#define UPDATE_INTERVAL(max, rate) \
((1000 << (LM63_MAX_CONVRATE - (rate))) / (max))
-/*
- * Functions declaration
- */
-
-static int lm63_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int lm63_remove(struct i2c_client *client);
-
-static struct lm63_data *lm63_update_device(struct device *dev);
-
-static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
-static void lm63_init_client(struct i2c_client *client);
-
enum chips { lm63, lm64, lm96163 };
-/*
- * Driver data (common to all clients)
- */
-
-static const struct i2c_device_id lm63_id[] = {
- { "lm63", lm63 },
- { "lm64", lm64 },
- { "lm96163", lm96163 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, lm63_id);
-
-static struct i2c_driver lm63_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "lm63",
- },
- .probe = lm63_probe,
- .remove = lm63_remove,
- .id_table = lm63_id,
- .detect = lm63_detect,
- .address_list = normal_i2c,
-};
-
/*
* Client data (each client gets its own)
*/
return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000);
}
+static struct lm63_data *lm63_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm63_data *data = i2c_get_clientdata(client);
+ unsigned long next_update;
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ next_update = data->last_updated
+ + msecs_to_jiffies(data->update_interval) + 1;
+
+ if (time_after(jiffies, next_update) || !data->valid) {
+ if (data->config & 0x04) { /* tachometer enabled */
+ /* order matters for fan1_input */
+ data->fan[0] = i2c_smbus_read_byte_data(client,
+ LM63_REG_TACH_COUNT_LSB) & 0xFC;
+ data->fan[0] |= i2c_smbus_read_byte_data(client,
+ LM63_REG_TACH_COUNT_MSB) << 8;
+ data->fan[1] = (i2c_smbus_read_byte_data(client,
+ LM63_REG_TACH_LIMIT_LSB) & 0xFC)
+ | (i2c_smbus_read_byte_data(client,
+ LM63_REG_TACH_LIMIT_MSB) << 8);
+ }
+
+ data->pwm1_freq = i2c_smbus_read_byte_data(client,
+ LM63_REG_PWM_FREQ);
+ if (data->pwm1_freq == 0)
+ data->pwm1_freq = 1;
+ data->pwm1[0] = i2c_smbus_read_byte_data(client,
+ LM63_REG_PWM_VALUE);
+
+ data->temp8[0] = i2c_smbus_read_byte_data(client,
+ LM63_REG_LOCAL_TEMP);
+ data->temp8[1] = i2c_smbus_read_byte_data(client,
+ LM63_REG_LOCAL_HIGH);
+
+ /* order matters for temp2_input */
+ data->temp11[0] = i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_TEMP_MSB) << 8;
+ data->temp11[0] |= i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_TEMP_LSB);
+ data->temp11[1] = (i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_LOW_MSB) << 8)
+ | i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_LOW_LSB);
+ data->temp11[2] = (i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_HIGH_MSB) << 8)
+ | i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_HIGH_LSB);
+ data->temp11[3] = (i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_OFFSET_MSB) << 8)
+ | i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_OFFSET_LSB);
+
+ if (data->kind == lm96163)
+ data->temp11u = (i2c_smbus_read_byte_data(client,
+ LM96163_REG_REMOTE_TEMP_U_MSB) << 8)
+ | i2c_smbus_read_byte_data(client,
+ LM96163_REG_REMOTE_TEMP_U_LSB);
+
+ data->temp8[2] = i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_TCRIT);
+ data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
+ LM63_REG_REMOTE_TCRIT_HYST);
+
+ data->alarms = i2c_smbus_read_byte_data(client,
+ LM63_REG_ALERT_STATUS) & 0x7F;
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
+ !data->lut_valid) {
+ for (i = 0; i < data->lut_size; i++) {
+ data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
+ LM63_REG_LUT_PWM(i));
+ data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
+ LM63_REG_LUT_TEMP(i));
+ }
+ data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
+ LM63_REG_LUT_TEMP_HYST);
+
+ data->lut_last_updated = jiffies;
+ data->lut_valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
/*
* Sysfs callback functions and files
*/
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm63_detect(struct i2c_client *new_client,
