mmc: fsl_esdhc: simplify 64bit check for SDMA transfers

SDMA can only do DMA with 32 bit addresses. This is true for all
architectures (just doesn't apply to 32 bit ones). Simplify the code and
remove unnecessary CONFIG_FSL_LAYERSCAPE.

Also make the error message more concise.

Signed-off-by: Michael Walle <michael@walle.cc>

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a6092ad..041f7d3 100644 (file)
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -211,9 +211,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 {
        int timeout;
        struct fsl_esdhc *regs = priv->esdhc_regs;
-#if defined(CONFIG_FSL_LAYERSCAPE)
        dma_addr_t addr;
-#endif
        uint wml_value;
 
        wml_value = data->blocksize/4;
@@ -224,15 +222,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 
                esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_FSL_LAYERSCAPE)
                addr = virt_to_phys((void *)(data->dest));
                if (upper_32_bits(addr))
-                       printf("Error found for upper 32 bits\n");
-               else
-                       esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
-#else
-               esdhc_write32(&regs->dsaddr, (u32)data->dest);
-#endif
+                       printf("Cannot use 64 bit addresses with SDMA\n");
+               esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
 #endif
        } else {
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
@@ -251,15 +244,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
                esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
                                        wml_value << 16);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_FSL_LAYERSCAPE)
                addr = virt_to_phys((void *)(data->src));
                if (upper_32_bits(addr))
-                       printf("Error found for upper 32 bits\n");
-               else
-                       esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
-#else
-               esdhc_write32(&regs->dsaddr, (u32)data->src);
-#endif
+                       printf("Cannot use 64 bit addresses with SDMA\n");
+               esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
 #endif
        }
 
@@ -316,17 +304,12 @@ static void check_and_invalidate_dcache_range
        unsigned end = 0;
        unsigned size = roundup(ARCH_DMA_MINALIGN,
                                data->blocks*data->blocksize);
-#if defined(CONFIG_FSL_LAYERSCAPE)
        dma_addr_t addr;
 
        addr = virt_to_phys((void *)(data->dest));
        if (upper_32_bits(addr))
-               printf("Error found for upper 32 bits\n");
-       else
-               start = lower_32_bits(addr);
-#else
-       start = (unsigned)data->dest;
-#endif
+               printf("Cannot use 64 bit addresses with SDMA\n");
+       start = lower_32_bits(addr);
        end = start + size;
        invalidate_dcache_range(start, end);
 }