp, addr);
+ exynos4_mct_write(tmp, offset);
}
}
/* enable MCT tick interrupt */
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
- tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
+ tmp = __raw_readl(reg_base + mevt->base + MCT_L_TCON_OFFSET);
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
MCT_L_TCON_INTERVAL_MODE;
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ if (__raw_readl(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
return 1;
} else {
{
struct mct_clock_event_device *mevt;
unsigned int cpu = smp_processor_id();
- int mct_lx_irq;
mevt = this_cpu_ptr(&percpu_mct_tick);
mevt->evt = evt;
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
- mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L0 :
- EXYNOS5_IRQ_MCT_L0;
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = mct_lx_irq;
- setup_irq(mct_lx_irq, &mct_tick0_event_irq);
+ evt->irq = mct_irqs[MCT_L0_IRQ];
+ setup_irq(evt->irq, &mct_tick0_event_irq);
} else {
- mct_lx_irq = soc_is_exynos4210() ? EXYNOS4_IRQ_MCT_L1 :
- EXYNOS5_IRQ_MCT_L1;
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = mct_lx_irq;
- setup_irq(mct_lx_irq, &mct_tick1_event_irq);
- irq_set_affinity(mct_lx_irq, cpumask_of(1));
+ evt->irq = mct_irqs[MCT_L1_IRQ];
+ setup_irq(evt->irq, &mct_tick1_event_irq);
+ irq_set_affinity(evt->irq, cpumask_of(1));
}
} else {
- enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
return 0;
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
}
static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
};
#endif /* CONFIG_LOCAL_TIMERS */
-static void __init exynos4_timer_resources(void)
+static void __init exynos4_timer_resources(struct device_node *np)
{
- struct clk *mct_clk;
- mct_clk = clk_get(NULL, "xtal");
+ struct clk *mct_clk, *tick_clk;
+
+ tick_clk = np ? of_clk_get_by_name(np, "fin_pll") :
+ clk_get(NULL, "fin_pll");
+ if (IS_ERR(tick_clk))
+ panic("%s: unable to determine tick clock rate\n", __func__);
+ clk_rate = clk_get_rate(tick_clk);
+
+ mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct");
+ if (IS_ERR(mct_clk))
+ panic("%s: unable to retrieve mct clock instance\n", __func__);
+ clk_prepare_enable(mct_clk);
- clk_rate = clk_get_rate(mct_clk);
+ reg_base = np ? of_iomap(np, 0) : S5P_VA_SYSTIMER;
+ if (!reg_base)
+ panic("%s: unable to ioremap mct address space\n", __func__);
#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
- err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
+ err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- EXYNOS_IRQ_MCT_LOCALTIMER, err);
+ mct_irqs[MCT_L0_IRQ], err);
}
local_timer_register(&exynos4_mct_tick_ops);
#endif /* CONFIG_LOCAL_TIMERS */
}
-void __init exynos4_timer_init(void)
-{
- if (soc_is_exynos5440()) {
- arch_timer_of_register();
- return;
- }
+static const struct of_device_id exynos_mct_ids[] = {
+ { .compatible = "samsung,exynos4210-mct", .data = (void *)MCT_INT_SPI },
+ { .compatible = "samsung,exynos4412-mct", .data = (void *)MCT_INT_PPI },
+};
- if ((soc_is_exynos4210()) || (soc_is_exynos5250()))
+void __init mct_init(void)
+{
+ struct device_node *np = NULL;
+ const struct of_device_id *match;
+ u32 nr_irqs, i;
+
+#ifdef CONFIG_OF
+ np = of_find_matching_node_and_match(NULL, exynos_mct_ids, &match);
+#endif
+ if (np) {
+ mct_int_type = (u32)(match->data);
+
+ /* This driver uses only one global timer interrupt */
+ mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
+
+ /*
+ * Find out the number of local irqs specified. The local
+ * timer irqs are specified after the four global timer
+ * irqs are specified.
+ */
+#ifdef CONFIG_OF
+ nr_irqs = of_irq_count(np);
+#endif
+ for (i = MCT_L0_IRQ; i < nr_irqs; i++)
+ mct_irqs[i] = irq_of_parse_and_map(np, i);
+ } else if (soc_is_exynos4210()) {
+ mct_irqs[MCT_G0_IRQ] = EXYNOS4_IRQ_MCT_G0;
+ mct_irqs[MCT_L0_IRQ] = EXYNOS4_IRQ_MCT_L0;
+ mct_irqs[MCT_L1_IRQ] = EXYNOS4_IRQ_MCT_L1;
mct_int_type = MCT_INT_SPI;
- else
- mct_int_type = MCT_INT_PPI;
+ } else {
+ panic("unable to determine mct controller type\n");
+ }
- exynos4_timer_resources();
+ exynos4_timer_resources(np);
exynos4_clocksource_init();
exynos4_clockevent_init();
}
+CLOCKSOURCE_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init)
+CLOCKSOURCE_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init)
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
/*
* There are 2 versions of the timrot on Freescale MXS-based SoCs.
static struct clock_event_device mxs_clockevent_device;
static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR);
+static void __iomem *mxs_timrot_base;
static u32 timrot_major_version;
static inline void timrot_irq_disable(void)
{
- __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
}
static inline void timrot_irq_enable(void)
{
- __mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
}
static void timrot_irq_acknowledge(void)
{
- __mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ,
- mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+ __raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
+ HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
}
static cycle_t timrotv1_get_cycles(struct clocksource *cs)
return 0;
}
-void __init mxs_timer_init(void)
+static void __init mxs_timer_init(struct device_node *np)
{
- struct device_node *np;
struct clk *timer_clk;
int irq;
- np = of_find_compatible_node(NULL, NULL, "fsl,timrot");
- if (!np) {
- pr_err("%s: failed find timrot node\n", __func__);
- return;
- }
+ mxs_timrot_base = of_iomap(np, 0);
+ WARN_ON(!mxs_timrot_base);
- timer_clk = clk_get_sys("timrot", NULL);
+ timer_clk = of_clk_get(np, 0);
if (IS_ERR(timer_clk)) {
pr_err("%s: failed to get clk\n", __func__);
return;
/*
* Initialize timers to a known state
*/
- mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+ stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
/* get timrot version */
timrot_major_version = __raw_readl(mxs_timrot_base +
- (cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET :
+ (of_device_is_compatible(np, "fsl,imx23-timrot") ?
+ MX23_TIMROT_VERSION_OFFSET :
MX28_TIMROT_VERSION_OFFSET));
timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
irq = irq_of_parse_and_map(np, 0);
setup_irq(irq, &mxs_timer_irq);
}
+CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sunxi_timer.h>
-#include <linux/clk-provider.h>
+#include <linux/clk/sunxi.h>
#define TIMER_CTL_REG 0x00
#define TIMER_CTL_ENABLE (1 << 0)
if (irq <= 0)
panic("Can't parse IRQ");
- of_clk_init(NULL);
+ sunxi_init_clocks();
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
.dev_id = &tegra_clockevent,
};
-static const struct of_device_id timer_match[] __initconst = {
- { .compatible = "nvidia,tegra20-timer" },
- {}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
- { .compatible = "nvidia,tegra20-rtc" },
- {}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
{
- struct device_node *np;
struct clk *clk;
unsigned long rate;
int ret;
- np = of_find_matching_node(NULL, timer_match);
- if (!np) {
- pr_err("Failed to find timer DT node\n");
- BUG();
- }
-
timer_reg_base = of_iomap(np, 0);
if (!timer_reg_base) {
pr_err("Can't map timer registers\n");
BUG();
}
- clk = clk_get_sys("timer", NULL);
+ clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
rate = 12000000;
of_node_put(np);
- np = of_find_matching_node(NULL, rtc_match);
- if (!np) {
- pr_err("Failed to find RTC DT node\n");
- BUG();
- }
-
- rtc_base = of_iomap(np, 0);
- if (!rtc_base) {
- pr_err("Can't map RTC registers");
- BUG();
- }
-
- /*
- * rtc registers are used by read_persistent_clock, keep the rtc clock
- * enabled
- */
- clk = clk_get_sys("rtc-tegra", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get rtc-tegra clock\n");
- else
- clk_prepare_enable(clk);
-
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
tegra_clockevent.irq = tegra_timer_irq.irq;
clockevents_config_and_register(&tegra_clockevent, 1000000,
0x1, 0x1fffffff);
-#ifdef CONFIG_HAVE_ARM_TWD
- twd_local_timer_of_register();
-#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+ struct clk *clk;
+
+ rtc_base = of_iomap(np, 0);
+ if (!rtc_base) {
+ pr_err("Can't map RTC registers");
+ BUG();
+ }
+
+ /*
+ * rtc registers are used by read_persistent_clock, keep the rtc clock
+ * enabled
+ */
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk))
+ pr_warn("Unable to get rtc-tegra clock\n");
+ else
+ clk_prepare_enable(clk);
+
+ of_node_put(np);
+
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
#ifdef CONFIG_PM
static u32 usec_config;
.dev_id = &clockevent,
};
-static struct of_device_id vt8500_timer_ids[] = {
- { .compatible = "via,vt8500-timer" },
- { }
-};
-
-static void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(struct device_node *np)
{
- struct device_node *np;
int timer_irq;
- np = of_find_matching_node(NULL, vt8500_timer_ids);
- if (!np) {
- pr_err("%s: Timer description missing from Device Tree\n",
- __func__);
- return;
- }
regbase = of_iomap(np, 0);
if (!regbase) {
pr_err("%s: Missing iobase description in Device Tree\n",
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
cpumask_copy(policy->cpus, perf->shared_cpu_map);
}
- cpumask_copy(policy->related_cpus, perf->shared_cpu_map);
#ifdef CONFIG_SMP
dmi_check_system(sw_any_bug_dmi_table);
if (check_amd_hwpstate_cpu(cpu) && !acpi_pstate_strict) {
cpumask_clear(policy->cpus);
cpumask_set_cpu(cpu, policy->cpus);
- cpumask_copy(policy->related_cpus, cpu_sibling_mask(cpu));
policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
pr_info_once(PFX "overriding BIOS provided _PSD data\n");
}
{
struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
- if (!cpufreq_frequency_get_table(cpu))
+ if (!policy)
return;
- if (policy && !policy_is_shared(policy)) {
+ if (!cpufreq_frequency_get_table(cpu))
+ goto put_ref;
+
+ if (!policy_is_shared(policy)) {
pr_debug("%s: Free sysfs stat\n", __func__);
sysfs_remove_group(&policy->kobj, &stats_attr_group);
}
- if (policy)
- cpufreq_cpu_put(policy);
+
+put_ref:
+ cpufreq_cpu_put(policy);
}
static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
static int intel_pstate_min_pstate(void)
{
u64 value;
- rdmsrl(0xCE, value);
+ rdmsrl(MSR_PLATFORM_INFO, value);
return (value >> 40) & 0xFF;
}
static int intel_pstate_max_pstate(void)
{
u64 value;
- rdmsrl(0xCE, value);
+ rdmsrl(MSR_PLATFORM_INFO, value);
return (value >> 8) & 0xFF;
}
{
u64 value;
int nont, ret;
- rdmsrl(0x1AD, value);
+ rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value);
nont = intel_pstate_max_pstate();
ret = ((value) & 255);
if (ret <= nont)
sample->idletime_us * 100,
sample->duration_us);
core_pct = div64_u64(sample->aperf * 100, sample->mperf);
- sample->freq = cpu->pstate.turbo_pstate * core_pct * 1000;
+ sample->freq = cpu->pstate.max_pstate * core_pct * 1000;
sample->core_pct_busy = div_s64((sample->pstate_pct_busy * core_pct),
100);
static int __initdata no_load;
+static int intel_pstate_msrs_not_valid(void)
+{
+ /* Check that all the msr's we are using are valid. */
+ u64 aperf, mperf, tmp;
+
+ rdmsrl(MSR_IA32_APERF, aperf);
+ rdmsrl(MSR_IA32_MPERF, mperf);
+
+ if (!intel_pstate_min_pstate() ||
+ !intel_pstate_max_pstate() ||
+ !intel_pstate_turbo_pstate())
+ return -ENODEV;
+
+ rdmsrl(MSR_IA32_APERF, tmp);
+ if (!(tmp - aperf))
+ return -ENODEV;
+
+ rdmsrl(MSR_IA32_MPERF, tmp);
+ if (!(tmp - mperf))
+ return -ENODEV;
+
+ return 0;
+}
static int __init intel_pstate_init(void)
{
int cpu, rc = 0;
if (!id)
return -ENODEV;
+ if (intel_pstate_msrs_not_valid())
+ return -ENODEV;
+
pr_info("Intel P-state driver initializing.\n");
all_cpu_data = vmalloc(sizeof(void *) * num_possible_cpus());
};
static struct caam_alg_template driver_algs[] = {
- /*
- * single-pass ipsec_esp descriptor
- * authencesn(*,*) is also registered, although not present
- * explicitly here.
- */
+ /* single-pass ipsec_esp descriptor */
{
.name = "authenc(hmac(md5),cbc(aes))",
.driver_name = "authenc-hmac-md5-cbc-aes-caam",
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
/* TODO: check if h/w supports alg */
struct caam_crypto_alg *t_alg;
- bool done = false;
-authencesn:
t_alg = caam_alg_alloc(ctrldev, &driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
dev_warn(ctrldev, "%s alg registration failed\n",
t_alg->crypto_alg.cra_driver_name);
kfree(t_alg);
- } else {
+ } else
list_add_tail(&t_alg->entry, &priv->alg_list);
- if (driver_algs[i].type == CRYPTO_ALG_TYPE_AEAD &&
- !memcmp(driver_algs[i].name, "authenc", 7) &&
- !done) {
- char *name;
-
- name = driver_algs[i].name;
- memmove(name + 10, name + 7, strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- name = driver_algs[i].driver_name;
- memmove(name + 10, name + 7, strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- done = true;
- goto authencesn;
- }
- }
}
if (!list_empty(&priv->alg_list))
dev_info(ctrldev, "%s algorithms registered in /proc/crypto\n",
#include <linux/types.h>
#include <linux/debugfs.h>
#include <linux/circ_buf.h>
-#include <linux/string.h>
#include <net/xfrm.h>
#include <crypto/algapi.h>
#include <linux/spinlock.h>
#include <linux/rtnetlink.h>
#include <linux/slab.h>
-#include <linux/string.h>
#include <crypto/algapi.h>
#include <crypto/aes.h>
};
static struct talitos_alg_template driver_algs[] = {
- /*
- * AEAD algorithms. These use a single-pass ipsec_esp descriptor.
- * authencesn(*,*) is also registered, although not present
- * explicitly here.
- */
+ /* AEAD algorithms. These use a single-pass ipsec_esp descriptor */
{ .type = CRYPTO_ALG_TYPE_AEAD,
.alg.crypto = {
.cra_name = "authenc(hmac(sha1),cbc(aes))",
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
char *name = NULL;
- bool authenc = false;
-authencesn:
t_alg = talitos_alg_alloc(dev, &driver_algs[i]);
if (IS_ERR(t_alg)) {
err = PTR_ERR(t_alg);
err = crypto_register_alg(
&t_alg->algt.alg.crypto);
name = t_alg->algt.alg.crypto.cra_driver_name;
- authenc = authenc ? !authenc :
- !(bool)memcmp(name, "authenc", 7);
break;
case CRYPTO_ALG_TYPE_AHASH:
err = crypto_register_ahash(
dev_err(dev, "%s alg registration failed\n",
name);
kfree(t_alg);
- } else {
+ } else
list_add_tail(&t_alg->entry, &priv->alg_list);
- if (authenc) {
- struct crypto_alg *alg =
- &driver_algs[i].alg.crypto;
-
- name = alg->cra_name;
- memmove(name + 10, name + 7,
- strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- name = alg->cra_driver_name;
- memmove(name + 10, name + 7,
- strlen(name) - 7);
- memcpy(name + 7, "esn", 3);
-
- goto authencesn;
- }
- }
}
}
if (!list_empty(&priv->alg_list))
*maxburst = 0;
}
+static inline void convert_slave_id(struct dw_dma_chan *dwc)
+{
+ struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+
+ dwc->dma_sconfig.slave_id -= dw->request_line_base;
+}
+
static int
set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
{
convert_burst(&dwc->dma_sconfig.src_maxburst);
convert_burst(&dwc->dma_sconfig.dst_maxburst);
+ convert_slave_id(dwc);
return 0;
}
if (dma_spec->args_count != 3)
return NULL;
- fargs.req = be32_to_cpup(dma_spec->args+0);
- fargs.src = be32_to_cpup(dma_spec->args+1);
- fargs.dst = be32_to_cpup(dma_spec->args+2);
+ fargs.req = dma_spec->args[0];
+ fargs.src = dma_spec->args[1];
+ fargs.dst = dma_spec->args[2];
if (WARN_ON(fargs.req >= DW_DMA_MAX_NR_REQUESTS ||
fargs.src >= dw->nr_masters ||
static int dw_probe(struct platform_device *pdev)
{
+ const struct platform_device_id *match;
struct dw_dma_platform_data *pdata;
struct resource *io;
struct dw_dma *dw;
memcpy(dw->data_width, pdata->data_width, 4);
}
+ /* Get the base request line if set */
+ match = platform_get_device_id(pdev);
+ if (match)
+ dw->request_line_base = (unsigned int)match->driver_data;
+
/* Calculate all channel mask before DMA setup */
dw->all_chan_mask = (1 << nr_channels) - 1;
#endif
static const struct platform_device_id dw_dma_ids[] = {
- { "INTL9C60", 0 },
+ /* Name, Request Line Base */
+ { "INTL9C60", (kernel_ulong_t)16 },
{ }
};
/* hardware configuration */
unsigned char nr_masters;
unsigned char data_width[4];
+ unsigned int request_line_base;
struct dw_dma_chan chan[0];
};
#include <linux/stmp_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_dma.h>
#include <asm/irq.h>
struct dma_device dma_device;
struct device_dma_parameters dma_parms;
struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
+ struct platform_device *pdev;
+ unsigned int nr_channels;
};
struct mxs_dma_type {
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int ret;
- if (!data)
- return -EINVAL;
-
- mxs_chan->chan_irq = data->chan_irq;
+ if (data)
+ mxs_chan->chan_irq = data->chan_irq;
mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev,
CCW_BLOCK_SIZE, &mxs_chan->ccw_phys,
return ret;
}
+struct mxs_dma_filter_param {
+ struct device_node *of_node;
+ unsigned int chan_id;
+};
+
+static bool mxs_dma_filter_fn(struct dma_chan *chan, void *fn_param)
+{
+ struct mxs_dma_filter_param *param = fn_param;
+ struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
+ struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+ int chan_irq;
+
+ if (mxs_dma->dma_device.dev->of_node != param->of_node)
+ return false;
+
+ if (chan->chan_id != param->chan_id)
+ return false;
+
+ chan_irq = platform_get_irq(mxs_dma->pdev, param->chan_id);
+ if (chan_irq < 0)
+ return false;
+
+ mxs_chan->chan_irq = chan_irq;
+
+ return true;
+}
+
+struct dma_chan *mxs_dma_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct mxs_dma_engine *mxs_dma = ofdma->of_dma_data;
+ dma_cap_mask_t mask = mxs_dma->dma_device.cap_mask;
+ struct mxs_dma_filter_param param;
+
+ if (dma_spec->args_count != 1)
+ return NULL;
+
+ param.of_node = ofdma->of_node;
+ param.chan_id = dma_spec->args[0];
+
+ if (param.chan_id >= mxs_dma->nr_channels)
+ return NULL;
+
+ return dma_request_channel(mask, mxs_dma_filter_fn, ¶m);
+}
+
static int __init mxs_dma_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
const struct platform_device_id *id_entry;
const struct of_device_id *of_id;
const struct mxs_dma_type *dma_type;
struct resource *iores;
int ret, i;
- mxs_dma = kzalloc(sizeof(*mxs_dma), GFP_KERNEL);
+ mxs_dma = devm_kzalloc(&pdev->dev, sizeof(*mxs_dma), GFP_KERNEL);
if (!mxs_dma)
return -ENOMEM;
+ ret = of_property_read_u32(np, "dma-channels", &mxs_dma->nr_channels);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read dma-channels\n");
+ return ret;
+ }
+
of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev);
if (of_id)
id_entry = of_id->data;
mxs_dma->dev_id = dma_type->id;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mxs_dma->base = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(mxs_dma->base))
+ return PTR_ERR(mxs_dma->base);
- if (!request_mem_region(iores->start, resource_size(iores),
- pdev->name)) {
- ret = -EBUSY;
- goto err_request_region;
- }
-
- mxs_dma->base = ioremap(iores->start, resource_size(iores));
- if (!mxs_dma->base) {
- ret = -ENOMEM;
- goto err_ioremap;
- }
-
- mxs_dma->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(mxs_dma->clk)) {
- ret = PTR_ERR(mxs_dma->clk);
- goto err_clk;
- }
+ mxs_dma->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mxs_dma->clk))
+ return PTR_ERR(mxs_dma->clk);
dma_cap_set(DMA_SLAVE, mxs_dma->dma_device.cap_mask);
dma_cap_set(DMA_CYCLIC, mxs_dma->dma_device.cap_mask);
ret = mxs_dma_init(mxs_dma);
if (ret)
- goto err_init;
+ return ret;
+ mxs_dma->pdev = pdev;
mxs_dma->dma_device.dev = &pdev->dev;
/* mxs_dma gets 65535 bytes maximum sg size */
ret = dma_async_device_register(&mxs_dma->dma_device);
if (ret) {
dev_err(mxs_dma->dma_device.dev, "unable to register\n");
- goto err_init;
+ return ret;
+ }
+
+ ret = of_dma_controller_register(np, mxs_dma_xlate, mxs_dma);
+ if (ret) {
+ dev_err(mxs_dma->dma_device.dev,
+ "failed to register controller\n");
+ dma_async_device_unregister(&mxs_dma->dma_device);
}
dev_info(mxs_dma->dma_device.dev, "initialized\n");
return 0;
-
-err_init:
- clk_put(mxs_dma->clk);
-err_clk:
- iounmap(mxs_dma->base);
-err_ioremap:
- release_mem_region(iores->start, resource_size(iores));
-err_request_region:
- kfree(mxs_dma);
- return ret;
}
static struct platform_driver mxs_dma_driver = {
#define DEV_NAME "max77693-muic"
#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */
+/*
+ * Default value of MAX77693 register to bring up MUIC device.
+ * If user don't set some initial value for MUIC device through platform data,
+ * extcon-max77693 driver use 'default_init_data' to bring up base operation
+ * of MAX77693 MUIC device.
+ */
+struct max77693_reg_data default_init_data[] = {
+ {
+ /* STATUS2 - [3]ChgDetRun */
+ .addr = MAX77693_MUIC_REG_STATUS2,
+ .data = STATUS2_CHGDETRUN_MASK,
+ }, {
+ /* INTMASK1 - Unmask [3]ADC1KM,[0]ADCM */
+ .addr = MAX77693_MUIC_REG_INTMASK1,
+ .data = INTMASK1_ADC1K_MASK
+ | INTMASK1_ADC_MASK,
+ }, {
+ /* INTMASK2 - Unmask [0]ChgTypM */
+ .addr = MAX77693_MUIC_REG_INTMASK2,
+ .data = INTMASK2_CHGTYP_MASK,
+ }, {
+ /* INTMASK3 - Mask all of interrupts */
+ .addr = MAX77693_MUIC_REG_INTMASK3,
+ .data = 0x0,
+ }, {
+ /* CDETCTRL2 */
+ .addr = MAX77693_MUIC_REG_CDETCTRL2,
+ .data = CDETCTRL2_VIDRMEN_MASK
+ | CDETCTRL2_DXOVPEN_MASK,
+ },
+};
+
enum max77693_muic_adc_debounce_time {
ADC_DEBOUNCE_TIME_5MS = 0,
ADC_DEBOUNCE_TIME_10MS,
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
- struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
struct max77693_muic_info *info;
+ struct max77693_reg_data *init_data;
+ int num_init_data;
int delay_jiffies;
int ret;
int i;
goto err_irq;
}
- /* Initialize MUIC register by using platform data */
- for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
- enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+
+ /* Initialize MUIC register by using platform data or default data */
+ if (pdata->muic_data) {
+ init_data = pdata->muic_data->init_data;
+ num_init_data = pdata->muic_data->num_init_data;
+ } else {
+ init_data = default_init_data;
+ num_init_data = ARRAY_SIZE(default_init_data);
+ }
+
+ for (i = 0 ; i < num_init_data ; i++) {
+ enum max77693_irq_source irq_src
+ = MAX77693_IRQ_GROUP_NR;
max77693_write_reg(info->max77693->regmap_muic,
- muic_pdata->init_data[i].addr,
- muic_pdata->init_data[i].data);
+ init_data[i].addr,
+ init_data[i].data);
- switch (muic_pdata->init_data[i].addr) {
+ switch (init_data[i].addr) {
case MAX77693_MUIC_REG_INTMASK1:
irq_src = MUIC_INT1;
break;
if (irq_src < MAX77693_IRQ_GROUP_NR)
info->max77693->irq_masks_cur[irq_src]
- = muic_pdata->init_data[i].data;
+ = init_data[i].data;
}
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (muic_pdata->path_uart)
- info->path_uart = muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ if (pdata->muic_data) {
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
- if (muic_pdata->path_usb)
- info->path_usb = muic_pdata->path_usb;
- else
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
+
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
+
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
info->path_usb = CONTROL1_SW_USB;
+ info->path_uart = CONTROL1_SW_UART;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max77693_muic_set_path(info, info->path_uart, true);
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq);
- if (muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return ret;
goto err_irq;
}
- /* Initialize registers according to platform data */
if (pdata->muic_pdata) {
- struct max8997_muic_platform_data *mdata = info->muic_pdata;
-
- for (i = 0; i < mdata->num_init_data; i++) {
- max8997_write_reg(info->muic, mdata->init_data[i].addr,
- mdata->init_data[i].data);
+ struct max8997_muic_platform_data *muic_pdata
+ = pdata->muic_pdata;
+
+ /* Initialize registers according to platform data */
+ for (i = 0; i < muic_pdata->num_init_data; i++) {
+ max8997_write_reg(info->muic,
+ muic_pdata->init_data[i].addr,
+ muic_pdata->init_data[i].data);
}
- }
- /*
- * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
- * h/w path of COMP2/COMN1 on CONTROL1 register.
- */
- if (pdata->muic_pdata->path_uart)
- info->path_uart = pdata->muic_pdata->path_uart;
- else
- info->path_uart = CONTROL1_SW_UART;
+ /*
+ * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+ * h/w path of COMP2/COMN1 on CONTROL1 register.
+ */
+ if (muic_pdata->path_uart)
+ info->path_uart = muic_pdata->path_uart;
+ else
+ info->path_uart = CONTROL1_SW_UART;
- if (pdata->muic_pdata->path_usb)
- info->path_usb = pdata->muic_pdata->path_usb;
- else
+ if (muic_pdata->path_usb)
+ info->path_usb = muic_pdata->path_usb;
+ else
+ info->path_usb = CONTROL1_SW_USB;
+
+ /*
+ * Default delay time for detecting cable state
+ * after certain time.
+ */
+ if (muic_pdata->detcable_delay_ms)
+ delay_jiffies =
+ msecs_to_jiffies(muic_pdata->detcable_delay_ms);
+ else
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ } else {
+ info->path_uart = CONTROL1_SW_UART;
info->path_usb = CONTROL1_SW_USB;
+ delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
+ }
/* Set initial path for UART */
max8997_muic_set_path(info, info->path_uart, true);
* driver should notify cable state to upper layer.
*/
INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq);
- if (pdata->muic_pdata->detcable_delay_ms)
- delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms);
- else
- delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT);
schedule_delayed_work(&info->wq_detcable, delay_jiffies);
return 0;
Subsequent efibootmgr releases may be found at:
<http://linux.dell.com/efibootmgr>
+config EFI_VARS_PSTORE
+ bool "Register efivars backend for pstore"
+ depends on EFI_VARS && PSTORE
+ default y
+ help
+ Say Y here to enable use efivars as a backend to pstore. This
+ will allow writing console messages, crash dumps, or anything
+ else supported by pstore to EFI variables.
+
+config EFI_VARS_PSTORE_DEFAULT_DISABLE
+ bool "Disable using efivars as a pstore backend by default"
+ depends on EFI_VARS_PSTORE
+ default n
+ help
+ Saying Y here will disable the use of efivars as a storage
+ backend for pstore by default. This setting can be overridden
+ using the efivars module's pstore_disable parameter.
+
config EFI_PCDP
bool "Console device selection via EFI PCDP or HCDP table"
depends on ACPI && EFI && IA64
*/
#define GUID_LEN 36
+static bool efivars_pstore_disable =
+ IS_ENABLED(CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE);
+
+module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644);
+
/*
* The maximum size of VariableName + Data = 1024
* Therefore, it's reasonable to save that much
static void efivar_update_sysfs_entries(struct work_struct *);
static DECLARE_WORK(efivar_work, efivar_update_sysfs_entries);
+static bool efivar_wq_enabled = true;
/* Return the number of unicode characters in data */
static unsigned long
.create = efivarfs_create,
};
-static struct pstore_info efi_pstore_info;
-
-#ifdef CONFIG_PSTORE
+#ifdef CONFIG_EFI_VARS_PSTORE
static int efi_pstore_open(struct pstore_info *psi)
{
spin_unlock_irqrestore(&efivars->lock, flags);
- if (reason == KMSG_DUMP_OOPS)
+ if (reason == KMSG_DUMP_OOPS && efivar_wq_enabled)
schedule_work(&efivar_work);
*id = part;
return 0;
}
-#else
-static int efi_pstore_open(struct pstore_info *psi)
-{
- return 0;
-}
-
-static int efi_pstore_close(struct pstore_info *psi)
-{
- return 0;
-}
-
-static ssize_t efi_pstore_read(u64 *id, enum pstore_type_id *type, int *count,
- struct timespec *timespec,
- char **buf, struct pstore_info *psi)
-{
- return -1;
-}
-
-static int efi_pstore_write(enum pstore_type_id type,
- enum kmsg_dump_reason reason, u64 *id,
- unsigned int part, int count, size_t size,
- struct pstore_info *psi)
-{
- return 0;
-}
-
-static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count,
- struct timespec time, struct pstore_info *psi)
-{
- return 0;
-}
-#endif
static struct pstore_info efi_pstore_info = {
.owner = THIS_MODULE,
.erase = efi_pstore_erase,
};
+static void efivar_pstore_register(struct efivars *efivars)
+{
+ efivars->efi_pstore_info = efi_pstore_info;
+ efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
+ if (efivars->efi_pstore_info.buf) {
+ efivars->efi_pstore_info.bufsize = 1024;
+ efivars->efi_pstore_info.data = efivars;
+ spin_lock_init(&efivars->efi_pstore_info.buf_lock);
+ pstore_register(&efivars->efi_pstore_info);
+ }
+}
+#else
+static void efivar_pstore_register(struct efivars *efivars)
+{
+ return;
+}
+#endif
+
static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t pos, size_t count)
return found;
}
+/*
+ * Returns the size of variable_name, in bytes, including the
+ * terminating NULL character, or variable_name_size if no NULL
+ * character is found among the first variable_name_size bytes.
