BOOLEAN bInfinite = FALSE;
/* Check if num_of_time is -ve. If yes, blink led in infinite loop */
- if (num_of_time < 0)
- {
+ if (num_of_time < 0) {
bInfinite = TRUE;
num_of_time = 1;
}
- while (num_of_time)
- {
-
+ while (num_of_time) {
if (currdriverstate == Adapter->DriverState)
TURN_ON_LED(GPIO_Num, uiLedIndex);
currdriverstate != Adapter->DriverState || kthread_should_stop(),
msecs_to_jiffies(timeout));
- if (kthread_should_stop())
- {
+ if (kthread_should_stop()) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
TURN_OFF_LED(GPIO_Num, uiLedIndex);
Status = EVENT_SIGNALED;
break;
}
- if (Status)
- {
+ if (Status) {
TURN_OFF_LED(GPIO_Num, uiLedIndex);
Status = EVENT_SIGNALED;
break;
num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx);
num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx);
- while ((Adapter->device_removed == FALSE))
- {
+ while ((Adapter->device_removed == FALSE)) {
timeout = 50;
/*
* Blink Tx and Rx LED when both Tx and Rx is
* in normal bandwidth
*/
- if (bBlinkBothLED)
- {
+ if (bBlinkBothLED) {
/*
* Assign minimum number of blinks of
* either Tx or Rx.
num_of_time = num_of_time_rx;
else
num_of_time = num_of_time_tx;
- if (num_of_time > 0)
- {
+ if (num_of_time > 0) {
/* Blink both Tx and Rx LEDs */
if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate)
== EVENT_SIGNALED)
- {
return EVENT_SIGNALED;
- }
+
if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time, currdriverstate)
== EVENT_SIGNALED)
- {
return EVENT_SIGNALED;
- }
}
- if (num_of_time == num_of_time_tx)
- {
+ if (num_of_time == num_of_time_tx) {
/* Blink pending rate of Rx */
if (LED_Blink(Adapter, (1 << GPIO_Num_rx), uiRxLedIndex, timeout,
num_of_time_rx-num_of_time, currdriverstate) == EVENT_SIGNALED)
- {
return EVENT_SIGNALED;
- }
+
num_of_time = num_of_time_rx;
- }
- else
- {
+ } else {
/* Blink pending rate of Tx */
if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout,
num_of_time_tx-num_of_time, currdriverstate) == EVENT_SIGNALED)
- {
return EVENT_SIGNALED;
- }
+
num_of_time = num_of_time_tx;
}
- }
- else
- {
- if (num_of_time == num_of_time_tx)
- {
+ } else {
+ if (num_of_time == num_of_time_tx) {
/* Blink pending rate of Rx */
if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate)
== EVENT_SIGNALED)
- {
return EVENT_SIGNALED;
- }
- }
- else
- {
+ } else {
/* Blink pending rate of Tx */
if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout,
num_of_time, currdriverstate) == EVENT_SIGNALED)
- {
return EVENT_SIGNALED;
- }
}
}
* wait till delay completes to 1 second
*/
remDelay = MAX_NUM_OF_BLINKS - num_of_time;
- if (remDelay > 0)
- {
+ if (remDelay > 0) {
timeout = 100 * remDelay;
Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
currdriverstate != Adapter->DriverState || kthread_should_stop(),
msecs_to_jiffies(timeout));
- if (kthread_should_stop())
- {
+ if (kthread_should_stop()) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
return EVENT_SIGNALED;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", ulParamOffset, usParamLen);
puBuffer = kmalloc(usParamLen, GFP_KERNEL);
- if (!puBuffer)
- {
+ if (!puBuffer) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum Allocation failed");
return -ENOMEM;
}
/* Read the DSD data from the parameter offset. */
- if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen))
- {
+ if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
* End of the DSD parameter will have a TWO bytes checksum stored in it.
* Read it and compare with the calculated Checksum.