+static int lm63_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
- struct i2c_adapter *adapter = new_client->adapter;
+ struct i2c_adapter *adapter = client->adapter;
u8 man_id, chip_id, reg_config1, reg_config2;
u8 reg_alert_status, reg_alert_mask;
- int address = new_client->addr;
+ int address = client->addr;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
+ man_id = i2c_smbus_read_byte_data(client, LM63_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, LM63_REG_CHIP_ID);
- reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG1);
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG2);
- reg_alert_status = i2c_smbus_read_byte_data(new_client,
+ reg_config1 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
+ reg_config2 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG2);
+ reg_alert_status = i2c_smbus_read_byte_data(client,
LM63_REG_ALERT_STATUS);
- reg_alert_mask = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_MASK);
+ reg_alert_mask = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_MASK);
if (man_id != 0x01 /* National Semiconductor */
|| (reg_config1 & 0x18) != 0x00
return 0;
}
-static int lm63_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct lm63_data *data;
- int err;
-
- data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(new_client, data);
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- /* Set the device type */
- data->kind = id->driver_data;
- if (data->kind == lm64)
- data->temp2_offset = 16000;
-
- /* Initialize chip */
- lm63_init_client(new_client);
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&new_client->dev.kobj, &lm63_group);
- if (err)
- goto exit_free;
- if (data->config & 0x04) { /* tachometer enabled */
- err = sysfs_create_group(&new_client->dev.kobj,
- &lm63_group_fan1);
- if (err)
- goto exit_remove_files;
- }
- if (data->kind == lm96163) {
- err = device_create_file(&new_client->dev,
- &dev_attr_temp2_type);
- if (err)
- goto exit_remove_files;
-
- err = sysfs_create_group(&new_client->dev.kobj,
- &lm63_group_extra_lut);
- if (err)
- goto exit_remove_files;
- }
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &lm63_group);
- sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1);
- if (data->kind == lm96163) {
- device_remove_file(&new_client->dev, &dev_attr_temp2_type);
- sysfs_remove_group(&new_client->dev.kobj,
- &lm63_group_extra_lut);
- }
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
/*
* Ideally we shouldn't have to initialize anything, since the BIOS
* should have taken care of everything
(data->config_fan & 0x20) ? "manual" : "auto");
}
-static int lm63_remove(struct i2c_client *client)
+static int lm63_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct lm63_data *data = i2c_get_clientdata(client);
+ struct lm63_data *data;
+ int err;
- hwmon_device_unregister(data->hwmon_dev);
+ data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ data->valid = 0;
+ mutex_init(&data->update_lock);
+
+ /* Set the device type */
+ data->kind = id->driver_data;
+ if (data->kind == lm64)
+ data->temp2_offset = 16000;
+
+ /* Initialize chip */
+ lm63_init_client(client);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &lm63_group);
+ if (err)
+ goto exit_free;
+ if (data->config & 0x04) { /* tachometer enabled */
+ err = sysfs_create_group(&client->dev.kobj, &lm63_group_fan1);
+ if (err)
+ goto exit_remove_files;
+ }
+ if (data->kind == lm96163) {
+ err = device_create_file(&client->dev, &dev_attr_temp2_type);
+ if (err)
+ goto exit_remove_files;
+
+ err = sysfs_create_group(&client->dev.kobj,
+ &lm63_group_extra_lut);
+ if (err)
+ goto exit_remove_files;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove_files;
+ }
+
+ return 0;
+
+exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &lm63_group);
sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
if (data->kind == lm96163) {