+ */
+static unsigned long var_name_strnsize(efi_char16_t *variable_name,
+ unsigned long variable_name_size)
+{
+ unsigned long len;
+ efi_char16_t c;
+
+ /*
+ * The variable name is, by definition, a NULL-terminated
+ * string, so make absolutely sure that variable_name_size is
+ * the value we expect it to be. If not, return the real size.
+ */
+ for (len = 2; len <= variable_name_size; len += sizeof(c)) {
+ c = variable_name[(len / sizeof(c)) - 1];
+ if (!c)
+ break;
+ }
+
+ return min(len, variable_name_size);
+}
+
static void efivar_update_sysfs_entries(struct work_struct *work)
{
struct efivars *efivars = &__efivars;
if (!found) {
kfree(variable_name);
break;
- } else
+ } else {
+ variable_name_size = var_name_strnsize(variable_name,
+ variable_name_size);
efivar_create_sysfs_entry(efivars,
variable_name_size,
variable_name, &vendor);
+ }
}
}
}
EXPORT_SYMBOL_GPL(unregister_efivars);
+/*
+ * Print a warning when duplicate EFI variables are encountered and
+ * disable the sysfs workqueue since the firmware is buggy.
+ */
+static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,
+ unsigned long len16)
+{
+ size_t i, len8 = len16 / sizeof(efi_char16_t);
+ char *s8;
+
+ /*
+ * Disable the workqueue since the algorithm it uses for
+ * detecting new variables won't work with this buggy
+ * implementation of GetNextVariableName().
+ */
+ efivar_wq_enabled = false;
+
+ s8 = kzalloc(len8, GFP_KERNEL);
+ if (!s8)
+ return;
+
+ for (i = 0; i < len8; i++)
+ s8[i] = s16[i];
+
+ printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
+ s8, vendor_guid);
+ kfree(s8);
+}
+
int register_efivars(struct efivars *efivars,
const struct efivar_operations *ops,
struct kobject *parent_kobj)
&vendor_guid);
switch (status) {
case EFI_SUCCESS:
+ variable_name_size = var_name_strnsize(variable_name,
+ variable_name_size);
+
+ /*
+ * Some firmware implementations return the
+ * same variable name on multiple calls to
+ * get_next_variable(). Terminate the loop
+ * immediately as there is no guarantee that
+ * we'll ever see a different variable name,
+ * and may end up looping here forever.
+ */
+ if (variable_is_present(variable_name, &vendor_guid)) {
+ dup_variable_bug(variable_name, &vendor_guid,
+ variable_name_size);
+ status = EFI_NOT_FOUND;
+ break;
+ }
+
efivar_create_sysfs_entry(efivars,
variable_name_size,
variable_name,
if (error)
unregister_efivars(efivars);
- efivars->efi_pstore_info = efi_pstore_info;
-
- efivars->efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
- if (efivars->efi_pstore_info.buf) {
- efivars->efi_pstore_info.bufsize = 1024;
- efivars->efi_pstore_info.data = efivars;
- spin_lock_init(&efivars->efi_pstore_info.buf_lock);
- pstore_register(&efivars->efi_pstore_info);
- }
+ if (!efivars_pstore_disable)
+ efivar_pstore_register(efivars);
register_filesystem(&efivarfs_type);
u32 oe[4];
u32 int_enb[4];
u32 int_lvl[4];
+ u32 wake_enb[4];
#endif
};
bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
+
+ /* Enable gpio irq for wake up source */
+ tegra_gpio_writel(bank->wake_enb[p],
+ GPIO_INT_ENB(gpio));
}
}
local_irq_restore(flags);
return 0;
}
-static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable)
+static int tegra_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
{
struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ int gpio = d->hwirq;
+ u32 port, bit, mask;
+
+ port = GPIO_PORT(gpio);
+ bit = GPIO_BIT(gpio);
+ mask = BIT(bit);
+
+ if (enable)
+ bank->wake_enb[port] |= mask;
+ else
+ bank->wake_enb[port] &= ~mask;
+
return irq_set_irq_wake(bank->irq, enable);
}
#endif
.irq_unmask = tegra_gpio_irq_unmask,
.irq_set_type = tegra_gpio_irq_set_type,
#ifdef CONFIG_PM_SLEEP
- .irq_set_wake = tegra_gpio_wake_enable,
+ .irq_set_wake = tegra_gpio_irq_set_wake,
#endif
};
if (!np)
return;
- do {
+ for (;; index++) {
ret = of_parse_phandle_with_args(np, "gpio-ranges",
"#gpio-range-cells", index, &pinspec);
if (ret)
if (ret)
break;
-
- } while (index++);
+ }
}
#else
/* position control register for hardware window 0, 2 ~ 4.*/
#define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
#define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
-/* size control register for hardware window 0. */
-#define VIDOSD_C_SIZE_W0 (VIDOSD_BASE + 0x08)
-/* alpha control register for hardware window 1 ~ 4. */
-#define VIDOSD_C(win) (VIDOSD_BASE + 0x18 + (win) * 16)
-/* size control register for hardware window 1 ~ 4. */
+/*
+ * size control register for hardware windows 0 and alpha control register
+ * for hardware windows 1 ~ 4
+ */
+#define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16)
+/* size control register for hardware windows 1 ~ 2. */
#define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
#define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
#define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
/* color key control register for hardware window 1 ~ 4. */
-#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + (x * 8))
+#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8))
/* color key value register for hardware window 1 ~ 4. */
-#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + (x * 8))
+#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8))
/* FIMD has totally five hardware windows. */
#define WINDOWS_NR 5
#ifdef CONFIG_OF
static const struct of_device_id fimd_driver_dt_match[] = {
- { .compatible = "samsung,exynos4-fimd",
+ { .compatible = "samsung,exynos4210-fimd",
.data = &exynos4_fimd_driver_data },
- { .compatible = "samsung,exynos5-fimd",
+ { .compatible = "samsung,exynos5250-fimd",
.data = &exynos5_fimd_driver_data },
{},
};
if (win != 3 && win != 4) {
u32 offset = VIDOSD_D(win);
if (win == 0)
- offset = VIDOSD_C_SIZE_W0;
+ offset = VIDOSD_C(win);
val = win_data->ovl_width * win_data->ovl_height;
writel(val, ctx->regs + offset);
/* registers for base address */
#define G2D_SRC_BASE_ADDR 0x0304
+#define G2D_SRC_COLOR_MODE 0x030C
+#define G2D_SRC_LEFT_TOP 0x0310
+#define G2D_SRC_RIGHT_BOTTOM 0x0314
#define G2D_SRC_PLANE2_BASE_ADDR 0x0318
#define G2D_DST_BASE_ADDR 0x0404
+#define G2D_DST_COLOR_MODE 0x040C
+#define G2D_DST_LEFT_TOP 0x0410
+#define G2D_DST_RIGHT_BOTTOM 0x0414
#define G2D_DST_PLANE2_BASE_ADDR 0x0418
#define G2D_PAT_BASE_ADDR 0x0500
#define G2D_MSK_BASE_ADDR 0x0520
#define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
/* G2D_DMA_HOLD_CMD */
-#define G2D_USET_HOLD (1 << 2)
+#define G2D_USER_HOLD (1 << 2)
#define G2D_LIST_HOLD (1 << 1)
#define G2D_BITBLT_HOLD (1 << 0)
#define G2D_START_NHOLT (1 << 1)
#define G2D_START_BITBLT (1 << 0)
+/* buffer color format */
+#define G2D_FMT_XRGB8888 0
+#define G2D_FMT_ARGB8888 1
+#define G2D_FMT_RGB565 2
+#define G2D_FMT_XRGB1555 3
+#define G2D_FMT_ARGB1555 4
+#define G2D_FMT_XRGB4444 5
+#define G2D_FMT_ARGB4444 6
+#define G2D_FMT_PACKED_RGB888 7
+#define G2D_FMT_A8 11
+#define G2D_FMT_L8 12
+
+/* buffer valid length */
+#define G2D_LEN_MIN 1
+#define G2D_LEN_MAX 8000
+
#define G2D_CMDLIST_SIZE (PAGE_SIZE / 4)
#define G2D_CMDLIST_NUM 64
#define G2D_CMDLIST_POOL_SIZE (G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM)
#define G2D_CMDLIST_DATA_NUM (G2D_CMDLIST_SIZE / sizeof(u32) - 2)
-#define MAX_BUF_ADDR_NR 6
-
/* maximum buffer pool size of userptr is 64MB as default */
#define MAX_POOL (64 * 1024 * 1024)
BUF_TYPE_USERPTR,
};
+enum g2d_reg_type {
+ REG_TYPE_NONE = -1,
+ REG_TYPE_SRC,
+ REG_TYPE_SRC_PLANE2,
+ REG_TYPE_DST,
+ REG_TYPE_DST_PLANE2,
+ REG_TYPE_PAT,
+ REG_TYPE_MSK,
+ MAX_REG_TYPE_NR
+};
+
/* cmdlist data structure */
struct g2d_cmdlist {
u32 head;
u32 last; /* last data offset */
};
+/*
+ * A structure of buffer description
+ *
+ * @format: color format
+ * @left_x: the x coordinates of left top corner
+ * @top_y: the y coordinates of left top corner
+ * @right_x: the x coordinates of right bottom corner
+ * @bottom_y: the y coordinates of right bottom corner
+ *
+ */
+struct g2d_buf_desc {
+ unsigned int format;
+ unsigned int left_x;
+ unsigned int top_y;
+ unsigned int right_x;
+ unsigned int bottom_y;
+};
+
+/*
+ * A structure of buffer information
+ *
+ * @map_nr: manages the number of mapped buffers
+ * @reg_types: stores regitster type in the order of requested command
+ * @handles: stores buffer handle in its reg_type position
+ * @types: stores buffer type in its reg_type position
+ * @descs: stores buffer description in its reg_type position
+ *
+ */
+struct g2d_buf_info {
+ unsigned int map_nr;
+ enum g2d_reg_type reg_types[MAX_REG_TYPE_NR];
+ unsigned long handles[MAX_REG_TYPE_NR];
+ unsigned int types[MAX_REG_TYPE_NR];
+ struct g2d_buf_desc descs[MAX_REG_TYPE_NR];
+};
+
struct drm_exynos_pending_g2d_event {
struct drm_pending_event base;
struct drm_exynos_g2d_event event;
bool in_pool;
bool out_of_list;
};
-
struct g2d_cmdlist_node {
struct list_head list;
struct g2d_cmdlist *cmdlist;
- unsigned int map_nr;
- unsigned long handles[MAX_BUF_ADDR_NR];
- unsigned int obj_type[MAX_BUF_ADDR_NR];
dma_addr_t dma_addr;
+ struct g2d_buf_info buf_info;
struct drm_exynos_pending_g2d_event *event;
};
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
int nr;
int ret;
+ struct g2d_buf_info *buf_info;
init_dma_attrs(&g2d->cmdlist_dma_attrs);
dma_set_attr(DMA_ATTR_WRITE_COMBINE, &g2d->cmdlist_dma_attrs);
}
for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) {
+ unsigned int i;
+
node[nr].cmdlist =
g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE;
node[nr].dma_addr =
g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE;
+ buf_info = &node[nr].buf_info;
+ for (i = 0; i < MAX_REG_TYPE_NR; i++)
+ buf_info->reg_types[i] = REG_TYPE_NONE;
+
list_add_tail(&node[nr].list, &g2d->free_cmdlist);
}
DMA_BIDIRECTIONAL);
if (ret < 0) {
DRM_ERROR("failed to map sgt with dma region.\n");
- goto err_free_sgt;
+ goto err_sg_free_table;
}
g2d_userptr->dma_addr = sgt->sgl[0].dma_address;
return &g2d_userptr->dma_addr;
-err_free_sgt:
+err_sg_free_table:
sg_free_table(sgt);
+
+err_free_sgt:
kfree(sgt);
sgt = NULL;
g2d->current_pool = 0;
}
+static enum g2d_reg_type g2d_get_reg_type(int reg_offset)
+{
+ enum g2d_reg_type reg_type;
+
+ switch (reg_offset) {
+ case G2D_SRC_BASE_ADDR:
+ case G2D_SRC_COLOR_MODE:
+ case G2D_SRC_LEFT_TOP:
+ case G2D_SRC_RIGHT_BOTTOM:
+ reg_type = REG_TYPE_SRC;
+ break;
+ case G2D_SRC_PLANE2_BASE_ADDR:
+ reg_type = REG_TYPE_SRC_PLANE2;
+ break;
+ case G2D_DST_BASE_ADDR:
+ case G2D_DST_COLOR_MODE:
+ case G2D_DST_LEFT_TOP:
+ case G2D_DST_RIGHT_BOTTOM:
+ reg_type = REG_TYPE_DST;
+ break;
+ case G2D_DST_PLANE2_BASE_ADDR:
+ reg_type = REG_TYPE_DST_PLANE2;
+ break;
+ case G2D_PAT_BASE_ADDR:
+ reg_type = REG_TYPE_PAT;
+ break;
+ case G2D_MSK_BASE_ADDR:
+ reg_type = REG_TYPE_MSK;
+ break;
+ default:
+ reg_type = REG_TYPE_NONE;
+ DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
+ break;
+ };
+
+ return reg_type;
+}
+
+static unsigned long g2d_get_buf_bpp(unsigned int format)
+{
+ unsigned long bpp;
+
+ switch (format) {
+ case G2D_FMT_XRGB8888:
+ case G2D_FMT_ARGB8888:
+ bpp = 4;
+ break;
+ case G2D_FMT_RGB565:
+ case G2D_FMT_XRGB1555:
+ case G2D_FMT_ARGB1555:
+ case G2D_FMT_XRGB4444:
+ case G2D_FMT_ARGB4444:
+ bpp = 2;
+ break;
+ case G2D_FMT_PACKED_RGB888:
+ bpp = 3;
+ break;
+ default:
+ bpp = 1;
+ break;
+ }
+
+ return bpp;
+}
+
+static bool g2d_check_buf_desc_is_valid(struct g2d_buf_desc *buf_desc,
+ enum g2d_reg_type reg_type,
+ unsigned long size)
+{
+ unsigned int width, height;
+ unsigned long area;
+
+ /*
+ * check source and destination buffers only.
+ * so the others are always valid.
+ */
+ if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
+ return true;
+
+ width = buf_desc->right_x - buf_desc->left_x;
+ if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
+ DRM_ERROR("width[%u] is out of range!\n", width);
+ return false;
+ }
+
+ height = buf_desc->bottom_y - buf_desc->top_y;
+ if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
+ DRM_ERROR("height[%u] is out of range!\n", height);
+ return false;
+ }
+
+ area = (unsigned long)width * (unsigned long)height *
+ g2d_get_buf_bpp(buf_desc->format);
+ if (area > size) {
+ DRM_ERROR("area[%lu] is out of range[%lu]!\n", area, size);
+ return false;
+ }
+
+ return true;
+}
+
static int g2d_map_cmdlist_gem(struct g2d_data *g2d,
struct g2d_cmdlist_node *node,
struct drm_device *drm_dev,
struct drm_file *file)
{
struct g2d_cmdlist *cmdlist = node->cmdlist;
+ struct g2d_buf_info *buf_info = &node->buf_info;
int offset;
+ int ret;
int i;
- for (i = 0; i < node->map_nr; i++) {
+ for (i = 0; i < buf_info->map_nr; i++) {
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ int reg_pos;
unsigned long handle;
dma_addr_t *addr;
- offset = cmdlist->last - (i * 2 + 1);
- handle = cmdlist->data[offset];
+ reg_pos = cmdlist->last - 2 * (i + 1);
+
+ offset = cmdlist->data[reg_pos];
+ handle = cmdlist->data[reg_pos + 1];
+
+ reg_type = g2d_get_reg_type(offset);
+ if (reg_type == REG_TYPE_NONE) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ buf_desc = &buf_info->descs[reg_type];
+
+ if (buf_info->types[reg_type] == BUF_TYPE_GEM) {
+ unsigned long size;
+
+ size = exynos_drm_gem_get_size(drm_dev, handle, file);
+ if (!size) {
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
+ size)) {
+ ret = -EFAULT;
+ goto err;
+ }
- if (node->obj_type[i] == BUF_TYPE_GEM) {
addr = exynos_drm_gem_get_dma_addr(drm_dev, handle,
file);
if (IS_ERR(addr)) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
}
} else {
struct drm_exynos_g2d_userptr g2d_userptr;
if (copy_from_user(&g2d_userptr, (void __user *)handle,
sizeof(struct drm_exynos_g2d_userptr))) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
+ }
+
+ if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
+ g2d_userptr.size)) {
+ ret = -EFAULT;
+ goto err;
}
addr = g2d_userptr_get_dma_addr(drm_dev,
file,
&handle);
if (IS_ERR(addr)) {
- node->map_nr = i;
- return -EFAULT;
+ ret = -EFAULT;
+ goto err;
}
}
- cmdlist->data[offset] = *addr;
- node->handles[i] = handle;
+ cmdlist->data[reg_pos + 1] = *addr;
+ buf_info->reg_types[i] = reg_type;
+ buf_info->handles[reg_type] = handle;
}
return 0;
+
+err:
+ buf_info->map_nr = i;
+ return ret;
}
static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d,
struct drm_file *filp)
{
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
+ struct g2d_buf_info *buf_info = &node->buf_info;
int i;
- for (i = 0; i < node->map_nr; i++) {
- unsigned long handle = node->handles[i];
+ for (i = 0; i < buf_info->map_nr; i++) {
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ unsigned long handle;
+
+ reg_type = buf_info->reg_types[i];
+
+ buf_desc = &buf_info->descs[reg_type];
+ handle = buf_info->handles[reg_type];
- if (node->obj_type[i] == BUF_TYPE_GEM)
+ if (buf_info->types[reg_type] == BUF_TYPE_GEM)
exynos_drm_gem_put_dma_addr(subdrv->drm_dev, handle,
filp);
else
g2d_userptr_put_dma_addr(subdrv->drm_dev, handle,
false);
- node->handles[i] = 0;
+ buf_info->reg_types[i] = REG_TYPE_NONE;
+ buf_info->handles[reg_type] = 0;
+ buf_info->types[reg_type] = 0;
+ memset(buf_desc, 0x00, sizeof(*buf_desc));
}
- node->map_nr = 0;
+ buf_info->map_nr = 0;
}
static void g2d_dma_start(struct g2d_data *g2d,
pm_runtime_get_sync(g2d->dev);
clk_enable(g2d->gate_clk);
- /* interrupt enable */
- writel_relaxed(G2D_INTEN_ACF | G2D_INTEN_UCF | G2D_INTEN_GCF,
- g2d->regs + G2D_INTEN);
-
writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
}
struct g2d_data *g2d = container_of(work, struct g2d_data,
runqueue_work);
-
mutex_lock(&g2d->runqueue_mutex);
clk_disable(g2d->gate_clk);
pm_runtime_put_sync(g2d->dev);
int i;
for (i = 0; i < nr; i++) {
- index = cmdlist->last - 2 * (i + 1);
+ struct g2d_buf_info *buf_info = &node->buf_info;
+ struct g2d_buf_desc *buf_desc;
+ enum g2d_reg_type reg_type;
+ unsigned long value;
- if (for_addr) {
- /* check userptr buffer type. */
- reg_offset = (cmdlist->data[index] &
- ~0x7fffffff) >> 31;
- if (reg_offset) {
- node->obj_type[i] = BUF_TYPE_USERPTR;
- cmdlist->data[index] &= ~G2D_BUF_USERPTR;
- }
- }
+ index = cmdlist->last - 2 * (i + 1);
reg_offset = cmdlist->data[index] & ~0xfffff000;
-
if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END)
goto err;
if (reg_offset % 4)
if (!for_addr)
goto err;
- if (node->obj_type[i] != BUF_TYPE_USERPTR)
- node->obj_type[i] = BUF_TYPE_GEM;
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ /* check userptr buffer type. */
+ if ((cmdlist->data[index] & ~0x7fffffff) >> 31) {
+ buf_info->types[reg_type] = BUF_TYPE_USERPTR;
+ cmdlist->data[index] &= ~G2D_BUF_USERPTR;
+ } else
+ buf_info->types[reg_type] = BUF_TYPE_GEM;
+ break;
+ case G2D_SRC_COLOR_MODE:
+ case G2D_DST_COLOR_MODE:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->format = value & 0xf;
+ break;
+ case G2D_SRC_LEFT_TOP:
+ case G2D_DST_LEFT_TOP:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->left_x = value & 0x1fff;
+ buf_desc->top_y = (value & 0x1fff0000) >> 16;
+ break;
+ case G2D_SRC_RIGHT_BOTTOM:
+ case G2D_DST_RIGHT_BOTTOM:
+ if (for_addr)
+ goto err;
+
+ reg_type = g2d_get_reg_type(reg_offset);
+ if (reg_type == REG_TYPE_NONE)
+ goto err;
+
+ buf_desc = &buf_info->descs[reg_type];
+ value = cmdlist->data[index + 1];
+
+ buf_desc->right_x = value & 0x1fff;
+ buf_desc->bottom_y = (value & 0x1fff0000) >> 16;
break;
default:
if (for_addr)
cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
cmdlist->data[cmdlist->last++] = 0;
+ /*
+ * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
+ * and GCF bit should be set to INTEN register if user wants
+ * G2D interrupt event once current command list execution is
+ * finished.
+ * Otherwise only ACF bit should be set to INTEN register so
+ * that one interrupt is occured after all command lists
+ * have been completed.
+ */
if (node->event) {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
+ } else {
+ cmdlist->data[cmdlist->last++] = G2D_INTEN;
+ cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
}
/* Check size of cmdlist: last 2 is about G2D_BITBLT_START */
if (ret < 0)
goto err_free_event;
- node->map_nr = req->cmd_buf_nr;
+ node->buf_info.map_nr = req->cmd_buf_nr;
if (req->cmd_buf_nr) {
struct drm_exynos_g2d_cmd *cmd_buf;
exynos_gem_obj = NULL;
}
+unsigned long exynos_drm_gem_get_size(struct drm_device *dev,
+ unsigned int gem_handle,
+ struct drm_file *file_priv)
+{
+ struct exynos_drm_gem_obj *exynos_gem_obj;
+ struct drm_gem_object *obj;
+
+ obj = drm_gem_object_lookup(dev, file_priv, gem_handle);
+ if (!obj) {
+ DRM_ERROR("failed to lookup gem object.\n");
+ return 0;
+ }
+
+ exynos_gem_obj = to_exynos_gem_obj(obj);
+
+ drm_gem_object_unreference_unlocked(obj);
+
+ return exynos_gem_obj->buffer->size;
+}
+
+
struct exynos_drm_gem_obj *exynos_drm_gem_init(struct drm_device *dev,
unsigned long size)
{
int exynos_drm_gem_get_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+/* get buffer size to gem handle. */
+unsigned long exynos_drm_gem_get_size(struct drm_device *dev,
+ unsigned int gem_handle,
+ struct drm_file *file_priv);
+
/* initialize gem object. */
int exynos_drm_gem_init_object(struct drm_gem_object *obj);
}
edid_len = (1 + ctx->raw_edid->extensions) * EDID_LENGTH;
- edid = kzalloc(edid_len, GFP_KERNEL);
+ edid = kmemdup(ctx->raw_edid, edid_len, GFP_KERNEL);
if (!edid) {
DRM_DEBUG_KMS("failed to allocate edid\n");
return ERR_PTR(-ENOMEM);
}
- memcpy(edid, ctx->raw_edid, edid_len);
return edid;
}
return -EINVAL;
}
edid_len = (1 + raw_edid->extensions) * EDID_LENGTH;
- ctx->raw_edid = kzalloc(edid_len, GFP_KERNEL);
+ ctx->raw_edid = kmemdup(raw_edid, edid_len, GFP_KERNEL);
if (!ctx->raw_edid) {
DRM_DEBUG_KMS("failed to allocate raw_edid.\n");
return -ENOMEM;
}
- memcpy(ctx->raw_edid, raw_edid, edid_len);
} else {
/*
* with connection = 0, free raw_edid
mixer_ctx->win_data[win].enabled = false;
}
-int mixer_check_timing(void *ctx, struct fb_videomode *timing)
+static int mixer_check_timing(void *ctx, struct fb_videomode *timing)
{
struct mixer_context *mixer_ctx = ctx;
u32 w, h;
"Enable Haswell and ValleyView Support. "
"(default: false)");
+int i915_disable_power_well __read_mostly = 0;
+module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
+MODULE_PARM_DESC(disable_power_well,
+ "Disable the power well when possible (default: false)");
+
static struct drm_driver driver;
extern int intel_agp_enabled;
extern bool i915_enable_hangcheck __read_mostly;
extern int i915_enable_ppgtt __read_mostly;
extern unsigned int i915_preliminary_hw_support __read_mostly;
+extern int i915_disable_power_well __read_mostly;
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
num_connectors++;
}
+ if (is_cpu_edp)
+ intel_crtc->cpu_transcoder = TRANSCODER_EDP;
+ else
+ intel_crtc->cpu_transcoder = pipe;
+
/* We are not sure yet this won't happen. */
WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
INTEL_PCH_TYPE(dev));
int pipe = intel_crtc->pipe;
int ret;
- if (IS_HASWELL(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
- intel_crtc->cpu_transcoder = TRANSCODER_EDP;
- else
- intel_crtc->cpu_transcoder = pipe;
-
drm_vblank_pre_modeset(dev, pipe);
ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
if (dev_priv->backlight_level == 0)
dev_priv->backlight_level = intel_panel_get_max_backlight(dev);
- dev_priv->backlight_enabled = true;
- intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
-
if (INTEL_INFO(dev)->gen >= 4) {
uint32_t reg, tmp;
}
set_level:
- /* Check the current backlight level and try to set again if it's zero.
- * On some machines, BLC_PWM_CPU_CTL is cleared to zero automatically
- * when BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1 are written.
+ /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1.
+ * BLC_PWM_CPU_CTL may be cleared to zero automatically when these
+ * registers are set.
*/
- if (!intel_panel_get_backlight(dev))
- intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
+ dev_priv->backlight_enabled = true;
+ intel_panel_actually_set_backlight(dev, dev_priv->backlight_level);
}
static void intel_panel_init_backlight(struct drm_device *dev)
if (!IS_HASWELL(dev))
return;
+ if (!i915_disable_power_well && !enable)
+ return;
+
tmp = I915_READ(HSW_PWR_WELL_DRIVER);
is_enabled = tmp & HSW_PWR_WELL_STATE;
enable_requested = tmp & HSW_PWR_WELL_ENABLE;
#define USB_VENDOR_ID_MONTEREY 0x0566
#define USB_DEVICE_ID_GENIUS_KB29E 0x3004
+#define USB_VENDOR_ID_MSI 0x1770
+#define USB_DEVICE_ID_MSI_GX680R_LED_PANEL 0xff00
+
#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
#define USB_DEVICE_ID_N_S_HARMONY 0xc359
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 0x3001
#define USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008 0x3008
+#define USB_VENDOR_ID_REALTEK 0x0bda
+#define USB_DEVICE_ID_REALTEK_READER 0x0152
+
#define USB_VENDOR_ID_ROCCAT 0x1e7d
#define USB_DEVICE_ID_ROCCAT_ARVO 0x30d4
#define USB_DEVICE_ID_ROCCAT_ISKU 0x319c
{
struct mt_device *td = hid_get_drvdata(hid);
__s32 quirks = td->mtclass.quirks;
+ struct input_dev *input = field->hidinput->input;
if (hid->claimed & HID_CLAIMED_INPUT) {
switch (usage->hid) {
break;
default:
+ if (usage->type)
+ input_event(input, usage->type, usage->code,
+ value);
return;
}
if (usage->usage_index + 1 == field->report_count) {
/* we only take into account the last report. */
if (usage->hid == td->last_slot_field)
- mt_complete_slot(td, field->hidinput->input);
+ mt_complete_slot(td, input);
if (field->index == td->last_field_index
&& td->num_received >= td->num_expected)
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_REALTEK, USB_DEVICE_ID_REALTEK_READER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
#include <linux/of_i2c.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
-#include <linux/fsl/mxs-dma.h>
#define DRIVER_NAME "mxs-i2c"
uint32_t timing1;
/* DMA support components */
- int dma_channel;
struct dma_chan *dmach;
- struct mxs_dma_data dma_data;
uint32_t pio_data[2];
uint32_t addr_data;
struct scatterlist sg_io[2];
.functionality = mxs_i2c_func,
};
-static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param)
-{
- struct mxs_i2c_dev *i2c = param;
-
- if (!mxs_dma_is_apbx(chan))
- return false;
-
- if (chan->chan_id != i2c->dma_channel)
- return false;
-
- chan->private = &i2c->dma_data;
-
- return true;
-}
-
static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, int speed)
{
/* The I2C block clock run at 24MHz */
struct device_node *node = dev->of_node;
int ret;
- /*
- * TODO: This is a temporary solution and should be changed
- * to use generic DMA binding later when the helpers get in.
