arm64: dts: ls1028a: fix memory node

While enabling EDAC support for the LS1028A it was discovered that the
memory node has a wrong endianness setting as well as a wrong interrupt
assignment. Fix both.

This was tested on a sl28 board. To force ECC errors, you can use the
error injection supported by the controller in hardware (with
CONFIG_EDAC_DEBUG enabled):

 # enable error injection
 $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl
 # flip lowest bit of the data
 $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo

Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eca06a0c3cf876601f45905548cdc9d74dbd1e08..a30249ebffa8c0878617d5cc5672b45c90a29cd8 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -197,8 +197,8 @@
                ddr: memory-controller@1080000 {
                        compatible = "fsl,qoriq-memory-controller";
                        reg = <0x0 0x1080000 0x0 0x1000>;
-                       interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-                       big-endian;
+                       interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+                       little-endian;
                };
 
                dcfg: syscon@1e00000 {