media: i2c: Kconfig: move camera drivers to the top

The camera drivers are the ones that suffer additions/changes
on those days. Place them on the top of the I2C drivers.

Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 14fe94f..fae2baa 100644 (file)
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -22,1559 +22,1559 @@ config VIDEO_IR_I2C
          In doubt, say Y.
 
 #
-# V4L2 I2C drivers that aren't related with Camera support
-#
-
-comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
-       depends on MEDIA_HIDE_ANCILLARY_SUBDRV
-#
-# Encoder / Decoder module configuration
+# V4L2 I2C drivers that are related with Camera support
 #
 
-menu "Audio decoders, processors and mixers"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+menu "Camera sensor devices"
+       visible if MEDIA_CAMERA_SUPPORT
 
-config VIDEO_CS3308
-       tristate "Cirrus Logic CS3308 audio ADC"
-       depends on VIDEO_DEV && I2C
-       help
-         Support for the Cirrus Logic CS3308 High Performance 8-Channel
-         Analog Volume Control
+config VIDEO_APTINA_PLL
+       tristate
 
-         To compile this driver as a module, choose M here: the
-         module will be called cs3308.
+config VIDEO_CCS_PLL
+       tristate
 
-config VIDEO_CS5345
-       tristate "Cirrus Logic CS5345 audio ADC"
-       depends on VIDEO_DEV && I2C
+config VIDEO_HI556
+       tristate "Hynix Hi-556 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for the Cirrus Logic CS5345 24-bit, 192 kHz
-         stereo A/D converter.
+         This is a Video4Linux2 sensor driver for the Hynix
+         Hi-556 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called cs5345.
+         module will be called hi556.
 
-config VIDEO_CS53L32A
-       tristate "Cirrus Logic CS53L32A audio ADC"
-       depends on VIDEO_DEV && I2C
+config VIDEO_HI846
+       tristate "Hynix Hi-846 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for the Cirrus Logic CS53L32A low voltage
-         stereo A/D converter.
+         This is a Video4Linux2 sensor driver for the Hynix
+         Hi-846 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called cs53l32a.
+         module will be called hi846.
 
-config VIDEO_MSP3400
-       tristate "Micronas MSP34xx audio decoders"
-       depends on VIDEO_DEV && I2C
-       help
-         Support for the Micronas MSP34xx series of audio decoders.
+config VIDEO_HI847
+        tristate "Hynix Hi-847 sensor support"
+        depends on I2C && VIDEO_DEV
+        select MEDIA_CONTROLLER
+        select VIDEO_V4L2_SUBDEV_API
+        select V4L2_FWNODE
+        help
+          This is a Video4Linux2 sensor driver for the Hynix
+          Hi-847 camera.
 
-         To compile this driver as a module, choose M here: the
-         module will be called msp3400.
+          To compile this driver as a module, choose M here: the
+          module will be called hi847.
 
-config VIDEO_SONY_BTF_MPX
-       tristate "Sony BTF's internal MPX"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX208
+       tristate "Sony IMX208 sensor support"
+       depends on I2C && VIDEO_DEV && VIDEO_V4L2_SUBDEV_API
+       depends on MEDIA_CAMERA_SUPPORT
        help
-         Support for the internal MPX of the Sony BTF-PG472Z tuner.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX208 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called sony-btf-mpx.
+         module will be called imx208.
 
-config VIDEO_TDA1997X
-       tristate "NXP TDA1997x HDMI receiver"
-       depends on VIDEO_DEV && I2C
-       depends on SND_SOC
-       select HDMI
-       select SND_PCM
+config VIDEO_IMX214
+       tristate "Sony IMX214 sensor support"
+       depends on GPIOLIB && I2C && VIDEO_DEV
        select V4L2_FWNODE
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
+       select REGMAP_I2C
        help
-         V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
-
-         To compile this driver as a module, choose M here: the
-         module will be called tda1997x.
-
-config VIDEO_TDA7432
-       tristate "Philips TDA7432 audio processor"
-       depends on VIDEO_DEV && I2C
-       help
-         Support for tda7432 audio decoder chip found on some bt8xx boards.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX214 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tda7432.
+         module will be called imx214.
 
-config VIDEO_TDA9840
-       tristate "Philips TDA9840 audio processor"
-       depends on I2C
+config VIDEO_IMX219
+       tristate "Sony IMX219 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for tda9840 audio decoder chip found on some Zoran boards.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX219 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tda9840.
+         module will be called imx219.
 
-config VIDEO_TEA6415C
-       tristate "Philips TEA6415C audio processor"
-       depends on I2C
+config VIDEO_IMX258
+       tristate "Sony IMX258 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        help
-         Support for tea6415c audio decoder chip found on some bt8xx boards.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX258 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tea6415c.
+         module will be called imx258.
 
-config VIDEO_TEA6420
-       tristate "Philips TEA6420 audio processor"
-       depends on I2C
+config VIDEO_IMX274
+       tristate "Sony IMX274 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select REGMAP_I2C
        help
-         Support for tea6420 audio decoder chip found on some bt8xx boards.
-
-         To compile this driver as a module, choose M here: the
-         module will be called tea6420.
+         This is a V4L2 sensor driver for the Sony IMX274
+         CMOS image sensor.
 
-config VIDEO_TLV320AIC23B
-       tristate "Texas Instruments TLV320AIC23B audio codec"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX290
+       tristate "Sony IMX290 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select REGMAP_I2C
+       select V4L2_FWNODE
        help
-         Support for the Texas Instruments TLV320AIC23B audio codec.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX290 camera sensor.
 
          To compile this driver as a module, choose M here: the
-         module will be called tlv320aic23b.
+         module will be called imx290.
 
-config VIDEO_TVAUDIO
-       tristate "Simple audio decoder chips"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX319
+       tristate "Sony IMX319 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        help
-         Support for several audio decoder chips found on some bt8xx boards:
-         Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
-                  tea6320, tea6420, tda8425, ta8874z.
-         Microchip: pic16c54 based design on ProVideo PV951 board.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX319 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tvaudio.
+         module will be called imx319.
 
-config VIDEO_UDA1342
-       tristate "Philips UDA1342 audio codec"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX334
+       tristate "Sony IMX334 sensor support"
+       depends on OF_GPIO
+       depends on I2C && VIDEO_DEV
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
+       select V4L2_FWNODE
        help
-         Support for the Philips UDA1342 audio codec.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX334 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called uda1342.
+         module will be called imx334.
 
-config VIDEO_VP27SMPX
-       tristate "Panasonic VP27's internal MPX"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX335
+       tristate "Sony IMX335 sensor support"
+       depends on OF_GPIO
+       depends on I2C && VIDEO_DEV
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
+       select V4L2_FWNODE
        help
-         Support for the internal MPX of the Panasonic VP27s tuner.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX335 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called vp27smpx.
+         module will be called imx335.
 
-config VIDEO_WM8739
-       tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX355
+       tristate "Sony IMX355 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        help
-         Support for the Wolfson Microelectronics WM8739
-         stereo A/D Converter.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX355 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called wm8739.
+         module will be called imx355.
 
-config VIDEO_WM8775
-       tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
-       depends on VIDEO_DEV && I2C
+config VIDEO_IMX412
+       tristate "Sony IMX412 sensor support"
+       depends on OF_GPIO
+       depends on I2C && VIDEO_DEV
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
+       select V4L2_FWNODE
        help
-         Support for the Wolfson Microelectronics WM8775 high
-         performance stereo A/D Converter with a 4 channel input mixer.
+         This is a Video4Linux2 sensor driver for the Sony
+         IMX412 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called wm8775.
-
-endmenu
-
-menu "RDS decoders"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+         module will be called imx412.
 
-config VIDEO_SAA6588
-       tristate "SAA6588 Radio Chip RDS decoder support"
-       depends on VIDEO_DEV && I2C
+config VIDEO_MAX9271_LIB
+       tristate
 
+config VIDEO_MT9M001
+       tristate "mt9m001 support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        help
-         Support for this Radio Data System (RDS) decoder. This allows
-         seeing radio station identification transmitted using this
-         standard.
-
-         To compile this driver as a module, choose M here: the
-         module will be called saa6588.
-
-endmenu
-
-menu "Video decoders"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+         This driver supports MT9M001 cameras from Micron, monochrome
+         and colour models.
 
-config VIDEO_ADV7180
-       tristate "Analog Devices ADV7180 decoder"
-       depends on GPIOLIB && VIDEO_DEV && I2C
+config VIDEO_MT9M032
+       tristate "MT9M032 camera sensor support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_ASYNC
+       select VIDEO_APTINA_PLL
        help
-         Support for the Analog Devices ADV7180 video decoder.
-
-         To compile this driver as a module, choose M here: the
-         module will be called adv7180.
+         This driver supports MT9M032 camera sensors from Aptina, monochrome
+         models only.
 