- */
- ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
- &i2c->dma_channel);
- if (ret) {
- dev_err(dev, "Failed to get DMA channel!\n");
- return -ENODEV;
- }
-
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret) {
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
struct pinctrl *pinctrl;
struct resource *res;
resource_size_t res_size;
- int err, irq, dmairq;
- dma_cap_mask_t mask;
+ int err, irq;
pinctrl = devm_pinctrl_get_select_default(dev);
if (IS_ERR(pinctrl))
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- dmairq = platform_get_irq(pdev, 1);
- if (!res || irq < 0 || dmairq < 0)
+ if (!res || irq < 0)
return -ENOENT;
res_size = resource_size(res);
}
/* Setup the DMA */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- i2c->dma_data.chan_irq = dmairq;
- i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+ i2c->dmach = dma_request_slave_channel(dev, "rx-tx");
if (!i2c->dmach) {
dev_err(dev, "Failed to request dma\n");
return -ENODEV;
wq->rq.queue = dma_alloc_coherent(&(rdev->lldi.pdev->dev),
wq->rq.memsize, &(wq->rq.dma_addr),
GFP_KERNEL);
- if (!wq->rq.queue)
+ if (!wq->rq.queue) {
+ ret = -ENOMEM;
goto free_sq;
+ }
PDBG("%s sq base va 0x%p pa 0x%llx rq base va 0x%p pa 0x%llx\n",
__func__, wq->sq.queue,
(unsigned long long)virt_to_phys(wq->sq.queue),
goto bail;
}
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+ opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0x7f;
dev->opstats[opcode].n_bytes += tlen;
dev->opstats[opcode].n_packets++;
config INFINIBAND_QIB
- tristate "QLogic PCIe HCA support"
+ tristate "Intel PCIe HCA support"
depends on 64BIT
---help---
- This is a low-level driver for QLogic PCIe QLE InfiniBand host
- channel adapters. This driver does not support the QLogic
+ This is a low-level driver for Intel PCIe QLE InfiniBand host
+ channel adapters. This driver does not support the Intel
HyperTransport card (model QHT7140).
/*
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
"Attempt pre-IBTA 1.2 DDR speed negotiation");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("QLogic <support@qlogic.com>");
-MODULE_DESCRIPTION("QLogic IB driver");
+MODULE_AUTHOR("Intel <ibsupport@intel.com>");
+MODULE_DESCRIPTION("Intel IB driver");
MODULE_VERSION(QIB_DRIVER_VERSION);
/*
/*
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
/*
* This file contains all the chip-specific register information and
- * access functions for the QLogic QLogic_IB PCI-Express chip.
+ * access functions for the Intel Intel_IB PCI-Express chip.
*
*/
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
static void qib_remove_one(struct pci_dev *);
static int qib_init_one(struct pci_dev *, const struct pci_device_id *);
-#define DRIVER_LOAD_MSG "QLogic " QIB_DRV_NAME " loaded: "
+#define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: "
#define PFX QIB_DRV_NAME ": "
static DEFINE_PCI_DEVICE_TABLE(qib_pci_tbl) = {
dd = qib_init_iba6120_funcs(pdev, ent);
#else
qib_early_err(&pdev->dev,
- "QLogic PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
+ "Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
ent->device);
dd = ERR_PTR(-ENODEV);
#endif
default:
qib_early_err(&pdev->dev,
- "Failing on unknown QLogic deviceid 0x%x\n",
+ "Failing on unknown Intel deviceid 0x%x\n",
ent->device);
ret = -ENODEV;
}
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
#include "qib.h"
#include "qib_7220.h"
-#define SD7220_FW_NAME "qlogic/sd7220.fw"
+#define SD7220_FW_NAME "intel/sd7220.fw"
MODULE_FIRMWARE(SD7220_FW_NAME);
/*
/*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved.
* Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
ibdev->dma_ops = &qib_dma_mapping_ops;
snprintf(ibdev->node_desc, sizeof(ibdev->node_desc),
- "QLogic Infiniband HCA %s", init_utsname()->nodename);
+ "Intel Infiniband HCA %s", init_utsname()->nodename);
ret = ib_register_device(ibdev, qib_create_port_files);
if (ret)
if (++priv->tx_outstanding == ipoib_sendq_size) {
ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n",
tx->qp->qp_num);
- if (ib_req_notify_cq(priv->send_cq, IB_CQ_NEXT_COMP))
- ipoib_warn(priv, "request notify on send CQ failed\n");
netif_stop_queue(dev);
+ rc = ib_req_notify_cq(priv->send_cq,
+ IB_CQ_NEXT_COMP | IB_CQ_REPORT_MISSED_EVENTS);
+ if (rc < 0)
+ ipoib_warn(priv, "request notify on send CQ failed\n");
+ else if (rc)
+ ipoib_send_comp_handler(priv->send_cq, dev);
}
}
}
# OMAP IOMMU support
config OMAP_IOMMU
bool "OMAP IOMMU Support"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP2PLUS
select IOMMU_API
config OMAP_IOVMM
/* allocate a protection domain if a device is added */
dma_domain = find_protection_domain(devid);
- if (dma_domain)
- goto out;
- dma_domain = dma_ops_domain_alloc();
- if (!dma_domain)
- goto out;
- dma_domain->target_dev = devid;
-
- spin_lock_irqsave(&iommu_pd_list_lock, flags);
- list_add_tail(&dma_domain->list, &iommu_pd_list);
- spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
- dev_data = get_dev_data(dev);
+ if (!dma_domain) {
+ dma_domain = dma_ops_domain_alloc();
+ if (!dma_domain)
+ goto out;
+ dma_domain->target_dev = devid;
+
+ spin_lock_irqsave(&iommu_pd_list_lock, flags);
+ list_add_tail(&dma_domain->list, &iommu_pd_list);
+ spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ }
dev->archdata.dma_ops = &amd_iommu_dma_ops;
* BIOS should disable L2B micellaneous clock gating by setting
* L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b
*/
-static void __init amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
+static void amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
{
u32 value;
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/cpumask.h>
#include <linux/errno.h>
#include <linux/msi.h>
#include <linux/irq.h>
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
+obj-$(CONFIG_ARCH_MXS) += irq-mxs.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
#include <asm/exception.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
+
+#include "irqchip.h"
#define HW_ICOLL_VECTOR 0x0000
#define HW_ICOLL_LEVELACK 0x0010
#define ICOLL_NUM_IRQS 128
-static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+static void __iomem *icoll_base;
static struct irq_domain *icoll_domain;
static void icoll_ack_irq(struct irq_data *d)
static void __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
+ icoll_base = of_iomap(np, 0);
+ WARN_ON(!icoll_base);
+
/*
* Interrupt Collector reset, which initializes the priority
* for each irq to level 0.
*/
- mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
+ stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
&icoll_irq_domain_ops, NULL);
WARN_ON(!icoll_domain);
}
-
-static const struct of_device_id icoll_of_match[] __initconst = {
- {.compatible = "fsl,icoll", .data = icoll_of_init},
- { /* sentinel */ }
-};
-
-void __init icoll_init_irq(void)
-{
- of_irq_init(icoll_of_match);
-}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
if (enable) {
if (is_code(code, M5MOLS_RESTYPE_MONITOR))
ret = m5mols_start_monitor(info);
- if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
+ else if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
ret = m5mols_start_capture(info);
else
ret = -EINVAL;
vdelay start of active video in 2 * field lines relative to
trailing edge of /VRESET pulse (VDELAY register).
sheight height of active video in 2 * field lines.
+ extraheight Added to sheight for cropcap.bounds.height only
videostart0 ITU-R frame line number of the line corresponding
to vdelay in the first field. */
#define CROPCAP(minhdelayx1, hdelayx1, swidth, totalwidth, sqwidth, \
- vdelay, sheight, videostart0) \
+ vdelay, sheight, extraheight, videostart0) \
.cropcap.bounds.left = minhdelayx1, \
/* * 2 because vertically we count field lines times two, */ \
/* e.g. 23 * 2 to 23 * 2 + 576 in PAL-BGHI defrect. */ \
.cropcap.bounds.top = (videostart0) * 2 - (vdelay) + MIN_VDELAY, \
/* 4 is a safety margin at the end of the line. */ \
.cropcap.bounds.width = (totalwidth) - (minhdelayx1) - 4, \
- .cropcap.bounds.height = (sheight) + (vdelay) - MIN_VDELAY, \
+ .cropcap.bounds.height = (sheight) + (extraheight) + (vdelay) - \
+ MIN_VDELAY, \
.cropcap.defrect.left = hdelayx1, \
.cropcap.defrect.top = (videostart0) * 2, \
.cropcap.defrect.width = swidth, \
/* totalwidth */ 1135,
/* sqwidth */ 944,
/* vdelay */ 0x20,
- /* bt878 (and bt848?) can capture another
- line below active video. */
- /* sheight */ (576 + 2) + 0x20 - 2,
+ /* sheight */ 576,
+ /* bt878 (and bt848?) can capture another
+ line below active video. */
+ /* extraheight */ 2,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_SECAM,
/* sqwidth */ 944,
/* vdelay */ 0x20,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_Nc,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_M,
/* sqwidth */ 780,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_PAL_N,
/* sqwidth */ 944,
/* vdelay */ 0x20,
/* sheight */ 576,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
.v4l2_id = V4L2_STD_NTSC_M_JP,
/* sqwidth */ 780,
/* vdelay */ 0x16,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
},{
/* that one hopefully works with the strange timing
/* sqwidth */ 944,
/* vdelay */ 0x1a,
/* sheight */ 480,
+ /* extraheight */ 0,
/* videostart0 */ 23)
}
};
static int gsc_m2m_resume(struct gsc_dev *gsc)
{
+ struct gsc_ctx *ctx;
unsigned long flags;
spin_lock_irqsave(&gsc->slock, flags);
/* Clear for full H/W setup in first run after resume */
+ ctx = gsc->m2m.ctx;
gsc->m2m.ctx = NULL;
spin_unlock_irqrestore(&gsc->slock, flags);
if (test_and_clear_bit(ST_M2M_SUSPENDED, &gsc->state))
- gsc_m2m_job_finish(gsc->m2m.ctx,
- VB2_BUF_STATE_ERROR);
+ gsc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
return 0;
}
/* Do not resume if the device was idle before system suspend */
spin_lock_irqsave(&gsc->slock, flags);
if (!test_and_clear_bit(ST_SUSPEND, &gsc->state) ||
- !gsc_m2m_active(gsc)) {
+ !gsc_m2m_opened(gsc)) {
spin_unlock_irqrestore(&gsc->slock, flags);
return 0;
}
static int fimc_m2m_resume(struct fimc_dev *fimc)
{
+ struct fimc_ctx *ctx;
unsigned long flags;
spin_lock_irqsave(&fimc->slock, flags);
/* Clear for full H/W setup in first run after resume */
+ ctx = fimc->m2m.ctx;
fimc->m2m.ctx = NULL;
spin_unlock_irqrestore(&fimc->slock, flags);
if (test_and_clear_bit(ST_M2M_SUSPENDED, &fimc->state))
- fimc_m2m_job_finish(fimc->m2m.ctx,
- VB2_BUF_STATE_ERROR);
+ fimc_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
+
return 0;
}
void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f)
{
enum v4l2_mbus_pixelcode pixelcode = dev->fmt->mbus_code;
- unsigned int i = ARRAY_SIZE(src_pixfmt_map);
+ int i = ARRAY_SIZE(src_pixfmt_map);
u32 cfg;
- while (i-- >= 0) {
+ while (--i >= 0) {
if (src_pixfmt_map[i][0] == pixelcode)
break;
}
{ V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY },
};
u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT);
- unsigned int i = ARRAY_SIZE(pixcode);
+ int i = ARRAY_SIZE(pixcode);
- while (i-- >= 0)
+ while (--i >= 0)
if (pixcode[i][0] == dev->fmt->mbus_code)
break;
cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK;
.id = V4L2_CTRL_CLASS_USER | 0x1001,
.type = V4L2_CTRL_TYPE_BOOLEAN,
.name = "Test Pattern 640x480",
+ .step = 1,
};
static int fimc_lite_create_capture_subdev(struct fimc_lite *fimc)
struct fimc_pipeline *pipeline;
struct v4l2_subdev *sd;
struct mutex *lock;
- int ret = 0;
+ int i, ret = 0;
int ref_count;
if (media_entity_type(sink->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
return 0;
}
+ mutex_lock(lock);
+ ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count;
+
if (!(flags & MEDIA_LNK_FL_ENABLED)) {
- int i;
- mutex_lock(lock);
- ret = __fimc_pipeline_close(pipeline);
+ if (ref_count > 0) {
+ ret = __fimc_pipeline_close(pipeline);
+ if (!ret && fimc)
+ fimc_ctrls_delete(fimc->vid_cap.ctx);
+ }
for (i = 0; i < IDX_MAX; i++)
pipeline->subdevs[i] = NULL;
- if (fimc)
- fimc_ctrls_delete(fimc->vid_cap.ctx);
- mutex_unlock(lock);
- return ret;
+ } else if (ref_count > 0) {
+ /*
+ * Link activation. Enable power of pipeline elements only if
+ * the pipeline is already in use, i.e. its video node is open.
+ * Recreate the controls destroyed during the link deactivation.
+ */
+ ret = __fimc_pipeline_open(pipeline,
+ source->entity, true);
+ if (!ret && fimc)
+ ret = fimc_capture_ctrls_create(fimc);
}
- /*
- * Link activation. Enable power of pipeline elements only if the
- * pipeline is already in use, i.e. its video node is opened.
- * Recreate the controls destroyed during the link deactivation.
- */
- mutex_lock(lock);
-
- ref_count = fimc ? fimc->vid_cap.refcnt : fimc_lite->ref_count;
- if (ref_count > 0)
- ret = __fimc_pipeline_open(pipeline, source->entity, true);
- if (!ret && fimc)
- ret = fimc_capture_ctrls_create(fimc);
mutex_unlock(lock);
return ret ? -EPIPE : ret;
unsigned int frame_type;
dspl_y_addr = s5p_mfc_hw_call(dev->mfc_ops, get_dspl_y_adr, dev);
- frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_dec_frame_type, dev);
+ frame_type = s5p_mfc_hw_call(dev->mfc_ops, get_disp_frame_type, ctx);
/* If frame is same as previous then skip and do not dequeue */
if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
.minimum = 0,
.maximum = 1,
.default_value = 0,
+ .step = 1,
.menu_skip_mask = 0,
},
{
config IR_RX51
tristate "Nokia N900 IR transmitter diode"
- depends on OMAP_DM_TIMER && LIRC && !ARCH_MULTIPLATFORM
+ depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM
---help---
Say Y or M here if you want to enable support for the IR
transmitter diode built in the Nokia N900 (RX51) device.
videodev-objs += v4l2-compat-ioctl32.o
endif
-obj-$(CONFIG_VIDEO_DEV) += videodev.o
+obj-$(CONFIG_VIDEO_V4L2) += videodev.o
obj-$(CONFIG_VIDEO_V4L2_INT_DEVICE) += v4l2-int-device.o
obj-$(CONFIG_VIDEO_V4L2) += v4l2-common.o
}
/**
+ * mei_me_hw_reset_release - release device from the reset
+ *
+ * @dev: the device structure
+ */
+static void mei_me_hw_reset_release(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 hcsr = mei_hcsr_read(hw);
+
+ hcsr |= H_IG;
+ hcsr &= ~H_RST;
+ mei_hcsr_set(hw, hcsr);
+}
+/**
* mei_me_hw_reset - resets fw via mei csr register.
*
* @dev: the device structure
if (intr_enable)
hcsr |= H_IE;
else
- hcsr &= ~H_IE;
-
- mei_hcsr_set(hw, hcsr);
-
- hcsr = mei_hcsr_read(hw) | H_IG;
- hcsr &= ~H_RST;
+ hcsr |= ~H_IE;
mei_hcsr_set(hw, hcsr);
- hcsr = mei_hcsr_read(hw);
+ if (dev->dev_state == MEI_DEV_POWER_DOWN)
+ mei_me_hw_reset_release(dev);
- dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr);
+ dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", mei_hcsr_read(hw));
}
/**
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
} else {
- dev_dbg(&dev->pdev->dev, "FW not ready.\n");
+ dev_dbg(&dev->pdev->dev, "Reset Completed.\n");
+ mei_me_hw_reset_release(dev);
mutex_unlock(&dev->device_lock);
return IRQ_HANDLED;
}
mei_cl_all_write_clear(dev);
}
+void mei_stop(struct mei_device *dev)
+{
+ dev_dbg(&dev->pdev->dev, "stopping the device.\n");
+
+ mutex_lock(&dev->device_lock);
+
+ cancel_delayed_work(&dev->timer_work);
+
+ mei_wd_stop(dev);
+
+ dev->dev_state = MEI_DEV_POWER_DOWN;
+ mei_reset(dev, 0);
+
+ mutex_unlock(&dev->device_lock);
+
+ flush_scheduled_work();
+}
+
void mei_device_init(struct mei_device *dev);
void mei_reset(struct mei_device *dev, int interrupts);
int mei_hw_init(struct mei_device *dev);
+void mei_stop(struct mei_device *dev);
/*
* MEI interrupt functions prototype
hw = to_me_hw(dev);
- mutex_lock(&dev->device_lock);
-
- cancel_delayed_work(&dev->timer_work);
- mei_wd_stop(dev);
+ dev_err(&pdev->dev, "stop\n");
+ mei_stop(dev);
mei_pdev = NULL;
- if (dev->iamthif_cl.state == MEI_FILE_CONNECTED) {
- dev->iamthif_cl.state = MEI_FILE_DISCONNECTING;
- mei_cl_disconnect(&dev->iamthif_cl);
- }
- if (dev->wd_cl.state == MEI_FILE_CONNECTED) {
- dev->wd_cl.state = MEI_FILE_DISCONNECTING;
- mei_cl_disconnect(&dev->wd_cl);
- }
-
- /* Unregistering watchdog device */
mei_watchdog_unregister(dev);
- /* remove entry if already in list */
- dev_dbg(&pdev->dev, "list del iamthif and wd file list.\n");
-
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
- mei_cl_unlink(&dev->wd_cl);
-
- if (dev->open_handle_count > 0)
- dev->open_handle_count--;
- mei_cl_unlink(&dev->iamthif_cl);
-
- dev->iamthif_current_cb = NULL;
- dev->me_clients_num = 0;
-
- mutex_unlock(&dev->device_lock);
-
- flush_scheduled_work();
-
/* disable interrupts */
mei_disable_interrupts(dev);
{
struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev = pci_get_drvdata(pdev);
- int err;
if (!dev)
return -ENODEV;
- mutex_lock(&dev->device_lock);
- cancel_delayed_work(&dev->timer_work);
+ dev_err(&pdev->dev, "suspend\n");
- /* Stop watchdog if exists */
- err = mei_wd_stop(dev);
- /* Set new mei state */
- if (dev->dev_state == MEI_DEV_ENABLED ||
- dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) {
- dev->dev_state = MEI_DEV_POWER_DOWN;
- mei_reset(dev, 0);
- }
- mutex_unlock(&dev->device_lock);
+ mei_stop(dev);
+
+ mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
- return err;
+ return 0;
}
static int mei_pci_resume(struct device *device)
struct delayed_datagram_info {
struct datagram_entry *entry;
- struct vmci_datagram msg;
struct work_struct work;
bool in_dg_host_queue;
+ /* msg and msg_payload must be together. */
+ struct vmci_datagram msg;
+ u8 msg_payload[];
};
/* Number of in-flight host->host datagrams */
.enable_sdio_irq = mxs_mmc_enable_sdio_irq,
};
-static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
-{
- struct mxs_mmc_host *host = param;
- struct mxs_ssp *ssp = &host->ssp;
-
- if (!mxs_dma_is_apbh(chan))
- return false;
-
- if (chan->chan_id != ssp->dma_channel)
- return false;
-
- chan->private = &ssp->dma_data;
-
- return true;
-}
-
static struct platform_device_id mxs_ssp_ids[] = {
{
.name = "imx23-mmc",
struct device_node *np = pdev->dev.of_node;
struct mxs_mmc_host *host;
struct mmc_host *mmc;
- struct resource *iores, *dmares;
+ struct resource *iores;
struct pinctrl *pinctrl;
- int ret = 0, irq_err, irq_dma;
- dma_cap_mask_t mask;
+ int ret = 0, irq_err;
struct regulator *reg_vmmc;
enum of_gpio_flags flags;
struct mxs_ssp *ssp;
u32 bus_width = 0;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
irq_err = platform_get_irq(pdev, 0);
- irq_dma = platform_get_irq(pdev, 1);
- if (!iores || irq_err < 0 || irq_dma < 0)
+ if (!iores || irq_err < 0)
return -EINVAL;
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
goto out_mmc_free;
}
- if (np) {
- ssp->devid = (enum mxs_ssp_id) of_id->data;
- /*
- * TODO: This is a temporary solution and should be changed
- * to use generic DMA binding later when the helpers get in.
- */
- ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
- &ssp->dma_channel);
- if (ret) {
- dev_err(mmc_dev(host->mmc),
- "failed to get dma channel\n");
- goto out_mmc_free;
- }
- } else {
- ssp->devid = pdev->id_entry->driver_data;
- ssp->dma_channel = dmares->start;
- }
+ ssp->devid = (enum mxs_ssp_id) of_id->data;
host->mmc = mmc;
host->sdio_irq_en = 0;
mxs_mmc_reset(host);
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- ssp->dma_data.chan_irq = irq_dma;
- ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
+ ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
if (!ssp->dmach) {
dev_err(mmc_dev(host->mmc),
"%s: failed to request dma\n", __func__);
#include <mach/dma.h>
-#include <mach/regs-sdi.h>
-
#include <linux/platform_data/mmc-s3cmci.h>
#include "s3cmci.h"
#define DRIVER_NAME "s3c-mci"
+#define S3C2410_SDICON (0x00)
+#define S3C2410_SDIPRE (0x04)
+#define S3C2410_SDICMDARG (0x08)
+#define S3C2410_SDICMDCON (0x0C)
+#define S3C2410_SDICMDSTAT (0x10)
+#define S3C2410_SDIRSP0 (0x14)
+#define S3C2410_SDIRSP1 (0x18)
+#define S3C2410_SDIRSP2 (0x1C)
+#define S3C2410_SDIRSP3 (0x20)
+#define S3C2410_SDITIMER (0x24)
+#define S3C2410_SDIBSIZE (0x28)
+#define S3C2410_SDIDCON (0x2C)
+#define S3C2410_SDIDCNT (0x30)
+#define S3C2410_SDIDSTA (0x34)
+#define S3C2410_SDIFSTA (0x38)
+
+#define S3C2410_SDIDATA (0x3C)
+#define S3C2410_SDIIMSK (0x40)
+
+#define S3C2440_SDIDATA (0x40)
+#define S3C2440_SDIIMSK (0x3C)
+
+#define S3C2440_SDICON_SDRESET (1 << 8)
+#define S3C2410_SDICON_SDIOIRQ (1 << 3)
+#define S3C2410_SDICON_FIFORESET (1 << 1)
+#define S3C2410_SDICON_CLOCKTYPE (1 << 0)
+
+#define S3C2410_SDICMDCON_LONGRSP (1 << 10)
+#define S3C2410_SDICMDCON_WAITRSP (1 << 9)
+#define S3C2410_SDICMDCON_CMDSTART (1 << 8)
+#define S3C2410_SDICMDCON_SENDERHOST (1 << 6)
+#define S3C2410_SDICMDCON_INDEX (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL (1 << 12)
+#define S3C2410_SDICMDSTAT_CMDSENT (1 << 11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1 << 10)
+#define S3C2410_SDICMDSTAT_RSPFIN (1 << 9)
+
+#define S3C2440_SDIDCON_DS_WORD (2 << 22)
+#define S3C2410_SDIDCON_TXAFTERRESP (1 << 20)
+#define S3C2410_SDIDCON_RXAFTERCMD (1 << 19)
+#define S3C2410_SDIDCON_BLOCKMODE (1 << 17)
+#define S3C2410_SDIDCON_WIDEBUS (1 << 16)
+#define S3C2410_SDIDCON_DMAEN (1 << 15)
+#define S3C2410_SDIDCON_STOP (1 << 14)
+#define S3C2440_SDIDCON_DATSTART (1 << 14)
+
+#define S3C2410_SDIDCON_XFER_RXSTART (2 << 12)
+#define S3C2410_SDIDCON_XFER_TXSTART (3 << 12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
+
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1 << 9)
+#define S3C2410_SDIDSTA_FIFOFAIL (1 << 8)
+#define S3C2410_SDIDSTA_CRCFAIL (1 << 7)
+#define S3C2410_SDIDSTA_RXCRCFAIL (1 << 6)
+#define S3C2410_SDIDSTA_DATATIMEOUT (1 << 5)
+#define S3C2410_SDIDSTA_XFERFINISH (1 << 4)
+#define S3C2410_SDIDSTA_TXDATAON (1 << 1)
+#define S3C2410_SDIDSTA_RXDATAON (1 << 0)
+
+#define S3C2440_SDIFSTA_FIFORESET (1 << 16)
+#define S3C2440_SDIFSTA_FIFOFAIL (3 << 14)
+#define S3C2410_SDIFSTA_TFDET (1 << 13)
+#define S3C2410_SDIFSTA_RFDET (1 << 12)
+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC (1 << 17)
+#define S3C2410_SDIIMSK_CMDSENT (1 << 16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT (1 << 15)
+#define S3C2410_SDIIMSK_RESPONSEND (1 << 14)
+#define S3C2410_SDIIMSK_SDIOIRQ (1 << 12)
+#define S3C2410_SDIIMSK_FIFOFAIL (1 << 11)
+#define S3C2410_SDIIMSK_CRCSTATUS (1 << 10)
+#define S3C2410_SDIIMSK_DATACRC (1 << 9)
+#define S3C2410_SDIIMSK_DATATIMEOUT (1 << 8)
+#define S3C2410_SDIIMSK_DATAFINISH (1 << 7)
+#define S3C2410_SDIIMSK_TXFIFOHALF (1 << 4)
+#define S3C2410_SDIIMSK_RXFIFOLAST (1 << 2)
+#define S3C2410_SDIIMSK_RXFIFOHALF (1 << 0)
+
enum dbg_channels {
dbg_err = (1 << 0),
dbg_debug = (1 << 1),
#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma"
/* add our owner bbt descriptor */
static uint8_t scan_ff_pattern[] = { 0xff };
free_irq(i, this);
}
-static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
-{
- struct gpmi_nand_data *this = param;
- int dma_channel = (int)this->private;
-
- if (!mxs_dma_is_apbh(chan))
- return false;
- /*
- * only catch the GPMI dma channels :
- * for mx23 : MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
- * (These four channels share the same IRQ!)
- *
- * for mx28 : MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
- * (These eight channels share the same IRQ!)
- */
- if (dma_channel == chan->chan_id) {
- chan->private = &this->dma_data;
- return true;
- }
- return false;
-}
-
static void release_dma_channels(struct gpmi_nand_data *this)
{
unsigned int i;
static int acquire_dma_channels(struct gpmi_nand_data *this)
{
struct platform_device *pdev = this->pdev;
- struct resource *r_dma;
- struct device_node *dn;
- u32 dma_channel;
- int ret;
struct dma_chan *dma_chan;
- dma_cap_mask_t mask;
-
- /* dma channel, we only use the first one. */
- dn = pdev->dev.of_node;
- ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
- if (ret) {
- pr_err("unable to get DMA channel from dt.\n");
- goto acquire_err;
- }
- this->private = (void *)dma_channel;
-
- /* gpmi dma interrupt */
- r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
- GPMI_NAND_DMA_INTERRUPT_RES_NAME);
- if (!r_dma) {
- pr_err("Can't get resource for DMA\n");
- goto acquire_err;
- }
- this->dma_data.chan_irq = r_dma->start;
/* request dma channel */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+ dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
if (!dma_chan) {
pr_err("Failed to request DMA channel.\n");
goto acquire_err;
#include <linux/mtd/nand.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
struct resources {
/* DMA channels */
#define DMA_CHANS 8
struct dma_chan *dma_chans[DMA_CHANS];
- struct mxs_dma_data dma_data;
enum dma_ops_type last_dma_type;
enum dma_ops_type dma_type;
struct completion dma_done;
sprintf(linkname, "slave_%s", slave->name);
ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
linkname);
+
+ /* free the master link created earlier in case of error */
+ if (ret)
+ sysfs_remove_link(&(slave->dev.kobj), "master");
+
return ret;
}
break;
default:
BNX2X_ERR("Non valid capability ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
DP(BNX2X_MSG_DCB, "capid %d:%x\n", capid, *cap);
break;
default:
BNX2X_ERR("Non valid TC-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
return -EINVAL;
}
-static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
+static u8 bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
{
struct bnx2x *bp = netdev_priv(netdev);
DP(BNX2X_MSG_DCB, "state = %d\n", bp->dcbx_local_feat.pfc.enabled);
break;
default:
BNX2X_ERR("Non valid featrue-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "DCB disabled\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
break;
default:
BNX2X_ERR("Non valid featrue-ID\n");
- rval = -EINVAL;
+ rval = 1;
break;
}
} else {
DP(BNX2X_MSG_DCB, "dcbnl call not valid\n");
- rval = -EINVAL;
+ rval = 1;
}
return rval;
static void fec_enet_free_buffers(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- int i;
+ unsigned int i;
struct sk_buff *skb;
struct bufdesc *bdp;
static int fec_enet_alloc_buffers(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
- int i;
+ unsigned int i;
struct sk_buff *skb;
struct bufdesc *bdp;
struct fec_enet_private *fep = netdev_priv(ndev);
struct bufdesc *cbd_base;
struct bufdesc *bdp;
- int i;
+ unsigned int i;
/* Allocate memory for buffer descriptors. */
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
goto failed_clk;
}
+ /* enet_out is optional, depends on board */
+ fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out");
+ if (IS_ERR(fep->clk_enet_out))
+ fep->clk_enet_out = NULL;
+
fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
fep->bufdesc_ex =
pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
if (IS_ERR(fep->clk_ptp)) {
- ret = PTR_ERR(fep->clk_ptp);
+ fep->clk_ptp = NULL;
fep->bufdesc_ex = 0;
}
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
- if (!IS_ERR(fep->clk_ptp))
- clk_prepare_enable(fep->clk_ptp);
+ clk_prepare_enable(fep->clk_enet_out);
+ clk_prepare_enable(fep->clk_ptp);
reg_phy = devm_regulator_get(&pdev->dev, "phy");
if (!IS_ERR(reg_phy)) {
failed_regulator:
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
- if (!IS_ERR(fep->clk_ptp))
- clk_disable_unprepare(fep->clk_ptp);
+ clk_disable_unprepare(fep->clk_enet_out);
+ clk_disable_unprepare(fep->clk_ptp);
failed_pin:
failed_clk:
iounmap(fep->hwp);
clk_disable_unprepare(fep->clk_ptp);
if (fep->ptp_clock)
ptp_clock_unregister(fep->ptp_clock);
+ clk_disable_unprepare(fep->clk_enet_out);
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
for (i = 0; i < FEC_IRQ_NUM; i++) {
fec_stop(ndev);
netif_device_detach(ndev);
}
+ clk_disable_unprepare(fep->clk_enet_out);
clk_disable_unprepare(fep->clk_ahb);
clk_disable_unprepare(fep->clk_ipg);
struct net_device *ndev = dev_get_drvdata(dev);
struct fec_enet_private *fep = netdev_priv(ndev);
+ clk_prepare_enable(fep->clk_enet_out);
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
if (netif_running(ndev)) {
struct clk *clk_ipg;
struct clk *clk_ahb;
+ struct clk *clk_enet_out;
struct clk *clk_ptp;
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
}
+EXPORT_SYMBOL(fec_ptp_start_cyclecounter);
/**
* fec_ptp_adjfreq - adjust ptp cycle frequency
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
+EXPORT_SYMBOL(fec_ptp_ioctl);
/**
* fec_time_keep - call timecounter_read every second to avoid timer overrun
pr_info("registered PHC device on %s\n", ndev->name);
}
}
+EXPORT_SYMBOL(fec_ptp_init);
**/
void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
{
- u32 dtxswc;
+ u32 reg_val, reg_offset;
switch (hw->mac.type) {
case e1000_82576:
+ reg_offset = E1000_DTXSWC;
+ break;
case e1000_i350:
- dtxswc = rd32(E1000_DTXSWC);
- if (enable) {
- dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- /* The PF can spoof - it has to in order to
- * support emulation mode NICs */
- dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
- } else {
- dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- }
- wr32(E1000_DTXSWC, dtxswc);
+ reg_offset = E1000_TXSWC;
break;
default:
- break;
+ return;
+ }
+
+ reg_val = rd32(reg_offset);
+ if (enable) {
+ reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ /* The PF can spoof - it has to in order to
+ * support emulation mode NICs
+ */
+ reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+ } else {
+ reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
}
+ wr32(reg_offset, reg_val);
}
/**
#include <linux/pci.h>
#ifdef CONFIG_IGB_HWMON
-struct i2c_board_info i350_sensor_info = {
+static struct i2c_board_info i350_sensor_info = {
I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
};
if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
return;
- igb_enable_sriov(pdev, max_vfs);
pci_sriov_set_totalvfs(pdev, 7);
+ igb_enable_sriov(pdev, max_vfs);
#endif /* CONFIG_PCI_IOV */
}
if (max_vfs > 7) {
dev_warn(&pdev->dev,
"Maximum of 7 VFs per PF, using max\n");
- adapter->vfs_allocated_count = 7;
+ max_vfs = adapter->vfs_allocated_count = 7;
} else
adapter->vfs_allocated_count = max_vfs;
if (adapter->vfs_allocated_count)
case e1000_82576:
snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
adapter->ptp_caps.owner = THIS_MODULE;
- adapter->ptp_caps.max_adj = 1000000000;
+ adapter->ptp_caps.max_adj = 999999881;
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.pps = 0;
adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576;
free_irq(adapter->msix_entries[vector].vector,
adapter->q_vector[vector]);
}
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
+ /* This failure is non-recoverable - it indicates the system is
+ * out of MSIX vector resources and the VF driver cannot run
+ * without them. Set the number of msix vectors to zero
+ * indicating that not enough can be allocated. The error
+ * will be returned to the user indicating device open failed.
