NATSEMI ETHERNET DRIVER (DP8381x)
M: Tim Hockin <thockin@hockin.org>
S: Maintained
-F: drivers/net/natsemi.c
+F: drivers/net/ethernet/natsemi/natsemi.c
NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
M: Daniel Mack <zonque@gmail.com>
M: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/sonic.*
+F: drivers/net/ethernet/natsemi/sonic.*
SONICS SILICON BACKPLANE DRIVER (SSB)
M: Michael Buesch <m@bues.ch>
source "drivers/net/arm/Kconfig"
-config MACSONIC
- tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
- depends on MAC
- ---help---
- Support for NatSemi SONIC based Ethernet devices. This includes
- the onboard Ethernet in many Quadras as well as some LC-PDS,
- a few Nubus and all known Comm Slot Ethernet cards. If you have
- one of these say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. This module will
- be called macsonic.
-
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB532
If you have a Mikrotik RouterBoard 500 or IDT RC32434
based system say Y. Otherwise say N.
-config MIPS_JAZZ_SONIC
- tristate "MIPS JAZZ onboard SONIC Ethernet support"
- depends on MACH_JAZZ
- help
- This is the driver for the onboard card of MIPS Magnum 4000,
- Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
-
-config XTENSA_XT2000_SONIC
- tristate "Xtensa XT2000 onboard SONIC Ethernet support"
- depends on XTENSA_PLATFORM_XT2000
- help
- This is the driver for the onboard card of the Xtensa XT2000 board.
-
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
To compile this driver as a module, choose M here. The module
will be called seeq8005.
-config IBMLANA
- tristate "IBM LAN Adapter/A support"
- depends on MCA
- ---help---
- This is a Micro Channel Ethernet adapter. You need to set
- CONFIG_MCA to use this driver. It is both available as an in-kernel
- driver and as a module.
-
- To compile this driver as a module, choose M here. The only
- currently supported card is the IBM LAN Adapter/A for Ethernet. It
- will both support 16K and 32K memory windows, however a 32K window
- gives a better security against packet losses. Usage of multiple
- boards with this driver should be possible, but has not been tested
- up to now due to lack of hardware.
-
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on ISA || EISA || PCI
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
-config NATSEMI
- tristate "National Semiconductor DP8381x series PCI Ethernet support"
- depends on NET_PCI && PCI
- select CRC32
- help
- This driver is for the National Semiconductor DP83810 series,
- which is used in cards from PureData, NetGear, Linksys
- and others, including the 83815 chip.
- More specific information and updates are available from
- <http://www.scyld.com/network/natsemi.html>.
-
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
source "drivers/net/ixp2000/Kconfig"
-config NS83820
- tristate "National Semiconductor DP83820 support"
- depends on PCI
- help
- This is a driver for the National Semiconductor DP83820 series
- of gigabit ethernet MACs. Cards using this chipset include
- the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
- SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
- zero copy.
-
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_NATSEMI) += natsemi.o
-obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_FEALNX) += fealnx.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
-obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
-
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_S6GMAC) += s6gmac.o
config NET_VENDOR_8390
bool "National Semi-conductor 8390 devices"
- depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \
- MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \
- ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL
+ depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
+ ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
+ MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
+ EXPERIMENTAL)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
-source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
+source "drivers/net/ethernet/natsemi/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
+obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
--- /dev/null
+#
+# National Semi-conductor device configuration
+#
+
+config NET_VENDOR_NATSEMI
+ bool "National Semi-conductor devices"
+ depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about National Semi-conductor devices. If you say Y,
+ you will be asked for your specific card in the following questions.
+
+if NET_VENDOR_NATSEMI
+
+config IBMLANA
+ tristate "IBM LAN Adapter/A support"
+ depends on MCA
+ ---help---
+ This is a Micro Channel Ethernet adapter. You need to set
+ CONFIG_MCA to use this driver. It is both available as an in-kernel
+ driver and as a module.
+
+ To compile this driver as a module, choose M here. The only
+ currently supported card is the IBM LAN Adapter/A for Ethernet. It
+ will both support 16K and 32K memory windows, however a 32K window
+ gives a better security against packet losses. Usage of multiple
+ boards with this driver should be possible, but has not been tested
+ up to now due to lack of hardware.
+
+config MACSONIC
+ tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+ depends on MAC
+ ---help---
+ Support for NatSemi SONIC based Ethernet devices. This includes
+ the onboard Ethernet in many Quadras as well as some LC-PDS,
+ a few Nubus and all known Comm Slot Ethernet cards. If you have
+ one of these say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. This module will
+ be called macsonic.
+
+config MIPS_JAZZ_SONIC
+ tristate "MIPS JAZZ onboard SONIC Ethernet support"
+ depends on MACH_JAZZ
+ ---help---
+ This is the driver for the onboard card of MIPS Magnum 4000,
+ Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config NATSEMI
+ tristate "National Semiconductor DP8381x series PCI Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver is for the National Semiconductor DP83810 series,
+ which is used in cards from PureData, NetGear, Linksys
+ and others, including the 83815 chip.
+ More specific information and updates are available from
+ <http://www.scyld.com/network/natsemi.html>.
+
+config NS83820
+ tristate "National Semiconductor DP83820 support"
+ depends on PCI
+ ---help---
+ This is a driver for the National Semiconductor DP83820 series
+ of gigabit ethernet MACs. Cards using this chipset include
+ the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+ SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
+ zero copy.
+
+config XTENSA_XT2000_SONIC
+ tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+ depends on XTENSA_PLATFORM_XT2000
+ ---help---
+ This is the driver for the onboard card of the Xtensa XT2000 board.
+
+endif # NET_VENDOR_NATSEMI
--- /dev/null
+#
+# Makefile for the National Semi-conductor Sonic devices.
+#
+
+obj-$(CONFIG_IBMLANA) += ibmlana.o
+obj-$(CONFIG_MACSONIC) += macsonic.o
+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+obj-$(CONFIG_NATSEMI) += natsemi.o
+obj-$(CONFIG_NS83820) += ns83820.o
+obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff