mpc83xx: set 64BIT_VSPRINTF for boards using nand_util

When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Ron Madrid <ron_madrid@sbcglobal.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 2308568..5149ce7 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -236,6 +236,7 @@
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index e03a107..4cf48f7 100644 (file)
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -226,6 +226,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_BR1_PRELIM  ( CONFIG_SYS_NAND_BASE \
                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index f584435..4fcca09 100644 (file)
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -212,6 +212,7 @@
 #define CONFIG_NAND_FSL_UPM    1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM    CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM     0x8000001b /* Access window size 4K */

diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 72fe115..08b401e 100644 (file)
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -131,6 +131,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND                1
 #define CONFIG_NAND_FSL_ELBC           1
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00100000