+ * Any further attempts to force the driver to open will also
+ * fail. The only way to recover is to unload the driver and
+ * reload it again. If the system has recovered some MSIX
+ * vectors then it may succeed.
+ */
+ adapter->num_msix_vectors = 0;
return err;
}
struct ixgbe_hw *hw = &adapter->hw;
int err;
+ /* A previous failure to open the device because of a lack of
+ * available MSIX vector resources may have reset the number
+ * of msix vectors variable to zero. The only way to recover
+ * is to unload/reload the driver and hope that the system has
+ * been able to recover some MSIX vector resources.
+ */
+ if (!adapter->num_msix_vectors)
+ return -ENOMEM;
+
/* disallow open during test */
if (test_bit(__IXGBEVF_TESTING, &adapter->state))
return -EBUSY;
err_req_irq:
ixgbevf_down(adapter);
- ixgbevf_free_irq(adapter);
err_setup_rx:
ixgbevf_free_all_rx_resources(adapter);
err_setup_tx:
return 0;
err_free:
- kfree(dev);
+ free_netdev(dev);
err_out:
return err;
}
/* Flush multicast filter */
mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, 1, MLX4_MCAST_CONFIG);
+ /* Remove flow steering rules for the port*/
+ if (mdev->dev->caps.steering_mode ==
+ MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ ASSERT_RTNL();
+ list_for_each_entry_safe(flow, tmp_flow,
+ &priv->ethtool_list, list) {
+ mlx4_flow_detach(mdev->dev, flow->id);
+ list_del(&flow->list);
+ }
+ }
+
mlx4_en_destroy_drop_qp(priv);
/* Free TX Rings */
if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAGS2_REASSIGN_MAC_EN))
mdev->mac_removed[priv->port] = 1;
- /* Remove flow steering rules for the port*/
- if (mdev->dev->caps.steering_mode ==
- MLX4_STEERING_MODE_DEVICE_MANAGED) {
- ASSERT_RTNL();
- list_for_each_entry_safe(flow, tmp_flow,
- &priv->ethtool_list, list) {
- mlx4_flow_detach(mdev->dev, flow->id);
- list_del(&flow->list);
- }
- }
-
/* Free RX Rings */
for (i = 0; i < priv->rx_ring_num; i++) {
mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]);
struct mlx4_slave_event_eq_info *event_eq =
priv->mfunc.master.slave_state[slave].event_eq;
u32 in_modifier = vhcr->in_modifier;
- u32 eqn = in_modifier & 0x1FF;
+ u32 eqn = in_modifier & 0x3FF;
u64 in_param = vhcr->in_param;
int err = 0;
int i;
struct list_head mcg_list;
spinlock_t mcg_spl;
int local_qpn;
+ atomic_t ref_count;
};
enum res_mtt_states {
struct res_fs_rule {
struct res_common com;
+ int qpn;
};
static void *res_tracker_lookup(struct rb_root *root, u64 res_id)
return dev->caps.num_mpts - 1;
}
-static void *find_res(struct mlx4_dev *dev, int res_id,
+static void *find_res(struct mlx4_dev *dev, u64 res_id,
enum mlx4_resource type)
{
struct mlx4_priv *priv = mlx4_priv(dev);
ret->local_qpn = id;
INIT_LIST_HEAD(&ret->mcg_list);
spin_lock_init(&ret->mcg_spl);
+ atomic_set(&ret->ref_count, 0);
return &ret->com;
}
return &ret->com;
}
-static struct res_common *alloc_fs_rule_tr(u64 id)
+static struct res_common *alloc_fs_rule_tr(u64 id, int qpn)
{
struct res_fs_rule *ret;
ret->com.res_id = id;
ret->com.state = RES_FS_RULE_ALLOCATED;
-
+ ret->qpn = qpn;
return &ret->com;
}
ret = alloc_xrcdn_tr(id);
break;
case RES_FS_RULE:
- ret = alloc_fs_rule_tr(id);
+ ret = alloc_fs_rule_tr(id, extra);
break;
default:
return NULL;
static int remove_qp_ok(struct res_qp *res)
{
- if (res->com.state == RES_QP_BUSY)
+ if (res->com.state == RES_QP_BUSY || atomic_read(&res->ref_count) ||
+ !list_empty(&res->mcg_list)) {
+ pr_err("resource tracker: fail to remove qp, state %d, ref_count %d\n",
+ res->com.state, atomic_read(&res->ref_count));
return -EBUSY;
- else if (res->com.state != RES_QP_RESERVED)
+ } else if (res->com.state != RES_QP_RESERVED) {
return -EPERM;
+ }
return 0;
}
struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC];
int err;
int qpn;
+ struct res_qp *rqp;
struct mlx4_net_trans_rule_hw_ctrl *ctrl;
struct _rule_hw *rule_header;
int header_id;
ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf;
qpn = be32_to_cpu(ctrl->qpn) & 0xffffff;
- err = get_res(dev, slave, qpn, RES_QP, NULL);
+ err = get_res(dev, slave, qpn, RES_QP, &rqp);
if (err) {
pr_err("Steering rule with qpn 0x%x rejected.\n", qpn);
return err;
if (err)
goto err_put;
- err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, 0);
+ err = add_res_range(dev, slave, vhcr->out_param, 1, RES_FS_RULE, qpn);
if (err) {
mlx4_err(dev, "Fail to add flow steering resources.\n ");
/* detach rule*/
mlx4_cmd(dev, vhcr->out_param, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
+ goto err_put;
}
+ atomic_inc(&rqp->ref_count);
err_put:
put_res(dev, slave, qpn, RES_QP);
return err;
struct mlx4_cmd_info *cmd)
{
int err;
+ struct res_qp *rqp;
+ struct res_fs_rule *rrule;
if (dev->caps.steering_mode !=
MLX4_STEERING_MODE_DEVICE_MANAGED)
return -EOPNOTSUPP;
+ err = get_res(dev, slave, vhcr->in_param, RES_FS_RULE, &rrule);
+ if (err)
+ return err;
+ /* Release the rule form busy state before removal */
+ put_res(dev, slave, vhcr->in_param, RES_FS_RULE);
+ err = get_res(dev, slave, rrule->qpn, RES_QP, &rqp);
+ if (err)
+ return err;
+
err = rem_res_range(dev, slave, vhcr->in_param, 1, RES_FS_RULE, 0);
if (err) {
mlx4_err(dev, "Fail to remove flow steering resources.\n ");
- return err;
+ goto out;
}
err = mlx4_cmd(dev, vhcr->in_param, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
+ if (!err)
+ atomic_dec(&rqp->ref_count);
+out:
+ put_res(dev, slave, rrule->qpn, RES_QP);
return err;
}
mutex_lock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex);
/*VLAN*/
rem_slave_macs(dev, slave);
+ rem_slave_fs_rule(dev, slave);
rem_slave_qps(dev, slave);
rem_slave_srqs(dev, slave);
rem_slave_cqs(dev, slave);
rem_slave_mtts(dev, slave);
rem_slave_counters(dev, slave);
rem_slave_xrcdns(dev, slave);
- rem_slave_fs_rule(dev, slave);
mutex_unlock(&priv->mfunc.master.res_tracker.slave_list[slave].mutex);
}
}
platform_set_drvdata(pdev, ndev);
- if (lpc_mii_init(pldat) != 0)
+ ret = lpc_mii_init(pldat);
+ if (ret)
goto err_out_unregister_netdev;
netdev_info(ndev, "LPC mac at 0x%08x irq %d\n",
skb->protocol = eth_type_trans(skb, netdev);
if (tcp_ip_status & PCH_GBE_RXD_ACC_STAT_TCPIPOK)
- skb->ip_summed = CHECKSUM_NONE;
- else
skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
napi_gro_receive(&adapter->napi, skb);
(*work_done)++;
/* MDIO bus release function */
static int sh_mdio_release(struct net_device *ndev)
{
+ struct sh_eth_private *mdp = netdev_priv(ndev);
struct mii_bus *bus = dev_get_drvdata(&ndev->dev);
/* unregister mdio bus */
/* free bitbang info */
free_mdio_bitbang(bus);
+ /* free bitbang memory */
+ kfree(mdp->bitbang);
+
return 0;
}
bitbang->ctrl.ops = &bb_ops;
/* MII controller setting */
+ mdp->bitbang = bitbang;
mdp->mii_bus = alloc_mdio_bitbang(&bitbang->ctrl);
if (!mdp->mii_bus) {
ret = -ENOMEM;
}
mdp->tsu_addr = ioremap(rtsu->start,
resource_size(rtsu));
+ if (mdp->tsu_addr == NULL) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "TSU ioremap failed.\n");
+ goto out_release;
+ }
mdp->port = devno % 2;
ndev->features = NETIF_F_HW_VLAN_FILTER;
}
const u16 *reg_offset;
void __iomem *addr;
void __iomem *tsu_addr;
+ struct bb_info *bitbang;
u32 num_rx_ring;
u32 num_tx_ring;
dma_addr_t rx_desc_dma;
struct platform_device *mdio;
parp = of_get_property(slave_node, "phy_id", &lenp);
- if ((parp == NULL) && (lenp != (sizeof(void *) * 2))) {
+ if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
pr_err("Missing slave[%d] phy_id property\n", i);
ret = -EINVAL;
goto error_ret;
AR_PHY_AGC_CONTROL_FLTR_CAL |
AR_PHY_AGC_CONTROL_PKDET_CAL;
+ /* Use chip chainmask only for calibration */
ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
if (rtt) {
ar9003_hw_rtt_disable(ah);
}
+ /* Revert chainmask to runtime parameters */
+ ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
+
/* Initialize list pointers */
ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
int i;
bool needreset = false;
- for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
- if (ATH_TXQ_SETUP(sc, i)) {
- txq = &sc->tx.txq[i];
- ath_txq_lock(sc, txq);
- if (txq->axq_depth) {
- if (txq->axq_tx_inprogress) {
- needreset = true;
- ath_txq_unlock(sc, txq);
- break;
- } else {
- txq->axq_tx_inprogress = true;
- }
+ for (i = 0; i < IEEE80211_NUM_ACS; i++) {
+ txq = sc->tx.txq_map[i];
+
+ ath_txq_lock(sc, txq);
+ if (txq->axq_depth) {
+ if (txq->axq_tx_inprogress) {
+ needreset = true;
+ ath_txq_unlock(sc, txq);
+ break;
+ } else {
+ txq->axq_tx_inprogress = true;
}
- ath_txq_unlock_complete(sc, txq);
}
+ ath_txq_unlock_complete(sc, txq);
+ }
if (needreset) {
ath_dbg(ath9k_hw_common(sc->sc_ah), RESET,
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
u16 len, idx, hdr_len;
+ u16 firstlen, secondlen;
u8 id;
u8 unicast;
u8 sta_id;
len =
sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
hdr_len;
- len = (len + 3) & ~3;
+ firstlen = (len + 3) & ~3;
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys =
- pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE);
+ pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
+ PCI_DMA_TODEVICE);
if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
goto drop_unlock;
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
- len = skb->len - hdr_len;
- if (len) {
+ secondlen = skb->len - hdr_len;
+ if (secondlen > 0) {
phys_addr =
- pci_map_single(il->pci_dev, skb->data + hdr_len, len,
+ pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
PCI_DMA_TODEVICE);
if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
goto drop_unlock;
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
- il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0);
+ il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, len);
- if (len)
- il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0,
- U32_PAD(len));
+ dma_unmap_len_set(out_meta, len, firstlen);
+ if (secondlen > 0)
+ il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
+ U32_PAD(secondlen));
if (!ieee80211_has_morefrags(hdr->frame_control)) {
txq->need_update = 1;
return -1;
}
+ cmd_code = le16_to_cpu(host_cmd->command);
+ cmd_size = le16_to_cpu(host_cmd->size);
+
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET &&
+ cmd_code != HostCmd_CMD_FUNC_SHUTDOWN &&
+ cmd_code != HostCmd_CMD_FUNC_INIT) {
+ dev_err(adapter->dev,
+ "DNLD_CMD: FW in reset state, ignore cmd %#x\n",
+ cmd_code);
+ mwifiex_complete_cmd(adapter, cmd_node);
+ mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ return -1;
+ }
+
/* Set command sequence number */
adapter->seq_num++;
host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
adapter->curr_cmd = cmd_node;
spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
- cmd_code = le16_to_cpu(host_cmd->command);
- cmd_size = le16_to_cpu(host_cmd->size);
-
/* Adjust skb length */
if (cmd_node->cmd_skb->len > cmd_size)
/*
ret = mwifiex_send_cmd_async(priv, cmd_no, cmd_action, cmd_oid,
data_buf);
- if (!ret)
- ret = mwifiex_wait_queue_complete(adapter);
return ret;
}
if (cmd_no == HostCmd_CMD_802_11_SCAN) {
mwifiex_queue_scan_cmd(priv, cmd_node);
} else {
- adapter->cmd_queued = cmd_node;
mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true);
queue_work(adapter->workqueue, &adapter->main_work);
+ if (cmd_node->wait_q_enabled)
+ ret = mwifiex_wait_queue_complete(adapter, cmd_node);
}
return ret;
return ret;
}
+ /* cancel current command */
+ if (adapter->curr_cmd) {
+ dev_warn(adapter->dev, "curr_cmd is still in processing\n");
+ del_timer(&adapter->cmd_timer);
+ mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd);
+ adapter->curr_cmd = NULL;
+ }
+
/* shut down mwifiex */
dev_dbg(adapter->dev, "info: shutdown mwifiex...\n");
u16 cmd_wait_q_required;
struct mwifiex_wait_queue cmd_wait_q;
u8 scan_wait_q_woken;
- struct cmd_ctrl_node *cmd_queued;
spinlock_t queue_lock; /* lock for tx queues */
struct completion fw_load;
u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
struct mwifiex_multicast_list *mcast_list);
int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
struct net_device *dev);
-int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter);
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_queued);
int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
struct cfg80211_ssid *req_ssid);
int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type);
list_del(&cmd_node->list);
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
- adapter->cmd_queued = cmd_node;
mwifiex_insert_cmd_to_pending_q(adapter, cmd_node,
true);
queue_work(adapter->workqueue, &adapter->main_work);
+
+ /* Perform internal scan synchronously */
+ if (!priv->scan_request)
+ mwifiex_wait_queue_complete(adapter, cmd_node);
} else {
spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
flags);
/* Normal scan */
ret = mwifiex_scan_networks(priv, NULL);
- if (!ret)
- ret = mwifiex_wait_queue_complete(priv->adapter);
-
up(&priv->async_sem);
return ret;
* This function waits on a cmd wait queue. It also cancels the pending
* request after waking up, in case of errors.
*/
-int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
+int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
+ struct cmd_ctrl_node *cmd_queued)
{
int status;
- struct cmd_ctrl_node *cmd_queued;
-
- if (!adapter->cmd_queued)
- return 0;
-
- cmd_queued = adapter->cmd_queued;
- adapter->cmd_queued = NULL;
dev_dbg(adapter->dev, "cmd pending\n");
atomic_inc(&adapter->cmd_pending);
if (unlikely(!_urb)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Can't allocate urb. Drop skb!\n");
+ kfree_skb(skb);
return;
}
_rtl_submit_tx_urb(hw, _urb);
/* special soc specific control */
if (ctrl->mpp_get || ctrl->mpp_set) {
- if (!ctrl->name || !ctrl->mpp_set || !ctrl->mpp_set) {
+ if (!ctrl->name || !ctrl->mpp_get || !ctrl->mpp_set) {
dev_err(&pdev->dev, "wrong soc control info\n");
return -EINVAL;
}
static int pinconf_dbg_state_print(struct seq_file *s, void *d)
{
if (strlen(dbg_state_name))
- seq_printf(s, "%s\n", dbg_pinname);
+ seq_printf(s, "%s\n", dbg_state_name);
else
seq_printf(s, "No pin state set\n");
return 0;
* pin config.
*/
-#ifdef CONFIG_GENERIC_PINCONF
+#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_DEBUG_FS)
void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin);
}
/* check if pin use AlternateFunction register */
- if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED))
+ if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED))
return mode;
/*
* if pin GPIOSEL bit is set and pin supports alternate function,
}
if (!gpio_range) {
+ /*
+ * A pin should not be freed more times than allocated.
+ */
+ if (WARN_ON(!desc->mux_usecount))
+ return NULL;
desc->mux_usecount--;
if (desc->mux_usecount)
return NULL;
#include <linux/stmp_device.h>
#include <linux/stmp3xxx_rtc_wdt.h>
-#include <mach/common.h>
-
#define STMP3XXX_RTC_CTRL 0x0
#define STMP3XXX_RTC_CTRL_SET 0x4
#define STMP3XXX_RTC_CTRL_CLR 0x8
platform_set_drvdata(pdev, rtc_data);
- mxs_reset_block(rtc_data->io);
+ stmp_reset_block(rtc_data->io);
writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
{
struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(dev);
- mxs_reset_block(rtc_data->io);
+ stmp_reset_block(rtc_data->io);
writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
return status;
}
-static bool mxs_ssp_dma_filter(struct dma_chan *chan, void *param)
-{
- struct mxs_ssp *ssp = param;
-
- if (!mxs_dma_is_apbh(chan))
- return false;
-
- if (chan->chan_id != ssp->dma_channel)
- return false;
-
- chan->private = &ssp->dma_data;
-
- return true;
-}
-
static const struct of_device_id mxs_spi_dt_ids[] = {
{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
struct spi_master *master;
struct mxs_spi *spi;
struct mxs_ssp *ssp;
- struct resource *iores, *dmares;
+ struct resource *iores;
struct pinctrl *pinctrl;
struct clk *clk;
void __iomem *base;
- int devid, dma_channel, clk_freq;
- int ret = 0, irq_err, irq_dma;
- dma_cap_mask_t mask;
+ int devid, clk_freq;
+ int ret = 0, irq_err;
/*
* Default clock speed for the SPI core. 160MHz seems to
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_err = platform_get_irq(pdev, 0);
- irq_dma = platform_get_irq(pdev, 1);
- if (!iores || irq_err < 0 || irq_dma < 0)
+ if (!iores || irq_err < 0)
return -EINVAL;
base = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(clk))
return PTR_ERR(clk);
- if (np) {
- devid = (enum mxs_ssp_id) of_id->data;
- /*
- * TODO: This is a temporary solution and should be changed
- * to use generic DMA binding later when the helpers get in.
- */
- ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
- &dma_channel);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to get DMA channel\n");
- return -EINVAL;
- }
-
- ret = of_property_read_u32(np, "clock-frequency",
- &clk_freq);
- if (ret)
- clk_freq = clk_freq_default;
- } else {
- dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!dmares)
- return -EINVAL;
- devid = pdev->id_entry->driver_data;
- dma_channel = dmares->start;
+ devid = (enum mxs_ssp_id) of_id->data;
+ ret = of_property_read_u32(np, "clock-frequency",
+ &clk_freq);
+ if (ret)
clk_freq = clk_freq_default;
- }
master = spi_alloc_master(&pdev->dev, sizeof(*spi));
if (!master)
ssp->clk = clk;
ssp->base = base;
ssp->devid = devid;
- ssp->dma_channel = dma_channel;
init_completion(&spi->c);
if (ret)
goto out_master_free;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- ssp->dma_data.chan_irq = irq_dma;
- ssp->dmach = dma_request_channel(mask, mxs_ssp_dma_filter, ssp);
+ ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
if (!ssp->dmach) {
dev_err(ssp->dev, "Failed to request DMA\n");
goto out_master_free;
case TRIG_NONE:
/* continous acquisition */
devpriv->ai_continous = 1;
- devpriv->ai_sample_count = 0;
+ devpriv->ai_sample_count = 1;
break;
}
#include <linux/delay.h>
#include <linux/input.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
-
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
depends on CONFIGFS_FS=y && SYSFS=y && !HIGHMEM && ZCACHE=y
depends on NET
# must ensure struct page is 8-byte aligned
- select HAVE_ALIGNED_STRUCT_PAGE if !64_BIT
+ select HAVE_ALIGNED_STRUCT_PAGE if !64BIT
default n
help
RAMster allows RAM on other machines in a cluster to be utilized
return ret;
ret = target_check_reservation(cmd);
- if (ret)
+ if (ret) {
+ cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT;
return ret;
+ }
ret = dev->transport->parse_cdb(cmd);
if (ret)
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
#ifndef MODULE
/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
* working as well for the module options so we don't break people. We
static void __used s8250_options(void)
{
#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250."
+#define MODULE_PARAM_PREFIX "8250_core."
module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644);
module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644);
#endif
}
#else
-MODULE_ALIAS("8250");
+MODULE_ALIAS("8250_core");
+#endif
#endif
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
+ /* WCH CH352 2S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH352_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/*
* ASIX devices with FIFO bug
*/
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
+config SERIAL_8250_DEPRECATED_OPTIONS
+ bool "Support 8250_core.* kernel options (DEPRECATED)"
+ depends on SERIAL_8250
+ default y
+ ---help---
+ In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+ accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+ 8250.nr_uarts=4. We now renamed the module back to 8250, but if
+ anybody noticed in 3.7 and changed their userspace we still have to
+ keep the 8350_core.* options around until they revert the changes
+ they already did.
+
+ If 8250 is built as a module, this adds 8250_core alias instead.
+
+ If you did not notice yet and/or you have userspace from pre-3.7, it
+ is safe (and recommended) to say N here.
+
config SERIAL_8250_PNP
bool "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250_core.o
-8250_core-y := 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o
+8250-y := 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
- ret = find_first_zero_bit(&atmel_ports_in_use,
- sizeof(atmel_ports_in_use));
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
- if (ret > ATMEL_MAX_UART) {
+ if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
- if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
/* "port" is allocated statically, so we shouldn't free it */
- clear_bit(port->line, &atmel_ports_in_use);
+ clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
#include <linux/pinctrl/consumer.h>
#include <linux/of_device.h>
#include <linux/dma-mapping.h>
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
#include <asm/cacheflush.h>
struct device *dev;
/* for DMA */
- struct mxs_dma_data dma_data;
- int dma_channel_rx, dma_channel_tx;
- int dma_irq_rx, dma_irq_tx;
- int dma_channel;
-
struct scatterlist tx_sgl;
struct dma_chan *tx_dma_chan;
void *tx_dma_buf;
return mctrl;
}
-static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param)
-{
- struct mxs_auart_port *s = param;
-
- if (!mxs_dma_is_apbx(chan))
- return false;
-
- if (s->dma_channel == chan->chan_id) {
- chan->private = &s->dma_data;
- return true;
- }
- return false;
-}
-
static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
static void dma_rx_callback(void *arg)
{
static int mxs_auart_dma_init(struct mxs_auart_port *s)
{
- dma_cap_mask_t mask;
-
if (auart_dma_enabled(s))
return 0;
- /* We do not get the right DMA channels. */
- if (s->dma_channel_rx == -1 || s->dma_channel_tx == -1)
- return -EINVAL;
-
/* init for RX */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- s->dma_channel = s->dma_channel_rx;
- s->dma_data.chan_irq = s->dma_irq_rx;
- s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+ s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx");
if (!s->rx_dma_chan)
goto err_out;
s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
goto err_out;
/* init for TX */
- s->dma_channel = s->dma_channel_tx;
- s->dma_data.chan_irq = s->dma_irq_tx;
- s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+ s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx");
if (!s->tx_dma_chan)
goto err_out;
s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- u32 dma_channel[2];
int ret;
if (!np)
}
s->port.line = ret;
- s->dma_irq_rx = platform_get_irq(pdev, 1);
- s->dma_irq_tx = platform_get_irq(pdev, 2);
+ s->flags |= MXS_AUART_DMA_CONFIG;
- ret = of_property_read_u32_array(np, "fsl,auart-dma-channel",
- dma_channel, 2);
- if (ret == 0) {
- s->dma_channel_rx = dma_channel[0];
- s->dma_channel_tx = dma_channel[1];
-
- s->flags |= MXS_AUART_DMA_CONFIG;
- } else {
- s->dma_channel_rx = -1;
- s->dma_channel_tx = -1;
- }
return 0;
}
/* Receive Timeout register is enabled with value of 10 */
xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /* Clear out any pending interrupts before enabling them */
+ xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
/* Set the Interrupt Registers with desired interrupts */
xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
static struct vcs_poll_data *
vcs_poll_data_get(struct file *file)
{
- struct vcs_poll_data *poll = file->private_data;
+ struct vcs_poll_data *poll = file->private_data, *kill = NULL;
if (poll)
return poll;
file->private_data = poll;
} else {
/* someone else raced ahead of us */
- vcs_poll_data_free(poll);
+ kill = poll;
poll = file->private_data;
}
spin_unlock(&file->f_lock);
+ if (kill)
+ vcs_poll_data_free(kill);
return poll;
}
}
EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
+int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ if (!hcd->driver->find_raw_port_number)
+ return port1;
+
+ return hcd->driver->find_raw_port_number(hcd, port1);
+}
+
static int usb_hcd_request_irqs(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/pci.h>
+#include <linux/usb/hcd.h>
#include <acpi/acpi_bus.h>
#include "usb.h"
* connected to.
*/
if (!udev->parent) {
- *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev),
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ int raw_port_num;
+
+ raw_port_num = usb_hcd_find_raw_port_number(hcd,
port_num);
+ *handle = acpi_get_child(DEVICE_ACPI_HANDLE(&udev->dev),
+ raw_port_num);
if (!*handle)
return -ENODEV;
} else {
tristate "LPC32XX USB Peripheral Controller"
depends on ARCH_LPC32XX
select USB_ISP1301
+ select USB_OTG_UTILS
help
This option selects the USB device controller in the LPC32xx SoC.
memset (itd, 0, sizeof *itd);
itd->itd_dma = itd_dma;
+ itd->frame = 9999; /* an invalid value */
list_add (&itd->itd_list, &sched->td_list);
}
spin_unlock_irqrestore (&ehci->lock, flags);
memset (sitd, 0, sizeof *sitd);
sitd->sitd_dma = sitd_dma;
+ sitd->frame = 9999; /* an invalid value */
list_add (&sitd->sitd_list, &iso_sched->td_list);
}
* is attached to (or the roothub port its ancestor hub is attached to). All we
* know is the index of that port under either the USB 2.0 or the USB 3.0
* roothub, but that doesn't give us the real index into the HW port status
- * registers. Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed. Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
*/
static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
struct usb_device *udev)
{
struct usb_device *top_dev;
- unsigned int num_similar_speed_ports;
- unsigned int faked_port_num;
- int i;
+ struct usb_hcd *hcd;
+
+ if (udev->speed == USB_SPEED_SUPER)
+ hcd = xhci->shared_hcd;
+ else
+ hcd = xhci->main_hcd;
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- faked_port_num = top_dev->portnum;
- for (i = 0, num_similar_speed_ports = 0;
- i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
- u8 port_speed = xhci->port_array[i];
-
- /*
- * Skip ports that don't have known speeds, or have duplicate
- * Extended Capabilities port speed entries.
- */
- if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
- continue;
- /*
- * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
- * 1.1 ports are under the USB 2.0 hub. If the port speed
- * matches the device speed, it's a similar speed port.
