ARM: restart: sa1100: use new restart hook

Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 3dd133f..6b93e20 100644 (file)
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -455,4 +455,5 @@ MACHINE_START(ASSABET, "Intel-Assabet")
 #ifdef CONFIG_SA1111
        .dma_zone_size  = SZ_1M,
 #endif
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bda83e1..b07a2c0 100644 (file)
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -309,4 +309,5 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
 #ifdef CONFIG_SA1111
        .dma_zone_size  = SZ_1M,
 #endif
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b..11bb6d0 100644 (file)
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -139,4 +139,5 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
        .init_irq       = cerf_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = cerf_init,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2965cc9..b9060e2 100644 (file)
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -387,4 +387,5 @@ MACHINE_START(COLLIE, "Sharp-Collie")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = collie_init,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5fa5ae1..bb10ee2 100644 (file)
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -126,6 +126,17 @@ static void sa1100_power_off(void)
        PMCR = PMCR_SF;
 }
 
+void sa11x0_restart(char mode, const char *cmd)
+{
+       if (mode == 's') {
+               /* Jump into ROM at address 0 */
+               soft_restart(0);
+       } else {
+               /* Use on-chip reset capability */
+               RSRR = RSRR_SWR;
+       }
+}
+
 static void sa11x0_register_device(struct platform_device *dev, void *data)
 {
        int err;

diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index b7a9a60..33268cf 100644 (file)
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -10,6 +10,7 @@ extern struct sys_timer sa1100_timer;
 extern void __init sa1100_map_io(void);
 extern void __init sa1100_init_irq(void);
 extern void __init sa1100_init_gpio(void);
+extern void sa11x0_restart(char, const char *);
 
 #define SET_BANK(__nr,__start,__size) \
        mi->bank[__nr].start = (__start), \

diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b30733a..1e6b3c1 100644 (file)
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -89,5 +89,6 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = h3100_mach_init,
+       .restart        = sa11x0_restart,
 MACHINE_END
 

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6fd324d..6b58e74 100644 (file)
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -130,5 +130,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = h3600_mach_init,
+       .restart        = sa11x0_restart,
 MACHINE_END
 

diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 30f4a55..c01bb36 100644 (file)
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -200,4 +200,5 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = hackkit_init,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 345d35b..3c3e842 100644 (file)
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -3,8 +3,6 @@
  *
  * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
        cpu_do_idle();
@@ -12,11 +10,4 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-       if (mode == 's') {
-               /* Jump into ROM at address 0 */
-               soft_restart(0);
-       } else {
-               /* Use on-chip reset capability */
-               RSRR = RSRR_SWR;
-       }
 }

diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 77198fe..ee121d6 100644 (file)
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -373,4 +373,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 #ifdef CONFIG_SA1111
        .dma_zone_size  = SZ_1M,
 #endif
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 5bc59d0..af4e276 100644 (file)
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -66,4 +66,5 @@ MACHINE_START(LART, "LART")
        .init_irq       = sa1100_init_irq,
        .init_machine   = lart_init,
        .timer          = &sa1100_timer,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 032f388..ed77f85 100644 (file)
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -116,4 +116,5 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = nanoengine_init,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 65161f2..9307df0 100644 (file)
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -150,4 +150,5 @@ MACHINE_START(PLEB, "PLEB")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = pleb_init,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 1cccbf5..318b2b7 100644 (file)
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -87,4 +87,5 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
        .init_machine   = shannon_init,
+       .restart        = sa11x0_restart,
 MACHINE_END

diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 4790f3f..e17c04d 100644 (file)
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,4 +396,5 @@ MACHINE_START(SIMPAD, "Simpad")
        .map_io         = simpad_map_io,
        .init_irq       = sa1100_init_irq,
        .timer          = &sa1100_timer,
+       .restart        = sa11x0_restart,
 MACHINE_END