*/
- if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2))
- {
+ if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
* Compare the checksum calculated with the checksum read
* from DSD section
*/
- if (usChecksumCalculated ^ usChksmOrg)
- {
+ if (usChecksumCalculated ^ usChksmOrg) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum: Checksums don't match");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
BeceemNVMRead(Adapter, (PUINT)&HwParamLen, ulHwParamOffset, 2);
HwParamLen = ntohs(HwParamLen);
if (0 == HwParamLen || HwParamLen > Adapter->uiNVMDSDSize)
- {
return STATUS_IMAGE_CHECKSUM_MISMATCH;
- }
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen);
Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, HwParamLen);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "usEEPROMVersion: Minor:0x%X Major:0x%x", usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF));
- if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION)
- {
+ if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) {
BeceemNVMRead(Adapter, (PUINT)&usHwParamData, EEPROM_HW_PARAM_POINTER_ADDRESS, 2);
usHwParamData = ntohs(usHwParamData);
dwReadValue = usHwParamData;
- }
- else
- {
+ } else {
/*
* Validate Compatibility section and then read HW param
* if compatibility section is valid.
COMPATIBILITY_SECTION_LENGTH_MAP5);
if (Status != STATUS_SUCCESS)
- {
return Status;
- }
+
BeceemNVMRead(Adapter, (PUINT)&dwReadValue, EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4);
dwReadValue = ntohl(dwReadValue);
}
*/
if (dwReadValue < DSD_START_OFFSET ||
dwReadValue > (Adapter->uiNVMDSDSize-DSD_START_OFFSET))
- {
return STATUS_IMAGE_CHECKSUM_MISMATCH;
- }
Status = ValidateHWParmStructure(Adapter, dwReadValue);
- if (Status) {
+ if (Status)
return Status;
- }
/*
* Add DSD_START_OFFSET to the offset read from the EEPROM.
* number to GPIO pin number to GPIO_Array
*/
BeceemNVMRead(Adapter, (UINT *)ucGPIOInfo, dwReadValue, 32);
- for (ucIndex = 0; ucIndex < 32; ucIndex++)
- {
+ for (ucIndex = 0; ucIndex < 32; ucIndex++) {
- switch (ucGPIOInfo[ucIndex])
- {
+ switch (ucGPIOInfo[ucIndex]) {
case RED_LED:
- {
GPIO_Array[RED_LED] = ucIndex;
Adapter->gpioBitMap |= (1 << ucIndex);
break;
- }
case BLUE_LED:
- {
GPIO_Array[BLUE_LED] = ucIndex;
Adapter->gpioBitMap |= (1 << ucIndex);
break;
- }
case YELLOW_LED:
- {
GPIO_Array[YELLOW_LED] = ucIndex;
Adapter->gpioBitMap |= (1 << ucIndex);
break;
- }
case GREEN_LED:
- {
GPIO_Array[GREEN_LED] = ucIndex;
Adapter->gpioBitMap |= (1 << ucIndex);
break;
- }
default:
break;
}
UCHAR bData = 0;
memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1);
- if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams))
- {
+ if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) {
BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n");
return -ENOENT;
}
/* Populate GPIO_Array with GPIO numbers for LED functions */
/* Read the GPIO numbers from EEPROM */
Status = ReadLEDInformationFromEEPROM(Adapter, GPIO_Array);
- if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH)
- {
+ if (Status == STATUS_IMAGE_CHECKSUM_MISMATCH) {
*bEnableThread = FALSE;
return STATUS_SUCCESS;
- }
- else if (Status)
- {
+ } else if (Status) {
*bEnableThread = FALSE;
return Status;
}
* driver state and LED blink state.
*/
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
bData = *puCFGData;
/*
* Check Bit 8 for polarity. If it is set,
* polarity is reverse polarity
*/
- if (bData & 0x80)
- {
+ if (bData & 0x80) {
Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 0;
/* unset the bit 8 */
bData = bData & 0x7f;
* Check if all the LED settings are disabled. If it is disabled,
* dont launch the LED control thread.
*/
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if ((Adapter->LEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) ||
(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) ||
(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0))
/* Set all LED GPIO Mode to output mode */
if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0)
BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: RDM Failed\n");
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);
TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, uiIndex);
*GPIO_num_tx = DISABLE_GPIO_NUM;
*GPIO_num_rx = DISABLE_GPIO_NUM;
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if ((currdriverstate == NORMAL_OPERATION) ||
(currdriverstate == IDLEMODE_EXIT) ||
- (currdriverstate == FW_DOWNLOAD))
- {
- if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate)
- {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
- {
- if (*GPIO_num_tx == DISABLE_GPIO_NUM)
- {
+ (currdriverstate == FW_DOWNLOAD)) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) {
+ if (*GPIO_num_tx == DISABLE_GPIO_NUM) {
*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
*uiLedTxIndex = uiIndex;
- }
- else
- {
+ } else {
*GPIO_num_rx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
*uiLedRxIndex = uiIndex;
}
}
}
- }
- else
- {
- if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate)
- {
- if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
- {
+ } else {
+ if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) {
+ if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) {
*GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num;
*uiLedTxIndex = uiIndex;
}
GPIO_num = DISABLE_GPIO_NUM;
- while (TRUE)
- {
+ while (TRUE) {
/* Wait till event is triggered */
if ((GPIO_num == DISABLE_GPIO_NUM)
||
(currdriverstate != LOWPOWER_MODE_ENTER))
||
(currdriverstate == LED_THREAD_INACTIVE))
- {
Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event,
currdriverstate != Adapter->DriverState || kthread_should_stop());
- }
- if (kthread_should_stop() || Adapter->device_removed)
- {
+ if (kthread_should_stop() || Adapter->device_removed) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
}
if (GPIO_num != DISABLE_GPIO_NUM)
- {
TURN_OFF_LED(1 << GPIO_num, uiLedIndex);
- }
- if (Adapter->LEDInfo.bLedInitDone == FALSE)
- {
+ if (Adapter->LEDInfo.bLedInitDone == FALSE) {
LedGpioInit(Adapter);
Adapter->LEDInfo.bLedInitDone = TRUE;
}
- switch (Adapter->DriverState)
- {
+ switch (Adapter->DriverState) {
case DRIVER_INIT:
- {
currdriverstate = DRIVER_INIT;
/* Adapter->DriverState; */
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
- {
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
- }
- }
+
break;
case FW_DOWNLOAD:
- {
/*
* BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS,
* LED_DUMP_INFO, DBG_LVL_ALL,
currdriverstate = FW_DOWNLOAD;
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
- if (GPIO_num != DISABLE_GPIO_NUM)
- {
+ if (GPIO_num != DISABLE_GPIO_NUM) {
timeout = 50;
LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex, timeout, -1, currdriverstate);
}
- }
break;
case FW_DOWNLOAD_DONE:
- {
currdriverstate = FW_DOWNLOAD_DONE;
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
- {
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
- }
- }
break;
case SHUTDOWN_EXIT:
* state as well.
*/
case NO_NETWORK_ENTRY:
- {
currdriverstate = NO_NETWORK_ENTRY;
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyGPIONum, currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
- {
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
- }
- }
break;
case NORMAL_OPERATION:
{
- UCHAR GPIO_num_tx = DISABLE_GPIO_NUM;
- UCHAR GPIO_num_rx = DISABLE_GPIO_NUM;
- UCHAR uiLEDTx = 0;
- UCHAR uiLEDRx = 0;
- currdriverstate = NORMAL_OPERATION;
- Adapter->LEDInfo.bIdle_led_off = FALSE;
-
- BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate);
- if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM))
- {
- GPIO_num = DISABLE_GPIO_NUM;
- }
- else
- {
- /*
- * If single LED is selected, use same
- * for both Tx and Rx
- */
- if (GPIO_num_tx == DISABLE_GPIO_NUM)
- {
- GPIO_num_tx = GPIO_num_rx;
- uiLEDTx = uiLEDRx;
- }
- else if (GPIO_num_rx == DISABLE_GPIO_NUM)
- {
- GPIO_num_rx = GPIO_num_tx;
- uiLEDRx = uiLEDTx;
+ UCHAR GPIO_num_tx = DISABLE_GPIO_NUM;
+ UCHAR GPIO_num_rx = DISABLE_GPIO_NUM;
+ UCHAR uiLEDTx = 0;
+ UCHAR uiLEDRx = 0;
+ currdriverstate = NORMAL_OPERATION;
+ Adapter->LEDInfo.bIdle_led_off = FALSE;
+
+ BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate);
+ if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) {
+ GPIO_num = DISABLE_GPIO_NUM;
+ } else {
+ /*
+ * If single LED is selected, use same
+ * for both Tx and Rx
+ */
+ if (GPIO_num_tx == DISABLE_GPIO_NUM) {
+ GPIO_num_tx = GPIO_num_rx;
+ uiLEDTx = uiLEDRx;
+ } else if (GPIO_num_rx == DISABLE_GPIO_NUM) {
+ GPIO_num_rx = GPIO_num_tx;
+ uiLEDRx = uiLEDTx;
+ }
+ /*
+ * Blink the LED in proportionate
+ * to Tx and Rx transmissions.
