powerpc: P1021RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1021RDB instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and macros.

Remove macro CONFIG_P1021RDB.

Signed-off-by: York Sun <york.sun@nxp.com>

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 14ef053..3477109 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -135,6 +135,11 @@ config TARGET_P1020UTM
        select SUPPORT_SPL
        select SUPPORT_TPL
 
+config TARGET_P1021RDB
+       bool "Support P1021RDB"
+       select SUPPORT_SPL
+       select SUPPORT_TPL
+
 config TARGET_P1_P2_RDB_PC
        bool "Support p1_p2_rdb_pc"
        select SUPPORT_SPL

diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig
index 7deb2ae..8160f44 100644 (file)
--- a/board/freescale/p1_p2_rdb_pc/Kconfig
+++ b/board/freescale/p1_p2_rdb_pc/Kconfig
@@ -2,7 +2,8 @@ if TARGET_P1_P2_RDB_PC          || \
        TARGET_P1020MBG         || \
        TARGET_P1020RDB_PC      || \
        TARGET_P1020RDB_PD      || \
-       TARGET_P1020UTM
+       TARGET_P1020UTM         || \
+       TARGET_P1021RDB
 
 config SYS_BOARD
        default "p1_p2_rdb_pc"

diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 6dc3957..59cd89a 100644 (file)
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -15,7 +15,7 @@
 
 #ifdef CONFIG_SYS_DDR_RAW_TIMING
 #if    defined(CONFIG_P1020RDB_PROTO) || \
-       defined(CONFIG_P1021RDB) || \
+       defined(CONFIG_TARGET_P1021RDB) || \
        defined(CONFIG_TARGET_P1020UTM)
 /* Micron MT41J256M8_187E */
 dimm_params_t ddr_raw_timing = {

diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 33f2c7e..44e8e02 100644 (file)
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -39,7 +39,7 @@
 #define GPIO_SLIC_PIN          30
 #define GPIO_SLIC_DATA         (1 << (31 - GPIO_SLIC_PIN))
 
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
 #define GPIO_DDR_RST_PORT      1
 #define GPIO_DDR_RST_PIN       8
 #define GPIO_DDR_RST_DATA      (1 << (31 - GPIO_DDR_RST_PIN))
@@ -47,7 +47,7 @@
 #define GPIO_2BIT_MASK         (0x3 << (32 - (GPIO_DDR_RST_PIN + 1) * 2))
 #endif
 
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
 #define PCA_IOPORT_I2C_ADDR            0x23
 #define PCA_IOPORT_OUTPUT_CMD          0x2
 #define PCA_IOPORT_CFG_CMD             0x6
@@ -58,7 +58,7 @@
 const qe_iop_conf_t qe_iop_conf_tab[] = {
        /* GPIO */
        {1,   1, 2, 0, 0}, /* GPIO7/PB1   - LOAD_DEFAULT_N */
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
        {1,   8, 1, 1, 0}, /* GPIO10/PB8  - DDR_RST */
 #endif
        {0,  15, 1, 0, 0}, /* GPIO11/A15  - WDI */
@@ -150,7 +150,7 @@ void board_gpio_init(void)
        ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        par_io_t *par_io = (par_io_t *) &(gur->qe_par_io);
 
-#if defined(CONFIG_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_TARGET_P1021RDB) && !defined(CONFIG_SYS_RAMBOOT)
        /* reset DDR3 */
        setbits_be32(&par_io[GPIO_DDR_RST_PORT].cpdat, GPIO_DDR_RST_DATA);
        udelay(1000);
@@ -379,7 +379,7 @@ int board_eth_init(bd_t *bis)
 }
 
 #if defined(CONFIG_QE) && \
-       (defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB))
+       (defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB))
 static void fdt_board_fixup_qe_pins(void *blob)
 {
        unsigned int oldbus;
@@ -448,7 +448,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_QE
        do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
                        sizeof("okay"), 0);
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_P1021RDB)
+#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
        fdt_board_fixup_qe_pins(blob);
 #endif
 #endif

diff --git a/configs/P1021RDB-PC_36BIT_NAND_defconfig b/configs/P1021RDB-PC_36BIT_NAND_defconfig
index d06aa57..82dcec5 100644 (file)
--- a/configs/P1021RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1021RDB-PC_36BIT_NAND_defconfig
@@ -2,13 +2,13 @@ CONFIG_PPC=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y

diff --git a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig
index 98705dd..2ef2eda 100644 (file)
--- a/configs/P1021RDB-PC_36BIT_SDCARD_defconfig
+++ b/configs/P1021RDB-PC_36BIT_SDCARD_defconfig
@@ -6,13 +6,13 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

diff --git a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig
index bc002af..f7910b6 100644 (file)
--- a/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig
+++ b/configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig
@@ -7,13 +7,13 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

diff --git a/configs/P1021RDB-PC_36BIT_defconfig b/configs/P1021RDB-PC_36BIT_defconfig
index 6c1cb28..87d45b2 100644 (file)
--- a/configs/P1021RDB-PC_36BIT_defconfig
+++ b/configs/P1021RDB-PC_36BIT_defconfig
@@ -1,12 +1,11 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y

diff --git a/configs/P1021RDB-PC_NAND_defconfig b/configs/P1021RDB-PC_NAND_defconfig
index ebfc053..29335b1 100644 (file)
--- a/configs/P1021RDB-PC_NAND_defconfig
+++ b/configs/P1021RDB-PC_NAND_defconfig
@@ -2,12 +2,12 @@ CONFIG_PPC=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y

diff --git a/configs/P1021RDB-PC_SDCARD_defconfig b/configs/P1021RDB-PC_SDCARD_defconfig
index c9e4ed7..bde4d3d 100644 (file)
--- a/configs/P1021RDB-PC_SDCARD_defconfig
+++ b/configs/P1021RDB-PC_SDCARD_defconfig
@@ -6,12 +6,12 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

diff --git a/configs/P1021RDB-PC_SPIFLASH_defconfig b/configs/P1021RDB-PC_SPIFLASH_defconfig
index 2fd40b7..4f1db4f 100644 (file)
--- a/configs/P1021RDB-PC_SPIFLASH_defconfig
+++ b/configs/P1021RDB-PC_SPIFLASH_defconfig
@@ -7,12 +7,12 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y

diff --git a/configs/P1021RDB-PC_defconfig b/configs/P1021RDB-PC_defconfig
index b7b93e2..e26967b 100644 (file)
--- a/configs/P1021RDB-PC_defconfig
+++ b/configs/P1021RDB-PC_defconfig
@@ -1,11 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1021RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1021RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 97a0b19..f68feb3 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -83,7 +83,7 @@
                        "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 #endif
 
-#if defined(CONFIG_P1021RDB)
+#if defined(CONFIG_TARGET_P1021RDB)
 #define CONFIG_BOARDNAME "P1021RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1021

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 3b70543..3362baf 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3385,7 +3385,6 @@ CONFIG_OTHBOOTARGS
 CONFIG_OVERWRITE_ETHADDR_ONCE
 CONFIG_P1020
 CONFIG_P1021
-CONFIG_P1021RDB
 CONFIG_P1024
 CONFIG_P1024RDB
 CONFIG_P1025