Phy functions shouldn't be associated with net_device.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Return: NONE
* Note: 8226 support both 20M and 40 MHz
*---------------------------------------------------------------------------*/
-void PHY_SetRF8256Bandwidth(struct net_device* dev , HT_CHANNEL_WIDTH Bandwidth) //20M or 40M
+void PHY_SetRF8256Bandwidth(struct r8192_priv *priv, HT_CHANNEL_WIDTH Bandwidth) //20M or 40M
{
u8 eRFPath;
- struct r8192_priv *priv = ieee80211_priv(dev);
//for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
{
- if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
continue;
switch(Bandwidth)
case HT_CHANNEL_WIDTH_20:
if(priv->card_8192_version == VERSION_8190_BD || priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later!
{
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x100); //phy para:1ba
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x021);
//cosa add for sd3's request 01/23/2008
//rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
case HT_CHANNEL_WIDTH_20_40:
if(priv->card_8192_version == VERSION_8190_BD ||priv->card_8192_version == VERSION_8190_BE)// 8256 D-cut, E-cut, xiong: consider it later!
{
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff);
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1);
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); //phy para:3ba
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3ff);
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0e1);
}
else
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
-RT_STATUS PHY_RF8256_Config(struct net_device* dev)
+RT_STATUS PHY_RF8256_Config(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
// Initialize general global value
//
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
// TODO: Extend RF_PATH_C and RF_PATH_D in the future
priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
// Config BB and RF
- rtStatus = phy_RF8256_Config_ParaFile(dev);
+ rtStatus = phy_RF8256_Config_ParaFile(priv);
return rtStatus;
}
+
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
-RT_STATUS phy_RF8256_Config_ParaFile(struct net_device* dev)
+RT_STATUS phy_RF8256_Config_ParaFile(struct r8192_priv *priv)
{
u32 u4RegValue = 0;
u8 eRFPath;
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
BB_REGISTER_DEFINITION_T *pPhyReg;
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 RegOffSetToBeCheck = 0x3;
u32 RegValueToBeCheck = 0x7f1;
u32 RF3_Final_Value = 0;
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
+
//3//-----------------------------------------------------------------
//3// <2> Initialize RF
//3//-----------------------------------------------------------------
for(eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
{
- if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
{
case RF90_PATH_A:
case RF90_PATH_C:
- u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
+ u4RegValue = rtl8192_QueryBBReg(priv, pPhyReg->rfintfs, bRFSI_RFENV);
break;
case RF90_PATH_B :
case RF90_PATH_D:
- u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
+ u4RegValue = rtl8192_QueryBBReg(priv, pPhyReg->rfintfs, bRFSI_RFENV<<16);
break;
}
/*----Set RF_ENV enable----*/
- rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+ rtl8192_setBBreg(priv, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
/*----Set RF_ENV output high----*/
- rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
+ rtl8192_setBBreg(priv, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
/* Set bit number of Address and Data for RF register */
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
+ rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258
+ rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ???
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
/*----Check RF block (for FPGA platform only)----*/
// TODO: this function should be removed on ASIC , Emily 2007.2.2
- rtStatus = rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath);
+ rtStatus = rtl8192_phy_checkBBAndRF(priv, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath);
if(rtStatus!= RT_STATUS_SUCCESS)
{
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
case RF90_PATH_A:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
case RF90_PATH_B:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
case RF90_PATH_C:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
case RF90_PATH_D:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
{
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,(RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(priv,(RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
{
case RF90_PATH_A:
case RF90_PATH_C:
- rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
+ rtl8192_setBBreg(priv, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
break;
case RF90_PATH_B :
case RF90_PATH_D:
- rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
+ rtl8192_setBBreg(priv, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
break;
}
}
-void PHY_SetRF8256CCKTxPower(struct net_device* dev, u8 powerlevel)
+void PHY_SetRF8256CCKTxPower(struct r8192_priv *priv, u8 powerlevel)
{
u32 TxAGC=0;
- struct r8192_priv *priv = ieee80211_priv(dev);
TxAGC = powerlevel;
if(priv->bDynamicTxLowPower == true)//cosa 04282008 for cck long range
}
if(TxAGC > 0x24)
TxAGC = 0x24;
- rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
+ rtl8192_setBBreg(priv, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
}
-void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel)
+void PHY_SetRF8256OFDMTxPower(struct r8192_priv *priv, u8 powerlevel)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
u8 index = 0;
{
writeVal = (byte3<<24) | (byte2<<16) |(byte1<<8) |byte0;
}
- rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
+ rtl8192_setBBreg(priv, RegOffset[index], 0x7f7f7f7f, writeVal);
}
}
write_nic_byte(priv, ANAPAR, 0x37);//160MHz
mdelay(1);
//enable clock 80/88 MHz
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2]
priv->bHwRfOffAction = 0;
//RF-A, RF-B
//enable RF-Chip A/B
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
+ rtl8192_setBBreg(priv, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
//analog to digital on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
//digital to analog on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
//rx antenna on
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
+ rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
//rx antenna on
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
+ rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
//analog to digital part2 on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
}
#define RTL819X_TOTAL_RF_PATH 2 /* for 8192E */
-void PHY_SetRF8256Bandwidth(struct net_device *dev,
+void PHY_SetRF8256Bandwidth(struct r8192_priv *priv,
HT_CHANNEL_WIDTH Bandwidth);
-RT_STATUS PHY_RF8256_Config(struct net_device *dev);
+RT_STATUS PHY_RF8256_Config(struct r8192_priv *priv);
-RT_STATUS phy_RF8256_Config_ParaFile(struct net_device *dev);
+RT_STATUS phy_RF8256_Config_ParaFile(struct r8192_priv *priv);
-void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel);
-void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel);
+void PHY_SetRF8256CCKTxPower(struct r8192_priv *priv, u8 powerlevel);
+void PHY_SetRF8256OFDMTxPower(struct r8192_priv *priv, u8 powerlevel);
bool MgntActSet_RF_State(struct net_device *dev,
RT_RF_POWER_STATE StateToSet,
struct r8192_priv *priv = ieee80211_priv(dev);
//disable RF-Chip A/B
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0);
//analog to digital off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x0);
//digital to analog off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x18, 0x0);
//rx antenna off
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);
+ rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0xf, 0x0);
//rx antenna off
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);
+ rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0xf, 0x0);
//analog to digital part2 off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0);
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x60, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x4, 0x0);
// Analog parameter!!Change bias and Lbus control.
write_nic_byte(priv, ANAPAR_FOR_8192PciE, 0x07);
//3// Initialize BB before MAC
//3//
RT_TRACE(COMP_INIT, "BB Config Start!\n");
- rtStatus = rtl8192_BBConfig(dev);
+ rtStatus = rtl8192_BBConfig(priv);
if(rtStatus != RT_STATUS_SUCCESS)
{
RT_TRACE(COMP_ERR, "BB Config failed\n");
//2=======================================================
// Set PHY related configuration defined in MAC register bank
//2=======================================================
- rtl8192_phy_configmac(dev);
+ rtl8192_phy_configmac(priv);
if (priv->card_8192_version > (u8) VERSION_8190_BD) {
- rtl8192_phy_getTxPower(dev);
- rtl8192_phy_setTxPower(dev, priv->chan);
+ rtl8192_phy_getTxPower(priv);
+ rtl8192_phy_setTxPower(priv, priv->chan);
}
//if D or C cut
if(priv->ResetProgress == RESET_TYPE_NORESET)
{
RT_TRACE(COMP_INIT, "RF Config Started!\n");
- rtStatus = rtl8192_phy_RFConfig(dev);
+ rtStatus = rtl8192_phy_RFConfig(priv);
if(rtStatus != RT_STATUS_SUCCESS)
{
RT_TRACE(COMP_ERR, "RF Config failed\n");
}
RT_TRACE(COMP_INIT, "RF Config Finished!\n");
}
- rtl8192_phy_updateInitGain(dev);
+ rtl8192_phy_updateInitGain(priv);
/*---- Set CCK and OFDM Block "ON"----*/
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
+ rtl8192_setBBreg(priv, rFPGA0_RFMOD, bCCKEn, 0x1);
+ rtl8192_setBBreg(priv, rFPGA0_RFMOD, bOFDMEn, 0x1);
//Enable Led
write_nic_byte(priv, 0x87, 0x0);
if(priv->IC_Cut >= IC_VersionCut_D)
{
- tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord);
- tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord);
+ tmpRegA = rtl8192_QueryBBReg(priv, rOFDM0_XATxIQImbalance, bMaskDWord);
+ tmpRegC = rtl8192_QueryBBReg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord);
for(i = 0; i<TxBBGainTableLength; i++)
{
if(tmpRegA == priv->txbbgain_table[i].txbbgain_value)
}
}
- TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+ TempCCk = rtl8192_QueryBBReg(priv, rCCK0_TxFilter1, bMaskByte2);
for(i=0 ; i<CCKTxBBGainTableLength ; i++)
{
{
for (rfpath = RF90_PATH_A; rfpath < RF90_PATH_C; rfpath++)
{
- if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv, rfpath))
continue;
RT_TRACE(COMP_DBG, "pPreviousstats->RxMIMOSignalStrength[rfpath] = %d\n", pprevious_stats->RxMIMOSignalStrength[rfpath]);
//Fixed by Jacken 2008-03-20
/*2007.08.30 requested by SD3 Jerry */
if (priv->phy_check_reg824 == 0)
{
- priv->phy_reg824_bit9 = rtl8192_QueryBBReg(priv->ieee80211->dev, rFPGA0_XA_HSSIParameter2, 0x200);
+ priv->phy_reg824_bit9 = rtl8192_QueryBBReg(priv, rFPGA0_XA_HSSIParameter2, 0x200);
priv->phy_check_reg824 = 1;
}
if(priv->rfa_txpowertrackingindex_real > 4)
{
priv->rfa_txpowertrackingindex_real--;
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
}
priv->rfc_txpowertrackingindex--;
if(priv->rfc_txpowertrackingindex_real > 4)
{
priv->rfc_txpowertrackingindex_real--;
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
}
}
else
{
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
}
}
else
if(priv->rfc_txpowertrackingindex_real > 4)
{
priv->rfc_txpowertrackingindex_real--;
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
}
}
else
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[4].txbbgain_value);
}
}
else
{
priv->rfa_txpowertrackingindex++;
priv->rfa_txpowertrackingindex_real++;
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
priv->rfc_txpowertrackingindex++;
priv->rfc_txpowertrackingindex_real++;
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
}
else
{
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
}
}
else
{
priv->rfc_txpowertrackingindex++;
priv->rfc_txpowertrackingindex_real++;
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value);
}
else
- rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
+ rtl8192_setBBreg(priv, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[TxBBGainTableLength - 1].txbbgain_value);
}
}
if (RF_Type == RF_2T4R)
if(!priv->btxpower_trackingInit)
{
//Query OFDM default setting
- tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
+ tmpRegA = rtl8192_QueryBBReg(priv, rOFDM0_XATxIQImbalance, bMaskDWord);
for(i=0; i<OFDM_Table_Length; i++) //find the index
{
if(tmpRegA == OFDMSwingTable[i])
}
//Query CCK default setting From 0xa22
- TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
+ TempCCk = rtl8192_QueryBBReg(priv, rCCK0_TxFilter1, bMaskByte2);
for(i=0 ; i<CCK_Table_length ; i++)
{
if(TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0])
}
// read and filter out unreasonable value
- tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
+ tmpRegA = rtl8192_phy_QueryRFReg(priv, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d\n", tmpRegA);
if(tmpRegA < 3 || tmpRegA > 13)
return;
if(priv->OFDM_index != tmpOFDMindex)
{
priv->OFDM_index = tmpOFDMindex;
- rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
+ rtl8192_setBBreg(priv, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n",
priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
}
{
//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
//actually write reg0x02 bit1=0, then bit1=1.
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+ rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+ rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
+ rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
+ rtl8192_phy_SetRFReg(priv, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
TM_Trigger = 1;
return;
}
TempVal = (u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[0] +
(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[1]<<8)) ;
- rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
//Write 0xa24 ~ 0xa27
TempVal = 0;
TempVal = (u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[2] +
(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[3]<<8) +
(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[4]<<16 )+
(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[5]<<24));
- rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
//Write 0xa28 0xa29
TempVal = 0;
TempVal = (u32)(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[6] +
(priv->cck_txbbgain_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[7]<<8)) ;
- rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
}
else
{
TempVal = (u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[0] +
(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[1]<<8)) ;
- rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
//Write 0xa24 ~ 0xa27
TempVal = 0;
TempVal = (u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[2] +
(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[3]<<8) +
(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[4]<<16 )+
(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[5]<<24));
- rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
//Write 0xa28 0xa29
TempVal = 0;
TempVal = (u32)(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[6] +
(priv->cck_txbbgain_ch14_table[(u8)(priv->CCKPresentAttentuation)].ccktxbb_valuearray[7]<<8)) ;
- rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
}
//Write 0xa22 0xa23
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ;
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter1, TempVal);
//Write 0xa24 ~ 0xa27
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter2, TempVal);
//Write 0xa28 0xa29
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ;
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
rCCK0_DebugPort, TempVal);
}
TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
(CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ;
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter1, TempVal);
//Write 0xa24 ~ 0xa27
(CCKSwingTable_Ch14[priv->CCK_index][3]<<8) +
(CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+
(CCKSwingTable_Ch14[priv->CCK_index][5]<<24);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_TxFilter2, bMaskDWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n",
rCCK0_TxFilter2, TempVal);
//Write 0xa28 0xa29
TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] +
(CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ;
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
+ rtl8192_setBBreg(priv, rCCK0_DebugPort, bMaskLWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING,"CCK chnl 14, reg 0x%x = 0x%x\n",
rCCK0_DebugPort, TempVal);
}
if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled
{// FW DIG Off
for(i=0; i<3; i++)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
fw_dig++;
dm_digtable.dig_state = DM_STA_DIG_OFF; //fw dig off.
}
dm_digtable.dig_state = DM_STA_DIG_MAX;
// Fw DIG On.
for(i=0; i<3; i++)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
dm_digtable.dig_algorithm_switch = 0;
}
dm_digtable.dig_state = DM_STA_DIG_OFF;
// 1.1 DIG Off.
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite.
// 1.2 Set initial gain.
write_nic_byte(priv, rOFDM0_XAAGCCore1, 0x17);
//PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);
// 2.5 DIG On.
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite.