+ */
+ LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate);
}
- /*
- * Blink the LED in proportionate
- * to Tx and Rx transmissions.
- */
- LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate);
- }
}
break;
case LOWPOWER_MODE_ENTER:
- {
currdriverstate = LOWPOWER_MODE_ENTER;
- if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode)
- {
+ if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) {
/* Turn OFF all the LED */
uiResetValue = 0;
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
}
wake_up(&Adapter->LEDInfo.idleModeSyncEvent);
GPIO_num = DISABLE_GPIO_NUM;
break;
- }
case IDLEMODE_CONTINUE:
- {
currdriverstate = IDLEMODE_CONTINUE;
GPIO_num = DISABLE_GPIO_NUM;
- }
break;
case IDLEMODE_EXIT:
- {
- }
break;
case DRIVER_HALT:
- {
currdriverstate = DRIVER_HALT;
GPIO_num = DISABLE_GPIO_NUM;
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
}
/* Adapter->DriverState = DRIVER_INIT; */
- }
break;
case LED_THREAD_INACTIVE:
- {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "InActivating LED thread...");
currdriverstate = LED_THREAD_INACTIVE;
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY;
Adapter->LEDInfo.bLedInitDone = FALSE;
/* disable ALL LED */
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
- {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num !=
DISABLE_GPIO_NUM)
TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex);
}
- }
break;
case LED_THREAD_ACTIVE:
- {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Activating LED thread again...");
if (Adapter->LinkUpStatus == FALSE)
Adapter->DriverState = NO_NETWORK_ENTRY;
Adapter->DriverState = NORMAL_OPERATION;
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY;
- }
break;
/* return; */
default:
* is used to change the polarity of the LED.
*/
- for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
+ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++)
Adapter->LEDInfo.LEDState[uiIndex].BitPolarity = 1;
- }
/*
* Read the LED settings of CONFIG file and map it
* to GPIO numbers in EEPROM
*/
Status = ReadConfigFileStructure(Adapter, &bEnableThread);
- if (STATUS_SUCCESS != Status)
- {
+ if (STATUS_SUCCESS != Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: FAILED in ReadConfigFileStructure\n");
return Status;
}
- if (Adapter->LEDInfo.led_thread_running)
- {
- if (bEnableThread)
+ if (Adapter->LEDInfo.led_thread_running) {
+ if (bEnableThread) {
;
- else
- {
+ } else {
Adapter->DriverState = DRIVER_HALT;
wake_up(&Adapter->LEDInfo.notify_led_event);
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
}
- }
-
- else if (bEnableThread)
- {
+ } else if (bEnableThread) {
/* Create secondary thread to handle the LEDs */
init_waitqueue_head(&Adapter->LEDInfo.notify_led_event);
init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent);
Adapter->LEDInfo.bIdle_led_off = FALSE;
Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *))
LEDControlThread, Adapter, "led_control_thread");
- if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid))
- {
+ if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n");
Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED;
return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid);
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff