staging: comedi: cb_pcidas64: use preferred kernel type u32

Fix the checkpatch.pl issue:
CHECK: Prefer kernel type 'u32' over 'uint32_t'

Signed-off-by: Saber Rezvani <irsaber@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index f60096d..efbf277 100644 (file)
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1132,8 +1132,8 @@ struct pcidas64_private {
        void __iomem *plx9080_iobase;
        void __iomem *main_iobase;
        /* local address (used by dma controller) */
-       uint32_t local0_iobase;
-       uint32_t local1_iobase;
+       u32 local0_iobase;
+       u32 local1_iobase;
        /* dma buffers for analog input */
        u16 *ai_buffer[MAX_AI_DMA_RING_COUNT];
        /* physical addresses of ai dma buffers */
@@ -1169,9 +1169,9 @@ struct pcidas64_private {
        u16 hw_config_bits;
        u16 dac_control1_bits;
        /* last bits written to plx9080 control register */
-       uint32_t plx_control_bits;
+       u32 plx_control_bits;
        /* last bits written to plx interrupt control and status register */
-       uint32_t plx_intcsr_bits;
+       u32 plx_intcsr_bits;
        /* index of calibration source readable through ai ch0 */
        int calibration_source;
        /* bits written to i2c calibration/range register */
@@ -1266,7 +1266,7 @@ static void enable_ai_interrupts(struct comedi_device *dev,
 {
        const struct pcidas64_board *board = dev->board_ptr;
        struct pcidas64_private *devpriv = dev->private;
-       uint32_t bits;
+       u32 bits;
        unsigned long flags;
 
        bits = EN_ADC_OVERRUN_BIT | EN_ADC_DONE_INTR_BIT |
@@ -1292,7 +1292,7 @@ static void init_plx9080(struct comedi_device *dev)
 {
        const struct pcidas64_board *board = dev->board_ptr;
        struct pcidas64_private *devpriv = dev->private;
-       uint32_t bits;
+       u32 bits;
        void __iomem *plx_iobase = devpriv->plx9080_iobase;
 
        devpriv->plx_control_bits =
@@ -2279,17 +2279,17 @@ static inline unsigned int dma_transfer_size(struct comedi_device *dev)
        return num_samples;
 }
 
-static uint32_t ai_convert_counter_6xxx(const struct comedi_device *dev,
+static u32 ai_convert_counter_6xxx(const struct comedi_device *dev,
                                        const struct comedi_cmd *cmd)
 {
        /* supposed to load counter with desired divisor minus 3 */
        return cmd->convert_arg / TIMER_BASE - 3;
 }
 
-static uint32_t ai_scan_counter_6xxx(struct comedi_device *dev,
+static u32 ai_scan_counter_6xxx(struct comedi_device *dev,
                                     struct comedi_cmd *cmd)
 {
-       uint32_t count;
+       u32 count;
 
        /* figure out how long we need to delay at end of scan */
        switch (cmd->scan_begin_src) {
@@ -2307,7 +2307,7 @@ static uint32_t ai_scan_counter_6xxx(struct comedi_device *dev,
        return count - 3;
 }
 
-static uint32_t ai_convert_counter_4020(struct comedi_device *dev,
+static u32 ai_convert_counter_4020(struct comedi_device *dev,
                                        struct comedi_cmd *cmd)
 {
        struct pcidas64_private *devpriv = dev->private;
@@ -2382,7 +2382,7 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
 {
        const struct pcidas64_board *board = dev->board_ptr;
        struct pcidas64_private *devpriv = dev->private;
-       uint32_t convert_counter = 0, scan_counter = 0;
+       u32 convert_counter = 0, scan_counter = 0;
 
        check_adc_timing(dev, cmd);
 
@@ -2572,7 +2572,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        struct pcidas64_private *devpriv = dev->private;
        struct comedi_async *async = s->async;
        struct comedi_cmd *cmd = &async->cmd;
-       uint32_t bits;
+       u32 bits;
        unsigned int i;
        unsigned long flags;
        int retval;
@@ -2754,7 +2754,7 @@ static void pio_drain_ai_fifo_32(struct comedi_device *dev)
        struct comedi_subdevice *s = dev->read_subdev;
        unsigned int nsamples;
        unsigned int i;
-       uint32_t fifo_data;
+       u32 fifo_data;
        int write_code =
                readw(devpriv->main_iobase + ADC_WRITE_PNTR_REG) & 0x7fff;
        int read_code =
@@ -2794,7 +2794,7 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
        const struct pcidas64_board *board = dev->board_ptr;
        struct pcidas64_private *devpriv = dev->private;
        struct comedi_subdevice *s = dev->read_subdev;
-       uint32_t next_transfer_addr;
+       u32 next_transfer_addr;
        int j;
        int num_samples = 0;
        void __iomem *pci_addr_reg;
@@ -3056,8 +3056,8 @@ static irqreturn_t handle_interrupt(int irq, void *d)
        struct comedi_device *dev = d;
        struct pcidas64_private *devpriv = dev->private;
        unsigned short status;
-       uint32_t plx_status;
-       uint32_t plx_bits;
+       u32 plx_status;
+       u32 plx_bits;
 
        plx_status = readl(devpriv->plx9080_iobase + PLX_REG_INTCSR);
        status = readw(devpriv->main_iobase + HW_STATUS_REG);
@@ -3975,7 +3975,7 @@ static int auto_attach(struct comedi_device *dev,
        struct pci_dev *pcidev = comedi_to_pci_dev(dev);
        const struct pcidas64_board *board = NULL;
        struct pcidas64_private *devpriv;
-       uint32_t local_range, local_decode;
+       u32 local_range, local_decode;
        int retval;
 
        if (context < ARRAY_SIZE(pcidas64_boards))
@@ -4013,13 +4013,13 @@ static int auto_attach(struct comedi_device *dev,
                      PLX_LASRR_MEM_MASK;
        local_decode = readl(devpriv->plx9080_iobase + PLX_REG_LAS0BA) &
                       local_range & PLX_LASBA_MEM_MASK;
-       devpriv->local0_iobase = ((uint32_t)devpriv->main_phys_iobase &
+       devpriv->local0_iobase = ((u32)devpriv->main_phys_iobase &
                                  ~local_range) | local_decode;
        local_range = readl(devpriv->plx9080_iobase + PLX_REG_LAS1RR) &
                      PLX_LASRR_MEM_MASK;
        local_decode = readl(devpriv->plx9080_iobase + PLX_REG_LAS1BA) &
                       local_range & PLX_LASBA_MEM_MASK;
-       devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase &
+       devpriv->local1_iobase = ((u32)devpriv->dio_counter_phys_iobase &
                                  ~local_range) | local_decode;
 
        retval = alloc_and_init_dma_members(dev);