}
//record the enabled rssi threshold
DM_RxPathSelTable.rf_enable_rssi_th[min_rssi_index] = tmp_max_rssi+5;
//disable the BB Rx path, OFDM
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0); // 0xc04[3:0]
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0); // 0xd04[3:0]
+ rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x1<<min_rssi_index, 0x0); // 0xc04[3:0]
+ rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x1<<min_rssi_index, 0x0); // 0xd04[3:0]
disabled_rf_cnt++;
}
if(DM_RxPathSelTable.cck_method == CCK_Rx_Version_1)
if(update_cck_rx_path)
{
DM_RxPathSelTable.cck_Rx_path = (cck_default_Rx<<2)|(cck_optional_Rx);
- rtl8192_setBBreg(dev, rCCK0_AFESetting, 0x0f000000, DM_RxPathSelTable.cck_Rx_path);
+ rtl8192_setBBreg(priv, rCCK0_AFESetting, 0x0f000000, DM_RxPathSelTable.cck_Rx_path);
}
if(DM_RxPathSelTable.disabledRF)
if(tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i])
{
//enable the BB Rx path
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); // 0xc04[3:0]
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); // 0xd04[3:0]
+ rtl8192_setBBreg(priv, rOFDM0_TRxPathEnable, 0x1<<i, 0x1); // 0xc04[3:0]
+ rtl8192_setBBreg(priv, rOFDM1_TRxPathEnable, 0x1<<i, 0x1); // 0xd04[3:0]
DM_RxPathSelTable.rf_enable_rssi_th[i] = 100;
disabled_rf_cnt--;
}
RT_TRACE(COMP_TXAGC, "SetTxPowerLevel8190() channel = %d\n", priv->ieee80211->current_network.channel);
- rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+ rtl8192_phy_setTxPower(priv, priv->ieee80211->current_network.channel);
}
priv->bLastDTPFlag_High = priv->bDynamicTxHighPower;
/*************************Define local function prototype**********************/
-static u32 phy_FwRFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset);
-static void phy_FwRFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32 Data);
+static u32 phy_FwRFSerialRead(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 Offset);
+static void phy_FwRFSerialWrite(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data);
+
/*************************Define local function prototype**********************/
/******************************************************************************
*function: This function read BB parameters from Header file we gen,
* output: none
* return: 0(illegal, false), 1(legal,true)
* ***************************************************************************/
-u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
+u8 rtl8192_phy_CheckIsLegalRFPath(struct r8192_priv *priv, u32 eRFPath)
{
u8 ret = 1;
- struct r8192_priv *priv = ieee80211_priv(dev);
if (priv->rf_type == RF_2T4R)
ret = 0;
* return: none
* notice:
* ****************************************************************************/
-void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
+void rtl8192_setBBreg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 OriginalValue, BitShift, NewValue;
if(dwBitMask!= bMaskDWord)
* return: u32 Data //the readback register value
* notice:
* ****************************************************************************/
-u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask)
+u32 rtl8192_QueryBBReg(struct r8192_priv *priv, u32 dwRegAddr, u32 dwBitMask)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 OriginalValue, BitShift;
OriginalValue = read_nic_dword(priv, dwRegAddr);
* return: u32 readback value
* notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
* ****************************************************************************/
-static u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
+static u32 rtl8192_phy_RFSerialRead(struct r8192_priv *priv,
+ RF90_RADIO_PATH_E eRFPath, u32 Offset)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 ret = 0;
u32 NewOffset = 0;
BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath];
//switch page for 8256 RF IC
//analog to digital off, for protection
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
if (Offset >= 31)
{
priv->RfReg0Value[eRFPath] |= 0x140;
//Switch to Reg_Mode2 for Reg 31-45
- rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
+ rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
//modify offset
NewOffset = Offset -30;
}
priv->RfReg0Value[eRFPath] |= 0x100;
priv->RfReg0Value[eRFPath] &= (~0x40);
//Switch to Reg_Mode 1 for Reg16-30
- rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
+ rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) );
NewOffset = Offset - 15;
}
NewOffset = Offset;
//put desired read addr to LSSI control Register
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
+ rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset);
//Issue a posedge trigger
//
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0);
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1);
+ rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0);
+ rtl8192_setBBreg(priv, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1);
// TODO: we should not delay such a long time. Ask help from SD3
msleep(1);
- ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
+ ret = rtl8192_QueryBBReg(priv, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
// Switch back to Reg_Mode0;
priv->RfReg0Value[eRFPath] &= 0xebf;
rtl8192_setBBreg(
- dev,
+ priv,
pPhyReg->rf3wireOffset,
bMaskDWord,
(priv->RfReg0Value[eRFPath] << 16));
//analog to digital on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
return ret;
}
* Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf)
*------------------------------------------------------------------
* ****************************************************************************/
-static void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
+static void rtl8192_phy_RFSerialWrite(struct r8192_priv *priv,
+ RF90_RADIO_PATH_E eRFPath, u32 Offset,
+ u32 Data)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 DataAndAddr = 0, NewOffset = 0;
BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
Offset &= 0x3f;
//analog to digital off, for protection
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
if (Offset >= 31)
{
priv->RfReg0Value[eRFPath] |= 0x140;
- rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16));
+ rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16));
NewOffset = Offset - 30;
}
else if (Offset >= 16)
{
priv->RfReg0Value[eRFPath] |= 0x100;
priv->RfReg0Value[eRFPath] &= (~0x40);
- rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
+ rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16));
NewOffset = Offset - 15;
}
else
DataAndAddr = (Data<<16) | (NewOffset&0x3f);
// Write Operation
- rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
+ rtl8192_setBBreg(priv, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
if(Offset==0x0)
{
priv->RfReg0Value[eRFPath] &= 0xebf;
rtl8192_setBBreg(
- dev,
+ priv,
pPhyReg->rf3wireOffset,
bMaskDWord,
(priv->RfReg0Value[eRFPath] << 16));
}
//analog to digital on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
}
/******************************************************************************
*function: This function set specific bits to RF register
- * input: net_device dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * input: RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
* u32 RegAddr //target addr to be modified
* u32 BitMask //taget bit pos in the addr to be modified
* u32 Data //value to be write
* return: none
* notice:
* ****************************************************************************/
-void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
+void rtl8192_phy_SetRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath,
+ u32 RegAddr, u32 BitMask, u32 Data)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 Original_Value, BitShift, New_Value;
// u8 time = 0;
- if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
return;
if (priv->eRFPowerState != eRfOn && !priv->being_init_adapter)
return;
{
if (BitMask != bMask12Bits) // RF data is 12 bits only
{
- Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+ Original_Value = phy_FwRFSerialRead(priv, eRFPath, RegAddr);
BitShift = rtl8192_CalculateBitShift(BitMask);
New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
- phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+ phy_FwRFSerialWrite(priv, eRFPath, RegAddr, New_Value);
}else
- phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data);
+ phy_FwRFSerialWrite(priv, eRFPath, RegAddr, Data);
udelay(200);
}
{
if (BitMask != bMask12Bits) // RF data is 12 bits only
{
- Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
+ Original_Value = rtl8192_phy_RFSerialRead(priv, eRFPath, RegAddr);
BitShift = rtl8192_CalculateBitShift(BitMask);
New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift));
- rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value);
+ rtl8192_phy_RFSerialWrite(priv, eRFPath, RegAddr, New_Value);
}else
- rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data);
+ rtl8192_phy_RFSerialWrite(priv, eRFPath, RegAddr, Data);
}
//up(&priv->rf_sem);
}
* return: u32 Data //the readback register value
* notice:
* ****************************************************************************/
-u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
+u32 rtl8192_phy_QueryRFReg(struct r8192_priv *priv, RF90_RADIO_PATH_E eRFPath,
+ u32 RegAddr, u32 BitMask)
{
u32 Original_Value, Readback_Value, BitShift;
- struct r8192_priv *priv = ieee80211_priv(dev);
- if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
+
+ if (!rtl8192_phy_CheckIsLegalRFPath(priv, eRFPath))
return 0;
if (priv->eRFPowerState != eRfOn && !priv->being_init_adapter)
return 0;
down(&priv->rf_sem);
if (priv->Rf_Mode == RF_OP_By_FW)
{
- Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr);
+ Original_Value = phy_FwRFSerialRead(priv, eRFPath, RegAddr);
udelay(200);
}
else
{
- Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr);
+ Original_Value = rtl8192_phy_RFSerialRead(priv, eRFPath, RegAddr);
}
BitShift = rtl8192_CalculateBitShift(BitMask);
* return: none
* notice:
* ***************************************************************************/
-static u32 phy_FwRFSerialRead(
- struct net_device* dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset )
+static u32 phy_FwRFSerialRead(struct r8192_priv *priv,
+ RF90_RADIO_PATH_E eRFPath, u32 Offset)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 Data = 0;
u8 time = 0;
//DbgPrint("FW RF CTRL\n\r");
* return: none
* notice:
* ***************************************************************************/
-static void
-phy_FwRFSerialWrite(
- struct net_device* dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset,
- u32 Data )
+static void phy_FwRFSerialWrite(struct r8192_priv *priv,
+ RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u8 time = 0;
//DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data);
* notice: BB parameters may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
-void rtl8192_phy_configmac(struct net_device* dev)
+void rtl8192_phy_configmac(struct r8192_priv *priv)
{
u32 dwArrayLen = 0, i = 0;
u32* pdwArray = NULL;
- struct r8192_priv *priv = ieee80211_priv(dev);
#ifdef TO_DO_LIST
if(Adapter->bInHctTest)
{
//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
// ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
}
- rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
+ rtl8192_setBBreg(priv, pdwArray[i], pdwArray[i+1], pdwArray[i+2]);
}
}
* sure it has been synced with the newest.
* ***************************************************************************/
-void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
+void rtl8192_phyConfigBB(struct r8192_priv *priv, u8 ConfigType)
{
int i;
//u8 ArrayLength;
u32* Rtl819XPHY_REGArray_Table = NULL;
u32* Rtl819XAGCTAB_Array_Table = NULL;
u16 AGCTAB_ArrayLen, PHY_REGArrayLen = 0;
- struct r8192_priv *priv = ieee80211_priv(dev);
#ifdef TO_DO_LIST
u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL;
if(Adapter->bInHctTest)
{
for (i=0; i<PHY_REGArrayLen; i+=2)
{
- rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
+ rtl8192_setBBreg(priv, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x\n",i, Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
}
}
{
for (i=0; i<AGCTAB_ArrayLen; i+=2)
{
- rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
+ rtl8192_setBBreg(priv, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x\n",i, Rtl819XAGCTAB_Array_Table[i], Rtl819XAGCTAB_Array_Table[i+1]);
}
}
* return: none
* notice: Initialization value here is constant and it should never be changed
* ***************************************************************************/
-static void rtl8192_InitBBRFRegDef(struct net_device* dev)
+static void rtl8192_InitBBRFRegDef(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
// RF Interface Sowrtware Control
priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
* return: return whether BB and RF is ok(0:OK; 1:Fail)
* notice: This function may be removed in the ASIC
* ***************************************************************************/
-RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath)
+RT_STATUS rtl8192_phy_checkBBAndRF(struct r8192_priv *priv,
+ HW90_BLOCK_E CheckBlock,
+ RF90_RADIO_PATH_E eRFPath)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
// BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
RT_STATUS ret = RT_STATUS_SUCCESS;
u32 i, CheckTimes = 4, dwRegRead = 0;
case HW90_BLOCK_RF:
WriteData[i] &= 0xfff;
- rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
+ rtl8192_phy_SetRFReg(priv, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]);
// TODO: we should not delay for such a long time. Ask SD3
mdelay(10);
- dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
+ dwRegRead = rtl8192_phy_QueryRFReg(priv, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
mdelay(10);
break;
* notice: Initialization value may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
-static RT_STATUS rtl8192_BB_Config_ParaFile(struct net_device* dev)
+static RT_STATUS rtl8192_BB_Config_ParaFile(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
+
u8 bRegValue = 0, eCheckItem = 0;
u32 dwRegValue = 0;
/**************************************
// TODO: this function should be removed on ASIC , Emily 2007.2.2
for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++)
{
- rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
+ rtStatus = rtl8192_phy_checkBBAndRF(priv, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
if(rtStatus != RT_STATUS_SUCCESS)
{
RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1);
}
}
/*---- Set CCK and OFDM Block "OFF"----*/
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0);
/*----BB Register Initilazation----*/
//==m==>Set PHY REG From Header<==m==
- rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG);
+ rtl8192_phyConfigBB(priv, BaseBand_Config_PHY_REG);
/*----Set BB reset de-Active----*/
dwRegValue = read_nic_dword(priv, CPU_GEN);
/*----BB AGC table Initialization----*/
//==m==>Set PHY REG From Header<==m==
- rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB);
+ rtl8192_phyConfigBB(priv, BaseBand_Config_AGC_TAB);
if (priv->card_8192_version > VERSION_8190_BD)
{
}
else
dwRegValue = 0x0; //Antenna gain offset doesn't make sense in RF 1T2R.