-config VIDEO_ADV7183
-       tristate "Analog Devices ADV7183 decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_MT9M111
+       tristate "mt9m111, mt9m112 and mt9m131 support"
+       depends on I2C && VIDEO_DEV
+       select V4L2_FWNODE
        help
-         V4l2 subdevice driver for the Analog Devices
-         ADV7183 video decoder.
-
-         To compile this driver as a module, choose M here: the
-         module will be called adv7183.
+         This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+         Micron/Aptina
 
-config VIDEO_ADV748X
-       tristate "Analog Devices ADV748x decoder"
-       depends on VIDEO_DEV && I2C
-       depends on OF
+config VIDEO_MT9P031
+       tristate "Aptina MT9P031 support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select REGMAP_I2C
+       select VIDEO_APTINA_PLL
        select V4L2_FWNODE
        help
-         V4L2 subdevice driver for the Analog Devices
-         ADV7481 and ADV7482 HDMI/Analog video decoders.
-
-         To compile this driver as a module, choose M here: the
-         module will be called adv748x.
+         This is a Video4Linux2 sensor driver for the Aptina
+         (Micron) mt9p031 5 Mpixel camera.
 
-config VIDEO_ADV7604
-       tristate "Analog Devices ADV7604 decoder"
-       depends on VIDEO_DEV && I2C
-       depends on GPIOLIB || COMPILE_TEST
+config VIDEO_MT9T001
+       tristate "Aptina MT9T001 support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select REGMAP_I2C
-       select HDMI
-       select V4L2_FWNODE
        help
-         Support for the Analog Devices ADV7604 video decoder.
+         This is a Video4Linux2 sensor driver for the Aptina
+         (Micron) mt0t001 3 Mpixel camera.
 
-         This is a Analog Devices Component/Graphics Digitizer
-         with 4:1 Multiplexed HDMI Receiver.
+config VIDEO_MT9T112
+       tristate "Aptina MT9T111/MT9T112 support"
+       depends on I2C && VIDEO_DEV
+       help
+         This is a Video4Linux2 sensor driver for the Aptina
+         (Micron) MT9T111 and MT9T112 3 Mpixel camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called adv7604.
+         module will be called mt9t112.
 
-config VIDEO_ADV7604_CEC
-       bool "Enable Analog Devices ADV7604 CEC support"
-       depends on VIDEO_ADV7604
-       select CEC_CORE
+config VIDEO_MT9V011
+       tristate "Micron mt9v011 sensor support"
+       depends on I2C && VIDEO_DEV
        help
-         When selected the adv7604 will support the optional
-         HDMI CEC feature.
+         This is a Video4Linux2 sensor driver for the Micron
+         mt0v011 1.3 Mpixel camera.  It currently only works with the
+         em28xx driver.
 
-config VIDEO_ADV7842
-       tristate "Analog Devices ADV7842 decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_MT9V032
+       tristate "Micron MT9V032 sensor support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select HDMI
+       select REGMAP_I2C
+       select V4L2_FWNODE
        help
-         Support for the Analog Devices ADV7842 video decoder.
+         This is a Video4Linux2 sensor driver for the Micron
+         MT9V032 752x480 CMOS sensor.
 
-         This is a Analog Devices Component/Graphics/SD Digitizer
-         with 2:1 Multiplexed HDMI Receiver.
+config VIDEO_MT9V111
+       tristate "Aptina MT9V111 sensor support"
+       depends on I2C && VIDEO_DEV
+       help
+         This is a Video4Linux2 sensor driver for the Aptina/Micron
+         MT9V111 sensor.
 
          To compile this driver as a module, choose M here: the
-         module will be called adv7842.
+         module will be called mt9v111.
 
-config VIDEO_ADV7842_CEC
-       bool "Enable Analog Devices ADV7842 CEC support"
-       depends on VIDEO_ADV7842
-       select CEC_CORE
+config VIDEO_NOON010PC30
+       tristate "Siliconfile NOON010PC30 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        help
-         When selected the adv7842 will support the optional
-         HDMI CEC feature.
+         This driver supports NOON010PC30 CIF camera from Siliconfile
 
-config VIDEO_BT819
-       tristate "BT819A VideoStream decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OG01A1B
+       tristate "OmniVision OG01A1B sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for BT819A video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OG01A1B camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called bt819.
+         module will be called og01a1b.
 
-config VIDEO_BT856
-       tristate "BT856 VideoStream decoder"
+config VIDEO_OV02A10
+       tristate "OmniVision OV02A10 sensor support"
        depends on VIDEO_DEV && I2C
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for BT856 video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV02A10 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called bt856.
+         module will be called ov02a10.
 
-config VIDEO_BT866
-       tristate "BT866 VideoStream decoder"
-       depends on VIDEO_DEV && I2C
-       help
-         Support for BT866 video decoder.
+config VIDEO_OV08D10
+        tristate "OmniVision OV08D10 sensor support"
+        depends on I2C && VIDEO_DEV
+        select MEDIA_CONTROLLER
+        select VIDEO_V4L2_SUBDEV_API
+        select V4L2_FWNODE
+        help
+          This is a Video4Linux2 sensor driver for the OmniVision
+          OV08D10 camera sensor.
 
-         To compile this driver as a module, choose M here: the
-         module will be called bt866.
+          To compile this driver as a module, choose M here: the
+          module will be called ov08d10.
 
-config VIDEO_ISL7998X
-       tristate "Intersil ISL7998x video decoder"
-       depends on VIDEO_DEV && I2C
-       depends on OF_GPIO
+config VIDEO_OV13858
+       tristate "OmniVision OV13858 sensor support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for Intersil ISL7998x analog to MIPI-CSI2 or
-         BT.656 decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV13858 camera.
 
-config VIDEO_KS0127
-       tristate "KS0127 video decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV13B10
+       tristate "OmniVision OV13B10 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for KS0127 video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV13B10 camera.
 
-         This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
-         cards.
+config VIDEO_OV2640
+       tristate "OmniVision OV2640 sensor support"
+       depends on VIDEO_DEV && I2C
+       help
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV2640 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called ks0127.
+         module will be called ov2640.
 
-config VIDEO_MAX9286
-       tristate "Maxim MAX9286 GMSL deserializer support"
-       depends on I2C && I2C_MUX
-       depends on VIDEO_DEV
-       depends on OF_GPIO
+config VIDEO_OV2659
+       tristate "OmniVision OV2659 sensor support"
+       depends on VIDEO_DEV && I2C && GPIOLIB
        select V4L2_FWNODE
-       select VIDEO_V4L2_SUBDEV_API
-       select MEDIA_CONTROLLER
        help
-         This driver supports the Maxim MAX9286 GMSL deserializer.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV2659 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called max9286.
+         module will be called ov2659.
 
-config VIDEO_ML86V7667
-       tristate "OKI ML86V7667 video decoder"
+config VIDEO_OV2680
+       tristate "OmniVision OV2680 sensor support"
        depends on VIDEO_DEV && I2C
+       select MEDIA_CONTROLLER
+       select V4L2_FWNODE
        help
-         Support for the OKI Semiconductor ML86V7667 video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV2680 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called ml86v7667.
+         module will be called ov2680.
 
-config VIDEO_SAA7110
-       tristate "Philips SAA7110 video decoder"
+config VIDEO_OV2685
+       tristate "OmniVision OV2685 sensor support"
        depends on VIDEO_DEV && I2C
+       select MEDIA_CONTROLLER
+       select V4L2_FWNODE
        help
-         Support for the Philips SAA7110 video decoders.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV2685 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called saa7110.
+         module will be called ov2685.
 
-config VIDEO_SAA711X
-       tristate "Philips SAA7111/3/4/5 video decoders"
+config VIDEO_OV2740
+       tristate "OmniVision OV2740 sensor support"
        depends on VIDEO_DEV && I2C
+       depends on ACPI || COMPILE_TEST
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
+       select REGMAP_I2C
        help
-         Support for the Philips SAA7111/3/4/5 video decoders.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV2740 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called saa7115.
+         module will be called ov2740.
 
-config VIDEO_TC358743
-       tristate "Toshiba TC358743 decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV5640
+       tristate "OmniVision OV5640 sensor support"
+       depends on OF
+       depends on GPIOLIB && VIDEO_DEV && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select HDMI
        select V4L2_FWNODE
        help
-         Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
+         This is a Video4Linux2 sensor driver for the Omnivision
+         OV5640 camera sensor with a MIPI CSI-2 interface.
+
+config VIDEO_OV5645
+       tristate "OmniVision OV5645 sensor support"
+       depends on OF
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
+       help
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5645 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tc358743.
+         module will be called ov5645.
 
-config VIDEO_TC358743_CEC
-       bool "Enable Toshiba TC358743 CEC support"
-       depends on VIDEO_TC358743
-       select CEC_CORE
+config VIDEO_OV5647
+       tristate "OmniVision OV5647 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         When selected the tc358743 will support the optional
-         HDMI CEC feature.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5647 camera.
 
-config VIDEO_TVP514X
-       tristate "Texas Instruments TVP514x video decoder"
-       depends on VIDEO_DEV && I2C
+         To compile this driver as a module, choose M here: the
+         module will be called ov5647.
+
+config VIDEO_OV5648
+       tristate "OmniVision OV5648 sensor support"
+       depends on I2C && PM && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the TI TVP5146/47
-         decoder. It is currently working with the TI OMAP3 camera
-         controller.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5648 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tvp514x.
+         module will be called ov5648.
 
-config VIDEO_TVP5150
-       tristate "Texas Instruments TVP5150 video decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV5670
+       tristate "OmniVision OV5670 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
-       select REGMAP_I2C
        help
-         Support for the Texas Instruments TVP5150 video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5670 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tvp5150.
+         module will be called ov5670.
 
-config VIDEO_TVP7002
-       tristate "Texas Instruments TVP7002 video decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV5675
+       tristate "OmniVision OV5675 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
-         Support for the Texas Instruments TVP7002 video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5675 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tvp7002.
+         module will be called ov5675.
 
-config VIDEO_TW2804
-       tristate "Techwell TW2804 multiple video decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV5693
+       tristate "OmniVision OV5693 sensor support"
+       depends on I2C && VIDEO_DEV
+       select V4L2_FWNODE
        help
-         Support for the Techwell tw2804 multiple video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5693 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tw2804.
+         module will be called ov5693.
 
-config VIDEO_TW9903
-       tristate "Techwell TW9903 video decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV5695
+       tristate "OmniVision OV5695 sensor support"
+       depends on I2C && VIDEO_DEV
+       select V4L2_FWNODE
        help
-         Support for the Techwell tw9903 multi-standard video decoder
-         with high quality down scaler.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV5695 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tw9903.
+         module will be called ov5695.
 
-config VIDEO_TW9906
-       tristate "Techwell TW9906 video decoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV6650
+       tristate "OmniVision OV6650 sensor support"
+       depends on I2C && VIDEO_DEV
        help
-         Support for the Techwell tw9906 enhanced multi-standard comb filter
-         video decoder with YCbCr input support.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV6650 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tw9906.
+         module will be called ov6650.
 
-config VIDEO_TW9910
-       tristate "Techwell TW9910 video decoder"
-       depends on VIDEO_DEV && I2C
-       select V4L2_ASYNC
+config VIDEO_OV7251
+       tristate "OmniVision OV7251 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV7251 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called tw9910.
+         module will be called ov7251.
 
-config VIDEO_VPX3220
-       tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV7640
+       tristate "OmniVision OV7640 sensor support"
+       depends on I2C && VIDEO_DEV
        help
-         Support for VPX322x video decoders.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV7640 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called vpx3220.
+         module will be called ov7640.
 
-comment "Video and audio decoders"
+config VIDEO_OV7670
+       tristate "OmniVision OV7670 sensor support"
+       depends on I2C && VIDEO_DEV
+       select V4L2_FWNODE
+       help
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV7670 VGA camera.  It currently only works with the M88ALP01
+         controller.
 
-config VIDEO_SAA717X
-       tristate "Philips SAA7171/3/4 audio/video decoders"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV772X
+       tristate "OmniVision OV772x sensor support"
+       depends on I2C && VIDEO_DEV
+       select REGMAP_SCCB
+       select V4L2_FWNODE
        help
-         Support for the Philips SAA7171/3/4 audio/video decoders.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV772x camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called saa717x.
-
-source "drivers/media/i2c/cx25840/Kconfig"
-
-endmenu
+         module will be called ov772x.
 
-menu "Video encoders"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+config VIDEO_OV7740
+       tristate "OmniVision OV7740 sensor support"
+       depends on I2C && VIDEO_DEV
+       select REGMAP_SCCB
+       help
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV7740 VGA camera sensor.
 
-config VIDEO_AD9389B
-       tristate "Analog Devices AD9389B encoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV8856
+       tristate "OmniVision OV8856 sensor support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-
-       help
-         Support for the Analog Devices AD9389B video encoder.
-
-         This is a Analog Devices HDMI transmitter.
-
-         To compile this driver as a module, choose M here: the
-         module will be called ad9389b.
-
-config VIDEO_ADV7170
-       tristate "Analog Devices ADV7170 video encoder"
-       depends on VIDEO_DEV && I2C
+       select V4L2_FWNODE
        help
-         Support for the Analog Devices ADV7170 video encoder driver
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV8856 camera sensor.
 
          To compile this driver as a module, choose M here: the
-         module will be called adv7170.
+         module will be called ov8856.
 
-config VIDEO_ADV7175
-       tristate "Analog Devices ADV7175 video encoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_OV8865
+       tristate "OmniVision OV8865 sensor support"
+       depends on I2C && PM && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for the Analog Devices ADV7175 video encoder driver
+         This is a Video4Linux2 sensor driver for OmniVision
+         OV8865 camera sensor.
 
          To compile this driver as a module, choose M here: the
-         module will be called adv7175.
+         module will be called ov8865.
 
-config VIDEO_ADV7343
-       tristate "ADV7343 video encoder"
-       depends on I2C
-       select V4L2_ASYNC
+config VIDEO_OV9282
+       tristate "OmniVision OV9282 sensor support"
+       depends on OF_GPIO
+       depends on I2C && VIDEO_DEV
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
+       select V4L2_FWNODE
        help
-         Support for Analog Devices I2C bus based ADV7343 encoder.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV9282 camera sensor.
 
          To compile this driver as a module, choose M here: the
-         module will be called adv7343.
+         module will be called ov9282.
 
-config VIDEO_ADV7393
-       tristate "ADV7393 video encoder"
-       depends on I2C
+config VIDEO_OV9640
+       tristate "OmniVision OV9640 sensor support"
+       depends on I2C && VIDEO_DEV
        help
-         Support for Analog Devices I2C bus based ADV7393 encoder.
-
-         To compile this driver as a module, choose M here: the
-         module will be called adv7393.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV9640 camera sensor.
 
-config VIDEO_ADV7511
-       tristate "Analog Devices ADV7511 encoder"
-       depends on VIDEO_DEV && I2C
-       depends on DRM_I2C_ADV7511=n || COMPILE_TEST
+config VIDEO_OV9650
+       tristate "OmniVision OV9650/OV9652 sensor support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select HDMI
+       select REGMAP_SCCB
        help
-         Support for the Analog Devices ADV7511 video encoder.
-
-         This is a Analog Devices HDMI transmitter.
-
-         To compile this driver as a module, choose M here: the
-         module will be called adv7511.
-
-config VIDEO_ADV7511_CEC
-       bool "Enable Analog Devices ADV7511 CEC support"
-       depends on VIDEO_ADV7511
-       select CEC_CORE
-       help
-         When selected the adv7511 will support the optional
-         HDMI CEC feature.
-
-config VIDEO_AK881X
-       tristate "AK8813/AK8814 video encoders"
-       depends on I2C
-       help
-         Video output driver for AKM AK8813 and AK8814 TV encoders
+         This is a V4L2 sensor driver for the Omnivision
+         OV9650 and OV9652 camera sensors.
 
-config VIDEO_SAA7127
-       tristate "Philips SAA7127/9 digital video encoders"
+config VIDEO_OV9734
+       tristate "OmniVision OV9734 sensor support"
        depends on VIDEO_DEV && I2C
+       depends on ACPI || COMPILE_TEST
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for the Philips SAA7127/9 digital video encoders.
+         This is a Video4Linux2 sensor driver for the OmniVision
+         OV9734 camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called saa7127.
+         module's name is ov9734.
 
-config VIDEO_SAA7185
-       tristate "Philips SAA7185 video encoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_RDACM20
+       tristate "IMI RDACM20 camera support"
+       depends on I2C
+       select V4L2_FWNODE
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
+       select VIDEO_MAX9271_LIB
        help
-         Support for the Philips SAA7185 video encoder.
+         This driver supports the IMI RDACM20 GMSL camera, used in
+         ADAS systems.
 
-         To compile this driver as a module, choose M here: the
-         module will be called saa7185.
+         This camera should be used in conjunction with a GMSL
+         deserialiser such as the MAX9286.
 
-config VIDEO_THS8200
-       tristate "Texas Instruments THS8200 video encoder"
-       depends on VIDEO_DEV && I2C
-       select V4L2_ASYNC
+config VIDEO_RDACM21
+       tristate "IMI RDACM21 camera support"
+       depends on I2C
+       select V4L2_FWNODE
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
+       select VIDEO_MAX9271_LIB
        help
-         Support for the Texas Instruments THS8200 video encoder.
-
-         To compile this driver as a module, choose M here: the
-         module will be called ths8200.
-
-endmenu
+         This driver supports the IMI RDACM21 GMSL camera, used in
+         ADAS systems.
 
-menu "Video improvement chips"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+         This camera should be used in conjunction with a GMSL
+         deserialiser such as the MAX9286.
 
-config VIDEO_UPD64031A
-       tristate "NEC Electronics uPD64031A Ghost Reduction"
-       depends on VIDEO_DEV && I2C
-       select V4L2_ASYNC
+config VIDEO_RJ54N1
+       tristate "Sharp RJ54N1CB0C sensor support"
+       depends on I2C && VIDEO_DEV
        help
-         Support for the NEC Electronics uPD64031A Ghost Reduction
-         video chip. It is most often found in NTSC TV cards made for
-         Japan and is used to reduce the 'ghosting' effect that can
-         be present in analog TV broadcasts.
+         This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
+         sensor.
 
          To compile this driver as a module, choose M here: the
-         module will be called upd64031a.
+         module will be called rj54n1.
 
-config VIDEO_UPD64083
-       tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-       depends on VIDEO_DEV && I2C
+config VIDEO_S5C73M3
+       tristate "Samsung S5C73M3 sensor support"
+       depends on I2C && SPI && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Support for the NEC Electronics uPD64083 3-Dimensional Y/C
-         separation video chip. It is used to improve the quality of
-         the colors of a composite signal.
-
-         To compile this driver as a module, choose M here: the
-         module will be called upd64083.
-
-endmenu
-
-menu "Audio/Video compression chips"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+         This is a V4L2 sensor driver for Samsung S5C73M3
+         8 Mpixel camera.
 
-config VIDEO_SAA6752HS
-       tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
-       depends on VIDEO_DEV && I2C
+config VIDEO_S5K4ECGX
+       tristate "Samsung S5K4ECGX sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        select CRC32
        help
-         Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
-         audio encoder with multiplexer.
-
-         To compile this driver as a module, choose M here: the
-         module will be called saa6752hs.
-
-endmenu
-
-menu "SDR tuner chips"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
-
-config SDR_MAX2175
-       tristate "Maxim 2175 RF to Bits tuner"
-       depends on VIDEO_DEV && MEDIA_SDR_SUPPORT && I2C
-       select REGMAP_I2C
-       select V4L2_ASYNC
-       help
-         Support for Maxim 2175 tuner. It is an advanced analog/digital
-         radio receiver with RF-to-Bits front-end designed for SDR solutions.
-
-         To compile this driver as a module, choose M here; the
-         module will be called max2175.
-
-endmenu
-
-menu "Miscellaneous helper chips"
-       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+         This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
+         camera sensor with an embedded SoC image signal processor.
 
-config VIDEO_I2C
-       tristate "I2C transport video support"
-       depends on VIDEO_DEV && I2C
-       select VIDEOBUF2_VMALLOC
-       imply HWMON
+config VIDEO_S5K5BAF
+       tristate "Samsung S5K5BAF sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
        help
-         Enable the I2C transport video support which supports the
-         following:
-          * Panasonic AMG88xx Grid-Eye Sensors
-          * Melexis MLX90640 Thermal Cameras
-
-         To compile this driver as a module, choose M here: the
-         module will be called video-i2c
+         This is a V4L2 sensor driver for Samsung S5K5BAF 2M
+         camera sensor with an embedded SoC image signal processor.
 
-config VIDEO_M52790
-       tristate "Mitsubishi M52790 A/V switch"
-       depends on VIDEO_DEV && I2C
+config VIDEO_S5K6A3
+       tristate "Samsung S5K6A3 sensor support"
+       depends on I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
        help
-        Support for the Mitsubishi M52790 A/V switch.
-
-        To compile this driver as a module, choose M here: the
-        module will be called m52790.
+         This is a V4L2 sensor driver for Samsung S5K6A3 raw
+         camera sensor.
 
-config VIDEO_ST_MIPID02
-       tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
+config VIDEO_S5K6AA
+       tristate "Samsung S5K6AAFX sensor support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
        help
-         Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
-         It is used to allow usage of CSI-2 sensor with PARALLEL port
-         controller.
+         This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
+         camera sensor with an embedded SoC image signal processor.
 
-         To compile this driver as a module, choose M here: the
-         module will be called st-mipid02.
+config VIDEO_SR030PC30
+       tristate "Siliconfile SR030PC30 sensor support"
+       depends on I2C && VIDEO_DEV
+       help
+         This driver supports SR030PC30 VGA camera from Siliconfile
 
-config VIDEO_THS7303
-       tristate "THS7303/53 Video Amplifier"
+config VIDEO_VS6624
+       tristate "ST VS6624 sensor support"
        depends on VIDEO_DEV && I2C
-       select V4L2_ASYNC
        help
-         Support for TI THS7303/53 video amplifier
+         This is a Video4Linux2 sensor driver for the ST VS6624
+         camera.
 
          To compile this driver as a module, choose M here: the
-         module will be called ths7303.
+         module will be called vs6624.
 
-endmenu
+source "drivers/media/i2c/ccs/Kconfig"
+source "drivers/media/i2c/et8ek8/Kconfig"
+source "drivers/media/i2c/m5mols/Kconfig"
 
-#
-# V4L2 I2C drivers that are related with Camera support
-#
+endmenu
 
-menu "Camera sensor devices"
+menu "Lens drivers"
        visible if MEDIA_CAMERA_SUPPORT
 
-config VIDEO_APTINA_PLL
-       tristate
-
-config VIDEO_CCS_PLL
-       tristate
+config VIDEO_AD5820
+       tristate "AD5820 lens voice coil support"
+       depends on GPIOLIB && I2C && VIDEO_DEV
+       select MEDIA_CONTROLLER
+       select V4L2_ASYNC
+       help
+         This is a driver for the AD5820 camera lens voice coil.
+         It is used for example in Nokia N900 (RX-51).
 
-config VIDEO_HI556
-       tristate "Hynix Hi-556 sensor support"
+config VIDEO_AK7375
+       tristate "AK7375 lens voice coil support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+       select V4L2_ASYNC
        help
-         This is a Video4Linux2 sensor driver for the Hynix
-         Hi-556 camera.
-
-         To compile this driver as a module, choose M here: the
-         module will be called hi556.
+         This is a driver for the AK7375 camera lens voice coil.
+         AK7375 is a 12 bit DAC with 120mA output current sink
+         capability. This is designed for linear control of
+         voice coil motors, controlled via I2C serial interface.
 
-config VIDEO_HI846
-       tristate "Hynix Hi-846 sensor support"
+config VIDEO_DW9714
+       tristate "DW9714 lens voice coil support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+       select V4L2_ASYNC
        help
-         This is a Video4Linux2 sensor driver for the Hynix
-         Hi-846 camera.
-
-         To compile this driver as a module, choose M here: the
-         module will be called hi846.
-
-config VIDEO_HI847
-        tristate "Hynix Hi-847 sensor support"
-        depends on I2C && VIDEO_DEV
-        select MEDIA_CONTROLLER
-        select VIDEO_V4L2_SUBDEV_API
-        select V4L2_FWNODE
-        help
-          This is a Video4Linux2 sensor driver for the Hynix
-          Hi-847 camera.
-
-          To compile this driver as a module, choose M here: the
-          module will be called hi847.
-
-config VIDEO_IMX208
-       tristate "Sony IMX208 sensor support"
-       depends on I2C && VIDEO_DEV && VIDEO_V4L2_SUBDEV_API
-       depends on MEDIA_CAMERA_SUPPORT
-       help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX208 camera.
-
-         To compile this driver as a module, choose M here: the
-         module will be called imx208.
+         This is a driver for the DW9714 camera lens voice coil.
+         DW9714 is a 10 bit DAC with 120mA output current sink
+         capability. This is designed for linear control of
+         voice coil motors, controlled via I2C serial interface.
 
-config VIDEO_IMX214
-       tristate "Sony IMX214 sensor support"
-       depends on GPIOLIB && I2C && VIDEO_DEV
-       select V4L2_FWNODE
+config VIDEO_DW9768
+       tristate "DW9768 lens voice coil support"
+       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select REGMAP_I2C
+       select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX214 camera.
-
-         To compile this driver as a module, choose M here: the
-         module will be called imx214.
+         This is a driver for the DW9768 camera lens voice coil.
+         DW9768 is a 10 bit DAC with 100mA output current sink
+         capability. This is designed for linear control of
+         voice coil motors, controlled via I2C serial interface.
 