- */
- if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
- num_similar_speed_ports++;
- if (num_similar_speed_ports == faked_port_num)
- /* Roothub ports are numbered from 1 to N */
- return i+1;
- }
- return 0;
+ return xhci_find_raw_port_number(hcd, top_dev->portnum);
}
/* Setup an xHCI virtual device for a Set Address command */
.set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
.enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
.disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
+ .find_raw_port_number = xhci_find_raw_port_number,
};
/*-------------------------------------------------------------------------*/
max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
if ((port_id <= 0) || (port_id > max_ports)) {
xhci_warn(xhci, "Invalid port id %d\n", port_id);
- bogus_port_status = true;
- goto cleanup;
+ inc_deq(xhci, xhci->event_ring);
+ return;
}
/* Figure out which usb_hcd this port is attached to:
* is it a USB 3.0 port or a USB 2.0/1.1 port?
*/
major_revision = xhci->port_array[port_id - 1];
+
+ /* Find the right roothub. */
+ hcd = xhci_to_hcd(xhci);
+ if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
+ hcd = xhci->shared_hcd;
+
if (major_revision == 0) {
xhci_warn(xhci, "Event for port %u not in "
"Extended Capabilities, ignoring.\n",
* into the index into the ports on the correct split roothub, and the
* correct bus_state structure.
*/
- /* Find the right roothub. */
- hcd = xhci_to_hcd(xhci);
- if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
- hcd = xhci->shared_hcd;
bus_state = &xhci->bus_state[hcd_index(hcd)];
if (hcd->speed == HCD_USB3)
port_array = xhci->usb3_ports;
if (event_trb != ep_ring->dequeue &&
event_trb != td->last_trb)
td->urb->actual_length =
- td->urb->transfer_buffer_length
- - TRB_LEN(le32_to_cpu(event->transfer_len));
+ td->urb->transfer_buffer_length -
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
else
td->urb->actual_length = 0;
/* Maybe the event was for the data stage? */
td->urb->actual_length =
td->urb->transfer_buffer_length -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
xhci_dbg(xhci, "Waiting for status "
"stage event\n");
return 0;
/* handle completion code */
switch (trb_comp_code) {
case COMP_SUCCESS:
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
frame->status = 0;
break;
}
len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
}
len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
if (trb_comp_code != COMP_STOP_INVAL) {
frame->actual_length = len;
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
if (event_trb != td->last_trb ||
- TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
xhci_warn(xhci, "WARN Successful completion "
"on short TX\n");
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
"%d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
td->urb->transfer_buffer_length,
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
/* Fast path - was this the last TRB in the TD for this URB? */
if (event_trb == td->last_trb) {
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
if (td->urb->transfer_buffer_length <
td->urb->actual_length) {
xhci_warn(xhci, "HC gave bad length "
"of %d bytes left\n",
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)));
td->urb->actual_length = 0;
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
*status = -EREMOTEIO;
if (trb_comp_code != COMP_STOP_INVAL)
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
- TRB_LEN(le32_to_cpu(event->transfer_len));
+ EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
* transfer type
*/
case COMP_SUCCESS:
- if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+ if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
break;
if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
trb_comp_code = COMP_SHORT_TX;
* TD list.
*/
if (list_empty(&ep_ring->td_list)) {
- xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
- "with no TDs queued?\n",
- TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
- ep_index);
- xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
- (le32_to_cpu(event->flags) &
- TRB_TYPE_BITMASK)>>10);
- xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ /*
+ * A stopped endpoint may generate an extra completion
+ * event if the device was suspended. Don't print
+ * warnings.
+ */
+ if (!(trb_comp_code == COMP_STOP ||
+ trb_comp_code == COMP_STOP_INVAL)) {
+ xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
+ TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
+ ep_index);
+ xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
+ (le32_to_cpu(event->flags) &
+ TRB_TYPE_BITMASK)>>10);
+ xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
+ }
if (ep->skip) {
ep->skip = false;
xhci_dbg(xhci, "td_list is empty while skip "
return 0;
}
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ __le32 __iomem *base_addr = &xhci->op_regs->port_status_base;
+ __le32 __iomem *addr;
+ int raw_port;
+
+ if (hcd->speed != HCD_USB3)
+ addr = xhci->usb2_ports[port1 - 1];
+ else
+ addr = xhci->usb3_ports[port1 - 1];
+
+ raw_port = (addr - base_addr)/NUM_PORT_REGS + 1;
+ return raw_port;
+}
+
#ifdef CONFIG_USB_SUSPEND
/* BESL to HIRD Encoding array for USB2 LPM */
__le32 flags;
};
+/* Transfer event TRB length bit mask */
+/* bits 0:23 */
+#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
+
/** Transfer Event bit fields **/
#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
#ifdef CONFIG_PM
int xhci_bus_suspend(struct usb_hcd *hcd);
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
+ select USB_OTG_UTILS
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
+ { USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
/*
+ * Mitsubishi Electric Corp. (http://www.meau.com)
+ * Submitted by Konstantin Holoborodko
+ */
+#define MITSUBISHI_VID 0x06D3
+#define MITSUBISHI_FXUSB_PID 0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */
+
+/*
* Definitions for B&B Electronics products.
*/
#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
+ init_waitqueue_head(&port->delta_msr_wait);
/* Keep this for private driver use for the moment but
should probably go away */
INIT_WORK(&port->work, usb_serial_port_work);
VHOST_SCSI_VQ_IO = 2,
};
+/*
+ * VIRTIO_RING_F_EVENT_IDX seems broken. Not sure the bug is in
+ * kernel but disabling it helps.
+ * TODO: debug and remove the workaround.
+ */
+enum {
+ VHOST_SCSI_FEATURES = VHOST_FEATURES & (~VIRTIO_RING_F_EVENT_IDX)
+};
+
#define VHOST_SCSI_MAX_TARGET 256
#define VHOST_SCSI_MAX_VQ 128
static int vhost_scsi_set_features(struct vhost_scsi *vs, u64 features)
{
- if (features & ~VHOST_FEATURES)
+ if (features & ~VHOST_SCSI_FEATURES)
return -EOPNOTSUPP;
mutex_lock(&vs->dev.mutex);
return -EFAULT;
return 0;
case VHOST_GET_FEATURES:
- features = VHOST_FEATURES;
+ features = VHOST_SCSI_FEATURES;
if (copy_to_user(featurep, &features, sizeof features))
return -EFAULT;
return 0;
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ select OF_VIDEOMODE
help
Framebuffer support for the MXS SoC.
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <video/of_display_timing.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
-#include <linux/mxsfb.h>
+#include <linux/fb.h>
+#include <linux/regulator/consumer.h>
+#include <video/videomode.h>
#define REG_SET 4
#define REG_CLR 8
#define VDCTRL0_ENABLE_PRESENT (1 << 28)
#define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
#define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
-#define VDCTRL0_DOTCLK_ACT_FAILING (1 << 25)
+#define VDCTRL0_DOTCLK_ACT_FALLING (1 << 25)
#define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
#define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
#define BLUE 2
#define TRANSP 3
+#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */
+#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
+#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
+#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
+
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
+#define MXSFB_SYNC_DOTCLK_FALLING_ACT (1 << 7) /* negtive edge sampling */
+
enum mxsfb_devtype {
MXSFB_V3,
MXSFB_V4,
unsigned ld_intf_width;
unsigned dotclk_delay;
const struct mxsfb_devdata *devdata;
- int mapped;
+ u32 sync;
+ struct regulator *reg_lcd;
};
#define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
{
struct mxsfb_info *host = to_imxfb_host(fb_info);
u32 reg;
+ int ret;
dev_dbg(&host->pdev->dev, "%s\n", __func__);
+ if (host->reg_lcd) {
+ ret = regulator_enable(host->reg_lcd);
+ if (ret) {
+ dev_err(&host->pdev->dev,
+ "lcd regulator enable failed: %d\n", ret);
+ return;
+ }
+ }
+
clk_prepare_enable(host->clk);
clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
struct mxsfb_info *host = to_imxfb_host(fb_info);
unsigned loop;
u32 reg;
+ int ret;
dev_dbg(&host->pdev->dev, "%s\n", __func__);
clk_disable_unprepare(host->clk);
host->enabled = 0;
+
+ if (host->reg_lcd) {
+ ret = regulator_disable(host->reg_lcd);
+ if (ret)
+ dev_err(&host->pdev->dev,
+ "lcd regulator disable failed: %d\n", ret);
+ }
}
static int mxsfb_set_par(struct fb_info *fb_info)
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DATA_ENABLE_HIGH_ACT)
+ if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
- if (fb_info->var.sync & FB_SYNC_DOTCLK_FAILING_ACT)
- vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
+ if (host->sync & MXSFB_SYNC_DOTCLK_FALLING_ACT)
+ vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
writel(vdctrl0, host->base + LCDC_VDCTRL0);
return 0;
}
+static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host)
+{
+ struct fb_info *fb_info = &host->fb_info;
+ struct fb_var_screeninfo *var = &fb_info->var;
+ struct device *dev = &host->pdev->dev;
+ struct device_node *np = host->pdev->dev.of_node;
+ struct device_node *display_np;
+ struct device_node *timings_np;
+ struct display_timings *timings;
+ u32 width;
+ int i;
+ int ret = 0;
+
+ display_np = of_parse_phandle(np, "display", 0);
+ if (!display_np) {
+ dev_err(dev, "failed to find display phandle\n");
+ return -ENOENT;
+ }
+
+ ret = of_property_read_u32(display_np, "bus-width", &width);
+ if (ret < 0) {
+ dev_err(dev, "failed to get property bus-width\n");
+ goto put_display_node;
+ }
+
+ switch (width) {
+ case 8:
+ host->ld_intf_width = STMLCDIF_8BIT;
+ break;
+ case 16:
+ host->ld_intf_width = STMLCDIF_16BIT;
+ break;
+ case 18:
+ host->ld_intf_width = STMLCDIF_18BIT;
+ break;
+ case 24:
+ host->ld_intf_width = STMLCDIF_24BIT;
+ break;
+ default:
+ dev_err(dev, "invalid bus-width value\n");
+ ret = -EINVAL;
+ goto put_display_node;
+ }
+
+ ret = of_property_read_u32(display_np, "bits-per-pixel",
+ &var->bits_per_pixel);
+ if (ret < 0) {
+ dev_err(dev, "failed to get property bits-per-pixel\n");
+ goto put_display_node;
+ }
+
+ timings = of_get_display_timings(display_np);
+ if (!timings) {
+ dev_err(dev, "failed to get display timings\n");
+ ret = -ENOENT;
+ goto put_display_node;
+ }
+
+ timings_np = of_find_node_by_name(display_np,
+ "display-timings");
+ if (!timings_np) {
+ dev_err(dev, "failed to find display-timings node\n");
+ ret = -ENOENT;
+ goto put_display_node;
+ }
+
+ for (i = 0; i < of_get_child_count(timings_np); i++) {
+ struct videomode vm;
+ struct fb_videomode fb_vm;
+
+ ret = videomode_from_timing(timings, &vm, i);
+ if (ret < 0)
+ goto put_timings_node;
+ ret = fb_videomode_from_videomode(&vm, &fb_vm);
+ if (ret < 0)
+ goto put_timings_node;
+
+ if (vm.data_flags & DISPLAY_FLAGS_DE_HIGH)
+ host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
+ if (vm.data_flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+ host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
+ fb_add_videomode(&fb_vm, &fb_info->modelist);
+ }
+
+put_timings_node:
+ of_node_put(timings_np);
+put_display_node:
+ of_node_put(display_np);
+ return ret;
+}
+
static int mxsfb_init_fbinfo(struct mxsfb_info *host)
{
struct fb_info *fb_info = &host->fb_info;
struct fb_var_screeninfo *var = &fb_info->var;
- struct mxsfb_platform_data *pdata = host->pdev->dev.platform_data;
dma_addr_t fb_phys;
void *fb_virt;
- unsigned fb_size = pdata->fb_size;
+ unsigned fb_size;
+ int ret;
fb_info->fbops = &mxsfb_ops;
fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
fb_info->fix.accel = FB_ACCEL_NONE;
- var->bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
+ ret = mxsfb_init_fbinfo_dt(host);
+ if (ret)
+ return ret;
+
var->nonstd = 0;
var->activate = FB_ACTIVATE_NOW;
var->accel_flags = 0;
var->vmode = FB_VMODE_NONINTERLACED;
- host->dotclk_delay = pdata->dotclk_delay;
- host->ld_intf_width = pdata->ld_intf_width;
-
/* Memory allocation for framebuffer */
- if (pdata->fb_phys) {
- if (!fb_size)
- return -EINVAL;
-
- fb_phys = pdata->fb_phys;
+ fb_size = SZ_2M;
+ fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
+ if (!fb_virt)
+ return -ENOMEM;
- if (!request_mem_region(fb_phys, fb_size, host->pdev->name))
- return -ENOMEM;
-
- fb_virt = ioremap(fb_phys, fb_size);
- if (!fb_virt) {
- release_mem_region(fb_phys, fb_size);
- return -ENOMEM;
- }
- host->mapped = 1;
- } else {
- if (!fb_size)
- fb_size = SZ_2M; /* default */
- fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
- if (!fb_virt)
- return -ENOMEM;
-
- fb_phys = virt_to_phys(fb_virt);
- }
+ fb_phys = virt_to_phys(fb_virt);
fb_info->fix.smem_start = fb_phys;
fb_info->screen_base = fb_virt;
{
struct fb_info *fb_info = &host->fb_info;
- if (host->mapped) {
- iounmap(fb_info->screen_base);
- release_mem_region(fb_info->fix.smem_start,
- fb_info->screen_size);
- } else {
- free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
- }
+ free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
}
static struct platform_device_id mxsfb_devtype[] = {
{
const struct of_device_id *of_id =
of_match_device(mxsfb_dt_ids, &pdev->dev);
- struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
struct mxsfb_info *host;
struct fb_info *fb_info;
struct fb_modelist *modelist;
struct pinctrl *pinctrl;
- int panel_enable;
- enum of_gpio_flags flags;
- int i, ret;
+ int ret;
if (of_id)
pdev->id_entry = of_id->data;
- if (!pdata) {
- dev_err(&pdev->dev, "No platformdata. Giving up\n");
- return -ENODEV;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Cannot get memory IO resource\n");
return -ENODEV;
}
- if (!request_mem_region(res->start, resource_size(res), pdev->name))
- return -EBUSY;
-
fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
if (!fb_info) {
dev_err(&pdev->dev, "Failed to allocate fbdev\n");
- ret = -ENOMEM;
- goto error_alloc_info;
+ return -ENOMEM;
}
host = to_imxfb_host(fb_info);
- host->base = ioremap(res->start, resource_size(res));
- if (!host->base) {
+ host->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->base)) {
dev_err(&pdev->dev, "ioremap failed\n");
- ret = -ENOMEM;
- goto error_ioremap;
+ ret = PTR_ERR(host->base);
+ goto fb_release;
}
host->pdev = pdev;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
- goto error_getpin;
+ goto fb_release;
}
- host->clk = clk_get(&host->pdev->dev, NULL);
+ host->clk = devm_clk_get(&host->pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
- goto error_getclock;
+ goto fb_release;
}
- panel_enable = of_get_named_gpio_flags(pdev->dev.of_node,
- "panel-enable-gpios", 0, &flags);
- if (gpio_is_valid(panel_enable)) {
- unsigned long f = GPIOF_OUT_INIT_HIGH;
- if (flags == OF_GPIO_ACTIVE_LOW)
- f = GPIOF_OUT_INIT_LOW;
- ret = devm_gpio_request_one(&pdev->dev, panel_enable,
- f, "panel-enable");
- if (ret) {
- dev_err(&pdev->dev,
- "failed to request gpio %d: %d\n",
- panel_enable, ret);
- goto error_panel_enable;
- }
- }
+ host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
+ if (IS_ERR(host->reg_lcd))
+ host->reg_lcd = NULL;
- fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+ fb_info->pseudo_palette = devm_kzalloc(&pdev->dev, sizeof(u32) * 16,
+ GFP_KERNEL);
if (!fb_info->pseudo_palette) {
ret = -ENOMEM;
- goto error_pseudo_pallette;
+ goto fb_release;
}
INIT_LIST_HEAD(&fb_info->modelist);
ret = mxsfb_init_fbinfo(host);
if (ret != 0)
- goto error_init_fb;
-
- for (i = 0; i < pdata->mode_count; i++)
- fb_add_videomode(&pdata->mode_list[i], &fb_info->modelist);
+ goto fb_release;
modelist = list_first_entry(&fb_info->modelist,
struct fb_modelist, list);
ret = register_framebuffer(fb_info);
if (ret != 0) {
dev_err(&pdev->dev,"Failed to register framebuffer\n");
- goto error_register;
+ goto fb_destroy;
}
if (!host->enabled) {
return 0;
-error_register:
+fb_destroy:
if (host->enabled)
clk_disable_unprepare(host->clk);
fb_destroy_modelist(&fb_info->modelist);
-error_init_fb:
- kfree(fb_info->pseudo_palette);
-error_pseudo_pallette:
-error_panel_enable:
- clk_put(host->clk);
-error_getclock:
-error_getpin:
- iounmap(host->base);
-error_ioremap:
+fb_release:
framebuffer_release(fb_info);
-error_alloc_info:
- release_mem_region(res->start, resource_size(res));
return ret;
}
{
struct fb_info *fb_info = platform_get_drvdata(pdev);
struct mxsfb_info *host = to_imxfb_host(fb_info);
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (host->enabled)
mxsfb_disable_controller(fb_info);
unregister_framebuffer(fb_info);
- kfree(fb_info->pseudo_palette);
mxsfb_free_videomem(host);
- iounmap(host->base);
- clk_put(host->clk);
framebuffer_release(fb_info);
- release_mem_region(res->start, resource_size(res));
platform_set_drvdata(pdev, NULL);
#include <linux/omap-dma.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
#include "lcdc.h"
u32 power_on_resume:1;
};
+/* used to pass spi_device from SPI to DSS portion of the driver */
+static struct tpo_td043_device *g_tpo_td043;
+
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
{
struct spi_message m;
static int tpo_td043_probe(struct omap_dss_device *dssdev)
{
- struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+ struct tpo_td043_device *tpo_td043 = g_tpo_td043;
int nreset_gpio = dssdev->reset_gpio;
int ret = 0;
if (ret)
dev_warn(&dssdev->dev, "failed to create sysfs files\n");
+ dev_set_drvdata(&dssdev->dev, tpo_td043);
+
return 0;
fail_gpio_req:
return -ENODEV;
}
+ if (g_tpo_td043 != NULL)
+ return -EBUSY;
+
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
tpo_td043->spi = spi;
tpo_td043->nreset_gpio = dssdev->reset_gpio;
dev_set_drvdata(&spi->dev, tpo_td043);
- dev_set_drvdata(&dssdev->dev, tpo_td043);
+ g_tpo_td043 = tpo_td043;
omap_dss_register_driver(&tpo_td043_driver);
omap_dss_unregister_driver(&tpo_td043_driver);
kfree(tpo_td043);
+ g_tpo_td043 = NULL;
return 0;
}
static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
- OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
- OMAP_DSS_OUTPUT_DSI1,
+ OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_DIGIT */
- OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI |
- OMAP_DSS_OUTPUT_DPI,
+ OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
config XEN_STUB
bool "Xen stub drivers"
- depends on XEN && X86_64
+ depends on XEN && X86_64 && BROKEN
default n
help
Allow kernel to install stub drivers, to reserve space for Xen drivers,
if (unlikely((cpu != cpu_from_evtchn(port))))
do_hypercall = 1;
- else
+ else {
+ /*
+ * Need to clear the mask before checking pending to
+ * avoid a race with an event becoming pending.
+ *
+ * EVTCHNOP_unmask will only trigger an upcall if the
+ * mask bit was set, so if a hypercall is needed
+ * remask the event.
+ */
+ sync_clear_bit(port, BM(&s->evtchn_mask[0]));
evtchn_pending = sync_test_bit(port, BM(&s->evtchn_pending[0]));
- if (unlikely(evtchn_pending && xen_hvm_domain()))
- do_hypercall = 1;
+ if (unlikely(evtchn_pending && xen_hvm_domain())) {
+ sync_set_bit(port, BM(&s->evtchn_mask[0]));
+ do_hypercall = 1;
+ }
+ }
/* Slow path (hypercall) if this is a non-local port or if this is
* an hvm domain and an event is pending (hvm domains don't have
} else {
struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
- sync_clear_bit(port, BM(&s->evtchn_mask[0]));
-
/*
* The following is basically the equivalent of
* 'hw_resend_irq'. Just like a real IO-APIC we 'lose
}
EXPORT_SYMBOL_GPL(xen_event_channel_op_compat);
-int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
+int xen_physdev_op_compat(int cmd, void *arg)
{
struct physdev_op op;
int rc;
return rc;
}
+EXPORT_SYMBOL_GPL(xen_physdev_op_compat);
pr = per_cpu(processors, i);
perf = per_cpu_ptr(acpi_perf_data, i);
+ if (!pr)
+ continue;
+
pr->performance = perf;
rc = acpi_processor_get_performance_info(pr);
if (rc)
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/hypervisor.h>
+#include <xen/interface/physdev.h>
#include "pciback.h"
#include "conf_space.h"
#include "conf_space_quirks.h"
static void pcistub_device_release(struct kref *kref)
{
struct pcistub_device *psdev;
+ struct pci_dev *dev;
struct xen_pcibk_dev_data *dev_data;
psdev = container_of(kref, struct pcistub_device, kref);
- dev_data = pci_get_drvdata(psdev->dev);
+ dev = psdev->dev;
+ dev_data = pci_get_drvdata(dev);
- dev_dbg(&psdev->dev->dev, "pcistub_device_release\n");
+ dev_dbg(&dev->dev, "pcistub_device_release\n");
- xen_unregister_device_domain_owner(psdev->dev);
+ xen_unregister_device_domain_owner(dev);
/* Call the reset function which does not take lock as this
* is called from "unbind" which takes a device_lock mutex.
*/
- __pci_reset_function_locked(psdev->dev);
- if (pci_load_and_free_saved_state(psdev->dev,
- &dev_data->pci_saved_state)) {
- dev_dbg(&psdev->dev->dev, "Could not reload PCI state\n");
- } else
- pci_restore_state(psdev->dev);
+ __pci_reset_function_locked(dev);
+ if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
+ dev_dbg(&dev->dev, "Could not reload PCI state\n");
+ else
+ pci_restore_state(dev);
+
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+ int err = HYPERVISOR_physdev_op(PHYSDEVOP_release_msix,
+ &ppdev);
+
+ if (err)
+ dev_warn(&dev->dev, "MSI-X release failed (%d)\n",
+ err);
+ }
/* Disable the device */
- xen_pcibk_reset_device(psdev->dev);
+ xen_pcibk_reset_device(dev);
kfree(dev_data);
- pci_set_drvdata(psdev->dev, NULL);
+ pci_set_drvdata(dev, NULL);
/* Clean-up the device */
- xen_pcibk_config_free_dyn_fields(psdev->dev);
- xen_pcibk_config_free_dev(psdev->dev);
+ xen_pcibk_config_free_dyn_fields(dev);
+ xen_pcibk_config_free_dev(dev);
- psdev->dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
- pci_dev_put(psdev->dev);
+ dev->dev_flags &= ~PCI_DEV_FLAGS_ASSIGNED;
+ pci_dev_put(dev);
kfree(psdev);
}
if (err)
goto config_release;
+ if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) {
+ struct physdev_pci_device ppdev = {
+ .seg = pci_domain_nr(dev->bus),
+ .bus = dev->bus->number,
+ .devfn = dev->devfn
+ };
+
+ err = HYPERVISOR_physdev_op(PHYSDEVOP_prepare_msix, &ppdev);
+ if (err)
+ dev_err(&dev->dev, "MSI-X preparation failed (%d)\n",
+ err);
+ }
+
/* We need the device active to save the state. */
dev_dbg(&dev->dev, "save state of device\n");
pci_save_state(dev);
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
-fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += intel/sd7220.fw
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
if (tree_mod_dont_log(fs_info, NULL))
return 0;
+ __tree_mod_log_free_eb(fs_info, old_root);
+
ret = tree_mod_alloc(fs_info, flags, &tm);
if (ret < 0)
goto out;
static noinline void
tree_mod_log_eb_copy(struct btrfs_fs_info *fs_info, struct extent_buffer *dst,
struct extent_buffer *src, unsigned long dst_offset,
- unsigned long src_offset, int nr_items)
+ unsigned long src_offset, int nr_items, int log_removal)
{
int ret;
int i;
}
for (i = 0; i < nr_items; i++) {
- ret = tree_mod_log_insert_key_locked(fs_info, src,
- i + src_offset,
- MOD_LOG_KEY_REMOVE);
- BUG_ON(ret < 0);
+ if (log_removal) {
+ ret = tree_mod_log_insert_key_locked(fs_info, src,
+ i + src_offset,
+ MOD_LOG_KEY_REMOVE);
+ BUG_ON(ret < 0);
+ }
ret = tree_mod_log_insert_key_locked(fs_info, dst,
i + dst_offset,
MOD_LOG_KEY_ADD);
ret = btrfs_dec_ref(trans, root, buf, 1, 1);
BUG_ON(ret); /* -ENOMEM */
}
- tree_mod_log_free_eb(root->fs_info, buf);
clean_tree_block(trans, root, buf);
*last_ref = 1;
}
btrfs_set_node_ptr_generation(parent, parent_slot,
trans->transid);
btrfs_mark_buffer_dirty(parent);
+ tree_mod_log_free_eb(root->fs_info, buf);
btrfs_free_tree_block(trans, root, buf, parent_start,
last_ref);
}
goto enospc;
}
- tree_mod_log_free_eb(root->fs_info, root->node);
tree_mod_log_set_root_pointer(root, child);
rcu_assign_pointer(root->node, child);
push_items = min(src_nritems - 8, push_items);
tree_mod_log_eb_copy(root->fs_info, dst, src, dst_nritems, 0,
- push_items);
+ push_items, 1);
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(dst_nritems),
btrfs_node_key_ptr_offset(0),
sizeof(struct btrfs_key_ptr));
tree_mod_log_eb_copy(root->fs_info, dst, src, 0,
- src_nritems - push_items, push_items);
+ src_nritems - push_items, push_items, 1);
copy_extent_buffer(dst, src,
btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(src_nritems - push_items),
int mid;
int ret;
u32 c_nritems;
+ int tree_mod_log_removal = 1;
c = path->nodes[level];
WARN_ON(btrfs_header_generation(c) != trans->transid);
if (c == root->node) {
/* trying to split the root, lets make a new one */
ret = insert_new_root(trans, root, path, level + 1);
+ /*
+ * removal of root nodes has been logged by
+ * tree_mod_log_set_root_pointer due to locking
+ */
+ tree_mod_log_removal = 0;
if (ret)
return ret;
} else {
(unsigned long)btrfs_header_chunk_tree_uuid(split),
BTRFS_UUID_SIZE);
- tree_mod_log_eb_copy(root->fs_info, split, c, 0, mid, c_nritems - mid);
+ tree_mod_log_eb_copy(root->fs_info, split, c, 0, mid, c_nritems - mid,
+ tree_mod_log_removal);
copy_extent_buffer(split, c,
btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(mid),
0, objectid, NULL, 0, 0, 0);
if (IS_ERR(leaf)) {
ret = PTR_ERR(leaf);
+ leaf = NULL;
goto fail;
}
btrfs_tree_unlock(leaf);
+ return root;
+
fail:
- if (ret)
- return ERR_PTR(ret);
+ if (leaf) {
+ btrfs_tree_unlock(leaf);
+ free_extent_buffer(leaf);
+ }
+ kfree(root);
- return root;
+ return ERR_PTR(ret);
}
static struct btrfs_root *alloc_log_tree(struct btrfs_trans_handle *trans,
if (btrfs_root_refs(&root->root_item) == 0)
synchronize_srcu(&fs_info->subvol_srcu);
- if (fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+ if (test_bit(BTRFS_FS_STATE_ERROR, &fs_info->fs_state)) {
btrfs_free_log(NULL, root);
btrfs_free_log_root_tree(NULL, fs_info);
}
cache->bytes_super += stripe_len;
ret = add_excluded_extent(root, cache->key.objectid,
stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret)
+ return ret;
}
for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
cache->key.objectid, bytenr,
0, &logical, &nr, &stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret)
+ return ret;
while (nr--) {
cache->bytes_super += stripe_len;
ret = add_excluded_extent(root, logical[nr],
stripe_len);
- BUG_ON(ret); /* -ENOMEM */
+ if (ret) {
+ kfree(logical);
+ return ret;
+ }
}
kfree(logical);
spin_lock(&sinfo->lock);
spin_lock(&block_rsv->lock);
- block_rsv->size = num_bytes;
+ block_rsv->size = min_t(u64, num_bytes, 512 * 1024 * 1024);
num_bytes = sinfo->bytes_used + sinfo->bytes_pinned +
sinfo->bytes_reserved + sinfo->bytes_readonly +
* If the inodes csum_bytes is the same as the original
* csum_bytes then we know we haven't raced with any free()ers
* so we can just reduce our inodes csum bytes and carry on.
- * Otherwise we have to do the normal free thing to account for
- * the case that the free side didn't free up its reserve
- * because of this outstanding reservation.
*/
- if (BTRFS_I(inode)->csum_bytes == csum_bytes)
+ if (BTRFS_I(inode)->csum_bytes == csum_bytes) {
calc_csum_metadata_size(inode, num_bytes, 0);
- else
- to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+ } else {
+ u64 orig_csum_bytes = BTRFS_I(inode)->csum_bytes;
+ u64 bytes;
+
+ /*
+ * This is tricky, but first we need to figure out how much we
+ * free'd from any free-ers that occured during this
+ * reservation, so we reset ->csum_bytes to the csum_bytes
+ * before we dropped our lock, and then call the free for the
+ * number of bytes that were freed while we were trying our
+ * reservation.
+ */
+ bytes = csum_bytes - BTRFS_I(inode)->csum_bytes;
+ BTRFS_I(inode)->csum_bytes = csum_bytes;
+ to_free = calc_csum_metadata_size(inode, bytes, 0);
+
+
+ /*
+ * Now we need to see how much we would have freed had we not
+ * been making this reservation and our ->csum_bytes were not
+ * artificially inflated.
+ */
+ BTRFS_I(inode)->csum_bytes = csum_bytes - num_bytes;
+ bytes = csum_bytes - orig_csum_bytes;
+ bytes = calc_csum_metadata_size(inode, bytes, 0);
+
+ /*
+ * Now reset ->csum_bytes to what it should be. If bytes is
+ * more than to_free then we would have free'd more space had we
+ * not had an artificially high ->csum_bytes, so we need to free
+ * the remainder. If bytes is the same or less then we don't
+ * need to do anything, the other free-ers did the correct
+ * thing.