- rtl8192_setBBreg(dev, rFPGA0_TxGainStage,
+ rtl8192_setBBreg(priv, rFPGA0_TxGainStage,
(bXBTxAGC|bXCTxAGC|bXDTxAGC), dwRegValue);
//XSTALLCap
dwRegValue = priv->CrystalCap;
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, dwRegValue);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, bXtalCap92x, dwRegValue);
}
// Check if the CCK HighPower is turned ON.
* notice: Initialization value may change all the time, so please make
* sure it has been synced with the newest.
* ***************************************************************************/
-RT_STATUS rtl8192_BBConfig(struct net_device* dev)
+RT_STATUS rtl8192_BBConfig(struct r8192_priv *priv)
{
- rtl8192_InitBBRFRegDef(dev);
+ rtl8192_InitBBRFRegDef(priv);
//config BB&RF. As hardCode based initialization has not been well
//implemented, so use file first.FIXME:should implement it for hardcode?
- return rtl8192_BB_Config_ParaFile(dev);
+ return rtl8192_BB_Config_ParaFile(priv);
}
/******************************************************************************
* output: none
* return: none
* ***************************************************************************/
-void rtl8192_phy_getTxPower(struct net_device* dev)
+void rtl8192_phy_getTxPower(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
-
priv->MCSTxPowerLevelOriginalOffset[0] =
read_nic_dword(priv, rTxAGC_Rate18_06);
priv->MCSTxPowerLevelOriginalOffset[1] =
* output: none
* return: none
* ***************************************************************************/
-void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel)
+void rtl8192_phy_setTxPower(struct r8192_priv *priv, u8 channel)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u8 powerlevel = 0,powerlevelOFDM24G = 0;
char ant_pwr_diff;
u32 u4RegValue;
priv->AntennaTxPwDiff[1]<<4 |
priv->AntennaTxPwDiff[0]);
- rtl8192_setBBreg(dev, rFPGA0_TxGainStage,
+ rtl8192_setBBreg(priv, rFPGA0_TxGainStage,
(bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
}
}
pHalData->CurrentCckTxPwrIdx = powerlevel;
pHalData->CurrentOfdm24GTxPwrIdx = powerlevelOFDM24G;
#endif
- PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement
- PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+ PHY_SetRF8256CCKTxPower(priv, powerlevel); //need further implement
+ PHY_SetRF8256OFDMTxPower(priv, powerlevelOFDM24G);
}
/******************************************************************************
* output: none
* return: only 8256 is supported
* ***************************************************************************/
-RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev)
+RT_STATUS rtl8192_phy_RFConfig(struct r8192_priv *priv)
{
- return PHY_RF8256_Config(dev);
+ return PHY_RF8256_Config(priv);
}
/******************************************************************************
* output: none
* return: As Windows has not implemented this, wait for complement
* ***************************************************************************/
-void rtl8192_phy_updateInitGain(struct net_device* dev)
+void rtl8192_phy_updateInitGain(struct r8192_priv *priv)
{
}
* return: return code show if RF configuration is successful(0:pass, 1:fail)
* Note: Delay may be required for RF configuration
* ***************************************************************************/
-u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath)
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct r8192_priv *priv,
+ RF90_RADIO_PATH_E eRFPath)
{
int i;
msleep(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioA_Array[i], bMask12Bits, Rtl819XRadioA_Array[i+1]);
+ rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioA_Array[i], bMask12Bits, Rtl819XRadioA_Array[i+1]);
//msleep(1);
}
msleep(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioB_Array[i], bMask12Bits, Rtl819XRadioB_Array[i+1]);
+ rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioB_Array[i], bMask12Bits, Rtl819XRadioB_Array[i+1]);
//msleep(1);
}
msleep(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioC_Array[i], bMask12Bits, Rtl819XRadioC_Array[i+1]);
+ rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioC_Array[i], bMask12Bits, Rtl819XRadioC_Array[i+1]);
//msleep(1);
}
msleep(100);
continue;
}
- rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioD_Array[i], bMask12Bits, Rtl819XRadioD_Array[i+1]);
+ rtl8192_phy_SetRFReg(priv, eRFPath, Rtl819XRadioD_Array[i], bMask12Bits, Rtl819XRadioD_Array[i+1]);
//msleep(1);
}
* return: none
* Note:
* ***************************************************************************/
-static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
+static void rtl8192_SetTxPowerLevel(struct r8192_priv *priv, u8 channel)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
- PHY_SetRF8256CCKTxPower(dev, powerlevel);
- PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
+ PHY_SetRF8256CCKTxPower(priv, powerlevel);
+ PHY_SetRF8256OFDMTxPower(priv, powerlevelOFDM24G);
}
/****************************************************************************************
* return: true if finished, false otherwise
* Note: Wait for simpler function to replace it //wb
* ***************************************************************************/
-static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay)
+static u8 rtl8192_phy_SwChnlStepByStep(struct r8192_priv *priv, u8 channel,
+ u8* stage, u8* step, u32* delay)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
// PCHANNEL_ACCESS_SETTING pChnlAccessSetting;
SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT];
u32 PreCommonCmdCnt;
{
case CmdID_SetTxPowerLevel:
if(priv->card_8192_version > (u8)VERSION_8190_BD) //xiong: consider it later!
- rtl8192_SetTxPowerLevel(dev,channel);
+ rtl8192_SetTxPowerLevel(priv, channel);
break;
case CmdID_WritePortUlong:
write_nic_dword(priv, CurrentCmd->Para1, CurrentCmd->Para2);
break;
case CmdID_RF_WriteReg:
for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bMask12Bits, CurrentCmd->Para2<<7);
+ rtl8192_phy_SetRFReg(priv, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bMask12Bits, CurrentCmd->Para2<<7);
break;
default:
break;
* return: noin
* Note: We should not call this function directly
* ***************************************************************************/
-static void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
+static void rtl8192_phy_FinishSwChnlNow(struct r8192_priv *priv, u8 channel)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
u32 delay = 0;
- while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay))
+ while (!rtl8192_phy_SwChnlStepByStep(priv, channel, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
{
if(delay>0)
msleep(delay);//or mdelay? need further consideration
* output: none
* return: noin
* ***************************************************************************/
-void rtl8192_SwChnl_WorkItem(struct net_device *dev)
+void rtl8192_SwChnl_WorkItem(struct r8192_priv *priv)
{
-
- struct r8192_priv *priv = ieee80211_priv(dev);
-
RT_TRACE(COMP_TRACE, "==> SwChnlCallback819xUsbWorkItem()\n");
RT_TRACE(COMP_TRACE, "=====>--%s(), set chan:%d, priv:%p\n", __FUNCTION__, priv->chan, priv);
- rtl8192_phy_FinishSwChnlNow(dev , priv->chan);
+ rtl8192_phy_FinishSwChnlNow(priv, priv->chan);
RT_TRACE(COMP_TRACE, "<== SwChnlCallback819xUsbWorkItem()\n");
}
priv->SwChnlStage=0;
priv->SwChnlStep=0;
-// schedule_work(&(priv->SwChnlWorkItem));
-// rtl8192_SwChnl_WorkItem(dev);
- if(priv->up) {
-// queue_work(priv->priv_wq,&(priv->SwChnlWorkItem));
- rtl8192_SwChnl_WorkItem(dev);
- }
+ if (priv->up)
+ rtl8192_SwChnl_WorkItem(priv);
+
priv->SwChnlInProgress = false;
return true;
}
-static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct net_device *dev )
+static void CCK_Tx_Power_Track_BW_Switch_TSSI(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
+ struct net_device *dev = priv->ieee80211->dev;
switch(priv->CurrentChannelBW)
{
}
}
-static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct net_device *dev)
+static void CCK_Tx_Power_Track_BW_Switch_ThermalMeter(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
+ struct net_device *dev = priv->ieee80211->dev;
if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14)
priv->bcck_in_ch14 = TRUE;
dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
}
-static void CCK_Tx_Power_Track_BW_Switch(struct net_device *dev)
+static void CCK_Tx_Power_Track_BW_Switch(struct r8192_priv *priv)
{
- struct r8192_priv *priv = ieee80211_priv(dev);
//if(pHalData->bDcut == TRUE)
if(priv->IC_Cut >= IC_VersionCut_D)
- CCK_Tx_Power_Track_BW_Switch_TSSI(dev);
+ CCK_Tx_Power_Track_BW_Switch_TSSI(priv);
else
- CCK_Tx_Power_Track_BW_Switch_ThermalMeter(dev);
+ CCK_Tx_Power_Track_BW_Switch_ThermalMeter(priv);
}
* Note: I doubt whether SetBWModeInProgress flag is necessary as we can
* test whether current work in the queue or not.//do I?
* ***************************************************************************/
-void rtl8192_SetBWModeWorkItem(struct net_device *dev)
+void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv)
{
-
- struct r8192_priv *priv = ieee80211_priv(dev);
u8 regBwOpMode;
RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n",
{
case HT_CHANNEL_WIDTH_20:
// Add by Vivi 20071119
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
- rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
+ rtl8192_setBBreg(priv, rFPGA0_RFMOD, bRFMOD, 0x0);
+ rtl8192_setBBreg(priv, rFPGA1_RFMOD, bRFMOD, 0x0);
// rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
// Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
write_nic_dword(priv, rCCK0_DebugPort, 0x00000204);
}
else
- CCK_Tx_Power_Track_BW_Switch(dev);
+ CCK_Tx_Power_Track_BW_Switch(priv);
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x00100000, 1);
break;
case HT_CHANNEL_WIDTH_20_40:
// Add by Vivi 20071119
- rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
- rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
+ rtl8192_setBBreg(priv, rFPGA0_RFMOD, bRFMOD, 0x1);
+ rtl8192_setBBreg(priv, rFPGA1_RFMOD, bRFMOD, 0x1);
//rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
//rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
//rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
write_nic_dword(priv, rCCK0_DebugPort, 0x00000409);
}
else
- CCK_Tx_Power_Track_BW_Switch(dev);
+ CCK_Tx_Power_Track_BW_Switch(priv);
// Set Control channel to upper or lower. These settings are required only for 40MHz
- rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
- rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
+ rtl8192_setBBreg(priv, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
+ rtl8192_setBBreg(priv, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0);
+ rtl8192_setBBreg(priv, rFPGA0_AnalogParameter1, 0x00100000, 0);
break;
default:
RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW);
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
//<3>Set RF related register
- PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
+ PHY_SetRF8256Bandwidth(priv, priv->CurrentChannelBW);
atomic_dec(&(priv->ieee80211->atm_swbw));
priv->SetBWModeInProgress= false;
//queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem));
// schedule_work(&(priv->SetBWModeWorkItem));
- rtl8192_SetBWModeWorkItem(dev);
+ rtl8192_SetBWModeWorkItem(priv);
}
initial_gain = SCAN_RX_INITIAL_GAIN;//pHalData->DefaultInitialGain[0];//
BitMask = bMaskByte0;
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
- priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
- priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
- priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
- priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // FW DIG OFF
+ priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XAAGCCore1, BitMask);
+ priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XBAGCCore1, BitMask);
+ priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XCAGCCore1, BitMask);
+ priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(priv, rOFDM0_XDAGCCore1, BitMask);
BitMask = bMaskByte2;
- priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
+ priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(priv, rCCK0_CCA, BitMask);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
BitMask = 0x7f; //Bit0~ Bit6
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x8); // FW DIG OFF
- rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
- rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
- rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
- rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
+ rtl8192_setBBreg(priv, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
+ rtl8192_setBBreg(priv, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
+ rtl8192_setBBreg(priv, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
+ rtl8192_setBBreg(priv, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
BitMask = bMaskByte2;
- rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
+ rtl8192_setBBreg(priv, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
- rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel);
+ rtl8192_phy_setTxPower(priv, priv->ieee80211->current_network.channel);
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
- rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON
+ rtl8192_setBBreg(priv, UFWP, bMaskByte1, 0x1); // FW DIG ON
break;
default:
RT_TRACE(COMP_SCAN, "Unknown IG Operation.\n");
#define bMaskLWord 0x0000ffff
#define bMaskDWord 0xffffffff
-u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath);
+u8 rtl8192_phy_CheckIsLegalRFPath(struct r8192_priv *priv, u32 eRFPath);
-void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr,
+void rtl8192_setBBreg(struct r8192_priv *priv, u32 dwRegAddr,
u32 dwBitMask, u32 dwData);
-u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr,
+u32 rtl8192_QueryBBReg(struct r8192_priv *priv, u32 dwRegAddr,
u32 dwBitMask);
-void rtl8192_phy_SetRFReg(struct net_device *dev,
+void rtl8192_phy_SetRFReg(struct r8192_priv *priv,
RF90_RADIO_PATH_E eRFPath, u32 RegAddr,
u32 BitMask, u32 Data);
-u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
+u32 rtl8192_phy_QueryRFReg(struct r8192_priv *priv,
RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask);
-void rtl8192_phy_configmac(struct net_device *dev);
+void rtl8192_phy_configmac(struct r8192_priv *priv);
-void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
+void rtl8192_phyConfigBB(struct r8192_priv *priv, u8 ConfigType);
-RT_STATUS rtl8192_phy_checkBBAndRF(struct net_device *dev,
+RT_STATUS rtl8192_phy_checkBBAndRF(struct r8192_priv *priv,
HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
-RT_STATUS rtl8192_BBConfig(struct net_device *dev);
+RT_STATUS rtl8192_BBConfig(struct r8192_priv *priv);
-void rtl8192_phy_getTxPower(struct net_device *dev);
+void rtl8192_phy_getTxPower(struct r8192_priv *priv);
-void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel);
+void rtl8192_phy_setTxPower(struct r8192_priv *priv, u8 channel);
-RT_STATUS rtl8192_phy_RFConfig(struct net_device* dev);
+RT_STATUS rtl8192_phy_RFConfig(struct r8192_priv *priv);
-void rtl8192_phy_updateInitGain(struct net_device* dev);
+void rtl8192_phy_updateInitGain(struct r8192_priv *priv);
-u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct r8192_priv *priv,
RF90_RADIO_PATH_E eRFPath);
u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
void rtl8192_SetBWMode(struct net_device *dev,
HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-void rtl8192_SwChnl_WorkItem(struct net_device *dev);
+void rtl8192_SwChnl_WorkItem(struct r8192_priv *priv);
-void rtl8192_SetBWModeWorkItem(struct net_device *dev);
+void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv);
void InitialGain819xPci(struct net_device *dev, u8 Operation);
projects / platform / kernel / linux-rpi.git / commitdiff