device_remove_file(&client->dev, &dev_attr_temp2_type);
sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut);
}
-
+exit_free:
kfree(data);
- return 0;
+exit:
+ return err;
}
-static struct lm63_data *lm63_update_device(struct device *dev)
+static int lm63_remove(struct i2c_client *client)
{
- struct i2c_client *client = to_i2c_client(dev);
struct lm63_data *data = i2c_get_clientdata(client);
- unsigned long next_update;
- int i;
-
- mutex_lock(&data->update_lock);
-
- next_update = data->last_updated
- + msecs_to_jiffies(data->update_interval) + 1;
-
- if (time_after(jiffies, next_update) || !data->valid) {
- if (data->config & 0x04) { /* tachometer enabled */
- /* order matters for fan1_input */
- data->fan[0] = i2c_smbus_read_byte_data(client,
- LM63_REG_TACH_COUNT_LSB) & 0xFC;
- data->fan[0] |= i2c_smbus_read_byte_data(client,
- LM63_REG_TACH_COUNT_MSB) << 8;
- data->fan[1] = (i2c_smbus_read_byte_data(client,
- LM63_REG_TACH_LIMIT_LSB) & 0xFC)
- | (i2c_smbus_read_byte_data(client,
- LM63_REG_TACH_LIMIT_MSB) << 8);
- }
-
- data->pwm1_freq = i2c_smbus_read_byte_data(client,
- LM63_REG_PWM_FREQ);
- if (data->pwm1_freq == 0)
- data->pwm1_freq = 1;
- data->pwm1[0] = i2c_smbus_read_byte_data(client,
- LM63_REG_PWM_VALUE);
-
- data->temp8[0] = i2c_smbus_read_byte_data(client,
- LM63_REG_LOCAL_TEMP);
- data->temp8[1] = i2c_smbus_read_byte_data(client,
- LM63_REG_LOCAL_HIGH);
- /* order matters for temp2_input */
- data->temp11[0] = i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_TEMP_MSB) << 8;
- data->temp11[0] |= i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_TEMP_LSB);
- data->temp11[1] = (i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_LOW_MSB) << 8)
- | i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_LOW_LSB);
- data->temp11[2] = (i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_HIGH_MSB) << 8)
- | i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_HIGH_LSB);
- data->temp11[3] = (i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_OFFSET_MSB) << 8)
- | i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_OFFSET_LSB);
-
- if (data->kind == lm96163)
- data->temp11u = (i2c_smbus_read_byte_data(client,
- LM96163_REG_REMOTE_TEMP_U_MSB) << 8)
- | i2c_smbus_read_byte_data(client,
- LM96163_REG_REMOTE_TEMP_U_LSB);
-
- data->temp8[2] = i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_TCRIT);
- data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
- LM63_REG_REMOTE_TCRIT_HYST);
-
- data->alarms = i2c_smbus_read_byte_data(client,
- LM63_REG_ALERT_STATUS) & 0x7F;
-
- data->last_updated = jiffies;
- data->valid = 1;
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm63_group);
+ sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
+ if (data->kind == lm96163) {
+ device_remove_file(&client->dev, &dev_attr_temp2_type);
+ sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut);
}
- if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
- !data->lut_valid) {
- for (i = 0; i < data->lut_size; i++) {
- data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
- LM63_REG_LUT_PWM(i));
- data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
- LM63_REG_LUT_TEMP(i));
- }
- data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
- LM63_REG_LUT_TEMP_HYST);
+ kfree(data);
+ return 0;
+}
- data->lut_last_updated = jiffies;
- data->lut_valid = 1;
- }
+/*
+ * Driver data (common to all clients)
+ */
- mutex_unlock(&data->update_lock);
+static const struct i2c_device_id lm63_id[] = {
+ { "lm63", lm63 },
+ { "lm64", lm64 },
+ { "lm96163", lm96163 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm63_id);
- return data;
-}
+static struct i2c_driver lm63_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm63",
+ },
+ .probe = lm63_probe,
+ .remove = lm63_remove,
+ .id_table = lm63_id,
+ .detect = lm63_detect,
+ .address_list = normal_i2c,
+};
module_i2c_driver(lm63_driver);