+ */
+ BTRFS_I(inode)->csum_bytes = orig_csum_bytes - num_bytes;
+ if (bytes > to_free)
+ to_free = bytes - to_free;
+ else
+ to_free = 0;
+ }
spin_unlock(&BTRFS_I(inode)->lock);
if (dropped)
to_free += btrfs_calc_trans_metadata_size(root, dropped);
* info has super bytes accounted for, otherwise we'll think
* we have more space than we actually do.
*/
- exclude_super_stripes(root, cache);
+ ret = exclude_super_stripes(root, cache);
+ if (ret) {
+ /*
+ * We may have excluded something, so call this just in
+ * case.
+ */
+ free_excluded_extents(root, cache);
+ kfree(cache->free_space_ctl);
+ kfree(cache);
+ goto error;
+ }
/*
* check for two cases, either we are full, and therefore
cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
- exclude_super_stripes(root, cache);
+ ret = exclude_super_stripes(root, cache);
+ if (ret) {
+ /*
+ * We may have excluded something, so call this just in
+ * case.
+ */
+ free_excluded_extents(root, cache);
+ kfree(cache->free_space_ctl);
+ kfree(cache);
+ return ret;
+ }
add_new_free_space(cache, root->fs_info, chunk_offset,
chunk_offset + size);
GFP_NOFS);
}
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+ struct page *page;
+
+ while (index <= end_index) {
+ page = find_get_page(inode->i_mapping, index);
+ BUG_ON(!page); /* Pages should be in the extent_io_tree */
+ clear_page_dirty_for_io(page);
+ page_cache_release(page);
+ index++;
+ }
+ return 0;
+}
+
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end)
+{
+ unsigned long index = start >> PAGE_CACHE_SHIFT;
+ unsigned long end_index = end >> PAGE_CACHE_SHIFT;
+ struct page *page;
+
+ while (index <= end_index) {
+ page = find_get_page(inode->i_mapping, index);
+ BUG_ON(!page); /* Pages should be in the extent_io_tree */
+ account_page_redirty(page);
+ __set_page_dirty_nobuffers(page);
+ page_cache_release(page);
+ index++;
+ }
+ return 0;
+}
+
/*
* helper function to set both pages and extents in the tree writeback
*/
unsigned long *map_len);
int extent_range_uptodate(struct extent_io_tree *tree,
u64 start, u64 end);
+int extent_range_clear_dirty_for_io(struct inode *inode, u64 start, u64 end);
+int extent_range_redirty_for_io(struct inode *inode, u64 start, u64 end);
int extent_clear_unlock_delalloc(struct inode *inode,
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
csums_in_item = btrfs_item_size_nr(leaf, path->slots[0]);
csums_in_item /= csum_size;
- if (csum_offset >= csums_in_item) {
+ if (csum_offset == csums_in_item) {
ret = -EFBIG;
goto fail;
+ } else if (csum_offset > csums_in_item) {
+ goto fail;
}
}
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_csum_item);
return -ENOMEM;
sector_sum = sums->sums;
- trans->adding_csums = 1;
again:
next_offset = (u64)-1;
found_next = 0;
goto again;
}
out:
- trans->adding_csums = 0;
btrfs_free_path(path);
return ret;
{
struct inode *inode = file_inode(file);
struct extent_state *cached_state = NULL;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
u64 cur_offset;
u64 last_byte;
u64 alloc_start;
ret = btrfs_check_data_free_space(inode, alloc_end - alloc_start);
if (ret)
return ret;
+ if (root->fs_info->quota_enabled) {
+ ret = btrfs_qgroup_reserve(root, alloc_end - alloc_start);
+ if (ret)
+ goto out_reserve_fail;
+ }
/*
* wait for ordered IO before we have any locks. We'll loop again
&cached_state, GFP_NOFS);
out:
mutex_unlock(&inode->i_mutex);
+ if (root->fs_info->quota_enabled)
+ btrfs_qgroup_free(root, alloc_end - alloc_start);
+out_reserve_fail:
/* Let go of our reservation. */
btrfs_free_reserved_data_space(inode, alloc_end - alloc_start);
return ret;
int i;
int will_compress;
int compress_type = root->fs_info->compress_type;
+ int redirty = 0;
/* if this is a small write inside eof, kick off a defrag */
if ((end - start + 1) < 16 * 1024 &&
if (BTRFS_I(inode)->force_compress)
compress_type = BTRFS_I(inode)->force_compress;
+ /*
+ * we need to call clear_page_dirty_for_io on each
+ * page in the range. Otherwise applications with the file
+ * mmap'd can wander in and change the page contents while
+ * we are compressing them.
+ *
+ * If the compression fails for any reason, we set the pages
+ * dirty again later on.
+ */
+ extent_range_clear_dirty_for_io(inode, start, end);
+ redirty = 1;
ret = btrfs_compress_pages(compress_type,
inode->i_mapping, start,
total_compressed, pages,
__set_page_dirty_nobuffers(locked_page);
/* unlocked later on in the async handlers */
}
+ if (redirty)
+ extent_range_redirty_for_io(inode, start, end);
add_async_extent(async_cow, start, end - start + 1,
0, NULL, 0, BTRFS_COMPRESS_NONE);
*num_added += 1;
struct btrfs_ordered_sum *sum;
list_for_each_entry(sum, list, list) {
+ trans->adding_csums = 1;
btrfs_csum_file_blocks(trans,
BTRFS_I(inode)->root->fs_info->csum_root, sum);
+ trans->adding_csums = 0;
}
return 0;
}
* 1 for the dir item
* 1 for the dir index
* 1 for the inode ref
- * 1 for the inode ref in the tree log
- * 2 for the dir entries in the log
* 1 for the inode
*/
- trans = btrfs_start_transaction(root, 8);
+ trans = btrfs_start_transaction(root, 5);
if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
return trans;
* inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items
* should cover the worst case number of items we'll modify.
*/
- trans = btrfs_start_transaction(root, 20);
+ trans = btrfs_start_transaction(root, 11);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out_notrans;
INIT_LIST_HEAD(&splice);
INIT_LIST_HEAD(&works);
+ mutex_lock(&root->fs_info->ordered_operations_mutex);
spin_lock(&root->fs_info->ordered_extent_lock);
list_splice_init(&root->fs_info->ordered_extents, &splice);
while (!list_empty(&splice)) {
cond_resched();
}
+ mutex_unlock(&root->fs_info->ordered_operations_mutex);
}
/*
ret = btrfs_find_all_roots(trans, fs_info, node->bytenr,
sgn > 0 ? node->seq - 1 : node->seq, &roots);
if (ret < 0)
- goto out;
+ return ret;
spin_lock(&fs_info->qgroup_lock);
quota_root = fs_info->quota_root;
ret = 0;
unlock:
spin_unlock(&fs_info->qgroup_lock);
-out:
ulist_free(roots);
ulist_free(tmp);
eb = path->nodes[0];
ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
item_size = btrfs_item_size_nr(eb, path->slots[0]);
- btrfs_release_path(path);
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
do {
ret < 0 ? -1 : ref_level,
ret < 0 ? -1 : ref_root);
} while (ret != 1);
+ btrfs_release_path(path);
} else {
+ btrfs_release_path(path);
swarn.path = path;
swarn.dev = dev;
iterate_extent_inodes(fs_info, found_key.objectid,
found_key.type != key.type) {
key.offset += right_len;
break;
- } else {
- if (found_key.offset != key.offset + right_len) {
- /* Should really not happen */
- ret = -EIO;
- goto out;
- }
+ }
+ if (found_key.offset != key.offset + right_len) {
+ ret = 0;
+ goto out;
}
key = found_key;
}
em = lookup_extent_mapping(em_tree, chunk_start, 1);
read_unlock(&em_tree->lock);
- BUG_ON(!em || em->start != chunk_start);
+ if (!em) {
+ printk(KERN_ERR "btrfs: couldn't find em for chunk %Lu\n",
+ chunk_start);
+ return -EIO;
+ }
+
+ if (em->start != chunk_start) {
+ printk(KERN_ERR "btrfs: bad chunk start, em=%Lu, wanted=%Lu\n",
+ em->start, chunk_start);
+ free_extent_map(em);
+ return -EIO;
+ }
map = (struct map_lookup *)em->bdev;
length = em->len;
bool slash = false;
int error = 0;
- br_read_lock(&vfsmount_lock);
while (dentry != root->dentry || vfsmnt != root->mnt) {
struct dentry * parent;
if (!error && !slash)
error = prepend(buffer, buflen, "/", 1);
-out:
- br_read_unlock(&vfsmount_lock);
return error;
global_root:
error = prepend(buffer, buflen, "/", 1);
if (!error)
error = is_mounted(vfsmnt) ? 1 : 2;
- goto out;
+ return error;
}
/**
int error;
prepend(&res, &buflen, "\0", 1);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = prepend_path(path, root, &res, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
return ERR_PTR(error);
int error;
prepend(&res, &buflen, "\0", 1);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = prepend_path(path, &root, &res, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error > 1)
error = -EINVAL;
return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
get_fs_root(current->fs, &root);
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
error = path_with_deleted(path, &root, &res, &buflen);
+ write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
res = ERR_PTR(error);
- write_sequnlock(&rename_lock);
path_put(&root);
return res;
}
get_fs_root_and_pwd(current->fs, &root, &pwd);
error = -ENOENT;
+ br_read_lock(&vfsmount_lock);
write_seqlock(&rename_lock);
if (!d_unlinked(pwd.dentry)) {
unsigned long len;
prepend(&cwd, &buflen, "\0", 1);
error = prepend_path(&pwd, &root, &cwd, &buflen);
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
if (error < 0)
goto out;
}
} else {
write_sequnlock(&rename_lock);
+ br_read_unlock(&vfsmount_lock);
}
out:
* dcache.c
*/
extern struct dentry *__d_alloc(struct super_block *, const struct qstr *);
+
+/*
+ * read_write.c
+ */
+extern ssize_t __kernel_write(struct file *, const char *, size_t, loff_t *);
}
mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~MNT_WRITE_HOLD;
+ /* Don't allow unprivileged users to change mount flags */
+ if ((flag & CL_UNPRIVILEGED) && (mnt->mnt.mnt_flags & MNT_READONLY))
+ mnt->mnt.mnt_flags |= MNT_LOCK_READONLY;
+
atomic_inc(&sb->s_active);
mnt->mnt.mnt_sb = sb;
mnt->mnt.mnt_root = dget(root);
if (readonly_request == __mnt_is_readonly(mnt))
return 0;
+ if (mnt->mnt_flags & MNT_LOCK_READONLY)
+ return -EPERM;
+
if (readonly_request)
error = mnt_make_readonly(real_mount(mnt));
else
/* First pass: copy the tree topology */
copy_flags = CL_COPY_ALL | CL_EXPIRE;
if (user_ns != mnt_ns->user_ns)
- copy_flags |= CL_SHARED_TO_SLAVE;
+ copy_flags |= CL_SHARED_TO_SLAVE | CL_UNPRIVILEGED;
new = copy_tree(old, old->mnt.mnt_root, copy_flags);
if (IS_ERR(new)) {
up_write(&namespace_sem);
return check_mnt(real_mount(mnt));
}
+bool current_chrooted(void)
+{
+ /* Does the current process have a non-standard root */
+ struct path ns_root;
+ struct path fs_root;
+ bool chrooted;
+
+ /* Find the namespace root */
+ ns_root.mnt = ¤t->nsproxy->mnt_ns->root->mnt;
+ ns_root.dentry = ns_root.mnt->mnt_root;
+ path_get(&ns_root);
+ while (d_mountpoint(ns_root.dentry) && follow_down_one(&ns_root))
+ ;
+
+ get_fs_root(current->fs, &fs_root);
+
+ chrooted = !path_equal(&fs_root, &ns_root);
+
+ path_put(&fs_root);
+ path_put(&ns_root);
+
+ return chrooted;
+}
+
+void update_mnt_policy(struct user_namespace *userns)
+{
+ struct mnt_namespace *ns = current->nsproxy->mnt_ns;
+ struct mount *mnt;
+
+ down_read(&namespace_sem);
+ list_for_each_entry(mnt, &ns->list, mnt_list) {
+ switch (mnt->mnt.mnt_sb->s_magic) {
+ case SYSFS_MAGIC:
+ userns->may_mount_sysfs = true;
+ break;
+ case PROC_SUPER_MAGIC:
+ userns->may_mount_proc = true;
+ break;
+ }
+ if (userns->may_mount_sysfs && userns->may_mount_proc)
+ break;
+ }
+ up_read(&namespace_sem);
+}
+
static void *mntns_get(struct task_struct *task)
{
struct mnt_namespace *ns = NULL;
bl_pipe_msg.bl_wq = &nn->bl_wq;
memset(msg, 0, sizeof(*msg));
- msg->data = kzalloc(1 + sizeof(bl_umount_request), GFP_NOFS);
+ msg->len = sizeof(bl_msg) + bl_msg.totallen;
+ msg->data = kzalloc(msg->len, GFP_NOFS);
if (!msg->data)
goto out;
memcpy(msg->data, &bl_msg, sizeof(bl_msg));
dataptr = (uint8_t *) msg->data;
memcpy(&dataptr[sizeof(bl_msg)], &bl_umount_request, sizeof(bl_umount_request));
- msg->len = sizeof(bl_msg) + bl_msg.totallen;
add_wait_queue(&nn->bl_wq, &wq);
if (rpc_queue_upcall(nn->bl_device_pipe, msg) < 0) {
return ret;
}
-static int nfs_idmap_instantiate(struct key *key, struct key *authkey, char *data)
+static int nfs_idmap_instantiate(struct key *key, struct key *authkey, char *data, size_t datalen)
{
- return key_instantiate_and_link(key, data, strlen(data) + 1,
+ return key_instantiate_and_link(key, data, datalen,
id_resolver_cache->thread_keyring,
authkey);
}
struct key *key, struct key *authkey)
{
char id_str[NFS_UINT_MAXLEN];
+ size_t len;
int ret = -ENOKEY;
/* ret = -ENOKEY */
case IDMAP_CONV_NAMETOID:
if (strcmp(upcall->im_name, im->im_name) != 0)
break;
- sprintf(id_str, "%d", im->im_id);
- ret = nfs_idmap_instantiate(key, authkey, id_str);
+ /* Note: here we store the NUL terminator too */
+ len = sprintf(id_str, "%d", im->im_id) + 1;
+ ret = nfs_idmap_instantiate(key, authkey, id_str, len);
break;
case IDMAP_CONV_IDTONAME:
if (upcall->im_id != im->im_id)
break;
- ret = nfs_idmap_instantiate(key, authkey, im->im_name);
+ len = strlen(im->im_name);
+ ret = nfs_idmap_instantiate(key, authkey, im->im_name, len);
break;
default:
ret = -EINVAL;
{
if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags))
return;
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
pnfs_return_layout(inode);
}
int status;
if (pnfs_ld_layoutret_on_setattr(inode))
- pnfs_return_layout(inode);
+ pnfs_commit_and_return_layout(inode);
nfs_fattr_init(fattr);
static void nfs4_layoutcommit_release(void *calldata)
{
struct nfs4_layoutcommit_data *data = calldata;
- struct pnfs_layout_segment *lseg, *tmp;
- unsigned long *bitlock = &NFS_I(data->args.inode)->flags;
pnfs_cleanup_layoutcommit(data);
- /* Matched by references in pnfs_set_layoutcommit */
- list_for_each_entry_safe(lseg, tmp, &data->lseg_list, pls_lc_list) {
- list_del_init(&lseg->pls_lc_list);
- if (test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT,
- &lseg->pls_flags))
- pnfs_put_lseg(lseg);
- }
-
- clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
- smp_mb__after_clear_bit();
- wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
-
put_rpccred(data->cred);
kfree(data);
}
lo_seg_intersecting(lseg_range, recall_range);
}
+static bool pnfs_lseg_dec_and_remove_zero(struct pnfs_layout_segment *lseg,
+ struct list_head *tmp_list)
+{
+ if (!atomic_dec_and_test(&lseg->pls_refcount))
+ return false;
+ pnfs_layout_remove_lseg(lseg->pls_layout, lseg);
+ list_add(&lseg->pls_list, tmp_list);
+ return true;
+}
+
/* Returns 1 if lseg is removed from list, 0 otherwise */
static int mark_lseg_invalid(struct pnfs_layout_segment *lseg,
struct list_head *tmp_list)
*/
dprintk("%s: lseg %p ref %d\n", __func__, lseg,
atomic_read(&lseg->pls_refcount));
- if (atomic_dec_and_test(&lseg->pls_refcount)) {
- pnfs_layout_remove_lseg(lseg->pls_layout, lseg);
- list_add(&lseg->pls_list, tmp_list);
+ if (pnfs_lseg_dec_and_remove_zero(lseg, tmp_list))
rv = 1;
- }
}
return rv;
}
return lseg;
}
+static void pnfs_clear_layoutcommit(struct inode *inode,
+ struct list_head *head)
+{
+ struct nfs_inode *nfsi = NFS_I(inode);
+ struct pnfs_layout_segment *lseg, *tmp;
+
+ if (!test_and_clear_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags))
+ return;
+ list_for_each_entry_safe(lseg, tmp, &nfsi->layout->plh_segs, pls_list) {
+ if (!test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ continue;
+ pnfs_lseg_dec_and_remove_zero(lseg, head);
+ }
+}
+
/*
* Initiates a LAYOUTRETURN(FILE), and removes the pnfs_layout_hdr
* when the layout segment list is empty.
/* Reference matched in nfs4_layoutreturn_release */
pnfs_get_layout_hdr(lo);
empty = list_empty(&lo->plh_segs);
+ pnfs_clear_layoutcommit(ino, &tmp_list);
pnfs_mark_matching_lsegs_invalid(lo, &tmp_list, NULL);
/* Don't send a LAYOUTRETURN if list was initially empty */
if (empty) {
spin_unlock(&ino->i_lock);
pnfs_free_lseg_list(&tmp_list);
- WARN_ON(test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags));
-
lrp = kzalloc(sizeof(*lrp), GFP_KERNEL);
if (unlikely(lrp == NULL)) {
status = -ENOMEM;
}
EXPORT_SYMBOL_GPL(_pnfs_return_layout);
+int
+pnfs_commit_and_return_layout(struct inode *inode)
+{
+ struct pnfs_layout_hdr *lo;
+ int ret;
+
+ spin_lock(&inode->i_lock);
+ lo = NFS_I(inode)->layout;
+ if (lo == NULL) {
+ spin_unlock(&inode->i_lock);
+ return 0;
+ }
+ pnfs_get_layout_hdr(lo);
+ /* Block new layoutgets and read/write to ds */
+ lo->plh_block_lgets++;
+ spin_unlock(&inode->i_lock);
+ filemap_fdatawait(inode->i_mapping);
+ ret = pnfs_layoutcommit_inode(inode, true);
+ if (ret == 0)
+ ret = _pnfs_return_layout(inode);
+ spin_lock(&inode->i_lock);
+ lo->plh_block_lgets--;
+ spin_unlock(&inode->i_lock);
+ pnfs_put_layout_hdr(lo);
+ return ret;
+}
+
bool pnfs_roc(struct inode *ino)
{
struct pnfs_layout_hdr *lo;
dprintk("pnfs write error = %d\n", hdr->pnfs_error);
if (NFS_SERVER(hdr->inode)->pnfs_curr_ld->flags &
PNFS_LAYOUTRET_ON_ERROR) {
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(hdr->inode)->flags);
pnfs_return_layout(hdr->inode);
}
if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags))
dprintk("pnfs read error = %d\n", hdr->pnfs_error);
if (NFS_SERVER(hdr->inode)->pnfs_curr_ld->flags &
PNFS_LAYOUTRET_ON_ERROR) {
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(hdr->inode)->flags);
pnfs_return_layout(hdr->inode);
}
if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags))
list_for_each_entry(lseg, &NFS_I(inode)->layout->plh_segs, pls_list) {
if (lseg->pls_range.iomode == IOMODE_RW &&
- test_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
+ test_and_clear_bit(NFS_LSEG_LAYOUTCOMMIT, &lseg->pls_flags))
list_add(&lseg->pls_lc_list, listp);
}
}
+static void pnfs_list_write_lseg_done(struct inode *inode, struct list_head *listp)
+{
+ struct pnfs_layout_segment *lseg, *tmp;
+ unsigned long *bitlock = &NFS_I(inode)->flags;
+
+ /* Matched by references in pnfs_set_layoutcommit */
+ list_for_each_entry_safe(lseg, tmp, listp, pls_lc_list) {
+ list_del_init(&lseg->pls_lc_list);
+ pnfs_put_lseg(lseg);
+ }
+
+ clear_bit_unlock(NFS_INO_LAYOUTCOMMITTING, bitlock);
+ smp_mb__after_clear_bit();
+ wake_up_bit(bitlock, NFS_INO_LAYOUTCOMMITTING);
+}
+
void pnfs_set_lo_fail(struct pnfs_layout_segment *lseg)
{
pnfs_layout_io_set_failed(lseg->pls_layout, lseg->pls_range.iomode);
if (nfss->pnfs_curr_ld->cleanup_layoutcommit)
nfss->pnfs_curr_ld->cleanup_layoutcommit(data);
+ pnfs_list_write_lseg_done(data->args.inode, &data->lseg_list);
}
/*
void pnfs_cleanup_layoutcommit(struct nfs4_layoutcommit_data *data);
int pnfs_layoutcommit_inode(struct inode *inode, bool sync);
int _pnfs_return_layout(struct inode *);
+int pnfs_commit_and_return_layout(struct inode *);
void pnfs_ld_write_done(struct nfs_write_data *);
void pnfs_ld_read_done(struct nfs_read_data *);
struct pnfs_layout_segment *pnfs_update_layout(struct inode *ino,
return 0;
}
+static inline int pnfs_commit_and_return_layout(struct inode *inode)
+{
+ return 0;
+}
+
static inline bool
pnfs_ld_layoutret_on_setattr(struct inode *inode)
{
{
if (rp->c_type == RC_REPLBUFF)
kfree(rp->c_replvec.iov_base);
- hlist_del(&rp->c_hash);
+ if (!hlist_unhashed(&rp->c_hash))
+ hlist_del(&rp->c_hash);
list_del(&rp->c_lru);
--num_drc_entries;
kmem_cache_free(drc_slab, rp);
int nfsd_reply_cache_init(void)
{
+ INIT_LIST_HEAD(&lru_head);
+ max_drc_entries = nfsd_cache_size_limit();
+ num_drc_entries = 0;
+
register_shrinker(&nfsd_reply_cache_shrinker);
drc_slab = kmem_cache_create("nfsd_drc", sizeof(struct svc_cacherep),
0, 0, NULL);
if (!cache_hash)
goto out_nomem;
- INIT_LIST_HEAD(&lru_head);
- max_drc_entries = nfsd_cache_size_limit();
- num_drc_entries = 0;
-
return 0;
out_nomem:
printk(KERN_ERR "nfsd: failed to allocate reply cache\n");
int host_err;
int stable = *stablep;
int use_wgather;
+ loff_t pos = offset;
dentry = file->f_path.dentry;
inode = dentry->d_inode;
/* Write the data. */
oldfs = get_fs(); set_fs(KERNEL_DS);
- host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
+ host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &pos);
set_fs(oldfs);
if (host_err < 0)
goto out_nfserr;
#include <linux/mnt_namespace.h>
#include <linux/mount.h>
#include <linux/fs.h>
+#include <linux/nsproxy.h>
#include "internal.h"
#include "pnode.h"
int propagate_mnt(struct mount *dest_mnt, struct dentry *dest_dentry,
struct mount *source_mnt, struct list_head *tree_list)
{
+ struct user_namespace *user_ns = current->nsproxy->mnt_ns->user_ns;
struct mount *m, *child;
int ret = 0;
struct mount *prev_dest_mnt = dest_mnt;
source = get_source(m, prev_dest_mnt, prev_src_mnt, &type);
+ /* Notice when we are propagating across user namespaces */
+ if (m->mnt_ns->user_ns != user_ns)
+ type |= CL_UNPRIVILEGED;
+
child = copy_tree(source, source->mnt.mnt_root, type);
if (IS_ERR(child)) {
ret = PTR_ERR(child);
#define CL_MAKE_SHARED 0x08
#define CL_PRIVATE 0x10
#define CL_SHARED_TO_SLAVE 0x20
+#define CL_UNPRIVILEGED 0x40
static inline void set_mnt_shared(struct mount *mnt)
{
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/user_namespace.h>
#include <linux/mount.h>
#include <linux/pid_namespace.h>
#include <linux/parser.h>
} else {
ns = task_active_pid_ns(current);
options = data;
+
+ if (!current_user_ns()->may_mount_proc)
+ return ERR_PTR(-EPERM);
}
sb = sget(fs_type, proc_test_super, proc_set_super, flags, ns);
#include <linux/splice.h>
#include <linux/compat.h>
#include "read_write.h"
+#include "internal.h"
#include <asm/uaccess.h>
#include <asm/unistd.h>
EXPORT_SYMBOL(do_sync_write);
+ssize_t __kernel_write(struct file *file, const char *buf, size_t count, loff_t *pos)
+{
+ mm_segment_t old_fs;
+ const char __user *p;
+ ssize_t ret;
+
+ if (!file->f_op || (!file->f_op->write && !file->f_op->aio_write))
+ return -EINVAL;
+
+ old_fs = get_fs();
+ set_fs(get_ds());
+ p = (__force const char __user *)buf;
+ if (count > MAX_RW_COUNT)
+ count = MAX_RW_COUNT;
+ if (file->f_op->write)
+ ret = file->f_op->write(file, p, count, pos);
+ else
+ ret = do_sync_write(file, p, count, pos);
+ set_fs(old_fs);
+ if (ret > 0) {
+ fsnotify_modify(file);
+ add_wchar(current, ret);
+ }
+ inc_syscw(current);
+ return ret;
+}
+
ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_t *pos)
{
ssize_t ret;
#include <linux/security.h>
#include <linux/gfp.h>
#include <linux/socket.h>
+#include "internal.h"
/*
* Attempt to steal a page from a pipe buffer. This should perhaps go into
{
int ret;
void *data;
+ loff_t tmp = sd->pos;
data = buf->ops->map(pipe, buf, 0);
- ret = kernel_write(sd->u.file, data + buf->offset, sd->len, sd->pos);
+ ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
buf->ops->unmap(pipe, buf, data);
return ret;
ino = parent_sd->s_ino;
if (filldir(dirent, ".", 1, filp->f_pos, ino, DT_DIR) == 0)
filp->f_pos++;
+ else
+ return 0;
}
if (filp->f_pos == 1) {
if (parent_sd->s_parent)
ino = parent_sd->s_ino;
if (filldir(dirent, "..", 2, filp->f_pos, ino, DT_DIR) == 0)
filp->f_pos++;
+ else
+ return 0;
}
mutex_lock(&sysfs_mutex);
for (pos = sysfs_dir_pos(ns, parent_sd, filp->f_pos, pos);
return 0;
}
+static loff_t sysfs_dir_llseek(struct file *file, loff_t offset, int whence)
+{
+ struct inode *inode = file_inode(file);
+ loff_t ret;
+
+ mutex_lock(&inode->i_mutex);
+ ret = generic_file_llseek(file, offset, whence);
+ mutex_unlock(&inode->i_mutex);
+
+ return ret;
+}
const struct file_operations sysfs_dir_operations = {
.read = generic_read_dir,
.readdir = sysfs_readdir,
.release = sysfs_dir_release,
- .llseek = generic_file_llseek,
+ .llseek = sysfs_dir_llseek,
};
#include <linux/module.h>
#include <linux/magic.h>
#include <linux/slab.h>
+#include <linux/user_namespace.h>
#include "sysfs.h"
struct super_block *sb;
int error;
+ if (!(flags & MS_KERNMOUNT) && !current_user_ns()->may_mount_sysfs)
+ return ERR_PTR(-EPERM);
+
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return ERR_PTR(-ENOMEM);
}, \
.reg = _reg, \
.shift = _shift, \
- .width = _width, \
+ .mask = BIT(_width) - 1, \
.flags = _mux_flags, \
.lock = _lock, \
}; \
* undo any work done in the @prepare callback. Called with
* prepare_lock held.
*
+ * @is_prepared: Queries the hardware to determine if the clock is prepared.
+ * This function is allowed to sleep. Optional, if this op is not
+ * set then the prepare count will be used.
+ *
+ * @unprepare_unused: Unprepare the clock atomically. Only called from
+ * clk_disable_unused for prepare clocks with special needs.
+ * Called with prepare mutex held. This function may sleep.
