serial: omap: don't access the platform_device

The driver doesn't need to know about its platform_device.

Everything the driver needs can be done through the
struct device pointer. In case we need to use the
OMAP-specific PM function pointers, those can make
sure to find the device's platform_device pointer
so they can find the struct omap_device through
pdev->archdata field.

Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 25d53b2..9e80d20 100644 (file)
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
 };
 
 #ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {
+       struct platform_device *pdev = to_platform_device(dev);
        struct omap_device *od = to_omap_device(pdev);
 
        if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
  * in Smartidle Mode When Configured for DMA Operations.
  * WA: configure uart in force idle mode.
  */
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
 {
+       struct platform_device *pdev = to_platform_device(dev);
        struct omap_device *od = to_omap_device(pdev);
 
        omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
 }
 
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
 {
+       struct platform_device *pdev = to_platform_device(dev);
        struct omap_device *od = to_omap_device(pdev);
        u8 idlemode;
 
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
 }
 
 #else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX

diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 5cc0626..90d2d74 100644 (file)
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,7 +18,7 @@
 #define __OMAP_SERIAL_H__
 
 #include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
 #include <linux/pm_qos.h>
 
 #include <plat/mux.h>
@@ -74,9 +74,9 @@ struct omap_uart_port_info {
        int                     DTR_present;
 
        int (*get_context_loss_count)(struct device *);
-       void (*set_forceidle)(struct platform_device *);
-       void (*set_noidle)(struct platform_device *);
-       void (*enable_wakeup)(struct platform_device *, bool);
+       void (*set_forceidle)(struct device *);
+       void (*set_noidle)(struct device *);
+       void (*enable_wakeup)(struct device *, bool);
 };
 
 struct uart_omap_dma {
@@ -108,7 +108,7 @@ struct uart_omap_dma {
 struct uart_omap_port {
        struct uart_port        port;
        struct uart_omap_dma    uart_dma;
-       struct platform_device  *pdev;
+       struct device           *dev;
 
        unsigned char           ier;
        unsigned char           lcr;

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 3a60b86..5af5d22 100644 (file)
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -104,36 +104,36 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
 
 static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
 {
-       struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+       struct omap_uart_port_info *pdata = up->dev->platform_data;
 
        if (!pdata->get_context_loss_count)
                return 0;
 
-       return pdata->get_context_loss_count(&up->pdev->dev);
+       return pdata->get_context_loss_count(up->dev);
 }
 
 static void serial_omap_set_forceidle(struct uart_omap_port *up)
 {
-       struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+       struct omap_uart_port_info *pdata = up->dev->platform_data;
 
        if (pdata->set_forceidle)
-               pdata->set_forceidle(up->pdev);
+               pdata->set_forceidle(up->dev);
 }
 
 static void serial_omap_set_noidle(struct uart_omap_port *up)
 {
-       struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+       struct omap_uart_port_info *pdata = up->dev->platform_data;
 
        if (pdata->set_noidle)
-               pdata->set_noidle(up->pdev);
+               pdata->set_noidle(up->dev);
 }
 
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
-       struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+       struct omap_uart_port_info *pdata = up->dev->platform_data;
 
        if (pdata->enable_wakeup)
-               pdata->enable_wakeup(up->pdev, enable);
+               pdata->enable_wakeup(up->dev, enable);
 }
 
 /*
@@ -169,8 +169,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up)
                omap_free_dma(up->uart_dma.rx_dma_channel);
                up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
                up->uart_dma.rx_dma_used = false;
-               pm_runtime_mark_last_busy(&up->pdev->dev);
-               pm_runtime_put_autosuspend(&up->pdev->dev);
+               pm_runtime_mark_last_busy(up->dev);
+               pm_runtime_put_autosuspend(up->dev);
        }
 }
 
@@ -180,16 +180,16 @@ static void serial_omap_enable_ms(struct uart_port *port)
 
        dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        up->ier |= UART_IER_MSI;
        serial_out(up, UART_IER, up->ier);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
 }
 
 static void serial_omap_stop_tx(struct uart_port *port)
 {
        struct uart_omap_port *up = to_uart_omap_port(port);
-       struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+       struct omap_uart_port_info *pdata = up->dev->platform_data;
 
        if (up->use_dma &&
                up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
@@ -202,11 +202,11 @@ static void serial_omap_stop_tx(struct uart_port *port)
                omap_stop_dma(up->uart_dma.tx_dma_channel);
                omap_free_dma(up->uart_dma.tx_dma_channel);
                up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
-               pm_runtime_mark_last_busy(&up->pdev->dev);
-               pm_runtime_put_autosuspend(&up->pdev->dev);
+               pm_runtime_mark_last_busy(up->dev);
+               pm_runtime_put_autosuspend(up->dev);
        }
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        if (up->ier & UART_IER_THRI) {
                up->ier &= ~UART_IER_THRI;
                serial_out(up, UART_IER, up->ier);
@@ -215,22 +215,22 @@ static void serial_omap_stop_tx(struct uart_port *port)
        if (!up->use_dma && pdata)
                serial_omap_set_forceidle(up);
 
-       pm_runtime_mark_last_busy(&up->pdev->dev);
-       pm_runtime_put_autosuspend(&up->pdev->dev);
+       pm_runtime_mark_last_busy(up->dev);
+       pm_runtime_put_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_rx(struct uart_port *port)
 {
        struct uart_omap_port *up = to_uart_omap_port(port);
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        if (up->use_dma)
                serial_omap_stop_rxdma(up);
        up->ier &= ~UART_IER_RLSI;
        up->port.read_status_mask &= ~UART_LSR_DR;
        serial_out(up, UART_IER, up->ier);
-       pm_runtime_mark_last_busy(&up->pdev->dev);
-       pm_runtime_put_autosuspend(&up->pdev->dev);
+       pm_runtime_mark_last_busy(up->dev);
+       pm_runtime_put_autosuspend(up->dev);
 }
 
 static inline void receive_chars(struct uart_omap_port *up,
@@ -348,11 +348,11 @@ static void serial_omap_start_tx(struct uart_port *port)
        int ret = 0;
 
        if (!up->use_dma) {
-               pm_runtime_get_sync(&up->pdev->dev);
+               pm_runtime_get_sync(up->dev);
                serial_omap_enable_ier_thri(up);
                serial_omap_set_noidle(up);
-               pm_runtime_mark_last_busy(&up->pdev->dev);
-               pm_runtime_put_autosuspend(&up->pdev->dev);
+               pm_runtime_mark_last_busy(up->dev);
+               pm_runtime_put_autosuspend(up->dev);
                return;
        }
 
@@ -362,7 +362,7 @@ static void serial_omap_start_tx(struct uart_port *port)
        xmit = &up->port.state->xmit;
 
        if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
-               pm_runtime_get_sync(&up->pdev->dev);
+               pm_runtime_get_sync(up->dev);
                ret = omap_request_dma(up->uart_dma.uart_dma_tx,
                                "UART Tx DMA",
                                (void *)uart_tx_dma_callback, up,
@@ -445,11 +445,11 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
        unsigned int iir, lsr;
        unsigned long flags;
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        iir = serial_in(up, UART_IIR);
        if (iir & UART_IIR_NO_INT) {
-               pm_runtime_mark_last_busy(&up->pdev->dev);
-               pm_runtime_put_autosuspend(&up->pdev->dev);
+               pm_runtime_mark_last_busy(up->dev);
+               pm_runtime_put_autosuspend(up->dev);
                return IRQ_NONE;
        }
 
@@ -473,8 +473,8 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
                transmit_chars(up);
 
        spin_unlock_irqrestore(&up->port.lock, flags);
-       pm_runtime_mark_last_busy(&up->pdev->dev);
-       pm_runtime_put_autosuspend(&up->pdev->dev);
+       pm_runtime_mark_last_busy(up->dev);
+       pm_runtime_put_autosuspend(up->dev);
 
        up->port_activity = jiffies;
        return IRQ_HANDLED;
@@ -486,12 +486,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
        unsigned long flags = 0;
        unsigned int ret = 0;
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
        spin_lock_irqsave(&up->port.lock, flags);
        ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
        spin_unlock_irqrestore(&up->port.lock, flags);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
        return ret;
 }
 
@@ -501,9 +501,9 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
        unsigned int status;
        unsigned int ret = 0;
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        status = check_modem_status(up);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
 
        dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
 
@@ -535,11 +535,11 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
        if (mctrl & TIOCM_LOOP)
                mcr |= UART_MCR_LOOP;
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        up->mcr = serial_in(up, UART_MCR);
        up->mcr |= mcr;
        serial_out(up, UART_MCR, up->mcr);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
 
        if (gpio_is_valid(up->DTR_gpio) &&
            !!(mctrl & TIOCM_DTR) != up->DTR_active) {
@@ -558,7 +558,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
        unsigned long flags = 0;
 
        dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        spin_lock_irqsave(&up->port.lock, flags);
        if (break_state == -1)
                up->lcr |= UART_LCR_SBC;
@@ -566,7 +566,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
                up->lcr &= ~UART_LCR_SBC;
        serial_out(up, UART_LCR, up->lcr);
        spin_unlock_irqrestore(&up->port.lock, flags);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
 }
 
 static int serial_omap_startup(struct uart_port *port)
@@ -585,7 +585,7 @@ static int serial_omap_startup(struct uart_port *port)
 
        dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        /*
         * Clear the FIFO buffers and disable them.
         * (they will be reenabled in set_termios())
@@ -641,8 +641,8 @@ static int serial_omap_startup(struct uart_port *port)
        /* Enable module level wake up */
        serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
 