-config VIDEO_IMX219
-       tristate "Sony IMX219 sensor support"
+config VIDEO_DW9807_VCM
+       tristate "DW9807 lens voice coil support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+       select V4L2_ASYNC
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX219 camera.
+         This is a driver for the DW9807 camera lens voice coil.
+         DW9807 is a 10 bit DAC with 100mA output current sink
+         capability. This is designed for linear control of
+         voice coil motors, controlled via I2C serial interface.
 
-         To compile this driver as a module, choose M here: the
-         module will be called imx219.
+endmenu
 
-config VIDEO_IMX258
-       tristate "Sony IMX258 sensor support"
+menu "Flash devices"
+       visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_ADP1653
+       tristate "ADP1653 flash support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_ASYNC
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX258 camera.
-
-         To compile this driver as a module, choose M here: the
-         module will be called imx258.
+         This is a driver for the ADP1653 flash controller. It is used for
+         example in Nokia N900.
 
-config VIDEO_IMX274
-       tristate "Sony IMX274 sensor support"
+config VIDEO_LM3560
+       tristate "LM3560 dual flash driver support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
+       select V4L2_ASYNC
        help
-         This is a V4L2 sensor driver for the Sony IMX274
-         CMOS image sensor.
+         This is a driver for the lm3560 dual flash controllers. It controls
+         flash, torch LEDs.
 
-config VIDEO_IMX290
-       tristate "Sony IMX290 sensor support"
+config VIDEO_LM3646
+       tristate "LM3646 dual flash driver support"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
        select REGMAP_I2C
-       select V4L2_FWNODE
+       select V4L2_ASYNC
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX290 camera sensor.
+         This is a driver for the lm3646 dual flash controllers. It controls
+         flash, torch LEDs.
 
-         To compile this driver as a module, choose M here: the
-         module will be called imx290.
+endmenu
 
-config VIDEO_IMX319
-       tristate "Sony IMX319 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX319 camera.
+#
+# V4L2 I2C drivers that aren't related with Camera support
+#
 
-         To compile this driver as a module, choose M here: the
-         module will be called imx319.
+comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancillary drivers'"
+       depends on MEDIA_HIDE_ANCILLARY_SUBDRV
+#
+# Encoder / Decoder module configuration
+#
 
-config VIDEO_IMX334
-       tristate "Sony IMX334 sensor support"
-       depends on OF_GPIO
-       depends on I2C && VIDEO_DEV
-       select VIDEO_V4L2_SUBDEV_API
-       select MEDIA_CONTROLLER
-       select V4L2_FWNODE
+menu "Audio decoders, processors and mixers"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_CS3308
+       tristate "Cirrus Logic CS3308 audio ADC"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX334 camera.
+         Support for the Cirrus Logic CS3308 High Performance 8-Channel
+         Analog Volume Control
 
          To compile this driver as a module, choose M here: the
-         module will be called imx334.
+         module will be called cs3308.
 
-config VIDEO_IMX335
-       tristate "Sony IMX335 sensor support"
-       depends on OF_GPIO
-       depends on I2C && VIDEO_DEV
-       select VIDEO_V4L2_SUBDEV_API
-       select MEDIA_CONTROLLER
-       select V4L2_FWNODE
+config VIDEO_CS5345
+       tristate "Cirrus Logic CS5345 audio ADC"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX335 camera.
+         Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+         stereo A/D converter.
 
          To compile this driver as a module, choose M here: the
-         module will be called imx335.
+         module will be called cs5345.
 
-config VIDEO_IMX355
-       tristate "Sony IMX355 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
+config VIDEO_CS53L32A
+       tristate "Cirrus Logic CS53L32A audio ADC"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX355 camera.
+         Support for the Cirrus Logic CS53L32A low voltage
+         stereo A/D converter.
 
          To compile this driver as a module, choose M here: the
-         module will be called imx355.
+         module will be called cs53l32a.
 
-config VIDEO_IMX412
-       tristate "Sony IMX412 sensor support"
-       depends on OF_GPIO
-       depends on I2C && VIDEO_DEV
-       select VIDEO_V4L2_SUBDEV_API
-       select MEDIA_CONTROLLER
-       select V4L2_FWNODE
+config VIDEO_MSP3400
+       tristate "Micronas MSP34xx audio decoders"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the Sony
-         IMX412 camera.
+         Support for the Micronas MSP34xx series of audio decoders.
 
          To compile this driver as a module, choose M here: the
-         module will be called imx412.
-
-config VIDEO_MAX9271_LIB
-       tristate
+         module will be called msp3400.
 
-config VIDEO_MT9M001
-       tristate "mt9m001 support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
+config VIDEO_SONY_BTF_MPX
+       tristate "Sony BTF's internal MPX"
+       depends on VIDEO_DEV && I2C
        help
-         This driver supports MT9M001 cameras from Micron, monochrome
-         and colour models.
+         Support for the internal MPX of the Sony BTF-PG472Z tuner.
 
-config VIDEO_MT9M032
-       tristate "MT9M032 camera sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select VIDEO_APTINA_PLL
-       help
-         This driver supports MT9M032 camera sensors from Aptina, monochrome
-         models only.
+         To compile this driver as a module, choose M here: the
+         module will be called sony-btf-mpx.
 
-config VIDEO_MT9M111
-       tristate "mt9m111, mt9m112 and mt9m131 support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_TDA1997X
+       tristate "NXP TDA1997x HDMI receiver"
+       depends on VIDEO_DEV && I2C
+       depends on SND_SOC
+       select HDMI
+       select SND_PCM
        select V4L2_FWNODE
-       help
-         This driver supports MT9M111, MT9M112 and MT9M131 cameras from
-         Micron/Aptina
-
-config VIDEO_MT9P031
-       tristate "Aptina MT9P031 support"
-       depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select VIDEO_APTINA_PLL
-       select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the Aptina
-         (Micron) mt9p031 5 Mpixel camera.
+         V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
 
-config VIDEO_MT9T001
-       tristate "Aptina MT9T001 support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       help
-         This is a Video4Linux2 sensor driver for the Aptina
-         (Micron) mt0t001 3 Mpixel camera.
+         To compile this driver as a module, choose M here: the
+         module will be called tda1997x.
 
-config VIDEO_MT9T112
-       tristate "Aptina MT9T111/MT9T112 support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_TDA7432
+       tristate "Philips TDA7432 audio processor"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the Aptina
-         (Micron) MT9T111 and MT9T112 3 Mpixel camera.
+         Support for tda7432 audio decoder chip found on some bt8xx boards.
 
          To compile this driver as a module, choose M here: the
-         module will be called mt9t112.
+         module will be called tda7432.
 
-config VIDEO_MT9V011
-       tristate "Micron mt9v011 sensor support"
-       depends on I2C && VIDEO_DEV
-       help
-         This is a Video4Linux2 sensor driver for the Micron
-         mt0v011 1.3 Mpixel camera.  It currently only works with the
-         em28xx driver.
-
-config VIDEO_MT9V032
-       tristate "Micron MT9V032 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select REGMAP_I2C
-       select V4L2_FWNODE
-       help
-         This is a Video4Linux2 sensor driver for the Micron
-         MT9V032 752x480 CMOS sensor.
-
-config VIDEO_MT9V111
-       tristate "Aptina MT9V111 sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_TDA9840
+       tristate "Philips TDA9840 audio processor"
+       depends on I2C
        help
-         This is a Video4Linux2 sensor driver for the Aptina/Micron
-         MT9V111 sensor.
+         Support for tda9840 audio decoder chip found on some Zoran boards.
 
          To compile this driver as a module, choose M here: the
-         module will be called mt9v111.
+         module will be called tda9840.
 
-config VIDEO_NOON010PC30
-       tristate "Siliconfile NOON010PC30 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
+config VIDEO_TEA6415C
+       tristate "Philips TEA6415C audio processor"
+       depends on I2C
        help
-         This driver supports NOON010PC30 CIF camera from Siliconfile
+         Support for tea6415c audio decoder chip found on some bt8xx boards.
 
-config VIDEO_OG01A1B
-       tristate "OmniVision OG01A1B sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+         To compile this driver as a module, choose M here: the
+         module will be called tea6415c.
+
+config VIDEO_TEA6420
+       tristate "Philips TEA6420 audio processor"
+       depends on I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OG01A1B camera.
+         Support for tea6420 audio decoder chip found on some bt8xx boards.
 
          To compile this driver as a module, choose M here: the
-         module will be called og01a1b.
+         module will be called tea6420.
 
-config VIDEO_OV02A10
-       tristate "OmniVision OV02A10 sensor support"
+config VIDEO_TLV320AIC23B
+       tristate "Texas Instruments TLV320AIC23B audio codec"
        depends on VIDEO_DEV && I2C
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV02A10 camera.
+         Support for the Texas Instruments TLV320AIC23B audio codec.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov02a10.
-
-config VIDEO_OV08D10
-        tristate "OmniVision OV08D10 sensor support"
-        depends on I2C && VIDEO_DEV
-        select MEDIA_CONTROLLER
-        select VIDEO_V4L2_SUBDEV_API
-        select V4L2_FWNODE
-        help
-          This is a Video4Linux2 sensor driver for the OmniVision
-          OV08D10 camera sensor.
-
-          To compile this driver as a module, choose M here: the
-          module will be called ov08d10.
+         module will be called tlv320aic23b.
 