+ *
* @enable: Enable the clock atomically. This must not return until the
* clock is generating a valid clock signal, usable by consumer
* devices. Called with enable_lock held. This function must not
struct clk_ops {
int (*prepare)(struct clk_hw *hw);
void (*unprepare)(struct clk_hw *hw);
+ int (*is_prepared)(struct clk_hw *hw);
+ void (*unprepare_unused)(struct clk_hw *hw);
int (*enable)(struct clk_hw *hw);
void (*disable)(struct clk_hw *hw);
int (*is_enabled)(struct clk_hw *hw);
struct clk_mux {
struct clk_hw hw;
void __iomem *reg;
+ u32 *table;
+ u32 mask;
u8 shift;
- u8 width;
u8 flags;
spinlock_t *lock;
};
#define CLK_MUX_INDEX_BIT BIT(1)
extern const struct clk_ops clk_mux_ops;
+
struct clk *clk_register_mux(struct device *dev, const char *name,
const char **parent_names, u8 num_parents, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
u8 clk_mux_flags, spinlock_t *lock);
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
+ const char **parent_names, u8 num_parents, unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+
/**
* struct clk_fixed_factor - fixed multiplier and divider clock
*
const char *parent_name, unsigned long flags,
unsigned int mult, unsigned int div);
+/***
+ * struct clk_composite - aggregate clock of mux, divider and gate clocks
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @mux_hw: handle between composite and hardware-specifix mux clock
+ * @div_hw: handle between composite and hardware-specifix divider clock
+ * @gate_hw: handle between composite and hardware-specifix gate clock
+ * @mux_ops: clock ops for mux
+ * @div_ops: clock ops for divider
+ * @gate_ops: clock ops for gate
+ */
+struct clk_composite {
+ struct clk_hw hw;
+ struct clk_ops ops;
+
+ struct clk_hw *mux_hw;
+ struct clk_hw *div_hw;
+ struct clk_hw *gate_hw;
+
+ const struct clk_ops *mux_ops;
+ const struct clk_ops *div_ops;
+ const struct clk_ops *gate_ops;
+};
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+ const char **parent_names, int num_parents,
+ struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+ struct clk_hw *div_hw, const struct clk_ops *div_ops,
+ struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+ unsigned long flags);
+
/**
* clk_register - allocate a new clock, register it and return an opaque cookie
* @dev: device that is registering this clock
unsigned int __clk_get_prepare_count(struct clk *clk);
unsigned long __clk_get_rate(struct clk *clk);
unsigned long __clk_get_flags(struct clk *clk);
+bool __clk_is_prepared(struct clk *clk);
bool __clk_is_enabled(struct clk *clk);
struct clk *__clk_lookup(const char *name);
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_CLK_MXS_H
+#define __LINUX_CLK_MXS_H
+
+int mx23_clocks_init(void);
+int mx28_clocks_init(void);
+int mxs_saif_clkmux_select(unsigned int clkmux);
+
+#endif
--- /dev/null
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+void __init sunxi_init_clocks(void);
+
+#endif
void tegra_periph_reset_deassert(struct clk *c);
void tegra_periph_reset_assert(struct clk *c);
void tegra_clocks_init(void);
+void tegra_clocks_apply_init_table(void);
#endif /* __LINUX_CLK_TEGRA_H_ */
__used __section(__clksrc_of_table) \
= { .compatible = compat, .data = fn };
#else
+static inline void clocksource_of_init(void) {}
#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
#endif
extern void debug_show_all_locks(void);
extern void debug_show_held_locks(struct task_struct *task);
extern void debug_check_no_locks_freed(const void *from, unsigned long len);
-extern void debug_check_no_locks_held(void);
+extern void debug_check_no_locks_held(struct task_struct *task);
#else
static inline void debug_show_all_locks(void)
{
}
static inline void
-debug_check_no_locks_held(void)
+debug_check_no_locks_held(struct task_struct *task)
{
}
#endif
#ifndef FREEZER_H_INCLUDED
#define FREEZER_H_INCLUDED
-#include <linux/debug_locks.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/atomic.h>
static inline bool try_to_freeze(void)
{
- if (!(current->flags & PF_NOFREEZE))
- debug_check_no_locks_held();
might_sleep();
if (likely(!freezing(current)))
return false;
spin_unlock(&fs->lock);
}
+extern bool current_chrooted(void);
+
#endif /* _LINUX_FS_STRUCT_H */
--- /dev/null
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IRQCHIP_MXS_H
+#define __LINUX_IRQCHIP_MXS_H
+
+extern void icoll_handle_irq(struct pt_regs *);
+
+#endif
MAX77693_MUIC_REG_END,
};
+/* MAX77693 INTMASK1~2 Register */
+#define INTMASK1_ADC1K_SHIFT 3
+#define INTMASK1_ADCERR_SHIFT 2
+#define INTMASK1_ADCLOW_SHIFT 1
+#define INTMASK1_ADC_SHIFT 0
+#define INTMASK1_ADC1K_MASK (1 << INTMASK1_ADC1K_SHIFT)
+#define INTMASK1_ADCERR_MASK (1 << INTMASK1_ADCERR_SHIFT)
+#define INTMASK1_ADCLOW_MASK (1 << INTMASK1_ADCLOW_SHIFT)
+#define INTMASK1_ADC_MASK (1 << INTMASK1_ADC_SHIFT)
+
+#define INTMASK2_VIDRM_SHIFT 5
+#define INTMASK2_VBVOLT_SHIFT 4
+#define INTMASK2_DXOVP_SHIFT 3
+#define INTMASK2_DCDTMR_SHIFT 2
+#define INTMASK2_CHGDETRUN_SHIFT 1
+#define INTMASK2_CHGTYP_SHIFT 0
+#define INTMASK2_VIDRM_MASK (1 << INTMASK2_VIDRM_SHIFT)
+#define INTMASK2_VBVOLT_MASK (1 << INTMASK2_VBVOLT_SHIFT)
+#define INTMASK2_DXOVP_MASK (1 << INTMASK2_DXOVP_SHIFT)
+#define INTMASK2_DCDTMR_MASK (1 << INTMASK2_DCDTMR_SHIFT)
+#define INTMASK2_CHGDETRUN_MASK (1 << INTMASK2_CHGDETRUN_SHIFT)
+#define INTMASK2_CHGTYP_MASK (1 << INTMASK2_CHGTYP_SHIFT)
+
/* MAX77693 MUIC - STATUS1~3 Register */
#define STATUS1_ADC_SHIFT (0)
#define STATUS1_ADCLOW_SHIFT (5)
#define VM_PFNMAP 0x00000400 /* Page-ranges managed without "struct page", just pure PFN */
#define VM_DENYWRITE 0x00000800 /* ETXTBSY on write attempts.. */
-#define VM_POPULATE 0x00001000
#define VM_LOCKED 0x00002000
#define VM_IO 0x00004000 /* Memory mapped I/O or similar */
{
return _calc_vm_trans(flags, MAP_GROWSDOWN, VM_GROWSDOWN ) |
_calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) |
- ((flags & MAP_LOCKED) ? (VM_LOCKED | VM_POPULATE) : 0) |
- (((flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE) ?
- VM_POPULATE : 0);
+ _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED );
}
#endif /* _LINUX_MMAN_H */
#define MNT_INTERNAL 0x4000
+#define MNT_LOCK_READONLY 0x400000
+
struct vfsmount {
struct dentry *mnt_root; /* root of the mounted tree */
struct super_block *mnt_sb; /* pointer to superblock */
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __LINUX_MXSFB_H
-#define __LINUX_MXSFB_H
-
-#include <linux/fb.h>
-
-#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */
-#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
-#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
-#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-
-#define FB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
-#define FB_SYNC_DOTCLK_FAILING_ACT (1 << 7) /* failing/negtive edge sampling */
-
-struct mxsfb_platform_data {
- struct fb_videomode *mode_list;
- unsigned mode_count;
-
- unsigned default_bpp;
-
- unsigned dotclk_delay; /* refer manual HW_LCDIF_VDCTRL4 register */
- unsigned ld_intf_width; /* refer STMLCDIF_* macros */
-
- unsigned fb_size; /* Size of the video memory. If zero a
- * default will be used
- */
- unsigned long fb_phys; /* physical address for the video memory. If
- * zero the framebuffer memory will be dynamically
- * allocated. If specified,fb_size must also be specified.
- * fb_phys must be unused by Linux.
- */
-};
-
-#endif /* __LINUX_MXSFB_H */
#ifndef __LINUX_SPI_MXS_SPI_H__
#define __LINUX_SPI_MXS_SPI_H__
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
unsigned int clk_rate;
enum mxs_ssp_id devid;
- int dma_channel;
struct dma_chan *dmach;
- struct mxs_dma_data dma_data;
unsigned int dma_dir;
enum dma_transfer_direction slave_dirn;
u32 ssp_pio_words[SSP_PIO_NUM];
/* Adding event notification support elements */
#define THERMAL_GENL_FAMILY_NAME "thermal_event"
#define THERMAL_GENL_VERSION 0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group"
+#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_grp"
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
* For encapsulation sockets.
*/
int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+ void (*encap_destroy)(struct sock *sk);
};
static inline struct udp_sock *udp_sk(const struct sock *sk)
*/
int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
struct usb_device *, enum usb3_link_state state);
+ int (*find_raw_port_number)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
struct platform_device;
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
struct nop_usb_xceiv_platform_data {
enum usb_phy_type type;
+ unsigned long clk_rate;
+
+ /* if set fails with -EPROBE_DEFER if can't get regulator */
+ unsigned int needs_vcc:1;
+ unsigned int needs_reset:1;
};
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
kuid_t owner;
kgid_t group;
unsigned int proc_inum;
+ bool may_mount_sysfs;
+ bool may_mount_proc;
};
extern struct user_namespace init_user_ns;
#endif
+void update_mnt_policy(struct user_namespace *userns);
+
#endif /* _LINUX_USER_H */
__be32 ports;
__be16 port16[2];
};
+ u16 thoff;
u8 ip_proto;
};
int sysctl_sync_retries;
int sysctl_nat_icmp_send;
int sysctl_pmtu_disc;
+ int sysctl_backup_only;
/* ip_vs_lblc */
int sysctl_lblc_expiration;
return ipvs->sysctl_pmtu_disc;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return ipvs->sync_state & IP_VS_STATE_BACKUP &&
+ ipvs->sysctl_backup_only;
+}
+
#else
static inline int sysctl_sync_threshold(struct netns_ipvs *ipvs)
return 1;
}
+static inline int sysctl_backup_only(struct netns_ipvs *ipvs)
+{
+ return 0;
+}
+
#endif
/*
{
struct iphdr *iph = ip_hdr(skb);
- if (iph->frag_off & htons(IP_DF))
- iph->id = 0;
- else {
- /* Use inner packet iph-id if possible. */
- if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
- iph->id = old_iph->id;
- else
- __ip_select_ident(iph, dst,
- (skb_shinfo(skb)->gso_segs ?: 1) - 1);
- }
+ /* Use inner packet iph-id if possible. */
+ if (skb->protocol == htons(ETH_P_IP) && old_iph->id)
+ iph->id = old_iph->id;
+ else
+ __ip_select_ident(iph, dst,
+ (skb_shinfo(skb)->gso_segs ?: 1) - 1);
}
#endif
PACKET_DIAG_TX_RING,
PACKET_DIAG_FANOUT,
- PACKET_DIAG_MAX,
+ __PACKET_DIAG_MAX,
};
+#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1)
+
struct packet_diag_info {
__u32 pdi_index;
__u32 pdi_version;
UNIX_DIAG_MEMINFO,
UNIX_DIAG_SHUTDOWN,
- UNIX_DIAG_MAX,
+ __UNIX_DIAG_MAX,
};
+#define UNIX_DIAG_MAX (__UNIX_DIAG_MAX - 1)
+
struct unix_diag_vfs {
__u32 udiag_vfs_ino;
__u32 udiag_vfs_dev;
uint8_t _pad3;
} __attribute__((__packed__));
+struct blkif_request_other {
+ uint8_t _pad1;
+ blkif_vdev_t _pad2; /* only for read/write requests */
+#ifdef CONFIG_X86_64
+ uint32_t _pad3; /* offsetof(blkif_req..,u.other.id)==8*/
+#endif
+ uint64_t id; /* private guest value, echoed in resp */
+} __attribute__((__packed__));
+
struct blkif_request {
uint8_t operation; /* BLKIF_OP_??? */
union {
struct blkif_request_rw rw;
struct blkif_request_discard discard;
+ struct blkif_request_other other;
} u;
} __attribute__((__packed__));
#define PHYSDEVOP_pci_device_remove 26
#define PHYSDEVOP_restore_msi_ext 27
+/*
+ * Dom0 should use these two to announce MMIO resources assigned to
+ * MSI-X capable devices won't (prepare) or may (release) change.
+ */
+#define PHYSDEVOP_prepare_msix 30
+#define PHYSDEVOP_release_msix 31
struct physdev_pci_device {
/* IN */
uint16_t seg;
int flags, const char *dev_name,
void *data)
{
- if (!(flags & MS_KERNMOUNT))
- data = current->nsproxy->ipc_ns;
+ if (!(flags & MS_KERNMOUNT)) {
+ struct ipc_namespace *ns = current->nsproxy->ipc_ns;
+ /* Don't allow mounting unless the caller has CAP_SYS_ADMIN
+ * over the ipc namespace.
+ */
+ if (!ns_capable(ns->user_ns, CAP_SYS_ADMIN))
+ return ERR_PTR(-EPERM);
+
+ data = ns;
+ }
return mount_ns(fs_type, flags, data, mqueue_fill_super);
}
/*
* Make sure we are holding no locks:
*/
- debug_check_no_locks_held();
+ debug_check_no_locks_held(tsk);
/*
* We can do this unlocked here. The futex code uses this flag
* just to verify whether the pi state cleanup has been done
}
EXPORT_SYMBOL_GPL(debug_check_no_locks_freed);
-static void print_held_locks_bug(void)
+static void print_held_locks_bug(struct task_struct *curr)
{
if (!debug_locks_off())
return;
printk("\n");
printk("=====================================\n");
- printk("[ BUG: %s/%d still has locks held! ]\n",
- current->comm, task_pid_nr(current));
+ printk("[ BUG: lock held at task exit time! ]\n");
print_kernel_ident();
printk("-------------------------------------\n");
- lockdep_print_held_locks(current);
+ printk("%s/%d is exiting with locks still held!\n",
+ curr->comm, task_pid_nr(curr));
+ lockdep_print_held_locks(curr);
+
printk("\nstack backtrace:\n");
dump_stack();
}
-void debug_check_no_locks_held(void)
+void debug_check_no_locks_held(struct task_struct *task)
{
- if (unlikely(current->lockdep_depth > 0))
- print_held_locks_bug();
+ if (unlikely(task->lockdep_depth > 0))
+ print_held_locks_bug(task);
}
-EXPORT_SYMBOL_GPL(debug_check_no_locks_held);
void debug_show_all_locks(void)
{
int nr;
int rc;
struct task_struct *task, *me = current;
+ int init_pids = thread_group_leader(me) ? 1 : 2;
/* Don't allow any more processes into the pid namespace */
disable_pid_allocation(pid_ns);
*/
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (pid_ns->nr_hashed == 1)
+ if (pid_ns->nr_hashed == init_pids)
break;
schedule();
}
*/
int tick_check_broadcast_device(struct clock_event_device *dev)
{
- if ((tick_broadcast_device.evtdev &&
+ if ((dev->features & CLOCK_EVT_FEAT_DUMMY) ||
+ (tick_broadcast_device.evtdev &&
tick_broadcast_device.evtdev->rating >= dev->rating) ||
(dev->features & CLOCK_EVT_FEAT_C3STOP))
return 0;
.owner = GLOBAL_ROOT_UID,
.group = GLOBAL_ROOT_GID,
.proc_inum = PROC_USER_INIT_INO,
+ .may_mount_sysfs = true,
+ .may_mount_proc = true,
};
EXPORT_SYMBOL_GPL(init_user_ns);
kgid_t group = new->egid;
int ret;
+ /*
+ * Verify that we can not violate the policy of which files
+ * may be accessed that is specified by the root directory,
+ * by verifing that the root directory is at the root of the
+ * mount namespace which allows all files to be accessed.
+ */
+ if (current_chrooted())
+ return -EPERM;
+
/* The creator needs a mapping in the parent user namespace
* or else we won't be able to reasonably tell userspace who
* created a user_namespace.
set_cred_user_ns(new, ns);
+ update_mnt_policy(ns);
+
return 0;
}
unsigned long addr;
struct file *file = get_file(vma->vm_file);
- vm_flags = vma->vm_flags;
- if (!(flags & MAP_NONBLOCK))
- vm_flags |= VM_POPULATE;
- addr = mmap_region(file, start, size, vm_flags, pgoff);
+ addr = mmap_region(file, start, size,
+ vma->vm_flags, pgoff);
fput(file);
if (IS_ERR_VALUE(addr)) {
err = addr;
mutex_unlock(&mapping->i_mmap_mutex);
}
- if (!(flags & MAP_NONBLOCK) && !(vma->vm_flags & VM_POPULATE)) {
- if (!has_write_lock)
- goto get_write_lock;
- vma->vm_flags |= VM_POPULATE;
- }
-
if (vma->vm_flags & VM_LOCKED) {
/*
* drop PG_Mlocked flag for over-mapped range
newflags = vma->vm_flags & ~VM_LOCKED;
if (on)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
tmp = vma->vm_end;
if (tmp > end)
* range with the first VMA. Also, skip undesirable VMA types.
*/
nend = min(end, vma->vm_end);
- if ((vma->vm_flags & (VM_IO | VM_PFNMAP | VM_POPULATE)) !=
- VM_POPULATE)
+ if (vma->vm_flags & (VM_IO | VM_PFNMAP))
continue;
if (nstart < vma->vm_start)
nstart = vma->vm_start;
struct vm_area_struct * vma, * prev = NULL;
if (flags & MCL_FUTURE)
- current->mm->def_flags |= VM_LOCKED | VM_POPULATE;
+ current->mm->def_flags |= VM_LOCKED;
else
- current->mm->def_flags &= ~(VM_LOCKED | VM_POPULATE);
+ current->mm->def_flags &= ~VM_LOCKED;
if (flags == MCL_FUTURE)
goto out;
newflags = vma->vm_flags & ~VM_LOCKED;
if (flags & MCL_CURRENT)
- newflags |= VM_LOCKED | VM_POPULATE;
+ newflags |= VM_LOCKED;
/* Ignore errors */
mlock_fixup(vma, &prev, vma->vm_start, vma->vm_end, newflags);
}
addr = mmap_region(file, addr, len, vm_flags, pgoff);
- if (!IS_ERR_VALUE(addr) && (vm_flags & VM_POPULATE))
+ if (!IS_ERR_VALUE(addr) &&
+ ((vm_flags & VM_LOCKED) ||
+ (flags & (MAP_POPULATE | MAP_NONBLOCK)) == MAP_POPULATE))
*populate = len;
return addr;
}
grp = &vlan_info->grp;
- /* Take it out of our own structures, but be sure to interlock with
- * HW accelerating devices or SW vlan input packet processing if
- * VLAN is not 0 (leave it there for 802.1p).
- */
- if (vlan_id)
- vlan_vid_del(real_dev, vlan_id);
-
grp->nr_vlan_devs--;
if (vlan->flags & VLAN_FLAG_MVRP)
vlan_gvrp_uninit_applicant(real_dev);
}
+ /* Take it out of our own structures, but be sure to interlock with
+ * HW accelerating devices or SW vlan input packet processing if
+ * VLAN is not 0 (leave it there for 802.1p).
+ */
+ if (vlan_id)
+ vlan_vid_del(real_dev, vlan_id);
+
/* Get rid of the vlan's reference to real_dev */
dev_put(real_dev);
}
sco_chan_del(sk, ECONNRESET);
break;
+ case BT_CONNECT2:
case BT_CONNECT:
case BT_DISCONN:
sco_chan_del(sk, ECONNRESET);
return 0;
br_warn(br, "adding interface %s with same address "
"as a received packet\n",
- source->dev->name);
+ source ? source->dev->name : br->dev->name);
fdb_delete(br, fdb);
}
return;
}
#endif
- WARN_ON(in_interrupt());
static_key_slow_inc(&netstamp_needed);
}
EXPORT_SYMBOL(net_enable_timestamp);
flow->ports = *ports;
}
+ flow->thoff = (u16) nhoff;
+
return true;
}
EXPORT_SYMBOL(skb_flow_dissect);
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/security.h>
+#include <linux/pid_namespace.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
#include <linux/slab.h>
if (!uid_valid(uid) || !gid_valid(gid))
return -EINVAL;
- if ((creds->pid == task_tgid_vnr(current) || nsown_capable(CAP_SYS_ADMIN)) &&
+ if ((creds->pid == task_tgid_vnr(current) ||
+ ns_capable(current->nsproxy->pid_ns->user_ns, CAP_SYS_ADMIN)) &&
((uid_eq(uid, cred->uid) || uid_eq(uid, cred->euid) ||
uid_eq(uid, cred->suid)) || nsown_capable(CAP_SETUID)) &&
((gid_eq(gid, cred->gid) || gid_eq(gid, cred->egid) ||
iph->frag_off |= htons(IP_MF);
offset += (skb->len - skb->mac_len - iph->ihl * 4);
} else {
- if (!(iph->frag_off & htons(IP_DF)))
- iph->id = htons(id++);
+ iph->id = htons(id++);
}
iph->tot_len = htons(skb->len - skb->mac_len);
iph->check = 0;
}
for (i++; i < CONF_NAMESERVERS_MAX; i++)
if (ic_nameservers[i] != NONE)
- pr_cont(", nameserver%u=%pI4\n", i, &ic_nameservers[i]);
+ pr_cont(", nameserver%u=%pI4", i, &ic_nameservers[i]);
+ pr_cont("\n");
#endif /* !SILENT */
return 0;
If unsure, say Y.
-config IP_NF_QUEUE
- tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
- depends on NETFILTER_ADVANCED
- help
- Netfilter has the ability to queue packets to user space: the
- netlink device can be used to access them using this driver.
-
- This option enables the old IPv4-only "ip_queue" implementation
- which has been obsoleted by the new "nfnetlink_queue" code (see
- CONFIG_NETFILTER_NETLINK_QUEUE).
-
- To compile it as a module, choose M here. If unsure, say N.
-
config IP_NF_IPTABLES
tristate "IP tables support (required for filtering/masq/NAT)"
default m if NETFILTER_ADVANCED=n
if (tcp_is_reno(tp))
tcp_reset_reno_sack(tp);
- if (!how) {
- /* Push undo marker, if it was plain RTO and nothing
- * was retransmitted. */
- tp->undo_marker = tp->snd_una;
- } else {
+ tp->undo_marker = tp->snd_una;
+ if (how) {
tp->sacked_out = 0;
tp->fackets_out = 0;
}
goto send_now;
}
- /* Ok, it looks like it is advisable to defer. */
- tp->tso_deferred = 1 | (jiffies << 1);
+ /* Ok, it looks like it is advisable to defer.
+ * Do not rearm the timer if already set to not break TCP ACK clocking.
+ */
+ if (!tp->tso_deferred)
+ tp->tso_deferred = 1 | (jiffies << 1);
return true;
void udp_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
bool slow = lock_sock_fast(sk);
udp_flush_pending_frames(sk);
unlock_sock_fast(sk, slow);
+ if (static_key_false(&udp_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
}
/*
static int __net_init addrconf_init_net(struct net *net)
{
- int err;
+ int err = -ENOMEM;
struct ipv6_devconf *all, *dflt;
- err = -ENOMEM;
- all = &ipv6_devconf;
- dflt = &ipv6_devconf_dflt;
+ all = kmemdup(&ipv6_devconf, sizeof(ipv6_devconf), GFP_KERNEL);
+ if (all == NULL)
+ goto err_alloc_all;
- if (!net_eq(net, &init_net)) {
- all = kmemdup(all, sizeof(ipv6_devconf), GFP_KERNEL);
- if (all == NULL)
- goto err_alloc_all;
+ dflt = kmemdup(&ipv6_devconf_dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
+ if (dflt == NULL)
+ goto err_alloc_dflt;
- dflt = kmemdup(dflt, sizeof(ipv6_devconf_dflt), GFP_KERNEL);
- if (dflt == NULL)
- goto err_alloc_dflt;
- } else {
- /* these will be inherited by all namespaces */
- dflt->autoconf = ipv6_defaults.autoconf;
- dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
- }
+ /* these will be inherited by all namespaces */
+ dflt->autoconf = ipv6_defaults.autoconf;
+ dflt->disable_ipv6 = ipv6_defaults.disable_ipv6;
net->ipv6.devconf_all = all;
net->ipv6.devconf_dflt = dflt;
static struct xt_target ip6t_npt_target_reg[] __read_mostly = {
{
.name = "SNPT",
+ .table = "mangle",
.target = ip6t_snpt_tg,
.targetsize = sizeof(struct ip6t_npt_tginfo),
.checkentry = ip6t_npt_checkentry,
},
{
.name = "DNPT",
+ .table = "mangle",
.target = ip6t_dnpt_tg,
.targetsize = sizeof(struct ip6t_npt_tginfo),
.checkentry = ip6t_npt_checkentry,
void udpv6_destroy_sock(struct sock *sk)
{
+ struct udp_sock *up = udp_sk(sk);
lock_sock(sk);
udp_v6_flush_pending_frames(sk);
release_sock(sk);
+ if (static_key_false(&udpv6_encap_needed) && up->encap_type) {
+ void (*encap_destroy)(struct sock *sk);
+ encap_destroy = ACCESS_ONCE(up->encap_destroy);
+ if (encap_destroy)
+ encap_destroy(sk);
+ }
+
inet6_destroy_sock(sk);
}
NULL, NULL, NULL);
/* Check if the we got some results */
- if (!self->cachedaddr)
- return -EAGAIN; /* Didn't find any devices */
+ if (!self->cachedaddr) {
+ err = -EAGAIN; /* Didn't find any devices */
+ goto out;
+ }
daddr = self->cachedaddr;
/* Cleanup */
self->cachedaddr = 0;
static void l2tp_session_set_header_len(struct l2tp_session *session, int version);
static void l2tp_tunnel_free(struct l2tp_tunnel *tunnel);
-static void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel);
static inline struct l2tp_net *l2tp_pernet(struct net *net)
{
} else {
/* Socket is owned by kernelspace */
sk = tunnel->sock;
+ sock_hold(sk);
}
out:
}
sock_put(sk);
}
+ sock_put(sk);
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_sock_put);
struct sk_buff *skbp;
struct sk_buff *tmp;
u32 ns = L2TP_SKB_CB(skb)->ns;
- struct l2tp_stats *sstats;
spin_lock_bh(&session->reorder_q.lock);
- sstats = &session->stats;
skb_queue_walk_safe(&session->reorder_q, skbp, tmp) {
if (L2TP_SKB_CB(skbp)->ns > ns) {
__skb_queue_before(&session->reorder_q, skbp, skb);
"%s: pkt %hu, inserted before %hu, reorder_q len=%d\n",
session->name, ns, L2TP_SKB_CB(skbp)->ns,
skb_queue_len(&session->reorder_q));
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_oos_packets++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_oos_packets);
goto out;
}
}
{
struct l2tp_tunnel *tunnel = session->tunnel;
int length = L2TP_SKB_CB(skb)->length;
- struct l2tp_stats *tstats, *sstats;
/* We're about to requeue the skb, so return resources
* to its current owner (a socket receive buffer).
*/
skb_orphan(skb);
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- sstats = &session->stats;
- u64_stats_update_begin(&sstats->syncp);
- tstats->rx_packets++;
- tstats->rx_bytes += length;
- sstats->rx_packets++;
- sstats->rx_bytes += length;
- u64_stats_update_end(&tstats->syncp);
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&tunnel->stats.rx_packets);
+ atomic_long_add(length, &tunnel->stats.rx_bytes);
+ atomic_long_inc(&session->stats.rx_packets);
+ atomic_long_add(length, &session->stats.rx_bytes);
if (L2TP_SKB_CB(skb)->has_seq) {
/* Bump our Nr */
{
struct sk_buff *skb;
struct sk_buff *tmp;
- struct l2tp_stats *sstats;
/* If the pkt at the head of the queue has the nr that we
* expect to send up next, dequeue it and any other
*/
start:
spin_lock_bh(&session->reorder_q.lock);
- sstats = &session->stats;
skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
if (time_after(jiffies, L2TP_SKB_CB(skb)->expires)) {
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- sstats->rx_errors++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
+ atomic_long_inc(&session->stats.rx_errors);
l2tp_dbg(session, L2TP_MSG_SEQ,
"%s: oos pkt %u len %d discarded (too old), waiting for %u, reorder_q_len=%d\n",
session->name, L2TP_SKB_CB(skb)->ns,
struct l2tp_tunnel *tunnel = session->tunnel;
int offset;
u32 ns, nr;
- struct l2tp_stats *sstats = &session->stats;
/* The ref count is increased since we now hold a pointer to
* the session. Take care to decrement the refcnt when exiting
"%s: cookie mismatch (%u/%u). Discarding.\n",
tunnel->name, tunnel->tunnel_id,
session->session_id);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_cookie_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_cookie_discards);
goto discard;
}
ptr += session->peer_cookie_len;
l2tp_warn(session, L2TP_MSG_SEQ,
"%s: recv data has no seq numbers when required. Discarding.\n",
session->name);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
goto discard;
}
l2tp_warn(session, L2TP_MSG_SEQ,
"%s: recv data has no seq numbers when required. Discarding.\n",
session->name);
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
goto discard;
}
}
* packets
*/
if (L2TP_SKB_CB(skb)->ns != session->nr) {
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_seq_discards++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_seq_discards);
l2tp_dbg(session, L2TP_MSG_SEQ,
"%s: oos pkt %u len %d discarded, waiting for %u, reorder_q_len=%d\n",
session->name, L2TP_SKB_CB(skb)->ns,
return;
discard:
- u64_stats_update_begin(&sstats->syncp);
- sstats->rx_errors++;
- u64_stats_update_end(&sstats->syncp);
+ atomic_long_inc(&session->stats.rx_errors);
kfree_skb(skb);
if (session->deref)
}
EXPORT_SYMBOL(l2tp_recv_common);
+/* Drop skbs from the session's reorder_q
+ */
+int l2tp_session_queue_purge(struct l2tp_session *session)
+{
+ struct sk_buff *skb = NULL;
+ BUG_ON(!session);
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ atomic_long_inc(&session->stats.rx_errors);
+ kfree_skb(skb);
+ if (session->deref)
+ (*session->deref)(session);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(l2tp_session_queue_purge);
+
/* Internal UDP receive frame. Do the real work of receiving an L2TP data frame
* here. The skb is not on a list when we get here.
* Returns 0 if the packet was a data packet and was successfully passed on.
u32 tunnel_id, session_id;
u16 version;
int length;
- struct l2tp_stats *tstats;
if (tunnel->sock && l2tp_verify_udp_checksum(tunnel->sock, skb))
goto discard_bad_csum;
discard_bad_csum:
LIMIT_NETDEBUG("%s: UDP: bad checksum\n", tunnel->name);
UDP_INC_STATS_USER(tunnel->l2tp_net, UDP_MIB_INERRORS, 0);
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- tstats->rx_errors++;
- u64_stats_update_end(&tstats->syncp);
+ atomic_long_inc(&tunnel->stats.rx_errors);
kfree_skb(skb);
return 0;
struct l2tp_tunnel *tunnel = session->tunnel;
unsigned int len = skb->len;
int error;
- struct l2tp_stats *tstats, *sstats;
/* Debug */
if (session->send_seq)
error = ip_queue_xmit(skb, fl);
/* Update stats */
- tstats = &tunnel->stats;
- u64_stats_update_begin(&tstats->syncp);
- sstats = &session->stats;
- u64_stats_update_begin(&sstats->syncp);
if (error >= 0) {
- tstats->tx_packets++;
- tstats->tx_bytes += len;
- sstats->tx_packets++;
- sstats->tx_bytes += len;
+ atomic_long_inc(&tunnel->stats.tx_packets);
+ atomic_long_add(len, &tunnel->stats.tx_bytes);
+ atomic_long_inc(&session->stats.tx_packets);
+ atomic_long_add(len, &session->stats.tx_bytes);
} else {
- tstats->tx_errors++;
- sstats->tx_errors++;
+ atomic_long_inc(&tunnel->stats.tx_errors);
+ atomic_long_inc(&session->stats.tx_errors);
}
- u64_stats_update_end(&tstats->syncp);
- u64_stats_update_end(&sstats->syncp);
return 0;
}
/* No longer an encapsulation socket. See net/ipv4/udp.c */
(udp_sk(sk))->encap_type = 0;
(udp_sk(sk))->encap_rcv = NULL;
+ (udp_sk(sk))->encap_destroy = NULL;
break;
case L2TP_ENCAPTYPE_IP:
break;
/* When the tunnel is closed, all the attached sessions need to go too.