-       pm_runtime_mark_last_busy(&up->pdev->dev);
-       pm_runtime_put_autosuspend(&up->pdev->dev);
+       pm_runtime_mark_last_busy(up->dev);
+       pm_runtime_put_autosuspend(up->dev);
        up->port_activity = jiffies;
        return 0;
 }
@@ -654,7 +654,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 
        dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        /*
         * Disable interrupts from this port
         */
@@ -689,7 +689,7 @@ static void serial_omap_shutdown(struct uart_port *port)
                up->uart_dma.rx_buf = NULL;
        }
 
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
        free_irq(up->port.irq, up);
 }
 
@@ -821,7 +821,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
         * Ok, we're now changing the port state. Do it with
         * interrupts disabled.
         */
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        spin_lock_irqsave(&up->port.lock, flags);
 
        /*
@@ -970,7 +970,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        serial_omap_configure_xonxoff(up, termios);
 
        spin_unlock_irqrestore(&up->port.lock, flags);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
        dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
@@ -983,7 +983,7 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 
        dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
        efr = serial_in(up, UART_EFR);
        serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -994,14 +994,14 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
        serial_out(up, UART_EFR, efr);
        serial_out(up, UART_LCR, 0);
 
-       if (!device_may_wakeup(&up->pdev->dev)) {
+       if (!device_may_wakeup(up->dev)) {
                if (!state)
-                       pm_runtime_forbid(&up->pdev->dev);
+                       pm_runtime_forbid(up->dev);
                else
-                       pm_runtime_allow(&up->pdev->dev);
+                       pm_runtime_allow(up->dev);
        }
 
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
@@ -1080,10 +1080,10 @@ static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
 {
        struct uart_omap_port *up = to_uart_omap_port(port);
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        wait_for_xmitr(up);
        serial_out(up, UART_TX, ch);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
 }
 
 static int serial_omap_poll_get_char(struct uart_port *port)
@@ -1091,13 +1091,13 @@ static int serial_omap_poll_get_char(struct uart_port *port)
        struct uart_omap_port *up = to_uart_omap_port(port);
        unsigned int status;
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
        status = serial_in(up, UART_LSR);
        if (!(status & UART_LSR_DR))
                return NO_POLL_CHAR;
 
        status = serial_in(up, UART_RX);
-       pm_runtime_put(&up->pdev->dev);
+       pm_runtime_put(up->dev);
        return status;
 }
 
@@ -1126,7 +1126,7 @@ serial_omap_console_write(struct console *co, const char *s,
        unsigned int ier;
        int locked = 1;
 
-       pm_runtime_get_sync(&up->pdev->dev);
+       pm_runtime_get_sync(up->dev);
 
        local_irq_save(flags);
        if (up->port.sysrq)
@@ -1160,8 +1160,8 @@ serial_omap_console_write(struct console *co, const char *s,
        if (up->msr_saved_flags)
                check_modem_status(up);
 
-       pm_runtime_mark_last_busy(&up->pdev->dev);
-       pm_runtime_put_autosuspend(&up->pdev->dev);
+       pm_runtime_mark_last_busy(up->dev);
+       pm_runtime_put_autosuspend(up->dev);
        if (locked)
                spin_unlock(&up->port.lock);
        local_irq_restore(flags);
@@ -1323,7 +1323,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up)
        int ret = 0;
 
        if (up->uart_dma.rx_dma_channel == -1) {
-               pm_runtime_get_sync(&up->pdev->dev);
+               pm_runtime_get_sync(up->dev);
                ret = omap_request_dma(up->uart_dma.uart_dma_rx,
                                "UART Rx DMA",
                                (void *)uart_rx_dma_callback, up,
@@ -1435,7 +1435,7 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
                minor = (mvr & OMAP_UART_MVR_MIN_MASK);
                break;
        default:
-               dev_warn(&up->pdev->dev,
+               dev_warn(up->dev,
                        "Unknown %s revision, defaulting to highest\n",
                        up->name);
                /* highest possible revision */
@@ -1535,7 +1535,7 @@ static int serial_omap_probe(struct platform_device *pdev)
                up->DTR_gpio = -EINVAL;
        up->DTR_active = 0;
 
-       up->pdev = pdev;
+       up->dev = &pdev->dev;
        up->port.dev = &pdev->dev;
        up->port.type = PORT_OMAP;
        up->port.iotype = UPIO_MEM;
@@ -1632,7 +1632,7 @@ static int serial_omap_remove(struct platform_device *dev)
        struct uart_omap_port *up = platform_get_drvdata(dev);
 
        if (up) {
-               pm_runtime_disable(&up->pdev->dev);
+               pm_runtime_disable(up->dev);
                uart_remove_one_port(&serial_omap_reg, &up->port);
                pm_qos_remove_request(&up->pm_qos_request);
        }
@@ -1667,7 +1667,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
                timeout--;
                if (!timeout) {
                        /* Should *never* happen. we warn and carry on */
-                       dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n",
+                       dev_crit(up->dev, "Errata i202: timedout %x\n",
                                                serial_in(up, UART_LSR));
                        break;
                }