-config VIDEO_OV13858
-       tristate "OmniVision OV13858 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+config VIDEO_TVAUDIO
+       tristate "Simple audio decoder chips"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV13858 camera.
+         Support for several audio decoder chips found on some bt8xx boards:
+         Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
+                  tea6320, tea6420, tda8425, ta8874z.
+         Microchip: pic16c54 based design on ProVideo PV951 board.
 
-config VIDEO_OV13B10
-       tristate "OmniVision OV13B10 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
-       help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV13B10 camera.
+         To compile this driver as a module, choose M here: the
+         module will be called tvaudio.
 
-config VIDEO_OV2640
-       tristate "OmniVision OV2640 sensor support"
+config VIDEO_UDA1342
+       tristate "Philips UDA1342 audio codec"
        depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV2640 camera.
+         Support for the Philips UDA1342 audio codec.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov2640.
+         module will be called uda1342.
 
-config VIDEO_OV2659
-       tristate "OmniVision OV2659 sensor support"
-       depends on VIDEO_DEV && I2C && GPIOLIB
-       select V4L2_FWNODE
+config VIDEO_VP27SMPX
+       tristate "Panasonic VP27's internal MPX"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV2659 camera.
+         Support for the internal MPX of the Panasonic VP27s tuner.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov2659.
+         module will be called vp27smpx.
 
-config VIDEO_OV2680
-       tristate "OmniVision OV2680 sensor support"
+config VIDEO_WM8739
+       tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
        depends on VIDEO_DEV && I2C
-       select MEDIA_CONTROLLER
-       select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV2680 camera.
+         Support for the Wolfson Microelectronics WM8739
+         stereo A/D Converter.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov2680.
+         module will be called wm8739.
 
-config VIDEO_OV2685
-       tristate "OmniVision OV2685 sensor support"
+config VIDEO_WM8775
+       tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
        depends on VIDEO_DEV && I2C
-       select MEDIA_CONTROLLER
-       select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV2685 camera.
+         Support for the Wolfson Microelectronics WM8775 high
+         performance stereo A/D Converter with a 4 channel input mixer.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov2685.
+         module will be called wm8775.
 
-config VIDEO_OV2740
-       tristate "OmniVision OV2740 sensor support"
+endmenu
+
+menu "RDS decoders"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_SAA6588
+       tristate "SAA6588 Radio Chip RDS decoder support"
        depends on VIDEO_DEV && I2C
-       depends on ACPI || COMPILE_TEST
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
-       select REGMAP_I2C
+
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV2740 camera.
+         Support for this Radio Data System (RDS) decoder. This allows
+         seeing radio station identification transmitted using this
+         standard.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov2740.
+         module will be called saa6588.
 
-config VIDEO_OV5640
-       tristate "OmniVision OV5640 sensor support"
-       depends on OF
+endmenu
+
+menu "Video decoders"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_ADV7180
+       tristate "Analog Devices ADV7180 decoder"
        depends on GPIOLIB && VIDEO_DEV && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+       select V4L2_ASYNC
        help
-         This is a Video4Linux2 sensor driver for the Omnivision
-         OV5640 camera sensor with a MIPI CSI-2 interface.
+         Support for the Analog Devices ADV7180 video decoder.
 
-config VIDEO_OV5645
-       tristate "OmniVision OV5645 sensor support"
-       depends on OF
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+         To compile this driver as a module, choose M here: the
+         module will be called adv7180.
+
+config VIDEO_ADV7183
+       tristate "Analog Devices ADV7183 decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5645 camera.
+         V4l2 subdevice driver for the Analog Devices
+         ADV7183 video decoder.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov5645.
+         module will be called adv7183.
 
-config VIDEO_OV5647
-       tristate "OmniVision OV5647 sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_ADV748X
+       tristate "Analog Devices ADV748x decoder"
+       depends on VIDEO_DEV && I2C
+       depends on OF
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
+       select REGMAP_I2C
        select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5647 camera.
+         V4L2 subdevice driver for the Analog Devices
+         ADV7481 and ADV7482 HDMI/Analog video decoders.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov5647.
+         module will be called adv748x.
 
-config VIDEO_OV5648
-       tristate "OmniVision OV5648 sensor support"
-       depends on I2C && PM && VIDEO_DEV
+config VIDEO_ADV7604
+       tristate "Analog Devices ADV7604 decoder"
+       depends on VIDEO_DEV && I2C
+       depends on GPIOLIB || COMPILE_TEST
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
+       select REGMAP_I2C
+       select HDMI
        select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5648 camera.
+         Support for the Analog Devices ADV7604 video decoder.
+
+         This is a Analog Devices Component/Graphics Digitizer
+         with 4:1 Multiplexed HDMI Receiver.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov5648.
+         module will be called adv7604.
 
-config VIDEO_OV5670
-       tristate "OmniVision OV5670 sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_ADV7604_CEC
+       bool "Enable Analog Devices ADV7604 CEC support"
+       depends on VIDEO_ADV7604
+       select CEC_CORE
+       help
+         When selected the adv7604 will support the optional
+         HDMI CEC feature.
+
+config VIDEO_ADV7842
+       tristate "Analog Devices ADV7842 decoder"
+       depends on VIDEO_DEV && I2C
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+       select HDMI
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5670 camera.
+         Support for the Analog Devices ADV7842 video decoder.
 
-         To compile this driver as a module, choose M here: the
-         module will be called ov5670.
-
-config VIDEO_OV5675
-       tristate "OmniVision OV5675 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
-       help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5675 camera.
+         This is a Analog Devices Component/Graphics/SD Digitizer
+         with 2:1 Multiplexed HDMI Receiver.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov5675.
+         module will be called adv7842.
 
-config VIDEO_OV5693
-       tristate "OmniVision OV5693 sensor support"
-       depends on I2C && VIDEO_DEV
-       select V4L2_FWNODE
+config VIDEO_ADV7842_CEC
+       bool "Enable Analog Devices ADV7842 CEC support"
+       depends on VIDEO_ADV7842
+       select CEC_CORE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5693 camera.
+         When selected the adv7842 will support the optional
+         HDMI CEC feature.
+
+config VIDEO_BT819
+       tristate "BT819A VideoStream decoder"
+       depends on VIDEO_DEV && I2C
+       help
+         Support for BT819A video decoder.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov5693.
+         module will be called bt819.
 
-config VIDEO_OV5695
-       tristate "OmniVision OV5695 sensor support"
-       depends on I2C && VIDEO_DEV
-       select V4L2_FWNODE
+config VIDEO_BT856
+       tristate "BT856 VideoStream decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV5695 camera.
+         Support for BT856 video decoder.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov5695.
+         module will be called bt856.
 
-config VIDEO_OV6650
-       tristate "OmniVision OV6650 sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_BT866
+       tristate "BT866 VideoStream decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV6650 camera.
+         Support for BT866 video decoder.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov6650.
+         module will be called bt866.
 
-config VIDEO_OV7251
-       tristate "OmniVision OV7251 sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_ISL7998X
+       tristate "Intersil ISL7998x video decoder"
+       depends on VIDEO_DEV && I2C
+       depends on OF_GPIO
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV7251 camera.
-
-         To compile this driver as a module, choose M here: the
-         module will be called ov7251.
+         Support for Intersil ISL7998x analog to MIPI-CSI2 or
+         BT.656 decoder.
 
-config VIDEO_OV7640
-       tristate "OmniVision OV7640 sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_KS0127
+       tristate "KS0127 video decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV7640 camera.
+         Support for KS0127 video decoder.
 
-         To compile this driver as a module, choose M here: the
-         module will be called ov7640.
+         This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
+         cards.
 
-config VIDEO_OV7670
-       tristate "OmniVision OV7670 sensor support"
-       depends on I2C && VIDEO_DEV
-       select V4L2_FWNODE
-       help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV7670 VGA camera.  It currently only works with the M88ALP01
-         controller.
+         To compile this driver as a module, choose M here: the
+         module will be called ks0127.
 
-config VIDEO_OV772X
-       tristate "OmniVision OV772x sensor support"
-       depends on I2C && VIDEO_DEV
-       select REGMAP_SCCB
+config VIDEO_MAX9286
+       tristate "Maxim MAX9286 GMSL deserializer support"
+       depends on I2C && I2C_MUX
+       depends on VIDEO_DEV
+       depends on OF_GPIO
        select V4L2_FWNODE
+       select VIDEO_V4L2_SUBDEV_API
+       select MEDIA_CONTROLLER
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV772x camera.
+         This driver supports the Maxim MAX9286 GMSL deserializer.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov772x.
+         module will be called max9286.
 
-config VIDEO_OV7740
-       tristate "OmniVision OV7740 sensor support"
-       depends on I2C && VIDEO_DEV
-       select REGMAP_SCCB
+config VIDEO_ML86V7667
+       tristate "OKI ML86V7667 video decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV7740 VGA camera sensor.
+         Support for the OKI Semiconductor ML86V7667 video decoder.
 
-config VIDEO_OV8856
-       tristate "OmniVision OV8856 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+         To compile this driver as a module, choose M here: the
+         module will be called ml86v7667.
+
+config VIDEO_SAA7110
+       tristate "Philips SAA7110 video decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV8856 camera sensor.
+         Support for the Philips SAA7110 video decoders.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov8856.
+         module will be called saa7110.
 
-config VIDEO_OV8865
-       tristate "OmniVision OV8865 sensor support"
-       depends on I2C && PM && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+config VIDEO_SAA711X
+       tristate "Philips SAA7111/3/4/5 video decoders"
+       depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for OmniVision
-         OV8865 camera sensor.
+         Support for the Philips SAA7111/3/4/5 video decoders.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov8865.
+         module will be called saa7115.
 
-config VIDEO_OV9282
-       tristate "OmniVision OV9282 sensor support"
-       depends on OF_GPIO
-       depends on I2C && VIDEO_DEV
-       select VIDEO_V4L2_SUBDEV_API
+config VIDEO_TC358743
+       tristate "Toshiba TC358743 decoder"
+       depends on VIDEO_DEV && I2C
        select MEDIA_CONTROLLER
+       select VIDEO_V4L2_SUBDEV_API
+       select HDMI
        select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV9282 camera sensor.
+         Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
 
          To compile this driver as a module, choose M here: the
-         module will be called ov9282.
-
-config VIDEO_OV9640
-       tristate "OmniVision OV9640 sensor support"
-       depends on I2C && VIDEO_DEV
-       help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV9640 camera sensor.
+         module will be called tc358743.
 
-config VIDEO_OV9650
-       tristate "OmniVision OV9650/OV9652 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select REGMAP_SCCB
+config VIDEO_TC358743_CEC
+       bool "Enable Toshiba TC358743 CEC support"
+       depends on VIDEO_TC358743
+       select CEC_CORE
        help
-         This is a V4L2 sensor driver for the Omnivision
-         OV9650 and OV9652 camera sensors.
+         When selected the tc358743 will support the optional
+         HDMI CEC feature.
 
-config VIDEO_OV9734
-       tristate "OmniVision OV9734 sensor support"
+config VIDEO_TVP514X
+       tristate "Texas Instruments TVP514x video decoder"
        depends on VIDEO_DEV && I2C
-       depends on ACPI || COMPILE_TEST
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
        select V4L2_FWNODE
        help
-         This is a Video4Linux2 sensor driver for the OmniVision
-         OV9734 camera.
+         This is a Video4Linux2 sensor driver for the TI TVP5146/47
+         decoder. It is currently working with the TI OMAP3 camera
+         controller.
 
          To compile this driver as a module, choose M here: the
-         module's name is ov9734.
+         module will be called tvp514x.
 
-config VIDEO_RDACM20
-       tristate "IMI RDACM20 camera support"
-       depends on I2C
+config VIDEO_TVP5150
+       tristate "Texas Instruments TVP5150 video decoder"
+       depends on VIDEO_DEV && I2C
        select V4L2_FWNODE
-       select VIDEO_V4L2_SUBDEV_API
-       select MEDIA_CONTROLLER
-       select VIDEO_MAX9271_LIB
+       select REGMAP_I2C
        help
-         This driver supports the IMI RDACM20 GMSL camera, used in
-         ADAS systems.
+         Support for the Texas Instruments TVP5150 video decoder.
 
-         This camera should be used in conjunction with a GMSL
-         deserialiser such as the MAX9286.
+         To compile this driver as a module, choose M here: the
+         module will be called tvp5150.
 
-config VIDEO_RDACM21
-       tristate "IMI RDACM21 camera support"
-       depends on I2C
+config VIDEO_TVP7002
+       tristate "Texas Instruments TVP7002 video decoder"
+       depends on VIDEO_DEV && I2C
        select V4L2_FWNODE
-       select VIDEO_V4L2_SUBDEV_API
-       select MEDIA_CONTROLLER
-       select VIDEO_MAX9271_LIB
        help
-         This driver supports the IMI RDACM21 GMSL camera, used in
-         ADAS systems.
+         Support for the Texas Instruments TVP7002 video decoder.
 
-         This camera should be used in conjunction with a GMSL
-         deserialiser such as the MAX9286.
+         To compile this driver as a module, choose M here: the
+         module will be called tvp7002.
 
-config VIDEO_RJ54N1
-       tristate "Sharp RJ54N1CB0C sensor support"
-       depends on I2C && VIDEO_DEV
+config VIDEO_TW2804
+       tristate "Techwell TW2804 multiple video decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
-         sensor.
+         Support for the Techwell tw2804 multiple video decoder.
 
          To compile this driver as a module, choose M here: the
-         module will be called rj54n1.
+         module will be called tw2804.
 
-config VIDEO_S5C73M3
-       tristate "Samsung S5C73M3 sensor support"
-       depends on I2C && SPI && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+config VIDEO_TW9903
+       tristate "Techwell TW9903 video decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a V4L2 sensor driver for Samsung S5C73M3
-         8 Mpixel camera.
+         Support for the Techwell tw9903 multi-standard video decoder
+         with high quality down scaler.
 
-config VIDEO_S5K4ECGX
-       tristate "Samsung S5K4ECGX sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select CRC32
-       help
-         This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
-         camera sensor with an embedded SoC image signal processor.
+         To compile this driver as a module, choose M here: the
+         module will be called tw9903.
 
-config VIDEO_S5K5BAF
-       tristate "Samsung S5K5BAF sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+config VIDEO_TW9906
+       tristate "Techwell TW9906 video decoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a V4L2 sensor driver for Samsung S5K5BAF 2M
-         camera sensor with an embedded SoC image signal processor.
+         Support for the Techwell tw9906 enhanced multi-standard comb filter
+         video decoder with YCbCr input support.
 
-config VIDEO_S5K6A3
-       tristate "Samsung S5K6A3 sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       help
-         This is a V4L2 sensor driver for Samsung S5K6A3 raw
-         camera sensor.
+         To compile this driver as a module, choose M here: the
+         module will be called tw9906.
 
-config VIDEO_S5K6AA
-       tristate "Samsung S5K6AAFX sensor support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
+config VIDEO_TW9910
+       tristate "Techwell TW9910 video decoder"
+       depends on VIDEO_DEV && I2C
+       select V4L2_ASYNC
        help
-         This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
-         camera sensor with an embedded SoC image signal processor.
+         Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
 
-config VIDEO_SR030PC30
-       tristate "Siliconfile SR030PC30 sensor support"
-       depends on I2C && VIDEO_DEV
+         To compile this driver as a module, choose M here: the
+         module will be called tw9910.
+
+config VIDEO_VPX3220
+       tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
+       depends on VIDEO_DEV && I2C
        help
-         This driver supports SR030PC30 VGA camera from Siliconfile
+         Support for VPX322x video decoders.
 
-config VIDEO_VS6624
-       tristate "ST VS6624 sensor support"
+         To compile this driver as a module, choose M here: the
+         module will be called vpx3220.
+
+comment "Video and audio decoders"
+
+config VIDEO_SAA717X
+       tristate "Philips SAA7171/3/4 audio/video decoders"
        depends on VIDEO_DEV && I2C
        help
-         This is a Video4Linux2 sensor driver for the ST VS6624
-         camera.
+         Support for the Philips SAA7171/3/4 audio/video decoders.
 
          To compile this driver as a module, choose M here: the
-         module will be called vs6624.
+         module will be called saa717x.
 
-source "drivers/media/i2c/ccs/Kconfig"
-source "drivers/media/i2c/et8ek8/Kconfig"
-source "drivers/media/i2c/m5mols/Kconfig"
+source "drivers/media/i2c/cx25840/Kconfig"
 
 endmenu
 
-menu "Lens drivers"
-       visible if MEDIA_CAMERA_SUPPORT
+menu "Video encoders"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
-config VIDEO_AD5820
-       tristate "AD5820 lens voice coil support"
-       depends on GPIOLIB && I2C && VIDEO_DEV
+config VIDEO_AD9389B
+       tristate "Analog Devices AD9389B encoder"
+       depends on VIDEO_DEV && I2C
        select MEDIA_CONTROLLER
-       select V4L2_ASYNC
+       select VIDEO_V4L2_SUBDEV_API
+
        help
-         This is a driver for the AD5820 camera lens voice coil.
-         It is used for example in Nokia N900 (RX-51).
+         Support for the Analog Devices AD9389B video encoder.
 