*/
-static void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel)
+void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel)
{
int hash;
struct hlist_node *walk;
hlist_del_init(&session->hlist);
- /* Since we should hold the sock lock while
- * doing any unbinding, we need to release the
- * lock we're holding before taking that lock.
- * Hold a reference to the sock so it doesn't
- * disappear as we're jumping between locks.
- */
if (session->ref != NULL)
(*session->ref)(session);
write_unlock_bh(&tunnel->hlist_lock);
- if (tunnel->version != L2TP_HDR_VER_2) {
- struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net);
-
- spin_lock_bh(&pn->l2tp_session_hlist_lock);
- hlist_del_init_rcu(&session->global_hlist);
- spin_unlock_bh(&pn->l2tp_session_hlist_lock);
- synchronize_rcu();
- }
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
if (session->session_close != NULL)
(*session->session_close)(session);
if (session->deref != NULL)
(*session->deref)(session);
+ l2tp_session_dec_refcount(session);
+
write_lock_bh(&tunnel->hlist_lock);
/* Now restart from the beginning of this hash
}
write_unlock_bh(&tunnel->hlist_lock);
}
+EXPORT_SYMBOL_GPL(l2tp_tunnel_closeall);
+
+/* Tunnel socket destroy hook for UDP encapsulation */
+static void l2tp_udp_encap_destroy(struct sock *sk)
+{
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+}
/* Really kill the tunnel.
* Come here only when all sessions have been cleared from the tunnel.
return;
sock = sk->sk_socket;
- BUG_ON(!sock);
- /* If the tunnel socket was created directly by the kernel, use the
- * sk_* API to release the socket now. Otherwise go through the
- * inet_* layer to shut the socket down, and let userspace close it.
+ /* If the tunnel socket was created by userspace, then go through the
+ * inet layer to shut the socket down, and let userspace close it.
+ * Otherwise, if we created the socket directly within the kernel, use
+ * the sk API to release it here.
* In either case the tunnel resources are freed in the socket
* destructor when the tunnel socket goes away.
*/
- if (sock->file == NULL) {
- kernel_sock_shutdown(sock, SHUT_RDWR);
- sk_release_kernel(sk);
+ if (tunnel->fd >= 0) {
+ if (sock)
+ inet_shutdown(sock, 2);
} else {
- inet_shutdown(sock, 2);
+ if (sock)
+ kernel_sock_shutdown(sock, SHUT_RDWR);
+ sk_release_kernel(sk);
}
l2tp_tunnel_sock_put(sk);
/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
udp_sk(sk)->encap_type = UDP_ENCAP_L2TPINUDP;
udp_sk(sk)->encap_rcv = l2tp_udp_encap_recv;
+ udp_sk(sk)->encap_destroy = l2tp_udp_encap_destroy;
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == PF_INET6)
udpv6_encap_enable();
*/
int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel)
{
+ l2tp_tunnel_closeall(tunnel);
return (false == queue_work(l2tp_wq, &tunnel->del_work));
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_delete);
*/
void l2tp_session_free(struct l2tp_session *session)
{
- struct l2tp_tunnel *tunnel;
+ struct l2tp_tunnel *tunnel = session->tunnel;
BUG_ON(atomic_read(&session->ref_count) != 0);
- tunnel = session->tunnel;
- if (tunnel != NULL) {
+ if (tunnel) {
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+ if (session->session_id != 0)
+ atomic_dec(&l2tp_session_count);
+ sock_put(tunnel->sock);
+ session->tunnel = NULL;
+ l2tp_tunnel_dec_refcount(tunnel);
+ }
+
+ kfree(session);
- /* Delete the session from the hash */
+ return;
+}
+EXPORT_SYMBOL_GPL(l2tp_session_free);
+
+/* Remove an l2tp session from l2tp_core's hash lists.
+ * Provides a tidyup interface for pseudowire code which can't just route all
+ * shutdown via. l2tp_session_delete and a pseudowire-specific session_close
+ * callback.
+ */
+void __l2tp_session_unhash(struct l2tp_session *session)
+{
+ struct l2tp_tunnel *tunnel = session->tunnel;
+
+ /* Remove the session from core hashes */
+ if (tunnel) {
+ /* Remove from the per-tunnel hash */
write_lock_bh(&tunnel->hlist_lock);
hlist_del_init(&session->hlist);
write_unlock_bh(&tunnel->hlist_lock);
- /* Unlink from the global hash if not L2TPv2 */
+ /* For L2TPv3 we have a per-net hash: remove from there, too */
if (tunnel->version != L2TP_HDR_VER_2) {
struct l2tp_net *pn = l2tp_pernet(tunnel->l2tp_net);
-
spin_lock_bh(&pn->l2tp_session_hlist_lock);
hlist_del_init_rcu(&session->global_hlist);
spin_unlock_bh(&pn->l2tp_session_hlist_lock);
synchronize_rcu();
}
-
- if (session->session_id != 0)
- atomic_dec(&l2tp_session_count);
-
- sock_put(tunnel->sock);
-
- /* This will delete the tunnel context if this
- * is the last session on the tunnel.
- */
- session->tunnel = NULL;
- l2tp_tunnel_dec_refcount(tunnel);
}
-
- kfree(session);
-
- return;
}
-EXPORT_SYMBOL_GPL(l2tp_session_free);
+EXPORT_SYMBOL_GPL(__l2tp_session_unhash);
/* This function is used by the netlink SESSION_DELETE command and by
pseudowire modules.
*/
int l2tp_session_delete(struct l2tp_session *session)
{
+ if (session->ref)
+ (*session->ref)(session);
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
if (session->session_close != NULL)
(*session->session_close)(session);
-
+ if (session->deref)
+ (*session->ref)(session);
l2tp_session_dec_refcount(session);
-
return 0;
}
EXPORT_SYMBOL_GPL(l2tp_session_delete);
-
/* We come here whenever a session's send_seq, cookie_len or
* l2specific_len parameters are set.
*/
struct sk_buff;
struct l2tp_stats {
- u64 tx_packets;
- u64 tx_bytes;
- u64 tx_errors;
- u64 rx_packets;
- u64 rx_bytes;
- u64 rx_seq_discards;
- u64 rx_oos_packets;
- u64 rx_errors;
- u64 rx_cookie_discards;
- struct u64_stats_sync syncp;
+ atomic_long_t tx_packets;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_errors;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_seq_discards;
+ atomic_long_t rx_oos_packets;
+ atomic_long_t rx_errors;
+ atomic_long_t rx_cookie_discards;
};
struct l2tp_tunnel;
extern struct l2tp_tunnel *l2tp_tunnel_find_nth(struct net *net, int nth);
extern int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp);
+extern void l2tp_tunnel_closeall(struct l2tp_tunnel *tunnel);
extern int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel);
extern struct l2tp_session *l2tp_session_create(int priv_size, struct l2tp_tunnel *tunnel, u32 session_id, u32 peer_session_id, struct l2tp_session_cfg *cfg);
+extern void __l2tp_session_unhash(struct l2tp_session *session);
extern int l2tp_session_delete(struct l2tp_session *session);
extern void l2tp_session_free(struct l2tp_session *session);
extern void l2tp_recv_common(struct l2tp_session *session, struct sk_buff *skb, unsigned char *ptr, unsigned char *optr, u16 hdrflags, int length, int (*payload_hook)(struct sk_buff *skb));
+extern int l2tp_session_queue_purge(struct l2tp_session *session);
extern int l2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb);
extern int l2tp_xmit_skb(struct l2tp_session *session, struct sk_buff *skb, int hdr_len);
tunnel->sock ? atomic_read(&tunnel->sock->sk_refcnt) : 0,
atomic_read(&tunnel->ref_count));
- seq_printf(m, " %08x rx %llu/%llu/%llu rx %llu/%llu/%llu\n",
+ seq_printf(m, " %08x rx %ld/%ld/%ld rx %ld/%ld/%ld\n",
tunnel->debug,
- (unsigned long long)tunnel->stats.tx_packets,
- (unsigned long long)tunnel->stats.tx_bytes,
- (unsigned long long)tunnel->stats.tx_errors,
- (unsigned long long)tunnel->stats.rx_packets,
- (unsigned long long)tunnel->stats.rx_bytes,
- (unsigned long long)tunnel->stats.rx_errors);
+ atomic_long_read(&tunnel->stats.tx_packets),
+ atomic_long_read(&tunnel->stats.tx_bytes),
+ atomic_long_read(&tunnel->stats.tx_errors),
+ atomic_long_read(&tunnel->stats.rx_packets),
+ atomic_long_read(&tunnel->stats.rx_bytes),
+ atomic_long_read(&tunnel->stats.rx_errors));
if (tunnel->show != NULL)
tunnel->show(m, tunnel);
seq_printf(m, "\n");
}
- seq_printf(m, " %hu/%hu tx %llu/%llu/%llu rx %llu/%llu/%llu\n",
+ seq_printf(m, " %hu/%hu tx %ld/%ld/%ld rx %ld/%ld/%ld\n",
session->nr, session->ns,
- (unsigned long long)session->stats.tx_packets,
- (unsigned long long)session->stats.tx_bytes,
- (unsigned long long)session->stats.tx_errors,
- (unsigned long long)session->stats.rx_packets,
- (unsigned long long)session->stats.rx_bytes,
- (unsigned long long)session->stats.rx_errors);
+ atomic_long_read(&session->stats.tx_packets),
+ atomic_long_read(&session->stats.tx_bytes),
+ atomic_long_read(&session->stats.tx_errors),
+ atomic_long_read(&session->stats.rx_packets),
+ atomic_long_read(&session->stats.rx_bytes),
+ atomic_long_read(&session->stats.rx_errors));
if (session->show != NULL)
session->show(m, session);
static void l2tp_ip_destroy_sock(struct sock *sk)
{
struct sk_buff *skb;
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL)
kfree_skb(skb);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+
sk_refcnt_debug_dec(sk);
}
static void l2tp_ip6_destroy_sock(struct sock *sk)
{
+ struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+
lock_sock(sk);
ip6_flush_pending_frames(sk);
release_sock(sk);
+ if (tunnel) {
+ l2tp_tunnel_closeall(tunnel);
+ sock_put(sk);
+ }
+
inet6_destroy_sock(sk);
}
#if IS_ENABLED(CONFIG_IPV6)
struct ipv6_pinfo *np = NULL;
#endif
- struct l2tp_stats stats;
- unsigned int start;
hdr = genlmsg_put(skb, portid, seq, &l2tp_nl_family, flags,
L2TP_CMD_TUNNEL_GET);
if (nest == NULL)
goto nla_put_failure;
- do {
- start = u64_stats_fetch_begin(&tunnel->stats.syncp);
- stats.tx_packets = tunnel->stats.tx_packets;
- stats.tx_bytes = tunnel->stats.tx_bytes;
- stats.tx_errors = tunnel->stats.tx_errors;
- stats.rx_packets = tunnel->stats.rx_packets;
- stats.rx_bytes = tunnel->stats.rx_bytes;
- stats.rx_errors = tunnel->stats.rx_errors;
- stats.rx_seq_discards = tunnel->stats.rx_seq_discards;
- stats.rx_oos_packets = tunnel->stats.rx_oos_packets;
- } while (u64_stats_fetch_retry(&tunnel->stats.syncp, start));
-
- if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS, stats.tx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_TX_BYTES, stats.tx_bytes) ||
- nla_put_u64(skb, L2TP_ATTR_TX_ERRORS, stats.tx_errors) ||
- nla_put_u64(skb, L2TP_ATTR_RX_PACKETS, stats.rx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_BYTES, stats.rx_bytes) ||
+ if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS,
+ atomic_long_read(&tunnel->stats.tx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_BYTES,
+ atomic_long_read(&tunnel->stats.tx_bytes)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_ERRORS,
+ atomic_long_read(&tunnel->stats.tx_errors)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_PACKETS,
+ atomic_long_read(&tunnel->stats.rx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_BYTES,
+ atomic_long_read(&tunnel->stats.rx_bytes)) ||
nla_put_u64(skb, L2TP_ATTR_RX_SEQ_DISCARDS,
- stats.rx_seq_discards) ||
+ atomic_long_read(&tunnel->stats.rx_seq_discards)) ||
nla_put_u64(skb, L2TP_ATTR_RX_OOS_PACKETS,
- stats.rx_oos_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_ERRORS, stats.rx_errors))
+ atomic_long_read(&tunnel->stats.rx_oos_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_ERRORS,
+ atomic_long_read(&tunnel->stats.rx_errors)))
goto nla_put_failure;
nla_nest_end(skb, nest);
struct nlattr *nest;
struct l2tp_tunnel *tunnel = session->tunnel;
struct sock *sk = NULL;
- struct l2tp_stats stats;
- unsigned int start;
sk = tunnel->sock;
if (nest == NULL)
goto nla_put_failure;
- do {
- start = u64_stats_fetch_begin(&session->stats.syncp);
- stats.tx_packets = session->stats.tx_packets;
- stats.tx_bytes = session->stats.tx_bytes;
- stats.tx_errors = session->stats.tx_errors;
- stats.rx_packets = session->stats.rx_packets;
- stats.rx_bytes = session->stats.rx_bytes;
- stats.rx_errors = session->stats.rx_errors;
- stats.rx_seq_discards = session->stats.rx_seq_discards;
- stats.rx_oos_packets = session->stats.rx_oos_packets;
- } while (u64_stats_fetch_retry(&session->stats.syncp, start));
-
- if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS, stats.tx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_TX_BYTES, stats.tx_bytes) ||
- nla_put_u64(skb, L2TP_ATTR_TX_ERRORS, stats.tx_errors) ||
- nla_put_u64(skb, L2TP_ATTR_RX_PACKETS, stats.rx_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_BYTES, stats.rx_bytes) ||
+ if (nla_put_u64(skb, L2TP_ATTR_TX_PACKETS,
+ atomic_long_read(&session->stats.tx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_BYTES,
+ atomic_long_read(&session->stats.tx_bytes)) ||
+ nla_put_u64(skb, L2TP_ATTR_TX_ERRORS,
+ atomic_long_read(&session->stats.tx_errors)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_PACKETS,
+ atomic_long_read(&session->stats.rx_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_BYTES,
+ atomic_long_read(&session->stats.rx_bytes)) ||
nla_put_u64(skb, L2TP_ATTR_RX_SEQ_DISCARDS,
- stats.rx_seq_discards) ||
+ atomic_long_read(&session->stats.rx_seq_discards)) ||
nla_put_u64(skb, L2TP_ATTR_RX_OOS_PACKETS,
- stats.rx_oos_packets) ||
- nla_put_u64(skb, L2TP_ATTR_RX_ERRORS, stats.rx_errors))
+ atomic_long_read(&session->stats.rx_oos_packets)) ||
+ nla_put_u64(skb, L2TP_ATTR_RX_ERRORS,
+ atomic_long_read(&session->stats.rx_errors)))
goto nla_put_failure;
nla_nest_end(skb, nest);
#include <net/ip.h>
#include <net/udp.h>
#include <net/xfrm.h>
+#include <net/inet_common.h>
#include <asm/byteorder.h>
#include <linux/atomic.h>
session->name);
/* Not bound. Nothing we can do, so discard. */
- session->stats.rx_errors++;
+ atomic_long_inc(&session->stats.rx_errors);
kfree_skb(skb);
}
{
struct pppol2tp_session *ps = l2tp_session_priv(session);
struct sock *sk = ps->sock;
- struct sk_buff *skb;
+ struct socket *sock = sk->sk_socket;
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
- if (session->session_id == 0)
- goto out;
-
- if (sk != NULL) {
- lock_sock(sk);
-
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
- pppox_unbind_sock(sk);
- sk->sk_state = PPPOX_DEAD;
- sk->sk_state_change(sk);
- }
-
- /* Purge any queued data */
- skb_queue_purge(&sk->sk_receive_queue);
- skb_queue_purge(&sk->sk_write_queue);
- while ((skb = skb_dequeue(&session->reorder_q))) {
- kfree_skb(skb);
- sock_put(sk);
- }
- release_sock(sk);
+ if (sock) {
+ inet_shutdown(sock, 2);
+ /* Don't let the session go away before our socket does */
+ l2tp_session_inc_refcount(session);
}
-
-out:
return;
}
*/
static void pppol2tp_session_destruct(struct sock *sk)
{
- struct l2tp_session *session;
-
- if (sk->sk_user_data != NULL) {
- session = sk->sk_user_data;
- if (session == NULL)
- goto out;
-
+ struct l2tp_session *session = sk->sk_user_data;
+ if (session) {
sk->sk_user_data = NULL;
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
l2tp_session_dec_refcount(session);
}
-
-out:
return;
}
session = pppol2tp_sock_to_session(sk);
/* Purge any queued data */
- skb_queue_purge(&sk->sk_receive_queue);
- skb_queue_purge(&sk->sk_write_queue);
if (session != NULL) {
- struct sk_buff *skb;
- while ((skb = skb_dequeue(&session->reorder_q))) {
- kfree_skb(skb);
- sock_put(sk);
- }
+ __l2tp_session_unhash(session);
+ l2tp_session_queue_purge(session);
sock_put(sk);
}
+ skb_queue_purge(&sk->sk_receive_queue);
+ skb_queue_purge(&sk->sk_write_queue);
release_sock(sk);
return error;
}
-/* Called when deleting sessions via the netlink interface.
- */
-static int pppol2tp_session_delete(struct l2tp_session *session)
-{
- struct pppol2tp_session *ps = l2tp_session_priv(session);
-
- if (ps->sock == NULL)
- l2tp_session_dec_refcount(session);
-
- return 0;
-}
-
#endif /* CONFIG_L2TP_V3 */
/* getname() support.
static void pppol2tp_copy_stats(struct pppol2tp_ioc_stats *dest,
struct l2tp_stats *stats)
{
- dest->tx_packets = stats->tx_packets;
- dest->tx_bytes = stats->tx_bytes;
- dest->tx_errors = stats->tx_errors;
- dest->rx_packets = stats->rx_packets;
- dest->rx_bytes = stats->rx_bytes;
- dest->rx_seq_discards = stats->rx_seq_discards;
- dest->rx_oos_packets = stats->rx_oos_packets;
- dest->rx_errors = stats->rx_errors;
+ dest->tx_packets = atomic_long_read(&stats->tx_packets);
+ dest->tx_bytes = atomic_long_read(&stats->tx_bytes);
+ dest->tx_errors = atomic_long_read(&stats->tx_errors);
+ dest->rx_packets = atomic_long_read(&stats->rx_packets);
+ dest->rx_bytes = atomic_long_read(&stats->rx_bytes);
+ dest->rx_seq_discards = atomic_long_read(&stats->rx_seq_discards);
+ dest->rx_oos_packets = atomic_long_read(&stats->rx_oos_packets);
+ dest->rx_errors = atomic_long_read(&stats->rx_errors);
}
/* Session ioctl helper.
tunnel->name,
(tunnel == tunnel->sock->sk_user_data) ? 'Y' : 'N',
atomic_read(&tunnel->ref_count) - 1);
- seq_printf(m, " %08x %llu/%llu/%llu %llu/%llu/%llu\n",
+ seq_printf(m, " %08x %ld/%ld/%ld %ld/%ld/%ld\n",
tunnel->debug,
- (unsigned long long)tunnel->stats.tx_packets,
- (unsigned long long)tunnel->stats.tx_bytes,
- (unsigned long long)tunnel->stats.tx_errors,
- (unsigned long long)tunnel->stats.rx_packets,
- (unsigned long long)tunnel->stats.rx_bytes,
- (unsigned long long)tunnel->stats.rx_errors);
+ atomic_long_read(&tunnel->stats.tx_packets),
+ atomic_long_read(&tunnel->stats.tx_bytes),
+ atomic_long_read(&tunnel->stats.tx_errors),
+ atomic_long_read(&tunnel->stats.rx_packets),
+ atomic_long_read(&tunnel->stats.rx_bytes),
+ atomic_long_read(&tunnel->stats.rx_errors));
}
static void pppol2tp_seq_session_show(struct seq_file *m, void *v)
session->lns_mode ? "LNS" : "LAC",
session->debug,
jiffies_to_msecs(session->reorder_timeout));
- seq_printf(m, " %hu/%hu %llu/%llu/%llu %llu/%llu/%llu\n",
+ seq_printf(m, " %hu/%hu %ld/%ld/%ld %ld/%ld/%ld\n",
session->nr, session->ns,
- (unsigned long long)session->stats.tx_packets,
- (unsigned long long)session->stats.tx_bytes,
- (unsigned long long)session->stats.tx_errors,
- (unsigned long long)session->stats.rx_packets,
- (unsigned long long)session->stats.rx_bytes,
- (unsigned long long)session->stats.rx_errors);
+ atomic_long_read(&session->stats.tx_packets),
+ atomic_long_read(&session->stats.tx_bytes),
+ atomic_long_read(&session->stats.tx_errors),
+ atomic_long_read(&session->stats.rx_packets),
+ atomic_long_read(&session->stats.rx_bytes),
+ atomic_long_read(&session->stats.rx_errors));
if (po)
seq_printf(m, " interface %s\n", ppp_dev_name(&po->chan));
static const struct l2tp_nl_cmd_ops pppol2tp_nl_cmd_ops = {
.session_create = pppol2tp_session_create,
- .session_delete = pppol2tp_session_delete,
+ .session_delete = l2tp_session_delete,
};
#endif /* CONFIG_L2TP_V3 */
skb_reset_network_header(skb);
IP_VS_DBG(12, "ICMP for IPIP %pI4->%pI4: mtu=%u\n",
&ip_hdr(skb)->saddr, &ip_hdr(skb)->daddr, mtu);
- rcu_read_lock();
ipv4_update_pmtu(skb, dev_net(skb->dev),
mtu, 0, 0, 0, 0);
- rcu_read_unlock();
/* Client uses PMTUD? */
if (!(cih->frag_off & htons(IP_DF)))
goto ignore_ipip;
}
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
ip_vs_fill_iph_skb(af, skb, &iph);
}
IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
- ipvs = net_ipvs(net);
/* Check the server status */
if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
/* the destination server is not available */
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
if (ip_hdr(skb)->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp(skb, &r, hooknum);
{
int r;
struct net *net;
+ struct netns_ipvs *ipvs;
struct ip_vs_iphdr iphdr;
ip_vs_fill_iph_skb(AF_INET6, skb, &iphdr);
/* ipvs enabled in this netns ? */
net = skb_net(skb);
- if (!net_ipvs(net)->enable)
+ ipvs = net_ipvs(net);
+ if (unlikely(sysctl_backup_only(ipvs) || !ipvs->enable))
return NF_ACCEPT;
return ip_vs_in_icmp_v6(skb, &r, hooknum, &iphdr);
.mode = 0644,
.proc_handler = proc_dointvec,
},
+ {
+ .procname = "backup_only",
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec,
+ },
#ifdef CONFIG_IP_VS_DEBUG
{
.procname = "debug_level",
tbl[idx++].data = &ipvs->sysctl_nat_icmp_send;
ipvs->sysctl_pmtu_disc = 1;
tbl[idx++].data = &ipvs->sysctl_pmtu_disc;
+ tbl[idx++].data = &ipvs->sysctl_backup_only;
ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl);
sctp_chunkhdr_t _sctpch, *sch;
unsigned char chunk_type;
int event, next_state;
- int ihl;
+ int ihl, cofs;
#ifdef CONFIG_IP_VS_IPV6
ihl = cp->af == AF_INET ? ip_hdrlen(skb) : sizeof(struct ipv6hdr);
ihl = ip_hdrlen(skb);
#endif
- sch = skb_header_pointer(skb, ihl + sizeof(sctp_sctphdr_t),
- sizeof(_sctpch), &_sctpch);
+ cofs = ihl + sizeof(sctp_sctphdr_t);
+ sch = skb_header_pointer(skb, cofs, sizeof(_sctpch), &_sctpch);
if (sch == NULL)
return;
*/
if ((sch->type == SCTP_CID_COOKIE_ECHO) ||
(sch->type == SCTP_CID_COOKIE_ACK)) {
- sch = skb_header_pointer(skb, (ihl + sizeof(sctp_sctphdr_t) +
- sch->length), sizeof(_sctpch), &_sctpch);
- if (sch) {
- if (sch->type == SCTP_CID_ABORT)
+ int clen = ntohs(sch->length);
+
+ if (clen >= sizeof(sctp_chunkhdr_t)) {
+ sch = skb_header_pointer(skb, cofs + ALIGN(clen, 4),
+ sizeof(_sctpch), &_sctpch);
+ if (sch && sch->type == SCTP_CID_ABORT)
chunk_type = sch->type;
}
}
{
int ret;
+ ret = register_pernet_subsys(&dccp_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&dccp_proto4);
if (ret < 0)
goto out_dccp4;
if (ret < 0)
goto out_dccp6;
- ret = register_pernet_subsys(&dccp_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&dccp_proto6);
out_dccp6:
nf_ct_l4proto_unregister(&dccp_proto4);
out_dccp4:
+ unregister_pernet_subsys(&dccp_net_ops);
+out_pernet:
return ret;
}
{
int ret;
- ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4);
- if (ret < 0)
- goto out_gre4;
-
ret = register_pernet_subsys(&proto_gre_net_ops);
if (ret < 0)
goto out_pernet;
+ ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_gre4);
+ if (ret < 0)
+ goto out_gre4;
+
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_gre4);
out_gre4:
+ unregister_pernet_subsys(&proto_gre_net_ops);
+out_pernet:
return ret;
}
{
int ret;
+ ret = register_pernet_subsys(&sctp_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_sctp4);
if (ret < 0)
goto out_sctp4;
if (ret < 0)
goto out_sctp6;
- ret = register_pernet_subsys(&sctp_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp6);
out_sctp6:
nf_ct_l4proto_unregister(&nf_conntrack_l4proto_sctp4);
out_sctp4:
+ unregister_pernet_subsys(&sctp_net_ops);
+out_pernet:
return ret;
}
{
int ret;
+ ret = register_pernet_subsys(&udplite_net_ops);
+ if (ret < 0)
+ goto out_pernet;
+
ret = nf_ct_l4proto_register(&nf_conntrack_l4proto_udplite4);
if (ret < 0)
goto out_udplite4;
if (ret < 0)
goto out_udplite6;
- ret = register_pernet_subsys(&udplite_net_ops);
- if (ret < 0)
- goto out_pernet;
-
return 0;
-out_pernet:
- nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite6);
out_udplite6:
nf_ct_l4proto_unregister(&nf_conntrack_l4proto_udplite4);
out_udplite4:
+ unregister_pernet_subsys(&udplite_net_ops);
+out_pernet:
return ret;
}
inst->queue_num = queue_num;
inst->peer_portid = portid;
inst->queue_maxlen = NFQNL_QMAX_DEFAULT;
- inst->copy_range = 0xfffff;
+ inst->copy_range = 0xffff;
inst->copy_mode = NFQNL_COPY_NONE;
spin_lock_init(&inst->lock);
INIT_LIST_HEAD(&inst->queue_list);
int err = 0;
BUG_ON(grp->name[0] == '\0');
+ BUG_ON(memchr(grp->name, '\0', GENL_NAMSIZ) == NULL);
genl_lock();
list_add_tail(&task->u.tk_wait.list, &queue->tasks[0]);
task->tk_waitqueue = queue;
queue->qlen++;
+ /* barrier matches the read in rpc_wake_up_task_queue_locked() */
+ smp_wmb();
rpc_set_queued(task);
dprintk("RPC: %5u added to queue %p \"%s\"\n",
*/
static void rpc_wake_up_task_queue_locked(struct rpc_wait_queue *queue, struct rpc_task *task)
{
- if (RPC_IS_QUEUED(task) && task->tk_waitqueue == queue)
- __rpc_do_wake_up_task(queue, task);
+ if (RPC_IS_QUEUED(task)) {
+ smp_rmb();
+ if (task->tk_waitqueue == queue)
+ __rpc_do_wake_up_task(queue, task);
+ }
}
/*
#endif
}
-static int unix_release_sock(struct sock *sk, int embrion)
+static void unix_release_sock(struct sock *sk, int embrion)
{
struct unix_sock *u = unix_sk(sk);
struct path path;
if (unix_tot_inflight)
unix_gc(); /* Garbage collect fds */
-
- return 0;
}
static void init_peercred(struct sock *sk)
if (!sk)
return 0;
+ unix_release_sock(sk, 0);
sock->sk = NULL;
- return unix_release_sock(sk, 0);
+ return 0;
}
static int unix_autobind(struct socket *sock)
if (UNIXCB(skb).cred)
return;
if (test_bit(SOCK_PASSCRED, &sock->flags) ||
- !other->sk_socket ||
- test_bit(SOCK_PASSCRED, &other->sk_socket->flags)) {
+ (other->sk_socket &&
+ test_bit(SOCK_PASSCRED, &other->sk_socket->flags))) {
UNIXCB(skb).pid = get_pid(task_tgid(current));
UNIXCB(skb).cred = get_current_cred();
}
/* Only disallow PTRACE_TRACEME on more aggressive settings. */
switch (ptrace_scope) {
case YAMA_SCOPE_CAPABILITY:
- rcu_read_lock();
- if (!ns_capable(__task_cred(parent)->user_ns, CAP_SYS_PTRACE))
+ if (!has_ns_capability(parent, current_user_ns(), CAP_SYS_PTRACE))
rc = -EPERM;
- rcu_read_unlock();
break;
case YAMA_SCOPE_NO_ATTACH:
rc = -EPERM;
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/mxs.h>
#include "mxs-saif.h"
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
+
static struct mxs_saif *mxs_saif[2];
/*
projects / profile / ivi / kernel-x86-ivi.git / commitdiff