status = "disabled";
};
+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";