-config VIDEO_AK7375
-       tristate "AK7375 lens voice coil support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_ASYNC
+         This is a Analog Devices HDMI transmitter.
+
+         To compile this driver as a module, choose M here: the
+         module will be called ad9389b.
+
+config VIDEO_ADV7170
+       tristate "Analog Devices ADV7170 video encoder"
+       depends on VIDEO_DEV && I2C
        help
-         This is a driver for the AK7375 camera lens voice coil.
-         AK7375 is a 12 bit DAC with 120mA output current sink
-         capability. This is designed for linear control of
-         voice coil motors, controlled via I2C serial interface.
+         Support for the Analog Devices ADV7170 video encoder driver
 
-config VIDEO_DW9714
-       tristate "DW9714 lens voice coil support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
+         To compile this driver as a module, choose M here: the
+         module will be called adv7170.
+
+config VIDEO_ADV7175
+       tristate "Analog Devices ADV7175 video encoder"
+       depends on VIDEO_DEV && I2C
+       help
+         Support for the Analog Devices ADV7175 video encoder driver
+
+         To compile this driver as a module, choose M here: the
+         module will be called adv7175.
+
+config VIDEO_ADV7343
+       tristate "ADV7343 video encoder"
+       depends on I2C
        select V4L2_ASYNC
        help
-         This is a driver for the DW9714 camera lens voice coil.
-         DW9714 is a 10 bit DAC with 120mA output current sink
-         capability. This is designed for linear control of
-         voice coil motors, controlled via I2C serial interface.
+         Support for Analog Devices I2C bus based ADV7343 encoder.
 
-config VIDEO_DW9768
-       tristate "DW9768 lens voice coil support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
-       select VIDEO_V4L2_SUBDEV_API
-       select V4L2_FWNODE
+         To compile this driver as a module, choose M here: the
+         module will be called adv7343.
+
+config VIDEO_ADV7393
+       tristate "ADV7393 video encoder"
+       depends on I2C
        help
-         This is a driver for the DW9768 camera lens voice coil.
-         DW9768 is a 10 bit DAC with 100mA output current sink
-         capability. This is designed for linear control of
-         voice coil motors, controlled via I2C serial interface.
+         Support for Analog Devices I2C bus based ADV7393 encoder.
 
-config VIDEO_DW9807_VCM
-       tristate "DW9807 lens voice coil support"
-       depends on I2C && VIDEO_DEV
+         To compile this driver as a module, choose M here: the
+         module will be called adv7393.
+
+config VIDEO_ADV7511
+       tristate "Analog Devices ADV7511 encoder"
+       depends on VIDEO_DEV && I2C
+       depends on DRM_I2C_ADV7511=n || COMPILE_TEST
        select MEDIA_CONTROLLER
        select VIDEO_V4L2_SUBDEV_API
+       select HDMI
+       help
+         Support for the Analog Devices ADV7511 video encoder.
+
+         This is a Analog Devices HDMI transmitter.
+
+         To compile this driver as a module, choose M here: the
+         module will be called adv7511.
+
+config VIDEO_ADV7511_CEC
+       bool "Enable Analog Devices ADV7511 CEC support"
+       depends on VIDEO_ADV7511
+       select CEC_CORE
+       help
+         When selected the adv7511 will support the optional
+         HDMI CEC feature.
+
+config VIDEO_AK881X
+       tristate "AK8813/AK8814 video encoders"
+       depends on I2C
+       help
+         Video output driver for AKM AK8813 and AK8814 TV encoders
+
+config VIDEO_SAA7127
+       tristate "Philips SAA7127/9 digital video encoders"
+       depends on VIDEO_DEV && I2C
+       help
+         Support for the Philips SAA7127/9 digital video encoders.
+
+         To compile this driver as a module, choose M here: the
+         module will be called saa7127.
+
+config VIDEO_SAA7185
+       tristate "Philips SAA7185 video encoder"
+       depends on VIDEO_DEV && I2C
+       help
+         Support for the Philips SAA7185 video encoder.
+
+         To compile this driver as a module, choose M here: the
+         module will be called saa7185.
+
+config VIDEO_THS8200
+       tristate "Texas Instruments THS8200 video encoder"
+       depends on VIDEO_DEV && I2C
        select V4L2_ASYNC
        help
-         This is a driver for the DW9807 camera lens voice coil.
-         DW9807 is a 10 bit DAC with 100mA output current sink
-         capability. This is designed for linear control of
-         voice coil motors, controlled via I2C serial interface.
+         Support for the Texas Instruments THS8200 video encoder.
+
+         To compile this driver as a module, choose M here: the
+         module will be called ths8200.
 
 endmenu
 
-menu "Flash devices"
-       visible if MEDIA_CAMERA_SUPPORT
+menu "Video improvement chips"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
 
-config VIDEO_ADP1653
-       tristate "ADP1653 flash support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
+config VIDEO_UPD64031A
+       tristate "NEC Electronics uPD64031A Ghost Reduction"
+       depends on VIDEO_DEV && I2C
        select V4L2_ASYNC
        help
-         This is a driver for the ADP1653 flash controller. It is used for
-         example in Nokia N900.
+         Support for the NEC Electronics uPD64031A Ghost Reduction
+         video chip. It is most often found in NTSC TV cards made for
+         Japan and is used to reduce the 'ghosting' effect that can
+         be present in analog TV broadcasts.
 
-config VIDEO_LM3560
-       tristate "LM3560 dual flash driver support"
-       depends on I2C && VIDEO_DEV
-       select MEDIA_CONTROLLER
+         To compile this driver as a module, choose M here: the
+         module will be called upd64031a.
+
+config VIDEO_UPD64083
+       tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+       depends on VIDEO_DEV && I2C
+       help
+         Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+         separation video chip. It is used to improve the quality of
+         the colors of a composite signal.
+
+         To compile this driver as a module, choose M here: the
+         module will be called upd64083.
+
+endmenu
+
+menu "Audio/Video compression chips"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_SAA6752HS
+       tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
+       depends on VIDEO_DEV && I2C
+       select CRC32
+       help
+         Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
+         audio encoder with multiplexer.
+
+         To compile this driver as a module, choose M here: the
+         module will be called saa6752hs.
+
+endmenu
+
+menu "SDR tuner chips"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config SDR_MAX2175
+       tristate "Maxim 2175 RF to Bits tuner"
+       depends on VIDEO_DEV && MEDIA_SDR_SUPPORT && I2C
        select REGMAP_I2C
        select V4L2_ASYNC
        help
-         This is a driver for the lm3560 dual flash controllers. It controls
-         flash, torch LEDs.
+         Support for Maxim 2175 tuner. It is an advanced analog/digital
+         radio receiver with RF-to-Bits front-end designed for SDR solutions.
 
-config VIDEO_LM3646
-       tristate "LM3646 dual flash driver support"
+         To compile this driver as a module, choose M here; the
+         module will be called max2175.
+
+endmenu
+
+menu "Miscellaneous helper chips"
+       visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+
+config VIDEO_I2C
+       tristate "I2C transport video support"
+       depends on VIDEO_DEV && I2C
+       select VIDEOBUF2_VMALLOC
+       imply HWMON
+       help
+         Enable the I2C transport video support which supports the
+         following:
+          * Panasonic AMG88xx Grid-Eye Sensors
+          * Melexis MLX90640 Thermal Cameras
+
+         To compile this driver as a module, choose M here: the
+         module will be called video-i2c
+
+config VIDEO_M52790
+       tristate "Mitsubishi M52790 A/V switch"
+       depends on VIDEO_DEV && I2C
+       help
+        Support for the Mitsubishi M52790 A/V switch.
+
+        To compile this driver as a module, choose M here: the
+        module will be called m52790.
+
+config VIDEO_ST_MIPID02
+       tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
        depends on I2C && VIDEO_DEV
        select MEDIA_CONTROLLER
-       select REGMAP_I2C
+       select VIDEO_V4L2_SUBDEV_API
+       select V4L2_FWNODE
+       help
+         Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
+         It is used to allow usage of CSI-2 sensor with PARALLEL port
+         controller.
+
+         To compile this driver as a module, choose M here: the
+         module will be called st-mipid02.
+
+config VIDEO_THS7303
+       tristate "THS7303/53 Video Amplifier"
+       depends on VIDEO_DEV && I2C
        select V4L2_ASYNC
        help
-         This is a driver for the lm3646 dual flash controllers. It controls
-         flash, torch LEDs.
+         Support for TI THS7303/53 video amplifier
+
+         To compile this driver as a module, choose M here: the
+         module will be called ths7303.
 
 endmenu